MAKING GLOBAL CONNECTIONS

BLIND SPOTDETECTION SYSTEM

LUMEN AUSTRALIA Pty LtdHead Office & Design Centre10-12 Becon CrtHallam, Vic 3803Australiasales@lumen.com.auPh: + 61 3 8787 1000Fax: + 61 3 8787 1099

After briefly checking the inside and outside mirrors and perhaps a fleeting glance over your shoulder, you are suddenly given a severe fright by the loud hooting as you pull out to overtake. It is easy for a driver to fail to spot a vehicle approaching from behind in the overtaking lane or a vehicle situated in the blind spot next to your car, particularly in heavy traffic on multi-lane freeways.This is where the Lumen Blind Spot Detection (LBSD) system can take much of the strain off the driver and avoid hazardous situations by monitoring the area that is hard to see.The Lumen Blind Spot Detection (LBSD) System uses the latest radar technology to continuously monitor the drivers blind spots for nearby vehicles and provide a warning of potential dangers. The LBSD is activated when the vehicle speed exceeds 24 km/h and provides a two stage warning to the driver.

BLIND SPOT DETECTION SYSTEM

BLIND SPOT DETECTION SYSTEM

Performance:The LBSD offers many advantages over camera, infrared and

ultrasonic based blind spot detection systems. The latest 24 GHz millimetre wave radar offers excellent performance in all weather conditions including direct sunlight, complete darkness,

snow, fog, dirt, dust, rain and hail.

Vehicle Suitability:Radar-based blind spot detection systems are normally available only to high end luxury vehicles, or as factory-fit options when the vehicle is built. The Lumen Blind Spot Detection System has been

designed specifically for Genuine Accessory fitment. Vehicle specific integration kits are provided by Lumen which include plug-and-play

wiring harnesses, vehicle specific quick-fit brackets, detailed fitting instructions and templates, and no calibration required by the installer.

Installation:Each LBSD kit includes vehicle-specific radar sensor brackets,

wiring harness and visual warning indicators. No calibration is required by the installer.

System self-checking:The system includes self-diagnostic functions to provide feedback to the

driver of correct system operation.

Vehicle Aesthetics:The radar sensor, brackets and wiring harness are all located discretely

behind the vehicle rear bumper fascia. There are no components visible to the driver except the visual warning

indicator on the A-pillar trim.

Cross Traffic Alert:Cross Traffic Alert intuitively scans for adjacent approaching traffic when

reversing from a car space, if a potential accident is detected the driver is alerted.

For more in format ion about the innovat ive range of Lumen products, ca l l +61 3 87871000 or v is i t www.lumen.com.au

HMI HARNESSBUZZER SENSOR

SENSORHMIECU

Buzzer / Speaker x 1Wiring Harness x 1HMI x 2Radar Bracket x 2 Radar Sensor x 2Radar Interface

Module x 1 Switch x 1

12

6

39 90 minutes

Fitment Time:

Typical Kit Contents: