bracelet making instructions how to make bracelets with beads and string
TRANSCRIPT
Bracelet making instructions-how to make bracelets
with beads and string
By selecting the beads, charms and clasps of your
choice, you are surly ready to learn how to make
bracelets with beads and string. The string bracelets,
which are really amusing and easy to make may
really add something uncommon to your inspire. In
the project, I made use of two types of string for
making bracelets: Silver and Gold. Here we go!
Beads and string for making
bracelets:
1mm Leather cord
Acrylic Beads-CCB
Large hole bead
Scissors
How to make bracelets with beads and string?
Step1: prepare the cords and beads
1. Cut two strips of 60cm long leather cord, fold
them in half and tie an overhand knot at folded
locations with leaving a small loop as closure;
2. Have another strand of 200cm long leather cord
and lay it under the four short cord ends. Pull to
make two sides be symmetrical. These two ends
are main working ends;
3. Thread all beads of choice onto one of the four
short ends. Secure by a knot.
The instructions show the details on how to make bracelets with beads and string. I totally made two
pieces of them because I cannot decide the color of string for making bracelets. Interested? Just click to
read more.
Step2: braid your bracelet
The above are all details about how to make bracelets with beads and string. Additionally, as you
have seen on the beginning presented picture, by exchanging the string for making bracelets with
the gold ones, you will rapidly gain another distinctive bracelet. Have fun with your new pieces!
Shop the large hole beads in your bracelets making please click:
http://www.pandahall.com/beads/wholesale-Metal-European-Beads/0-213-1.html
1. Push one of beads up to the top and tie a
Square knot with two working ends;
2. Keep pushing the beads and tying Square
knots until reached to your desired length;
3. Gather all ends and tie a huge knot. Pull it
tightly, then thread the large hole bead and
secure with another knot.
4. Remove all excess cord ends.