blfritri-09r pre-fab systems...2 table of contents we give you total flexibility table of contents
TRANSCRIPT
Ruff-IN™Pre-Fab SystemsBLFRITRI-09R
2
Table of Contents
We Give YouTotal Flexibility
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Ruff-IN™ & Total Ruff-IN™ Service Advisors . . . . . . . . . . . . . . . . . . . . . . . 3
Explanation of Offerings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Quick Ship Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Configurator Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 & 7
Pictorial Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 & 9
Ruff-IN SectionCroc-Lok™ Box Mounting Brackets & Assemblies . . . . . . . . 10 & 11
Telescoping Slider Brackets & Assemblies . . . . . . . . . . . . . . . . 12 & 13
Floor Mount Box Supports & Assemblies . . . . . . . . . . . . . . . . . . 14 & 15
Double Sided Box Support Brackets & Assemblies . . . . . . . 16 & 17
Single Side Box Support & Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Uni-Mount™ Box Support & Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . 19
Multiple Box Mounting Bracket & Assemblies . . . . . . . . . . . . . 20 & 21
Open Box Support Bracket & Assemblies . . . . . . . . . . . . . . . . . . 22 & 23
Conduit & Box Support Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . 24 & 25
Electrical Box T-Bar Fasteners & Assemblies . . . . . . . . . . . . . . 26 & 27
T-Bar Fan / Fixture Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Plaster Rings with Wiring Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Ruff-IN MC Cable Solutions SectionTotal Ruff-IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Introduction & Step 1 - Send in drawings . . . . . . . . . . . . . . . . . . . . . . . 32
Step 2 - Project Questionnaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Step 3 - Quotation Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Step 4 - Approval Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Room Drawing Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Labeling & Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Ruff-IN Assemblies w/ MC Cable - Option 1 . . . . . . . . . . . . . . . 38 & 39
Ruff-IN Assemblies w/ MC Cable - Option 2 . . . . . . . . . . . . . . . 40 & 41
MC Cable Whips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 & 43
AccessoriesSpecSeal®† Powershield (Firestop Pads) . . . . . . . . . . . . . . . . . . . . . . . . . 44
Metal Protector Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Adjustable Plaster Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Plaster Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Conduit/Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Wiring Devices - Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 & 51
Wiring Devices - Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 & 53
ArrowLink™ Modular Wiring Devices . . . . . . . . . . . . . . . . . . . . . . . 54 & 55
www.cooperbline.com/Ruff-IN
Introductio
nRuff-IN
Total R
uff-INAccesso
ries
Introduction
† Marks shown are property of respective owners.
3
Service Advisors
How The Service Advisor WorksCooper B-Line knows that your time is important! That’s why the color-coding system in this catalog is designed to helpyou select products that fit your service needs. Products are marked to indicate the typical lead time for orders of Ruff-IN™
assemblies.
Customer: How do I select my brackets, boxes, plaster rings, and devices so that I get the quickest turnaround?
Service Advisor: Each part of our selection chart is shown in colors. If any section of a part number is a differentcolor, the part will typically ship with the longer lead time represented by the colors.
Basic Ruff-IN = 3 to 5 day lead time for quantities of 1000 or lessRuff-IN w/Wiring Devices = 10 to 15 day lead time for quantities of 500 or less.Non Stock Components = Call factory for lead time.
Example: BB216TS - 2 10 40 A - P GBW Call factory for lead time(from page 12) because of the Non StockLead time(days) 3-5 3-5 3-5 3-5 3-5 3-5 call wiring device.
factory
Changing the part number from GBW to EBW will change the coding to yellow for the wiring device.The new lead time for the assembly would be 10-15 working days because of the standard device.
Ruff-IN Service Advisor
Ruff-IN MC Cable Solutions Service Advisor
New Service Advisor
Ruff-IN with MC Cables Service Advisor
� MC Cable Whips Only = 3-5 days for Quantities of 1000 or less
� Ruff-IN with MC cable = 15-20 days for Quantities of 1000 or less
� Total Ruff-IN Quotation = 1-5 days*
� Total Ruff-IN Order = 10-20 days*
* Lead time varies depending on the project scope
Introductio
n
Cooper B-Line Has The Total Pre-Fab Offering…No matter what your preference for pre-fab may be, Cooper B-Line has it! Choose the pre-fab offering below that best fits your needs:
Basic Ruff-IN™Offering Contents: Bracket, Box, Mud Ring, Ground Wire
• Ideal solution for a contractor sampling pre-fab for the first timethat wants to keep the control of his or her project.
• Published lead times of 3-5 days ARO, and NEXT DAYSHIPPING ON (16) QUICK-SHIP ASSEMBLIES.
Ruff-IN™ with Wiring DevicesOffering Contents: Bracket, Box, Mud Ring, Wiring Assembly, Device or ArrowLink™
Connector, Protective Cover Plate
• Assemblies are pre-wired for quick plug-and-play installationusing Wago®† or wire nut connectors.
• Choose from over 100 cataloged device options• Cooper Wiring Device's ArrowLink connector is offered in a
pre-wired Ruff-IN assembly. • Using the Ruff-IN Configurator, design each part number
included in your project BOM, then click on icons to instantlyview assembly and wire configuration drawings.
Ruff-IN™ with MC cablesOffering Contents: Basic Ruff-IN with Wiring Assembly, Device or ArrowLink
Connector, Protective Cover Plate, MC Cable whip withMC connector(s)
• Pre-wired Ruff-IN assemblies with devices and a pre-cut MCcable whip attached.
• Whip lengths available in 5-foot increments.• Includes option to order MC cable whips only.• Offering explained further on pages 38-43.
Total Ruff-IN™Offering Contents: Engineering Take-off Service, Ruff-IN Assemblies, and
MC Cable Whips
• Perfect for a contractor interested in trying pre-fab for the first timethat needs the engineering and assembly expertise of Cooper B-Line.
• Industry leading, published lead times for Total Ruff-IN quotationresponses and order assembly.
• For more details, see pages 30-37.
4
Explanation of OfferingsIntroduction
† Marks shown are property of respective owners.
5
Programs
Distributor Quick Ship ProgramNext Day Shipping Available on
12 Ruff-IN™ Assemblies & 16 Rapid Ring™ Assemblies
• No need to request a lead time, ordertoday and we’ll ship out of stocktomorrow!
Ruff-IN Quick Ship Pre-Fab AssembliesCBL Part # UPC # Description MaximumBBF Series Floor-mount Order Qty.
BBF18-1104DA 78205154072 18" BBF floor-mount, 1-gang 5/8" plaster ring, TP403 box, stranded ground wire 50BBF18-1104D 78205154065 18" BBF floor-mount, 1-gang 5/8" plaster ring, TP403 box, solid ground wire 50BBF18-1124DA 78205155199 18" BBF floor-mount, 1-gang 3/4" plaster ring, TP403 box, stranded ground wire 25BBF18-1124D 78205154176 18" BBF floor-mount, 1-gang 3/4" plaster ring, TP403 box, solid ground wire 125Double-Sided Box SupportBB76-1104DA 78205155200 6" Double-sided box support 1-gang 5/8" plaster ring, TP403 box, stranded ground wire 100BB76-1104D 78205138768 6" Double-sided box support 1-gang 5/8" plaster ring, TP403 box, solid ground wire 25BB76-1124DA 78205154049 6" Double-sided box support 1-gang 3/4" plaster ring, TP403 box, stranded ground wire 50BB76-1124D 78205138771 6" Double-sided box support 1-gang 3/4" plaster ring, TP403 box, solid ground wire 25Telescoping Slider BracketBB216TS-1104DA 78205139289 16" Telescoping Slider Brkt,1-gang 5/8" plaster ring, TP403 box, stranded ground wire 25BB216TS-1104D 78205138619 16" Telescoping Slider Brkt, 1-gang 5/8" plaster ring, TP403 box, solid ground wire 25BB216TS-1124DA 78205139292 16" Telescoping Slider Brkt, 1-gang 3/4" plaster ring, TP403 box, stranded ground wire 25BB216TS-1124D 78205138621 16" Telescoping Slider Brkt, 1-gang 3/4" plaster ring, TP403 box, solid ground wire 250
Rapid Ring Quick Ship Pre-Fab AssembliesBBF18-1RR4DA 78205176289 18" BBF floor-mount, 1-gang Rapid Ring, TP403 box, stranded ground wire 50BBF18-1RR4D 78205176290 18" BBF floor-mount, 1-gang Rapid Ring, TP403 box, solid ground wire 50BBF18-2RR4DA 78205176084 18" BBF floor-mount, 2-gang Rapid Ring, TP403 box, stranded ground wire 50BBF18-2RR4D 78205176293 18" BBF floor-mount, 2-gang Rapid Ring, TP403 box, solid ground wire 50BB76-1RR4DA 78205176085 6" Double-sided box support 1-gang Rapid Ring, TP403 box, stranded ground wire 50BB76-1RR4D 78205176301 6" Double-sided box support 1-gang Rapid Ring, TP403 box, solid ground wire 50BB76-2RR4DA 78205176302 6" Double-sided box support 2-gang Rapid Ring, TP403 box, stranded ground wire 50BB76-2RR4D 78205176303 6" Double-sided box support 2-gang Rapid Ring, TP403 box, solid ground wire 50BB216TS-1RR4DA 78205176294 16" Telescoping Slider Brkt,1-gang Rapid Ring, TP403 box, stranded ground wire 50BB216TS-1RR4D 78205176295 16" Telescoping Slider Brkt, 1-gang Rapid Ring, TP403 box, solid ground wire 50BB216TS-2RR4DA 78205176296 16" Telescoping Slider Brkt, 2-gang Rapid Ring, TP403 box, stranded ground wire 50BB216TS-2RR4D 78205176297 16" Telescoping Slider Brkt, 2-gang Rapid Ring, TP403 box, solid ground wire 50BB216TS-1RR4DA 78205176088 16" Telescoping Brkt with Croc Lok™,1-gang Rapid Ring, TP403 box, stranded ground wire 50BB216TS-1RR4D 78205176298 16" Telescoping Brkt with Croc Lok, 1-gang Rapid Ring, TP403 box, solid ground wire 50BB216TS-2RR4DA 78205176299 16" Telescoping Brkt with Croc Lok, 2-gang Rapid Ring, TP403 box, stranded ground wire 50BB216TS-2RR4D 78205176300 16" Telescoping Brkt with Croc Lok, 2-gang Rapid Ring, TP403 box, solid ground wire 50
BBF18-1104DA BB76-1104D BB216TS-1104D
Introductio
n
See Ruff-IN Pre-Fab Systems brochure for completeproduct information and part numbers.
Double Sided BoxSupport withRapid Ring
Telescoping SliderBracket withRapid Ring
6
Ruff-IN Configurator
Introducing Cooper B-Line’s Ruff-IN™ Configurator -Developed to be the ideal solution for creating a project bill of material.Download the Ruff-IN configurator at www.cooperbline.com/ruff-in and see for yourself how easy it isto navigate through the component selection process!
For assemblies thatinclude wiring devices,the configuratorprovides a wiringconfiguration drawingthat details exactly howthe wiring device willbe wired in theassembly.
Note: Voice Demo Training Video Tutorial is available atwww.cooperbline.com/ruff-in
Create Assembly Selection Tab
Wiring Configuration Drawing
Determine projectsavings when usingRuff-IN assembliesby clicking on thelink to the Ruff-INLabor SavingsCalculator
Introduction
7
Ruff-IN ConfiguratorProject Rooms/Floors Tab
Project Summary Tab
3-D Assembly Drawing
Instantly view a 3-Dassembly drawing ofyour configuredassembly
Click to automaticallyrequest a quote foryour project!
Organize ProjectBOMs to ship byspecific room and/orfloor
Introductio
n
Croc-Lok™ Box Mount BracketPages 10 & 11
Floor Mount Box SupportPages 14 & 15
Telescoping Slider BracketPages 12 & 13
Single Sided Box SupportPage 18
Uni-Mount™ Box SupportPage 19
Multiple Box Mounting BracketPages 20 & 21
Open Box Support BracketPages 22 & 23
Double Sided Box SupportPages 16 & 17
8
Pictorial Index
Conduit & Box Support FastenersPages 24 & 25
Electrical Box T-Bar FastenersPages 26 & 27
Fan/Fixture Hanger AssemblyPage 28
Plaster Rings With Wiring DevicesPage 29
Total Ruff-IN Steps 3 & 4Quotation & Approval Packages
Pages 34 & 35
Total Ruff-IN™ Steps 1 & 2Send in Drawings and Complete Project
Questionnaire Pages 32 & 33
Room Drawing Explanation,Labeling & Packaging
Pages 36 & 37
Ruff-IN Contractor Review Sheet (PF-APPROVALFORM-RUFFIN)
Job Name:
Shipdate for Complete Order
CONTRACTOR SIGNATURE OF APPROVAL FOR ASSEMBLY DRAWINGS
I certify the assembly drawings and other quantities presented on _____________ have been reviewed and are correct.I am aware that any changes requested and/or made to these drawings could extend the project lead time.
I certify the room drawings detailing assembly and whip location within each room that are presented on ___________have been reviewed and are correct. I am aware that any changes requested and/or made to these drawings couldextend the project lead time.
CONTRACTOR SIGNATURE OF APPROVAL FOR ROOM DRAWINGS
CONTRACTOR SUGGESTED DATE
Project Scope
Initial for Approval
* Fax this sheet to (618-654-9191, ATTN: Ruff-IN* Email approval to [email protected] is also acceptable
Initial for Approval
Contractor Name Contractor Signature
Contractor Name Contractor Signature
Attachment:
(For multiple shipdate option see page 2)
PO #:B-Line Order #:
Ruff-INAssemblies with MC Cable - Option 2
Pages 40 & 41
Ruff-IN™
Assemblies with MC Cable - Option 138 &39
Ruff-INMC Cable WhipsPages 42 & 43
Introduction
ArrowLink™ Modular Wiring Devices with Ruff-IN Pre-Fab AssembliesThe ArrowLink™ Connector end is now available as an accessory in the Ruff-IN Pre-Fab Systems offering.
Pages 54 & 55
Wiring Devices - ReceptaclesPages 50 & 51
Cable & Conduit ConnectorsPage 49
Wiring Devices - SwitchesPages 52 & 53
• ArrowLink™ is available with every bracket option that includes the choiceto add a wiring device. Each brochure page includes information on howArrowLink can be added to an assembly.
• Assemblies will be pre-wired with ArrowLink connector end included toallow for quick cable installation.
• Assemblies include a cover plate attached to the mud ring for additionalprotection.
• The ArrowLink Modular devices are soldseparately. See your local Cooper WiringDevice representative for details.
• For more information on ArrowLinkModular Devices see pages 54 & 55.
9
Pictorial IndexIntro
ductio
n
Protector PlatesPage 46
Adj. Plaster RingsPage 47
Firestop PadsPage 45
Plaster RingsPage 47
Electrical BoxesPage 48
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
10
CROC-LOK™ Box Mounting Bracket
BB216TCL
BB2CL-4D BB2CL-2104DA-WAAR
Features
• The tool-less design enables Croc-Lok assemblies to be fieldinstalled in less than 4 seconds. Simply squeeze, secureand walk away.
• Outlet boxes mount to the Croc-Lok with single screw. • The Croc-Lok Box Mounting Bracket is an improved version
of the current BB2TS Slider Bracket.• Recently redesigned to include raised dimples that lock into
holes on the telescoping bar.• Redesign includes screw holes in the face plate, which
create the option to screw the Croc-Lok to a telescoping bar
BB2CL
Telescoping Bar with CROC-LOK AssembliesFeatures• The Croc-Lok Box Mounting Bracket is an improved version of the
current BB2TS Slider Bracket.• The narrow width of the Croc-Lok allows for up to three - 4” boxes
to be installed within a 16” stud spacing, and up to four - 4” boxeswithin a 24” stud spacing.
• Its design offers placement flexibility by locking in place firmly at anyposition along the telescoping bar.
• Croc-Lok box assemblies are sold with or without telescoping bars.To reduce the lines on your BOM consider ordering Croc-Lok boxassemblies and field install.
• Croc-Lok box assemblies can be attached before or after thetelescoping bar is mounted in the stud wall.
• Download the Ruff-IN™ configurator for free atwww.cooperbline.com/ruff-in and see for yourself how much easier it allows you to create Ruff-IN part numbers.
UPC/PartNumber
StudSpacing Description Box
QtyCatalogNumber
782051 51291 BB2CL N/A Croc-Lok only 50782051 51292 BB216TCL 11” to 16” BB2-16T with Croc-Lok 20782051 51293 BB224TCL 15” to 24” BB2-24T with Croc-Lok 20U.S. Patent # 8,403,277
Note: Secures to Cooper B-Line BB2-16T and BB2-24T telescoping brackets only. For a standard 21/8” deep box, the studdepth must be 31/2” or greater. For a shallow 11/2” deep box, the stud depth must be 21/2” or greater.
Basic Ruff-IN = 3-5 day lead-time for quantities of 1000 or less.
Ruff-IN with Wiring Devices = 10-15 day lead-time for quantities of 500 or less.
Non Stock Components = Call factory for lead-time.
BB2CLinstalled onBB2-16T
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
11
CROC-LOK™ Box Mounting Bracket Assemblies
•• BB216TCL-1104DA-WAAR BB216TCL-1104DA-24DA-WAAR
BB216TCL - 1 10 4D A _ - _ _ _ _ _ _ - W AAR - _ _ _ _ - _ _ _ _ _ _ - _ _1 2 3 4 5
Step 1 Step 2 Step 3
6 5 62 47 8 9 8 10 8 11 12 7 8 9 8 10 8 11 12
For Installation Of One Box For Installation Of Second Box - If Desired
Step 1 - Basic Ruff-In
Stud SpacingBB216TCL = 11” to 18” Mounting Bar &
Croc-Loc AssemblyBB224TCL = 15” to 26” Mounting Bar &
Croc-Loc AssemblyBB2CL = Croc-Loc Assembly Only
Plaster Ring Style (see ps. 47)
1 = One Device2 = Two DeviceR = Round1AJ = One Device Adjustable *2AJ = Two Device Adjustable *Blank = Box Only
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Box Only orAdjustable Plaster Ring
Box Style (see pg. 48)
4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO5 = 411/16” Sq., 11/2” Deep554 = 411/16” Sq., 21/8” Deep, 3/4” KO
Ground Wire(Pre-installed devices require stranded wire)
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad (see pg. 45)
Blank = No PadF = Pad Installed
Step 2 - Connectors
Connector Top Left KO
Blank = No AttachmentL = Attachment Present
Connector Type (see pg. 49)
Blank = NoneA = QLK50S (1/2” single MC)B = QLK50D (1/2” double MC)C = QLK75 (3/4” single MC)D = SSBC50 (1/2” EMT Connector)E = SSBC75 (3/4” EMT Connector)F = SSBC100 (1” EMT Connector)
Connector Top Middle KO
Blank = No AttachmentM = Attachment Present
Connector Top Right KO
Blank = No AttachmentR = Attachment Present
1
2
6
3
4
5
7
9
10
8
Step 3 - Wiring Devices
Wire ConfigurationP = Pigtails w/4 Hole 1Wago®†
(all receptacles installed w/ground up)
R = Pigtails w/4 Hole Wago®†
(all receptacles installed w/ground down)
W = No Pigtails Wires Contained InsideBox (all receptacles installed w/ground up)
Y = No Pigtails Wires Contained Inside Box(all receptacles installed w/ground down)
M = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground up)
N = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground down)
Note: P, R, M and N configurations not availableif KO connectors are installed on the outlet box
Device Type or ArrowLinkConnector Options
Standard Device Type(see pgs. 50-53)
3 Letter Designator For 1 Device
Two 3 Letter Designators For 2 Different Devices
One 3 Letter Designator For 2 Of The Same Device
ArrowLink™ Connector Options(for more information see pgs. 54-55)
MCR = ArrowLink Connector, Receptacle/GFCIMCS = ArrowLink Connector, Single-Pole Switch
11
12
Step 1 Step 2 Step 3
•• Example Part Number shown below
* One device adjustable plasterrings are set at 3/4” raise and canbe adjusted to 11/2” raise.Two device adjustable plaster ringsare set at 5/8” raise and can beadjusted to 11/2” raise. Adjustable plaster ring can onlybe used on 4” sq. - 21/8” deepboxes.
Ruff-IN
† Marks shown are property of respective owners.
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
12
Telescoping Slider BracketsFeatures
Telescoping Slider Bracket AssembliesFeatures
• The industry’s only fully adjustable pre-fab bracket - fitsa range of stud spacings and both 11/2” and 21/8” deepboxes.
• Box can be attached to slider bracket before or afterslider is installed on telescoping bracket.
• Box location can be field-adjusted by moving slideralong telescoping bracket.
• Pre-assembled units available with two (2) boxesif desired.
• Ruff-IN™ assemblies available with box, plaster ring andground wire.
• Wiring devices available installed with 21/8” deep boxes. • Metal protector plate provided with all wiring device
assemblies. • Fire stop pad and cable/conduit connectors can also be
pre-installed if desired.• Next day shipping available on (4) BB216TS assemblies,
see page 5 for more information on the Ruff-IN QuickShip Program.
• Download the Ruff-IN configurator for free atwww.cooperbline.com/ruff-in and see for yourself howmuch easier it allows you to create Ruff-IN partnumbers.
UPC/PartNumber
StudSpacing Description Box
QtyCatalogNumber
782051 38614 BB216TS 11” to 18” BB2-16T with Slider Bracket 20782051 38628 BB224TS 15” to 26” BB2-24T with Slider Bracket 20782051 38613 BB2TS -- Slider Bracket Only 50Patent # 7,472,875
BB216TS-1104D
•• BB216TS-2104DA-PGBWBB216TS-2104DA-LARA-WKAV-14DN
BB216TS-2104D-14DN
BB216TS
BB224TS
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
13
Telescoping Slider Bracket Assemblies
BB216TS - 2 10 4D A _ - _ _ _ _ _ _ - P GBW - _ _ _ _ - _ _ _ _ _ _ - _ _1 2 3 4 5
Step 1 Step 2 Step 3
6 5 62 47 8 9 8 10 8 11 12 7 8 9 8 10 8 11 12
For Installation Of One Box For Installation Of Second Box - If Desired
Step 1 - Basic Ruff-In
Stud Spacing
BB216TS = 11” - 18”BB224TS = 15” - 26”
Plaster Ring Style (see pg. 47)
1 = One Device2 = Two DeviceR = Round1AJ = One Device Adjustable *2AJ = Two Device Adjustable *Blank = Box Only
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Box Only orAdjustable Plaster Ring
Box Style (see pg. 48)
4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO5 = 411/16” Sq., 11/2” Deep554 = 411/16” Sq., 21/8” Deep, 3/4” KO
Ground Wire(Pre-installed devices require stranded wire)
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad (see pg. 45)
Blank = No PadF = Pad Installed
Step 2 - Connectors
Connector Top Left KO
Blank = No AttachmentL = Attachment Present
Connector Type (see pg. 49)
Blank = NoneA = QLK50S (1/2” single MC)B = QLK50D (1/2” double MC)C = QLK75 (3/4” single MC)D = SSBC50 (1/2” EMT Connector)E = SSBC75 (3/4” EMT Connector)F = SSBC100 (1” EMT Connector)
Connector Top Middle KO
Blank = No AttachmentM = Attachment Present
Connector Top Right KO
Blank = No AttachmentR = Attachment Present
1
2
6
3
4
5
7
9
10
8
Step 3 - Wiring Devices
Wire ConfigurationP = Pigtails w/4 Hole 1Wago®†
(all receptacles installed w/ground up)
R = Pigtails w/4 Hole Wago®†
(all receptacles installed w/ground down)
W = No Pigtails Wires Contained InsideBox (all receptacles installed w/ground up)
Y = No Pigtails Wires Contained Inside Box(all receptacles installed w/ground down)
M = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground up)
N = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground down)
Note: P, R, M and N configurations not availableif KO connectors are installed on the outlet box
Device Type or ArrowLinkConnector Options
Standard Device Type(see pgs. 50-53)
3 Letter Designator For 1 Device
Two 3 Letter Designators For 2 Different Devices
One 3 Letter Designator For 2 Of The Same Device
ArrowLink™ Connector Options(for more information see pgs. 54-55)
MCR = ArrowLink Connector, Receptacle/GFCIMCS = ArrowLink Connector, Single-Pole Switch
11
12
Step 1 Step 2 Step 3
•• Example Part Number from page 12
* One device adjustable plasterrings are set at 3/4” raise and canbe adjusted to 11/2” raise.Two device adjustable plaster ringsare set at 5/8” raise and can beadjusted to 11/2” raise. Adjustable plaster ring can onlybe used on 4” sq. - 21/8” deepboxes.
Basic Ruff-IN™ = 3-5 day lead-time for quantities of 1000 or less.Ruff-IN with Wiring Devices = 10-15 day lead-time for quantities of 500 or less.Non Stock Components = Call factory for lead-time.
Ruff-IN
† Marks shown are property of respective owners.
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
14
Floor Mount Box SupportsFeatures
• New BBF floorstand provides the most rigid support in the industry.
• Far-side support accommodates 6”, 51/2”, 31/2”, and 21/2” stud depths.
• Fold-out tab built-in to attach floor stand to stud if desired.
• Integral “wings” provide rigid support when floorstand is mounted between studs.
• Optional cable containment clip securely attaches to floorstand without hardware.
• Finish: Pre-galvanized.
UPC/PartNumber
CatalogNumber
Box CenterHeight
BoxQty
782051 52944 BBF15 15” Floorstand 25782051 52945 BBF18 18” Floorstand 25782051 52946 BBF24 24” Floorstand 25
782051 52947 BBFC Cable Containment Clip 25
782051 52948 BBF15C 15” Floorstand 25with Cable Containment Clip
782051 52949 BBF18C 18” Floorstand 25with Cable Containment Clip
782051 52950 BBF24C 24” Floorstand 25with Cable Containment Clip
Floor Mount/Single Side Box Support Combo AssembliesFeatures
• Wiring devices available installed with 21/8” deep boxes.• Bottom kick plate depth shortened to slide under stud track more easily.• Double-sided bracket can be ganged to floor stand for multiple box applications.• Patented Marty-Mouse™ ears enable boxes to be secured in place with or without
the plaster rings.
• Available in three (3) bracket sizes - 15”, 18”, and 24”.
• Next day shipping available on (4) BBF18 assemblies, see page 5 formore information on the Ruff-IN Quick-Ship Program.
• Download the Ruff-IN™ configurator for free at www.cooperbline.com/ruff-inand see for yourself how much easier it allows you to create Ruff-IN partnumbers.
BBF24-31104DA-2104DA
BBF18
BBFC
BBFxxC
Patent #
7956285B2 & 5595362
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
15
Floor Mount Box Support & Assemblies
Step 1 - Basic Ruff-In
Box Height
BBF15 = 15”BBF18 = 18”BBF24 = 24”
Cable Containment
C = Include cable containmentBlank = Do not include cable containment
Stud Depth for Optional Second Box
Blank = No additional bracket3 = 31/2” & 21/2”4 = 4”, 31/2” & 21/2”5 = 6”, 51/2”, 31/2” & 21/2”
Plaster Ring Style (see pg. 47)
1 = One Device2 = One DeviceR = Round1AJ = One Device Adjustable *2AJ = Two Device Adjustable *Blank = Box Only
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Box Only orAdjustable Plaster Ring
Box Style (see pg. 48)
4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO5 = 411/16” Sq., 11/2” Deep554 = 411/16” Sq., 21/8” Deep, 3/4” KO431 = 4” Sq., 21/8” Deep, Int. MC ConnectorsBlank = Plaster Ring Only
Step 2 - Connectors
Connector Top Left KO
Blank = No AttachmentL = Attachment Present
Connector Type (see pg. 49)
Blank = NoneA = QLK50S (1/2” single MC)B = QLK50D (1/2” double MC)C = QLK75 (3/4” single MC)D = SSBC50 (1/2” EMT Connector)E = SSBC75 (3/4” EMT Connector)F = SSBC100 (1” EMT Connector)
Connector Top Middle KO
Blank = No AttachmentM = Attachment Present
Connector Top Right KO
Blank = No AttachmentR = Attachment Present
1
2
4
3
6
11
12
Step 3 - Wiring Devices
Wire ConfigurationP = Pigtails w/4 Hole Wagos®†
(all receptacles installed w/ground up)
R = Pigtails w/4 Hole Wago®†
(all receptacles installed w/ground down)
W = No Pigtails Wires Contained InsideBox (all receptacles installed w/ground up)
Y = No Pigtails Wires Contained Inside Box(all receptacles installed w/ground down)
M = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground up)
N = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground down)
Note: P, R, M and N configurations not availableif KO connectors are installed on the outlet box
Device Type or ArrowLinkConnector Options
Standard Device Type(see pgs. 50-53)
3 Letter Designator For 1 Device
Two 3 Letter Designators For 2 Different Devices
One 3 Letter Designator For 2 Of The Same Device
ArrowLink™ Connector Options(for more information see pgs. 54-55)
MCR = ArrowLink Connector, Receptacle/GFCIMCS = ArrowLink Connector, Single-Pole Switch
13
14
5
Step 1 - Basic Ruff-In (cont.)
Ground Wire(Pre-installed devices require stranded wire)
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad (see pg. 45)
Blank = No PadF = Pad Installed
7
9
10
8
Basic Ruff-IN™ = 3-5 day lead-time for quantities of 1000 or less.Ruff-IN with Wiring Devices = 10-15 day lead-time for quantities of 500 or less.Non Stock Components = Call factory for lead-time.
1 32 4 5 6 7 8 9 10 11 12 13 14
Step 1 Step 2 Step 3
BBF18 _ - _ 2 10 4D A _ - _ _ _ _ - W GDW - _ _ _ _ - _ _ _ _ - _ ___
For Installation Of One Box
4 6 7 8 9 10 11 12 13 14
Step 1 Step 2 Step 3For Installation Of Second Box - If Desired
BBF15C-1104DA-UMCR•• BBF18-2104DA-WGDW
* One device adjustable plasterrings are set at 3/4” raise and canbe adjusted to 11/2” raise.Two device adjustable plaster ringsare set at 5/8” raise and can beadjusted to 11/2” raise. Adjustable plaster ring can onlybe used on 4” sq. - 21/8” deepboxes.
•• Example Part Number shown below
Ruff-IN
† Marks shown are property of respective owners.
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
16
Double Sided Box Support Bracketwith patented Marty-Mouse™ Ears
Features
• Double side box support designed for Pre-Fab installations. Unit can beinstalled on either side of stud without repositioning box or devices.
• Patented Marty-Mouse Ears feature an innovative keyhole pattern to secureoutlet box to bracket with or without plaster ring.
• Marty-Mouse Ears simplify wiring of pre-fab units. Plaster ring can beremoved for full access to box contents while box remains in place.
• Wider box opening accommodates one or two gang adjustable plaster rings(B1AJ & B2AJ - see pg. 47).
• Enhanced far-side support stands up during drywall installation and outperforms competitor brackets.
• Finish: Pre-Galvanized
Double Sided Box Support Bracket AssembliesFeatures
• Ruff-IN™ assemblies available with box, plaster ring and ground wire.
• Wiring devices available installed with 21/8” deep boxes.
• Metal protector plated provided with all wiring device assemblies.
• Fire stop pad and cable/conduit connectors can also be pre-installedif desired.
• Next day shipping available on (4) BB76 assemblies, see page 5 formore information on the Ruff-IN Quick-Ship Program.
• Download the Ruff-IN configurator for free at www.cooperbline.com/ruff-inand see for yourself how much easier it allows you to create Ruff-IN partnumbers.
UPC/PartNumber Stud SizeCatalog
NumberBoxQty
781011 38645 BB73 31/2” & 21/2” 50781011 38717 BB74 4”, 31/2” & 21/2” 50781011 38759 BB76 6”, 51/2”, 31/2”, 21/2” 25
Patent # 5595362
BB74shown
BB73-1104D
BB73-2104D
BB76-1104D BB73-2104D-LAMARA BB73-2104D-LAMARA-PWAAW •• BB73-2104DA-PAAW
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
17
Double Sided Box Support Bracket
1 2 3 4 5 6 7 8 9 8 10 8 11 12
Step 1 Step 2 Step 3
Step 1 - Basic Ruff-In
Stud Depth
BB73 = 31/2” & 21/2”BB74 = 4”, 31/2” & 21/2”BB76 = 6”, 51/2”, 31/2 & 21/2”
Plaster Ring Style (see pg. 47)
1 = One Device2 = Two DeviceR = Round1AJ = One Device Adjustable *2AJ = Two Device Adjustable *Blank = Box Only
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Box Only orAdjustable Plaster Ring
Box Style (see pg. 48)
4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO5 = 411/16” Sq., 11/2” Deep554 = 411/16” Sq., 21/8” Deep, 3/4” KO431 = 4” Sq., 21/8” Deep, Int. MC ConnectorsBlank = Plaster Ring Only
Ground Wire(Pre-installed devices require stranded wire)
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad (see pg. 45)
Blank = No PadF = Pad Installed
Step 2 - Connectors
Connector Top Left KO
Blank = No AttachmentL = Attachment Present
Connector Type (see pg. 49)
Blank = NoneA = QLK50S (1/2” single MC)B = QLK50D (1/2” double MC)C = QLK75 (3/4” single MC)D = SSBC50 (1/2” EMT Connector)E = SSBC75 (3/4” EMT Connector)F = SSBC100 (1” EMT Connector)
Connector Top Middle KO
Blank = No AttachmentM = Attachment Present
Connector Top Right KO
Blank = No AttachmentR = Attachment Present
1
2
6
3
4
5
7
9
10
8
Step 3 - Wiring Devices
Wire ConfigurationP = Pigtails w/4 Hole Wago®†
(all receptacles installed w/ground up)
R = Pigtails w/4 Hole Wago®†
(all receptacles installed w/ground down)
W = No Pigtails Wires Contained InsideBox (all receptacles installed w/ground up)
Y = No Pigtails Wires Contained Inside Box(all receptacles installed w/ground down)
M = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground up)
N = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground down)
Note: P, R, M and N configurations not availableif KO connectors are installed on the outlet box
Device Type or ArrowLinkConnector Options
Standard Device Type(see pgs. 50-53)
3 Letter Designator For 1 Device
Two 3 Letter Designators For 2 Different Devices
One 3 Letter Designator For 2 Of The Same Device
ArrowLink™ Connector Options(for more information see pgs. 54-55)
MCR = ArrowLink Connector, Receptacle/GFCIMCS = ArrowLink Connector, Single-Pole Switch
11
12
BB73 - 2 10 4D A _ - _ _ _ _ _ _ - P AAW•• Example Part Number from page 16
* One device adjustable plasterrings are set at 3/4” raise and canbe adjusted to 11/2” raise.Two device adjustable plaster ringsare set at 5/8” raise and can beadjusted to 11/2” raise. Adjustable plaster ring can onlybe used on 4” sq. - 21/8” deepboxes.
Basic Ruff-IN™ = 3-5 day lead-time for quantities of 1000 or less.Ruff-IN with Wiring Devices = 10-15 day lead-time for quantities of 500 or less.Non Stock Components = Call factory for lead-time.
BB76-1104DA-PMCR(cover plate not shown)
Ruff-IN
† Marks shown are property of respective owners.
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
18
Single Sided Box Support & AssembliesFeatures
• Improved far-side support prevents box movement in wall cavity.• Adjustable far-side supports designed to reduce labor.• Brackets may be piggy-backed in series..• Ruff-IN™ assemblies available with box, plaster ring and ground wire.• Not recommended for pre-installed wiring devices.
See pages 16-17 for an improved Pre-Fab assembly solution.• Download the Ruff-IN configurator for free at www.cooperbline.com/ruff-in
and see for yourself how much easier it allows you to create Ruff-IN partnumbers.
Single Sided Box Support Bracket Assemblies
1 2 3 4 5 6
UPC/PartNumber Stud Size Box
QtyCatalogNumber
781011 18190 BB4-23 31/2” & 21/2” 100
781011 18200 BB4-4 4”, 31/2” & 21/2” 100
781011 18202 BB4-6 6”, 51/2”, 31/2”, 21/2” 100
BB4-23
BB4-4
BB4-6
BB423-1104DN
BB423-1104D
•• BB46-1104D
Box Style (see pg. 48)
4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO5 = 411/16” Sq., 11/2” Deep554 = 411/16” Sq., 21/8” Deep, 3/4” KO431 = 4” Sq., 21/8” Deep, Int. MC ConnectorsBlank = Plaster Ring Only
Ground Wire
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad (see pg. 45)
Blank = No PadF = Pad Installed
Stud Depth
BB423 = 31/2” & 21/2”BB44 = 4”, 31/2” & 21/2”BB46 = 6”, 51/2”, 31/2 & 21/2”
Plaster Ring Style (see pg. 47)
1 = One Device2 = Two DeviceR = Round1AJ = One Device Adjustable *Blank = Box Only
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Box Only orAdjustable Plaster Ring
1
2 6
3
4 5
BB46 - 1 10 4D _ _•• Example Part Number
Basic Ruff-IN = 3-5 day lead-time for quantities of 1000 or less.Non Stock Components = Call factory for lead-time.
* One device adjustable plaster rings are setat 3/4” raise and can be adjusted to 11/2” raise.Adjustable plaster ring can only be used on4” sq. - 21/8” deep boxes.
Ruff-IN
19
Uni-Mount™ Box Support & Assemblies
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
Features
• Uni-Mount™ provides a secure box support and features a built-inplaster ring.
• Rigid bracket design eliminates the need for far-side support.• Guide tabs ensure alignment on studs.• Ruff-IN™ assemblies available with box, plaster ring and ground wire.• Fire stop pad can be pre-installed in boxes if desired.• Not recommended for pre-installed wiring devices.
See pages 16-17 for an improved Pre-Fab assembly solution.
• Download the Ruff-IN configurator for free at www.cooperbline.com/ruff-inand see for yourself how much easier it allows you to create Ruff-IN partnumbers.
Uni-Mount™ Box Support Assemblies
BB40-10
BB45-8
BB40-10-4DN
•• BB45-10-4D
UPC/PartNumber
PlasterRing
BoxQty
CatalogNumber
782051 22768 BB40-08 1/2” raise 50782051 22771 BB40-10 5/8” raise 50782051 22772 BB40-12 3/4” raise 50782051 22773 BB45-08 1/2” raise 50782051 22774 BB45-10 5/8” raise 50782051 22775 BB45-12 3/4” raise 50
1 2 3 4 5
Ground Wire
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad (see pg. 45)
Blank = No PadF = Pad Installed
Plaster Ring Style
BB40 = One DeviceBB45 = Two Device
Plaster Ring Size
08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise
Box Style (see pg. 48)
4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO431 = 4” Sq., 21/8” Deep, Int. MC Connectors
1
2
3
4
BB45 - 10 - 4D _ _•• Example Part Number
5
Basic Ruff-IN = 3-5 day lead-time for quantities of 1000 or less.Non Stock Components = Call factory for lead-time.
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
20
Multiple Box Mounting BracketsFeatures
Multiple Box Mounting Bracket AssembliesFeatures
• Provides support for multiple boxes or plaster ringsbetween studs 16” or 24” on center.
• Available factory assembled with plaster rings and/orboxes with ground wire to reduce labor.
• Custom factory assemblies are ordered by specifyingplaster rings and/or boxes for each bracket position.
BB8-16
BB8-24
UPC/PartNumber
StudSpacing
BoxQty
CatalogNumber
781011 02898 BB8-16 16” 25
781011 02900 BB8-24 24” 25
BB816-104D-X-1-X
BB816-104D-1-1-X
BB816-104D-X-6-X
BB816-104D-X-1WGBW-X •• BB816-104D-X-1LARAWKAV-X
BB816-104D-X-1PCAA-X
• Custom factory assemblies are ordered by specifying boxinformation for each position opening.
• Ruff-IN™ assemblies available with box, plaster ring and ground wire.• Wiring devices available installed with 21/8” deep boxes.• Metal protector plate provided with all wiring device assemblies. • Fire stop pad and cable/conduit connectors can be pre-installed in
boxes if desired.• Download the Ruff-IN configurator for free at
www.cooperbline.com/ruff-in and see for yourself howmuch easier it allows you to create Ruff-IN part numbers.
21
3
21
3
4
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
21
Multiple Box Mounting Bracket Assemblies
1 32 4 5 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12
Position 1 Opening (if desired) Position 2 Opening (if desired) Position 3 Opening (if desired) Position Opening 4 (if desired)(on BB824 only)
Step 1 Step 2 Step 3 Step 2 Step 3 Step 2 Step 3 Step 2 Step 3
Step 1 - Basic Ruff-In
Stud Spacing
BB816 = 16”BB824 = 24”
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Box Only or Adjustable Plaster Ring
Box Style (see pg. 48)
4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO5 = 411/16” Sq., 11/2” Deep554 = 411/16” Sq., 21/8” Deep, 3/4” KO431 = 4” Sq., 21/8” Deep, Int. MC Connectors
Ground Wire(Pre-installed devices require stranded wire)
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad (see pg. 45)
Blank = No PadF = Pad Installed
Step 2 - Connectors
Position1 = One Device and Box ∆2 = Two Device and Box ∆J = One Device Adjustable Ring & Box *∆3 = One Device Plaster Ring Only4 = Two Device Plaster Ring Only5 = Box OnlyR = Round Plaster Ring and Box6 = One Device and Box, No Ground Wire7 = Two Device and Box, No Ground Wire8 = Round Plaster Ring and Box,
No Ground WireK = Adjustable Plaster Ring and Box,
No Ground Wire9 = Box Only, No Ground WireX = No Attachments
∆ Only Options 1, 2, & J can be usedwith wiring devices.
Connector Top Left KO
Blank = No AttachmentL = Attachment Present
Connector Type (see pg. 49)
Blank = NoneA = QLK50S (1/2” single MC)B = QLK50D (1/2” double MC)C = QLK75 (3/4” single MC)D = SSBC50 (1/2” EMT Connector)E = SSBC75 (3/4” EMT Connector)F = SSBC100 (1” EMT Connector)
Connector Top Middle KO
Blank = No AttachmentM = Attachment Present
Connector Top Right KO
Blank = No AttachmentR = Attachment Present
1 6
5
2
3
4
7
9
10
8
Step 3 - Wiring Devices
Wire ConfigurationP = Pigtails w/4 Hole Wago®†
(all receptacles installed w/ground up)
R = Pigtails w/4 Hole Wagos®†
(all receptacles installed w/ground down)
W = No Pigtails Wires Contained InsideBox (all receptacles installed w/ground up)
Y = No Pigtails Wires Contained Inside Box(all receptacles installed w/ground down)
M = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground up)
N = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground down)
Note: P, R, M and N configurations not availableif KO connectors are installed on the outlet box
Device Type or ArrowLinkConnector Options
Standard Device Type(see pgs. 50-53)
3 Letter Designator For 1 Device
Two 3 Letter Designators For 2 Different Devices
One 3 Letter Designator For 2 Of The Same Device
ArrowLink™ Connector Options(for more information see pgs. 54-55)
MCR = ArrowLink Connector, Receptacle/GFCIMCS = ArrowLink Connector, Single-Pole Switch
11
12
BB816 - 10 4D _ _ - X _ _ _ _ _ _ _ _ - 1 L A R A _ _ W KAV - X _ _ _ _ _ _ _ _ - X _ _ _ _ _ _ _ _•• Example Part Number from page 20
Note: If different box than called out in Step 1is used in any position, enter the designatorfor the box after the character of the position. For example ‘14D’ or ‘1432’.
* One device adjustable plasterrings are set at 3/4” raise and canbe adjusted to 11/2” raise.
Adjustable plaster ring can onlybe used on 4” sq. - 21/8” deepboxes.
Basic Ruff-IN™ = 3-5 day lead-time for quantities of 1000 or less.Ruff-IN with Wiring Devices = 10-15 day lead-time for quantities of 500 or less.Non Stock Components = Call factory for lead-time.
Ruff-IN
† Marks shown are property of respective owners.
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
22
Open Box Support Mounting BracketsFeatures
Open Box Support Mounting Bracket Assemblies
Features
• Cooper B-Line’s BB7 Series open box support securesboxes and plaster rings between studs 16” and 24” oncenter.
• Open design allows infinite adjustability, box can beplaced in any horizontal location.
• Stamped markings at 1/4”, 1/2” and 1” increments allowthe installer to easily locate the desired box position.
UPC/PartNumber
StudSpacing
BoxQty
CatalogNumber
781011 45325 BB7-16 16” 25
781011 45328 BB7-24 24” 25
BB716-104D-X-1-X
BB716-105D-2-X-2
BB716-104D-X-2PGDVAAW-X •• BB716-104D-X-2PKAV-X
• Custom factory assemblies are ordered by specifying boxinformation and location for each position.
• Ruff-IN™ assemblies available with box, plaster ring andground wire.
• Wiring devices available installed with 21/8” deep boxes.• Metal protector plate provided with all wiring device
assemblies. • Fire stop pad and cable/conduit connectors can be
pre-installed in boxes if desired.• Download the Ruff-IN configurator for free at
www.cooperbline.com/ruff-in and see for yourself howmuch easier it allows you to create Ruff-IN partnumbers.
BB7-16
BB7-24
21
3
2
1
3
4
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
23
Open Box Support Mounting Assemblies
Step 1 - Basic Ruff-In
Stud Spacing
BB716 = 16”BB724 = 24”
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” Raise
Box Style (see pg. 48)
4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO5 = 411/16” Sq., 11/2” Deep554 = 411/16” Sq., 21/8” Deep, 3/4” KO431 = 4” Sq., 21/8” Deep, Int. MC Connectors
Ground Wire(Pre-installed devices require stranded wire)
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad (see pg.45)
Blank = No PadF = Pad Installed
Step 2 - Connectors
Position1 = One Device and Box ∆2 = Two Device and Box ∆R = Round Plaster Ring and Box6 = One Device and Box, No Ground Wire7 = Two Device and Box, No Ground Wire8 = Round Plaster Ring and Box,
No Ground WireX = No Attachments
∆ Only Options 1 and 2 can be usedwith wiring devices.
If different box than called out in Step 1 is usedin any position, enter the designator for the boxafter the character of the position. For example ‘14D’ or ‘1432’.
Connector Top Left KO
Blank = No AttachmentL = Attachment Present
Connector Type (see pg. 49)
Blank = NoneA = QLK50S (1/2” single MC)B = QLK50D (1/2” double MC)C = QLK75 (3/4” single MC)D = SSBC50 (1/2” EMT Connector)E = SSBC75 (3/4” EMT Connector)F = SSBC100 (1” EMT Connector)
Connector Top Middle KO
Blank = No AttachmentM = Attachment Present
Connector Top Right KO
Blank = No AttachmentR = Attachment Present
1 6
5
2
3
4
7
9
10
8
Step 3 - Wiring Devices
Wire ConfigurationP = Pigtails w/4 Hole Wago®†
(all receptacles installed w/ground up)
R = Pigtails w/4 Hole Wago®†
(all receptacles installed w/ground down)
M = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground up)
N = Pigtails w/ Bare Wire Ends extending fromtop KOs, Twist-On Wire Connectors Inside Box(all receptacles installed w/ground down)
Note: P, R, M and N configurations not available if KO connectors are installed on the outlet box
Device Type or ArrowLinkConnector Options
Standard Device Type(see pgs. 50-53)
3 Letter Designator For 1 Device
Two 3 Letter Designators For 2 Different Devices
One 3 Letter Designator For 2 Of The Same Device
ArrowLink™ Connector Options(for more information see pgs. 54-55)
MCR = ArrowLink Connector, Receptacle/GFCIMCS = ArrowLink Connector, Single-Pole Switch
11
12
1 32 4 5 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12 6 7 8 9 8 10 8 11 12
Position 1 Opening (if desired) Position 2 Opening (if desired) Position 3 Opening (if desired) Position Opening 4 (if desired)(on BB824 only)
Step 1 Step 2 Step 3 Step 2 Step 3 Step 2 Step 3 Step 2 Step 3
BB716 - 10 4D _ _ - X _ _ _ _ _ _ _ _ - 2 _ _ _ _ _ _ P KAV - X _ _ _ _ _ _ _ _ - _ _ _ _ _ _ _ _ _ •• Example Part Number from page 22
Basic Ruff-IN™ = 3-5 day lead-time for quantities of 1000 or less.Ruff-IN with Wiring Devices = 10-15 day lead-time for quantities of 500 or less.Non Stock Components = Call factory for lead-time.
Ruff-IN
† Marks shown are property of respective owners.
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
24
Conduit & Box Support Fasteners
BG812-S18W2-4DN
Features
• Riveted assembly secures electrical boxes and conduit/cableruns on either side of the box.
• Assemblies available with bat wing or beam fasteners forsimple installation.
• New BMC3 plate is available to support multiple conduitruns on either side of the box.
• New “X” configuration available as a Ruff-IN™ Pre-Fabassembly and provides cable/conduit support from allknockouts.
• Download the Ruff-IN configurator for free atwww.cooperbline.com/ruff-in and see for yourself howmuch easier it allows you to create Ruff-IN part numbers.
BRC51-S18-4DN •• BG812-S18W2MC3-4DN
Components that can be assembled:
Conduit/Cable Clamp Options Spanner Bar Options Support Clip Options Multiple Conduit Plate Option
BG Series
BP Series
BRC5 Series
S18
S18X with BW2 Support Clip
BW2 / BW6 MC3
BU24 / BU58
1 2 3 4
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
25
Conduit & Box Support Fasteners
1 32 4 5 6 7 8
† Example Part Number from page 24
BG812 - S18 W2 MC3 - _ _ 4D N
* One device adjustable plasterrings are set at 3/4” raise and canbe adjusted to 11/2” raise.
Two device adjustable plaster ringsare set at 5/8” raise and can beadjusted to 11/2” raise.
Adjustable plaster ring can onlybe used on 4” sq. - 21/8” deepboxes.
Basic Ruff-IN™ = 3-5 day lead-time for quantitiesof 1000 or less.
Non Stock Components = Call factory for lead-time.
Conduit/Cable Clamp
BG6 = 3/8” conduit or MC/AC cableBG812 = 1/2” or 3/4” ConduitBG16 = 1” ConduitBP8 = 1/2” EMTBP12 = 3/4” EMTBP16 = 1” EMTBRC51 = up to 4 Runs of
Cable Diameter .43” - .56”BRC53 = up to 7 Runs of
Cable Diameter .56” - .69”
Spanner Bar
S18 = Single Combo BarS18X - Double Combo Bar
Support Clip
W2 = Bat Wing for #12 - 1/4” RodW6 = Bat Wing for 3/8” RodU24 = Hammer on Beam Clamp
for 1/8” - 1/4” FlangeU58 = Hammer on Beam Clamp
for 5/16” - 1/2” Flange
Multiple Conduit Plate
MC3 = Multiple Conduit Plate
Plaster Ring Style(see pg. 47)
1 = One Device2 = Two DeviceR = Round1AJ = One Device Adjustable *2AJ = Two Device Adjustable *Blank = Box Only
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Box Only or Adjustable Plaster Ring
Box Style (see pg. 48)
2 = 4” Octagon, 11/2” Deep ***2D = 4” Octagon, 21/8” Deep ***4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO5 = 411/16” Sq., 11/2” Deep554 = 411/16” Sq., 21/8” Deep, 3/4” KO
Ground Wire
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
1 6
5
2
3
4
7
8
*** - Octagon box options are only available on those configurations where a plaster ring does not exist.
BP8-S18X-W2-MC3-4N
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
26
Electrical Box T-Bar FastenersFeatures
• Preassembled T-Bar fasteners speed installation.
• Boxes have 1/2” and 3/4” knockouts.
• BA50 & BA50D loading not to exceed 50 lbs. without independentsupport. BA50A loading not to exceed 25 lbs. without independent support.
• Download the Ruff-IN™ configurator for free atwww.cooperbline.com/ruff-in and see for yourself howmuch easier it allows you to create Ruff-IN part numbers.
• Now available in any configuration as a Ruff-IN assembly.
• Preassembled T-Bar fasteners speed installation.
• BA50A adjusts to accommodate heights from 11/2” to 83/4”.
• BA5024D & BA5034D include BA50E extender brackets.
UPC/PartNumber DescriptionCatalog
NumberBoxQty
781011 96490 BA50 Box Hanger 25
781011 96491 BA50D Box Hanger for Box 25with 11/2” Extension
782051 18460 BA50A Adjustable Box 10Hanger for T-Bar
BA5024 BA5034 BA5024D
BA5034D BA50A
11/2” 21/8”3”
35/8”11/2” to 83/4”
BA50
BA50D
BA50A
Electrical Box T-Bar Fastener Assemblies
Features
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
27
Electrical Box T-Bar Fastener Assemblies
BA50A-4N
•• BA5024D-4N
* One device adjustable plasterrings are set at 3/4” raise and canbe adjusted to 11/2” raise.
Two device adjustable plaster ringsare set at 5/8” raise and can beadjusted to 11/2” raise.
Adjustable plaster ring can onlybe used on 4” sq. - 21/8” deepboxes.
Basic Ruff-IN™ = 3-5 day lead-time for quantities of 1000 or less.
Non Stock Components = Call factory for lead-time.
1 2 3 4 5
BA50 24D - __ __ 4 N•• Example Part Number
Bracket Type
24 = BA50 Bar at 11/2” Depth34 = BA50 Bar at 21/8” Depth24D = BA50 Bar at 3” Depth **34D = BA50 Bar at 35/8” Depth **A = BA50A Adjustable Support
Plaster Ring Style(see pg. 47)
1 = One Device2 = Two DeviceR = Round1AJ = One Device Adjustable *2AJ = Two Device Adjustable *Blank = Box Only
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Box Only or Adjustable Plaster Ring
Box Style (see pg. 48)
2 = 4” Octagon, 11/2” Deep ***2D = 4” Octagon, 21/8” Deep ***4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO4 = 4” Sq., 11/2” Deep432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO5 = 411/16” Sq., 11/2” Deep554 = 411/16” Sq., 21/8” Deep, 3/4” KO
Ground Wire
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
1 4
2
3
5
** - Assembly includes 4” square box, 11/2” extension ring, TP428, and BA50E extension brackets.*** - Octagon box options are only available on those configurations where a plaster ring does not exist.
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
28
Fan/Fixture Hanger Assembly
BA50FBoxed
BA50F withKwikWiresupport
Features
• Preassembled fan/fixture hanger installs on T-Bar in less than30 seconds.
• Positions and secures ceiling fans and light fixtures insuspended ceilings.
• Includes KwikWire™ cable and clamps which attach tomounting clips for easy installation.
• UL Listed for fan support up to 70 lbs.Fixture support up to 90 lbs. 35 lbs in Canada.
• Finish: Pre-galvanized.• Download the Ruff-IN™ configurator for free at
www.cooperbline.com/ruff-in and see for yourself howmuch easier it allows you to create Ruff-IN part numbers.
UPC/PartNumber Description Box
QtyCatalogNumber
781011 96492 BA50F Fan/Fixture Hanger 1Includes 4” x 11/2”deep octagon box
9.25”
24”
Basic Ruff-IN = 3-5 day lead-time for quantities of 1000 or less.
Ruff-IN
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
29
Plaster Rings With Wiring DevicesFeatures
• Creates an alternate installation method by allowingfor the plaster ring and wiring device to be addedafter the bracket and box have been installed.
• Plaster ring sizes available in 1/4”, 1/2”, 5/8”, 3/4”, 1”,11/4”, 11/2”, 2”, and an adjustable plaster ring.
• Over 95 cataloged wiring devices available.• All assemblies include a cover plate.
• Download the Ruff-IN™ configurator for free atwww.cooperbline.com/ruff-in and see for yourself howmuch easier it allows you to create Ruff-IN part numbers.
1 2 3 4 5 6
Ground Wire(Pre-installed devices require stranded wire)A = Stranded Ground Wire
Wire ConfigurationT = Device With Bare Wire Leads, No ConnectorsZ = Device With Bare Wire Leads and Wago®†
Push Connectors
Device Type see pg. 50-53)
3 Letter Designator For 1 DeviceTwo 3 Letter Designators For 2 Different DevicesOne 3 Letter Designator For 2 of the Same Device
Stud Depth4 = Plaster Ring For 4” Sq. Box5 = Plaster Ring For 411/16” Sq. Box
Plaster Ring Style (see pg. 47)
1 = One Device2 = Two Device1AJ = One Device Adjustable *2AJ = Two Device Adjustable *
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Adjustable Plaster Ring
1
2
3
4
5
6
BMR 4 - 1 10 A - T DFV•• Example Part Number
* One device adjustable plaster rings are set at 3/4”raise and can be adjusted to 11/2” raise.
Two device adjustable plaster rings are set at 5/8”raise and can be adjusted to 11/2” raise.
Adjustable plaster ring can only be used on 4” sq. -21/8” deep boxes.
Basic Ruff-IN = 3-5 day lead-time for quantities of 1000 or less.Ruff-IN with Wiring Devices = 10-15 day lead-time for quantities of 500 or less.Non Stock Components = Call factory for lead-time.
BMR4-110A-TAAR
BMR4-110A-ZDFV
•• BMR4-110A-TDFV
Ruff-IN
† Marks shown are property of respective owners.
30
Ruff-IN
31
Ruff-IN™ MC CableSolutions
Ruff-IN
MC Cab
le Solutio
ns
Cooper B-Line introduces TOTAL Ruff-IN™
The new standard for Engineered Total Solution offerings
Step 1: Send Engineering Drawingsto Cooper B-Line
Options to send in drawings
Option 1:Email drawings (File size limit is 10meg)Email to: [email protected]\
Option 2:Load drawings on Cooper B-Line FTP SiteSecured log-in information available upon requestfrom your local Cooper B-Line Sales Representative
TOTAL Ruff-IN Features• UL Approved pre-fab assemblies• Team of engineers prepared to interpret engineering drawings• Detailed assembly and room drawings• Room-by-room labeling and packaging
Total Ruff-IN is a service that incorporates engineering drawings into a room-by-room pre-fab system.Once your shipment is received, simply review the detailed room layout to see exactly where eachassembly and whip should be installed.The entire process, including the project quotation, manufacturing process, and shipping is designed tomeet or exceed industry leading lead times (see Lead Times posted page 3).
32
Introduction / Step 1 - Send In DrawingsRuff-IN M
C Cab
le Solutions
Step 2: Project Questionnaire
After engineering drawings have been received and reviewed, a ProjectQuestionnaire spreadsheet (listed below) will be sent out to gatherspecific information that is needed for your Total Ruff-IN™ quotation.
Ruff-IN Project QuestionnaireJob Name: . . . . . . . . . . . . . . . . . .
Purpose of quotation: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bid Buy
Can branches be routed through ceiling? . . . . . . . . . . . . . . . . . . . . . . . . Yes No
Contact Person(s) . . . . . . . . . . . .
Phone# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Projected date for product needed on jobsite: . . . . . . . . . . .
Interior Wall Depths (21/2”, 31/2”, 4”, 6”, other) . . . . . . . . . . . . .
Ceiling Height (9’-0”, 9’-6”, 10’-0”, other) . . . . . . . . . . . . . . . . .
MC Cable Type (standard, hospital, all-purpose) . . . . . . . . . . . .
MC Cable . . . . . . . No Whips Whips attached to assembly Whips shipped separate
Plaster Ring Depth(s): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bracket(s) for device w/wall height below 24” . . . . . . . . . . . .
Exact device height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bracket(s) for device w/wall height above 24” . . . . . . . . . . . .
Box Size (furnished with 21/2” deep boxes) . . . . . . . . . . . . . . . . . . . . .4” square 5” square
Internal connector (wago, wire nut, other) . . . . . . . . . . . . . . . .
Circuits can or cannot share neutral wires? . . . . . . . . . . . .
Device Style(s) (Standard, Decorative) . . . . . . . . . . . . . . . . . . .
Device Grade (Construction, Commercial, Industrial, Hospital) .
Device Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ground Up Ground Down
Device Color (Ivory, White, Light Almond, Almond, other) . . . . .
Standard Takeoff includes provisions for receptacles, switches, GFCI, and data boxes.What other applications should be included in the quote?
Does drawing include proper scale and reference? . . . . . . . . . . . . . . . . Yes No
Include Special Instructions Below:
* An electronic copy of the Ruff-IN Project Questionnaire is available @ www.cooperbline.com/Ruff-IN
33
Step 2 - Project QuestionnaireRuff-IN
MC Cab
le Solutio
ns
34
Step 3 - Quotation Package
Step 3: Quotation Package
Once the scope of the project is defined, a quotation package will be sentout with the following contents:
1) Project Quote
Each line item on thequote will includethe devicesymbol as wellas a detaileddescription.
Every quote willinclude a total ofMC cable used foryour project.
2) Scope of Project –Summary that explains how we have interpreted the provided engineering drawings for theproject as well as an explanation of terms and conditions that are specific to your project.
3) Assembly Drawings –Detailed assembly drawings for each line item quoted.(Assembly Drawings will not include MC cable)
Version 1.1 has been released....Additions to this update include theCroc-Lok and BBFFloor-MountBracket.
To download the updated version, visit cooperbline.com/Ruff-IN
Ruff-IN M
C Cab
le Solutions
35
Step 4 - Approval Package
Step 4: Approval Package
Before a pre-fab order can be accepted, the contents of the approval package must bereviewed and approved by the contractor. The approval form displayed below contains allrequired contractor sign-off and signature requests for the project:
A) Ship date approval• Customers can choose from a single ship date, or a schedule of multiple ship dates
for tour project.
B) Project Scope approval• The initial draft of the Project Scope, which contains all terms and conditions specific
to your project, is sent out with the quotation package for review. The ‘Initial forApproval Request’ secures the final draft of the Project Scope.
C) Assembly Drawings approval• All assembly drawings are emailed out for review with the quotation package. The
request for approval signifies that no further changes to the assemblies on theproject are needed.
D) Room Drawings approval (see page 36 for details)• Upon receipt of purchase order, detailed room drawings will be emailed explaining the
location of each pre-fab assembly and mc cable whip for each specific room on aproject. The request for approval signifies that the contractor is in agreement witheach room drawing.
A)
B)
C)
D)
Ruff-IN
MC Cab
le Solutio
ns
Ruff-IN Contractor Review Sheet (PF-APPROVALFORM-RUFFIN)
Job Name:
Shipdate for Complete Order
CONTRACTOR SIGNATURE OF APPROVAL FOR ASSEMBLY DRAWINGS
I certify the assembly drawings and other quantities presented on _____________ have been reviewed and are correct.I am aware that any changes requested and/or made to these drawings could change the project price and lead time.
I certify the room drawings detailing assembly and whip location within each room that are presented on ___________have been reviewed and are correct. I am aware that any changes requested and/or made to these drawings could changethe project price and lead time.
CONTRACTOR SIGNATURE OF APPROVAL FOR ROOM DRAWINGS
CONTRACTOR SUGGESTED DATE
Project Scope
Initial for Approval
* Fax this sheet to (618-654-9191, ATTN: Ruff-IN* Email approval to [email protected] is also acceptable
Initial for Approval
Contractor Name Contractor Signature
Contractor Name Contractor Signature
Attachment:
(For multiple shipdate option see page 2)
PO #:B-Line Order #:
36
Room Drawing Explanation
P All room drawings list the:1) Jobsite name2) Quote #3) Room #
P All pre-fab assemblies and MC Cable whips includedin the room drawing contain a reference number that is also included on the label for the part and in theroom drawing legend.
P The room drawing legend links each pre-fabassembly within the appropriate MC cablewhip within the room.
P Initial room drawings that are emailedwill read 'Issued for Approval'. Drawings that are received with theshipment of assemblies will read ‘Issued For Manufacturing'.
Ruff-IN M
C Cab
le Solutions
37
Labeling & Packaging
Total Ruff-IN™ orders are packaged and shipped by room. Box labels and assemblylabels, which are pictured and explained below, are provided for every box and assemblythat is included in the order.
Box Labeling & Packaging –
� Each box label contains:• Room Number• Box Number• Purchase Order Number
Assembly Labels –
� Each assembly will contain a label that includes:• Part Number• UL Identification• Device Description (ex. Receptacle, White)• Assembly number that corresponds with room drawing
WIRING ASSEMBLY - 24RYBB216TCL-1104DA-LSP-CDFW-2M15Receptacle, White, MCIG, 15 ft.‘Room 2A, Assembly #1’
Ruff-IN
MC Cab
le Solutio
ns
38
Ruff-IN™ Assemblies with MC Cable - Option 1
BB216TS •• BB2CL-1104DA-LSP215-ADFV
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
BB216TCLBB2CL
Ruff-IN Assemblies with MC Cable - Part Numbering Option 1
Bracket OptionsTelescoping Bracket w/Croc-Lok
Telescoping Bracket w/Slider Bracket
Double-Sided Bracket
Floor-Mount Bracket
Bracket Type
� BB216TCL - 16” Telescoping bracket with Croc-Lok bracket� BB224TCL - 24” Telescoping bracket with Croc-Lok bracket� BB2CL - Croc-Lok bracket only
1
Bracket Type
� BB216TS - 16” Telescoping Slider Bracket � BB224TS - 24” Telescoping Slider Bracket
1
Bracket Type
� BBF15 - 15” Floor Mount Bracket� BBF15C - 15” Floor Mount Bracket with Cable Containment� BBF18 - 18” Floor Mount Bracket� BBF18C - 18” Floor Mount Bracket with Cable Containment� BBF24 - 24” Floor Mount Bracket� BBF24C - 24” Floor Mount Bracket with Cable Containment
1
Bracket Type
� BB73 - Double Sided Bracket for 31/2” & 21/2”� BB74 - Double Sided Bracket for 4”, 31/2” & 21/2”� BB76 - Double Sided Bracket for 6”, 51/2”, 31/2” & 21/2”
1
BBF18
BBFxxC
BB74shown
Ruff-IN M
C Cab
le Solutions
39
Ruff-IN™ Assemblies with MC Cable - Option 1
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
1 32 4 5 6 7 8 9 10 11 12 13 8 9 10 11 12 8 9 10 11 12 15 1614
Step 1 Step 2 Step 3
BB2CL - 1 10 4D A _ - L S P 2 _ 15 _ _ _ _ _ _ _ _ _ _ _ _ - A DFV
For Installation Of One Box
•• Example Part Number shown on page 38
Step 1 - Basic
Bracket Type
See Page 38
Plaster Ring Style (see pg. 47)
1 = One Device2 = One DeviceR = Round1AJ = One Device Adjustable ∆2AJ = Two Device Adjustable ∆Blank = Box Only
Plaster Ring Size
04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” RaiseBlank = Box Only orAdjustable Plaster Ring
Box Style (see pg. 48)
4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO554 = 411/16” Sq., 21/8” Deep, 3/4” KOBlank = Plaster Ring Only
Ground Wire(Pre-installed devices require stranded wire)
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad see pg. 45)
Blank = No PadF = Pad Installed
Step 2 - Connectors/MC Cable
Left KO
L = Include ConnectorBlank = No Connector
Connector Orientation
Blank = Whip Not Attached To Box,Attach Connectors To Box
T = Whip Should Be Attached To Box,No Connector On Opposite End
S = Whip Should Be Attached To BoxWith Additional Connector OnOpposite End Of Cable
Left KO Connector Type (see pg. 49)
P = 1/2” ArlingtonQ = 3/4” Arlington
Number of MC CablePhase Connectors
2 = 2 Connectors3 = 3 Connectors4 = 4 Connectors
MC Cable Type
Blank = StandardP = Isolated Ground (All-Purpose)H = Hospital
Cable Length (Sold in 5-ft.Increments Only)
5 = 5-Feet in Length10 = 10-Feet in Length15 = 15-Feet in Length20 = 20-Feet in Length25 = 25-Feet in Length
Middle KO
M = Include ConnectorBlank = No Connector
Right KO
R = Right ConnectorBlank = No Connector
1
2
4
9
10
11
12
13
14
Step 3 - Wiring Devices/ArrowLink
Wiring ConfigurationA = Wires Contained Inside Box w/Wago®†Connectors (all receptacles installed w/ground up)*
A1 = Wires Contained Inside Box w/Wago®†Connectors (all receptacles installed w/grounddown)*
B = Bare Wires Contained Inside Box w/WireNut Connectors (all receptacles installedw/ground up)*
B1 = Bare Wires Contained Inside Box w/WireNut Connectors (all receptacles installedw/ground down)*
C = Wires Extending From Right KO w/Wago®†Connectors (all receptacles installed w/ground up)*
C1 = Wires Extending From Right KO w/Wago®†Connectors (all receptacles installed w/grounddown)*
D = Bare Wires Extending From Right KO w/WireNut Connectors (all receptacles installed w/groundup)*
D1 = Bare Wires Extending From Right KO w/WireNut Connectors (all receptacles installed w/grounddown)*
* When Isolated Ground (MCAP) cable is selected, this wiring assembly does notinclude ground wires.
Device Type or ArrowLink Connector
See pages 50-53 for device or ArrowLink™ options.
15
16
3
5
7
8
6
*Consult with your Cooper B-Line representative for availableoptions to add an additional box to an assembly.
∆ One device adjustable plasterrings are set at 3/4” raise and canbe adjusted to 11/2” raise.
Two device adjustable plaster ringsare set at 5/8” raise and can beadjusted to 11/2” raise.
Adjustable plaster ring can onlybe used on 4” sq. - 21/8” deepboxes.
Ruff-IN
MC Cab
le Solutio
ns
† Marks shown are property of respective owners.
40
Ruff-IN™ Assemblies with MC Cable - Option 2
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
Ruff-IN Assemblies with MC Cable - Part Numbering Option 2
Bracket OptionsMultiple Box Mounting Bracket
Open Box Support Bracket
Bracket Type
� BB816 - 16” Multiple Box Mounting Bracket• Three (3) Box Mounting Slots
� BB824 - 16” Multiple Box Mounting Bracket• Four (4) Box Mounting Slots
� Download the Ruff-IN configurator for free atwww.cooperbline.com/ruff-in and see for yourselfhow much easier it allows you to create Ruff-INpart numbers.
1
Bracket Type
� BB716 - 16” Open Box Support Bracket• Holds up to three (3) boxes
� BB724 - 16” Open Box Support Bracket• Holds up to four (4) boxes
� Download the Ruff-IN configurator for free atwww.cooperbline.com/ruff-in and see for yourselfhow much easier it allows you to create Ruff-INpart numbers.
1
BB8-16
BB8-24
•• BB816-104DA-1LSPH215-CDFW-X
BB7-16
BB7-24
Ruff-IN M
C Cab
le Solutions
41
Ruff-IN Assemblies with MC Cable - Option 2
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
Step 1 - Basic
Bracket TypeSee Page 40
Plaster Ring Size04 = 1/4” Raise08 = 1/2” Raise10 = 5/8” Raise12 = 3/4” Raise16 = 1” Raise20 = 11/4” Raise24 = 11/2” Raise32 = 2” Raise
Box Style (see pg. 48)4D = 4” Sq., 21/8” Deep436 = 4” Sq., 21/8” Deep, 1” KO432 = 4” Sq., 21/8” Deep, 3/4” KO5D = 411/16” Sq., 21/8” Deep560 = 411/16” Sq., 21/8” Deep, 1” KO554 = 411/16” Sq., 21/8” Deep, 3/4” KO431 = 4” Sq., 21/8” Deep, Int. MC ConnectorsBlank = Plaster Ring Only
Ground Wire(Pre-installed devices require stranded wire)
Blank = Solid Ground WireA = Stranded Ground WireN = No Ground Wire
Firestop Pad (see pg. 45)
Blank = No PadF = Pad Installed
Step 2 - Connectors/MC Cable
Position1 = One Device and Box2 = Two Device and BoxJ = One Device Adjustable Ring & Box ∆3 = One Device Plaster Ring Only4 = Two Device Plaster Ring Only5 = Box OnlyR = Round Plaster Ring and Box6 = One Device and Box, No Ground Wire7 = Two Device and Box, No Ground Wire8 = Round Plaster Ring and Box,
No Ground WireK = Adjustable Plaster Ring and Box,
No Ground Wire ∆9 = Box Only, No Ground WireX = No Attachments
Step 2 - Connectors/MC Cable
Left KO
L = Include ConnectorBlank = No Connector
Connector Orientation
Blank = Whip Not Attached To Box,Attach Connectors To Box
T = Whip Should Be Attached To Box,No Connector On Opposite End
S = Whip Should Be Attached To BoxWith Additional Connector OnOpposite End Of Cable
Left KO Connector Type (see pg. 49)
P = 1/2” Arlington 38 ASTQ = 3/4” Arlington 40 AST
MC Cable Type
Blank = StandardP = Isolated Ground (All-Purpose)H = Hospital
Number of MC CablePhase Connectors
2 = 2 Connectors3 = 3 Connectors4 = 4 Connectors
MC Cable Length (Sold in 5-ft.Increments Only)
5 = 5-Feet in Length10 = 10-Feet in Length15 = 15-Feet in Length20 = 20-Feet in Length25 = 25-Feet in Length
Middle KO
M = Include ConnectorBlank = No Connector
Right KO
R = Right ConnectorBlank = No Connector
1
2
4
9
10
11
12
13
14
Step 3 - Wiring Devices/ArrowLink
Wiring ConfigurationA = Wires Contained Inside Box w/Wago®†Connectors (all receptacles installed w/ground up)*
A1 = Wires Contained Inside Box w/Wago ®†Connectors (all receptacles installed w/grounddown)*
B = Bare Wires Contained Inside Box w/WireNut Connectors (all receptacles installedw/ground up)*
B1 = Bare Wires Contained Inside Box w/WireNut Connectors (all receptacles installedw/ground down)*
C = Wires Extending From Right KO w/Wago®†Connectors (all receptacles installed w/ground up)*
C1 = Wires Extending From Right KO w/Wago®†Connectors (all receptacles installed w/grounddown)*
D = Bare Wires Extending From Right KO w/WireNut Connectors (all receptacles installed w/groundup)*
D1 = Bare Wires Extending From Right KO w/WireNut Connectors (all receptacles installed w/grounddown)*
* When Isolated Ground (MCAP) cable is selected, this wiring assembly does notinclude ground wires.
Device Type or ArrowLink Connector
See pages 50-53 for device or ArrowLink™ options.
15
16
3
5
7
8
6
1 32 4 5 6 7 8 9 10 11 12 13 11 12 11 12 15 1614 6 7 8 9 10 11 12 13 11 12 11 12 15 1614
Step 1 Step 2 Step 3
BB816 - 10 4D A _ - X _ _ _ _ _ _ _ _ _ _ _ _ - _ ___ - 1 L S P H 2 15 _ _ _ _ _ _ - C DFW - X
Position Opening One (If Desired)Step 2 Step 3Position Opening One (If Desired)
•• Example Part Number shown on page 40
*Consult with your B-Line representative if assemblyrequires a box in position opening three or four.
∆ Adjustable plaster rings cannot be used on the Open Box Support Bracket.One device adjustable plasterrings are set at 3/4” raise and canbe adjusted to 11/2” raise.
Two device adjustable plaster ringsare set at 5/8” raise and can beadjusted to 11/2” raise.
Adjustable plaster ring can onlybe used on 4” sq. - 21/8” deepboxes.
Ruff-IN
MC Cable S
olutio
ns
† Marks shown are property of respective owners.
42
MC Cable Whips
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
� Available in 5 foot increments from 5 ft. to 25 ft.� Stand alone cable whips can be ordered:
• With connectors on both ends• With connectors on one end• Without connectors
� The sheath on all wire ends is pre-cut and stripped back 1/2” (see below).
Standard MC Cable
Cut To Length MC Cable Whips
BCW12-2-BP-15
71/2” Wire Sheath
1/2” Exposed Wire
Hospital Grade MC Cable
BCW12-2H-BP-15
Isolated Ground MC Cable
•• BCW12-2P-BP-15
Ruff-IN MC Cable Solutions
43
MC Cable Whips
Wire Gauge
12 = 12 Gauge wire14 = 14 Gauge wire
Number of Conductors
2 = 2 Conductors3 = 3 Conductors4 = 4 Conductors
Cable Type
Blank = StandardP = Isolated ground (all-purpose)H = Hospital
Conductor Type
Blank = SolidA = Stranded
2
1
3
4
Wire End Orientation
Blank = Bare-endsC = Connector on one endB = Connector on both ends
Connector Type (see pg. 49)
P = 1/2” Arlington 38 ASTQ = 3/4” Arlington 40 AST
Cable Length
5 = 5-feet in length10 = 10-feet in length15 = 15-feet in length20 = 20-feet in length25 = 25-feet in length
5
6
7
321 4 5 6 7
BCW _ _ - 2 P _ - B P - 15
Step 1
Step 1 - Basic Whip
•• Example Part Number shown on page 42
For more information on innovative Ruff-IN™ products andvaluable contractor sales tools visit cooperbline.com/ruff-in.
Ruff-IN™ Configurator Ruff-IN™ Quick-Ship Program Ruff-IN™ Labor Savings Calculator
Ruff-IN
MC Cable S
olutio
ns
Accessories
44
Accessories
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
45
Firestop PadsAccesso
ries
• SpecSeal®† Power Shield electrical box inserts are used to protectan electrical box and maintain fire-resistance ratings of wallassemblies when the horizontal separation between metallicboxes on opposite sides of the wall is less than 24”.
• The intumescent insert is designed to install inside the box,directly against the back wall.
• SpecSeal®† Power Shield expands a minimum of 24 times its original size, when exposed to high temperatures or flames, to quickly seal off the passage of fire and smoke.
• Simple to install. SpecSeal®† Power Shields are sized to fit typicaloutlet boxes and feature an adhesive strip on the back of the padto ensure adhesion to the back of the electrical box. Installsquickly with no mess/residue.
• The low profile design maximizes the area inside the electrical box.
• Water resistant - no soluble or hygroscopic ingredients.
Properties Electrical Box Inserts
Color: Red
Weight: EP44 - 0.08 lbs. (0.036 kg)EP45 - 0.10 lbs. (0.045 kg)
Volume: EP44 - 1.75 cu in. (28.8 cu cm.)EP45 - 2.50 cu in. (41.0 cu cm.)
Expansion Begins: 350°F (177°C)
Expansion Range: 350°F to >1000°F (177°C - 537°C)
Volume Expansion: 16 to 24X (free expansion)
In Service Temperature: <130°F (54°C)
Oven Aging: No Change (60°C)*
Humidity Exposure: No Change (60°C, 98% R.H.)*
Shelf Life: No Limit
STC Rating: 64
* Evaluation of physical properties and total expansion.
UPC/PartNumber Size & DescriptionCatalog
NumberBoxQty
782051 49195 EP44 33/4” x 33/4” x 1/8” for 4” Square Box 20
782051 49196 EP45 41/2” x 41/2” x 1/8” for 411/16” Square Box 20
Features
Basic Ruff-IN = 3-5 day lead-time forquantities of 1000 or less.† Marks shown are property of respective owners.
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
46
Metal Protector PlatesAccessories
BPR2BPR1
BPS1
BPS2
UPC/PartNumber Devices Plaster
Ring StyleCatalogNumber
BoxQty
782051 49197 BPR1 Receptacles, GFCI, Decorator, None One Device 50782051 38937 BPS1 Toggle Switches One Device 50
782051 49199 BPR2 Receptacles, GFCI, Decorator, None Two Device 50782051 38938 BPS2 Toggle Switches Two Device 50
Features
• Protects box contents from drywall mud, paint and debris.
• Protector plates provided with all wiring device assemblies.
• Can be installed on plaster rings with or without pre-installed wiring devices.
• Protects pre-installed wiring devices from damage duringdrywall installation.
• Improved design transmits force of drywall installation tothe plaster ring - not the wiring device.
• Domed plate for toggle switches allows for clearancebetween the plate and switch, and eliminates scratchingof the devices.
• Two protector plates are required for two device plasterrings.
Basic Ruff-IN™ = 3-5 day lead-time for quantities of 1000 or less.
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
47
Adjustable & Standard Plaster Rings
Stock Components
Non Stock Components
Accesso
ries
UPC/PartNumber Description DepthCatalog
NumberRuff-InCode
BoxQty
782051 49200 B1AJ One Device Adjustable Ring 3/4” - 11/2” 25 1AJ
782051 49201 B2AJ Two Device Adjustable Ring 5/8” - 11/2” 25 2AJ
782051 53426 B3AJ Three Device Adjustable Ring 3/4” - 11/2” 25 3AJ
782051 53427 BRAJ Round Device Adjustable Ring 3/4” - 11/2” 25 RAJ
• Adjustable plaster ring can be used with 4” square, 21/8” deep boxes and fits a range of drywall thicknesses.
• Single gang plaster ring can be used in combination with Cooper B-Line’s BB4-23 series, BB73 Series, BB8-16Series, BFM Series, and BB2-16 Series. It is provided with a 3/4” raise and can be adjusted to a 11/2” raise.
• Two gang plaster ring can be used in combination with Cooper B-Line’s BB2-16 Series and BB73 Series. It is provided with 5/8” raise and can be adjusted to a 11/2” raise.
• The plaster ring can be adjusted after sheet rock, mud, or tile is installed without removing the wiring devices.
Features
B1AJ B2AJ B3AJ
One Device Two Device Round
Plaster Rings
Plaster Ring One Device Two Device RoundSize Ruff-In Code Ruff-In Code Ruff-In Code
1/4” raise 104 204 R041/2” raise 108 208 R085/8” raise 110 210 R103/4” raise 112 212 R121” raise 116 216 R1611/4” raise 120 220 R2011/2” raise 124 224 R242” raise 132 232 R32
BRAJ
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
48
Electrical Boxes
Part Size Depth Capacity Side KO Bottom KO Ruff-InNumber Code
TP-403 4” Square 21/8” 30.3 in3 (8) 1/2”, (4) 1/2” & 3/4” E (2) 1/2”, (2) 1/2” & 3/4” E 4D
TP-436 4” Square 21/8” 30.3 in3 (8) 1” (2) 1/2”, (2) 1/2” & 3/4” E 436
TP-404 4” Square 11/2” 22.0 in3 (8) 1/2”, (4) 1/2” & 3/4” E (2) 1/2”, (2) 1/2” & 3/4” E 4
TP-432 4” Square 21/8” 30.3 in3 (8) 3/4” (2) 1/2”, (2) 1/2” & 3/4” E 432
TP-431 4” Square 21/8” 30.3 in3 (2) 1/2” & 3/4” E, (4) 1/2”, (4) cable (1) 1/2” 431
TP-563 411/16” Square 21/8” 42.0 in3 (6) 1/2”, (6) 1/2” & 3/4” E (3) 1/2”, (2) 3/4” 5D
TP-560 411/16” Square 21/8” 42.0 in3 (8) 1” (3) 1/2”, (2) 3/4” 560
TP-548 411/16” Square 11/2” 29.5 in3 (8) 1/2”, (4) 3/4” (3) 1/2”, (2) 3/4” 5
TP-554 411/16” Square 21/8” 42.0 in3 (8) 3/4” (3) 1/2”, (2) 3/4” 554
TP-403 TP-436
TP-563 TP-560
TP-548 TP-554
TP-404
TP-431
TP-432
Stock Components
Non Stock Components
Accessories
Read safety/installation instruction sheets in packages before use. These products are designed for positioning only. No load rating.
49
Cable & Conduit Connectors
QLK50S A 1/2” Single
QLK50D B 1/2” Duplex
QLK75S C 3/4” Single
QLK50S
QLK50D
QLK75S
SSBC50
SSBC75
SSBC100
MC Cable Connectors
Part Number Ruff-In Code Size
SSBC50 D 1/2”
SSBC75 E 3/4”
SSBC100 F 1”
EMT Conduit Connectors
Part Number Ruff-In Code Size
Stock Components
Non Stock Components
Accesso
ries
38AST P 1/2” Single
40AST Q 3/4” Single
38AST
40AST
MC Cable Connectors
Part Number Ruff-In Code Size
50
Reference Data - Wiring Devices
Standard DuplexReceptacles
Tamper ResistantDuplex Receptacles
Standard DuplexReceptacles
Tamper ResistantDuplex Receptacles
Item Description & Color Ruff-In StockStock Code Code
5252B Receptacle - 15 Amp Industrial Grade, Brown DAB5252V Receptacle - 15 Amp Industrial Grade, Ivory DAV5252W Receptacle - 15 Amp Industrial Grade, White DAW5262CB Receptacle - 15 Amp Industrial Grade, Brown DBB5262CV Receptacle - 15 Amp Industrial Grade, Ivory DBV5262CW Receptacle - 15 Amp Industrial Grade, White DBWIG5262RN Receptacle - 15 Amp Industrial Grade, Isolated Ground, Orange DGO5262B Receptacle - 15 Amp Industrial Grade, Brass Strap, Brown EAB5262V Receptacle - 15 Amp Industrial Grade, Brass Strap, Ivory EAV5262W Receptacle - 15 Amp Industrial Grade, Brass Strap, White EAWCR5262B Receptacle - 15 Amp Construction Spec. Grade, Brown KBBCR5262V Receptacle - 15 Amp Construction Spec. Grade, Ivory KBVCR5262W Receptacle - 15 Amp Construction Spec. Grade, White KBWBR15B Receptacle - 15 Amp Commercial Grade, Brown DEBBR15V Receptacle - 15 Amp Commercial Grade, Ivory DEVBR15W Receptacle - 15 Amp Commercial Grade, White DEW
5352B Receptacle - 20 Amp Industrial Grade, Brown DCB5352V Receptacle - 20 Amp Industrial Grade, Ivory DCV5352W Receptacle - 20 Amp Industrial Grade, White DCW5362CB Receptacle - 20 Amp Industrial Grade, Brown DDB5362CV Receptacle - 20 Amp Industrial Grade, Ivory DDV5362CW Receptacle - 20 Amp Industrial Grade, White DDWIG5362RN Receptacle - 20 Amp Industrial Grade, Isolated Ground, Orange DHO5362B Receptacle - 20 Amp Industrial Grade, Brass Strap, Brown EBB5362V Receptacle - 20 Amp Industrial Grade, Brass Strap, Ivory EBV5362W Receptacle - 20 Amp Industrial Grade, Brass Strap, White EBWCR5362B Receptacle - 20 Amp Construction Spec. Grade, Brown KABCR5362V Receptacle - 20 Amp Construction Spec. Grade, Ivory KAVCR5362W Receptacle - 20 Amp Construction Spec. Grade, White KAWBR20B Receptacle - 20 Amp Commercial Grade, Brown DFBBR20V Receptacle - 20 Amp Commercial Grade, Ivory DFVBR20W Receptacle - 20 Amp Commercial Grade, White DFW
5252Wshown
IG5362RNshown
8200B Receptacle - 15 Amp Hospital Grade, Nickel Plated Brass Strap, Brown FAB8200V Receptacle - 15 Amp Hospital Grade, Nickel Plated Brass Strap, Ivory FAV8200W Receptacle - 15 Amp Hospital Grade, Nickel Plated Brass Strap, White FAW8200HB Receptacle - 15 Amp Hospital Grade, Steel Strap, Brown FBB8200HV Receptacle - 15 Amp Hospital Grade, Steel Strap, Ivory FBV8200HW Receptacle - 15 Amp Hospital Grade, Steel Strap, White FBWIG8200RN Receptacle - 15 Amp Hospital Grade, Isolated Ground, Orange FFO
Hospital Grade DuplexReceptacles
15 Amp
TRBR15A Tamper Resistant Receptacle - Commercial Grade, Almond TAATRBR15B Tamper Resistant Receptacle - Commercial Grade, Brown TABTRBR15BK Tamper Resistant Receptacle - Commercial Grade, Black TAKTRBR15GY Tamper Resistant Receptacle - Commercial Grade, Gray TAGTRBR15L Tamper Resistant Receptacle - Commercial Grade, Light Almond TALTRBR15V Tamper Resistant Receptacle - Commercial Grade, Ivory TAVTRBR15W Tamper Resistant Receptacle - Commercial Grade, White TAW
15 Amp
TRBR20A Tamper Resistant Receptacle - Commercial Grade, Almond TBATRBR20B Tamper Resistant Receptacle - Commercial Grade, Brown TBBTRBR20BK Tamper Resistant Receptacle - Commercial Grade, Black TBKTRBR20GY Tamper Resistant Receptacle - Commercial Grade, Gray TBGTRBR20L Tamper Resistant Receptacle - Commercial Grade, Light Almond TBLTRBR20V Tamper Resistant Receptacle - Commercial Grade, Ivory TBVTRBR20W Tamper Resistant Receptacle - Commercial Grade, White TBW
20 Amp
20 Amp
15 Amp
20 Amp
8200Vshown
8300B Receptacle - 20 Amp Hospital Grade, Nickel Plated Brass Strap, Brown FCB8300V Receptacle - 20 Amp Hospital Grade, Nickel Plated Brass Strap, Ivory FCV8300W Receptacle - 20 Amp Hospital Grade, Nickel Plated Brass Strap, White FCW8300HB Receptacle - 20 Amp Hospital Grade, Steel Strap, Brown FDB8300HV Receptacle - 20 Amp Hospital Grade, Steel Strap, Ivory FDV8300HW Receptacle - 20 Amp Hospital Grade, Steel Strap, White FDWIG8300RN Receptacle - 20 Amp Hospital Grade, Isolated Ground, Orange FEO
8300HVshown
Stock Components
Non Stock Components
Accessories
51
Reference Data - Wiring Devices
6252Bshown
6352Wshown
DecoratorReceptacles
DecoratorReceptacles
Tamper ResistantDecoratorReceptacles
Item Description & Color Ruff-In StockStock Code Code
6252B Decorator Receptacle - 15 Amp Commercial Grade, Brown GAB6252V Decorator Receptacle - 15 Amp Commercial Grade, Ivory GAV6252W Decorator Receptacle - 15 Amp Commercial Grade, White GAW
15 Amp
6352B Decorator Receptacle - 20 Amp Commercial Grade, Brown GBB6352V Decorator Receptacle - 20 Amp Commercial Grade, Ivory GBV6352W Decorator Receptacle - 20 Amp Commercial Grade, White GBW
20 Amp
GFCI Receptacles
Tamper ResistantGFCI Receptacles
GFCI Receptacles
Tamper ResistantGFCI Receptacles
VGFH15B GFCI - 15 Amp Hospital Grade, Brown JABVGFH15V GFCI - 15 Amp Hospital Grade, Ivory JAVVGFH15W GFCI - 15 Amp Hospital Grade, White JAWVGF15B GFCI - 15 Amp Commercial Grade, Brown GCBVGF15V GFCI - 15 Amp Commercial Grade, Ivory GCVVGF15W GFCI - 15 Amp Commercial Grade, White GCW
VGFH20B GFCI - 20 Amp Hospital Grade, Brown JBBVGFH20V GFCI - 20 Amp Hospital Grade, Ivory JBVVGFH20W GFCI - 20 Amp Hospital Grade, White JBWVGF20B GFCI - 20 Amp Commercial Grade, Brown GDBVGF20V GFCI - 20 Amp Commercial Grade, Ivory GDVVGF20W GFCI - 20 Amp Commercial Grade, White GDW
VFG15Wshown
VGF20Wshown
15 Amp
TR6352A Commercial Grade, Almond TCATR6352B Commercial Grade, Brown TCBTR6352BK Commercial Grade, Black TCKTR6352GY Commercial Grade, Gray TCGTR6352LA Commercial Grade, Light Almond TCLTR6352V Commercial Grade, Ivory TCVTR6352W Commercial Grade, White TCW
20 Amp
20 Amp
Stock Components
Non Stock Components
TRVG15A Tamper Resistant - GFCI - Commercial Grade, Almond TGATRVG15B Tamper Resistant - Commercial Grade, Brown TGBTRVG15BK Tamper Resistant - Commercial Grade, Black TGKTRVG15GY Tamper Resistant - Commercial Grade, Gray TGGTRVG15LA Tamper Resistant - Commercial Grade, Lt Almond TGLTRVG15V Tamper Resistant - Commercial Grade, Ivory TGVTRVG15W Tamper Resistant - GFCI - Commercial Grade, White TGW
15 Amp
TRVG20A Tamper Resistant - GFCI - Commercial Grade, Almond THATRVG20B Tamper Resistant - GFCI - Commercial Grade, Brown THBTRVG20BK Tamper Resistant - GFCI - Commercial Grade, Black THKTRVG20GY Tamper Resistant - GFCI - Commercial Grade, Gray THGTRVG20LA Tamper Resistant - GFCI - Commercial Grade, Lt Almond THLTRVG20V Tamper Resistant - GFCI - Commercial Grade, Ivory THVTRVG20W Tamper Resistant - GFCI - Commercial Grade, White THW
20 Amp
Accesso
ries
52
Reference Data - Wiring Devices
Toggle Switches
Item Description & Color Ruff-In StockStock Code Code
2221B Single Pole Toggle Switch - 20 Amp Industrial Grade, Brown AAB2221V Single Pole Toggle Switch - 20 Amp Industrial Grade, Ivory AAV2221W Single Pole Toggle Switch - 20 Amp Industrial Grade, White AAW2222B Double Pole Toggle Switch - 20 Amp Industrial Grade, Brown AGB2222GY Double Pole Toggle Switch - 20 Amp Industrial Grade, Gray AGG2222RD Double Pole Toggle Switch - 20 Amp Industrial Grade, Red AGR2222V Double Pole Toggle Switch - 20 Amp Industrial Grade, Ivory AGV2222W Double Pole Toggle Switch - 20 Amp Industrial Grade, White AGWCSB120B Single Pole Toggle Switch - 20 Amp Commercial Grade, Brown BABCSB120V Single Pole Toggle Switch - 20 Amp Commercial Grade, Ivory BAVCSB120W Single Pole Toggle Switch - 20 Amp Commercial Grade, White BAWCSB220B Double Pole Toggle Switch - 20 Amp Commercial Grade, Brown BHBCSB220GY Double Pole Toggle Switch - 20 Amp Commercial Grade, Gray BHGCSB220V Double Pole Toggle Switch - 20 Amp Commercial Grade, Ivory BHVCSB220W Double Pole Toggle Switch - 20 Amp Commercial Grade, White BHW2223B 3 Way Toggle Switch - 20 Amp Industrial Grade, Brown ABB2223V 3 Way Toggle Switch - 20 Amp Industrial Grade, Ivory ABV2223W 3 Way Toggle Switch - 20 Amp Industrial Grade, White ABWCSB320B 3 Way Toggle Switch - 20 Amp Commercial Grade, Brown BBBCSB320V 3 Way Toggle Switch - 20 Amp Commercial Grade, Ivory BBVCSB320W 3 Way Toggle Switch - 20 Amp Commercial Grade, White BBW
CSB115Bshown
2221Wshown
Decorator Switches 15 Amp
20 Amp
15 Amp
20 Amp
7601Vshown
7621Bshown
Stock Components
Non Stock Components
1201B Single Pole Toggle Switch - 15 Amp Industrial Grade, Brown ADB1201V Single Pole Toggle Switch - 15 Amp Industrial Grade, Ivory ADV1201W Single Pole Toggle Switch - 15 Amp Industrial Grade, White ADW1202B Double Pole Toggle Switch - 15 Amp Industrial Grade, Brown AHB1202GY Double Pole Toggle Switch - 15 Amp Industrial Grade, Gray AHG1202V Double Pole Toggle Switch - 15 Amp Industrial Grade, Ivory AHV1202W Double Pole Toggle Switch - 15 Amp Industrial Grade, White AHWCSB115B Single Pole Toggle Switch - 15 Amp Commercial Grade, Brown BDBCSB115V Single Pole Toggle Switch - 15 Amp Commercial Grade, Ivory BDVCSB115W Single Pole Toggle Switch - 15 Amp Commercial Grade, White BDWCSB215B Double Pole Toggle Switch - 15 Amp Commercial Grade, Brown BGBCSB215GY Double Pole Toggle Switch - 15 Amp Commercial Grade, Gray BGGCSB215V Double Pole Toggle Switch - 15 Amp Commercial Grade, Ivory BGVCSB215W Double Pole Toggle Switch - 15 Amp Commercial Grade, White BGW1203B 3 Way Toggle Switch - 15 Amp Industrial Grade, Brown AEB1203V 3 Way Toggle Switch - 15 Amp Industrial Grade, Ivory AEV1203W 3 Way Toggle Switch - 15 Amp Industrial Grade, White AEWCSB315B 3 Way Toggle Switch - 15 Amp Commercial Grade, Brown BEBCSB315V 3 Way Toggle Switch - 15 Amp Commercial Grade, Ivory BEVCSB315W 3 Way Toggle Switch - 15 Amp Commercial Grade, White BEW
7601B Single Pole Decorator Switch - 15 Amp Commercial Grade, Brown CDB7601V Single Pole Decorator Switch - 15 Amp Commercial Grade, Ivory CDV7601W Single Pole Decorator Switch - 15 Amp Commercial Grade, White CDW7603B 3 Way Decorator Switch - 15 Amp Commercial Grade, Brown CEB7603V 3 Way Decorator Switch - 15 Amp Commercial Grade, Ivory CEV7603W 3 Way Decorator Switch - 15 Amp Commercial Grade, White CEW
7621B Single Pole Decorator Switch - 20 Amp Commercial Grade, Brown CAB7621V Single Pole Decorator Switch - 20 Amp Commercial Grade, Ivory CAV7621W Single Pole Decorator Switch - 20 Amp Commercial Grade, White CAW7623B 3 Way Decorator Switch - 20 Amp Commercial Grade, Brown CBB7623V 3 Way Decorator Switch - 20 Amp Commercial Grade, Ivory CBV7623W 3 Way Decorator Switch - 20 Amp Commercial Grade, White CBW
Accessories
53
Reference Data - Wiring Devices
Switches
Rotary Fan Speed Control
Item Description & Color Ruff-In StockStock Code Code
RSF5-A/6005A Fan Speed Control Fully Variable 5A w/adj. trim, Almond RAARSF5-LA/6005A Fan Speed Control Fully Variable 5A w/adj. trim, Light Almond RALRSF5-V/6005A Fan Speed Control Fully Variable 5A w/adj. trim, Ivory RAVRSF5-W/6005A Fan Speed Control Fully Variable 5A w/adj. trim, White RAW
RFS5-A / 6005Vshown
SI06P-LAshown
SI06I-Wshown
5 Amp
Occupancy Sensor150 degrees, single pole, 900 sq. ft. fluorescent:6105V (2) 30W min. 400W max. @ 120V. Rapid Start Incandescent: RBV
500W @ 120V, Motor: 1/8HP A2 120V, Ivory
150 degrees, single pole, 900 sq. ft. fluorescent:6105W (2) 30W min. 400W max. @ 120V. Rapid Start Incandescent: RBW
500W @ 120V, Motor: 1/8HP A2 120V, White6105Wshown
Toggle Dimmer(non-preset)
TI0671-A/6441A 600W INC SP Dimmer, Almond RCATI0671-LA/6441LA 600W INC SP Dimmer, Light Almond RCLRSF5-V/6005A 600W INC SP Dimmer, Ivory RCVRSF5-W/6005A 600W INC SP Dimmer, White RCW
6441Wshown
600 Watt
Decorator DimmerDI06P-A Slide w/preset 600W INC/MLV SP/3-way Dimmer, Almond RDADI06P-LA Slide w/preset 600W INC/MLV SP/3-way Dimmer, Light Almond RDLDI06P-BK Slide w/preset 600W INC/MLV SP/3-way Dimmer, Black RDKDI06P-BR Slide w/preset 600W INC/MLV SP/3-way Dimmer, Brown RDBDI06P-V Slide w/preset 600W INC/MLV SP/3-way Dimmer, Ivory RDVDI06P-W Slide w/preset 600W INC/MLV SP/3-way Dimmer, White RDWSI06I-A Full Slide (non-preset) 600W INC/MLV SP Switch, Almond REASI06I-LA Full Slide (non-preset) 600W INC/MLV SP Switch, Light Almond RELSI06I-V Full Slide (non-preset) 600W INC/MLV SP Switch, Ivory REVSI06I-W Full Slide (non-preset) 600W INC/MLV SP Switch, White REWSI06P-A Full Slide w/preset 600W INC/MLV SP/3-way Dimmer, Almond RFASI06P-LA Full Slide w/preset 600W INC/MLV SP/3-way Dimmer, Light Almond RFLSI06P-V Full Slide w/preset 600W INC/MLV SP/3-way Dimmer, Ivory RFVSI06P-W Full Slide w/preset 600W INC/MLV SP/3-way Dimmer, White RFW
DI06P-Wshown
600 Watt
Stock Components
Non Stock Components
Accesso
ries
54
ArrowLink™ Modular Wiring Devices
1
ArrowLink™ Modular Wiring Devices change the game forelectrical installers by providing an unequalled breadth ofdevices that offer greater speed and consistency to lowerinstallation costs on the job site.
The benefits of modulardevices for your entirejob, not just a portion.
ModularDecorator& ToggleSwitches
ArrowLink maximizes laborsavings:
• Breadth of line providesefficiency in moreapplications
• Modular connectionsincrease trim-out speedmore than 2 to 1
• Consistent connectionseliminate mis-wiring andreduce call-backs
• Connector leads areprepped, stripped andready to wire
• External connectionsprovide job site flexibility
• Reduces number of trim-outinstallers required
• Narrows learning curve forapprentice labor
ArrowLink Receptacle Modular Plug & Connector
ModularTVSS
Receptacles
ModularStraightBlade
Single &Duplex
Receptacles
ModularGFCIs,TamperResistantGFCIs
ModularIsolatedGround
Receptacles
ArrowLink features bulk packaging designed with the contractor in mind.
• All devices are shipped in convenient recyclable bulk pack cartons
• All packaging made of 100% recycled material
• Packaging sized for easy room-to-room transport
• No inner packaging speeds installation, eliminates waste, and reducesclean-up at the end of the job
• Incorporated “honeycomb” dividers allow a consistent package size acrossour entire ArrowLink product line for efficient shipping
Devices that arrive the way you want!
Accessories
55
ArrowLink™ Modular Wiring Devices
2
ArrowLink is designed to help you complete a job quicklyand cost effectively. The breadth of line combined withunique installation flexibility and safety features providea complete job solution.
The ArrowLink™Advantage
Polybagconnector covershields contactsfrom paint anddrywall mud
Slim profile and verticalwire orientation of deviceand connector assuresease of installation
Connectorleads #12 AWG,pre-stripped &available insolid orstrandedcopper
Plug leads#12 AWGstranded copper
Audible clickindicates a secureconnection
LeadedArrowLink plugpreserves thestructuralintegrity of thebase wiringdevice
Unique switchand receptacleconfigurationswill notinter-mate foradded safety
Patent-pending ArrowLink™modular plugs and connectorsprovide high quality circuitconnections while reducingoverall installation time.
Quality,Dependabilityand Versatility
Terminal safetybarriers provideinsulation fromconductivesurfaces
Pre-wiredmodularswitchesavailable inboth toggleand decoratorstyles for120V or 277V
Modular Receptacle
Plug andconnector designprovides firstmake/last breakgroundingconnection
#12 AWG wireleads colorcoded foryour 277Vapplications;see orderinginfo for 277Vconductorcolor options
Modular Switch
Clearly marked, consistentpre-wired configurationseliminatemis-wiring ofdevices
ArrowLink wiringdevices caneasily beconverted forstandardinstallation
Accesso
ries
Global Locations:
Cooper B-Line’s U.S. Customer Service Service Facility - Canada: Cooper B-Line - Saudi Arabia:Center is staffed Monday through Friday from Cooper B-Line - Canada PO Box 70160 - Al Khobar - 319527 a.m. to 5:00 p.m. Central Standard Time. Div. of Cooper Ind. Canada, Inc. Kingdom of Saudia ArabiaIf a situation requires that you have to contact 5925 McLaughlin Road Phone: 00966 3 812 2236us after hours, please leave a message via Mississauga, ON L5R 1B8 Fax: 00966 3 812 1291phone or E-mail so we can give it immediate Canada Email: [email protected] the following business day. Phone: (800) 569-3660
Fax: (888) 753-3355 Literature Fulfillment Questions:Service Facility - United States: Email: [email protected] Phone: (314) 426-1800Cooper B-Line - USA Fax: (314) 426-6022509 West Monroe Street Service Facility - Europe: Email: [email protected], IL 62249 Cooper B-Line, Ltd. - UKUnited States Walrow, Highbridge Request Literature Website:Phone: (800) 851-7415 Somerset, TA9 4AQ http://order.repcographics.com/cooperb/Fax: (800) 356-1438 United KingdomEmail: [email protected] Phone: + 44 (0) 1278 783371
Fax: + 44 (0) 1278 789037Email: [email protected]
SYSTEMS THAT MAKE SENSE
“ B-VOCAL SM“ B-VOCALSMQuestions, Comments, Suggestions?
with Cooper B-Line”Voice Of the Customer...Actively [email protected]
618-654-2184 ext. 456
“ B-VOCALSM
Cooper B-Line509 West Monroe StreetHighland, IL 62249Phone: 800-851-7415Fax: 618-654-1917
www.cooperbline.com
© 2009 Cooper B-Line, Inc. Printed in U.S.A. BLFRITRI-09R 1812
Cooper US, Inc.600 Travis, Ste. 5600Houston, TX 77002-1001Phone: 713-209-8400www.cooperindustries.com