brentwood...avid property group 30 apr, 2018 30215 st17 dps(a).dwg acn 604 671 374 queensland...
TRANSCRIPT
1447
1447 A
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
ROBERTS CRESCENT
PROPOSED
LOT 1448
PROPOSED
LOT 1391
1447
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
PROPOSED
LOT 1450
PROPOSED
LOT 1393
Retaining Wall Lot 1447
Min Height:- 1.8m
Max Height:- 1.9m
Average Height:-1.85m
1448
1448 A
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
ROBERTS CRESCENT
PROPOSED
LOT 1449
PROPOSED
LOT 1447
1448
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
PROPOSED
LOT 1450
Retaining Wall Lot 1448
Min Height:- 1.3m
Max Height:- 1.4m
Average Height:-1.35m
1449
1449 A
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
ROBERTS CRESCENT
PROPOSED
LOT 1448
1449
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
PROPOSED
LOT 1450
RO
AD
Retaining Wall Lot 1449
Min Height:- 0.8m
Max Height:- 1.3m
Average Height:-1.05m
Retaining Wall Lot 1449
Min Height:- 0.0m
Max Height:- 0.8m
Average Height:-0.4m
1450
1450 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
PROPOSED
LOT 1448
1450
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1447
PROPOSED
LOT 1449
PROPOSED
LOT 1393
PROPOSED
LOT 1394
PROPOSED
LOT 1451
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1450
Min Height:- 0.3m
Max Height:- 0.9m
Average Height:-0.6m
1451
1451 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
1451
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1450
PROPOSED
LOT 1393
PROPOSED
LOT 1394
PROPOSED
LOT 1452
PROPOSED
LOT 1395
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1451
Min Height:- 0.3m
Max Height:- 1.1m
Average Height:-0.7m
1452
1452 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
1452
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1451
PROPOSED
LOT 1396
PROPOSED
LOT 1394
PROPOSED
LOT 1453
PROPOSED
LOT 1395
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1452
Min Height:- 0.3m
Max Height:- 0.8m
Average Height:-0.55m
1453
1453 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
PROPOSED
LOT 1452
PROPOSED
LOT 1454
PROPOSED
LOT 1396
PROPOSED
LOT 1397
PROPOSED
LOT 1395
1453
RO
AD
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1453
Min Height:- 0.2m
Max Height:- 0.6m
Average Height:-0.4m
1455
1455 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
PROPOSED
LOT 1454
PROPOSED
LOT 1456
PROPOSED
LOT 1398
PROPOSED
LOT 1399
PROPOSED
LOT 1397
1455
RO
AD
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1455
Min Height:- 0.2m
Max Height:- 0.7m
Average Height:-0.45m
1456
1456 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
PROPOSED
LOT 1455
PROPOSED
LOT 1362
PROPOSED
LOT 1398
PROPOSED
LOT 1399
RO
AD
1456
PROPOSED
LOT 1400
PROPOSED
LOT 1363
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1456
Min Height:- 0.7m
Max Height:- 1.1m
Average Height:-0.9m
1457
1457 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1458
PROPOSED
LOT 1475
PROPOSED
LOT 1476
PROPOSED
LOT 1367
PROPOSED
LOT 1364
1457
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1457
Min Height:- 3.0m
Max Height:- 3.0m
Average Height:-3.0m
Retaining Wall Lot 1457
Min Height:- 0.2m
Max Height:- 1.0m
Average Height:-0.6m
1458
1458 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1459
PROPOSED
LOT 1475
PROPOSED
LOT 1476
1458
PROPOSED
LOT 1474
PROPOSED
LOT 1457
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1458
Min Height:- 3.0m
Max Height:- 3.0m
Average Height:-3.0m
Retaining Wall Lot 1458
Min Height:- 0.2m
Max Height:- 0.9m
Average Height:-0.55m
1459
1459 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1460
PROPOSED
LOT 1475
1459PROPOSED
LOT 1474
PROPOSED
LOT 1458
PROPOSED
LOT 1473
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1459
Min Height:- 3.0m
Max Height:- 3.0m
Average Height:-3.0m
Retaining Wall Lot 1459
Min Height:- 0.2m
Max Height:- 0.9m
Average Height:-0.55m
1460
1460 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1461
1460
PROPOSED
LOT 1474
PROPOSED
LOT 1459
PROPOSED
LOT 1473
PROPOSED
LOT 1472
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1460
Min Height:- 3.0m
Max Height:- 3.0m
Average Height:-3.0m
Retaining Wall Lot 1460
Min Height:- 0.2m
Max Height:- 0.9m
Average Height:-0.55m
1461
1461 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1462
1461
PROPOSED
LOT 1460
PROPOSED
LOT 1473
PROPOSED
LOT 1472
PROPOSED
LOT 1471
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1461
Min Height:- 3.0m
Max Height:- 3.0m
Average Height:-3.0m
Retaining Wall Lot 1461
Min Height:- 0.2m
Max Height:- 1.0m
Average Height:-0.6m
1462
1462 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1463
1462
PROPOSED
LOT 1461
PROPOSED
LOT 1472
PROPOSED
LOT 1471
PROPOSED
LOT 1470
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1462
Min Height:- 2.6m
Max Height:- 2.6m
Average Height:-2.6m
Retaining Wall Lot 1462
Min Height:- 0.2m
Max Height:- 1.0m
Average Height:-0.6m
1463
1463 A
ADDITIONAL NOTES:The LOT dimensions and area shown hereon are subject tofinal field survey and also to the requirements of Counciland any other authority which may have requirementsunder any relevant legislation.
Final surface contours shown hereon have been suppliedby Arcadis.
Location of retaining walls are as shown on Engineeringdesign drawings.Their as-constructed location may differfrom their design location. Retaining wall heights havebeen supplied by Arcadis.
Compaction of any fill material placed on this site shall becompleted to level one inspection and testing services inaccordance with AS3798-2007.
Depth of fill values are calculated from the lower of thepre-development surface or the pre-stage 12Aconstruction (existing surface).
Copyright © Queensland Surveying Pty Ltd a VerisCompany 25/01/2018.
015m
50 mm150 mm SCALE BAR
100 mm
30m 45m
Drawing No Issue
DISCLOSURE PLAN
of Proposed LOT
being part of
Scale: 1:300 @ A4
Computer File Ref:
Local Authority:
Locality:
Plot Date:
Checked:
Drawn:
Horizontal Meridian:
Vertical Level Datum:
Computer File Ref:
Designed:
IPSWICH C.C.
BELLBIRD PARK
MMR
SRPD
MGA, Zone 56
AHD D
ARCADIS
Issue Revisions DrawnDate
THESE DESIGNS AND DRAWINGS ARE COPYRIGHT
AND ARE NOT TO BE USED OR REPRODUCED
WITHOUT THE WRITTEN PERMISSION OF VERIS
Data Sources
Original SRPDA
IMPORTANT NOTES:
(These notes are an integral part ofthis plan)This plan has been prepared forAVID PROPERTY GROUP for thepurposes of A Disclosure Plan
Under the Land Sales Act 1984 (as
amended).
It is not to be used by any otherperson or corporation or for anyother purposes and is subject tothe following limitations:
Please refer to the approvedDevelopment Application forconditions relating to the LOT andto approved Operational Worksdrawings for services location andpossible easements.
BRENTWOOD
30215-DP
For
STAGE 17
Cadastral Boundaries
Final Surface Contours
30215 St14-17 LC01(D).dwg
Pre-development Surface
Hayes Survey & Spatial survey 3/6/2014
AVID PROPERTY GROUP
30 Apr, 2018
30215 St17 DPs(A).dwg
ACN 604 671 374
Queensland Surveying Pty Ltd, a Veris Company
BRISBANE
(07) 3666 4700
MACKAY
(07) 4951 2911
WHITSUNDAYS
(07) 4945 1722
CAIRNS
(07) 4051 6722
veris.com.au
TOWNSVILLE
(07) 4726 8111
27.04.2018
Retaining Walls
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
Pre-Stage 14 Surface
194100_114 (D).dwg
Lot 502 on SP300682
180424-xc14de-aa006714-bnx-DesignBase-REVC.dwg
RO
AD
PROPOSED
LOT 1465
1463
PROPOSED
LOT 1462
PROPOSED
LOT 1471
PROPOSED
LOT 1470
PROPOSED
LOT 1464
PROPOSED
LOT 1466
DEPTH RESTRICTION INFORMATION:The LOT shown on this plan is restricted to the depth of30.48m from the surface as defined by plan S31234 in theDepartment of Natural Resources, Mines & Energy.
Where applicable, areas to be filled are shown as:
shown as:
Final surface contours based on A.H.D. datum at an interval of 0.5m,
LEGEND
Depth of fill, in metres, shown as:-
Retaining wall and retaining wall height, shown on the lower side
of the wall, have been drawn from plans supplied by Arcadis
shown as:
Retaining Wall Lot 1463
Min Height:- 2.0m
Max Height:- 2.0m
Average Height:-2.0m
Retaining Wall Lot 1463
Min Height:- 0.2m
Max Height:- 1.0m
Average Height:-0.6m