Radio / CD

Alicante CD30 Kiel CD30 Lausanne CD30

Operating instructions

2 1 3 4 5 6

14 13 7 12 11 10 9 8

3SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH DEUTSCH

PORTUGUS

ESPAOL

CONTROLS1 2 Button to release the control panel FM button selects the FM memory FMT button Travelstore (not on the Kiel CD30) Volume control ON button switches the unit on/off RDS button switches the RDS function on/off ML button selects the MW and LW frequency ranges TS button activates the Travelstore function on the Kiel CD30 CD compartment CD eject CDC button selects CD, radio and CD changer (if connected) sources AUDIO button sets bass and treble LD button switches the loudness function on/off Arrow buttons GEO button sets balance and fader MENU button opens the basic settings menu Buttons 1-5 TRAFFIC button activates/ deactivates traffic information standby

3 4 5 6

7 8

9

: ; < = >

22

CONTENTSRoad safety ................................... 24 Installation ..................................... 24 Accessories .................................. 24 Guarantee ..................................... 24 International telephone hotline ........ 24 Switching to CD mode .................. 33 Selecting a track ........................... 33 Random play (MIX) ........................ 34 Scanning tracks (SCAN) ............... 34 Setting the scantime ...................... 34 Repeating a track (REPEAT) .......... 34 Pausing playback (PAUSE) ............ 34 Changing the display ..................... 34 Traffic announcements in CD mode 35 Ejecting a CD ................................ 35DEUTSCH PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH

Important information ............ 24

CD mode ................................ 33

Theft protection ..................... 25Removable control panel ............... 25 Theft protection CODE .................. 26

Switching on/off .................... 27 Volume adjustment ................ 27Setting the power-on volume ......... 27 Mute setting .................................. 28 Mute while telephoning .................. 28

CD changer mode .................. 35Switching to CD changer mode ..... 35 Selecting a CD .............................. 35 Selecting a track ........................... 35 Changing the display ..................... 35 Repeating individual tracks or whole CDs (REPEAT) .................... 36 Random play (MIX) ........................ 36 Scanning all tracks on all CDs (SCAN) ......................................... 36 Pausing playback (PAUSE) ............ 36

Radio mode ............................ 28Switching to radio mode ................ 28 Changing the display ..................... 28 RDS functions (AF, REG) .............. 28 Selecting the frequency range / memory ......................................... 29 Tuning into a station ....................... 29 Setting the sensitivity of the station search mode ................................. 29 Storing stations ............................. 30 Storing stations automatically (Travelstore) .................................. 30 Listening to preset stations ............ 30 Programme type (PTY) .................. 30 Treble reduction feature during interference (HICUT) ..................... 31

Time (CLOCK) ........................ 37Displaying the time ........................ 37 Setting the time manually ............... 37 Selecting 12/24-hour clock mode .. 37 Displaying the time when the unit is off .............................................. 37

Audio settings ........................ 38Switching loudness on/off ............. 38

Traffic information reception . 32Switching traffic information priority on/off ............................................ 32 Setting the traffic announcement volume .......................................... 32 Switching off the warning sound .... 33

Volume distribution settings .. 38Balance settings ............................ 38 Fader settings ............................... 38

External audio sources .......... 39 Technical data ........................ 39

23

IMPORTANT INSTRUCTIONSImportant informationBefore using your car radio, please read these instructions carefully and familiarise yourself with the unit. Keep these instructions in your vehicle for later reference. CD changer You can connect the following Blaupunkt CD changers: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. You can also connect the CDC A 05 and CDC A 071 CD changers by using a special adapter cable (Blaupunkt no.: 7 607 889 093).

Road safetyRoad safety has priority. Only operate your car radio if the road and traffic conditions allow you to do so. Familiarise yourself with the unit before setting off on your journey. You should always be able hear police, fire and ambulance sirens from afar. For this reason, set your car radios volume to a suitable level.

GuaranteeThe scope of the guarantee is orientated around the regulations in force within the country in which the unit was purchased. Regardless of what the legal regulations may stipulate, Blaupunkt provides a twelve-month guarantee. If you have any questions regarding the guarantee, please contact your authorised Blaupunkt dealer. The purchase receipt is accepted as proof of guarantee in all cases.

InstallationIf you want to install your car radio yourself, read the installation and connection instructions that follow these operating instructions.

AccessoriesOnly use accessories approved by Blaupunkt. Remote control The optional RC 08 remote control allows you to safely access the most important functions from your steering wheel. Amplifier All Blaupunkt amplifiers can be used.

International telephone hotlineIf you have any questions regarding the operation of your car radio or if you require further information, please do not hesitate to call us! The information hotline numbers are printed on the last page of these instructions.

24

THEFT PROTECTION1 Removable control panelAs a way of protecting your car radio against theft, the unit is equipped with a removable control panel (release panel). Without this control panel, the car radio is worthless to a thief. Protect you car radio against theft by taking the control panel with you every time you leave your vehicle. Do not leave the control panel in your vehicle not even in a hiding place. The control panel has been designed to be easy to use. Note: q Never drop the control panel. q Never expose the control panel to direct sunlight or other heat sources. q Protect the control panel against moisture. q Store the control panel in the supplied case. q If the unit was still switched on when you removed the control panel, the unit will automatically switch on with the last settings activated (i.e. radio, CD or CD changer mode) when the panel is replaced. Removing the control panelDEUTSCH

Theft protection

First, pull the control panel straightoff the unit and then out towards the left. The unit switches off after the control panel is removed. The current settings are saved. Any CD already inserted in the unit remains there.

q

q q

Attaching the control panel

right into the units panel locking mechanism.

Press the left-hand edge of thecontrol panel into the unit until it clicks into place.

Press button 1.The control panel locking mechanism opens.

Note: q When attaching the control panel, make sure you do not press the display.

25

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

Slide the control panel from left to

ITALIANO

FRANAIS

ENGLISH

THEFT PROTECTIONTheft protection CODEAs a way of protecting your car radio against theft, the system features a fourdigit code.You have to enter this number every time the unit is disconnected from your vehicles electrical power supply. As a factory default, the code entry request function is deactivated. However, you do have the option of activating this function. The numerical code is printed on the pass card supplied with your unit. Note: Never keep your radios pass card in your vehicle! Activating/deactivating the code In order to activate/deactivate the code request function, proceed as follows: Note: To prevent unauthorised persons from deactivating the code, you will have to enter the numerical code in order to deactivate the code request function. Entering the code

Switch on the unit.CODE appears in the display first of all and is followed by four zeros.

Keep pressing station button 1 =until the first number of your code appears in the display.

Keep pressing station button 2 =until the second number of your code appears in the display.

Keep pressing station button 3 =until the third number of your code appears in the display.

Press the ON button 4 to switchoff the unit.

Keep pressing station button 4 =until the fourth number of your code appears in the display.

Press station buttons 1 and 4 = atthe same time.

Keep these station buttons pressedwhile switching the unit on by pressing the ON button 4.

Once the correct code is displayed,press the or button :. Note: If the code is entered incorrectly three times, you will have to wait for a fixed time period. WAIT 1 H appears in the display. The unit must remain switched on during this hour.

Keep station buttons 1 and 4 =pressed until PUNKT appears in the display.

Release the station buttons.The code request function is now activated.

Follow the same procedure todeactivate the code request function.

26

SWITCHING ON/OFFSwitching on/offThere are various ways of switching the unit on/off. q Switching on/off using the vehicle ignition. If the unit is correctly connected to the vehicles ignition, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off.

VOLUME ADJUSTMENTThe system volume can be adjusted in steps from 0 (off) to 66 (maximum).DEUTSCH PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH

Volume adjustment

To increase the system volume,turn the volume control 3 to the right.

To decrease the system volume,turn the volume control 3 to the left.

To do so, press button 4 until theunit turns on. Note: To protect the vehicle battery, the unit will switch off automatically after one hour. q Switching on/off using the removable control panel.

Setting the power-on volumeYou can set the units default power-on volume.

Pressing the MENU < button. Press the : button.ON VOLUME appears in the display.

Set the power-on volume using theand buttons :. To assist you in setting the power-on volume, the volume will change in response to the changes you make. If you set the power-on volume to 0: every time you turn the unit on, the power-on volume will be the same as the volume level that was set before the unit was last switched off. Risk of serious injury. If the power-on volume is set to maximum, the volume level can be very high when the unit is switched on. If the volume was set to maximum before the unit was switched off and the power-on volume is set to 0, the volume level can be very high when the unit is switched on again. This can cause hearing damage. 27

Remove the control panel.The unit switches off.

Attach the control panel again.The unit switches on. The settings (radio, CD or CD changer) that were set before the unit was switched off will be reactivated. q Switching on/off using button 4.

To switch the unit on, press button4.

To switch the unit off, press button4 for longer than two seconds.

VOLUME ADJUSTMENT When you have finished makingyour changes, press the MENU button