bozza sonda monotubo eng - proftech
TRANSCRIPT
SAMPLINGSOLUTIONS
CALIBRATION& METROLOGY
MONOTUBE PROBE
Made entirely ofstainless steel
Isokinetic samplingof emission dustin large chimneys
Easily dismantled to facilitate transport
EMISSIONS
CARE FOR THEENVIRONMENTCARE FOR THEENVIRONMENT
MONOTUBE PROBE
Made entirely ofstainless steel
Isokinetic samplingof emission dustin large chimneys
Easily dismantled to facilitate transport
It is composed of a main probe body to which a series of extensions may be connected, allowing it to mount probes of up to a 6-metre maximum.
The probe body has both an integrated measuring tube and a sampling tube to which a filtration device and nozzle may be mounted.
Extensions have a diameter of 60 mm and are available in lengths of 1 m, 1.5 m and 2 m.
Silicon pneumatic tube connections run inside the extensions.
All components are made of stainless steel and have been designed in compliance with the requirements indicated in UNI 16911-1 andUNI EN 13284-1.
The assembled probe may be used in ducts with a minimum aperture of 80 cm diameter or larger.
Maximum operating temperature 200 °C.
Data
shee
t n. 0
3-01
5-R0
0 - M
onot
ube P
robe
MONOTUBE PROBE
Via Don Fracassi, 41/43 - 20010 Bareggio (MI) - ITALY - Tel. +39.02.90361622- [email protected] - www.megasystemsrl.comMEGA SYSTEM s.r.l. reserves the right to make technical, aesthetic and dimensional changes to the presented products without prior notice.