bissell 1698 carpet cleaner owner's manual

7/31/2019 Bissell 1698 Carpet Cleaner Owner's Manual

1/20


2/20

2

Were glad you purchased a BISSELL PowerSteamer deep cleaner. Everything

we know about floor care went into the design and construction of this

complete, high-tech home cleaning system.

Your PowerSteamer is well made, and we back it with a limited one-

year warranty. We also stand behind it with a knowledgeable, dedicated

Consumer Services department, so, should you ever have a problem, youll

receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is

a global leader in the design, manufacture, and service of high quality

homecare products like your PowerSteamer .

Thanks again, from all of us at BISSELL.

Mark J. Bissell

President and Chief Executive Officer

Thanks for buying a BISSELL PowerSteamer

2 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

ug120-4074_1697_908.indd 2 10/14/08 12:57:04 PM


3/20

3

3w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

IMPORTANT SAFETY INSTRUCTIONSWhen using an electrical appliance, basic precautionsshould be observed, including the following:

Rd ll insrucins bfr using yurPoweRSteameR

WARNING:t rduc h riskf fir, lcric shck, r injury: D n irs. Us nly n surfcs isnd by clning prcss. alys cnnc prprly grundd ul. S Grunding Insrucins.

Unplug fr ul hn n in us nd bfrcnducing innnc r rublshing. D n lv chin hn i is pluggd in. D n srvic chin hn i is pluggd in. D n us ih dgd crd r plug. If pplinc is n rking s i shuld, hs bn

drppd, dgd, lf udrs, r drppd inr, hv i rpird n uhrizd Srvic Cnr.

Us indrs nly. D n pull r crry by crd, us crd s hndl,

cls dr n crd, pull crd rund shrp crnrs

r dgs, run pplinc vr crd, r xps crd hd surfcs.

D n crry h pplinc hil in us. D n unplug by pulling n crd. Unplug by grsping

h plug, n h crd. D n hndl plug r pplinc ih hnds. D n pu ny bjc in pplinc pnings, us ih

blckd pning, r rsric ir fl. D n xps hir, ls clhing, fingrs r bdy

prs pnings r ving prs.

D n pick up h r burning bjcs. D n pick up flbl r cbusibl rils

(lighr fluid, gslin, krsn, c.) r us in hprsnc f xplsiv liquids r vpr.

D n us pplinc in n nclsd spc filld ih vprsgivn ff by il bs pin, pin hinnr, s h prfingsubsncs, flbl dus, r hr xplsiv r xic vprs.

D n pick up xic ril (chlrin blch, ni,drin clnr, gslin, c.).

D n dify h 3-prng grundd plug. D n ll b usd s y. D n us fr ny purps hr hn dscribd in

his Usrs Guid. D n pr h pplinc unlss h bl dr is

scurly ssbld in h lcin prvidd. Us nly nufcurrs rcndd chns. Us nly clning prducs fruld by BISSeLL fr

us in his pplinc prvn inrnl cpnndg. S h clning fluid scin f his guid.

Kp pnings fr f dus, lin, hir, c.

D n pin chn nzzl ppl r nils Kp pplinc n lvl surfc. turn ff ll cnrls bfr unplugging. Unplug bfr ching h turbBrush.

B xr crful hn clning sirs. Cls nin is ncssry hn usd by r nr childrn.WARNING: th Pr Crd n his prduc cnins

ld, chicl knn h S f Clifrni cus birh dfcs r hr rprduciv hr.

Wash hand after handling.

SAVE THESEINSTRUCTIONS.GROUNDING INSTRUCTIONSthis pplinc us b cnncd grunddiring sys. If i shuld lfuncin r brkdn, grunding prvids sf ph f lsrsisnc fr lcricl currn, rducing h risk flcricl shck. th crd fr his pplinc hs n

quipn-grunding cnducr nd grundingplug. I us nly b pluggd in n ul h isprprly inslld nd grundd in ccrdnc ihll lcl cds nd rdinncs.

WARNING:Improperconnection of the equipment-groundingconductor can result in a risk of electricalshock. Check with a qualified electrician orservice person if you arent sure if the outletis properly grounded. DO NOT MODIFY THEPLUG. If it will not fit the outlet, have aproper outlet installed by a qualifiedelectrician. This appliance is designed foruse on a nominal 120-volt circuit, and has agrounding attachment plug that looks likethe plug in the drawing above. Make certainthat the appliance is connected to an outlethaving the same configuration as the plug.No plug adapter should be used with thisappliance.

This model is for household uses only.

GroundedOutlets

Grounding Pin

ug120-4074_1697_908.indd 3 10/14/08 12:57:04 PM


4/20

4 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Optional Accessories:

Spraying Crevice Tool

3 Tough Stain Brush 4 Upholstery Tool PreTreat Wand TurboBrush Hard Floor Tool

Mesh Tool Bag

(bag only)

These items are available for purchase with your model. To order replacement parts or additional tools orformulas, please refer to page 19.

TurboBrushStorage(Select Models)

SmartMixSwitch

SmartMixTank

DirtLifterPowerBrush

Floor NozzleWindow

Belt Access Door

ReadyTools Dial

Flow Indicator(Filter Inside)

Lower Handle

ug120-4074_1697_908.indd 4 10/14/08 12:57:06 PM


5/20

Keep plenty of genuine BISSELLAdvanced Cleaning Formulas on handso you can clean whenever it fits yourschedule. Always use genuine BISSELLdeep cleaning formulas. Non-BISSELLcleaning solutions may harm themachine and will void the warranty.

5w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Trigger

Upper HandleTool Caddy

Power CordQuick Release

Tough StainBrush Storage

Hex Nuts

4" UpholsteryTool Storage(Select Models)

Flex Hose

Handle Release

2-in-1 watertank

BISSELL Formulas:

These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 19.

48 oz. BISSELLFiber CleansingFormulawithScotchgard

Protector

#0710

48 oz. BISSELLMulti- AllergenRemovalFormulawithScotchgard

Protector#0720

48 oz. BISSELLPet Odor and SoilRemovalFormulawith Scotchgard

Protector

#0730

48 oz. BISSELLNatural OrangeExtract Formula

with Scotchgard

Protector

#0740

32 oz.BISSELLHard FloorSolutions

Formula#0484

22 oz.BISSELLTough StainPreCleaner

#0400

48 oz. BISSELLLavender EssenceFormulawithScotchgard

Protector

#0750

43 oz. BISSELL3X ConcentratedFiber CleansingFormula withScotchgardProtector#0716

ug120-4074_1697_908.indd 5 10/14/08 12:57:10 PM


6/20

This users guide has been designed to help youget the utmost satisfaction from your BISSELL

PowerSteamer. Youll find assembly and operat-ing instructions, safety precautions, as well asmaintenance and troubleshooting instructions.Please read this guide thoroughly beforeassembling your deep cleaner.

Pay particular attention to the product diagram, assembly

instructions, and part names. Locate and organize all parts

before assembly. Familiarize yourself with the parts and

where they go. Following this users guide will greatly

enhance your ability to get the most performance from your

BISSELL PowerSteamer for many years.

YourPowerSteamer comes in three, easy toassemble components:

Upper Handle

Lower Handle

Tool Caddy

The only thing you will need to assemble your cleaner is

a Phillips head screwdriver.

1. Slide upper handle onto lower handle.

2. Feed bundled power cord through tool caddy fromcaddys flat side.

3. Align upper handle holes and tool caddy holes.4. Place hex nut into back of tool caddy and hold in

place. Insert bolt from front to back turning into the

hex nut until snug. Do not over tighten. Repeat for

the second bolt and hex nut.5. Insert 2 screws into lower 2 holes. Turn until snug.6. Snap tools into storage on the tool caddy.

7. Wrap power cord and flex hose as shown infigure 7.

PowerSteamer assembly is now complete.

WARNING:Do not plug in yourcleaner until you havecompletely assembled it perthe following instructionsand are familiar with allinstructions and operatingprocedures.

How to Use this Guide

Assembly

6 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

1. 2.

3. 4.

5. 6.

7.

ug120-4074_1697_908.indd 6 10/14/08 12:57:11 PM


7/20

Your BISSELL PowerSteamer is a home cleaningsystem that uses a combination of hot tap water,

BISSELL advanced cleaning formula and suctionto safely clean carpets and upholstery.

DirtLifter PowerBrush

The DirtLifter PowerBrush is designed toenhance cleaning performance. The bristlepattern safely lifts out the deep down dirt whilegently grooming carpet fibers. The floatingsuspension self-adjusts to all carpet heights.When the power is ON ( I ) and the machine is

in the upright position, your carpet is protectedbecause the brushes are lifted up off the carpet.

SmartMix

The SmartMix feature automatically mixes hottap water with the BISSELL advanced cleaningformula. Simply choose one of the 3 settings(high traffic, normal, or water only) and thePowerSteamer will adjust the right amount ofcleaning solution to mix with the water to fityour cleaning need.

Having a separate solution tank from thewater tank allows no waste of formula.Because the water and solution are storedseparately, they are not mixed until you areready to clean. When your cleaning job isfinished, the formula can be stored ready touse in your machine for the next time!

2-in-1 water tank

Our 2-in-1 water tank system is designed with aheavy duty bladder inside for clean water. As youclean, the clean water in the bladder will emptyand mix with the cleaning formula. Dirty waterpulled out of your carpets will collect around theoutside of the bladder so that clean and dirtywater are always kept separate. This allows theuser to maximize tank space, yet only carry onetank to and from the sink for emptying and filling.

Special Features of Your BISSELL PowerSteamer

SmartMix bottle

7w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

ug120-4074_1697_908.indd 7 10/14/08 12:57:11 PM


8/20


9/20

Fill the 2-in-1 water tank

1. Release the handle and lay the machine handleback to access the Tank.

2. Remove the tank from the base of the machine bylifting the tank carry handle.

3. Carry like a bucket to the sink. Rotate the handleforward to unlatch the lid. Lift off and set the lid aside.

4. Fill up the bladder with clean hot tap water.*Do not boil or microwave water as it can

destroy the bladder.

5. Replace the top of the tank by matching the lid

and tank edges. Handle must be in the forwardposition in order to replace lid. Rotate the handle

to the carrying position to latch the lid.

Note: Remember to secure the lid and test to

make sure it is secure before picking up the tank.

6. Place tank into machine base, seating firmly in place.Rotate tank handle back into latched position. Bring

machine handle back into upright position.

Fill the SmartMix/formula tank

1. Lift the formula tank up and out of the machine base.2a. Fill the formula tankby first unscrewing the cap

and insert. Always use genuine BISSELL formulas

to maximize cleaning and for the safety of yourmachine. Fill formula up to the line and replace the

cap and insert. Place formula tank into the slot in the

back of the machine for a snug fit.

2b. If using the BISSELL 3X Concentrated Fiber CleansingFormula: Add 3 capfuls of 3X Concentrated Fiber

Cleansing formula to the formula tank, and then fill

with warm water to the line.

Note: If bottle leaks, check for proper positioning

of red gromment and straw insert.

Operation

9w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

WARNING:To Reduce the Risk of Fire andElectric Shock due to internalcomponent damage, use onlyBISSELL cleaning fluids intendedfor use with the deep cleaner.

1. 2.

3. 4.

5. 6.

1. 2.

ug120-4074_1697_908.indd 9 10/14/08 12:57:14 PM


10/20

Choose the SmartMix setting

Simply choose one of the 3 settings

HighTraffic Normal WaterRinseand the PowerSteamer will adjust the rightamount of cleaning solution to mix with theheated water to fit your cleaning need.

NOTE: When your cleaning job is finished,the formula can be stored ready to use inyour machine for the next time!

Set ReadyTools dial

Set ready tools dial to the floor cleaning setting.

Power switch

1. Plug into a proper outlet and turn the powerswitch to the ON ( I ) position. The switch is

found on the back of the handle.

Cleaning strokes

1. While pressing the trigger, make one slow forwardwet pass and another one back. Let the formula

and DirtLifter PowerBrush do the work for you.

Caution: Do not overwet. Take care not to run

over loose objects or edges of area rugs. Stalling

brush may result in premature belt failure.

2. Release the trigger and make one slow forward andbackward pass over the same area to remove any

residual dirty water, and aid in drying. Repeat cleaning

passes until solution being pulled up appears clean.

Continue passes without pressing the trigger until you

cant see any more water being pulled up.NOTE: Both the SmartMix tank and theclean water tank must have liquid in themin order for the machine to spray. If one

tank is empty the machine will not applycleaning solution or water.

3. After cleaning, you may want to turn the SmartMixdial to rinse to give your carpeting a final water only

rinse. This will ensure thorough removal of embedded

dirt loosened by the deep cleaning formula. BISSELL

deep cleaning formulas contain an anti-resoiling

agent that helps your carpets repel dirt and keeps

them looking good longer.

When filling bottle orstoring unit, set

dial to:

WATERRINSE

HIGH

TRAFFIC

NORM

AL

ReadyTools Dial

SmartMix Dial

Tip:Deep cleaning stairs and high traffic areas ona regular basis can prolong carpet life.

WARNING:To reduce the risk of fire,

electric shock or injury,unplug from the outletbefore servicing.

10 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operation

ug120-4074_1697_908.indd 10 10/14/08 12:57:15 PM


11/20


12/20

Machine storage

Once your cleaning is complete, make sure the2-in-1 water tank is emptied and rinsed out. Putthe unit away in a closet or basement for the nextuse. The SmartMix tank can remain filled andready to go (store with machine set to water onlysetting), or it can simply be emptied back into theformula bottle if that is more convenient.

Note: Store cleaner in a protected, dry area.Since this product uses water, it must not bestored where there is a danger of freezing.Freezing will damage internal components

and void the warranty.

Machine Care

For best results, a few simple steps can assureyour machine is well maintained after yourcleaning is complete.

1. Turn power switch OFF ( 0 ). Unplug the machineand wrap the power cord.

2. After emptying the 2-in-1 water tank, rinse it outat a faucet with running hot tap water, taking care

to clean underneath the heavy duty bladder, and

all around it. Clean out lint trap.

3. Replace the 2-in-1 water tank on the machine.4. Clean out the flow indicator filter each time it is used

to ensure best cleaning performance. Unscrew the

flow indicator cap, lift out the red rotor and white

filter. Rinse all three parts with water. Replace the

filter and rotor. Replace the flow indicator cap. Turn

until snug, do not over-tighten.

5. Any loose hair or debris can be pulled from thebrush roll if desired and thrown away.

6. Wipe the machines exterior with a soft cloth.7. After carpet is dry, vacuum again to remove

hair and fuzz.

Maintenance and care

Flow Indicator

12 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

WARNING:To reduce the risk of fire,electric shock or injury,unplug from the outletbefore servicing.

3.

ug120-4074_1697_908.indd 12 10/14/08 12:57:16 PM


13/20

Your PowerSteamer machine comes equippedwith a hose and at least one attachment for

cleaning stairs, upholstery, and more.1. Important! If using to clean Upholstery, check

Upholstery Tags.

A. Check manufacturers tag before cleaning.

W or WS on the tag means you can

use your PowerSteamer. If the tag is coded

with an X or an S (with a diagonal stripe

through it), or says Dry Clean Only, do not

proceed with any deep cleaning machine. Do

not use on velvet or silk. If manufacturers

tag is missing or not coded, check with yourfurniture dealer.

B. Check for colorfastness in an inconspicuous place.

C. If possible, check upholstery stuffing. Colored

stuffing may bleed through fabric when wet.

D. Plan activities to allow upholstery time to dry.

E. Vacuum thoroughly to pick up loose debris and

pet hair. Use a vacuum with a brush attachment

and a crevice tool to clean in fabric folds.

2. Follow the instructions on page 9 for filling the

2-in-1 water tank and the formula tank.3. Set ready tools dial to the tools or pretreat setting. Thiswill allow spray and divert the suction to the hose.

4. Set SmartMix dial to normal.5. Attach the cleaning tool to the end of the hose.6. Plug in and turn on the power switch.7. Clean by pressing the trigger to spray solution

onto the area to be cleaned. Slowly move the tool

back and forth over the soiled surface. Release

the trigger to suction soiled water. Continue to

clean in the area, working in small sections, until

no more dirt can be removed. Rinse (optional) and

suction as needed. Caution: Do no overwet.

8. When cleaning is complete, remove and rinsetools in clean, running water.

9. Coil hose around the tool caddy.10. Empty 2-in-1 water tank and rinse out, following

the instructions on page 11.

11. Return ready tools dial to floor cleaning.

Maintenance and care

Manufacturers tag

WARNING:To reduce the risk ofinjury, be extra carefulwhen cleaning stairs.Make sure machine issecure and level.

13w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Tip:

Deep cleaning carpeting andupholstery with BISSELL

Multi-Allergen RemovalFormula with Scotchgardprotector regularly canreduce dust and allergensin your home.

5.

ug120-4074_1697_908.indd 13 10/14/08 12:57:17 PM


14/20

Cleaning fluid section

Keep plenty of genuine BISSELL Fiber CleansingFormula on hand so you can clean and protectwhenever it fits your schedule. Always usegenuine BISSELL deep cleaning formulas.

Stain removal

Do not delay! Attending to an accident soon afterit occurs ensures the chances for full removal.Leaving it for an extended period of time maycause it to set and become permanent.

1. Blot up liquids with an absorbent cloth or papertowels. White materials are recommended because

certain dyes may bleed and make the stain worse.

2. Gently scrape up any semi-solids with a spoon orspatula. Do not use a knife or other utensil with

sharp edges because it could damage the carpet

or upholstery.3. If the area has dried, remove the remaining

semi-solids and residue with a sweeper or vacuum.

4. Be sure to test any spot removal formulas in aninconspicuous area first. This is important as some

dyes and materials could be damaged or discolored

by cleaning solvents. If such a change should occur,

try a different solution or call a professional.

5. If cleaning on Berber carpeting, gently run yourmachine over a hidden area. If no fuzzing occurs,

continue cleaning in soiled area.6. Using the BISSELL Tough Stain PreCleaner, sprayevenly over soiled area. Do not overwet. Wait 3-5

minutes. Gently work the solution by blotting area

with a clean, damp, color safe cloth.

7. Clean using either the floor cleaning, or tools orpretreat setting on the ready tools dial.

Cleaning Fluid SectionWARNING:To reduce the risk of fireand electric shock due tointernal component damage,use only BISSELL cleaningfluids intended for use withthe deep cleaner. Non-BISSELL cleaning solutionsmay harm the machine andvoid the warranty.

14 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

48 oz. BISSELLFiber CleansingFormulawithScotchgard

Protector#0710

48 oz. BISSELLMulti- AllergenRemovalFormulawithScotchgard

Protector

#0720

48 oz. BISSELLPet Odor and SoilRemovalFormulawith Scotchgard

Protector#0730

48 oz. BISSELLNatural OrangeExtract Formula

with Scotchgard

Protector#0740

32 oz.BISSELLHard FloorSolutions

Formula#0484

22 oz.BISSELLTough StainPreCleaner

#0400

48 oz. BISSELLLavender EssenceFormulawithScotchgard

Protector#0750

43 oz. BISSELL3X ConcentratedFiber CleansingFormula withScotchgardProtector

#0716

ug120-4074_1697_908.indd 14 10/14/08 12:57:19 PM


15/20

Hard floor cleaning

Your PowerSteamer model may have come witha hard floor attachment and Hard Floor SolutionsFormula. If not, these products are available forpurchase by contacting the BISSELL ConsumerServices department by phone or on the website.The hard floor tool provides effective cleaning forlinoleum, vinyl, and tile floors.Caution: Do not use on unsealed hardwood floors.

1. Vacuum or Sweep thoroughly to pick up any loosedebris and pet hair.

2. Move any furniture, if needed.3. Empty any carpet cleaning formula back into theBISSELL bottle if stored in the formula tank. Fill

formula tank with BISSELL Hard Floor Solutions,

available at many retailers, or contact BISSELL

Consumer Services.

4. Fill the 2-in-1 water tank with hot tap water andset aside.

5. Attach the hard floor tool onto the floor nozzle withthe long tab to the right side of the floor nozzle. First

attach left side (short tab) catching tab over nozzle

edge. Gently bend long tab (right side) outward to

easily snap over edge of clear nozzle on left.

6. Set the ready tools dial to floor cleaning.7. Set the SmartMix dial to normal clean.8. Plug into an outlet and turn the power switch

ON ( I ).

9. Slowly move the machine forward and back overbare floor surface one time while pressing trigger.

Caution: Do not overwet.

10. Repeat the motion without pressing the trigger.

This allows the hard floor tool to squeegee andsuction up the dirty water.

11. Allow approximately 30 minutes for floors to dry.12. Remove hard floor tool and rinse and dry

before storing.

13. If any formula remains in the formula tank, pourit back into the Hard Floor Solutions bottle for use

the next time.

14. Rinse out the formula tank.

Hard Floor Cleaning

15w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Hard FloorCleaning Tool

Bottom Front Edgeof Floor Nozzle

Snap Together

ug120-4074_1697_908.indd 15 10/14/08 12:57:19 PM


16/20

Reduced spray or no spray.

Possible Cause Remedies

1. Bladder may be empty. 1. Refill bladder with hot tap water.

2. SmartMix tank may be empty. 2. Fill with BISSELL Fiber CleansingFormula for cleaning.

3. The filter may be clogged. 3. Clean out flow indicator filter,page 12.

4. Tanks may not be seated properly. 4. Turn power OFF (O); remove &reseat tanks.

5. Pump may have lost prime. 5. Turn power OFF (O); after 1minute turn ON and pressTrigger.

6. The pump belt may be broken. 6. Turn the machine OFF (O) and unplugfrom the outlet. To check if a pumpbelt has broken, you will need a flathead screwdriver. Insert the bladeend into the lower slot of the belt

access door to release the lowersnap. If necessary, insert the bladeend into the upper slot to release theupper snap. Examine the belt forbreakage. You should be able tosee the pump belt looped around themotor shaft. If it is broken or missing,please refer to Replacement Parts onpage 19 before calling ConsumerServices. Complete installationinstructions will accompany thereplacement belt.

Troubleshooting WARNING:To reduce the risk of fire,electric shock or injury

unplug from outlet beforeservicing.

InsertScrewdriverBlade Here

Lift Here

16 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

ug120-4074_1697_908.indd 16 10/14/08 12:57:20 PM


17/20

Troubleshooting

17w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

DirtLifter PowerBrush does not turn.

Possible Cause Remedies

1. The Brush Belt or Pump Belt 1. Turn the machine OFF (O) and unplugis off or broken. from the outlet. To check if the brush

belt or pump belt has broken, youwill need a flat head screwdriver.Insert the blade end into the lowerslot of the belt access door to releasethe lower snap. If necessary, insertthe blade end into the upper slot torelease the upper snap. Examine thebelt for breakage. If broken, please

refer to Replacement Parts on page 19before calling Consumer Services.Complete installation instructionswill accompany the replacement belt.

Cleaner not picking up solution.

Possible Causes Remedies

1. Ready tools dial may be on the 1. Set ready tools dial to either orwrong setting for the cleaning job. tools or pretreat floor cleaning.

2. Nozzle window may not be 2. Press down firmly on the black

properly attached. oval gasket at the top window tomake sure the two tabs on theback of the nozzle window aresnapped into the mating slots inthe main housing.

3. 2-in-1 water tank lid is not properly installed. 3. Re-install lid; refer to page 9.

4. 2-in-1 water tank is not properly seated. 4. 2-in-1 water tank must be firmlyseated to function; remove andreseat 2-in-1 water tank.

5. Poor tool position. 5. Adjust angle; apply more

(Hand held attachments only). downward pressure.

6. 2-in-1 water tank has picked up 6. Empty 2-in-1 water tank, refer tomaximum dirty water. page 11.

Other Maintenance or Service not included above should be performed by anauthorized service representative.

Thank you for selecting a BISSELL product.If you should happen to need assistance during assembly or operations, call 1-800-237-7691

Please do not return this product to the store

ug120-4074_1697_908.indd 17 10/14/08 12:57:20 PM


18/20

Fr infrin bu rpirs r rplcn prs, r qusins bu yur rrny, cll:

BISSELL Consumer Services

1-800-237-7691mndy - Fridy 8 .. 10 p.. eStSurdy 9 .. 8 p.. eStor ri:BISSELL HOMECARE, INC

PO Box 3606

Grand Rapids MI 49501

ATTN: Consumer Services

Or visit the BISSELL website - www.bissell.comwhn cncing BISSeLL, hv dl nubr f uni vilbl.

Pls rcrd yur mdl Nubr: ___________________

Pls rcrd yur Purchs D: ___________________

NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the eventof a warranty claim. See "About Your Warranty" on page 20 for details.


18 w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Please register your new BISSELL product atwww.bissell.com/productregistration

ug120-4074_1697_908.indd 18 10/14/08 12:57:20 PM


19/20

Replacement parts - BISSELL PowerSteamerBelow a list of common replacement parts. While not all of these parts may have comewith your specific machine, all are available to you for purchase, if desired.

Item Part No. Part Name1 210-9201 4 Sll ar tl

2 203-6655 Sprying Crvic tl

3 310-1252 turbBrush

4 214-9131 Hrd Flr tl

5 214-9142 Prtr wnd

6 215-9155 tugh Sin Brush

7 015-9043 tnk assbly Cpl (Includs lid ssbly)

8 015-4439 tnk Lid assbly

9 015-9041 tnk B10 210-1785 Srmixtnk (Includs Cp)

11 210-1795 Srmix Cp assbly

12 555-6503 Fl Indicr Cp assbly

13 214-9871 Flr Nzzl wind nd Gsk

14 210-4052 wind Gsk

15 215-0628 Rplcn Pup Bl (wih Insrucins)

16 015-0621 Rplcn Bl Brush (wih Insrucins)

17 213-3501 Lin Scrn

18 710a Fibr Clnsing Frul 48 z19 720a muli-allrgn Rvl Frul 48 z

20 730a P odr nd Sil Rvl Frul 48 z

21 0716 3x Cncnrd Fibr Clnsing Frul ih

Scchgrd Prcr 43 z.

22 0484 Hrd Flr Sluins 32 z

23 222-0400 tugh Sin PrClnr 22 z

1 2 3 4 5 6 7

8 9 10 12 13 15 16

17 18 19 20 22 23

19w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

11

14

21

Earn Rewards Points!To qualify you for discounts, rebates, and other BISSELL perks.

Visit www.bissell.com/rewards to learn more.

ug120-4074_1697_908.indd 19 10/14/08 12:57:24 PM


20/20

Warranty - BISSELL PowerSteamer

this rrny givs yu spcific lgl righs, nd yu y ls hv hr righs hich y vry fr s s. If yu nd ddiinl insrucin rgrding his rrny r hv qusins rgrding h i y

cvr, pls cnc BISSeLL Cnsur Srvics by e-il, lphn, r rgulr il s dscribd bl.

Limited One Year Warranty Subjc h *EXCEPTIONS AND EXCLUSIONS idnifid bl, upn rcip f h prduc BISSeLL

Hcr, Inc. ill rpir r rplc (ih n r rnufcurd cpnns r prducs), BISSeLLspin, fr f chrg fr h d f purchs by h riginl purchsr, fr n yr ny dfciv rlfuncining pr.

S infrin bl n "If yur BISSeLL prduc shuld rquir srvic".

this rrny pplis prduc usd fr prsnl, nd n crcil r rnl srvic. this rrny ds npply fns r ruin innnc cpnns such s filrs, bls, r brushs. Dg r lfuncin cusd

by nglignc, bus, nglc, unuhrizd rpir, r ny hr us n in ccrdnc ih h Usr's Guid is ncvrd.

If your BISSELL product should require service:Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.

If you need information about repairs or replacement parts, or if you have questions about your warranty,contact BISSELL Consumer Services.

Website or E-mail:

www.bissell.com

Use the Customer Services tab.

Or Call:


1-800-237-7691Monday - Friday 8 a.m. - 10 p.m. ET

Saturday 9 a.m. - 8 p.m. ET

Or write:

BISSELL Homecare Inc.

PO Box 3606

Grand Rapids MI 49501

ATTN: Consumer ServicesBISSeLL HomeCaRe, INC. IS Not LIaBLe FoR INCIDeNtaL oR

CoNSeQUeNtIaL DamaGeS oF aNY NatURe aSSoCIateD wItH tHe

USe oF tHIS PRoDUCt. BISSeLLS LIaBILItY wILL Not eXCeeD tHe

PURCHaSe PRICe oF tHe PRoDUCt.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the abovelimitation or exclusion may not apply to you.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITEDWARRANTYtHIS waRRaNtY IS eXCLUSIVe aND IN LIeU oF aNY otHeR waRRaNtIeS eItHeR

oRaL oR wRItteN. aNY ImPLIeD waRRaNtIeS wHICH maY aRISe BY oPeRatIoNoF Law, INCLUDING tHe ImPLIeD waRRaNtIeS oF meRCHaNtaBILItY aNDFItNeSS FoR a PaRtICULaR PURPoSe, aRe LImIteD to tHe oNe YeaR DURatIoNFRom tHe Date oF PURCHaSe aS DeSCRIBeD aBoVe.

2008 BISSeLL Hcr, Inc

Grnd Rpids, michign

all righs rsrvd.

Pr Nubr 120-4074Rv 09/08

Visi ur bsi :

.bissll.c

Scchgrd is rdrk f 3m

b i l l 8 0 0 2 3 6 9 1

bissell 1698 carpet cleaner owner's manual

Documents