blanket insulation bkt board insulation (bd) lyld . …product code: bkt arabian fiberglass...

STANDARD AVAILABLE PRODUCTS

Nominal Manufacturing Specifications.Check for availability of other dimensions and densities.

NOMINAL THERMAL CONDUCTIVITY

W/m.°C-Btu.in./ft2.hr°F (ASTM C 518) (BS 874)“K” or “ ” value at mean temperatures

Board Insulation

Technical Data SheetProduct Code: BD

DESCRIPTION

Board Insulation is composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non water soluble and fire-retardant thermosetting and heat resistant resin, and formed into semi-rigid rectangular boards or slabs. It is free from coarse fibers and shot due to its mineral composition.

FACING

Board Insulation is available unfaced or with a factory applied Kraft, Aluminum Foil or Aluminum Foil Glass Reinforced Kraft Paper (FRK) vapor barriers or other specific substract laminated on one side.

APPLICATION

Board Insulation is a semi-rigid and rigid glass fiber board intended for use in commercial, institutional, industrial and residential construction as thermal and acoustical insulation for exterior walls, interior walls and partitions, cavity wall construction, floor, precast structures and prefabricated houses. The semi-rigid boards with densities from 24 to 48 kg/m3,1.5 - 3.0 lb/ft3 are flexible insulation boards for application over irregularly shaped surfaces where board-like properties are desired. The rigid boards with densities from 56 to 120 kg/m3, 3.5 - 7.5 lb/ft3 are even more rigid for strength, abuse resistance and a flat appearance.

Member ofAffiliate of

* Standard Products and Sizes

ProductTypeBD

Density Thickness Width Length

kg/m3 lb/ft3 mm inch m ft m ft

240 24 1.5253850

11 ½2

1.2 4 1 3

320 32 2.0253850

11 ½2

1.2 4 1 3

400 40 2.5253850

11 ½2

1.2 4 1 3

480* 48 3.0253850

11 ½2

1.2 4 1 3

560 56 3.5253850

11 ½2

1.2 4 1 3

640* 64 4.0253850

11 ½2

1.2 4 1 3

720 72 4.5253850

11 ½2

1.2 4 1 3

800 80 5.0253850

11 ½2

1.2 4 1 3

960* 96 6.0253850

11 ½2

1.2 4 1 3

1120 112 7.0253850

11 ½2

1.2 4 1 3

0°C 32°F 10°C 50°F 24°C 75°F 50°C 122°F 75°C 167°F 100°C 212°F

0.031 0.21 0.032 0.22 0.035 0.23 0.039 0.27 0.043 0.30 0.047 0.33

0.030 0.20 0.031 0.22 0.033 0.23 0.037 0.25 0.040 0.27 0.044 0.30

0.029 0.20 0.030 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

0.029 0.20 0.030 0.21 0.031 0.22 0.035 0.24 0.037 0.26 0.041 0.29

0.030 0.21 0.031 0.21 0.033 0.23 0.036 0.25 0.038 0.27 0.042 0.30

0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.038 0.27 0.043 0.30

0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.

Thickness Width Length Densities

mm inch mm inch m ft kg/m3 lb/ft3

25 1 400 16 10

to

36

33

to

120

10-12 0.625-0.75

38 1 ½ 410 16

50 2 600 24

64 2 ½ 610 24

75 3 1200 48

89 3 ½ 1220 48

Depending

on thickness100 4

150 6

Thickness Thermal conductivity(K)

Thermal resistance(R)

mm inch W/m.°C Btu.in/hr.ft2 °F m2.°C/W hr.ft2.°F/Btu

25 1 0.040 0.28 0.63 4

38 1 ½ 0.040 0.28 0.95 5

50 2 0.040 0.28 1.25 7

64 2 ½ 0.040 0.28 1.60 9

75 3 0.040 0.28 1.88 11

89 3 ½ 0.040 0.28 2.23 13

100 4 0.040 0.28 2.50 14

150 6 0.040 0.28 3.75 21

DESCRIPTION

Blanket Insulation is a highly efficient, light weight, strong, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin.

It is free from coarse fiber and shot due to its mineral composition.

FACING

Blanket Insulation is available unfaced, or laminated with factory-applied Kraft Paper, Vinyl or Aluminum Foil Glass Reinforced Kraft (FRK) or other specific vapor barriers to prevent condensation.

STANDARD NOMINAL DIMENSIONS

Check for availability of other dimensions and densities.


(at 24°C or 75°F mean temperature) (ASTM C 518) (BS 874)

APPLICATION

Blanket Insulation is intended for use in commercial, institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for the interior, exterior and cavity walls applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems.

DENSITY

10 kg/m3 (0.625 pcf)



Blanket Insulation

Technical Data SheetProduct Code: BKT




25 1 400 16 10

to

36

33

to

120

10-12 0.625-0.75

38 1 ½ 410 16

50 2 600 24

64 2 ½ 610 24

75 3 1200 48

89 3 ½ 1220 48

Depending

on thickness100 4

150 6




25 1 0.040 0.28 0.63 4

38 1 ½ 0.040 0.28 0.95 5

50 2 0.040 0.28 1.25 7

64 2 ½ 0.040 0.28 1.60 9

75 3 0.040 0.28 1.88 11

89 3 ½ 0.040 0.28 2.23 13

100 4 0.040 0.28 2.50 14

150 6 0.040 0.28 3.75 21

DESCRIPTION



FACING






APPLICATION


DENSITY

10 kg/m3 (0.625 pcf)



Blanket Insulation


Board Insulation (BD)

Board Insulation is composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non water soluble and fire-retardant thermosetting and heat resistant resin, and formed into semi-rigid rectangular boards or slabs. It is free from coarse fibers and shot due to its mineral composition.

Board Insulation is available unfaced or with one side factory-applied KRAFT, Aluminum Foil Reinforced Kraft Paper Laminate (FRK), the White All Service Jacket (ASJ) and the Aluminum Foil Woven Fiberglass Jacket (AWF) to give a pleasing appearance vapor barrier. The facings have UL fire resistant ratings.




25 1 400 16 10

to

36

33

to

120

10-12 0.625-0.75

38 1 ½ 410 16

50 2 600 24

64 2 ½ 610 24

75 3 1200 48

89 3 ½ 1220 48

Depending

on thickness100 4

150 6




25 1 0.040 0.28 0.63 4

38 1 ½ 0.040 0.28 0.95 5

50 2 0.040 0.28 1.25 7

64 2 ½ 0.040 0.28 1.60 9

75 3 0.040 0.28 1.88 11

89 3 ½ 0.040 0.28 2.23 13

100 4 0.040 0.28 2.50 14

150 6 0.040 0.28 3.75 21

DESCRIPTION



FACING






APPLICATION


DENSITY

10 kg/m3 (0.625 pcf)



Blanket Insulation


Board Insulation is a semi-rigid and rigid glass fiber board intended for use in commercial, institutional, industrial and residential construction as thermal and acoustical insulation for interior walls and partitions, cavity wall construction, floor, precast structures and prefabricated houses and exterior of duct work and mechanical, air handling equipment, vessels and tanks where abuse resistance is required.The semi-rigid boards with densities from 24 to 48 kg/m3 (1.5 - 3.0 lb/ft3) are flexible insulation boards for application over irregularly shaped surfaces where board-like properties are desired. The rigid boards with densities from 56 to 96 kg/m3, (3.5 – 6.0 lb/ft3) are even more rigid for strength, abuse resistance and a flat appearance.

Nominal Manufacturing Specifications.Check for availability of other dimensions and densities

ProductTypeBD

Density Thickness Width Length

kg/m3 lb/ft3 mm inch m ft m ft

240 24 1.5 25 1 1.2 4 0.6 238 1 ½ 1.0 3.350 2 2.4 8

320 32 2.0 25 1 1.2 4 0.6 238 1 ½ 1.0 3.350 2 2.4 8

400 40 2.5 25 1 1.2 4 0.6 238 1 ½ 1.0 3.350 2 2.4 8

480 48 3.0 25 1 1.2 4 0.6 238 1 ½ 1.0 3.350 2 2.4 8

560 56 3.5 25 1 1.2 4 0.6 238 1 ½ 1.0 3.350 2 2.4 8

640 64 4.0 25 1 1.2 4 0.6 238 1 ½ 1.0 3.350 2 2.4 8

720 72 4.5 25 1 1.2 4 0.6 238 1 ½ 1.0 3.350 2 2.4 8

800 80 5.0 25 1 1.2 4 0.6 238 1 ½ 1.0 3.350 2 2.4 8

960 96 6.0 25 1 1.2 4 0.6 238 1 ½ 1.0 3.350 2 2.4 8

STANDARD AVAILABLE PRODUCTS

GulfInsulationGroup

ArabianFiberglassInsulationCompanyLtd.

J.V.ofGulfInsulationGroup(AZamilIndustrialSubsidiary)&OwensCorningCorp.

الشركة العربية للمواد العازله من الفايربجالس احملدودة

شراكة اسرتاتيجية بني جمموعة العزل اخلليجية )إحدى قطاعات الزامل للصناعة( وشركة أوينز كورننج

Nominal Thermal Conductivity

W/m·°K or Btu·in/hr·ft2·°F (ASTM C 518)“K” or “λ” value at mean temperatures

Type0°C

32°F

10°C

50°F

24°C

75°F

50°C

122°F

75°C

167°F

100°C

212°F

240 0.031 0.21 0.032 0.22 0.035 0.23 0.039 0.27 0.043 0.30 0.047 0.33

320 0.030 0.20 0.031 0.22 0.033 0.23 0.037 0.25 0.040 0.27 0.044 0.30

400 0.029 0.20 0.030 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

480 0.029 0.20 0.030 0.21 0.031 0.22 0.035 0.24 0.037 0.26 0.041 0.29

560 0.030 0.21 0.031 0.21 0.033 0.23 0.036 0.25 0.038 0.27 0.042 0.30

640 0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.038 0.27 0.043 0.30

720 0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

800 0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

960 0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

Thermal Resistance “R” Value (ASTM C 167)

“R” is a measure of the resistance to heat flow of a material of any given thickness.(“R” = m2·°K/W or hr·ft2·°F/Btu)

R = T where “T” = Thickness K and “K” or “λ” = Thermal Conductivity

The Following table shows the “R” values of AFICO’s standard products and sizes at 24°C (75°F) mean temperature..

Working Temperature Limitations (ASTM C 411)

-51°C to +450°C At Excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.

Mold Growth (ASTM D 2020, UL 181)

Does not breed or sustain mold, fungus, bacteria or rodents

Corrosiveness (ASTM C 665)

Chemically inert. Will not cause or accelerate corrosion of steel, stainless steel, copper or aluminum, due to its particular inorganic and mineral composition.

Alkalinity

pH 9

Surface Burning Characteristics

(ASTM E 84, UL 723)

Base glass fiber is non-combustible when tested to ASTM E 84.

FacingFlameSpread

SmokeDeveloped

FuelContributed

unfaced 0 0 0

FRK 25 10 0

ASJ 20 10 0

AWF 10 0 0

Specification Compliance

Board Insulation complies with the property requirements of the following specifications:

DCL : ASTM C 612

CE-EN : 1121-CPD-BA0136

ProductTypeBD

Thickness (T) THERMAL CONNECTIVITY (K-VALUE)

THERMAL RESISTANCE (R-VALUE)

mm inch w/m.°K Btu.in/ft2hr.°F m2.°K/W hr.ft2.°F/Btu

480(48 kg/

m3)

25 1 0.031 0.22 0.758 4.35 (4)

38 1 ½ 0.031 0.22 1.152 6.52 (7)

50 2 0.031 0.22 1.515 8.70 (9)

640(64 kg/

m3)

25 1 0.032 0.22 0.781 4.55 (5)

38 1 ½ 0.032 0.22 1.188 6.82 (7)

50 2 0.032 0.22 1.563 9.09 (9)

960(96 kg/

m3)

25 1 0.032 0.22 0.781 4.55 (5)

38 1 ½ 0.032 0.22 1.188 6.82 (7)

50 2 0.032 0.22 1.563 9.09 (9)

Thermal Conductance “C” Value (ASTM C 518, ASTM C 177)

“C” It is ability of the product to conduct heat. (“C” = W/m2·°K or Btu/hr·ft2·°F)

C = 1 where “T” = Thickness R and “K” or “λ” = Thermal Conductance

Vapor Permeability (ASTM E 96 A)

Aluminum Foil Reinforced Kraft Paper Laminate (FRK) : 0.020 PERMWhite All Service Jacket (ASJ) : 0.020 PERMAluminum Foil Woven Fiberglass Jacket (AWF) : 0.018 PERM

Fire Properties

B.S. 476 PART 4 : Non Combustible B.S. 476 PART 5 : Ignitability B.S. 476 PART 6 : Fire Propagation B.S. 476 PART 7 : Surface Spread of Flame Class ‘O’ fire rating to the building regulations sections E15

Compressive Strength

Type 240 320 400 480 560 640 720 800 960

PSF at 10 % Deformation

12 16 20 25 40 60 100 150 200

PSF at 25 % Deformation

40 60 80 90 150 225 – – –

Puncture Resistance (ASTM D 781)

Aluminum Foil Reinforced Kraft Paper Laminate (FRK) : 25 UnitsWhite All Service Jacket (ASJ) : 25 UnitsAluminum Foil Woven Fiberglass Jacket (AWF) : 10 Units (270 Psi)

Thermal Transmittance (U Value)

Thermal transmittance is the rate of heat flow through unit area of a wall system when unit temperature difference exists between air on each side of the structure. The U value is the reciprocal of the sum of the resistances of the component parts of the structure plus the resistance of the sur-faces and any cavities within the structure.

“U” Value of typical Cavity Wall Construction

Performance & Physical Characteristics

Quiet LinerTechnical Data SheetProduct Code: AQL

Surface Burning Characteristics(UL 723, ASTM E 84, ASTM E 136)

Base glass fiber is non-combustible when tested to ASTM E84.

Alkalinity

pH 9

Thermal Resistance “R” Value (Excluding Facing)(ASTM C 167)

“R” is a measure of the resistance to heat flow of a material of any given thickness. (“R” = m2. °C/W or hr. ft2. °F/Btu.)

R = where “T” = thickness and “K” or “ ” = thermal conductivity


Operating up to °260C (°500F) for the WGF faced product. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with hot surface. This in no way impairs the performance of the insulation.


Does not breed or sustain mold, fungus, bacteria or rodents.



Moisture Absorption (ASTM D07- B, ASTM C 553)

In conditions of %95 relative humidity at °49C for 96 hours, moisture absorption is less than %0.2 by volume, when tested in accordance with ASTM C 533. fiberglass products do not absorb moisture from the ambient air nor water by capillary attraction, only water under pressure can enter the insulation products but that will quickly dry out owing to the material’s open cell structure.


Quiet Liner Insulation complies with the property requirements of the following specifications:

• ASTM C 1071: For Acoustical Performance• NFPA 90 A: For Fire Resistance

• DCL ASTM - C 533 - C 547 - C 612 - C 665• CE-EN 13162

Friction Loss

According to TIMA AHS152-T Pressure loss, in W.G., Fiberglass Quiet Liner.

This chart is to be used in place of the standard friction loss chart published in the ASHRAE Handbook of fundamentals. For conversion of round equivalents to rectangular sizes, use Table C2- “Circular Equivalents of Rectangular Ducts for Equal Friction and Capacity” from the same reference. Tests conducted in accordance with TIMA AHS 152T.

Facing FlameSpread

Smoke Developed

FuelContributed

WGF 25 50 0

T

K

10090 80 70

60 56 5248

44

40

36

32

28

24

20

18

16

14

12

10

9

8

7

6

5

4

DIA

6000

5500

50004500

400035003000

2800

2600

2400

2200

2000

1800

1600

140012001000900800700600500400

300FPM

100000

80000

60000

50000

40000

30000

20000

10000

8000

6000

5000

4000

3000

2000

1000

800

600500

400300

200

100

0.01 0.02 0.03 0.04 0.06 0.08 0.1 0.2 0.3 0.4 0.4 0.8

Pressure loss, Inches W .G. per 100 feet of duct

1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0

Flow

Rat

e, C

FM

Equivalent diameter dh (m)

0,10 0,15 0,20 0,30 0,40 0,50 0,60 0,70 1,00 1,50 2,00a(m)

1,50

1,000,900,80

0,70

0,60

0,50

0,40

0,30

0,20

0,15

0,10

b(m)

1,00

0,80

0,60

0,50

0,40

0,30

0,25

0,200,175

0,15

0,125

0,10

a

b

Equivalent diameter dh (m) = mm2 (a x b)

a + b

Performance & Physical Characteristics Performance & Physical Characteristics


Working Temperature Limitations

-51°C to + 450°C. At Excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.

Alkalinity

pH 9





Moisture Absorption (ASTM D-07 B, ASTM C 553)

In conditions of 95% relative humidity at 49°C for 96 hours, moisture absorption is less than 0.2% by volume, when tested in accordance with ASTM C 533. fiberglass products do not absorb moisture from the ambient air nor water by capillary attraction, only water under pressure can enter the insulation products but that will quickly dry out owing to the material’s open cell structure.

Vapor Permeability (ASTM E 96 A)

FRK 0.02 PERM (U.S. Federal Specification HH-B-100 B TYPE I)ASJ 0.02 PERM


FRK 25 Units




Fire Properties

B.S 476 Part 4 – Non-combustibleB.S 476 Part 5 – IgnitabilityB.S 476 Part 6 – Fire PropagationClass “O” fire rating to the building regulations section E15

Thermal Conductance, ‘C’-VALUE (ASTM C 518, ASTM C 177)

C = = W/m2.°C or Btu/hr.ft2.°F.

It is the ability of the product to conduct heat.


Board Insulation complies with the property requirements of the following specifications:•TYPE240,320,400(UNFACED):U.S.FederalSpecification HH-I-558 B, Form A, Class 1: Form B, Type 1, Class 7•TYPE480TO1120(FACED,UNFACED):U.S.FederalSpecification HH-I-558 B, Form A, Classes 1 and 2•ASTMC612,Classes1and2•ASTMC553,TypeIII•DCLASTM-C533-C547-C612-C665•CE-EN13162

Thermal Resistance “R” Value (Excluding Facings)(ASTM C 167)

“R” is a measure of the resistance to heat flow of a material of any given thickness. (“R” = m2.°C/W or hr. ft2.°F/Btu.)


The following table shows the “R” values of ’s standard products and sizes at 24°C (75°F) mean temperature.

* 24oC / 75°F mean temperature


Thermal transmittance is the rate of heat flow through unit area of a wall system when unit temperature difference exists between air on each side of the structure.

The U value is the reciprocal of the sum of the resistances of the component parts of the structure plus the resistance of the surfaces and any cavities within the structure.

“U” Value of typical Cavity Wall Construction

T

K

Facing FlameSpread

Smoke Developed

FuelContributed

FRK 0 0 0

ProductTypeBD

Thickness (T)

THERMALCONNECTIVITY

(K-VALUE)

THERMALRESISTANCE(R-VALUE)

mm inch w/m.°C Btu.in/ft2hr.°F m2.°C/W hr.ft2.°F/Btu

480(48 kg/m3)

253850

11 ½2

0.0310.0310.031

0.220.220.22

0.7581.1521.515

4.35 (4)6.52 (7)8.70 (9)

640(64 kg/m3)

253850

11 ½2

0.0320.0320.032

0.220.220.22

0.7811.1881.563

4.55 (5)6.82 (7)9.09 (9)

960(96 kg/m3)

253850

11 ½2

0.0320.0320.032

0.220.220.22

0.7811.1881.563

4.55 (5)6.82 (7)9.09 (9)

Type 240 320 400 480 560 640 720 800 960 1120

PSF at 10% Deformation

12 16 20 25 40 60 100 150 200 250

PSF at 25% Deformation

40 60 80 90 150 225 - - - -

1

R

Key

Thermal Resistance = T/KRso = T/K of outside surface air filmR1 = T/K of external wallRA = T/K of air space

R2 = T/K of insulationR3 = T/K of internal wallR4 = T/K of internal finishRsi = T/K of inside surface air film

1

“R” (Total)“U” =

1

Rso + R1 + RA + R2 + R3 + R4 + Rsi=

Rso

“R” (Total) = Rso + R1+RA+R2+R3+R4+Rsi

R1 RA R2 R3 R4 Rsi

Board InsulationTechnical Data SheetProduct Code: BD



The U value is the reciprocal of the sum of the resistances of the component of the structure plus the resistance of the surfaces and any cavities within the structure.


-4°C to +260°C. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.

Alkalinity (ASTM C 871)

pH 9







Vapor Permeability (ASTM E96A)

KRAFT 1.00 PERMFRK 0.02 PERM


FRK 25 Units


PCF AT 10% DEFORMATION 5PCF AT 25% DEFORMATION 10



Thermal Resistance “R” Value (Unfaced) (ASTM C 167)



Thermal Conductance, “C”- Value (ASTM C 518, ASTM C 177)





Fire Properties

B.S. 476 PART 4 – Non-combustibleB.S. 476 PART 5 – IgnitabilityB.S. 476 PART 6 – Fire propagationB.S. 476 PART 7 – Surface spread of flameClass ‘O’ fire rating to the building regulations section E15


Blanket Installation complies with the property requirements of the following specifications:•UNFACED - U.S. Federal spec. HH-I-521 E Type I•KRAFT FACED - U.S. Federal Spec. HH-I-521 E Type II, Class C•FRK FACED - U.S. Federal Spec. HH-I-521 F, Type III, Class A, ASTM C 665•DCL ASTM - C 533 - C 547 - C 612 - C 665•CE-EN 13162

Acoustical Performance (ASTM C 423)

Sound Absorption Coeffecients at Frequencies (Hz)

Table 1-1Sound Absorption Coeffecients

Fiberglass Blanket Insulation

1R

Product Type & Thickness

Mounting(1)

Sound Absorption CoefficientsOctave Band Center Frequencies, Hz

125 250 500 1000 2000 4000 NRC

3.5” (R-11), insulation exposed to sound A .34 .85 1.09 .97 .97 1.12 .95

6.0” (R-19), insulation exposed to sound A .64 1.14 1.09 .99 1.00 1.21 1.05

3.5” (R-11), insulation exposed to sound E-405 .80 .98 1.01 1.04 .98 1.15 1.00

6.0” (R-19), insulation exposed to sound E-405 .86 1.03 1.13 1.02 1.04 1.13 1.05

3.5” (R-19) FRK facing exposed to sound A .56 1.11 1.16 .61 .40 .21 .80

6.0” (R-19), FRK facing exposed to sound A .94 1.33 1.02 .71 .56 .39 .90

Facing FlameSpread

Smoke Developed

FuelContributed

FRK 0 0 0

1

Rso + R1 + R2 + R3 + RsiHere U =

Rso = Outside surface resistanceR1 = External sheetingR2 = AFICO insulationR3 = Internal sheeting or lining if anyRsi = Inside surface resistance Rso R1 R2 R3 Rsi

T

K


Blanket InsulationTechnical Data SheetProduct Code: BKT


Arabian Fiberglass Insulation Company Ltd.

Acoustical Performance (ASTM C 777-423)

Reverberation Chamber MethodSound Absorption Coefficients at Frequencies (Hz)

Installation Recommendation for flexible blanket

Quiet Liner Products are available in roll and board types. The desired application length can be easily measured and cut from the full size. Quiet Liner is applied to the interior

Product SoundAbsorption coefficient at one third octave

center frequencies (Hz)

TypeThickness

125 250 500 1000 2000 4000 NRCmm w

AQL 16025 1 0.09 0.24 0.49 0.85 0.83 0.77 0.60

50 2 0.34 0.59 0.93 0.94 0.94 0.98 0.85

AQL 24025 1 0.12 0.32 0.70 0.93 0.95 0.99 0.75

50 2 0.27 0.69 1.01 1.07 1.06 1.05 0.95

AQL 320

15 ½ 0.05 0.13 0.32 0.65 0.79 0.93 0.45

25 1 0.29 0.45 0.77 1.00 0.93 0.96 0.80

50 2 0.37 0.92 1.04 1.14 1.13 1.01 1.05

AQL 480

15 ½ 0.05 0.12 0.29 0.51 0.68 0.80 0.40

25 1 0.22 0.52 0.73 0.98 1.02 1.00 0.80

50 2 0.30 0.85 1.03 1.07 1.06 1.00 1.00

AQL 64025 1 0.06 0.19 0.62 0.83 0.90 0.95 0.65

50 2 0.21 0.75 1.00 1.00 1.00 0.95 0.95

of ducts and plenums with the black surface facing the air stream. Transverse joints are to be neatly butted, with no interruptions or gaps. Longitudinal to be overlapped and compressed.

Quiet Liner should be adhered to sheet metal ducts with %100 coverage of adhesive, and all exposed leading edges and all transverse joints coated with adhesive. (The adhesive shall conform to standard ASC-A7001 C1972- or as approved by the project consultant). The liner should be additionally secured with mechanical fasteners which will compress the product sufficiently to hold it firmly in place.

For velocities to 10 m/s: fasteners should start within 75 mm of the upstream transverse edges of the liner and 75 mm from longitudinal joints, and should be spaced at maximum of 300 mm from the corner break. Elsewhere, they should be a maximum 450 mm on centers except to be placed not more than 150 mm from a longitudinal joint and 300 mm from a corner break.

For velocities from 10 to 20 m/s: fasteners should be placed as above, except to be spaced at a maximum of 150 mm from the corner break. Elsewhere, they should be a maximum of 400 mm on centers except to be placed not more than 150 mm from the longitudinal joint and 300 mm from the corner break. In addition to the edge coating of transverse joints, longitudinal joints should be similarly coated with adhesive. For velocities from 20 to 30 m/s, fasteners should be similarly spaced as for 10 to 20 m/s. In addition, metal nosing should be installed to secure the liner at all upstream transverse edges.

The velocity rated side of liner must face the air flow.

Liner adhered to the conduct with %90 min. area coverage of adhesive.

No. Pins

Liner Interior Width

0 8” dn

2 16 -“9”

3 28 - “17”

4 40 - “29”

5 52 - “41”

6 64 - “53”

7 76 - “65”

8 88 - “77”

9 100 - “89”

When velocity exceeds 4000 FPM use metal nosing on every leading edge. Nosing may be formed on duct or by channel or Zee attach by screws, rivets or welds.

Maximum spacing for fasteners.Actual intervals are approximate.

VelocityDimensions

A B C D

2500 - 0 FPM 3” 12” 4” 18”

6000 - 2501 FPM 3” 6” 4” 16”

Alternatefoldedcorner

All transverseedges to becoated with

adhesiveDuct

section(typically)

4 Ft. or 5 Ft.)

A

D

D

A

B

B

CC

B

C

Lapped and butted corner

AIR FLOW

DETAIL - A


The U value is the reciprocal of the sum of the resistances of the component of the structure plus the resistance of the surfaces and any cavities within the structure.


-4°C to +260°C. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.

Alkalinity (ASTM C 871)

pH 9







Vapor Permeability (ASTM E96A)

KRAFT 1.00 PERMFRK 0.02 PERM


FRK 25 Units


PCF AT 10% DEFORMATION 5PCF AT 25% DEFORMATION 10



Thermal Resistance “R” Value (Unfaced) (ASTM C 167)



Thermal Conductance, “C”- Value (ASTM C 518, ASTM C 177)





Fire Properties

B.S. 476 PART 4 – Non-combustibleB.S. 476 PART 5 – IgnitabilityB.S. 476 PART 6 – Fire propagationB.S. 476 PART 7 – Surface spread of flameClass ‘O’ fire rating to the building regulations section E15


Blanket Installation complies with the property requirements of the following specifications:•UNFACED - U.S. Federal spec. HH-I-521 E Type I•KRAFT FACED - U.S. Federal Spec. HH-I-521 E Type II, Class C•FRK FACED - U.S. Federal Spec. HH-I-521 F, Type III, Class A, ASTM C 665•DCL ASTM - C 533 - C 547 - C 612 - C 665•CE-EN 13162

Acoustical Performance (ASTM C 423)

Sound Absorption Coeffecients at Frequencies (Hz)

Table 1-1Sound Absorption Coeffecients

Fiberglass Blanket Insulation

1R

Product Type & Thickness

Mounting(1)

Sound Absorption CoefficientsOctave Band Center Frequencies, Hz

125 250 500 1000 2000 4000 NRC

3.5” (R-11), insulation exposed to sound A .34 .85 1.09 .97 .97 1.12 .95

6.0” (R-19), insulation exposed to sound A .64 1.14 1.09 .99 1.00 1.21 1.05

3.5” (R-11), insulation exposed to sound E-405 .80 .98 1.01 1.04 .98 1.15 1.00

6.0” (R-19), insulation exposed to sound E-405 .86 1.03 1.13 1.02 1.04 1.13 1.05

3.5” (R-19) FRK facing exposed to sound A .56 1.11 1.16 .61 .40 .21 .80

6.0” (R-19), FRK facing exposed to sound A .94 1.33 1.02 .71 .56 .39 .90

Facing FlameSpread

Smoke Developed

FuelContributed

FRK 0 0 0

1

Rso + R1 + R2 + R3 + RsiHere U =

Rso = Outside surface resistanceR1 = External sheetingR2 = AFICO insulationR3 = Internal sheeting or lining if anyRsi = Inside surface resistance Rso R1 R2 R3 Rsi

T

K



Performance & Physical Characteristics Performance & Physical Characteristics


Thermal Conductivity (ASTM C 177)

Installation Recommendation

Board Insulation products can be easily cut with a knife and neatly fitted into irregularly shaped areas.

For Vertical Applications: Board Insulation can be installed between furring, strips or Z channels. For enclosed applications the product can be impaled on impaling pins and/or adhered with adhesives.

For Horizontal Applications: Board Insulation can be installed by the use of impaling pins against horizontal surfaces.

On Masonry Surface: Board Insulation can be installed between wythes and on wall faces with impaling pins, mechanical fasteners and/or adhesives.

On Precast Concrete: Board Insulation can be installed using impaling pins and/or appropriate adhesives.

Sound Absorption Coefficients (ASTM C 384)Impedance Tube Method

Sound Absorption CoefficientsReverberation Chamber Method (Unfaced)

Insulation Thickness

Sound Absorption Coefficient at Frequencies (Hz)

Rigid 125 250 500 1000 2000 NRC

25mm ( 1 in ) 0.12 0.32 0.52 0.84 0.93 0.65

38mm (1 ½ in ) 0.22 0.36 0.58 0.92 0.94 0.70

50mm ( 2in ) 0.31 0.44 0.73 0.92 0.95 0.75

Insulation Thickness

Sound Absorption Coefficient at Frequencies (Hz)

125 250 500 1000 2000 NRC

Flexible

25mm ( 1 in ) 0.14 0.27 0.53 0.69 0.84 0.60

Semi-rigid

25mm ( 1 in ) 0.09 0.26 0.64 0.90 1.10 0.70

50mm ( 2in ) 0.28 0.80 1.12 1.18 1.10 1.05

Rigid

25mm ( 1 in ) 0.10 0.26 0.69 0.99 1.08 0.75

50mm ( 2in ) 0.26 0.75 1.17 1.14 1.07 1.05

0.10

0.08

0.06

0.04

0.02The

rma

l Co

nd

uct

ivit

y(K

)W/

m o

C

Mean Temperature, oC

0 20 40 60 80 100 120 140 160

Flexible

Semi-RigidRigid

Installation Recommendation

Board Insulation products can be easily cut with a knife and neatly fitted into irregularly shaped areas.

For Vertical Applications: Board Insulation can be in-stalled between furring, strips or Z channels. For enclosed applica-tions the product can be impaled on impaling pins and/or adhered with adhesives.

For Horizontal Applications: Board Insulation can be installed by the use of impaling pins against horizontal surfaces.

On Masonry Surface: Board Insulation can be installed between withes and on wall faces with impaling pins, mechanical fasteners and/or adhesives.

On Precast Concrete: Board Insulation can be installed using impaling pins and/or appropriate adhesives.

Sound Absorption Coefficients (ASTM C 384)

Insulation Sound Absorption Coefficient at Frequencies (Hz)

Thickness 125 250 500 1000 2000 NRC

Flexible

25 mm ( 1in ) 0.14 0.27 0.53 0.69 0.84 0.60

50 mm ( 2in ) 0.22 0.36 0.58 0.92 0.94 0.70

Semi-Rigid

25 mm ( 1in ) 0.09 0.26 0.64 0.90 1.10 0.70

50 mm ( 2in ) 0.28 0.80 1.12 1.18 1.10 1.05

Rigid

25 mm ( 1in ) 0.10 0.26 0.69 0.99 1.08 0.75

50 mm ( 2in ) 0.26 0.75 1.17 1.14 1.07 1.05

[email protected] www.afico.com.sa


For more information call the insulation professionals:

H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]

Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]

Jeddah office:

[email protected]

Tel: Fax: E-mail:

Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]

Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]

ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING

AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.

PRODUCTS PRODUCTS CODE

Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB

MAINTENANCE

No maintenance is required. Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.

The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.

STORAGE

To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.

WARRANTY

See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,

installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.

Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.

AVAILABILITY

Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.

Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.

Special products are manufactured on request.

Authorized Distributor

Pub No. 05-TDS-CWI Printed November 2007



H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail:

Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail:

Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:

Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail:




Our GREEN promise the healthy soluton





MAINTENANCE

No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.


STORAGE


WARRANTY



Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The

The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.

AVAILABILITY

Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia,

and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.



Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP










Our GREEN promise the healthy solut on





MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY










Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY





H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 13 847 2901 / 847 1519 / 847 2301 Fax: +966 13 847 3605 E-mail: [email protected]

Dammam Office: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 13 847 2901 / 847 1519 Fax: +966 13 847 3605 E-mail: [email protected]

Riyadh Office: P.O.Box 251, Riyadh 11411, Saudi Arabia Tel: +966 11 472 5555 ext. 5980 Fax: +966 11 291 0162 E-mail: [email protected]

Jeddah Office: P.O. Box 7504, Jeddah 21472, Saudi Arabia Tel: +966 12 670 0020 ext. 134 Fax: +966 12 671 4566. Email: [email protected]


Export Office: P.O. Box 90-284, Jdeidet El Metn, Beirut – Lebanon Tel: +961 3 709006 E-mail: [email protected]

See manufacturer’s General Terms and Conditions of Sale. As and/or OCF has no control over installation design, installation workmanship, accessory materials, or conditions of application, and/or OCF does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.

Arabian Fiberglass Insulation Company( ) reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.






Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY





No maintenance is required. Board Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot proof, odorless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.

The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fiberglass is non toxic and not hazardous to health.







Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY










Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY










Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY





Manufactured by Arabian Fiberglass Insulation Company, Ltd. ( ) member of Zamil Industrial Co. (ZI,) with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OCF), Toledo, Ohio, U.S.A.




Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDB

Board Insulation BDRoof Deck Board Insulation RI/RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation PEBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner QLQuiet Liner Board QLB















MAINTENANCE

No maintenance is required. Board Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.


STORAGE


WARRANTY




AVAILABILITY







Pub No. 05-TDS-BD Printed May 2016

blanket insulation bkt board insulation (bd) lyld . …product code: bkt arabian fiberglass...

Documents