boiler sight glass failure
DESCRIPTION
BOILER SIGHT GLASS FAILURE. CAER Presentation March 27, 2014 Jim Riley Acknowledgement: Bill Gamba, Joint Health and Safety Committee Co-Chair for investigation contributions. PRESENTATION OVERVIEW. Description of a 600# boiler sight glass failure - PowerPoint PPT PresentationTRANSCRIPT
BOILER SIGHT GLASS FAILURE
CAER PresentationMarch 27, 2014Jim Riley
Acknowledgement: Bill Gamba, Joint Health and Safety Committee Co-Chair for investigation contributions
PRESENTATION OVERVIEW• Description of a 600# boiler sight glass failure • Damage mechanism associated with the failure• Progressive degradation over time of mica and glass• ITPM (inspection, testing, and preventive maintenance) tasks to
prevent failures
Kicker box (if needed to summarize key point, otherwise delete)
*Footnote goes here if needed 2
600# Boiler sight glass failure• Split level gauge with two sight
glasses/housings• Normal level in upper sight glass• Glass thinned to the point that it
fractured and failed• Small steam release. No process
materials were released. No unit upset occurred
• Sight glass was isolated using chain wheels located at grade to close the block valves.
• Redundant split level sight glasses at other end of the boiler and level float chamber/transmitter provided water level indication while this sight glass was serviced.
*Footnote goes here if needed 3
Damage mechanisms• Alumina silicate high temperature
glass is a silica lattice with alkali oxides as fluxing agents. It corrodes under two conditions:– Leaching (acid effect) where
hydronium ions (H3O +) are exchanged for the alkalis in the glass
– Etching (alkali effect) by hydroxyl ions (OH-) acting upon the anions Na+, K+, and B+++ followed by dissolution.
• Ruby mica shields occur as monoclinic crystals which resist acids and alkalis. It degrades due to the layered pattern.– Condensing drops at the steam
vapor/BFW level range– River patterns in the ruby mica
layers attacked
*Footnote goes here if needed 4
PROGRESSIVE DEGRADATION OF MICA/GLASS
*Footnote goes here if needed 5
ITPM TASKS TO PREVENT FAILURES• Boiler operator surveillance specifically looking for ‘milky
appearance’. Train operators on what to look for.• Redundant visual inspections by boiler permit inspectors at
annual and 6-month external permit inspections.• Block in the sight glass if the ‘milky appearance’ due to
etching/leaching of the glass becomes apparent. Do not leave the sight glass in service to further degrade.
• Service the sight glass by replacing both the mica shields and the glass when they are ‘milky appearance’.
• Service the sight glass by replacing both the mica shields and the glass when the internal boiler inspection is done based on permit variance period allowance.
*Footnote goes here if needed 6
Any questions that you may have?
*Footnote goes here if needed 7