brakes and braking system

38
Brakes & Braking system Dr. Chetan S. Mistry

Upload: csmistry

Post on 15-Jul-2015

898 views

Category:

Automotive


4 download

TRANSCRIPT

Page 1: Brakes and Braking system

Brakes&

Braking system

Dr. Chetan S. Mistry

Page 2: Brakes and Braking system

BRAKES

• Principle

• Braking distance

• Braking efficiency

• Weight transfer

• Wheel skidding

• Principle and working of various types of brakes

• Anti-lock Brake systems (ABS)

Page 3: Brakes and Braking system

Braking requirements:

It MUST

•Stop the vehicle within smallest possible distance.

• Act instantaneously in case of an emergency.

• Strong enough to sustain sudden braking force.

• Neither slip nor should cause any skid the vehicle.

•Brake lining should have longer life.

• Operate with the least effort.

Page 4: Brakes and Braking system
Page 5: Brakes and Braking system

Frictional Resistance and Coefficient of Friction

The value of Coefficient of friction depends on several factors:

•Road surface condition.

• Tyre tread pattern.

• Inflation pressure (Correct, over or under –inflated.)

• Material of road surface.

Page 6: Brakes and Braking system

Braking Efficiency

Let aBr = Braking retardation

g = Acceleration due to gravity

Highly efficient brakes produce greater deceleration (retardation)

which may cause

• Injury to passenger due to their sudden forward shifting.

• Goods collide among themselves, or collide with driver’s cabin.

• Rapid wear of tyre tread.

• Faster wear of the brake linings and the brake drum.

• Driver to lose control of the vehicle.

As per international standard braking function term is use which is

equal to

Page 7: Brakes and Braking system

Stopping distance

Page 8: Brakes and Braking system

Braking Effect : Weight transfer

Page 9: Brakes and Braking system

Example:A Maruti car moving at 80kmph takes 32 m to stop when the brakes are appliedon it under standard test conditions. How much is its braking efficiency? Alsodetermine the retardation produced during braking.

Ans: v=22.2 m/sBE =87.2 %deceleration =8.55 m/s2

Page 10: Brakes and Braking system

Climbing- up a inclined road

Page 11: Brakes and Braking system

Brakes applied to front wheels only

Page 12: Brakes and Braking system

Brakes applied to rear wheels only

Page 13: Brakes and Braking system

Brakes applied on all the four-wheels

Page 14: Brakes and Braking system

Daewoo car has kerb weight of 970 kg and wheelbase of 2520mm. Its CG is 1250 mm in front of the rear axle and 655 mm above the level road. The coefficient of road-wheels adhesion is 0.6. If the car is moving upward on a road inclined at an angle of 25 deg with horizontal, calculate the load distribution on the front and rear axles, the acceleration or retardation, and the stopping distance when, while moving at 60kmph (1) the front brakes are applied (ii) rear brakes are applied and (iii) all the four-brakes are applied. The seating capacity of the vehicle is for 5 passengers including driver. Take weight of each person as 600 N.Ans. 1. RF= 6.76 kN, RR = 5.23kN, Deceleration = 7.28 m/s2, distance = 19.086 m2. RF= 6.49 kN, RR = 5.01kN, Deceleration = 6.47 m/s2 , distance = 21.47 m3. RF= 7.50kN, RR = 4.0kN, Deceleration = 9.48 m/s2, distance = 14.656 m

Page 15: Brakes and Braking system

Types of brakes

I. On the basis of purpose served

1. Main (Service or primary) operational brakes

2. Parking (or secondary ) brakes

II. On the basis of location in the vehicle

1. Wheel mounted brakes

2. Transmission mounted brakes

III. On the basis of driver’s Ergonomics

1. Foot brakes

2. Hand brakes

IV. On the basis of Actuating method

1. Mechanical brakes

2. Hydraulic brakes

3. Pneumatic brakes (a) Compressed air brakes (b) vacuum brakes

4. Electric brakes

Page 16: Brakes and Braking system

V. On the basis of construction

1. Drum brakes

2. Disc brakes

3. Band brakes

VI. On the basis of application of braking effort

1. Manual brakes

2. Servo (power-assisted) brakes

3. Power (power-operated) brakes

VII. On the basis of action of brake shoes

1. Internal expanding brakes

2. External contracting brakes

VIII. On the basis of combinations

1. Drum and disc combination brakes

2. Mechanical and hydro combination brakes

IX. On the basis of speciality

1. Engine exhaust gas operated brake

2. Pneumatic-hydro brake

3. Hill-holding brake

Page 19: Brakes and Braking system

Articulate anchored type

Floating expander, fixed and

floating anchor type

Types of drum brakes

Page 20: Brakes and Braking system

Disc brakes

Page 21: Brakes and Braking system

Swinging caliper type Sliding caliper type

Types of Disc brakes

Page 22: Brakes and Braking system

Description

1 Life of friction material

2 Visibility of wear from outside

3 Heat dissipation

4 Replacement of friction materials

5 Weight

6 Cooling

7 Water and duct collection

8 Braking effect

Description

9 Temperature effect

10 Self energizing action

11 Brake pedal efforts

12 Behavior of hydraulic system in

released state

13 Force needed to apply brake

14 Nature of wear

15 Shape of friction lining

Page 23: Brakes and Braking system

Description Drum brake Disc brake

1 Life of friction material Reasonable

(about 1500 km)

Reasonable

(about 2500 km)

2 Visibility of wear from outside Not possible Can be seen at a

glance

3 Heat dissipation Inferior Better

4 Replacement of friction materials Troublesome and time

taking

Easy and rapid

5 Weight Bulky Lighter

6 Cooling Very slow Efficient

7 Water and duct collection Accumulates Self cleaning

8 Braking effect Generally inconsistent Consistent

Page 24: Brakes and Braking system

Description Drum brake Disc brake

9 Temperature effect Severe Unaffected

10 Self energizing action Exists absent

11 Brake pedal efforts Higher Proportional to

retardation

12 Behavior of hydraulic system in

released state

Some pressure

always exists

No hydraulic pressure

on piston

13 Force needed to apply brake Comparatively less More, since brakes are

not self energizing

14 Nature of wear Non uniform Uniform

15 Shape of friction lining Curved Straight

Page 25: Brakes and Braking system

Mechanical brakes

Page 26: Brakes and Braking system

Hydraulic brakes

Page 27: Brakes and Braking system

Types of Master Cylinder

1. Single cylinder

(a)For drum brakes (b) for disc brakes

2. Double master cylinder

3. Tandem master cylinder

Master cylinder

Page 29: Brakes and Braking system

Working

Page 30: Brakes and Braking system

Responses when fluid is leaking

Page 31: Brakes and Braking system

Conventional braking system Axle by axle split system

Upper and lower wheel cylinder system Diagonal split system

Page 32: Brakes and Braking system

Pneumatic brakes

Page 33: Brakes and Braking system

Braking limitations

Page 34: Brakes and Braking system

Stopping Distance

Sudden Braking

Page 35: Brakes and Braking system

Braking on Slippery surface

Page 36: Brakes and Braking system

Antilock Braking System

http://www.nhtsa.gov/cars/problems/equipment/absbrakes/page1-doom-04-26-2013.html

http://www.drivingfast.net/technology/abs.htm

Page 37: Brakes and Braking system
Page 38: Brakes and Braking system