brochure 2015 zeno-protect entrance flooring systems
DESCRIPTION
Since 1997 Zeno-Protect is an independent quality-focused Dutch manufacturer of probably the best Entrance Flooring Systems. Our products keep the entrances of commercial buildings, schools and hospitals etc, safe and beautiful by stopping dirt, snow and water at the door to reduce interior maintenance costs. Zeno-Protect entrance flooring coverings includes 3 different products to meet every building’s aesthetics requirements and budget.TRANSCRIPT
E N T R A N C E F L O O R I N G2015
Bro
chur
e
Protect ExcellenceProtect Excellence is a distinction in the present ranges of products in this field, on account of an ingenuous combination of small and larger polyamide filements, resulting in an optimal density. Protect Excellence is produced by using solar energy. 33% of the yarns are recycled. Protect Excellence has a spontaneous design which not only hides the walked in dirt and moisture, but will result in a practically seamless floor.
ProgramCut length service available.Width: ca. 200 cm + 2 cm vinyl border.Rolls: length ± 25 metre.
610
607 608 609
604 605 606
601 602 603
PROTECT EXCELLENCE
*
Technical data
Method of manufacture Tufted 5/32” cut pile
Pile material 100% BCF polyamide (33% gerecycled yarns)
Primary backing Colbac™ non woven polyester
Secondary backing Comfort™ vinyl
Total weight ISO 8543 ca. 4260 g/m²
Pile weight ca. 1080 g/m²
Pile above backing ISO 8543 ca. 820 g/m²
Total height ISO 1765 ca. 9,7 mm
Pile height ISO 1765 ca. 6,5 mm
Pile density ISO 8543 ca. 0,127 g/cm³
Number of tufts ISO 1763 ca. 92990 /m²
Installation depth 9 mm
Use classification EN 1307 33, Commercial heavy
Luxury comfort EN 1307 LC3
Number of colors 10
Rolls ± 25 m, cut lengths service avialable
Width ca. 200 cm + 2 cm vinyl border
Suitable for castor chairs EN 985 A, intensive use r-3,1
Suitable for stairs EN 1963 Intensive use
Tuft withdrawal force ISO 4919 19 N
Electrical resistance ISO 10965 Hor. 2,6 x 1012 Ω / vert. 3,1 x 1011 Ω
Dimensional stability ISO 2551 Max. ≤ 2 mm
Acoustical insulation ISO 140-8 Δ Lw = 32 dB
Acoutical absorption ISO 354 Hz 125 250 500 1000 2000 4000
αω:0,25 S 0,00 0,06 0,16 0,24 0,34 0,37Colorfastness rating
Light ISO 105B02 6-7 (Max = 8)
Rubbing, dry ISO 105X12 5 (Max = 5)
Rubbing, wet ISO 105X12 4 (Max = 5)
Water ISO 105E01 5 (Max = 5)
Salt water ISO 105E02 4-5 (Max = 5)
Fire behavior EN13501-1 Cfl-s1
Slip resistance EN 13893 DS ↑0.44 μ,/ ┴ 0.47 μ
Static electric charging ISO 6356 Permanent anti-static
Thermal resistance ISO 8302 0,10 m² K/W
PROTECT EXCELLENCE
.
1=
G m
9 ,
g i
N
2
s
q
p
T
Z
L
e
.
PROTECT SUPER
Protect SuperThe exclusive use of coarse filament polyamide yarn in the manufacture of Protect Super provides an extra brush effect. Scan-dinavian research proved that Protect Super reduced levels of dust and improved indoor air quality which reduced absenteeism. Protect Super meets the highest standard for European Fire tests. Protect Super is ideally suited for heavily trafficked entrance, lobby or reception areas.
ProgramCut length service available.Width: ca. 200 cm + 2 cm vinyl border.Rolls: length ± 25 metre.
3012 302 3025
3042 305 3052
3055 3061 307
3071
PROTECT SUPER
Technical data
Method of manufacture Tufted 5/32” cut pile
Pile material 100% BCF polyamide
Primary backing Colbac™ non woven polyester
Secondary backing Comfort™ vinyl
Total weight ISO 8543 ca. 3820 g/m²
Pile weight ISO 8543 ca. 700 g/m²
Total height ISO 1765 ca. 9 mm
Pile height ISO 1766 ca. 6,9 mm
Pile density ISO 8543 ca. 0,102 g/cm³
Number of tufts EN1763 ca. 75500 /m²
Installation depth 8 mm
Use classification EN 1307 33, Commercial heavy
Luxury comfort EN 1307 LC3
Number of colors 10
Rolls ± 25 m, cut lengths service available
Width ca. 200 cm + 2 cm vinyl border
Suitable for castor chairs EN 985 A, intensive use r-3,1
Suitable for stairs EN 1963 Intensive use
Dimensional stability ISO 2551 Max. ≤ 2 mm
Acoustical insulation ISO 140-8 Δ Lw = 33 dB
Colorfastness rating
Light ISO 105B02 7-8 (Max = 8)
Rubbing ISO 105X12 4-5 (Max = 5)
Water ISO 105E01 5 (Max = 5)
Salt water ISO 105E02 4-5 (Max = 5)
Fire behavior EN 13501-1 Bfl-s1
Static electric charging ISO 6356 Permanent anti-static
Thermal resistance ISO 8302 0,10 m² K/W
PROTECT SUPER
*
PROTECT SUPERPROTECT SUPER
. 1 =
G m
9 ,
g i
2
s
p
R
Le
3012
3053042
Protect Solution
Protect Solution Clean-Off-Zone is made of high quality yarns which retain their rich lustre even with heavy foot traffic. Charac-teristics include resistance to wear, high colour retention and anti-static properties. Protect Solution is ideally suited for heavily trafficked smart areas.
ProgramCut length service available.Width: ca. 200 cm + 2 cm vinyl border.Rolls: length ± 25 metre.
501 502 503
504 505
PROTECT SOLUTION
Technical data
Method of manufacture Tufted 5/32” cut pile
Pile material Polypropylene
Primary backing Colbac™ non woven polyester
Secondary backing Comfort™ vinyl
Total weight ISO 8543 ca. 3550 g/m²
Pile weight ISO 8543 ca. 850 g/m²
Total height ISO 1765 ca. 9 mm
Pile height ISO 1766 ca. 7 mm
Pile density ISO 8543 ca. 0,091 g/cm³
Installation depth 8 mm
Number of colors 5
Rolls ± 25 m, cut lengths service available
Width ca. 200 cm + 2 cm vinyl border
Fire behavior EN 13501-1 Dfl-s1
Static electric charging ISO 6356 Permanent anti-static
PROTECT SOLUTION
* . 1 =
9 ,
V
L
.
.
.
STYCCOBOND F45 STYCCOBOND F74 STYCCOBOND F81 STYCCOBOND F84
THOMSIT K 188 E540 EUROSTAR SPECIAL640 EUROSTAR SPECIAL
SCHÖNOX EMICLASSICSCHÖNOX PU 900 (Component glue)
UZIN KR430 UZIN KE 66
SIGAN® ELEMENTS
MAPEI ULTRABOND ECO 170MAPEI ULTRABOND 333
Loose laidThe DDA (Disability Discrimination Act) states that loose lay should not be considered.
Glued down In frequently used areas the Zeno-Protect range of products should be adhered. The subfloor must be dry, smooth and stable. Adhesion must be carried out in accordance with instructions of the adhesive manufacturer. Note: Zeno-Protect B.V. cannot be held responsible for the performance of the recommended adhesive. This information is intended as a guide only. Use always an acrylic dispersion glue suitable for PVC!
The following products are recommended by adhesive manufacturers:
FITTING INSTRUCTIONS
FITTING INSTRUCTIONS
MAINTENANCE
Cleanfix BS 360 Art.nr 366.000LS50 HybridDynamic 300e / 380e / 450eRX Hepa 380e / 450e / 500e
Sebo Professional G1Sebo Professional G2
Sebo 370 / 470 ElectronicSebo Evolution
Nilfisk VU500Nilfisk GU305 / 355 / 455
Kärcher CV 38/2 professional Kärcher CV 48/2 professional
The Zeno-Protect Clean-Off-Zones are designed for use in entrances of buildings to stop the ingress of dirt and water from the outside. Therefore they become soiled with use. This dirt has to be removed in order to keep the Clean-Off-Zones effective. Recommend maintenance procedures
Periodically Protect Entrance floorcovering will collect grease and other sticky substances. A vacuum cleaner is ineffective. A water extraction machine is required to remove greasy soiling. Heavily soiled areas should be pre-treated before the machine is used. It is also recommended to run the machine with clean water (no detergents) to remove the last residues of soiling and detergents.It is important to remove residues of soiling and detergents, as residues will contribute towards shortening the soiling/cleaning cycle. Dry chemical systems (eg Host) are also useful for treating the soiled areas. The dry powder is worked into the pile, left to absord the soiling and then vacuumed out. When machines and chemicals are used the instructions of the manufacturers must be closely followed. .
Daily Thoroughly vacuum to remove grit, sand and dust. The pile should be agitated. Vacuum cleaners equipped with powerful suction and a rotating brush are most effective in dealing with this task. A vacuum cleaner is effective on dry soiling. It must be in good working order.
Vacuum cleaners recommended by the manufacturers:
100% environmentally friendly electricityOur Indoor Entrance Matting Systems are produced in technically-advanced production locations in accordance with ISO9001. The electricity we use for our production is generated by solar energy. It produces no waste and does not produce any carbon dioxide (CO2). Solar energy is a renew-able source of energy. The collection Protect Excellence 33% consists out recycled polyamide yarns.
5-YEAR WEAR GUARANTEE
COMPANY
About Zeno-ProtectSince 1997 Zeno-Protect is an independent quality-focused Dutch manufacturer of probably the best Entrance Flooring Systems. The founders of Zeno-Protect have a broad, international experience in the field of production and marketing of Entrance Flooring Systems. Through our relationships with our partners, we have created a stable and diverse supply chain that allows us to serve our customers in a cost-effective and responsible way.
Zeno-Protect B.V.
Oostenburgervoorstraat 132
1018 MR AMSTERDAM
The Netherlands
T +31 (0)88 835 93 66 = +31 (0)88-TEL-ZENO
www.entrance-flooring-systems.com