boq-hesco
DESCRIPTION
HESCO DetailsTRANSCRIPT
Schedules of Rates and PricesSchedule No. 1 - Plant and Mandatory Spare Parts Supplied from Abroad
1: A Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Ghulam Ali along with allied Transmission Line.
Item Description Country of Origin
1 2 3
A 132 KV EQUIPMENT
A-1
A-2
A-3
A-4
A-5
A-6
A-7
A-8
A-9 11 KV Lightening Arrestors
A-10
A-11 132 KV Steel Gantries
i) Beam 12 m
ii) Column 10+3.1 m
iii) Earth Mast 13.1 m
iv) Earthing Platform
A-12 132 KV Substation Connectors
i) TMLH
ii) TMHH
iii) 90B 63F
iv) TM 63 A
Total of Item “A”
132/11.5kV, 20/26 MVA, 3-phase power transformer complete with control cubicle, accessories, bushings with extended creepage distance and connectors.
145 kV single phase surge arrester substation class having an extended creepage distance with steel supporting structure complete with mounting arrangement.
132 kv, 40kA, 2000 Amps., 110V DC, 3-Pole Circuit Breakers with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132KV, 40 KA, 2000Amp, 3 Pole single throw Bus Disconnectors with Steel supporting structure and connectors.
132KV, 40 KA, 2000Amp, 3 Pole single throw Line Disconnectors with extended creepage connectors for 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40KA, Single Phase Current Transformer ratio 1200:600:300/5A (4 Core) Line CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40 KA, Single Phase Current Transformer ratio 200:100/5 A (3 Core) Transformer CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132 kv, Voltage Transformers ratio 132 KV/√3/ 110/√3 S/ Phase two core with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132 KV tension string assemblies complete with hardware disc type strength 100 KN having 11 insulators per string complete with hardware as specified.
B 132 KV Control & Protection System
B-1 Control Panels:
i) Line Control Panel CP-20
ii) Line Control Panel CP-30
ii) Transformer Control Panel CP-50
B-2 Relay Panels:
i) Line Relay Panel RP-3
ii) Transformer Relay Panel RP-4
Total of Item “B”
C 132 KV Substation General Equipment
C-1
ii) 11Kv Aluminium Pipes 63 mm dia ,4 m long.
iii) Earth wire 7/3.0 (9mm dia.)
iv) Earth wire tension assemblies with G-clamps
v) 11 KV post Insulator with clamp
vi) Disc Insulator 80 KN
vii) 11 KV structure.
viii).SF6 Gas Cylinder 40 Kg
C-2 Cables & accessories
a) 15 KV XLPE Power Cables along with termination Kits.
i) 1 core 1000 MCM
ii) 1 core 500 MCM
iii) 3 core 4/0 AWG 120 sq mm
iv) Indoor termination kit for 1000 MCM
v) Indoor termination kit for 500MCM
vi)Indoor termination kit for 3 Core 4/0 AWG
vii)Outdoor termination kit for 1000 MCM
viii)Outdoor termination kit for 500 MCM
ix) Outdoor termination kit for 3 Core 4/0 AWG
C-3 Control Cables:
i)Control Cable 4x2.5mm²
ii)Control Cable 8x2.5mm²
iii)Control Cable 16x2.5mm²
iv)Control Cable 4x6mm²
v) Cable Trays, Racks, Supports, cables conduits etc.
C-4
iii): Cartridges
Type A
Type B
Type C
iv): Moulds with holding clamps.
(Bidders to indicate quantities for satisfactory completion of work)
i) All Aluminum conductor 600mm² (Hawthorn)
Earthing Material Substation Grounding System for 132 kV switchyard and control house building.
i) 95mm² Copper conductor
ii) Earthing rod (16mm dia, 3m long)
Type A
Type B
Type C
v): Grounding Connectors
Type I
Type II
Type III
C-5 Control house building lightning protection system
C-6
C-7
C-8 11 KV Panels
i) 11 KV incoming panel 25 KA, 2500A
ii) 11 KV outgoing panel 25 KA, 630A
C-9 Battery And Battery Charger:
C-10 110 V DC auxiliary services system as specified.
C-11 Fire fighting systems
C-12 Control Room Furniture
f) Split Air conditioner 1.5tons
g) Refrigerator
C-13
Switch yard lighting system 415/240V AC and & emergency lighting system 220V & 1 10VDC, power sockets including cabling etc as specified.
Control building electrification system 415/240V AC & emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified.
I. Battery 110V DC, 150 AH
II. Battery Charger 110V DC
III. AC/DC Station Auxiliary Panel
IV. 11/0.415 KV pad mounted Transformer, 200KVA with LT Cable 19/.083.
V. Marshalling Box for T/F Bay, Line Bay
VI. Marshalling Box for PT Bay
a) Mobile fire extinguisher for switchyard area
b) Fire extinguisher for control building (wall mounted)
a) Officer Table size 7’x4’
b) Supervisor Table size 5’x3’
c) Officer ‘s Chairs
d) Visitor’s Chairs
e) Notice Board size 6’x3½’
132 KV SDT Matli – Tando Ghulam Ali T/Line (Feed for Tando Ghulam Ali Grid Station New, Length 30.15 Kms)
i) Tower Type ZM1
ii) 3 Meter Leg Extension for ZM1
iii) 6 Meter Leg Extension for ZM1
iv) Tower Type ZM30
v) 3 Meter Leg Extension for ZM30
vi) Tower Type ZM60
vii) 3 Meter Leg Extension for ZM60
viii) Grounding Sets
xvii) Single Suspension fitting for earth
Total of Item “C”
D Erection & Testing Equipment and Maintenance Tools
9) Temporary earthing device
10) Multimeter, fluke, 8060 A or equivalent.
Total of Item “D”
ix) Lynx Conductor
x) Earth Wire 9 mm
xi) Disc Insulators(80KN Fog type)
xii) Single Suspension Fitting for Lynx
xiii) Single Tension fitting for Lynx
xiv) Stock Bridge damper for Lynx
xv) Mid Span joints for Lynx
xvi) Repair sleeve for Lynx
xviii) Single Tension fitting for Earth wire
xix) Stock Bridge damper for Earth Wire
xx) Mid Span joints for Earth Wire
xxi) P.G Clamp for Lynx
The Testing, Maintenance and erection equipment shall include the following compatible with the plant supplied in accordance with the technical provisions:
1) Set of wrenches
2) Digital phase angle meter
3) DC insulation Resistance tester(5000V)
4) Standard multi range multi meter with DC to AC current.
5) DC earth fault detector
6) Instruments transformers polarity testers.
7) Earth resistance testing set
8) Insulating oil dielectric testing set
Total of column No. 7 to be carried forward Schedule No. 5- Grand Summery
Schedules of Rates and PricesSchedule No. 1 - Plant and Mandatory Spare Parts Supplied from Abroad
1: A Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Ghulam Ali along with allied Transmission Line.
QtyTotal Price1 Taxes and Duties
Local Currency
4 5 6 7=4x6 8
1 No.
3Nos.
3 -Sets
4-sets
2 sets
6 Nos.
3 Nos.
3 Nos.
3 Nos.
6 Sets
4 Nos
6 Nos.
01 No.
8 Nos.
6 Nos.
12 Nos.
03 Nos.
09 Nos.
Unit Price1
CIP HyderabadForeign
Currency Foreign Currency
1 Nos
1 Nos
1 No
2 Nos.
1 No.
500 Mtrs
3 Nos.
260 Mtrs
12 Nos.
3 Nos.
66 Nos.
1 No.
1 No.
800Mtrs
----
330Mtrs
09 Nos.
---
8 Nos.
09 Nos.
---
6 Nos.
1550Mtrs
1300 Mtrs
950 Mtrs
1450 Mtrs
1-Lot
2000Mtrs
45 Nos.
150 Nos.
60 Nos.
45 Nos.
03 Nos.
02 Nos.
02 Nos.
Nil
Nil
Nil
1-Lot
1-Lot
1-Lot
1 No.
6 Nos.
1-set
1 No.
1 No.
1 No.
3 No.
1 No.
1-Lot
5 Nos.
12 Nos.
1 No.
1 No.
6 Nos.
6 Nos.
2 Nos.
2 Nos.
1 No.
93 Nos.
05 Nos.
02 Nos.
08 Nos.
01 No.
06 Nos.
01 No.
107 Sets.
92.50 Km
30.50 Km
4282 Nos.
279 Sets
90 Sets.
636 Nos.
45 Nos.
20 Nos.
93sets.
28 sets.
212 Nos.
20 Nos.
84 Nos.
1-set
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
Schedule No. 1 - Plant and Mandatory Spare Parts Supplied from Abroad
1-B: Conversion from 66KV to 132KV (AIS) Grid Stations at Digri along with allied Transmission Line.
Item Description
1 2 3
A 132 KV EQUIPMENT
A-1
A-2
A-3
A-4
A-5
A-6
A-7
A-8
A-9 11 KV Lightening Arrestors
A-10
A-11 132 KV Steel Gantries
i) Beam 12 m
ii) Column 10+3.1 m
iii) Earth Mast 13.1 m
iv) Earthing Platform
A-12 132 KV Substation Connectors
i) TMLH
ii) TMHH
iii) TM 63F
iv) TM 63 A
Total of Item “A”
B 132 KV Control & Protection System B-1 Control Panels:
i) Line Control Panel CP-20
Country of Origin
132/11.5kV, 20/26 MVA, 3-phase power transformer complete with control cubicle, accessories, bushings with extended creepage distance and connectors.
145 kV single phase surge arrester substation class having an extended creepage distance with steel supporting structure complete with mounting arrangement.
132 kv, 40kA, 2000 Amps., 110V DC, 3-Pole Circuit Breakers with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132KV, 40 KA, 2000Amp, 3 Pole single throw Bus Disconnectors with Steel supporting structure and connectors.
132KV, 40 KA, 2000Amp, 3 Pole single throw Line Disconnectors with extended creepage connectors for 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40KA, Single Phase Current Transformer ratio 1200:600:300/5A (4 Core) Line CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40 KA, Single Phase Current Transformer ratio 200:100/5 A (3 Core) Transformer CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132 kv, Voltage Transformers ratio 132 KV/√3/ 110/√3 S/ Phase two core with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132 KV tension string assemblies complete with hardware disc type strength 100 KN having 11 insulators per string complete with hardware as specified.
ii) Line Control Panel CP-30
iii) Transformer Control Panel CP-50
B-2 Relay Panels:
i) Line Relay Panel RP-3
ii) Transformer Relay Panel RP-4
Total of Item “B”
C 132 KV Substation General Equipment(Bidders to indicate quantities for satisfactory completion of work)
C-1
ii) 11Kv Aluminium Pipes 63 mm dia ,4 m long.
iii) Earth wire 7/3.0 (9mm dia.)
iv) Earth wire tension assemblies with G-clamps
v) 11 KV post Insulator with clamp
vi) SF6 Gas Cylinder 40 Kg
vi) Disc Insulator 80 KN
vi) 11 KV structure.
C-2 Cables & accessories
a) 15 KV XLPE Power Cables along with termination Kits.
i) 1 core 1000 MCM
ii) 1 core 500 MCM
iii) 3 core 4/0 AWG 120 sq mm
iv) Indoor termination kit for 1000 MCM
v) Indoor termination kit for 500MCM
vi)Indoor termination kit for 3 Core 4/0 AWG
vii)Outdoor termination kit for 1000 MCM
viii)Outdoor termination kit for 500 MCM
ix) Outdoor termination kit for 3 Core 4/0 AWG
C-3 Control Cables:
i)Control Cable 4x2.5mm²
ii)Control Cable 8x2.5mm²
iii)Control Cable 16x2.5mm²
iv)Control Cable 4x6mm²
v) Cable Trays, Racks, Supports, cables conduits etc.
C-4
iii): Cartridges
Type A
Type B
Type C
iv): Moulds with holding clamps.
Type A
Type B
i) All Aluminum conductor 600mm² (Hawthorn)
Earthing Material Substation Grounding System for 132 kV switchyard and control house building.
i) 95mm² Copper conductor
ii) Earthing rod (16mm dia, 3m long)
Type C
v): Grounding Connectors
Type I
Type II
Type III
C-5 Control house building lightning protection system
C-6
C-7
C-8 11 KV Panels
i) 11 KV incoming panel 25 KA, 2500A
ii) 11 KV outgoing panel 25 KA, 630A
C-9 Battery And Battery Charger:
i) Battery 110V DC, 150 AH
ii) Battery Charger 110V DC
iii) AC/DC Station Auxiliary Panel
iv)11/0.415 KV pad mounted Transformer, 200KVA with LT Cable 19/.083.
xvii) Marshalling Box for T/F Bay, Line Bay
xviii) Marshalling Box for PT Bay
C-10 110 V DC auxiliary services system as specified.
C-11 Fire fighting systems
C-12 Control Room Furniture
a) Officer Table size 7’x4’
f) Split Air conditioner 1.5tons
g) Refrigerator
C-13
Switch yard lighting system 415/240V AC and & emergency lighting system 220V & 1 10VDC, power sockets including cabling etc as specified.
Control building electrification system 415/240V AC & emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified.
a) Mobile fire extinguisher for switchyard area
b) Fire extinguisher for control building (wall mounted)
b) Supervisor Table size 5’x3’
c) Officer ‘s Chairs
d) Visitor’s Chairs
e) Notice Board size 6’x3½’
Material for 132 KV SDT Tando Ghulam Ali- Digri T/L feed for Digri G/S New Length 26.10 Kms
I. Tower Type ZM1
II. 3 Meter Leg Extension for ZM1
III. Tower Type ZM30
IV. 3 Meter Leg Extension for ZM30
V. Tower Type ZM60
VI. 3 Meter Leg Extension for ZM60
VII. Grounding Sets
VIII. Lynx Conductor
IX. Earth Wire 9 mm
X. Disc Insulators(80KN Fog type)
XI. Single Suspension Fitting for Lynx
XII. Single Tension fitting for Lynx
D Erection & Testing Equipment and Maintenance Tools
9) Temporary earthing device
10) Multimeter, fluke, 8060 A or equivalent.
Total of Item “D”Total of column No. 7 to be carried forward Schedule No. 5- Grand Summery
XIII. Stock Bridge damper for Lynx
XIV. Mid Span joints for Lynx
XV. Repair sleeve for Lynx
XVI. Single Suspension fitting for earth
XVII. Single Tension fitting for Earth wire
XVIII. Stock Bridge damper for Earth Wire
XIX. Mid Span Joints for Earth Wire
XX. P.G Clamp for Lynx
The Testing, Maintenance and erection equipment shall include the following compatible with the plant supplied in accordance with the technical provisions:
1) Set of wrenches
2) Digital phase angle meter
3) DC insulation Resistance tester(5000V)
4) Standard multi range multi meter with DC to AC current.
5) DC earth fault detector
6) Instruments transformers polarity testers.
7) Earth resistance testing set
8) Insulating oil dielectric testing set
Schedule No. 1 - Plant and Mandatory Spare Parts Supplied from Abroad
1-B: Conversion from 66KV to 132KV (AIS) Grid Stations at Digri along with allied Transmission Line.
QtyTotal Price1 Taxes and Duties
CIP Hyderabad Foreign Currency Local Currency
4 5 6 7=4x6 8
1 No.
3Nos.
3 -Sets
4-sets
2 sets
6 Nos.
3 Nos.
3 Nos.
3 Nos
6 Sets
4 Nos
6 Nos.
01 No.
8 Nos.
6 Nos.
12 Nos.
03 Nos.
09 Nos.
1 Nos
Unit Price1
Foreign Currency
1 Nos
1 No
2 Nos.
1 No.
500Mtrs
3 Nos.
260 Mtrs
12 Nos.
3 Nos.
1 No.
66 Nos.
1 No.
800Mtrs
----
330 Mtrs
09Nos.
---
8 Nos.
09 Nos.
---
6 Nos.
1550Mtrs
1300 Mtrs
950 Mtrs
1450 Mtrs
1-Lot
2000Mtrs
45 Nos.
150 Nos.
60 Nos.
45 Nos.
03 Nos.
02 Nos.
02 Nos.
NIL
NIL
NIL
1-Lot
1-Lot
1-Lot
1 No.
6 Nos.
1-set
1 No.
1 No.
1 No.
03 Nos.
01 No.
1-Lot
5 Nos.
12 Nos.
1 No.
1 No.
6 Nos.
6 Nos.
2 Nos.
2 Nos.
1 No.
80 Nos.
02 Nos.
05 Nos.
01No.
08 Nos.
01 No.
93 Sets
80.00 Km
26.00Km
3770 Nos
240 Sets
84 Sets.
552 Nos.
40 Nos.
15 Nos.
80 sets.
28 sets.
184 Nos.
19 No.
80 Nos.
1-set
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
Schedule No. 1 - Plant and Mandatory Spare Parts Supplied from Abroad1-C: Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Jan Muhammad along with allied Transmission Line.
Item Description Qty
1 2 3 4
A 132 KV EQUIPMENT
A-1 1 No.
A-2 3Nos.
A-3 3 -Sets
A-4 4-sets
A-5 2 sets
A-6 6 Nos.
A-7 3 Nos.
A-8 3 Nos.
A-9 11 KV Lightening Arrestors 3 Nos.
A-10 6 Sets
A-11 132 KV Steel Gantries
i) Beam 12 m 4 Nos
ii) Column 10+3.1 m 6 Nos.
iii) Earth Mast 13.1 m 01 No.
iv) Earthing Platform 8 Nos.
A-12 132 KV Substation Connectors
i) TMLH 6 Nos.
ii) TMHH 12 Nos.
iii) 90B 63F 03 Nos.
iv) TM 63 A 09 Nos.
Country of Origin
132/11.5kV, 20/26 MVA, 3-phase power transformer complete with control cubicle, accessories, bushings with extended creepage distance and connectors.
145 kV single phase surge arrester substation class having an extended creepage distance with steel supporting structure complete with mounting arrangement.
132 kv, 40kA, 2000 Amps., 110V DC, 3-Pole Circuit Breakers with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132KV, 40 KA, 2000Amp, 3 Pole single throw Bus Disconnectors with Steel supporting structure and connectors.
132KV, 40 KA, 2000Amp, 3 Pole single throw Line Disconnectors with extended creepage connectors for 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40KA, Single Phase Current Transformer ratio 1200:600:300/5A (4 Core) Line CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40 KA, Single Phase Current Transformer ratio 200:100/5 A (3 Core) Transformer CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132 kv, Voltage Transformers ratio 132 KV/√3/ 110/√3 S/ Phase two core with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132 KV tension string assemblies complete with hardware disc type strength 100 KN having 11 insulators per string complete with hardware as specified.
Total of Item “A”
B 132 KV Control & Protection System
B-1 Control Panels:
i) Line Control Panel CP-20 1 No
ii) Line Control Panel CP-30 1 No.
iii) Transformer Control Panel CP-50 1 No
B-2 Relay Panels:
i) Line Relay Panel RP-3 2 Nos.
ii) Transformer Relay Panel RP-4 1 No.
Total of Item “B”
C 132 KV Substation General Equipment
C-1 500Mtrs
ii) 11Kv Aluminium Pipes 63 mm dia ,4 m long. 3 Nos.
iii) Earth wire 7/3.0 (9mm dia.) 260 Mtrs
iv) Earth wire tension assemblies with G-clamps 12 Nos.
v) 11 KV post Insulator with clamp 3 Nos.
vi) Disc Insulator 80 KM 66 Nos.
vi) 11 KV structure. 1 No.
vii). SF6 Gas Cylinder 40 Kg 1 No.
C-2 Cables & accessories
a) 15 KV XLPE Power Cables along with termination Kits.
i) 1 core 1000 MCM 800Mtrs
ii) 1 core 500 MCM ----
iii) 3 core 4/0 AWG 120 sq mm 330Mtrs
iv) Indoor termination kit for 1000 MCM 09 Nos.
v) Indoor termination kit for 500MCM ---
vi)Indoor termination kit for 3 Core 4/0 AWG 8 Nos.
vii)Outdoor termination kit for 1000 MCM 09 Nos.
viii)Outdoor termination kit for 500 MCM ---
ix) Outdoor termination kit for 3 Core 4/0 AWG 6 Nos.
C-3 Control Cables:
i)Control Cable 4x2.5mm² 1650Mtrs
ii)Control Cable 8x2.5mm² 1500 Mtrs
iii)Control Cable 16x2.5mm² 1000 Mtrs
iv)Control Cable 4x6mm² 1550 Mtrs
v) Cable Trays, Racks, Supports, cables conduits etc. 1-Lot
C-4
2000Mtrs
45 Nos.
iii): Cartridges 1-Lot
Type A 150 Nos.
Type B 60 Nos.
Type C 45 Nos.
iv): Moulds with holding clamps.
Type A 03 Nos.
(Bidders to indicate quantities for satisfactory completion of work)
i) All Aluminum conductor 600mm²(Hawthorn)
Earthing Material Substation Grounding System for 132 kV switchyard and control house building.
i) 95mm² Copper conductor
ii) Earthing rod (16mm dia, 3m long)
Type B 02 Nos.
Type C 02 Nos.
v): Grounding Connectors
Type I Nil
Type II Nil
Type III Nil
C-5Control house building lightning protection system 1-Lot
C-6 1-Lot
C-7 1-Lot
C-8 11 KV Panels
i) 11 KV incoming panel 25 KA, 2500A 1 No.
ii) 11 KV outgoing panel 25 KA, 630A 6 Nos.
C-9 Battery And Battery Charger:
i) Battery 110V DC, 150 AH 1-set
ii) Battery Charger 110V DC 1 No.
iii) AC/DC Station Auxiliary Panel 1 No.
1 No.
xvii) Marshalling Box for T/F Bay, Line Bay 3
xviii) Marshalling Box for PT Bay 1
C-10 110 V DC auxiliary services system as specified. 1-Lot
C-11 Fire fighting systems
5 Nos.
12 Nos.
C-12 Control Room Furniture
1 No.
1 No.
6 Nos.
6 Nos.
2 Nos.
f) Split Air conditioner 1.5tons 2 Nos.
g) Refrigerator 01 No.
C-13
43 Nos.
04 Nos.
03 Nos.
50 Sets
48.00 Km
16 Km
2380 Nos
129 Sets
72 Sets.
318 Nos.
22 Nos.
05 Nos.
Switch yard lighting system 415/240V AC and & emergency lighting system 220V & 1 10VDC, power sockets including cabling etc as specified.
Control building electrification system 415/240V AC & emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified.
iv)11/0.415 KV pad mounted Transformer, 200KVA with LT Cable 19/.083.
a) Mobile fire extinguisher for switchyard area
b) Fire extinguisher for control building (wall mounted)
a) Officer Table size 7’x4’
b) Supervisor Table size 5’x3’
c) Officer ‘s Chairs
d) Visitor’s Chairs
e) Notice Board size 6’x3½’
Material for 132 KV SDT Digri – Tando Jan Muhammad T/Line ( Feed for T.J. Muhammad Grid Station New) Length 15.70 Km)
I. Tower Type ZM1
II. Tower Type ZM30
III. Tower Type ZM60
IV. Grounding Sets
V. Lynx Conductor
VI. Earth Wire 9 mm
VII. Disc Insulators(80KN Fog type)
VIII. Single Suspension Fitting for Lynx
IX. Single Tension fitting for Lynx
X. Stock Bridge damper for Lynx
XI. Mid Span joints for Lynx
XII. Repair sleeve for Lynx
43 sets.
09 sets.
98 Nos.
10 No,
66 Nos.
Total of Item “C”
D Erection & Testing Equipment and Maintenance Tools
1-set
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
9) Temporary earthing device 1 No.
10) Multimeter, fluke, 8060 A or equivalent. 1 No.
Total of Item “D”
Total of column No. 7 to be carried forward
Schedule No. 5- Grand Summery
XIII. Single Suspension fitting for earth
XIV.
XV. Single Tension fitting for Earth wire
XVI. Stock Bridge damper for Earth Wire
XVII. Mid Span Joints for earth Wire
XVIII. P.G Clamp for Lynx
The Testing, Maintenance and erection equipment shall include the following compatible with the plant supplied in accordance with the technical provisions:
1) Set of wrenches
2) Digital phase angle meter
3) DC insulation Resistance tester(5000V)
4) Standard multi range multi meter with DC to AC current.
5) DC earth fault detector
6) Instruments transformers polarity testers.
7) Earth resistance testing set
8) Insulating oil dielectric testing set
Schedule No. 1 - Plant and Mandatory Spare Parts Supplied from Abroad1-C: Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Jan Muhammad along with allied Transmission Line.
5 6 7=4x6 8
Unit Price1Total
Price1Taxes and
Duties
Foreign Currency
CIP Hyderaba
d
Foreign Currency
Local Currency
Schedule No. 2- Plant and Mandatory Spare Parts Supplied from within employers country
2:A Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Ghulam Ali along with allied Transmission Line.
Item Description Qty
1 2 3 4 5 = 3 x4
A 132 KV EQUIPMENT
A-11 No.
A-2
3Nos.
A-3
3 -Sets
A-44-sets
A-5
2 sets
A-6
6 Nos.
A-7
3 Nos.
A-8
3 Nos.
A-9 11 KV Lightening Arrestors 3 Nos.
A-10
6 Sets
A-11 132 KV Steel Gantries
i) Beam 12 m 4 Nos
ii) Column 10+3.1 m 6 Nos.
iii) Earth Mast 13.1 m 01 No.
iv) Earthing Platform 8 Nos.
EXW Unit Price1
Total EXW Price1
132/11.5kV, 20/26 MVA, 3-phase power transformer complete with control cubicle, accessories, bushings with extended creepage distance and connectors.
145 kV single phase surge arrester substation class having an extended creepage distance with steel supporting structure complete with mounting arrangement.
132 kv, 40kA, 2000 Amps., 110V DC, 3-Pole Circuit Breakers with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132KV, 40 KA, 2000Amp, 3 Pole single throw Bus Disconnectors with Steel supporting structure and connectors.
132KV, 40 KA, 2000Amp, 3 Pole single throw Line Disconnectors with extended creepage connectors for 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40KA, Single Phase Current Transformer ratio 1200:600:300/5A (4 Core) Line CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40 KA, Single Phase Current Transformer ratio 200:100/5 A (3 Core) Transformer CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132 kv, Voltage Transformers ratio 132 KV/√3/ 110/√3 S/ Phase two core with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132 KV tension string assemblies complete with hardware disc type strength 100 KN having 11 insulators per string complete with hardware as specified.
A-12 132 KV Substation Connectors
i) TMLH 6 Nos.
ii) TMHH 12 Nos.
iii) 90B 63F 03 Nos.
iv) TM 63 A 09 Nos.
Total of Item “A”
B 132 KV Control & Protection System
B-1 Control Panels:
i) Line Control Panel CP-20 1 Nos
ii) Line Control Panel CP-30 1 Nos
ii) Transformer Control Panel CP-50 1 No
B-2 Relay Panels:
i) Line Relay Panel RP-3 2 Nos.
ii) Transformer Relay Panel RP-4 1 No.
Total of Item “B”
C 132 KV Substation General Equipment
C-1 500 Mtrs
ii) 11Kv Aluminium Pipes 63 mm dia ,4 m long. 3 Nos.
iii) Earth wire 7/3.0 (9mm dia.) 260 Mtrs
iv) Earth wire tension assemblies with G-clamps 12 Nos.
v) 11 KV post Insulator with clamp 3 Nos.
vi) Disc Insulator 80 KN 66 Nos.
vii) 11 KV structure. 1 No.
viii).SF6 Gas Cylinder 40 Kg 1 No.
C-2 Cables & accessories
a) 15 KV XLPE Power Cables along with termination Kits.
i) 1 core 1000 MCM 800Mtrs
ii) 1 core 500 MCM ----
iii) 3 core 4/0 AWG 120 sq mm 330Mtrs
iv) Indoor termination kit for 1000 MCM 09 Nos.
v) Indoor termination kit for 500MCM ---
vi)Indoor termination kit for 3 Core 4/0 AWG 8 Nos.
vii)Outdoor termination kit for 1000 MCM 09 Nos.
viii)Outdoor termination kit for 500 MCM ---
ix) Outdoor termination kit for 3 Core 4/0 AWG 6 Nos.
C-3 Control Cables:
i)Control Cable 4x2.5mm² 1550Mtrs
ii)Control Cable 8x2.5mm² 1300 Mtrs
iii)Control Cable 16x2.5mm² 950 Mtrs
iv)Control Cable 4x6mm² 1450 Mtrs
v) Cable Trays, Racks, Supports, cables conduits etc. 1-Lot
C-4
(Bidders to indicate quantities for satisfactory completion of work)
i) All Aluminum conductor 600mm² (Hawthorn)
Earthing Material Substation Grounding System for 132 kV switchyard and control house building.
2000Mtrs
45 Nos.
iii): Cartridges
Type A 150 Nos.
Type B 60 Nos.
Type C 45 Nos.
iv): Moulds with holding clamps.
Type A 03 Nos.
Type B 02 Nos.
Type C 02 Nos.
v): Grounding Connectors
Type I Nil
Type II Nil
Type III Nil
C-5 Control house building lightning protection system 1-Lot
C-6 1-Lot
C-7 1-Lot
C-8 11 KV Panels
1 No.
ii) 11 KV outgoing panel 25 KA, 630A 6 Nos.
C-9 Battery And Battery Charger:
1-set
1 No.
1 No.
1 No.
3 No.
1 No.
C-10 110 V DC auxiliary services system as specified. 1-Lot
C-11 Fire fighting systems
5 Nos.
12 Nos.
C-12 Control Room Furniture
1 No.
1 No.
6 Nos.
6 Nos.
2 Nos.
f) Split Air conditioner 1.5tons 2 Nos.
g) Refrigerator 1 No.
C-13
i) 95mm² Copper conductor
ii) Earthing rod (16mm dia, 3m long)
Switch yard lighting system 415/240V AC and & emergency lighting system 220V & 1 10VDC, power sockets including cabling etc as specified.
Control building electrification system 415/240V AC & emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified.
i) 11 KV incoming panel 25 KA, 2500A
I. Battery 110V DC, 150 AH
II. Battery Charger 110V DC
III. AC/DC Station Auxiliary Panel
IV. 11/0.415 KV pad mounted Transformer, 200KVA with LT Cable 19/.083.
V. Marshalling Box for T/F Bay, Line Bay
VI. Marshalling Box for PT Bay
a) Mobile fire extinguisher for switchyard area
b) Fire extinguisher for control building (wall mounted)
a) Officer Table size 7’x4’
b) Supervisor Table size 5’x3’
c) Officer ‘s Chairs
d) Visitor’s Chairs
e) Notice Board size 6’x3½’
132 KV SDT Matli – Tando Ghulam Ali T/Line (Feed for Tando Ghulam Ali Grid Station New, Length 30.15 Kms)
93 Nos.
05 Nos.
02 Nos.
08 Nos.
01 No.
06 Nos.
01 No.
107 Sets.
92.50 Km
30.50 Km
4282 Nos.
279 Sets
90 Sets.
636 Nos.
45 Nos.
20 Nos.
xvii) Single Suspension fitting for earth 93sets.
28 sets.
212 Nos.
20 Nos.
84 Nos.
Total of Item “C”
D
1-set
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
9) Temporary earthing device 1 No.
10) Multimeter, fluke, 8060 A or equivalent. 1 No.
Total of Item “D”
i) Tower Type ZM1
ii) 3 Meter Leg Extension for ZM1
iii) 6 Meter Leg Extension for ZM1
iv) Tower Type ZM30
v) 3 Meter Leg Extension for ZM30
vi) Tower Type ZM60
vii) 3 Meter Leg Extension for ZM60
viii) Grounding Sets
ix) Lynx Conductor
x) Earth Wire 9 mm
xi) Disc Insulators(80KN Fog type)
xii) Single Suspension Fitting for Lynx
xiii) Single Tension fitting for Lynx
xiv) Stock Bridge damper for Lynx
xv) Mid Span joints for Lynx
xvi) Repair sleeve for Lynx
xviii) Single Tension fitting for Earth wire
xix) Stock Bridge damper for Earth Wire
xx) Mid Span joints for Earth Wire
xxi) P.G Clamp for Lynx
Erection & Testing Equipment and Maintenance Tools
The Testing, Maintenance and erection equipment shall include the following compatible with the plant supplied in accordance with the technical provisions:
1) Set of wrenches
2) Digital phase angle meter
3) DC insulation Resistance tester(5000V)
4) Standard multi range multi meter with DC to AC current.
5) DC earth fault detector
6) Instruments transformers polarity testers.
7) Earth resistance testing set
8) Insulating oil dielectric testing set
Total of column No. 7 to be carried forward Schedule No. 5- Grand Summery
Schedule No. 2- Plant and Mandatory Spare Parts Supplied from within employers country
2:A Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Ghulam Ali along with allied Transmission Line.
Sales Tax Total Price
6 7 = 5 + 6
Schedule No. 2- Plant and Mandatory Spare Parts Supplied from within employers country
2:B Conversion from 66KV to 132KV (AIS) Grid Stations at Digri along with allied Transmission Line.
Item Description Qty
1 2 3 4 5 = 3 x4
A 132 KV EQUIPMENT
A-1 1 No.
A-2 3Nos.
A-3 3 -Sets
A-4 4-sets
A-5 2 sets
A-6 6 Nos.
A-7 3 Nos.
A-8 3 Nos.
A-9 11 KV Lightening Arrestors 3 Nos
A-10 6 Sets
A-11 132 KV Steel Gantries
i) Beam 12 m 4 Nos
ii) Column 10+3.1 m 6 Nos.
iii) Earth Mast 13.1 m 01 No.
iv) Earthing Platform 8 Nos.
A-12 132 KV Substation Connectors
i) TMLH 6 Nos.
ii) TMHH 12 Nos.
iii) TM 63F 03 Nos.
iv) TM 63 A 09 Nos.
EXW Unit Price1
Total EXW Price1
132/11.5kV, 20/26 MVA, 3-phase power transformer complete with control cubicle, accessories, bushings with extended creepage distance and connectors.
145 kV single phase surge arrester substation class having an extended creepage distance with steel supporting structure complete with mounting arrangement.
132 kv, 40kA, 2000 Amps., 110V DC, 3-Pole Circuit Breakers with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132KV, 40 KA, 2000Amp, 3 Pole single throw Bus Disconnectors with Steel supporting structure and connectors.
132KV, 40 KA, 2000Amp, 3 Pole single throw Line Disconnectors with extended creepage connectors for 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40KA, Single Phase Current Transformer ratio 1200:600:300/5A (4 Core) Line CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40 KA, Single Phase Current Transformer ratio 200:100/5 A (3 Core) Transformer CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132 kv, Voltage Transformers ratio 132 KV/√3/ 110/√3 S/ Phase two core with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132 KV tension string assemblies complete with hardware disc type strength 100 KN having 11 insulators per string complete with hardware as specified.
Total of Item “A”B 132 KV Control & Protection System
B-1 Control Panels:
i) Line Control Panel CP-20 1 Nos
ii) Line Control Panel CP-30 1 Nos
iii) Transformer Control Panel CP-50 1 No
B-2 Relay Panels:
i) Line Relay Panel RP-3 2 Nos.
ii) Transformer Relay Panel RP-4 1 No.
Total of Item “B”C 132 KV Substation General Equipment
C-1 500Mtrs
ii) 11Kv Aluminium Pipes 63 mm dia ,4 m long. 3 Nos.
iii) Earth wire 7/3.0 (9mm dia.) 260 Mtrs
iv) Earth wire tension assemblies with G-clamps 12 Nos.
v) 11 KV post Insulator with clamp 3 Nos.
vi) SF6 Gas Cylinder 40 Kg 1 No.
vi) Disc Insulator 80 KN 66 Nos.
vi) 11 KV structure. 1 No.
C-2 Cables & accessories
a) 15 KV XLPE Power Cables along with termination Kits.
i) 1 core 1000 MCM 800Mtrs
ii) 1 core 500 MCM ----
iii) 3 core 4/0 AWG 120 sq mm 330 Mtrs
iv) Indoor termination kit for 1000 MCM 09Nos.
v) Indoor termination kit for 500MCM ---
vi)Indoor termination kit for 3 Core 4/0 AWG 8 Nos.
vii)Outdoor termination kit for 1000 MCM 09 Nos.
viii)Outdoor termination kit for 500 MCM ---
ix) Outdoor termination kit for 3 Core 4/0 AWG 6 Nos.
C-3 Control Cables:
i)Control Cable 4x2.5mm² 1550Mtrs
ii)Control Cable 8x2.5mm² 1300 Mtrs
iii)Control Cable 16x2.5mm² 950 Mtrs
iv)Control Cable 4x6mm² 1450 Mtrs
v) Cable Trays, Racks, Supports, cables conduits etc. 1-Lot
C-4
2000Mtrs
45 Nos.
iii): Cartridges
Type A 150 Nos.
Type B 60 Nos.
Type C 45 Nos.
iv): Moulds with holding clamps.
Type A 03 Nos.
(Bidders to indicate quantities for satisfactory completion of work)
i) All Aluminum conductor 600mm² (Hawthorn)
Earthing Material Substation Grounding System for 132 kV switchyard and control house building.
i) 95mm² Copper conductor
ii) Earthing rod (16mm dia, 3m long)
Type B 02 Nos.
Type C 02 Nos.
v): Grounding Connectors
Type I NIL
Type II NIL
Type III NIL
C-5 Control house building lightning protection system 1-Lot
C-6 1-Lot
C-7 1-Lot
C-8 11 KV Panels
i) 11 KV incoming panel 25 KA, 2500A 1 No.
ii) 11 KV outgoing panel 25 KA, 630A 6 Nos.
C-9 Battery And Battery Charger:
i) Battery 110V DC, 150 AH 1-set
ii) Battery Charger 110V DC 1 No.
iii) AC/DC Station Auxiliary Panel 1 No.
1 No.
xvii) Marshalling Box for T/F Bay, Line Bay 03 Nos.
xviii) Marshalling Box for PT Bay 01 No.
C-10 110 V DC auxiliary services system as specified. 1-Lot
C-11 Fire fighting systems
5 Nos.
12 Nos.
C-12 Control Room Furniture
a) Officer Table size 7’x4’ 1 No.
1 No.
6 Nos.
6 Nos.
2 Nos.
f) Split Air conditioner 1.5tons 2 Nos.
g) Refrigerator 1 No.
C-13
80 Nos.
02 Nos.
05 Nos.
01No.
01 No.
93 Sets
80.00 Km
26.00Km
240 Sets
Switch yard lighting system 415/240V AC and & emergency lighting system 220V & 1 10VDC, power sockets including cabling etc as specified.
Control building electrification system 415/240V AC & emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified.
iv)11/0.415 KV pad mounted Transformer, 200KVA with LT Cable 19/.083.
a) Mobile fire extinguisher for switchyard area
b) Fire extinguisher for control building (wall mounted)
b) Supervisor Table size 5’x3’
c) Officer ‘s Chairs
d) Visitor’s Chairs
e) Notice Board size 6’x3½’
Material for 132 KV SDT Tando Ghulam Ali- Digri T/L feed for Digri G/S New Length 26.10 Kms
I. Tower Type ZM1
II. 3 Meter Leg Extension for ZM1
III. Tower Type ZM30
IV. 3 Meter Leg Extension for ZM30
V. Tower Type ZM60 08 Nos.
VI. 3 Meter Leg Extension for ZM60
VII. Grounding Sets
VIII. Lynx Conductor
IX. Earth Wire 9 mm
X. Disc Insulators(80KN Fog type) 3770 Nos
XI. Single Suspension Fitting for Lynx
84 Sets.
552 Nos.
40 Nos.
15 Nos.
80 sets.
28 sets.
184 Nos.
19 No.
80 Nos.
Total of Item “C”
D
1-set
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
9) Temporary earthing device 1 No.
10) Multimeter, fluke, 8060 A or equivalent. 1 No.
Total of Item “D”
XII. Single Tension fitting for Lynx
XIII. Stock Bridge damper for Lynx
XIV. Mid Span joints for Lynx
XV. Repair sleeve for Lynx
XVI. Single Suspension fitting for earth
XVII. Single Tension fitting for Earth wire
XVIII. Stock Bridge damper for Earth Wire
XIX. Mid Span Joints for Earth Wire
XX. P.G Clamp for Lynx
Erection & Testing Equipment and Maintenance Tools
The Testing, Maintenance and erection equipment shall include the following compatible with the plant supplied in accordance with the technical provisions:
1) Set of wrenches
2) Digital phase angle meter
3) DC insulation Resistance tester(5000V)
4) Standard multi range multi meter with DC to AC current.
5) DC earth fault detector
6) Instruments transformers polarity testers.
7) Earth resistance testing set
8) Insulating oil dielectric testing set
Total of column No. 7 to be carried forward Schedule No. 5- Grand Summery
Schedule No. 2- Plant and Mandatory Spare Parts Supplied from within employers country
2:B Conversion from 66KV to 132KV (AIS) Grid Stations at Digri along with allied Transmission Line.
Sales Tax Total Price
6 7 = 5 + 6
Schedule No. 2- Plant and Mandatory Spare Parts Supplied from within employers country
2:C Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Jan Muhammad along with allied Transmission Line.
Item Description Qty
1 2 3 4
A132 KV EQUIPMENT
A-1 1 No.
A-2 3Nos.
A-3 3 -Sets
A-4 4-sets
A-5 2 sets
A-6 6 Nos.
A-7 3 Nos.
A-8 3 Nos.
A-9 11 KV Lightening Arrestors 3 Nos.
A-10 6 Sets
A-11 132 KV Steel Gantries
i) Beam 12 m 4 Nos
ii) Column 10+3.1 m 6 Nos.
iii) Earth Mast 13.1 m 01 No.
iv) Earthing Platform 8 Nos.
A-12 132 KV Substation Connectors
i) TMLH 6 Nos.
ii) TMHH 12 Nos.
iii) 90B 63F 03 Nos.
iv) TM 63 A 09 Nos.
Total of Item “A”
B 132 KV Control & Protection System
B-1 Control Panels:
EXW Unit Price1
132/11.5kV, 20/26 MVA, 3-phase power transformer complete with control cubicle, accessories, bushings with extended creepage distance and connectors.
145 kV single phase surge arrester substation class having an extended creepage distance with steel supporting structure complete with mounting arrangement.
132 kv, 40kA, 2000 Amps., 110V DC, 3-Pole Circuit Breakers with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132KV, 40 KA, 2000Amp, 3 Pole single throw Bus Disconnectors with Steel supporting structure and connectors.
132KV, 40 KA, 2000Amp, 3 Pole single throw Line Disconnectors with extended creepage connectors for 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40KA, Single Phase Current Transformer ratio 1200:600:300/5A (4 Core) Line CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132KV, 40 KA, Single Phase Current Transformer ratio 200:100/5 A (3 Core) Transformer CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel supporting structure and connectors.
132 kv, Voltage Transformers ratio 132 KV/√3/ 110/√3 S/ Phase two core with extended creepage distance including steel supporting structures, foundation bolts and terminal connectors for 600mm2 horizontal Aluminum Conductor.
132 KV tension string assemblies complete with hardware disc type strength 100 KN having 11 insulators per string complete with hardware as specified.
i) Line Control Panel CP-20 1 No
ii) Line Control Panel CP-30 1 No.
iii) Transformer Control Panel CP-50 1 No
B-2 Relay Panels:
i) Line Relay Panel RP-3 2 Nos.
ii) Transformer Relay Panel RP-4 1 No.
Total of Item “B”
C 132 KV Substation General Equipment
(Bidders to indicate quantities for satisfactory completion of work)
C-1 500Mtrs
ii) 11Kv Aluminium Pipes 63 mm dia ,4 m long. 3 Nos.
iii) Earth wire 7/3.0 (9mm dia.) 260 Mtrs
iv) Earth wire tension assemblies with G-clamps 12 Nos.
v) 11 KV post Insulator with clamp 3 Nos.
vi) Disc Insulator 80 KM 66 Nos.
vi) 11 KV structure. 1 No.
vii). SF6 Gas Cylinder 40 Kg 1 No.
C-2 Cables & accessories
a) 15 KV XLPE Power Cables along with termination Kits.
i) 1 core 1000 MCM 800Mtrs
ii) 1 core 500 MCM ----
iii) 3 core 4/0 AWG 120 sq mm 330Mtrs
iv) Indoor termination kit for 1000 MCM 09 Nos.
v) Indoor termination kit for 500MCM ---
vi)Indoor termination kit for 3 Core 4/0 AWG 8 Nos.
vii)Outdoor termination kit for 1000 MCM 09 Nos.
viii)Outdoor termination kit for 500 MCM ---
ix) Outdoor termination kit for 3 Core 4/0 AWG 6 Nos.
C-3 Control Cables:
i)Control Cable 4x2.5mm² 1650Mtrs
ii)Control Cable 8x2.5mm² 1500 Mtrs
iii)Control Cable 16x2.5mm² 1000 Mtrs
iv)Control Cable 4x6mm² 1550 Mtrs
v) Cable Trays, Racks, Supports, cables conduits etc. 1-Lot
C-4
2000Mtrs
45 Nos.
iii): Cartridges 1-Lot
Type A 150 Nos.
Type B 60 Nos.
Type C 45 Nos.
iv): Moulds with holding clamps.
Type A 03 Nos.
Type B 02 Nos.
Type C 02 Nos.
v): Grounding Connectors
Type I Nil
i) All Aluminum conductor 600mm²(Hawthorn)
Earthing Material Substation Grounding System for 132 kV switchyard and control house building.
i) 95mm² Copper conductor
ii) Earthing rod (16mm dia, 3m long)
Type II Nil
Type III Nil
C-5 Control house building lightning protection system 1-Lot
C-6 1-Lot
C-7 1-Lot
C-8 11 KV Panels
i) 11 KV incoming panel 25 KA, 2500A 1 No.
ii) 11 KV outgoing panel 25 KA, 630A 6 Nos.
C-9 Battery And Battery Charger:
i) Battery 110V DC, 150 AH 1-set
ii) Battery Charger 110V DC 1 No.
iii) AC/DC Station Auxiliary Panel 1 No.
iv)11/0.415 KV pad mounted Transformer, 200KVA with LT Cable 19/.083.1 No.
xvii) Marshalling Box for T/F Bay, Line Bay 3
xviii) Marshalling Box for PT Bay 1
C-10 110 V DC auxiliary services system as specified. 1-Lot
C-11 Fire fighting systems
5 Nos.
12 Nos.
C-12 Control Room Furniture
1 No.
1 No.
6 Nos.
6 Nos.
2 Nos.
f) Split Air conditioner 1.5tons 2 Nos.
g) Refrigerator 01 No.
C-13
43 Nos.
04 Nos.
03 Nos.
50 Sets
48.00 Km
16 Km
2380 Nos
129 Sets
72 Sets.
318 Nos.
22 Nos.
05 Nos.
43 sets.
09 sets.
98 Nos.
Switch yard lighting system 415/240V AC and & emergency lighting system 220V & 1 10VDC, power sockets including cabling etc as specified.
Control building electrification system 415/240V AC & emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified.
a) Mobile fire extinguisher for switchyard area
b) Fire extinguisher for control building (wall mounted)
a) Officer Table size 7’x4’
b) Supervisor Table size 5’x3’
c) Officer ‘s Chairs
d) Visitor’s Chairs
e) Notice Board size 6’x3½’
Material for 132 KV SDT Digri – Tando Jan Muhammad T/Line ( Feed for T.J. Muhammad Grid Station New) Length 15.70 Km)
I. Tower Type ZM1
II. Tower Type ZM30
III. Tower Type ZM60
IV. Grounding Sets
V. Lynx Conductor
VI. Earth Wire 9 mm
VII. Disc Insulators(80KN Fog type)
VIII. Single Suspension Fitting for Lynx
IX. Single Tension fitting for Lynx
X. Stock Bridge damper for Lynx
XI. Mid Span joints for Lynx
XII. Repair sleeve for Lynx
XIII. Single Suspension fitting for earth
XIV.
XV. Single Tension fitting for Earth wire
XVI. Stock Bridge damper for Earth Wire
10 No,
66 Nos.
Total of Item “C”
D Erection & Testing Equipment and Maintenance Tools
1-set
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
1 No.
9) Temporary earthing device 1 No.
10) Multimeter, fluke, 8060 A or equivalent. 1 No.
Total of Item “D”
XVII. Mid Span Joints for earth Wire
XVIII. P.G Clamp for Lynx
The Testing, Maintenance and erection equipment shall include the following compatible with the plant supplied in accordance with the technical provisions:
1) Set of wrenches
2) Digital phase angle meter
3) DC insulation Resistance tester(5000V)
4) Standard multi range multi meter with DC to AC current.
5) DC earth fault detector
6) Instruments transformers polarity testers.
7) Earth resistance testing set
8) Insulating oil dielectric testing set
Total of column No. 7 to be carried forward Schedule No. 5- Grand Summery
Schedule No. 2- Plant and Mandatory Spare Parts Supplied from within employers country
2:C Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Jan Muhammad along with allied Transmission Line.
Sales Tax Total Price
5 = 3 x4 6 7 = 5 + 6
Total EXW Price1
Schedule No. 3 - Design Services
3:A Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Ghulam Ali along with allied Transmission Line.
Item Description Qty.
1 2 3
Lot
2 No. Line Bays
1 No. Transformer Bay + 1 No. T/F
1 No. PT Bay.
TOTAL Columns 6 and 7 to be carried forward to Schedule No. 5. Grand Summary
Design of 132 kV, 40 kA AIS Grid Station having Single Bus-Bar, Single Breaker Scheme comprising the following along with allied transmission line
Design (as per NTDC spec.) of ControlHouseBuilding as per drawing ( out line) attached herewith complete in all aspects along with all allied facilities as per international practice, ready to use,
All equipment foundations outside the control house building as per scope in schedule 1 or 2, Interconnection of 132 kV overhead transmission line with line bay Isolator,
Interconnection arrangement of 11 kV out going panels with feeders,
Boundary wall , transformer way, switchyard trenches (if any), draw pit, switch yard gravel, earthing mash , gate, grid station lighting , lightening protection, etc.
(The soil bearing capacity to be considered for the civil works design is as per soil test results of Central Material Testing Laboratory (CMTL) Lahore or any other WAPDA approved Testing Laboratory).
Schedule No. 3 - Design Services
3:A Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Ghulam Ali along with allied Transmission Line.
4 5 6 = 3 x 4 7 = 3 x 5
TOTAL Columns 6 and 7 to be carried forward to Schedule No. 5. Grand Summary
Unit Price1 Total Price1
Local Currency Portion
Foreign Currency Portion
Local Currency Portion
Foreign Currency Portion
Schedule No. 3 - Design Services3-B: Conversion from 66KV to 132KV (AIS) Grid Stations at Digri along with allied Transmission Line.
Item Description Qty.
1 2 3 4
Lot
2 No. Line Bays
1 No. Transformer Bay + 1 No. T/F
1 No. PT Bay.
TOTAL Columns 6 and 7 to be carried forward to Schedule No. 5. Grand Summary
Unit Price1
Local Currency Portion
Design of 132 kV, 40 kA AIS Grid Station having Single Bus-Bar, Single Breaker Scheme comprising the following along with allied transmission line
Design (as per NTDC spec.) of ControlHouseBuilding as per drawing ( out line) attached herewith complete in all aspects along with all allied facilities as per international practice, ready to use,
All equipment foundations outside the control house building as per scope in schedule 1 or 2, Interconnection of 132 kV overhead transmission line with line bay Isolator,
Interconnection arrangement of 11 kV out going panels with feeders,Boundary wall , transformer way, switchyard trenches (if any), draw pit, switch yard gravel, earthing mash , gate, grid station lighting , lightening protection, etc.
(The soil bearing capacity to be considered for the civil works design is as per soil test results of Central Material Testing Laboratory (CMTL) Lahore or any other WAPDA approved Testing Laboratory).
Schedule No. 3 - Design Services3-B: Conversion from 66KV to 132KV (AIS) Grid Stations at Digri along with allied Transmission Line.
5 6 = 3 x 4 7 = 3 x 5
TOTAL Columns 6 and 7 to be carried forward to Schedule No. 5. Grand Summary
Unit Price1 Total Price1
Foreign Currency Portion
Local Currency Portion
Foreign Currency Portion
Schedule No. 3 - Design Services
Item Description Qty.
1 2 3 4 5 6 = 3 x 4
Lot
2 No. Line Bays
1 No. Transformer Bay + 1 No. T/F
1 No. PT Bay.
TOTAL Columns 6 and 7 to be carried forward to Schedule No. 5. Grand Summary
3-C: Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Jan Muhammad along with allied Transmission Line.
Unit Price1 Total Price1
Local Currency Portion
Foreign Currency Portion
Local Currency Portion
Design of 132 kV, 40 kA AIS Grid Station having Single Bus-Bar, Single Breaker Scheme comprising the following along with allied transmission line
Design (as per NTDC spec.) of ControlHouseBuilding as per drawing ( out line) attached herewith complete in all aspects along with all allied facilities as per international practice, ready to use,
All equipment foundations outside the control house building as per scope in schedule 1 or 2, Interconnection of 132 kV overhead transmission line with line bay Isolator,Interconnection arrangement of 11 kV out going panels with feeders,Boundary wall , transformer way, switchyard trenches (if any), draw pit, switch yard gravel, earthing mash , gate, grid station lighting , lightening protection, etc.
(The soil bearing capacity to be considered for the civil works design is as per soil test results of Central Material Testing Laboratory (CMTL) Lahore or any other WAPDA approved Testing Laboratory).
Schedule No. 3 - Design Services
7 = 3 x 5
3-C: Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Jan Muhammad along with allied Transmission
Total Price1
Foreign Currency Portion
Schedule No. 4 - Installation and Other Services4: A Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Ghulam Ali along with allied Transmission Line.
Item
Description
QtyUnit Price**
Local
1 2 3 4
Earthwork
E
Total Of Item “E”
F 132 KV Switch Yard Equipment Foundation
F-1
a) In ordinary soil. 1510 Cum
F-2
a) Ratio 1:4:8 144.925 cum
b) b) Ratio 1:2:4 110.5 cum
F-3
a) In 1:4 cement mortar 28.47 cum
b) In 1:5 cement mortar 95.943 cum
c) In 1:3 cement mortar 24.742 cum
F-4
a) 38 mm thick. 74.648 Sqm
F-4A 19.49 Cum
F4-B Supplying filling sand under floor & plugging in wells 350 Cum
F-5
a) Ratio 1:2:4 291.913 Cum
Currency Portion
Compaction of earthwork with power roller including ploughting mixing moistening earth to optimum moisture contents in layers etc complete.
a) 90% Maximum modified AASHTO dry density as per drawings and specifications.
Excavation in foundation of buildings,bridges and other structures including dag‑belling dressing refilling around structure with excavated earth watering and ramming lead upto 30 m and lift upto 1.5 m.
Cement concrete plain including placing compacting finishing and curing complete (including screening and washing of stone aggregate) with out shuttering.(using S.R cement)
Pacca brick work in other than building i/c striking of joints. .(using S.R cement)
Damp proof course with (cement sand and shingle concrete 1:2:4) including 2 coats of asphaltic mixture. .(using S.R cement)
Sub-base course of pit run gravel granuler placing, compacting to required chamber & gravel./
Reinforced cement concrete work using coarse sand including all labour and material except cost of steel reinforcement and its labour for bending and binding, which will be paid separately. This rate also includes all kinds of forms moulds; lifting shuttering, curing rendering and finishing the exposed surface (including screening and washing of shingle).
a) R.C work in roof slabs, beams, columns rafts, lintels and other structural member laid in situ or pre‑ cast laid in position complete in all respects.
F-6 16285.861 Kg
F-7 650.7 Cum
F-8 2702.35 Cum
F-9 2702.35 Cum
F-11 865.469 Sqm
F-12 199.25 Sqm
F-13 Erection and removal of centering 136.119 Sqm
F-14 65.844 per meter
a) 225 mm.
F-15 126 Each
F-16 216 Each
F-17 MS rail 132.6 Kg per meter (90-lbs per ft.) 12.19 per meter
11.02 Each
F-18 180 Each
F-19 98.68 Sqm
F-20 94.5 per meter
Supplying and fabrication of Intermediate grade deformed reinforcement of 40000 psi (276 Mpa) yield for R.C.C. in beams columns and pile caps, including utting,bending laying in position including cost of binding wire and removal of rust etc.
Filling watering and ramming earth under floor with surplus earth from foundations lead up to 31 meters and lift up to 1.50 meters.
Filling watering and ramming earth under floors with new earth (excavation from outside lead upto 30m and lift upto 1 .5m).
Carriage of 2.83 CUM/5 metric tons of all material like stone aggregate spawl, coal, lime, surkhietc.B.G.Rail fastening, bridge, girders, pipes, sheets, rails, M.S Bars or 1000 No. Bricks 254x 27x76mm or 1000 No. tiles 305x 152x 51 mm or 4.25 CUM of timber or 3.73 metric tons of fuel wood by truck or any other means owned by the contractor. Carriage or earth leads 4 K.M.
Cement plasters (1:5) up to 6.00 meter height 13 mm thick
Painting new surfaces, Preparing surface and painting of guard bars. Priming coat + two coats
P/Lowering & laying into trenches and jointing cement concrete reinforced pipeline to correct alignment & grade including cutting of pipes where necessary cost of jointing material & testing.
P/F MS dawel bars 16 mm dia and 1200 mm long complete as per drawing.
Making holes 457 mm deep in cement concrete or stone masonry and repairing 76 mm dia.
P/F switch yard gate 1.5 inch GI and GIwire 8 mesh 2” x 2” complete with railfixing in position as per drawing (vettedrate)
Fixing in position of foundation bolts dulyassembled in template which will beprovided by the contactor
S/erection in position Precast/pre-stressed RCC trench covers from Izhar concrete Pvt Ltd. Sheikhupura road Lahore to site ratevetted by Manager Civil NTDC LahoreNo. 285 dated 04-04-2006.
Filling expansion joint 13 mm thick for102 to 152 mm deep slab with bitumenmixed with sand and saw dust
F-21 618.479 Sqm
F-22 98 Each
F-23 25 Each
F-24 58 Each
F-25 78 No.
F-26 185 per meter
F-27 210.25 Sqm
F-28 Making groves 25x13mm 634 Each
F-29 435 Cum
F-30 White washing 3-coats 641.28 Sqm
F-31 Dressing of banks or ground surface 641.28 Sqm
F-32 Dismantling of brick work in cement mortor 25.15 Cum
F-33 Dismantling ofcement concrete plain
1:04:08 4.095 /Cum
1:02:04 1.566 /Cum
F-34 14.49 /Sqm
F-35 Dismantlling of wire netting tennis court & frame work 47.125 /Sqm
Total Of Item “F”
G ControlHouseBuilding
355 Cum
a) Ratio 1:4:8 116.609 Cum
b) Ratio 1:3:6 11.85 cum
c) Ratio 1:2:4 17.315. cum
3) Pacca brick work in foundation and plinth.
Coal tar painting laid hot first and secondCoat
P/F cable tray 2 way of GI angle iron I/Canchor bolts fixing in cable trench x ½.
P/F cable tray 3 way of GI angle iron I/Canchor bolts fixing in cable trench
P/Fixing GI earth strip 1.25” x 0.125” forswitch yard fencing frame with allied bolts, nuts as per drawing No. PDW/TS-786.
P/fixing GI angle iron post 50x50x6mm forbarbed wire fencing around switch yard dulyfixed in position as per drawing No. PDW/TB 126. post length 0.70 Mtr.
P/fixing 4 rows barbed wire fencing aroundswitch yard G.I barbed wire 14 SWG,2-Ply, 4 points fixed on GI angle iron post (excluding
P/fixing of switching yard fencing frames asper drawing No. PDW/TS-786 except earthstrip etc. Rate vetted CE(T&G) WAPDALahore.
Supply and spreading of crush stone / waterborn gravel of 11/2 inch size.
Dismantling of D.P.C of cement concrete 40mm thick & cleaning the site etc:
1) Excavation in foundation of buildings,bridges and other structures including dag‑belling dressing refilling around structure with excavated earth watering and ramming lead upto 30 m and lift upto 1.5 m. a) In ordinary soil.
2) Cement concrete plain including placing (including screening and washing of stone aggregate) with out shuttering.
a) In 1:6 cement mortar 112.483 Cum
b) In 1:5 cement mortar 95.943 cum
c) In 1:3 cement mortar 24.742 cum
80 Sqm
75.8 cum
597.332 Sqm
a) 1:6 C.M. 110.244 cum
b) 1:4 C.M. 16.5 cum
140.703 cum
9560 Kg
280.45 Sqm
360.49 Sqm
280.45 Sqm
110.57 Cum
1350 /Sqm
4) Damp proof course with (cement sand and shingle concrete 1:2:4) including 2 coats of asphaltic mixture.38 mm thick.
Sub base course of pit run grand granular material (including placing, mixing and comparting required cambring and grade)
5) Vertical damp proof course of 19 mm hick cement plaster 1:2 with bitumen at 1 kg per sq m.
6) Pacca brick work in ground floor (including striking of joints).
7) Reinforced cement concrete work using coarse sand including all labour and material except cost of steel reinforcement and its labour for bending and binding, which will be paid separately. This rate also includes all kinds of forms moulds; lifting shuttering, curing rendering and finishing the exposed surface (including screening and washing of shingle).a) R.C work in roof slabs, beams, columnsrafts, lintels and other structural member
a) Ratio 1:2:4.(Precast)c) Errection in poison RCC (Precast)
8) Supplying and fabrication of Intermediategrade deformed reinforcement of 40000 psi(276Mpa) yield for R.C.C.in beams columns and pile caps, including cutting, bending laying in position including cost of binding wire and removal of rust etc.
9) Single layer of burnt clay tiles 229x1 14x38 mm laid over 100mm earth & 25mm mud plaster without bhoosa grouted with cement sand 1:3 on top of R.C.C roof slab provided with 1.66 kg bitumen coating sand blinded.
10) Polythine sheet 0.2 mm thick laid overTwo coatsof bitumenusing1.66kg.bitumen hot per sq.m over floors & DPCetc. Two coats of bitumen laid hot using1.66 kg. per Sq.m over roof & blinded withsand at 0.003 cum per Sq. m.
11) Providing and laying thermo pore sheet 38 mm thick.
12) Filling watering and ramming earth underfloor with surplus earth from foundationslead up to 31 meters and lift up to 1.50meters.
13) Filling watering and ramming earth underfloors with new earth (excavation fromoutside lead upto 30m and lift upto 1.5m
14) P/F steel doors w/o grill on outer face 6.525 Sqm
1350 Cum
530 cum
170.8 Sqm
58.9 Sqm
32.913 Sqm
20) Glass strips for dividing and flooring into panels.
i) 40 mm wide glass strips. 560.75 R.M
ii) 75 mm wide glass strips. 80 R.M
iii) 25 mm wide glass strips - R.M
280.85 Sqm
89.472 Sqm
177.889 Sqm
24) Cement pointing struck joints on walls.
a) Ratio 1:2. 210 Sqm
25) Khuras on roof (610x610x1 50mm) 4 Each
a) 100 mm dia.. 25.968 /R.M
8.5 RM
4 Nos.
8 Nos.
29) Providing and fixing 16 mm dia bar Hook for fan.. 4 Nos.
50 Sqm
10.629 Sqm
15) Carriage of 2.83 CUM/5 metric tons of all material like stone aggregat spaw coal,lime, surkhi etc. B.G. Rail fastening, bridge,girders, pipes, sheets, rails, M.S Bars or 1000 No. Bricks 254x 127x76mm or 1000 No. tiles 305x 152x 51 mm or 4.25 CUM of timber or 3.73 metric tons of fuel wood by truck or any other means owned by the contractor. Carriage or earth leads 4 K.M.
16) Supply and filling sand under floors or plugging in wells.
17) Mosaic flooring consisting of mosaic topping of one part of cement to two parts of marble chips laid over 38 mm thick flooring of 1:2:4 cement concrete including rubbing and polishing complete. 13 mm thick mosaic topping (with grey cement).
18) Brick on edge flooring laid in 1:6 cement mortar over a bed of 20 mm thick 1:6 cement mortar.
19) Mosaic dado or skirting with one part of cement & 2 parts or marble chips laid over 13 mm thick cement plaster 1:3 complete with finishing and polishing. 10 mm thick (with grey cement).
21) Cement plasters (1:5) up to 6.00 meter height 13 mm thick
22) Cement plasters (1:4) up to 6.00 meter height 13 mm thick.
23) Cement plasters (1:3) up to 6.00 meter height 13 mm thick
26) Cast iron rain water down pipe fixed is place excluding head and shoes but includingclamps etc. a) 100 mm dia
P/Fixing steel ladder for over head tank made of angle iron 50x50x6mm complete in all respect.
27) Rain water down pipe cast iron heads fixed in place including cost of clamps hold fast and painting 100 mm dia C.I heads.
28) Shoes, bends or off sets for cast iron rain water down pipe including fixing and painting
30) Double layer of building paper laid over 2‑coats of hot bitumen PB-3 or PB-4 for floors etc using 1.66 kg bitumen/Sqm.
31) P/f aluminum natural anodized open able double leaf door hinged without glazing
30.55 Sqm
33) Providing and fixing Door lock natural anodized.. 4 Each
3 Each
1 Each
35.75 Sqm
21.5 Sqm
5 Sqm
5.6 Rmt
40) White washing three coats. 1093.826 Sqm
13.125 Sqm
78.9 Sqm
43) Distempering Three coats I/c cost of priming coat 1748.65 Sqm
46) Eraction and removal of centering 136.119 Sqm
1:04:08 6 Each
56 Each
74.493 Sqm
46).Dismantling of brick work in cement mortor 29.48 /Cum
47).Dismantling of cement conceret 1:4:8 4.864 /Cum
1.65 /Cum
Total Of Item “G”
H
a) 150 mm 48 per meter
b) 225 mm 25.245 per meter
32) P/f aluminum natural anodized open able window hinged without glazing
34) P/f aluminum door closer (single action natural anodized.
35) P/f aluminum door closer (Double action natural anodized.
36) Glazing with plate glass 6 mm thick using PVC Gas Kit.
37) P/F platform of 40 x 4mm G I strap Flatand bottom or G I tee iron. 50x100x6mm1750mm long fixed in position complete in allrespects as perdrawing No. PDW/TB-626.
38) P/f MS Plate 14 Swg Size 600mm (Trenchcover) including welded with MS angle iron25 x 25 x 3mm fixed in position as perdrawing No. PDW/TB-625
39) P/F steel frame for door of MS angle iron51x51x5 mm MS flat 64x5 mm and MS strap51x25 mm.
41) Painting new surfaces, Preparing surface and painting of doors and window any type (including edges). Priming coat + two coats.
42) Topping of cement concrete1:2:4 including surface finishing and dividing into panels 40mm thick.
44) Bottom Khura of Brick masonry in cement sand mortar (1:6) 1.20 x 0.61 x 0.115 Mtr. Over 76mm cement concrete
45) P/f MS Channel 40 x 75 mm 300mm Long including grounding bolt size 12mm Dia 230mmlong as per drawing No. PDW/TR-525 (vetted rate)
45) Preparing surface and applying of acid resistance paint (vetted rate)
48).Dismantling of cement concrete reinforced in separating reinforcement from concrete cleaning &straighting the site
WATER SUPPLY, SANITARY ANDSEWERAGE/DRAINAGE WORKS.
01) P/Lowering & laying into trenches and jointing cement concret reinforced pipeline to correct alignment &grade including cutting of pipes where necessary cost of jointing material & testing.
02) Providing, laying, jointing & testing heavy water or steam quality G.I or W.I pipes and specials inside buildings & trenches.
a) 13 mm i/d. 16 per meter
b) 20 mm i/d. 22.241 per meter
c) 50 mm i/d. 20.3
a. 20mm i/d. 1 Each
2 Each
2 Each
a. 100mm i/d. 23 per meter
07) C.I soil specials with cement joints (1:2).
a. 100mm i/d. 12 Each
08) C.I manhole covers with frames:
a. 300mm i/d light. 1 Each
b. 450mm i/d light. 2 Each
09) S. Trap 102mm i/d China ware (Pakistan made). 1 Each
1 Each
1 Each
12) C.P bib tap 13mm dia 2 Each
13) C.P stop cocks 13mm dia 3 Each
14) 13mm x 100mm C.P shower rose 1 Each
1 Each
16) PVC flushing pipe 32mm dia. 1 Each
17) PVC flushing bend 32mm dia.. 1 Each
18) C.P waste coupling 40mm dia. 1 Each
19) Waste pipe for sinks & urinals 40mm dia PVC 2 Each
20) Connections 13mm dia (PVC) 2 Each
21) Providing and fixing 32 mm dia rubber chain plug. 1 Each
1 Each
1 Each
03) P/F hard brass or gun metal peet value heavy pattern with hand wheel on G.I or W.I pipe lines laid in the ground or inside buildings.
04)100mm i/d gully trap of cement concrete (including 305mmx 305mm masonry chamber and C.I grating 150 mm x 150 mm).
05) Floor Trap 100mm x 50mm (including 50mm concrete chamber all round).With C.I grating.
06) Providing and fixing C.I soil pipes with cement joints (1:2).
10) White glazed earthenware water closet squatting Orissa pattern type domestic of best quality.
11) 13.5 liters capacity low level flushing cistern best quality.
15) Chromium plated towel rail / ring. Rail 61 0mmx20mm.
22) Providing and fixing looking glass 560 x 405 mm size first quality without frame(PAK made)
23) Construction of sluice valve or fire hydrant chamber 61 0x61 0mm minimum size 230mm thick brick work 1:5 cement sand mortar, 114mm thick 1:6:12 cement concrete in foundation 50mm thick 1:2:4 cement concrete in bed, 75mm 1:2:4 RCC slab on top and 13mm thick 1:3 cement sand plaster inside
1 Each
1 Each
25). P/Fixing C.P Pillar Cock 1 Each
26).P/Fixing soap dish Chromium plated 1 Each
1 Each
Total Of Item “H”
I C.H.B ELECTRICAL WORKS
40 /Point
3 /Point
110 per meter
95 per meter
8 per meter
280 per meter
2 Each
1 Each
4 Each
2 Each
2 Each
2 Each
24) Glass shelves 610 x 125 mm size with CP bracket with CP railing
25) White glazed earthen ware wash hand basin domestic of supreme quality 65 cm.
27) White glazed earthen ware edestal for wash hand basin domestic of supreme quality.
01) Wiring light or fan points with1/1.13(3.029) steel insulated wire in 20mm (3/4”) steel conduit 62 mm gauge recessed in wall or column complete with witch, ceiling rose/button holder etc.
02) Wiring 3/5-pin 5 Amp. Wall socket point with 1.13(3/0.029) PVC insulated wire with 2.5 mm PVC insulated earthing conductor in MS conduit 19.1 mm dia recessed in the wall or column complete with the switch socket combined
03) Wiring mains with 2-1/7/1.35 (7.044) PVC insulated wire in 19.1 mm 16 SWG (1.62 mm) steel conduits recessed in wall as required including all accessories.
04) Wiring mains with 4-1/7/1.04 (7/.044) PVC insulated wire 660 volts grade in 25.4 mm 16 SWG steel conduit recessed in the wall as required including all accessories.
05) Wiring mains with 2-1/1.78 (7.029) PVC insulated wire in 19.1 mm 16 SWG (1.62 m) steel conduits recessed in wall as required including all accessories.
06) Providing/laying and connecting hard drawn bare copper wire 3.2 mm2 (14 SWG) as earth continuity conductor with any given main or sub-main in all system of wiring.
07) Providing & fixing flush type 3-pn 15‑Amp S/Phase plug socket switch (combined) as replacement on board already exist
08) Providing & fixing of distribution board 100 Amp 400-v 10 way per phase with 01-No I/C circuit Breaker 100 Amps.T.P. and outgoing circuit breaker 6-30 Amps complete with volt meter selector switch phase indication light and neutral link etc. recessed in wall
09) Supply and erection of ceiling fan best quality Pak made including wiring of down rod with 1/1.13 mm (3/.029) PVC wire fixing of regulator blade canopy etc. Size 56”
10) Providing and supplying of ACSP exhaust fan 457mm (18” sweep complete with regulator)
11) Erection of Exhaust fans of all sized in the opening already exist
12) Providing and erection butterfly shutter for 457mm (18”)sweep exhaust fan complete as required
6 Each
4 Each
3 Each
2 Each
20 Each
Total Of Item “I”
J STREET & SWITCH YARD LIGHTING
48.134 Cum
5.75 Cum
40.8 Sqm
345 per meter
158 per meter
128 per meter
50 per meter
210 per meter
3 Each
6 Each
1 Each
6 Each
5 Each
13) Providing and fixing B.C Bakelite’s button lamp holder with 200mm white glass globe and gallery etc
14) Providing and fixing milled steel bar fan clamp 13 mm dia suitable for RCC Roof
15) Providing and fixing emergency fitting (D.C) light 1x100 watt (incandescent C.H.B)
16) Providing & fixing 3-phase 4-pin water proof socket imported 415-volts 30 Amp including base complete in all respect as per drawing.
17) Providing and fixing fluorescent tube light approved Philips button light 1 x 40 watts complete with choke starter pre‑ wired internal connection complete.
01) Excavation in foundation of buildings, bridges and other structures including dag‑belling dressing refilling around structure with excavated earth watering and ramming lead up to 30 m and lift up to 1.5 m. a) In ordinary soil.
02) Cement concrete plain i/c placing, compaction finishing and curing complete (including screening and washing stone aggregate without shuttering Ratio 1:2:4)
03) Erection and removal or centering for R.C.C. of plain cement concrete (Vertical)
04) Wiring with 2-1/1.178 (7/.029) PVC Insulated wire in20mm (3/4”) PVC condition recessed in the wall as required
05) Wiring with 2-1/7/.085(7/.036) PVC insulated wire in 25mm (1”) conduit recessed in the wall as Required
05) Wiring with 4-17/.085 (7.03 6) PVC insulation wire 660 volts grade in 25mm(1) G.I pipe on surface.
06) Wiring with 4-17/1.35(7.052) PVC insulated wire 660 Volts grade in 25mm (1) G. Pipe on surface
07) Wiring with 4-17/1.35(7.052) PVC insulated wire 660 volts grade in 30mm (1‑ 1/4”) PVC conduit on surface
08) P/F power socket out let 30 AMP 500 Volts grade 4 pin water proof CEC make complete in all respect rate vetted by CENTDC Lahore No. 19816 dated, 13-04-2004.
09) Switch A.C one way S.P 15 Amps with side operating fixed Handle
10) Provide fixing of distribution board three phase 400Vots .3 Way per phase with one IC circuit breaker 30Amp. T.P. And out going breaker 6-30 Amp. Complete with N link in Wall recessed.
11) Providing Fixing T.P & NLIC switch 600 volts grade rewire able Type (60 amps)
12) Providing and installation of weather proof light beam flood lighting type N.VM with 100 watt incandescent lamp Holder + Lamp base – plate + Pitch block + glass cover Rate vetted by C.E (GSC) Lahore No. 689-90 dated 23- 07‑1998.
24 Each
23.5 Cum
1 Each
70 Mtr.
1580 /Mtr
2 Each
19) P/F 250-W mercury flourcent lamp philiphs made 3 Each
Total Of Item “J”
K
1) 132 KV Equipment
1 Job
3 Jobs
3 Jobs
4 Jobs
2 Jobs
6 Jobs
3 Jobs
13) P/Installation of switch yard light Philips make type HAV 511/250 watts with chow, capacitor Mercury Vapour fluorescent lamp i/c cover and all accessories with out pipe fitting vetted rate C.E. (GSC) North Lahore No. 689‑ 90 dated 23-07-1998.
14) Filling watering and ramming earth under floors with surplus earth from foundation lead up to 31 m and lift up to 1 .5m
15) TP & NLIC switch fuse 500 volts graderewire able type (30 amps)
16) PVC (Shavyl) Pipe “D” class 4” (100ml) P‑22-6/103mm
17). P/L &connecting hard drawn copper wire 2.06mm as earth continuity conductor wih any given main or sub main in all msystem of wiring
18).P/F 220KV DC 250-W indicent lamp phliphs make NV-15 (flood light)
ERECTION WORK (Including Testing and Commissioning)
a) Assembly, erection, oil dehydration and neutral grounding arrangement complete of 132/11.5 KV, 20/26 MVA 50 Hz, 1 0%Impedance, Vector DYN1 1, On Load Tap Changer, three phase transformers with all accessories and associated work including the supply of requisite materials, complete as per details given in the specifications and drawings.
b) 145 KV Metal Oxide (Gapless) Lightening Arrestors with Steel Supporting structure and connectors.
c) 132KV, 40KA, 2000Amp, 110 Volt 3 Pole SF-6 Circuit Breaker with Steel Supporting Structure and connectors.
d) 132KV, 20KA, 1600Amp, 3 Pole single throw Bus Disconnectors with Steel Supporting Structure and connectors.
e) 132KV, 40KA, 2000Amp, 3 Pole single throw Line Disconnectors with extended creepage connectors for 600mmSq. Horizontal Aluminum Conductor with Steel Supporting Structure and connectors.
f) 132KV, 40KA, Single Phase Current Transformer ratio 1200:600:300/5 A (4 Core) Line CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel Supporting Structure and connectors
g) 132KV, 40KA, Single Phase Current Transformer ratio 200:100/5 A (3 Core) Transformer CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel Supporting Structure and connectors
3 Jobs
i) 11 KV Lightening Arrestors 3 Jobs
6 Jobs
132 KV Steel Gantries
4 Jobs
6 Jobs
1 Each
8 Jobs
132 KV Substation Connectors
6 Nos
12 Nos
3 Nos
9 Nos
2)132 KV Control & Protection System
Control Panels:
1 Jobs
1 Jobs
1 Jobs
i): Line Rely Panel RP-3 2 Jobs
ii)Transformer relay panel RP-4 1 Jobs
3) 132 KV Substation General Equipment
i): All Aluminum conductor 600mm² (Hawthorn) 500 Mtrs
ii) 11 KV Al pipes 63mm dia 4m long. 3 Each
iii) Earth wire 7/3.0 (9mm dia) 260 Mtrs
iv): Earth wire tension assemblies with G-clamps 12 Each
v) 11 KV post insulator with clamp. 3 Each
1 Job
8 Jobs
Cables & accessories
15 KV XLPE Power Cables along with terminations
i) 1 core 1000 MCM 800 Mtrs
ii) 3 core 4/0 AWG 120 sq. mm 330 Mtrs
Control Cables:
1550 Mtrs
1300 Mtrs
950 Mtrs
1450 Mtrs
CableTrays, Racks, Supports, cables conduits etc. 1 Lot
Earthing Material
h) 132KV, Voltage Transformer PT’s Ratio132 KV/√3/ 110/√3 Volt single Pole with Steel Supporting Structure and connectors.
j) 132 KV tension string assemblies complete with hardware disc type strength 100 KN having 8 insulators per string complete with hardware as specified.
i) Beam 12m
ii) Column 10+3.1m
iii) Earth Mast 13.1m
iv) Earthing Platform
i) TMLH
ii) TMHH
iii) 90B63F
iv) TM63A
I. Line Control Panel with PT, CP-20
II. Line Control Panel with PT, CP-30
III. Transformer Control Panel CP-50
Relay Panels:
(Bidders to indicate quantities for satisfactory completion of work)
v) 11 KV structure
vi) Earthing platform
i) Control Cable 4x2.5mm²
ii) Control Cable 8x2.5mm²
iii) Control Cable 16x2.5mm²
iv) Control Cable 4x6mm²
Substation Grounding System for 132 kV switchyard and control house building.
i): 95mm² Copper conductor 2000 Mtrs
ii): Earthing rod (16mm dia, 3m long) 45 Each
iii): Cartridges
Type A 150 Each
Type B 60 Each
Type C 45 Each
iv): Moulds with holding clamps.
Type A 3
Type B 2
Type C 2
v): Grounding Connectors
Type I Nil
Type II Nil
Type III Nil
Control house building lightning protection system.
1 Lot
1 Lot
11 KV Panels
i): 11 KV incoming panel 25 KA, 2500A 1 Job
ii): 11 KV outgoing panel 25 KA, 630A 6 Job
1 set
1 Job
1 Job
1 Job
1 Lot
Fire fighting systems
a) Mobile fire extinguisher for switchyard area 5 Jobs
b) Fire extinguisher for control building (wall mounted) 5 Jobs
c) Control Room 12 Jobs
Air-conditioner 18000 BTU Window Type 2 Jobs
Total of Item “K”
L COST OF CIVIL / ELECTRIC WORKS
L-1 Tower Foundation at 20/15 degree
Switch yard lighting system 415/240V AC and emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified
Control building electrification system 415/240V AC & emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified.
Battery And Battery Charger:
i) Battery 110V DC, 150 AH
ii) Battery Charger 110V DC
iii) AC/DC Station Auxiliary Panel
iv) 11/0.415 KV pad mounted transformer, 200KVA with LT Cable 19/.083
v) 110 V DC auxiliary services system as specified.
Total of Column No. 6 & 7 to be carried forward to Schedule No.4 for Grand Summary.
132 KV SDT Matli – TandoGhulam Ali T/Line (Feed for TandoGhulam Ali Grid Station New) Length 30.15 Km
i. 360 footing
ii. 4 footing
iii. 24 footing
iv. 16 footing
v. 4 footing
vi. 4 footing
vii. 4 footing
2 Installation of grounding set 107
L-2 Tower Type Pile Foundation
ZM1, ZM 1+3, ZM 1+6= 1 No.
ZM30, ZM30+3, = 1 No.
ZM60, ZM60+3 = 1No.
DWG: PDW/TC/902i. Pile Work, 600 mm dia.
168 Mtrs
ii. RCC Concrete
18.3 Cum
iii. Steel
Construction of the tower foundation of the following type of tower in water logged/normal soil area using S.R cement crush stone size ½” to ¾” hill sand concreting complete i/c excavation in varied type of soil, open dewatering if required, stub setting, providing steel former as per approved design concrete mix ratio with mixture machine, concrete mix ratio 1:2:4 curing back filling compacting and also cylinder cube test up to the strength 21N/mm² (3000 PSI) at 28 days curing.
Tower Type ZM1, ZM1+3 at 20 degree angle of repose as per drawing No. PDW/TC-198
Tower type ZM1+6 at 20 degree angle repose as per drawing No. PDW/TC-198
Tower Type ZM30, ZM30+3 at 20 degree angle of repose as per drawing No. PDW/TC-199
Tower type ZM60 at 20 degree angle repose as per drawing No. PDW/TC-200
Tower type ZM1, ZM1+3, ZM1+6 at 15 degree angle of repose as per drawing no. PDW/TC-440
Tower type ZM30, ZM30+3, at 15 degree angle of repose as per drawing no. PDW/TC-441
Tower type ZM60, ZM60+3, at 15 degree angle of repose as per drawing no. PDW/TC-442
Providing & Casting in Situ Bored RCC Pile in 1:1-1/2:3 (Cement concrete of approved crushed stone & coarse sand placed in nominal dia I/C all costs boring drilling with rotary, reserved rotary or any approved method, placing concrete with tremie& excluding cost of supply an fabrication of steel bars reinforcement cage, which shall be paid separately including washing of shingle. (WCSR-2013, page: 5-2, item No.4 (ii).
Reinforced cement concrete work using coarse sand except the cost of concrete of steel reinforcement and its labour for bending and binding. This rates also includes all kinds of forms moulds, lifting shuttering, curring, rendering and finishing the exposed surfaced (including screening and washing of shingle) a) In-situ in roof slabs, column, beam, rafts lintels and other structural member complete in all respect WCSR-2013, page 5-1,2, item No.3-a,(ii)
13873 Kg
iv. Cost of Difference of S.R Cement
530 Bags
S.R Cement 1 Bag @ 446.00
O.P Cement 1 Bag @ 468.00
Difference 22.00
Total Cost of L = L1 + L2
M Tower Erection
Tower Type ZM1 86 Nos.
Tower Type ZM1+3 5 Nos.
Tower Type ZM1+6 2 Nos.
Tower Type ZM30 7 Nos.
Tower Type ZM30+3 1 Nos.
Tower Type ZM60 5 Nos.
Tower Type ZM60+3 1 Nos.
Total of Item QN Electric Welding
Tower Type ZM1 /160 /tower 13760 Nos.
Tower Type ZM1+3 /260 /tower 1300 Nos.
Tower Type ZM1+6 /310 /tower 620 . Nos.
Tower Type ZM30 /370 /tower 2590 . Nos.
Tower Type ZM30+3 /450 /tower 450 . Nos.
Tower Type ZM60 /392 /tower 1960 Nos.
Tower Type ZM60+3 /545 /tower 545 Nos.
Total Nuts & Bolts 21225 Nos.
Total of Item RO Stringing Work
30.15 KM
Total of Item S
Total Cost of L+M+N+O
Abstract of cost of Part L-3
Jungle Clearance
N/A
P
Supply & Fabrication of intermediate grade deformed reinforcement for RCC Piles i/C Cutting banding, laying in position welding and fastening i/c cost of binding wire and removal of rust etc (a) 40,000 PSI (276 MPA) Yield. WCSR-2013, page: 5-3, item-7 (a)
(WCSR-2013 Page: 22-4, Item No.16, & page: 22-16 Item no. 649)
Transportation of material from site store to location and erection of D/C type tower installation of ACD, Sign plate barbed wire and complete in all respect for following type of towers:
Electric welding nuts & bolts on erected towers up to 6-meters and applying paint on welded nuts & bolts:
The stringing/sagging according to Wapda standard 03-No. conductor type ACSR Lynx conductor and 01-No. shield wire i/c installation of assemblies, hardware, SB dumper for lynx & earth wire, insulator, joints, dead end bodies and jumpering (where required) testing and commissioning complete
1. Jungle clearance and removing with 30 mater (site clearance for demarcation) (WS-2008, P/20-2, 1/14 (a)Environmental and Social Mitigation & monitoring costs
(A) Air Quality Monitoring/ Analysis 6 Nos(B) Water Quality Monitoring/ Analysis 12 Nos(C) Water Consumption Monitoring/ Analysis Daily Basis
(D) Noise Monitoring/ Analysis/ Measurement Daily Basis
(E) Solid Waste & Waste water Management 1 Location
(F) Lumpsum
Total of Item “P”
Other Environmental & Social Mitigation Measures (as per attached EMP)
Total of Column No. 6 & 7 to be carried forward to Schedule No.4 for Grand Summary.
Schedule No. 4 - Installation and Other Services4: A Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Ghulam Ali along with allied Transmission Line.
Unit Price** Total Price**
Foreign Local Foreign
Currency Portion
5 6=3x4 7=3x5
Currency Portion
Currency Portion
Schedule No. 4 - Installation and Other Services
4-B: Conversion from 66KV to 132KV (AIS) Grid Stations at Digri along with allied Transmission Line.
Item
Description
Qty
1 2 3
E Earthwork
1 Job
Total Of Item “E”
F 132 KV Switch Yard Equipment
Foundation
F-1
a) In ordinary soil. 1510 cum
F-2
a) Ratio 1:4:8 148.5 cum
b) b) Ratio 1:2:4 130.5 cum
F-3
a) In 1:4 cement mortar 28.47 cum
b) In 1:5 cement mortar 95.943 cum
c) In 1:3 cement mortar 24.742 cum
F-4
a) 38 mm thick. 74.648 Sqm
F-4A 19.49 Cum
F4-B Supplying filling sand under floor & plugging in wells 350 Cum
F-5
Compaction of earthwork with power roller including ploughting mixing moistening earth to optimum moisture contents in layers etc complete
a) 90% Maximum modified AASHTO dry density as per drawings and specifications.
Excavation in foundation of buildings,bridges and other structures including dag‑belling dressing refilling around structure with excavated earth watering and ramming lead upto 30 m and lift upto 1.5 m.
Cement concrete plain including placing compacting finishing and curing complete (including screening and washing of stone aggregate) with out shuttering.(using S.R cement)
Pacca brick work in other than building i/c striking of joints. .(using S.R cement)
Damp proof course with (cement sand and shingle concrete 1:2:4) including 2 coats of asphaltic mixture. .(using S.R cement)
Sub-base course of pit run gravel granuler placing, compacting to required chamber & gravel./
Reinforced cement concrete work using coarse sand including all labour and material except cost of steel reinforcement and its labour for bending and binding, which will be paid separately. This rate also includes all kinds of forms moulds;lifting shuttering, curing rendering and finishing the exposed surface (including screening and washing of shingle).
a) Ratio 1:2:4 291.913 cum
F-6 16285.861 Kg
F-7 650.7 cum
F-8 2702.35 Cum
F-9 2702.35 Cum
F-11 865.469 Sqm
F-12 199.25 Sqm
F-13 Erection and removal of centering 136.119 Sqm
F-14
a) 225 mm. 65.844 per meter
F-15 126 Each
F-16 216 Each
F-17 MS rail 132.6 Kg per meter (90-lbs per ft.) 12.19 per meter
11.02 Each
F-18 180 Each
F-19 98.68 Sqm
F-20 94.5 per meter
a) R.C work in roof slabs, beams,columns rafts, lintels and other structural member laid in situ or pre‑cast laid in position complete in all respects
Supplying and fabrication of Intermediate grade deformed reinforcement of 40000 psi (276 Mpa) yield for R.C.C. in beams columns and pile caps, including utting,bending laying in position including cost of binding wire and removal of rust etc.
Filling watering and ramming earth under floor with surplus earth from foundations lead up to 31 meters and lift up to 1.50 meters.
Filling watering and ramming earth under floors with new earth (excavation from outside lead upto 30m and lift upto 1 .5m).
Carriage of 2.83 CUM/5 metric tons of all material like stone aggregate spawl, coal, lime, surkhietc.B.G.Rail fastening, bridge, girders, pipes, sheets, rails, M.S Bars or 1000 No. Bricks 254x 27x76mm or 1000 No. tiles 305x 152x 51 mm or 4.25 CUM of timber or 3.73 metric tons of fuel wood by truck or any other means owned by the contractor. Carriage or earth leads 4 K.M.
Cement plasters (1:5) up to 6.00 meter height 13 mm thick
Painting new surfaces, Preparing surface and painting of guard bars. Priming coat + two coats.
P/Lowering & laying into trenches and jointing cement concrete reinforced pipeline to correct alignment & grade including cutting of pipes where necessary cost of jointing material & testing.
P/F MS dawel bars 16 mm dia and 1200mm long complete as per drawing.
Making holes 457 mm deep in cement concrete or stone masonry and repairing 76 mm dia.
P/F switch yard gate 1.5 inch GI and GI wire 8 mesh 2” x 2” complete with rail fixing in position as per drawing (vetted rate)
Fixing in position of foundation bolts duly assembled in template which will be provided by the contactor
S/erection in position Precast/pre-stressed RCC trench covers from Izhar concrete Pvt Ltd. Sheikhupura road Lahore to site rate vetted by Manager Civil NTDC Lahore No. 285 dated 04-04-2006.
Filling expansion joint 13 mm thick for 102 to 152 mm deep slab with bitumen mixed with sand and saw dust
F-21 618.479 Sqm
F-22 98 Each
F-23 75 Each
F-24 58 Each
F-25 78 No.
F-26 185 per meter
F-27 210.25 Sqm
F-28 Making groves 25x13mm 634 Each
F-29 435 Cum
F-30 White washing 3-coats 641.28 Sqm
F-31 Dressing of banks or ground surface 520.28 Sqm
F-32 Dismantling of brick work in cement mortor 25.15 Cum
F-33 Dismantling ofcement concrete plain
1:04:08 4.095 /Cum
1:02:04 0.566 /Cum
F-34 14.49 /Sqm
F-35 Dismantlling of wire netting tennis court & frame work 47.125 /Sqm
Total Of Item “F”G Control House Building
236.248 Cum
a) Ratio 1:4:8 116.609 Cumb) Ratio 1:3:6 11.85 cumc) Ratio 1:2:4 17.315 cum
3) Pacca brick work in foundation and plinth.
a) In 1:6 cement mortar 112.483 Cum
Coal tar painting laid hot first and secondCoat
P/F cable tray 2 way of GI angle iron I/C anchor bolts fixing in cable trench x ½.
P/F cable tray 3 way of GI angle iron I/C anchor bolts fixing in cable trench
P/Fixing GI earth strip 1.25” x 0.125” for switch yard fencing frame with allied bolts, nuts as per drawing No. PDW/TS-786.
P/fixing GI angle iron post 50x50x6mm for barbed wire fencing around switch yard duly fixed in position as per drawing No. PDW/TB‑ 126. post length 0.70 Mtr.
P/fixing 4 rows barbed wire fencing around switch yard G.I barbed wire 14 SWG,2-Ply, 4 points fixed on GI angle iron post (excluding cost of post)
P/fixing of switching yard fencing frames as per drawing No. PDW/TS-786 except earth strip etc. Rate vetted CE(T&G) WAPDA Lahore.
Supply and spreading of crush stone / water born gravel of 11/2 inch size.
Dismantling of D.P.C of cement concrete 40mm thick & cleaning the site etc:
1) Excavation in foundation of buildings,bridges and other structures including dag‑belling dressing refilling around structure with excavated earth watering and ramming lead upto 30 m and lift upto 1.5 m. a) In ordinary soil.
2) Cement concrete plain including placingcompacting finishing and curing complete(including screening and washing of stoneaggregate) with out shuttering.
.
b) In 1:5 cement mortar 95.943 cum
c) In 1:3 cement mortar 24.742 cum
85 Sqm
75.2 cum
597.332 Sqm
a) 1:6 C.M. 110.244 cum
b) 1:4 C.M. 16.5 cum
140.703 cum
7590 Kg
290 Sqm
360.9 Sqm
290 Sqm
110.57 Cum
1350 /Sqm
14) P/F steel doors w/o grill on outer face. 6.525 Sqm
4) Damp proof course with (cement sand and shingle concrete 1:2:4) including 2 coats of asphaltic mixture.38 mm thick.
Sub base course of pit run grand granular material (including placing, mixing and comparting required cambring and grade)
5) Vertical damp proof course of 19 mm hick cement plaster 1:2 with bitumen at 1 kg per sq m.
6) Pacca brick work in ground floor (including striking of joints).
7) Reinforced cement concrete work using coarse sand including all labour and material except cost of steel reinforcement and its labour for bending and binding, which will be paid separately. This rate also includes all kinds of forms moulds; lifting shuttering, curing rendering and finishing the exposed surface (including screening and washing of shingle).
a) R.C work in roof slabs, beams, columns rafts, lintels and other structural member laid in situ or pre-cast laid in position complete in all respects.
a) Ratio 1:2:4. (Precast) c) Errection in poison RCC (Precast)
8) Supplying and fabrication of Intermediate grade deformed reinforcement of 40000 psi (276Mpa) yield for R.C.C.in beams columns and pile caps, including cutting, bending laying in position including cost of binding wire and removal of rust etc.
9) Single layer of burnt clay tiles 229x1 14x38 mm laid over 100mm earth & 25mm mud plaster without bhoosa grouted with cement sand 1:3 on top of R.C.C roof slab provided with 1.66 kg bitumen coating sand blinded.
10) Polythine sheet 0.2 mm thick laid over Two coatsof bitumenusing1.66kg.bitumen hot per sq.m over floors & DPCetc. Two coats of bitumen laid hot using1.66 kg. per Sq.m over roof & blinded withsand at 0.003 cum per Sq. m.
11) Providing and laying thermo pore sheet 38 mm thick.
12) Filling watering and ramming earth underfloor with surplus earth from foundationslead up to 31 meters and lift up to 1.50meters.
13) Filling watering and ramming earth underfloors with new earth (excavation fromoutside lead upto 30m and lift upto 1.5m
1350 Cum
530 cum
170.8 Sqm
58.9 Sqm
32.913 Sqm
20) Glass strips for dividing and flooring into panels.
i) 40 mm wide glass strips. 560.75 R.M
ii) 75 mm wide glass strips. 80 R.M
iii) 25 mm wide glass strips - R.M
280.85 Sqm
89.472 Sqm
177.889 Sqm
210 Sqm
25) Khuras on roof (610x610x1 50mm) 4 Each
25.968 /R.M
a) 100 mm dia..
8.5 RM
4 Nos.
8 Nos.
29) Providing and fixing 16 mm dia bar Hook for fan.. 4 Nos.
50 Sqm
10.639 Sqm
15) Carriage of 2.83 CUM/5 metric tons of all material like stone aggregat spaw coal,lime, surkhi etc. B.G. Rail fastening, bridge,girders, pipes, sheets, rails, M.S Bars or 1000 No. Bricks 254x 127x76mm or 1000 No. tiles 305x 152x 51 mm or 4.25 CUM of timber or 3.73 metric tons of fuel wood by truck or any other means owned by the contractor. Carriage or earth leads 4 K.M.
16) Supply and filling sand under floors or plugging in wells.
17) Mosaic flooring consisting of mosaic topping of one part of cement to two parts of marble chips laid over 38 mm thick flooring of 1:2:4 cement concrete including rubbing and polishing complete. 13 mm thick mosaic topping (with grey cement).
18) Brick on edge flooring laid in 1:6 cement mortar over a bed of 20 mm thick 1:6 cement mortar.
19) Mosaic dado or skirting with one part of cement & 2 parts or marble chips laid over 13 mm thick cement plaster 1:3 complete with finishing and polishing. 10 mm thick (with grey cement).
21) Cement plasters (1:5) up to 6.00 meter height 13 mm thick
22) Cement plasters (1:4) up to 6.00 meter height 13 mm thick.
23) Cement plasters (1:3) up to 6.00 meter height 13 mm thick
24) Cement pointing struck joints on walls. a) Ratio 1:2.
26) Cast iron rain water down pipe fixed is place excluding head and shoes but includingclamps etc. a) 100 mm dia
P/Fixing steel ladder for over head tank made of angle iron 50x50x6mm complete in all respect.
27) Rain water down pipe cast iron heads fixed in place including cost of clamps hold fast and painting 100 mm dia C.I heads.
28) Shoes, bends or off sets for cast iron rain water down pipe including fixing and painting
30) Double layer of building paper laid over 2‑coats of hot bitumen PB-3 or PB-4 for floors etc using 1.66 kg bitumen/Sqm.
31) P/f aluminum natural anodized open able double leaf door hinged without glazing
30.55 Sqm
33) Providing and fixing Door lock natural anodized.. 4 Each
3 Each
1 Each
35.75 Sqm
21.5 Sqm
5 Sqm
5.6 Rmt
40) White washing three coats. 1093.826 Sqm
13.125 Sqm
78.9 Sqm
18.818 Sqm
25.71 Sqm
45) Distempering Three coats I/c cost of priming coat 1735.11 Sqm
46) Eraction and removal of centering 136.119 Sqm
1:04:08 6 Each
56 Each
74.49 Sqm
50).Dismantling of brick work in cement mortor 32.35 /Cum
51).Dismantling of cement conceret 1:4:8 6.534 /Cum
3.58 /Cum
Total Of Item “G”
32) P/f aluminum natural anodized open able window hinged without glazing
34) P/f aluminum door closer (single action natural anodized.
35) P/f aluminum door closer (Double action natural anodized.
36) Glazing with plate glass 6 mm thick using PVC Gas Kit.
37) P/F platform of 40 x 4mm G I strap Flatand bottom or G I tee iron. 50x100x6mm1750mm long fixed in position complete in allrespects as perdrawing No. PDW/TB-626.
38) P/f MS Plate 14 Swg Size 600mm (Trenchcover) including welded with MS angle iron25 x 25 x 3mm fixed in position as perdrawing No. PDW/TB-625
39) P/F steel frame for door of MS angle iron51x51x5 mm MS flat 64x5 mm and MS strap51x25 mm.
41) Painting new surfaces, Preparing surface and painting of doors and window any type (including edges). Priming coat + two coats.
42) Topping of cement concrete1:2:4 including surface finishing and dividing into panels 40mm thick.
43) Vinyle floor tiles laid with adhesive 300x300x3m sie on firm foundation.
44).Supplying & laying coloured glazed China Ware tiles and angles in 1:2 cementsandmortor and i/c pointing with coloured cement to match the tiles
47) Bottom Khura of Brick masonry in cement sand mortar (1:6) 1.20 x 0.61 x 0.115 Mtr. Over 76mm cement concrete
48) P/f MS Channel 40 x 75 mm 300mm Long including grounding bolt size 12mm Dia 230mmlong as per drawing No. PDW/TR-525 (vetted rate)
49) Preparing surface and applying of acid resistance paint (vetted rate)
52).Dismantling of cement concrete reinforced in separating reinforcement from concrete cleaning &straighting the site
H
a) 150 mm 20 per meter
b) 225 mm 25.245 per meter
a) 13 mm i/d. 16 per meter
b) 20 mm i/d. 22.241 per meter
c) 50 mm i/d. 20.3 per meter
a. 20mm i/d. 1 Each
2 Each
3 Each
3.77 per meter
13.2
07) C.I soil specials with cement joints (1:2).
3 Each
2
08) C.I manhole covers with frames:
a. 300mm i/d light. 1 Each
b. 450mm i/d light. 2 Each
09) S. Trap 102mm i/d China ware (Pakistan made). 1 Each
1 Each
1 Each
12) C.P bib tap 13mm dia 2 Each
13) C.P stop cocks 13mm dia 3 Each
14) 13mm x 100mm C.P shower rose 1 Each
1 Each
16) PVC flushing pipe 32mm dia.1 Each
WATER SUPPLY, SANITARY ANDSEWERAGE/DRAINAGE WORKS.
01) P/Lowering & laying into trenches and jointing cement concret reinforced pipeline to correct alignment &grade including cutting of pipes where necessary cost of jointing material & testing.
02) Providing, laying, jointing & testing heavy water or steam quality G.I or W.I pipes and specials inside buildings & trenches.
03) P/F hard brass or gun metal peet value heavy pattern with hand wheel on G.I or W.I pipe lines laid in the ground or inside buildings.20mm dia
04)100mm i/d gully trap of cement concrete (including 305mmx 305mm masonry chamber and C.I grating 150 mm x 150 mm).
05) Floor Trap 100mm x 50mm (including 50mm concrete chamber all round).With C.I grating.
06) Providing and fixing C.I soil pipes with cement joints (1:2).
a. 50mm i/d.
b. 100mm i/d
a. 100mm i/d.
b. 50mm dia
10) White glazed earthenware water closet squatting Orissa pattern type domestic of best quality.
11) 13.5 liters capacity low level flushing cistern best quality.
15) Chromium plated towel rail / ring. Rail 61 0mmx20mm.
17) PVC flushing bend 32mm dia.. 1 Each
18) C.P waste coupling 40mm dia. 1 Each
19) Waste pipe for sinks & urinals 40mm dia PVC 2 Each
20) Connections 13mm dia (PVC) 2 Each
21) Providing and fixing 32 mm dia rubber chain plug. 1 Each
1 Each
1 Each
1 Each
1 Each
25). P/Fixing C.P Pillar Cock1 Each
26).P/Fixing soap dish Chromium plated
1 Each
1 Each
Total Of Item “H”
I C.H.B ELECTRICAL WORKS
40 /Point
3 /Point
110 per meter
95 per meter
22) Providing and fixing looking glass 560 x 405 mm size first quality without frame(PAK made)
23) Construction of sluice valve or fire hydrant chamber 61 0x61 0mm minimum size 230mm thick brick work 1:5 cement sand mortar, 114mm thick 1:6:12 cement concrete in foundation 50mm thick 1:2:4 cement concrete in bed, 75mm 1:2:4 RCC slab on top and 13mm thick 1:3 cement sand plaster inside.
24) Glass shelves 610 x 125 mm size with CP bracket with CP railing
25) White glazed earthen ware wash hand basin domestic of supreme quality 65 cm.
27) White glazed earthen ware edestal for wash hand basin domestic of supreme quality.
01) Wiring light or fan points with 1/1.13(3.029) steel insulated wire in 20mm (3/4”) steel conduit 62 mm gauge recessed in wall or column complete with witch, ceiling rose/button holder etc.
02) Wiring 3/5-pin 5 Amp. Wall socket point with 1.13(3/0.029) PVC insulated wire with 2.5 mm PVC insulated earthing conductor in MS conduit 19.1 mm dia recessed in the wall or column complete with the switch socket combined.
03) Wiring mains with 2-1/7/1.35 (7.044) PVC insulated wire in 19.1 mm 16 SWG (1.62 mm) steel conduits recessed in wall as required including all accessories.
04) Wiring mains with 4-1/7/1.04 (7/.044) PVC insulated wire 660 volts grade in 25.4 mm 16 SWG steel conduit recessed in the wall as required including all accessories.
8 per meter
280 per meter
2 Each
1 Each
4 Each
2 Each
2 Each
2 Each
6 Each
4 Each
3 Each
2 Each
20 Each
Total Of Item “I”
J STREET & SWITCH YARD LIGHTING
48.134 Cum
5.75 Cum
05) Wiring mains with 2-1/1.78 (7.029) PVC insulated wire in 19.1 mm 16 SWG (1.62 m) steel conduits recessed in wall as required including all accessories.
06) Providing/laying and connecting hard drawn bare copper wire 3.2 mm2 (14 SWG) as earth continuity conductor with any given main or sub-main in all system of wiring.
07) Providing & fixing flush type 3-pn 15‑Amp S/Phase plug socket switch (combined) as replacement on board already exist
08) Providing & fixing of distribution board 100 Amp 400-v 10 way per phase with 01-No I/C circuit Breaker 100 Amps.T.P. and outgoing circuit breaker 6-30 Amps complete with volt meter selector switch phase indication light and neutral link etc. recessed in wall
09) Supply and erection of ceiling fan best quality Pak made including wiring of down rod with 1/1.13 mm (3/.029) PVC wire fixing of regulator blade canopy etc. Size 56”
10) Providing and supplying of ACSP exhaust fan 457mm (18” sweep complete with regulator)
11) Erection of Exhaust fans of all sized in the opening already exist
12) Providing and erection butterfly shutter for 457mm (18”)sweep exhaust fan complete as required
13) Providing and fixing B.C Bakelite’s button lamp holder with 200mm white glass globe and gallery etc.
14) Providing and fixing milled steel bar fan clamp 13 mm dia suitable for RCC Roof
15) Providing and fixing emergency fitting (D.C) light 1x100 watt (incandescent C.H.B)
16) Providing & fixing 3-phase 4-pin water proof socket imported 415-volts 30 Amp including base complete in all respect as per drawing.
17) Providing and fixing fluorescent tube light approved Philips button light 1 x 40 watts complete with choke starter pre‑ wired internal connection complete.
01) Excavation in foundation of buildings, bridges and other structures including dag‑belling dressing refilling around structure with excavated earth watering and ramming lead up to 30 m and lift up to 1.5 m. a) In ordinary soil.
02) Cement concrete plain i/c placing, compaction finishing and curing complete (including screening and washing stone aggregate without shuttering Ratio 1:2:4)
40.8 Sqm
345 per meter
158 per meter
128 per meter
50 per meter
210 per meter
3 Each
6 Each
1 Each
6 Each
5 Each
24 Each
20 Cum
1 Each
70 Mtr.
1580 /Mtr
2 Each
03) Erection and removal or centering for R.C.C. of plain cement concrete (Vertical)
04) Wiring with 2-1/1.178 (7/.029) PVC Insulated wire in20mm (3/4”) PVC condition recessed in the wall as required
05) Wiring with 2-1/7/.085(7/.036) PVC insulated wire in 25mm (1”) conduit recessed in the wall as Required
05) Wiring with 4-17/.085 (7.03 6) PVC insulation wire 660 volts grade in 25mm(1) G.I pipe on surface.
06) Wiring with 4-17/1.35(7.052) PVC insulated wire 660 Volts grade in 25mm (1) G. Pipe on surface
07) Wiring with 4-17/1.35(7.052) PVC insulated wire 660 volts grade in 30mm (1‑ 1/4”) PVC conduit on surface
08) P/F power socket out let 30 AMP 500 Volts grade 4 pin water proof CEC make complete in all respect rate vetted by CENTDC Lahore No. 19816 dated, 13-04-2004.
09) Switch A.C one way S.P 15 Amps with side operating fixed Handle
10) Provide fixing of distribution board three phase 400Vots .3 Way per phase with one IC circuit breaker 30Amp. T.P. And out going breaker 6-30 Amp. Complete with N link in Wall recessed.
11) Providing Fixing T.P & NLIC switch 600 volts grade rewire able Type (60 amps)
12) Providing and installation of weather proof light beam flood lighting type N.VM with 100 watt incandescent lamp Holder + Lamp base – plate + Pitch block + glass cover Rate vetted by C.E (GSC) Lahore No. 689-90 dated 23- 07‑1998.
13) P/Installation of switch yard light Philips make type HAV 511/250 watts with chow, capacitor Mercury Vapour fluorescent lamp i/c cover and all accessories with out pipe fitting vetted rate C.E. (GSC) North Lahore No. 689‑ 90 dated 23-07-1998.
14) Filling watering and ramming earth under floors with new earth (Excavation from out side) lead up to 31 m and lift up to 1 .5m
15) TP & NLIC switch fuse 500 volts graderewire able type (30 amps)
16) PVC (Shavyl) Pipe “D” class 4” (100ml) P‑22-6/103mm
17). P/L &connecting hard drawn copper wire 2.06mm as earth continuity conductor wih any given main or sub main in all msystem of wiring
18).P/F 220KV DC 250-W indicent lamp phliphs make NV-15 (flood light)
19) P/F 250-W mercury flourcent lamp philiphs made 3 Each
Total Of Item “J”
K
1) 132 KV Equipment
1 Jobs
3 Jobs
3 Jobs
4 Jobs
2 Jobs
6 Jobs
3 Jobs
3 Jobs
i) 11 KV Lightening Arrestors 3 Jobs
6 Jobs
132 KV Steel Gantries
I. Beam 12m 4 Jobs
II. Column 10+3.1m 6 Jobs
III. Earth Mast 13.1m 1 Each
IV. Earthing Platform 8 Jobs
ERECTION WORK (Including Testing and Commissioning)
a) Assembly, erection, oil dehydration and neutral grounding arrangement complete of 132/11.5 KV, 20/26 MVA 50 Hz, 1 0%Impedance, Vector DYN1 1, On Load Tap Changer, three phase transformers with all accessories and associated work including the supply of requisite materials, complete as per details given in the specifications and drawings.
b) 145 KV Metal Oxide (Gapless) Lightening Arrestors with Steel Supporting structure and connectors.
c) 132KV, 40KA, 2000Amp, 110 Volt 3 Pole SF-6 Circuit Breaker with Steel Supporting Structure and connectors.
d) 132KV, 40KA, 2000Amp, 3 Pole single throw Bus Disconnectors with Steel Supporting Structure and connectors.
e) 132KV, 40KA, 2000Amp, 3 Pole single throw Line Disconnectors with extended creepage connectors for 600mmSq. Horizontal Aluminum Conductor with Steel Supporting Structure and connectors.
f) 132KV, 40KA, Single Phase Current Transformer ratio 1200:600:300/5 A (4 Core) Line CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel Supporting Structure and connectors
g) 132KV, 40KA, Single Phase Current Transformer ratio 200:100/5 A (3 Core) Transformer CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel Supporting Structure and connectors
h) 132KV, Voltage Transformer PT’s Ratio132 KV/√3/ 110/√3 Volt single Pole with Steel Supporting Structure and connectors.
J) 132 KV tension string assemblies complete with hardware disc type strength 100 KN having 8 insulators per string complete with hardware as specified.
132 KV Substation Connectors
I. TMLH 6 Nos.
II. TMHH 12 . Nos.
III. 90B63F 3 Nos.
IV. TM63A 6 Nos.
2)132 KV Control & Protection System
Control Panels:
1 Job
1 Job
1 Job
i): Line Rely Panel RP-3 2 Jobs
ii)Transformer relay panel RP-4 1 Jobs
3) 132 KV Substation General Equipment
500 Mtrs
3 Each
260 Mtrs
12 Each
3 Each
1 Jobs
8 Jobs
Cables & accessories
15 KV XLPE Power Cables along with terminations
i) 1 core 1000 MCM 800 Mtrs
ii) 3 core 4/0 AWG 120 sq. mm 330Mtrs Mtrs
Control Cables:
1550 Mtrs
1300 Mtrs
950 Mtrs
1450 Mtrs
CableTrays, Racks, Supports, cables conduits etc. 1 Lot
Earthing Material
i): 95mm² Copper conductor 2000 Mtrs
ii): Earthing rod (16mm dia, 3m long) 45 Each
iii): Cartridges
Type A 150 Each
Type B 60 Each
Type C 45 Each
iv): Moulds with holding clamps.
I. Line Control Panel with PT, CP-20
II. Transformer Control Panel CP-30
III. Transformer Control Panel CP-50
Relay Panels:
(Bidders to indicate quantities for satisfactory completion of work)
i) All Aluminum conductor 600mm² (Hawthorn)
ii) 11 KV Al pipes 63mm dia 4m long.
iii) Earth wire 7/3.0 (9mm dia)
iv) Earth wire tension assemblies with G-clamps
v) 11 KV post insulator with clamp.
vi) 11 KV structure
vii) Earthing platform
i) Control Cable 4x2.5mm²
ii) Control Cable 8x2.5mm²
iii) Control Cable 16x2.5mm²
iv) Control Cable 4x6mm²
Substation Grounding System for 132 kV switchyard and control house building.
Type A 3 Each
Type B 2 Each
Type C 2 Each
v): Grounding Connectors
Type I Nil
Type II Nil
Type III Nil
Control house building lightning protection system. 1 Lot
1 Lot
1 Lot
11 KV Panels
i): 11 KV incoming panel 25 KA, 2500A 1 Jobs
ii): 11 KV outgoing panel 25 KA, 630A 6 Jobs
1 set
1 Jobs
1 Jobs
1 Jobs
1 Lot
Fire fighting systems
a) Mobile fire extinguisher for switchyard area 5 Jobs
b) Fire extinguisher for control building (wall mounted) 12 Jobs
2 Jobs
Total of Item “K”
L
L-1 Tower Foundation at 20/15 degree
1
Switch yard lighting system 415/240V AC and emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified
Control building electrification system 415/240V AC & emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified.
Battery And Battery Charger:
i) Battery 110V DC, 150 AH
ii) Battery Charger 110V DC
iii) AC/DC Station Auxiliary Panel
iv) 11/0.415 KV pad mounted transformer, 200KVA with LT Cable 19/.083
v) 110 V DC auxiliary services system as specified.
c) Control Room Air-conditioner 18000 BTU Window Type
Total of Column No. 6 & 7 to be carried forward to Schedule No.4 for Grand Summary.
COST OF CIVIL / ELECTRIC WORKS 132 KV SDT TandoGhulamAli – Digri T/Line (Feed For Digri G/S New)Length 26.10 Km)
Construction of the tower foundation of the following type of tower in water logged/normal soil area using S.R cement crush stone size ½” to ¾” hill sand concreting complete i/c excavation in varied type of soil, open dewatering if required, stub setting, providing steel former as per approved design concrete mix ratio with mixture machine, concrete mix ratio 1:2:4 curing back filling compacting and also cylinder cube test up to the strength 21N/mm² (3000 PSI) at 28 days curing.
312 footing
12 footing
24 footing
4 footing
4 footing
4 footing
2 Installation of grounding Set 93 sets.
L-2 Tower Type Pile Foundation
ZM1, ZM 1+3, ZM 1+6= 1 No.
ZM30, ZM30+3 = 1 No.
ZM60, ZM60+3, = 1 No.
Dwg: PDW/TC/902.
i. 168 meters
ii. RCC Concrete
18.3 Cum
iii. Steel
13873 Kg
iv. Cost of Difference of S.R Cement
530 Bags
S.R Cement 1 Bag @ 446.00
O.P Cement 1 Bag @ 468.00
Difference 22.00
I.
Tower Type ZM1, ZM1+3 at 20 degree angle of repose as per drawing No. PDW/TC-198
II.
Tower Type ZM30, ZM30+3 at 20 degree angle of repose as per drawing No. PDW/TC-199
III.
Tower type ZM60, ZM-60+3 at 20 degree angle repose as per drawing No. PDW/TC-200
IV.
Tower Type ZM1, ZM1+3, ZM1+6 at 15 degree angle of repose as per drawing No. PDW/TC-440
V.
Tower Type ZM30, ZM30+3 at 15 degree angle of repose as per drawing No. PDW/TC-441
VI.
Tower type ZM60, ZM-60+3 at 15 degree angle repose as per drawing No. PDW/TC-442
Pile Work, 600 mm dia. Providing & Casting in Situ Bored RCC Pile in 1:1-1/2:3 (Cement concrete of approved crushed stone & coarse sand placed in nominal dia I/C all costs boring drilling with rotary, reserved rotary or any approved method, placing concrete with tremie& excluding cost of supply an fabrication of steel bars reinforcement cage, which shall be paid separately including washing of shingle. (WCSR-2013, page: 5-2, item No.4 (ii).
Reinforced cement concrete work using coarse sand except the cost of concrete of steel reinforcement and its labour for bending and binding. This rates also includes all kinds of forms moulds, lifting shuttering, curring, rendering and finishing the exposed surfaced (including screening and washing of shingle) f) In-situ in roof slabs, column, beam, rafts lintels and other structural member complete in all respect WCSR-2013, page 5-1,2, item No.3-a,(ii)
Supply & Fabrication of intermediate grade deformed reinforcement for RCC Piles i/C Cutting banding, laying in position welding and fastening i/c cost of binding wire and removal of rust etc (a) 40,000 PSI (276 MPA) Yield. WCSR-2013, page: 5-3, item-7 (a)
530 Bags
Total Cost of P = L1 + L2 M Tower Erection
Tower Type ZM1 78 Nos
Tower Type ZM1+3 2 Nos
Tower Type ZM30 4 Nos
Tower Type ZM30+3 1 Nos
Tower Type ZM60 7 Nos
Tower Type ZM60+3 1 Nos
Total of Item MN Electric Welding
Tower Type ZM1 /160 /tower 12450 Nos.
Tower Type ZM1+3 /260 /tower 520 Nos.
Tower Type ZM30 /310 /tower 1240 Nos.
Tower Type ZM30+3 /450 /tower 450 Nos.
Tower Type ZM60 /392 /tower 2744 Nos.
Tower Type ZM60+3 /545 /tower 545 Nos.
Total of Item NO Stringing Work
26.10 KM
Total of Item O
Total Cost of L+M+N+O
Abstract of cost of Part L-3
Jungle Clearance
N/A
(WS-2008, P/20-2, 1/14 (a)
P
(A) Air Quality Monitoring/ Analysis 6 06 Nos
(B) Water Quality Monitoring/ Analysis 12 12 Nos.
(C) Water Consumption Monitoring/ Analysis Daily Basis
(D) Noise Monitoring/ Analysis/ Measurement Daily Basis
(E) Solid Waste & Waste water Management 01 Location
(F) Lumpsum
Total of Item “P”
(WCSR-2013 Page: 22-4, Item No.16, & page: 22-16 Item no. 649)
Transportation of material from site store to location and erection of D/C type tower installation of ACD, Sign plate barbed wire and complete in all respect for following type of towers:
Electric welding nuts & bolts on erected towers up to 6-meters and applying paint on welded nuts & bolts:
The stringing/sagging according to Wapda standard 03-No. conductor type ACSR Lynx conductor and 01-No. shield wire i/c installation of assemblies, hardware, SB damper for lynx & earth wire, insulator, joints, dead end bodies and jumpering (where required) testing and commissioning complete
1. Jungle clearance and removing with 30 mater (site clearance for demarcation)
Environmental and Social Mitigation & monitoring costs
Other Environmental & Social Mitigation Measures (as per attached EMP)
Total of Column No. 6 & 7 to be carried forward to Schedule No.4 for Grand Summary.
Schedule No. 4 - Installation and Other Services
4-B: Conversion from 66KV to 132KV (AIS) Grid Stations at Digri along with allied Transmission Line.
Unit Price** Total Price**
Local Foreign Local Foreign
Currency Portion
4 5 6=3x4 7=3x5
Currency Portion
Currency Portion
Currency Portion
Schedule No. 4 - Installation and Other Services
Item
Description
Qty
1 2 3 4 5 6=3x4
Earthwork
E 1 Job
Total Of Item “E”
F
F-1 1510 Cum
F-2
a) Ratio 1:4:8 120.92 cum
b) b) Ratio 1:2:4 90.5 cum
F-3
a) In 1:4 cement mortar 11.038 cum
b) In 1:5 cement mortar 86.029 cum
c) In 1:3 cement mortar 0.526 cum
F-4
a) 38 mm thick. 74 Sqm
F-4A 19.49 Cum
F4-B 350 Cum
4-C: Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Jan Muhammad along with allied Transmission Line.
Unit Price**
Total Price**
Local Currency Portion
Foreign Currency Portion
Local Currency Portion
Compaction of earthwork with power roller including ploughting mixing moistening earth to optimum moisture contents in layers etc complete. a) 90% Maximum modified AASHTO dry density as per drawings and specifications.
132 KV Switch Yard Equipment Foundation
Excavation in foundation of buildings, belling dressing refilling around structure with excavated earth watering and ramming lead upto 30 m and lift upto 1.5 m. a) In ordinary soil.
Cement concrete plain including placing compacting finishing and curing complete (including screening and washing of stone aggregate) with out shuttering.(using S.R cement)
Pacca brick work in other than building i/c striking of joints. .(using S.R cement)
Damp proof course with (cement sand and shingle concrete 1:2:4) including 2 coats ofasphaltic mixture. .(using S.R cement)
Sub-base course of pit run gravel granuler placing, compacting to required chamber & gravel./
Supplying filling sand under floor & plugging in wells
F-5
a) Ratio 1:2:4 291.913 Cum
F-6 16285.86 Kg
F-7 240.431 Cum
F-8 2702.35 Cum
F-9 2702.35 Cum
F-11 865.469 Sqm
F-12 199.25 Sqm
F-13 Erection and removal of centering 136.119 Sqm
F-14
a) 225 mm. 65.844 per meter
Reinforced cement concrete work using coarse sand including all labour and material except cost of steel reinforcement and its labour for bending and binding, which will be paid separately. This rate also includes all kinds of forms moulds lifting shuttering, curing rendering and finishing the exposed surface (including screening and washing of shingle).
a) R.C work in roof slabs, beams,columns rafts, lintels and other structural member laid in situ or pre‑cast laid in position complete in all respects.
Supplying and fabrication of Intermediate grade deformed reinforcement of 40000 psi (276 Mpa) yield for R.C.C. in beams columns and pile caps, including utting,bending laying in position including cost of binding wire and removal of rust etc.
Filling watering and ramming earth under floor with surplus earth from foundations lead up to 31 meters and lift up to 1.50meters.
Filling watering and ramming earth under floors with new earth (excavation from outside lead upto 30m and lift upto 1 .5m).
Carriage of 2.83 CUM/5 metric tons of all material like stone aggregate spawl, coal, lime, surkhietc.B.G.Rail fastening, bridge, girders, pipes, sheets, rails, M.S Bars or 1000 No. Bricks 254x 27x76mm or 1000 No. tiles 305x 152x 51 mm or 4.25 CUM of timber or 3.73 metric tons of fuel wood by truck or any other means owned by the contractor. Carriage or earth leads 4 K.M.
Cement plasters (1:5) up to 6.00 meter height 13 mm thick
Painting new surfaces, Preparing surface and painting of guard bars. Priming coat + two coats.
P/Lowering & laying into trenches and jointing cement concrete reinforced pipeline to correct alignment & grade including cutting of pipes where necessary cost of jointing material & testing.
F-15 96 Each
F-16 219 Each
F-17 MS rail 132.6 Kg per meter (90-lbs per ft.) 12.19 per meter
F-17-A 11.02 Each
F-18 180 Each
F-19 98.68 Sqm
F-20 94.5 per meter
F-21 618.479 Sqm
F-22 98 Each
F-23 75 Each
F-24 58 Each
F-25 78 No.
F-26 185 per meter
F-27 210.25 Sqm
F-28 Making groves 25x13mm 634 Each
F-29 Supply and spreading of crush stone / water 435 Cum
F-30 White washing 3-coats 641.28 Sqm
F-31 Dressing of banks or ground surface 641.28 Sqm
F-32 Dismantling of brick work in cement mortor 25.15 Cum
F-33 Dismantling ofcement concrete plain
P/F MS dawel bars 16 mm dia and 1200mm long complete as per drawing.
Making holes 457 mm deep in cement concrete or stone masonry and repairing 76 mm dia.
P/F switch yard gate 1.5 inch GI and GI wire 8 mesh 2” x 2” complete with rail fixing in position as per drawing (vetted rate)
Fixing in position of foundation bolts duly assembled in template which will be provided by the contactor
S/erection in position Precast/pre-stressed RCC trench covers from Izhar concrete Pvt Ltd. Sheikhupura road Lahore to site rate vetted by Manager Civil NTDC Lahore No. 285 dated 04-04-2006.
Filling expansion joint 13 mm thick for 102 to 152 mm deep slab with bitumen mixed with sand and saw dust
Coal tar painting laid hot first and second Coat
P/F cable tray 2 way of GI angle iron I/C anchor bolts fixing in cable trench x ½.
P/F cable tray 3 way of GI angle iron I/C anchor bolts fixing in cable trench
P/Fixing GI earth strip 1.25” x 0.125” for switch yard fencing frame with allied bolts, nuts as per drawing No. PDW/TS-786.
P/fixing GI angle iron post 50x50x6mm for barbed wire fencing around switch yard duly fixed in position as per drawing No. PDW/TB‑ 126. post length 0.70 Mtr.
P/fixing 4 rows barbed wire fencing around switch yard G.I barbed wire 14 SWG,2-Ply, 4 points fixed on GI angle iron post (excluding cost of post)
P/fixing of switching yard fencing frames as per drawing No. PDW/TS-786 except earth strip etc. Rate vetted CE(T&G) WAPDA Lahore.
born gravel of 11/2 inch size.
1:04:08 4.095 /Cum
1:02:04 0.566 /Cum
F-34 14.49 /Sqm
F-35 47.125 /Sqm
Total Of Item “F”
J STREET & SWITCH YARD LIGHTING
48.134 Cum
5.75 Cum
40.8 Sqm
345 per meter
158 per meter
50 per meter
3 Each
6 Each
1 Each
6 Each
5 Each
Dismantling of D.P.C of cement concrete 40mm thick & cleaning the site etc:
Dismantlling of wire netting tennis court & frame work
01) Excavation in foundation of buildings, bridges and other structures including dag‑belling dressing refilling around structure with excavated earth watering and ramming lead up to 30 m and lift up to 1.5 m. a) In ordinary soil.
02) Cement concrete plain i/c placing, compaction finishing and curing complete (including screening and washing stone aggregate without shuttering Ratio 1:2:4)
03) Erection and removal or centering for R.C.C. of plain cement concrete (Vertical)
04) Wiring with 2-1/1.178 (7/.029) PVC Insulated wire in20mm (3/4”) PVC condition recessed in the wall as required
05) Wiring with 2-1/7/.085(7/.036) PVC insulated wire in 25mm (1”) conduit recessed in the wall as Required
06) Wiring with 4-17/1.35(7.052) PVC insulated wire 660 Volts grade in 25mm (1) G. Pipe on surface
08) P/F power socket out let 30 AMP 500 Volts grade 4 pin water proof CEC make complete in all respect rate vetted by CENTDC Lahore No. 19816 dated, 13-04-2004.
09) Switch A.C one way S.P 15 Amps with side operating fixed Handle
10) Provide fixing of distribution board three phase 400Vots .3 Way per phase with one IC circuit breaker 30Amp. T.P. And out going breaker 6-30 Amp. Complete with N link in Wall recessed.
11) Providing Fixing T.P & NLIC switch 600 volts grade rewire able Type (60 amps)
12) Providing and installation of weather proof light beam flood lighting type N.VM with 100 watt incandescent lamp Holder + Lamp base – plate + Pitch block + glass cover Rate vetted by C.E (GSC) Lahore No. 689-90 dated 23- 07‑1998.
24 Each
23.5 Cum
1 Each
70 Mtr.
1580 /Mtr
2 Each
3 Each
Total Of Item “J”
K
1) 132 KV Equipment
1 Jobs
3 Jobs
3 Jobs
4
13) P/Installation of switch yard light Philips make type HAV 511/250 watts with chow, capacitor Mercury Vapour fluorescent lamp i/c cover and all accessories with out pipe fitting vetted rate C.E. (GSC) North Lahore No. 689‑ 90 dated 23-07-1998
14) Filling watering and ramming earth under floors with new earth (Excavation from out side) lead up to 31 m and lift up to 1 .5m
15) TP & NLIC switch fuse 500 volts graderewire able type (30 amps)
16) PVC (Shavyl) Pipe “D” class 4” (100ml) P‑22-6/103mm
17). P/L &connecting hard drawn copper wire 2.06mm as earth continuity conductor wih any given main or sub main in all msystem of wiring
18).P/F 220KV DC 250-W indicent lamp phliphs make NV-15 (flood light)
19) P/F 250-W mercury flourcent lamp philiphs made
ERECTION WORK (Including Testing and Commissioning)
a) Assembly, erection, oil dehydration and neutral grounding arrangement complete of 132/11.5 KV, 20/26 MVA 50 Hz, 1 0%Impedance, Vector DYN1 1, On Load Tap Changer, three phase transformers with all accessories and associated work including the supply of requisite materials, complete as per details given in the specifications and drawings.
b) 145 KV Metal Oxide (Gapless) Lightening Arrestors with Steel Supporting structure and connectors.
c) 132KV, 40KA, 2000Amp, 110 Volt 3 Pole SF-6 Circuit Breaker with Steel Supporting Structure and connectors.
d) 132KV, 40KA, 2000Amp, 3 Pole single throw Bus Disconnectors with Steel Supporting Structure and connectors.
2 Jobs
6 Jobs
3 Jobs
3 Jobs
i) 11 KV Lightening Arrestors 3 Jobs
6 Jobs
132 KV Steel Gantries
4 Jobs
6 Jobs
1 Each
8 Jobs
132 KV Substation Connectors
6 Nos.
12 Nos.
3 Nos.
9 Nos.
2)132 KV Control & Protection System
Control Panels:
1 Jobs
1 Jobs
1 Jobs
i): Line Rely Panel RP-3 2 Jobs
ii)Transformer relay panel RP-4 1 Jobs
3) 132 KV Substation General Equipment
500 Mtrs
ii) 11 KV Al pipes 63mm dia 4m long. 3 Each
e) 132KV, 40KA, 2000Amp, 3 Pole single throw Line Disconnectors with extended creepage connectors for 600mmSq. Horizontal Aluminum Conductor with Steel Supporting Structure and connectors.
f) 132KV, 40KA, Single Phase Current Transformer ratio 1200:600:300/5 A (4 Core) Line CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel Supporting Structure and connectors.
g) 132KV, 40KA, Single Phase Current Transformer ratio 200:100/5 A (3 Core) Transformer CT’s with 600mmSq. Horizontal Aluminum Conductor with Steel Supporting Structure and connectors
h) 132KV, Voltage Transformer PT’s Ratio132 KV/√3/ 110/√3 Volt single Pole with Steel Supporting Structure and connectors.
j) 132 KV tension string assemblies complete with hardware disc type strength 100 KN having 8 insulators per string complete with hardware as specified.
i) Beam 12m
ii) Column 10+3.1m
iii) Earth Mast 13.1m
iv) Earthing Platform
i) TMLH
ii) TMHH
iii) 90B63F
iv) TM63A
i) Line Control Panel with PT, CP-20
ii) Line Control Panel with PT, CP-30
iii) Transformer Control Panel CP-50
Relay Panels:
(Bidders to indicate quantities for satisfactory completion of work)
i): All Aluminum conductor 600mm² (Hawthorn)
iii) Earth wire 7/3.0 (9mm dia) 260 Mtrs Mtrs
12 Each
v) 11 KV post insulator with clamp. 3 Each
1 Jobs
8 Jobs
Cables & accessories
i) 1 core 1000 MCM 800 Mtrs
ii) 3 core 4/0 AWG 120 sq. mm 330 Mtrs
Control Cables:
1650 Mtrs
1500 Mtrs
1000 Mtrs
1550 Mtrs
1 Lot
Earthing Material
i): 95mm² Copper conductor 2000 Mtrs
ii): Earthing rod (16mm dia, 3m long) 45-Each Each
iii): Cartridges
Type A 150 Each
Type B 60 Each
Type C 45 Each
iv): Moulds with holding clamps.
Type A 3
Type B 2
Type C 2
v): Grounding Connectors
Type I Nil
Type II Nil
Type III Nil
1 Lot
1 Lot
11 KV Panels
1 Jobs
6 Jobs
iv): Earth wire tension assemblies with G-clamps
i) 11 KV structure
ii) Earthing platform
15 KV XLPE Power Cables along with terminations
i) Control Cable 4x2.5mm²
ii) Control Cable 8x2.5mm²
iii) Control Cable 16x2.5mm²
iv) Control Cable 4x6mm²
CableTrays, Racks, Supports, cables conduits etc.
Substation Grounding System for 132 kV switchyard and control house building.
Control house building lightning protection system. Switch yard lighting system 415/240V AC and emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified
Control building electrification system 415/240V AC & emergency lighting system 220V & 110V DC, power sockets including cabling etc as specified.
i) 11 KV incoming panel 25 KA, 2500A
ii) 11 KV outgoing panel 25 KA, 630A
1 Jobs
1 Set
1 Jobs
1 Jobs
1 Jobs
1 Lot
Fire fighting systems
5-Jobs
12-Jobs
Total of Item “K”
L
L-1 Tower Foundation at 20/15 degree
1
164 Footing
8 Footing
4 Footing
4 Footing
4 Footing
iii) Battery And Battery Charger:
iv) Battery 110V DC, 150 AH
v) Battery Charger 110V DC
vi) AC/DC Station Auxiliary Panel
vii) 11/0.415 KV pad mounted transformer, 200KVA with LT Cable 19/.083
viii) 110 V DC auxiliary services system asspecified.
a) Mobile fire extinguisher for switchyard area
b) Fire extinguisher for control building (wall mounted)
c) Control Room Air-conditioner 18000 BTU Window Type
2 Jobs
Total of Column No. 6 & 7 to be carried forward to Schedule No.4 for Grand Summary.
COST OF CIVIL / ELECTRIC WORKS 132 KV SDT Digri – Tando Jan Muhammad T/Line (Feed For Tando Jan Muhammad Grid Station New) Length 15.70 Km)
Construction of the tower foundation of the following type of tower in water logged/normal soil area using S.R cement crush stone size ½” to ¾” hill sand concreting complete i/c excavation in varied type of soil, open dewatering if required, stub setting, providing steel former as per approved design concrete mix ratio with mixture machine, concrete mix ratio 1:2:4 curing back filling compacting and also cylinder cube test up to the strength 21N/mm² (3000 PSI) at 28 days curing.
I.
Tower Type ZM1, ZM1+3 at 20 degree angle of repose as per drawing No. PDW/TC-198
VII.
Tower Type ZM30, ZM30+3 at 20 degree angle of repose as per drawing No. PDW/TC-199
VIII.
Tower type ZM60, ZM-60+3 at 20 degree angle repose as per drawing No. PDW/TC-200
IX
Tower Type ZM1, ZM1+3, ZM1+6 at 15 degree angle of repose as per drawing No. PDW/TC-440
X
Tower Type ZM30, ZM30+3 at 15 degree angle of repose as per drawing No. PDW/TC-441
4 Footing
XII Installation of grounding Set 50 SetsL-2 Tower Type Pile Foundation
ZM1, ZM 1+3, ZM 1+6= 1 No.
ZM30, ZM30+3, = 1 No.
ZM60, ZM60+3, = 1 No.
Dwg:No. PDW/TC/902
i. Pile Work, 600 mm dia.
168 Mtrs
ii. RCC Concrete
18.3 Cu.m
iii. Steel
13873 Kg
iv. Cost of Difference of S.R Cement
530 Bags
S.R Cement 1 Bag @ 446.00
O.P Cement 1 Bag @ 468.00
Difference 22.00
Total Cost of L = L1 + L2
M Tower Erection
XI
Tower type ZM60, ZM-60+3 at 15 degree angle repose as per drawing No. PDW/TC-442
Providing & Casting in Situ Bored RCC Pile in 1:1-1/2:3 (Cement concrete of approved crushed stone & coarse sand placed in nominal dia I/C all costs boring drilling with rotary, reserved rotary or any approved method, placing concrete with tremie& excluding cost of supply an fabrication of steel bars reinforcement cage, which shall be paid separately including washing of shingle. (WCSR-2013, page: 5-2, item No.4 (ii).
Reinforced cement concrete work using coarse sand except the cost of concrete of steel reinforcement and its labour for bending and binding. This rates also includes all kinds of forms moulds, lifting shuttering, curring, rendering and finishing the exposed surfaced (including screening and washing of shingle)f) In-situ in roof slabs, column, beam, rafts lintels and other structural member complete in all respect WCSR-2013, page 5-1,2, item No.3-a,(ii)
Supply & Fabrication of intermediate grade deformed reinforcement for RCC Piles i/C Cutting banding, laying in position welding and fastening i/c cost of binding wire and removal of rust etc (a) 40,000 PSI (276 MPA) Yield. WCSR-2013, page: 5-3, item-7 (a)
(WCSR-2013 Page: 22-4, Item No.16, & page: 22-16 Item no. 649)
Tower Type ZM1 43 Nos.
Tower Type ZM30 4 Nos.
Tower Type ZM60 3 Nos.
Total of Item M
N Electric Welding
Tower Type ZM1 /160 /tower 6880 Nos.
Tower Type ZM30 /370 /tower 1240 Nos.
Tower Type ZM60 /392 /tower 1176 Nos.
Total Nuts & Bolts 9296 Nos.
Total of Item N
O Stringing Work
15.7 KM
Total of Item O
Total Cost of L+M+N+O
N/A
P
(A) Air Quality Monitoring/ Analysis 6 Nos
(B) Water Quality Monitoring/ Analysis 12 Nos
(C)Water Consumption Monitoring/ Analysis
(D)Noise Monitoring/ Analysis/ Measurement
(E)Solid Waste & Waste water Management
(F) Lumpsum
Total of Item “P”
Transportation of material from site store to location and erection of D/C type tower installation of ACD, Sign plate barbed wire and complete in all respect for following type of towers:
Electric welding nuts & bolts on erected towers up to 6-meters and applying paint on welded nuts & bolts:
The stringing/sagging according to Wapda standard 03-No. conductor type ACSR Lynx conductor and 01-No. shield wire i/c installation of assemblies, hardware, SB damper for lynx & earth wire, insulator, joints, dead end bodies and jumpering (where required) testing and commissioning complete
Abstract of cost of Part L-3 Jungle Clearance
1.
Jungle clearance and removing with 30 mater (site clearance for demarcation) (WS-2008, P/20-2, 1/14 (a)
Environmental and Social Mitigation & monitoring costs
Daily Basis
Daily Basis
01 Location
Other Environmental & Social Mitigation Measures (as per attached EMP)
Total of column No. 6 & 7 to be carried forwardto Schedule No. 5 Grand Summery
Schedule No. 4 - Installation and Other Services
7=3x5
4-C: Conversion from 66KV to 132KV (AIS) Grid Stations at Tando Jan Muhammad along with
Foreign Currency Portion