AdvAnced Lighting controL. Just two wires to instALL. Power And Lighting mAnAgement over the sAme two wires.

Bits2Power, lighting the easy way

Bits2Power, lighting control just got easy!

the Bits2Power lighting control system has been developed to create a seamless

integration with lighting and building management systems. smartly manage

lighting sources to save energy.

Bits2Power is an advanced lighting control system based on 2 wires (power and

communication). this makes it probably the easiest lighting control system to

install today.

Bits2Power conveniently communicates with most of the lighting management

protocols. ideal for system integrators, installers and fixture manufacturers.

Main Features• System based on 2 wires only

• Ability to communicate with many lighting

management protocols

• High efficiency & low stand by power

• Safe 48V output voltage

• LED dimmable to 0% smoothly

• Addressable drivers

Main Benefits• Easy installation, less wiring & installation cost

• Easy to tailor upon requirement

• Lower energy cost

• Bridge larger distances

• Safe installation & efficient lighting control

• Efficient lighting control per individual address

Easy to tailor and installBits2Power is designed in such a way that it can be tailored to many lighting protocols. This gives a lot of design

freedom when choosing luminaires. Installing a protocol key (if required) and connecting 2 wires is all you need to do.

Energy and cost savingsBits2Power components have a very high power efficiency of up to 95%. In standby mode they hardly consume

energy and are Energy Star compliant. By using 2 wires only Bits2Power systems need up to 50% less copper

wiring than conventional lighting systems. Resulting into big savings on wiring and substantial reduction of

installation time.

Bridge larger distancesBits2Power systems operate on 48V. This means that larger distances can be bridged compared to the conventional

12 & 24V systems. Bits2Power systems can be up to 250m long per connection.

Efficient lighting controlBits2Power systems can combine and control different lighting sources (LED, HALO, CFL). Every individual fixture

can be made addressable. Smoothly dim light to 0%* wherever and whenever it is needed.

*not with cFL

The heart of each Bits2Power system is the so called

Power Data Controller unit. A combined power and

communication source. Each Power Data Controller

unit can be installed with a lighting management

protocol key for e.g. DMX, Dali etc. Bits2Power Power

Data Controllers can handle up to 96 addresses.

Multiple Power Data Controllers can be connected

in parallel and with each other to create even more

addresses.

Power Data Controller

LED Drivers

Protocol Keys

Touch Technology Keypad

The Bits2Power system can be extended with a Touch

Technology user keypad. While having a multitude of

protection features and IP20 rating, it can safely fit

standard wall sockets. Front labels are available with

own designs. The Touch technology Keypad is available

in up to 100 different designs.

All Bits2Power components are RoHS compliant, CE certified and come with a 5 years warranty.

Each Bits2Power system can be tailored with the

protocol that is required. Keys that are or can be made

available are DMX/RDM, DALI, KNX, 0-10 volt, ARTNET,

I-light, Digidim, Lutron, Bits2Power (daisy chain).

Bits2Power LED drivers are available with up to 4

channels. Each driver has a 16 position group address

switch. Drivers are available with an output current of

350, 500, 700 and 1050mA.

DC output voltage rangeRated currents Maximum powerNumber of LEDsDC input voltage rangeMinimal power efficiencyStandby powerMaximum operating temperatureIP ratingWeightDimension (l x w x h) in mm

DC input voltage rangeInput power Maximum operating temperatureIP ratingWeightDimension (l x w x h) in mm

DC output voltage rangeDC output current Maximum operating temperatureIP ratingWeightDimension (l x w x h) in mm

DC input & output voltage rangeDC input & output current (max.)Maximum operating temperatureIP ratingWeightDimension (l x w x h) in mm

DC output voltage Rated current Rated powerAC input voltage rangePower efficiencyStandby powerMaximum operating temperatureIP ratingWeightDimension (l x w x h) in mm

Charachteristics

Charachteristics

Charachteristics

Charachteristics

Charachteristics

Values

Values

Values

Values

Values

3..Uin -4V350/500/700/1050mA16W/22W/31W/46W1..1224-48V (= Uin)92%< 1mW-20˚ / +50˚IP670,17 kg156 x 38 x 25 mm

24..48V1W-20˚ / +50˚IP200.087 kg91,8 x 91,8 x 26 mm

-22.5..22.5V2mA-5˚ / +40˚IP200,09 kg115 x 76 x 38 mm

-7..12V2mA-5˚ / +40˚IP200,09 kg115 x 79,9 x 38 mm

48V12.5A600W85-264VUp to 95%0.5W-5˚ / +40˚

IP203 kg350x137x93mm

Specifications LED drivers

Specifications User Interface

Specifications DALI protocol key

Specifications DMX/RDM protocol

Specifications Power Data Controllers

Basic System Set Up

Implementation

Need more informationabout Bits2Power ?

www.bits2power.com

Rena Electronics BVDe Ambachten 124881 XZ ZundertThe Netherlands

T +31 (0)76 - 599 599 5Mail to info@bits2power.com

is powERED By

LED drivers

Power Data Controller

User Interface