bluetooth installation specification

Upload: helintom

Post on 04-Jun-2018

220 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/13/2019 Bluetooth Installation Specification

    1/9

    FlyAudio Corporation

    Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA Web: www.flyaudio.cn

    Installation Example for FLYAUDIO Bluetooth Hang-free

    System

    Special for: VW Turan

    This installation example is just for reference

    Hand-free MIC can install in the location which is good for recognition and easy to

    route cable and not destroying the decoration in car.

    In general, hand-free MIC can be installed in the following locations

    1. at A columniation of FL windshield, as follow:

    2. Under A columniation, in the up-left of the dashboard, as follow:

  • 8/13/2019 Bluetooth Installation Specification

    2/9

    FlyAudio Corporation

    Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA Web: www.flyaudio.cn

    3. There is a recognition hole in the front top light box, in which recognition MIC

    can be install , not destroy the in-car decoration at all and have a good recognition,

    as follow:

    The third installation with recognition MIC hidden, not destroying the in-car

  • 8/13/2019 Bluetooth Installation Specification

    3/9

  • 8/13/2019 Bluetooth Installation Specification

    4/9

    FlyAudio Corporation

    Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA Web: www.flyaudio.cn

    Hard to lay the cable to the windshield, withdraw the dressing mirror if necessary.

    At the same time, it is hard to withdraw the dressing mirror, be careful!

    Cable is routed to the edge of the windshield

  • 8/13/2019 Bluetooth Installation Specification

    5/9

    FlyAudio Corporation

    Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA Web: www.flyaudio.cn

    Route the cable following the edge of windshield straight to the A columniation.

    Make the cable hidden with the special tool as follow.

    Route the cable along after reaching A columniation.

  • 8/13/2019 Bluetooth Installation Specification

    6/9

    FlyAudio Corporation

    Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA Web: www.flyaudio.cn

    Put the cable inside the cover-board

    Viewing out the routing cable

  • 8/13/2019 Bluetooth Installation Specification

    7/9

    FlyAudio Corporation

    Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA Web: www.flyaudio.cn

    Route the cable along the waterproof glue to the next juncture and put the cable

    hidden

    Route the cable to the arrow direction and inside-forward.

  • 8/13/2019 Bluetooth Installation Specification

    8/9

    FlyAudio Corporation

    Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA Web: www.flyaudio.cn

    Put the cable hidden simultaneously.

    At last, route the cable to main unit through the dashboard. Now it is OK.

  • 8/13/2019 Bluetooth Installation Specification

    9/9

    FlyAudio Corporation

    Add:Rm.301 3/F Metro Plaza No.58 Jianzhong Rd. Tianhe Software Park, guangzhou P.R.CHINA Web: www.flyaudio.cn

    After routing the cable, connect the recognition cable to the Bluetooth

    extension-box. The cable routing is OK now. Coming up, open the Bluetooth

    operation interface and match the phone following the manual.

    See the effect of the installation again