BridgeQUICK SETUP GUIDE

4

What’s includedin this package:

[1] Bridge two-channel Digital Hearing Aid

[6] Silicone ear buds (various sizes)

[2] Invisitubes (L/R)

[1] Cleaning brush

[1] Carrying case

Invisitube

Microphones

Volume control

Earbud

Surefit stable line

Battery compartment

4

Get to knowyour hearing aidcomponents

See illustration for a description of your hearing aid and its various parts.

IMPORTANT: please save this box and all the contents. If you choose to return the hearing aid for any reason, it must be returned in the original packaging.

Bridge

4

Batteries

Your hearing aid uses a size 312 battery.

Be sure to peel the sticker off the battery and wait at least one minute before using. Zinc batteries use air as an energy source and need a minute or two to fully charge.

See instructions for inserting the battery on the next page.

Note: if your hearing aid beeps continuously, the battery needs to be changed.

4

4

4

Installing/replacing the battery

1. Gently open the battery door by pushing the battery compartment knob.

2. Insert the battery with the + sign facing UP (towards you.)

3. Close the battery compartment.

4. Your hearing aid is ready for use.

Push here

Place battery in compartment, then snap shut.

Note: to preserve battery life, remove the battery when hearing aid is not in use.

Use the magnet on the cleaning brush to help with handling the battery.

Opens outward

4Assemble your hearing aid

1. Choose the Invisitube for the corresponding ear (red=right, blue=left.)

2. Use the cleaning brush to insert the Invisitube into the TOP of the hearing aid, then screw in until hand tight.

3. Insert the earbud on to the end of the Invisitube.

Insert Invisitube into top of hearing aid.

Insert the earbud on to the end of the Invisitube.

Use notch on top of cleaning brush as a tool.

4

4

4Wearing the hearing aid

1. Place the hearing aid behind your ear, near the top.

2. Insert the earbud snugly into the ear canal.

3. Move the surefit stable line into the lower bowl of your ear. (Optional.)

Tuck the surefit stable line into the lower bowl of your ear. If the hearing aid fits comfortably without it, you may cut it off.

Be sure to choose an earbud size that feels comfortable, yet fits snugly.

4

44

8

Adjusting the volume

1. To raise volume, press and quickly release the TOP of the volume switch.

2. To lower volume, press and quickly release the BOTTOM of the volume switch.

Press top of volume button and quickly release to raise volume.

Press bottom of volume button and quickly release to lower volume.

Note: you will hear a SINGLE BEEP when the volume is adjusted. A DOUBLE BEEP means you’ve reached the volume limit.

You may press the volume up or down button several times to reach your desired volume.

4

4

8

Program your hearing aid

1. Press and hold the volume button for three seconds until you hear a beep, or several beeps.

2. See the chart for which program setting sounds best in your listening environment.

Program 1Single beep:

Program 2Two beeps:

Program 3Three beeps:

Program 4Four beeps:

Use in a quiet environment (like at home) for basic conversation with people.

Use in a noisy environment (like a restaurant) for basic conversation with people beside you.

Use in a moderately loud environment (like driving on the highway) for basic noise reduction.

Use in a noisy, loud place for maximum noise reduction.

Bridge is a digital hearing aid that can cycle through various programs for various listening environments.

Program Application

8Maintenance

To maximize sound quality and extend the life of your hearing aid, follow these simple steps:

1. Wipe your hearing aid daily with a tissue or cloth to keep free of dust and debris.

2. Clean the invisitube periodically. Remove the earbud, and insert the thin end of the cleaning brush into the tube to remove any soil or debris from the tube. Note: for optimum performance, replace the invisitube and earbud every three to six months.

3. Clean the microphones periodically. Use the thin end of the cleaning brush to remove any lint or debris from the microphone openings.

4. Avoid physical shock to the hearing aid, such as dropping on a hard surface, or dropping something heavy on the device.

5. Avoid exposure to extreme heat or moisture. Use the supplied carrying case to keep the hearing aid covered when not in use.

8Troubleshooting

1. Before testing the device, be sure there is a new working battery in the device.

2. See the chart for action steps and possible causes of any problems before contacting customer service.

Intermittent, distorted, weak or no sound

Feedback or whistling

Turn device onReplace batteryAdjust volumeClean or replace invisitube or earbudClean ear canalPossible causes: moisture in hearing aid, or battery corrosion

Adjust volumeClean or replace invisitube or earbudClean ear canalReposition earbud in earPossible causes: outer shell damage

Note: to test the device, remove the invisitube from the hearing aid, and raise the volume to maximum setting. It should whistle.

Problem Action steps/possible causes

8

Connecting theBluetooth App

1. Locate and install the free “Control HA” app from Apple App Store or Google Play Store.

2. Connect your device(s) using Bluetooth via your phone settings.

Download “Control HA” app on to your device.

Hint: when you go to either app store, just use the Search function to type in “Control HA” and look for the icon above.

actual app icon

Be sure to turn Bluetooth ON in your phone’s settings.

4

4

8

Connecting theBluetooth App

3. Open Control HA app and connect your hearing aid(s). You can choose to assign your hearing aid as LEFT, RIGHT, or BOTH. Be sure to click SAVE after you choose.

4. Control your hearing aid(s) with the controls on this interface.

Assign your hearing aid(s) using the main interface.

Adjust volume on your hearing aid(s) using the volume +/- buttons in the app.

Switch listening programs using the app. See Section 6 for various listening applications.

4

4

8

Connecting theBluetooth App

5. Adjust the sound of your hearing aid(s) with Tone Controls in the main menu.

6. Check battery life with the Battery control of the main menu.

Use Tone Controls to adjust bass and treble levels in your hearing aid(s).

Get a real-time readout of battery life in each hearing aid.

After you install the app, you can refer to the HELP section for more details.

8

8

This page intentionally left blank.

THANK YOU for purchasing an Invisitone hearing aid. Every FDA registered product we sell is audiologist tested to provide the maximum assistance for mild to moderate hearing loss.

If your hearing gets worse: we strongly suggest that you receive an evaluation from a licensed doctor who specializes in hearing loss and/or diseases of the ear (such as an otolaryngologist.)

If you have any questions: visit our website at invisitone.com

Contact us:support@invisitone.comor call 1-800-405-8934

© 2020 Invisitone, LLC. All rights reserved.