Breville BKC600XL Water Valve ReplacementReplacing the water valve should it fail to work.

Written By: Antonio

Breville BKC600XL Water Valve Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4

INTRODUCTION

Replacing the water valve should it fail to work.

TOOLS:Phillips #0 Screwdriver (1)

Macbook Pro and Air 5-Point PentalobeScrewdriver (1)

PARTS:Breville BKC600XL Water Valve (1)

Tying Band (1)

Breville BKC600XL Water Valve Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 4

http://www.ifixit.com/Tools/Phillips-0-Screwdriver/IF145-005-3http://www.ifixit.com/Tools/MacBook-Air-5-Point-Screwdriver/IF145-090file:///Item/Breville_BKC600XL_Water_Valvefile:///Item/Tying_Band

Step 1 — "Bottom" Black Shell Piece

Remove the following 2 screws:

Two 12mm black Truss Phillips screws.

Reminder for reassembly; This bottom piece is first to be screwed back on.

Step 2 — "Top" Black Shell Piece

Remove the two 12mm Phillipsscrews.

Breville BKC600XL Water Valve Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 4

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2017-06-17 02:55:57 AM.

Step 3 — Silver Casing

Remove the grey plastic casing.

Remove the two 12mm hexagonal screws.

Step 4 — Water Valve

Cut the band connecting the hose tothe water valve.

Remove the water valve.

Reminder for reassembly; You willneed a new band to tie the hoseback to the water valve.

Breville BKC600XL Water Valve Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 4

Breville BKC600XL Water Valve ReplacementWritten By: AntonioINTRODUCTION

TOOLS:PARTS:Step 1 — "Bottom" Black Shell PieceStep 2 — "Top" Black Shell PieceStep 3 — Silver CasingStep 4 — Water Valve