briquette of durian skin

3
Briquette of Durian Skin How to make briquettes with durian skin as base material is as follows: A. Equipment • The blades / cutters to chop / chop durian skin • Drum used for furnace • Sieve or strainer • Mixer • Wooden Grinder • Molding • Basin for Mixing • Zinc for drying 2. Material • Durian Skin • Leaves or straw • Wheat starch (sago) • Water 3. Step Work • Previously Durian skin is cut into pieces or chopped, chop up a bit smaller in size in order to burn more quickly later. • After it is chopped or minced and then dried in the sun on a bed of zinc heated to the drying process faster. • Then prepare the drum on a flat ground , enter the twigs or straw first, followed by the skin has been sun-dried then insert a pile of straw or twigs but not too thick, burn the haystack and durian skin, cover with lid and create small holes in order to burn evenly and when there is no smoke coming out of the hole to open the lid and stir to make sure it has a charcoal, the combustion process should not be too long. • Lift and separate the combustion products before, which has been filtered and separated into charcoal, then ground to a fine and sifted or powdered charcoal for obtaining a uniform size. • The next step is put into the basin , take a little flour (not too much to just 15% only) flour is used as a glue, and stir until evenly distributed, then enter the water gradually while stirring

Upload: sulthan-nabil

Post on 21-Apr-2015

124 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: Briquette of Durian Skin

Briquette of Durian Skin

How to make briquettes with durian skin as base material is as follows:

A. Equipment• The blades / cutters to chop / chop durian skin• Drum used for furnace• Sieve or strainer• Mixer• Wooden Grinder• Molding• Basin for Mixing• Zinc for drying

2. Material• Durian Skin

• Leaves or straw• Wheat starch (sago)• Water

3. Step Work• Previously Durian skin is cut into pieces or chopped, chop up a bit smaller in size in order to burn more quickly later.• After it is chopped or minced and then dried in the sun on a bed of zinc heated to the drying process faster.• Then prepare the drum on a flat ground , enter the twigs or straw first, followed by the skin has been sun-dried then insert a pile of straw or twigs but not too thick, burn the haystack and durian skin, cover with lid and create small holes in order to burn evenly and when there is no smoke coming out of the hole to open the lid and stir to make sure it has a charcoal, the combustion process should not be too long.• Lift and separate the combustion products before, which has been filtered and separated into charcoal, then ground to a fine and sifted or powdered charcoal for obtaining a uniform size.• The next step is put into the basin , take a little flour (not too much to just 15% only) flour is used as a glue, and stir until evenly distributed, then enter the water gradually while stirring (the water is given just 10% only) stir until the dough is really distributed.• Take the mold if there is no mold ,use your hands to print, which is mold, the way to mold it is to let the ingredient into it and let it dry , For hands. You can mold it according to the desired shape (round, oval, plots, etc.) from less dense and tight.• Dough that has been printed are going to dried on open sun beneatht the zinc , dried for 1/2 hours depending on the weather that support until it is completely dry.• After the last step is dried up and stored in a place that is not humid.

Page 2: Briquette of Durian Skin

Anti Mosquito Repellent

How to process the skin and flesh of the durian into Anti Mosquito Repellant are as follows

ingredients:• durian fruit• Alcohol

Ways of making:Outer skin of durian as much as 100 g cut into small pieces, then add 25 g durian flesh and 200 ml of water, then blend them. Strain the water, and add 30 ml of alcohol. After that pack in an electric Anti Mosquito medicine bottles size 45 ml (Can create about , approximately 23 bottles). A bottle can be used for 2-3 days nonstop. If you want to make in large quantities, liquid juice and the alcohol do not need to be mixed, wait until its going to be used, Then mix .

Dry Durian Batteries

Making a battery from dried skin of durian is easy . The trick is as follows:A. Peel the skin of durian before, select the white part.2. Mash until smooth.3. After that take the battery. the condition is an old battery and the other two elements, namely carbon batteries, and zinc are in good condition and not rusted.4. Dispose of charcoal in the battery.5. Inser the durian skin that had been crushed.6. Close the battery again.7. Check with AVO meter, it will show like the battery in general voltage.

This durian skin battery can last for 5 hours.