blanking line 3
DESCRIPTION
hfhfdyhseetgTRANSCRIPT
-
Blanking line Technical details:
Max. Coil weight 35t Coil changing time 7 min Max. coil width 2.000 mm Coil thickness 0,5 3,00 mm Pressing force 8.000 kN Max. stroke rate 100 1/min Blank dimensions With 2 stacking positions 2.100 x 2.000 mm With coupling of the stacking positions 4.100 x 2.000 mm
This blanking line is perfectly suited to produce complex steel structure parts! It consists of a coil line, a servo press, and a
stacking device with 2 stacking positions as well as noise protection.
Short changing times (coil 7 minutes, tool 17 minutes) contribute to a smooth production. They are achieved thanks to an
automatic coil change and an automatic adjustment of the stacking masks. While changing the stacks it is possible to
produce without interruption. Furthermore, the servo press is integrated in the whole concept and designed for a stroke
rate up to 100 1/min in conventional mode. By managing the whole project for a German car manufacturer, DREHER proved
once again its competence in the sector of blanking lines.