bliss™ mike haupt – marketing technical manager. contents new registration/composition features...
TRANSCRIPT
BLISS™
Mike Haupt – Marketing Technical Manager
CONTENTS
• New registration/Composition
• Features and Benefits
• Crops
• Timing of Application
• Rates/Dosage
• Unique Selling Points
• Summary
NEW REGISTRATION/COMPOSITION
Reg. No. B4705, Act No.36 of 1947
A micro-element foliar feed to correct deficiencies of zinc, manganese, copper and boron in wheat and field crops.
(FERTILIZER GROUP 2)
ACTIVE INGREDIENTS:Nitrogen (N)…………………………………….28.6g/kgSulphur (S)………………………………………113.8g/kgManganese (Mn)...............................107.1g/kgZinc (Zn).............................................104.7g/kgCopper (Cu)........................................54.2g/kgBoron (B)....................................... …..13.9g/kg
FEATURES AND BENEFITS
• A powder formulation was developed to eliminate the settlement/ crystallization found in GRAINMAX 4 and TRIOSPRAY FLO.
• Much higher elemental loading
• Reduced transport cost
• Is 3.85 x more concentrated than GRAINMAX 4, just comparing Mn, Zn, Cu & B alone.
• Has additional nitrogen and a high dose of sulphur. Sulphur is one of the most “forgotten” elements.
• Has a built in compatibility aid to reduce binding/ precipitation.
CROPS
• Formulated for all grain crops (wheat, maize) and row crops such as
soya.
• Suited for sugarcane and pastures too as this formulation is cost
effective and contains the desired range of trace elements plus sulphur.
• The Zn, Mn, Cu levels are often “locked” after glyphosate applications,
so Bliss™ is ideally suited for application 7-10 days after such
applications.
TIMING OF APPLICATION
• Wheat- apply at 4 to 6 leaf stage in wheat and a second (if required)
application on wheat at late tillering/early piping stage.
• Maize- apply at V4-V6 for maize. Second application at stage V8 on
maize if required.
• 7-10 days after Roundup® applications on RR crops.
• Cane and pastures, apply once there is enough leaf area.
• Allow 3 to 4 weeks between applications.
DOSAGE/RATES
Begin with 500g Bliss® per Ha in early season and the second application at 750g per Ha once the crop has grown and the water volume is increased.
NB.BLISS™ should ideally be first mixed with a bit of clean water and thoroughly mixed before incorporating it in the spray tank. Do not apply if temperatures exceed 30°C at time of application. Crops should not be overly stressed during such applications.
SULPHUR (S) DEFICIENCY
ZINC (Zn) DEFICIENCY
COPPER (Cu) DEFICIENCY
BORON (B) DEFICIENCY
“Poor pollination & form”
UNIQUE SELLING POINTS
• Higher loading, reduced transport, easier handling & reduced packaging. Bags used, which means no drum returns.
• Additional sulphur as an added bonus, especially beneficial on protein crops and pastures.
• Amino acid as additional source of N & S.
• Chelation properties of amino and citric acid.
• WP/WG formulation is stable and not subjected to stability issues as seen in many liquid formulations
SUMMARY OF CONTENTS
• Composition- N,S, Zn, Mn, Cu, B
• Features and Benefits- Dosage, weight, cost effective
• Crops- grains, row crops, pastures & sugarcane
• Timing- see slide above
• Rates /Dosage- 500 to 750g (early/ late season)
THANK YOU