blink - ecs - documents · blink s.r.l. via montefeltro, 6 - 20156 milano - italy tel. +39 02...

29
blink M A R I N E KEYPADS AND CONTROLLS

Upload: others

Post on 24-Jun-2020

9 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

blink M A R I N E

KEYPADS AND CONTROLLS

Page 2: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

4 Models Available- KB312V-05A: 12V 5A- KB312V-10A: 12V 10A- KB324V-05A: 24V 5A- KB312V-05-10A: 12V 5A/10A (mixed)

Electrical Features - 11 switched circuits that include: - Momentary, toggle, time-out functions and digital input - Circuits rated up to 10A at 12V and 5A at 24V maximum continuous load (resistive) - 2 optional low-side circuits- 2 solid-state switched circuits that include: - Momentary, toggle, time-out functions and digital input - Pulse-width modulation of output voltage for dimming capability - Circuits rated up to 3A maximum continuous load (resistive)- Parallelable outputs (increases the current rating)- Isolated relay outputs- Replaceable automotive mini blade fuses for overcurrent protection- Input undervoltage lock down and overvoltage protection

BLINK MARINE

Power Management Enclosure

Environmental Features- Operating ambient temperature: -20°C to +70°C - Storage ambient temperature: -40°C to +85°C - Humidity: 0 to 98% (non-condensing)- IP67 enclosure

Special Features- CAN-bus compatible (CANopen/J1939 compliance available)- Field programmability of electrical functions and current limit trip points available to authorized OEMs and Value-Added Resellers (VARs)

M A R I N E

Compact and versatile; Keybox is a smart relay module for electric loads that permits the utilisation of Blink keypads where there are no PLCsystems on board. Thanks to its CAN bus interface and high power outputs, Keybox can also be used in “slave” mode with complex systems.

AUTOMOTIVE - MARINE

Keybox

CANopen

J1939

Page 3: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

KEYBOX

KEYPADPOWERKEYPOWERKEY PRO

130.30 mm5.12”

101.60 mm4.00”

SPECIFICATIONS FOR KEYBOX POWER MANAGEMENT ENCLOSURE

ELECTRICAL KEYBOX Supply voltage 12V Nominal 9-16V or 24V Nominal 18-31VStandby current <30mA per PMELoad current Max 5 A per output (resistive) @ 24V Max 10 A per output (resistive) @ 12VCommunication bus CAN Bus, RS485 BUS Circuit protection Automotive mini blade fuse

MECHANICAL Connector Cinch 581-01-18-038 & Amphenol SLPRA16CPSOMating connector Cinch 581-01-18-023 with 425-00-00-873 & Amphenol SLPPA16BSOHousing / cover 33% Glass Filled PolymerPC board 1,6mm thick, Nema Grade FR-4, Double clad with 2oz copper ENVIRONMENTAL Operating temperature -20ºC to +70ºC Storage temperature -40ºC to +85ºC Humidity 0 to 98% (no condensation) Salt spray 96HrsIngress Protection Rating IP67

FEATURES Circuits 13Size mm 135,4 x 130,3 x 42,3 Low volt sense & lock down Optional Sense pins levels 13Dimming/PWM Features Available on 2 outputsCircuit status monitoring OptionalField re-programmable OptionalExternal status communication Optionalon the busPull down 2 Optionals

42.3

0 m

m16

6”

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

KEYBOX

KEYPADPOWERKEYPOWERKEY PRO

AUTOMOTIVE

MARINE

14,

7 m

m5.

78”

48,

5 m

m19

.10”

7

6,3

mm

30.0

3” 1

24,8

mm

49.1

3”

130.30 mm5.12”

Page 4: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

AUTOMOTIVE - MARINE

ELECTRICAL FEATURES

- 12V or 24V nominal input voltage

- 100Ampere total PME input current carrying capability

- 12 switched circuits that include:

- Momentary, toggle, and time-out functions.

- Pulse-width modulation of output voltage for dimming

capability.

- 3 circuits rated up to 20A maximum continuous load, 9

circuits rated up to 15A.

- 2 complete H-Bridge circuits for driving reversible motors

- Parallelable output increases current rating.

- An electronic circuit breaker protects every circuits. The current

ratio for each circuit can be set independently.

- Remote reset of any output circuitry fault through keypad.

- Input undervoltage lock down.

PC10

BLINK MARINE

Solid State POWERCORE Management Enclosure

SPECIAL FEATURES

- CAN-bus compatible (CANopen/J1939 compliance available)

- Field programmability of electrical functions and current limit trip

points available to authorized OEMs and Value-Added Resellers

(VARs)

- 4-circuit bypass for essential functions

- Optional N.O. relay contact

M A R I N E

The Power Management Unit is the brain of the system. It receives requests from switches or keypads and handles these commands based on the current state of the system. The output may be the activation/deactivation of a circuit or starting a timer function. The PowerCore then sends status data from system to keypads to turn on/off the LED indicators and backlighting.

CANopen

J1939

Page 5: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

Ø 5,

1 m

0.20

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marketing the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

M A R I N E

ELECTRICAL PC10 Supply voltage 12V and 24V Nominal Voltage (8-32VDC)Standby current <30mA per PMELoad current Max 20A per outputInput current 100A max Communication bus RS-485 between keypad and PME CAN Bus SlaveCircuit protection electronic overcurrent protection and automotive mini blade fuse

MECHANICAL Connector Molex MX150L #19427-0049 & 19427-0032 Mating connector Molex MX150L #19418-0030 & 19418-0004 Housing ALLOY 6060 and ZA4C1 Seal TPV 8211-75Power stud 3/8-16, plated steelPC board 1,6mm thick, Nema Grade FR-4, Double clad with 3oz copper ENVIRONMENTAL Operating temperature -20ºC to +85ºC Storage temperature -40ºC to +85ºC Humidity 0 to 98% (no condensation) Ingress Protection Rating IP65

FEATURES Circuits 12Size mm connectors incl. 230 x 170 x 86 Remote current trip reset Standard on all outputs System reset Optional Status indicator Standard By-pass 4 outputsLow volt sense & lock down Optional Pull down 4 outputs“H” Bridge capability 2 complete “H” bridges available Level sense input 8 inputsDimming/PWM Features Available on 10 outputs Circuit status monitoring OptionalField re-programmable OptionalExternal status communication Optionalon the busN.O. relay contact Optional

86.2

0 m

m

170.23 mm6.70”

230.

84 m

m

219.

34 m

m3.

39”

9.08

8.63

118 mm4.64”

SPECIFICATIONS FOR PC10 SOLID STATE POWERCORE MANAGEMENT ENCLOSURE

Page 6: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

AUTOMOTIVE - MARINE

ELECTRICAL FEATURES

- 12V or 24V nominal input voltage

- 150Ampere total PME input current carrying capability

- 12 switched circuits that include:

- Momentary, toggle, and time-out functions.

- Pulse-width modulation of output voltage for dimming

capability.

- 3 circuits rated up to 20A maximum continuous load, 9

circuits rated up to 15A.

- 2 complete H-Bridge circuits for driving reversible motors

- Parallelable output increases current rating.

- An electronic circuit breaker protects every circuits. The current

ratio for each circuit can be set independently.

- Remote reset of any output circuitry fault through keypad.

- Input undervoltage lock down.

PC20

BLINK MARINE

Solid State POWERCORE Management Enclosure

CANopen

J1939

SPECIAL FEATURES

- CAN-bus compatible (CANopen/J1939 compliance available)

- Field programmability of electrical functions and current limit trip

points available to authorized OEMs and Value-Added Resellers

(VARs)

- 4-circuit bypass for essential functions

- Optional N.O. relay contact

M A R I N E

The Power Management Unit is the brain of the system. It receives requests from switches or keypads and handles these commands based on the current state of the system. The output may be the activation/deactivation of a circuit or starting a timer function. The PowerCore then sends status data from system to keypads to turn on/off the LED indicators and backlighting.

Page 7: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

Ø 5,

1 m

0.20

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marketing the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

M A R I N E

ELECTRICAL PC20 Supply voltage 12V and 24V Nominal Voltage (8-32VDC)Standby current <30mA per PMELoad current Max 20A per outputInput current 150A max Communication bus RS-485 between keypad and PME CAN Bus SlaveCircuit protection electronic overcurrent protection and automotive mini blade fuse

MECHANICAL Connector Molex MX150L #19427-0032 & 19429-0040 & 19429-0039 Mating connector Molex MX150L #19418-0030 & 19418-0004 & 19418-0027 Housing ALLOY 6060 and ZA4C1 Seal TPV 8211-75Power stud 3/8-16, plated steelPC board 1,6mm thick, Nema Grade FR-4, Double clad with 3oz copper ENVIRONMENTAL Operating temperature -20ºC to +85ºC Storage temperature -40ºC to +85ºC Humidity 0 to 98% (no condensation) Ingress Protection Rating IP65

FEATURES Circuits 22Size mm connectors incl. 230 x 170 x 86 Remote current trip reset Standard on all outputs System reset Optional Status indicator Standard By-pass 4 outputsLow volt sense & lock down Optional Pull down 9 outputs“H” Bridge capability 4 complete “H” bridges available Level sense input 8 inputsDimming/PWM Features Available on 10 outputs Circuit status monitoring OptionalField re-programmable OptionalExternal status communication Optionalon the busN.O. relay contact Optional

86.2

0 m

m

170.23 mm6.70”

230.

84 m

m

219.

34 m

m3.

39”

9.08

8.63

118 mm4.64”

SPECIFICATIONS FOR PC20 SOLID STATE POWERCORE MANAGEMENT ENCLOSURE

Page 8: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN (J1939) address to the keypad while also assigning the same or a different RS485 address. Communicate on either BUS simultane-ously.

CANopen Communications Protocol – Fully compliant with Device Profile 401d.

J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch. Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages but can be adjusted in a wide range.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages but can be adjusted in a wide range.

PowerKey1000 is the flagship model for Blink Marine’s IP67 keypads. It boasts 10 keys and is available with CANopen and J1939 protocols. Compact and elegant, the rubber of the PowerKey 1000 can be personalized for both the icons and the numbers of led assigned to each individual key. The keypad is also clearly visible in the dark thanks RGB backlight.

POWERKEY 1000 CAN

FLEXIBLE - SMART - RUGGED

Icons shown on this keypad are for visual demonstration only.

AUTOMOTIVE - MARINE

HARDWARE FEATURESIP67/IP69K rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

THREE MODELS

10 Keys

YOUR LOGO

8 Keys

YOUR LOGO

6 Keys

CANopen

J1939

Page 9: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

STANDARD FEATURES• Custom laser etched icons• Multiple LED status indicators per function• Low profile• Compact• Vertical or horizontal mount

• Overlay• Laser Etch• Pad Print• LED backlit icons• ON/OFF, momentary, toggle & scroll

SPECIFICATIONS FOR STANDARD KEYPADS

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

SOFTWARE FEATURES• Change CAN keypad addresses independently• Periodic Status transmission• Heartbeat

• Event status transmission• LED acknowledgement• Address claim transmission• CANopen, J1939

OTHER BENEFITS• Programmer’s manual available to help support

plug-and-play reconfigurability• Available in fixed legends

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS CANopen, J1939

MECHANICALConnector Deutsch DT04-4P Switch Life 3 million operationsMechanical Shock X, Y, Z 50Gs 11msVibration X, Y, Z 10 - 150Hz 0.15mm ampMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +85°C According to table 2 of ISO16750-4Humidity 0 to 98% (no condensation)UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus CleanerIngress Protection Rating IP67/NIP69K

# 10 - 32 UNC THREAD, 2 PLACES

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

127.00 mm5.00’’

84.20 mm3.31’’0.84’’

21.40 mm

63.5

0 m

m2.

50’’

1.25

’’6.

10’’

155.

00 m

m14

.90

mm

0.58

’’

31.8

0 m

m

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

(X2)

16.3

0 m

m6.

41”

Page 10: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN (J1939) address to the keypad while also assigning the same or a different RS485 address. Communicate on either BUS simultane-ously.

J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages but can be adjusted in a wide range.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages but can be adjusted in a wide range.

PowerKey1400 is the flagship model for Blink Marine’s IP67 keypads. It boasts 14 keys and is available with CANopen and J1939 protocols. Compact and elegant, the rubber of the PowerKey 1400 can be personalized for both the icons and the numbers of led assigned to each individual key. The keypad is also clearly visible in the dark thanks RGB backlight.

POWERKEY 1400 CAN

FLEXIBLE - SMART - RUGGED

HARDWARE FEATURESIP67/IP69K rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 30 min.

UV Protected – UVB 400 hours: keypad is highly resistant to deterioration caused by exposure to sunlight.

THREE MODELS

Icons shown on this keypad are for visual demonstration only.

14 Keys

YOUR LOGO

12 Keys

YOUR LOGO

10 Keys

CANopen

J1939

AUTOMOTIVE - MARINE

Page 11: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

17.9

0 m

m0.

70’’

STANDARD FEATURES• Custom laser etched icons• Multiple LED status indicators per function• Multicolor indicator LED• Low profile• Compact• Vertical or horizontal mount

• Overlay• Laser Etch• Pad Print• LED backlit icons• ON/OFF, momentary, toggle & scroll

SPECIFICATIONS FOR STANDARD KEYPADS

SOFTWARE FEATURES• Change CAN keypad addresses independently• Periodic Status transmission• Heartbeat

• Event status transmission• LED acknowledgement• Address claim transmission• CANopen, J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

• Available in fixed legends

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS CANopen, J1939

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMechanical Shock X, Y, Z 50Gs 11msVibration X, Y, Z 10 - 150Hz 0.15mm ampMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +85°C According to table 2 of ISO16750-4Humidity 0 to 98% (no condensation)UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus CleanerIngress Protection Rating IP67/IP69K

170.00 mm6.69’’

124.50 mm22.70 mm4,90’’0.89’’

63.5

0 m

m2.

50’’

1.25

’’6.

10’’

155.

00 m

m

(X2)

16.3

0 m

m6.

41”

# 10 - 32 UNC THREAD, 2 PLACES

31.8

0 m

m

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm≈

Page 12: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

POWERKEY PRO PKP-2200-LI

FLEXIBLE - SMART - RUGGED

HARDWARE FEATURESIP67/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different stock inserts can be viewed at blinkmarine.com, and it is possible to order customized ones.

A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.

The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.

The rubber is molded on the backside in such a way that it acts as a gasket, blocking liquids and preventing them from leaking in through the attachment holes located on the support upon which the keypad is installed.

Icons shown on this keypad are for visual demonstration only.

AUTOMOTIVE - MARINE

PKP-2200-LI is a compact keypad based on CAN protocol. It comes equipped with four keys with interchangeable 24 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously. J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

Page 13: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

BLUE=CAN LOW

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

(X2)

16.3

0 m

m0.

64’’ 56.00

2.2’’

STANDARD FEATURES• Reconfigurable keys• Relegendable buttons• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons

• Multicolor indicator rings• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds of stock icons to choose from

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +85°C According to table 2 of ISO16750-4UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/IP69K

SPECIFICATIONS FOR STANDARD KEYPADS

SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission

• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

12

34

RED=POWER

BLACK=GROUND WHITE=CAN HIGH

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)

13.

20 m

m0.

51’’

165.

00 m

m6.

49’’

94.00 mm3.70’’

85.5

0 m

m3.

36’’

#10 - 32 STUDS

Page 14: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

POWERKEY PRO PKP-2200-SI

FLEXIBLE - SMART - RUGGED

HARDWARE FEATURESIP67/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different stock inserts can be viewed at blinkmarine.com, and it is possible to order customized ones.

A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.

The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.

The rubber is molded on the backside in such a way that it acts as a gasket, blocking liquids and preventing them from leaking in through the attachment holes located on the support upon which the keypad is installed.

Icons shown on this keypad are for visual demonstration only.

AUTOMOTIVE - MARINE

PKP-2200-SI is a compact keypad based on CAN protocol. It comes equipped with four keys with interchangeable 15 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously. J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

Page 15: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

BLUE=CAN LOW

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +85°C According to table 2 of ISO16750-4UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/IP69K

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

(X2)

16.3

0 m

m0.

64’’ 28.80

1.13’’

STANDARD FEATURES• Reconfigurable keys• Relegendable buttons• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons

• Multicolor indicator rings• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds of stock icons to choose from

SPECIFICATIONS FOR STANDARD KEYPADS

SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission

• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

12

34

RED=POWER

BLACK=GROUND WHITE=CAN HIGH

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)

16.3

0 m

m0.

64’’

165.

00 m

m6.

49’’

65.00 mm2.56’’

70.0

0 m

m2.

75’’

#10 - 32 STUDS

Page 16: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

POWERKEY PRO PKP-2300-SI

FLEXIBLE - SMART - RUGGED

HARDWARE FEATURESIP67/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different stock inserts can be viewed at blinkmarine.com, and it is possible to order customized ones.

A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.

The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.

Icons shown on this keypad are for visual demonstration only.

AUTOMOTIVE - MARINE

PKP-2300-SI is a compact keypad based on CAN protocol. It comes equipped with six keys with interchangeable 15 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously. J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

Page 17: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

STANDARD FEATURES• Reconfigurable keys• Relegendable buttons• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons

• Multicolor indicator rings• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds of stock icons to choose from

SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission

• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

BLUE=CAN LOWRED=POWER

BLACK=GROUND WHITE=CAN HIGH

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)

94.50 mm3.72’’

70.0

0 m

m2.

75’’

123

456

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

(X2)

16.3

0 m

m0.

64’’ 47.50

1.87’’

16.3

0 m

m0.

64’’

165.

00 m

m6.

49’’

#10 - 32 STUDS

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939MTBF 239870 hours (in accordance with MIL-HDBK-217 – operating environment Ground Mobile)

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +85°C According to table 2 of ISO16750-4UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/IP69K

SPECIFICATIONS FOR STANDARD KEYPADS

Page 18: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

POWERKEY PRO PKP-2300-SI-FR

FLEXIBLE - SMART - RUGGED

HARDWARE FEATURESIP67/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.

The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.

Icons shown on this keypad are for visual demonstration only.

AUTOMOTIVE - MARINE

PKP-2300-SI-FR is a compact keypad based on CAN protocol. It comes equipped with six keys. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which we can laser-etch custom icons make it possible for the user to customize each keypad in a wide range of variations.

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously. J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.

CANopen Communications Protocol – Fully compliant with Device Profile 401d.

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

Page 19: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CUV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/NEMA6/IP69K

STANDARD FEATURES• Reconfigurable keys• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons

• Multicolor indicator rings• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds standard icons to choose from

SPECIFICATIONS FOR STANDARD KEYPADS

SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission

• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

94.50 mm3.72’’

70.0

0 m

m2.

75’’

BLUE=CAN LOWRED=POWER

BLACK=GROUND WHITE=CAN HIGH

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)

123

456

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

(X2)

16.3

0 m

m0.

64’’ 47.50

1.87’’

16.3

0 m

m0.

64’’

165.

00 m

m6.

49’’

#10 - 32 STUDS

Page 20: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

POWERKEY PRO PKP-2400–LI

FLEXIBLE - SMART - RUGGED

CANopen Communications Protocol – Fully compliant with Device Profile 401d.

HARDWARE FEATURESIP67/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different stock inserts can be viewed at blinkmarine.com, and it is possible to order customized ones.

A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.

The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.

The rubber is molded on the backside in such a way that it acts as a gasket, blocking liquids and preventing them from leaking in through the attachment holes located on the support upon which the keypad is installed.

AUTOMOTIVE - MARINE

PKP-2400-LI a compact keypad based on CAN protocol. It comes equipped with eight keys with interchangeable 24 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously.

J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

Icons shown on this keypad are for visual demonstration only.

Page 21: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

BLUE=CAN LOW

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +85°C According to table 2 of ISO16750-4UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/IP69K

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

(X2)

16.3

0 m

m0.

64’’

111.754.40’’

#10 - 32 STUDS

STANDARD FEATURES• Reconfigurable keys• Relegendable buttons• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons

• Multicolor indicator rings• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds of stock icons to choose from

SPECIFICATIONS FOR STANDARD KEYPADS

SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission

• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

RED=POWER

BLACK=GROUND WHITE=CAN HIGH

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)

13.2

0 m

m0.

51’’

165.

00 m

m6.

49’’

156.50 mm6.16’’

94.0

0 m

m3.

70’’

1234

5678

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

Page 22: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

POWERKEY PRO PKP-2400–SI

FLEXIBLE - SMART - RUGGED

CANopen Communications Protocol – Fully compliant with Device Profile 401d.

HARDWARE FEATURESIP67/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different stock inserts can be viewed at blinkmarine.com, and it is possible to order customized ones.

A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.

The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.

Icons shown on this keypad are for visual demonstration only.

AUTOMOTIVE - MARINE

PKP-2400-SI is a compact keypad based on CAN protocol. It comes equipped with eight keys with interchangeable 15 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously.

J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

Page 23: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

BLUE=CAN LOW

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

(X2)

16.3

0 m

m0.

64’’

78.003.07’’

#10 - 32 STUDS

STANDARD FEATURES• Reconfigurable keys• Relegendable buttons• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons

• Multicolor indicator rings• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds of stock icons to choose from

SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission

• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

RED=POWER

BLACK=GROUND WHITE=CAN HIGH

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)

16.3

0 m

m0.

64’’

165.

00 m

m6.

49’’

123.50 mm4.86’’

70.0

0 m

m2.

75’’

1234

5678

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939 MTBF 238506 hours (in accordance with MIL-HDBK-217 – operating environment Ground Mobile)

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +85°C According to table 2 of ISO16750-4UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/IP69K

SPECIFICATIONS FOR STANDARD KEYPADS

Page 24: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

POWERKEY PRO PKP-2600-SI

FLEXIBLE - SMART - RUGGED

HARDWARE FEATURESIP67/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

Customizable inserts – The replacement system for individual inserts makes modifying the keypad layout simpler and more economical. Hundreds of different stock inserts can be viewed at blinkmarine.com, and it is possible to order customized ones.

A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.

The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.

Icons shown on this keypad are for visual demonstration only.

AUTOMOTIVE - MARINE

PKP-2600-SI is a compact keypad based on CAN protocol. It comes equipped with twelve keys with interchangeable 15 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously. J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Online Set-up – An online set-up system makes it possible to select and design your own prototype, then order it directly on blinkmarine.com.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

Page 25: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

STANDARD FEATURES• Reconfigurable keys• Relegendable buttons• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons

• Multicolor indicator rings• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds of stock icons to choose from

SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission

• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

BLUE=CAN LOWRED=POWER

BLACK=GROUND WHITE=CAN HIGH

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

(X2)

16.3

0 m

m0.

64’’

#10 - 32 STUDS

16.3

0 m

m0.

64’’

165.

00 m

m6.

49’’

136.145.36’’

181.50 mm7.14’’

70.0

0 m

m2.

75’’

123456

789101112

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939 MTBF 204291 hours (in accordance with MIL-HDBK-217 – operating environment Ground Mobile)

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +85°C According to table 2 of ISO16750-4UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/IP69K

SPECIFICATIONS FOR STANDARD KEYPADS

Page 26: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

POWERKEY PRO PKP-2600-SI-FR

FLEXIBLE - SMART - RUGGED

HARDWARE FEATURESIP67/IP69K waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.

UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

A membrane compensation valve which self compensate the internal pressure within the keypad, alleviating mechanical stresses that can be produced by shifts in external temperatures.

The keypad’s symmetrical design and spacing between keys makes it easier to install multiple keypads alongside one another.

Icons shown on this keypad are for visual demonstration only.

AUTOMOTIVE - MARINE

PKP-2600-SI-FR is a compact keypad based on CAN protocol. It comes equipped with twelve keys. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which we can laser-etch custom icons make it possible for the user to customize each keypad in a wide range of variations.

SOFTWARE FEATURESCAN and RS485 Keypad Addresses – Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simulta-neously. J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages can be adjusted in a wide range.

CANopen Communications Protocol – Fully compliant with Device Profile 401d.

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

Page 27: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

STANDARD FEATURES• Reconfigurable keys• LED state & status configurable• Vertical or horizontal mount• Flush or front mount• LED backlit icons• Multicolor indicator rings

• Laser etched icons• ON/OFF, momentary, toggle & scroll • Hundreds of stock icons to choose from

SOFTWARE FEATURES• Change CAN or RS485 keypad addresses independently• Periodic status transmission• Heartbeat• Event status transmission

• LED acknowledgement• Address claim transmission• RS485, CANopen and J1939

OTHER BENEFITS• Programmer’s manual available to help support plug-and-play reconfigurability

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.

181.50 mm7.14’’

70.0

0 m

m2.

75’’

BLUE=CAN LOWRED=POWER

BLACK=GROUND WHITE=CAN HIGH

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

(X2)

16.3

0 m

m0.

64’’

#10 - 32 STUDS

16.3

0 m

m0.

64’’

165.

00 m

m6.

49’’

136.145.36’’

123456

789101112

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS RS485, CANopen, J1939 MTBF 204291 hours (in accordance with MIL-HDBK-217 – operating environment Ground Mobile)

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operationsMounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CThermal Shock -40°C to +85°C According to table 2 of ISO16750-4UV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic AcidIngress protection Rating IP67/IP69K

SPECIFICATIONS FOR STANDARD KEYPADS

Page 28: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

POWERTRACK

FLEXIBLE - SMART - RUGGED

Periodic status transmission - The keypad can be configured to send messages to the CANopen, on a predetermined frequency. This frequency can be set as low as every 10 milliseconds. This feature can be used to monitor the continuity of the system and is also helpful in troubleshooting a fault.

Periodic heartbeat - The keypad sends a continuous broadcast ofmessages to indicate it is still functioning correctly. The frequency of these messages can be adjusted as needed.

HARDWARE FEATURESUV Protected - UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.

Splashproof - PowerTrack is resistant to impacts generated by water spray and other potentially damaging elements like dust, sand and mud.

Independent KEY - The device is able to support any multiple pressure key combination.

An ergonomic knob - This controller was designed to guarantee a comfortable grip in any given situation thanks to a rubber insert that wraps all the way around the knob.

Encoder with pushbutton - Use of the knob is both comfortable and immediate. For example, the knob allows its user to manage scroll & select operations without letting go of the handle.

SOFTWARE FEATURESCAN keypad addresses - You are able to assign any valid CAN address to the keypad.

CANopen communication protocol - We have released a new version of our CANopen that is fully compliant with Device Profile 301d. Configurable baud rate and custom CAN message.

J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Smart led management - The intensity of the LEDs can be adjusted, whilst any LED indicator – whether fixed or blinking – can be person-alized according to color preference. Backlighting for the keypad is also adjustable.

Concave keys - The ergonomic design simplifies touch navigation of the quick-pick keys.

Event Status transmission - The keypad can send messages to the BUS indicating a button press event or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching positions of a mechanical switch.

The PowerTrack keypad and its rotary encoder were both designed by Blink Marine as a natural evolution of the Powerkey 1000, from which it has inherited the same attractive and compact visual design. Together with the six quick-pick keys, the addition of a rotary pushbutton knob makes it possible to manage complex scroll functions on the display, and can interface with onboard systems thanks to CANbus protocols. PowerTrack boasts numerous personalization options, thanks in part to the flexible management of multicolor LEDs.

AUTOMOTIVE

DESIGN YOUR OWN PROTOTYPE ONLINE

CANopen

J1939

Page 29: blink - ECS - Documents · Blink S.r.l. Via Montefeltro, 6 - 20156 Milano - Italy Tel. +39 02 3088583 - Fax +39 02 33406697 - info@blinkgroup.com!WARNING! IMPROPER SELECTION, IMPROPER

SPECIFICATIONS FOR STANDARD KEYPADS

ELECTRICALSupply Voltage 12-24Vdc Nominal (8-32VDC)Standby Current <50 mACommunication BUS CANopen, J1939

MECHANICALConnector Deutsch DT04-4PSwitch Life 3 million operation minimumEncoder pushbutton life: 1 million operations minimumEncoder rotation life: 100.000 cycles minimum Mounting Studs #10-32 CDA-510 phosphor bronze, electroplated right tinKeypad Silicone rubber with polyurethane hardcoatPC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copperOperating Temperature -40°C to +70°CStorage Temperature -40°C to +85°CUV Protection UVB 400 hoursSalt Spray Per ASTMB117Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus CleanerIngress protection Rating IP54

STANDARD FEATURES• Custom laser etched icons• High intensity led status indicators• Multicolor LED Backlight• CANopen compliant• Event status transmission• Periodic status transmission• Green/red LED indicators

• Compact design• Vertical or horizontal mount • Protected from inverted polarity• Encoder with pushbutton• Periodic Heartbeat• LED acknowledgement• CANopen and J1939 Communication

OPTIONAL FEATURES• RS485 Communication (MOQ 100 pcs.)

120.00 mm

4.72”

84.50 mm

5.00 mm Ø

CABLE OUT

NOTE: ALL CONNECTION WIRES ARE THE SAME LENGTH

MOUNTING NOTES:Nuts thread: #10-32Maximum torque: 0,8Nm

13.4

0 m

m

16.4

0 m

m

6.45

135.

00 m

m70

.00

mm

0.52

”5.

31”

2.75

18.5

0 m

m7.

28”

#10 - 32 STUDS

50.00 mm Ø

3.32”

0.19”1.96”

32.40 mm

2.20 mm

1.27”0.86”

_ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _ . _

_ . _

. _

. _ .

_ . _

. _

. _ .

_ . _

. _

. _ .

_ . _

. _

. _

Blink S.r.l.Via Montefeltro, 6 - 20156 Milano - ItalyTel. +39 02 3088583 - Fax +39 02 33406697www.blinkmarine.com - [email protected]

!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Blink, provide product and/or system options for further investigation by users having technical expertise. It is important to analyze all aspects of the application, including consequences of any failure. Due to the variety of operating conditions and applications for these product(s), the manufacturer of the application is solely responsible for marking the final selection of the product(s) and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Blink at any time without notice.