brochure hy inglese luglio 2014-ab cert - hydroarch s.r.lhydroarchsrl.com/brochure_en.pdf ·...

14/02/2017 HYDROARCH S.R.L. 1

HYDROARCH S.R.L. CONSULTING ENGINEERS

Chairman of the board: Dott. Ing. Catello Masullo Responsible of Quality System: Dott. Arch. Laura Ferretti VIA GIAN LUCA SQUARCIALUPO, 10 00162 ROMA - ITALY

TEL:++39-0686209885-3 FAX:++39-0686209875 Mobile ++39-337-749579 E-MAIL: [email protected] INTERNET: http://www.hydroarchsrl.com

THE COMPANY HYDROARCH s.r.l. is an independent technical-economic company of engineering consultants with high-level multidisciplinary competence. HYDROARCH was formed by pooling the technical experience and the professional and managerial capabilities of the experts concerned. HYDROARCH has directly carried out or participated in-through its individual members - a series of projects and measures in:

AFRICA ASIA SOUTH AND CENTRAL AMERICA

EUROPE

Algeria Iran Barbados Albania Benin Iraq Columbia Estonia Burkina Faso Indonesia Costa Rica Georgia Burundi Malaysia Ecuador Italy Cameroon Panama Yugoslavian Cape Verde Peru Kosovo Egypt U.S.A. Latvia Gambia Venezuela Poland Ghana Romania Guinea Russia Guinea Bissau Ukraine Kenya Madagascar Mali Maurice Islands Mauritania Morocco Niger Nigeria Rwanda Senegal Sierra Leone Sudan Tanzania Tchad Zambia Zaire


OFFICES OF ROME TThhee aaddddrreessss ooff tthhee RRoommee ooffffiiccee iiss:: VVIIAA GGIIAANN LLUUCCAA SSQQUUAARRCCIIAALLUUPPOO,, 1100 -- 0000116622 RROOMMEE -- IITTAALLYY TTeell:: ++++3399--00668866220099888855 // 00668866220099888833 FFaaxx:: ++++3399--00668866220099887755 EE--MMAAIILL:: sseeccrreettaarryy@@hhyyddrrooaarrcchhssrrll..ccoomm -- mmdd33224422@@mmcclliinnkk..iitt TThhoossee iinn cchhaarrggee ooff tthhee RRoommee ooffffiiccee aarree:: Dr. Eng. Catello MASULLO Chairman of the Board of Directors, Technical Director Dr. Arch. Laura FERRETTI Member of the Board of Directors, Responsible of QUALITY SYSTEM

INTERNATIONAL ORGANIZATIONS HYDROARCH is registered with the following international organizations:

THE WORLD BANK - U.S.A.

COMMISSION OF THE EUROPEAN COMMUNITIES-BELGIUM (n.H308)

ABU DHABI FUND FOR ARAB ECONOMIC DEVELOPMENT-UNITED ARAB

EMIRATES

THE INTER-AMERICAN DEVELOPMENT BANK-WASHINGTON

INTERNATIONAL LABOUR ORGANIZATION-GENEVA

AFRICAN DEVELOPMENT BANK-IVORY COAST

UNITED NATIONS DEVELOPMENT PROGRAMME-UNITED STATES

ISLAMIC DEVELOPMENT BANK-SAUDI ARABIA

THE ARAB BANK FOR ECONOMIC DEVELOPMENT IN AFRICA-KHARTUM SUDAN

THE WORLD HEALTH ORGANIZATION-GENEVA

ASIAN DEVELOPMENT BANK-MANILA PHILIPPINES

UNITED NATIONS IDUSTRIAL DEVELOPMENT ORGANIZATION-AUSTRIA


FIELD OF ACTIVITY HYDROARCH's main sectors of activity are:

RIVER TRAINING AND CORRECTION WORKS

DAMS

REGIONAL PLANNING

AQUICULTURE AND FISHERY

AGRICULTURAL DEVELOPMENT

ARCHITECTURE

WATER TREATMENT

HYDROELECTRIC PLANTS

ENVIRONMENTAL IMPACT EVALUATION

WATER SUPPLY

WASTE DISPOSALS

SAFETY IN WORK ENVIRONMENTS

(D.Lgs 626/94)

MARITIME STRUCTURES

ENERGY AND PLANT

ENGINEERING

PROJECT CONTROL AND MONITORING

TRANSPORTS

RAILWAYS

SAFETY IN THE YARDS

(D.Lgs 494/96)

GEOGRAPHIC INFORMATION SYSTEM (G.I.S.)


OFFERED SERVICES The technical and economic consulting services offered by HYDROARCH in the sector of activity listed above include the following, among others:

- Every activity concerning service concessions;

- Technical and economic assistance to the finding of funds at national and

international organizations;

- Economic, socio-economic and financial studies;

- Environmental impact assessments;

- Preliminary and feasibility studies;

- Detailed designs;

- Detailed designs under construction;

- Preparation of contract/tender documents;

- Bills of quantity and estimates;

- Expropriation procedures;

- Assistance in contract award phases;

- Publications and realization of competition procedures until the award;

- Work supervision, control and overseeing;

- Technical assistance and staff training.

Each project is carefully assessed from the socio-economic aspect to ensure its optimal suitability and adaptability to the technical and economic structures and to the development plans of the Client's country. The concrete training programmes are prepared and carried out according to the advancement of each project, in order to guarantee their success when their management is handled over to the Client. The training programmes are tailored to the Client's specific requirements and are managed in such a way as to achieve the maximum efficiency in the process of “know-how” actual transfer.


ORGANISATION OF TECHNICAL STRUCTURES HYDROARCH's technical structures are backed by the professional experience and the working means of its members, its staff, its collaborators and those of its associated companies. In particular HYDROARCH, thanks also to the university activity of some of its members, in the Department of Hydraulics, Transport and Highways of Rome University, has developed special wholly automated project implementation techniques. These techniques have been developed and are applied with the use of high-capacity computers and of "intelligent" peripheral units such as plotters, digitizers, video-graphic units, etc. The considerable pool of mathematical and physics programs applied to the relevant designs, together with the great elasticity and flexibility of the organization, gives HYDROARCH unquestioned competitiveness regarding costs, quality and above all the use of traditional techniques. Below-merely by way of example-are brief illustrations of some of the automatic calculation and design programs available in HYDROARCH's computer centre, subdivided according to the various fields of specialization. A. AUTOMATIC CALCULATION A.1 Road and railway engineering Analyse statique en champ élastique bi et tridimensionnelle de structures

quand même complexes (programmes STRESS, STRUDL, MESS). Analyse dynamique linéaire et non linéaire, bi et tridimensionnelle

(programme ETAB). Analyse aux éléments finis de structures, lineaire et non linéaire, statique

et dynamique (programmes SAP, NON SAP, ADINA, NASTRAN). Analyse de la distribution thermique à l'interieur de structures (programme

ADINAT). Automatic calculations of layout data (Leonardo Program) Automatic calculations and design of widening in curves, transition

curves, cross slopes, etc. (Leonardo) Automatic verifications of Italian rules C.N.R. (Leonardo) Automatic calculations of earth work quantities.

A.2 Structural engineering Static analysis in 2 and 3 dimensional elastic field of structures of all

degrees of complexity (STRESS, STRUDL, MESS programmes). Dynamic 2 and 3 dimensional linear and non-linear analysis (ETAB

programme) Finite elements analysis of plane and spatial, linear and non-linear, static

and dynamic structures and solids (SAP, NONSAP, ADINA, NASTRAN programmes)

Analysis of heat distribution in solids and structures (ADINAT programme).

A.3 Hydraulic engineering A.3.1) Pressurised networks Analysis and optimisation of horizontal alignments (UKILT programme) Hydraulic checks of closed and open pressurised networks Optimisation of commercial diameters of closed and open networks

(OPTIM using GOROMOV algorithm) Optimisation of vertical alignments: grade lines of foundations, outlets and


air vents (AUTOLIV programme) Automatic design of hydraulic nodes with special mass-produced or steel

items (CLAVIA programme) Automated quantity assessment and estimating, with grouping by work

category Analysis of varied elastic and overall motion in all types of networks, with

characteristics method (ARIES programme) A.3.2) Free surface networks Analysis and optimisation of horizontal alignments (UKILT programme Hydraulic checks in permanent motion and in varied motion (automatic

determination of backwater profiles, analysis of flood propagation, tidal channels, etc. (PRORIG and FLOOD programmes)

Optimal design of sections and excavation, with pre-set rates and longitudinal slope limits (VERFO programme)

Simulation of diffusion of pollutants in canal networks with varied motion (SWWM programme)

Automated calculation of bills of quantities and breakdown by work category.

A.3.3) Hydraulic checks of special works 2 and 3 dimensional analysis in permanent motion and in varied motion of

the Kinetic field at main spillways or side-weirs, gates and sluices, bridge piers, etc. (ADINAT programme)

Optimal geometry of reclaimed canals and river training works.

A.4 Systems management Optimum resource allocation even with uncertainty as to demand and

supply, with linear or mixed programming techniques (FMPS programme)

Optimum management of hydraulic system, however complex, in real time (GEST programme)

Optimum programme of operation at pre-set time scale of water supply networks

Optimum management of reservoir complexes of limited capacity with inflows varying in time and evaporation as a function of time and evaporation as a function of time and reservoir level (DAM programme)

Optimum sequencing of construction phase of pressurised hydraulic networks (OPC programme)

Optimum management of maintenance and storage programmes for a system, however complex (MAINT programme)

A.5 Geotechnics Slope and embankment stability analysis (STABL programme,

Morgenstein and Price, Janbu, Fellenius, Bishop, etc. methods) 2 and 3 dimensional analysis of filtration with possible presence of wells

and springs in acquifers, of any complexity, in permanent or varied motion, with finite elements techniques (ADINAT programme).

A.6 Applied statistics Statistical analysis of hydrological time series with Montecarlo techniques

(flood, low water, etc. forecasts) Analysis of extreme events (Gumbel, Galton, Frechet, truncated series,

etc. methods) Correlation and regression analyses.

A.7 Technical-administrative documents Form for automatic integrated management of price analysis, price lists,

price revision and works accounting Computerised forms for special specification, offers, reports, etc. (DMS

programme).


B. COMPUTERIZED GRAPHICS B.1 General graphics 2 dimensional contour representation (GPCP2, CONTOUR programme) 3 dimensional perspective views (THREED programme) Diagrams of functions at linear and non-linear scales, "cake" diagrams

(DATAGRAPH programme). B.2 Applied graphics Automatic tracing of planimetries, road or railway profiles and sections;

automatic determination of tracing data; automatic tracing of broadening in curve, transition curves, transversal inclinations, etc. (LEONARDO program).

Automatic adjustment to C.N.R. normative (LEONARDO program). Automatic contour plotting of dimension plans and digital models

(GPCP2, CONTOUR program) Vertical profiles and cross sections at distorted scale or otherwise (with

relevant automatic computations of area and volumes). (LLPP programme)

Schematic graphic representation of hydraulic nodes for pipe networks (with relevant bills of quantities for special items). (Cf. CLAVIA programme).

Generalised programme for interactive construction of graphs, architectural plates, technical drawings, etc. (GKS programme)

Graphic parameters of typical structures (sumps for water supply and sewerage works, pumping plants, balancing tanks and reservoir, delivery units, etc.), interconnected with static, hydraulic and estimation programmes.

Computerized graphics through the aid of AUTOCAD 14. C. TERRITORIAL INFORMATIVE SYSTEMS Program "GHEO", projected and realized for the management of Territorial Informative Systems (T.I.S.): it

allows to treat in way totally integrated the graphic information (coordinate graphics of the entities and relationships topological among them) and the descriptive information associated to it. GHEO is implemented on the operating systems DOS (extensive), UNICS, Windows NT, Windows 95 and it uses an architecture client-server; introduces himself to the consumer with the interface of AutoCAD and it bases himself on the most diffused report database SQL for the management of descriptive information. The inside structure of GHEO graphic data is able to treat in efficient and fast way the notable quantity of information typical of the S.I.T., assuring the connectivity and the inexpensiveness of the environment Personal Computer Standard. Modules expressly developed in C language they enrich of specialized functions the standard environment AutoCAD and they allow the integrated management of data banks that compose the system:

Graphic Data Bank (GDB) Descriptive Data Bank (DDB) Raster Images Data Bank (RDB) GHEO allows the management of net infrastructures both in pressure (water and gas) both by gravity

(sewerages), the management of data banks, management of the Territorial Informative Systems for the Fiscal equity (control of the territory for the collection of the I.C.I.) through:

- The management of General Land Office data bank - The updating of General Land Office archives and formation of planimetric cards numerical archives - The revision of real estate classification with the possible subdivision of the territory in the homogeneous

micro-zones; - The attribution of the internal civic numeration of real estate; - The management of urban development plan and building sites; - The formation of tax register and urban real estate.


KEY PERSONNEL AND MAIN CONSULTANTS Below are brief descriptions of some of the most representative associates, Key personnel and main consultants of HYDROARCH. Catello MASULLO: Chairman of the Board of Directors of HYDROARCH. Technical Director.

Hydraulic engineer. Lecturer of “Hydraulic Systems Management” of the Engineering Faculty of Rome 3. Former (for 25 years) Assistant Lecturer on Hydraulic, Road and Transport Department of the Engineering Faculty of “LA SAPIENZA” Rome University. Has acted as Project Manager for the design of major civil engineering structures, chiefly specialized in hydraulic works, road, railway, transport. Formerly in charge of Dams Sector of the Lucio Santovito company, and Project Manager in Bonifica S.p.A. (IRI-ITALSTAT Group). Member of the panel of experts in Road, Railways, Subways, Transport and traffic studies for Jubilee of the year 2.000 in Rome for the President of the Council of Ministers of Italian Government. Member of the Italian National Large Dams Commission, of the "Associazione Idrotecnica Italiana" and of the "Associazione Nazionale di Ingegneria Sanitaria". He is the author of many research publications in the field of hydraulic constructions and transport sector. Member of "International Water Resources Association". TECHNICAL DIRECTOR of HYDROARCH.

Laura FERRETTI: Hydroarch's associate. Member of the Board of Directors of

HYDROARCH, Architect, with professional experience in the fields of environmental impact studies, urban planning, architectural composition, urban furniture, interior design, etc. Responsible for the Urbanistic Sector of HYDROARCH. Responsible of QUALITY SYSTEM.

Aldo MENDUNI: Responsible of the sector TERRITORIAL INFORMAIVE SYSTEMS AND

EXPROPRIATION PROCEDURES of Hydroarch. Expert in utilization of exclusive software “GHEO” for the management of the Territorial Informative Systems and in the management of the whole iter of expropriation procedures.

Fabrizio LANZA: Responsible of the sector STRUCTURES AND GREAT

MANUFACTURES of Hydroarch, he matured a great professional experience in the field of reinforced concrete, pre-stressed concrete and steel structures project.

Enrico SERMONTI: Hydroarch's associate. Agronomist. Responsible of the FARM

HOLIDAYS , AGRONOMY and AGRICULTURAL MECHANIZATION. Great experience in agronomic studies, culture arrangements, breeding, agricultural mechanization.


Paolo D'ANGELO: Hydroarch's associate. Head of HYDROARCH's PRODUCTION,

CONTRACT DETAILED LISTS and ACCOUNTING DOCUMENTS Sector. Drawing up of contract and accounting documents, project and accounting for civil works.

Roberto BLUNDO Hydroarch's associate. Head of HYDROARCH’s WATER TREATMENTS

Sector. Marine biologist. Holder of international patents of BIOCATALYTIC PROCESS utilizing sea bacteria for water treatments (groups of Pseudomonas familial as the “petroleum eating bacteria”) for the purification of the waters and the neutralization of solid waste.

Franca CIPOLLONE: Hydroarch's associate. Economist. Head of HYDROARCH's PROJECT

EVALUATION. Professional experience of economic-financial analysis of engineering works with particular specialization in drawing up F.I.O. evaluation documents and evaluation foreseen in article n. 4 law 64.

Salvatore LANZALACO: Hydroarch's associate. Engineer. Responsible for the FOREIGN

IRRIGATION Sector of HYDROARCH. Project chief in numerous projects of integrated development, irrigation, infrastructures in numerous developing countries.

Guido DI CAPUA Hydroarch's associate. Mechanical Engineer Responsible for the

Sector of DISPOSAL OF URBAN SOLID WASTE, SPECIAL, TOXIC AND NOXIOUS WASTE.

Romano FIDORA: Hydroarch's associate. Responsible for the Sector of PROJECT

MONITORING and QUALITY CONTROL. Giuseppe LA CORTE: Hydroarch's associate. Responsible for the Building Details Sector of

HYDROARCH. Architect. Professional experience in civil works projects, with specialization in building details.

Giovanni CATALDI: Hydroarch's associate. Professional experience in the field of large road

and highways. Maurizio FUMO: Hydroarch's associate. Sociologist, Responsible for the SOCIOLOGICAL

Sector. Expert in the field studies on sociological and socio-economic aspects.

Walter Maria SANTORO Hydroarch's associate. Civil Engineer. Responsible for the ROAD sector.

Expert in project of heart dams, studies about slope stability, geotechnical engineering.


Honorè ASSOGBA: Hydroarch's associate. Agronomist. Responsible for the AGRONOMY

AND PEDOLOGY Sector in developing countries. Eliseo ZICCARDI: Hydroarch's associate. Head of the Geology Sector of HYDROARCH.

Geologist with long experience in geologic and geotechnical surveys, slope stability, geophysical and geognosy surveys. Strategical Manager of Geoservice s.r.l.

Andrea PONTICELLI: Hydroarch's associate. Responsible for the HYDROCULTURE Sector of

HYDROCARCH. Biologist, expert in project, work supervision and management of hydroculture and fishing installations.

Andrea SCARIENZI: Hydroarch’s associate. Responsible for the AUTOMATION Sector.

Electrical Engineer highly qualified in hardware systems design and construction, and in software systems production.

Domenico FREDUCCI: Hydroarch's associate. Responsable of HYDROARCH's Rail Ways

Sector, with great professional experience in design and work supervision of railways and road infrastructures, topographic surveys and yard tracings.

Francesca GIORGI Hydroarch employee. Responsible of Competitions secretariat and

Foreign Accounting. Competitions editing and foreign order accounting.

Claudia FORTE Hydroarch employee. Responsible of Accounting and Purchasing.

Management of Italian accounting. Competitions editing


ORGANISATION OF THE QUALITY MANAGEMENT SYSTEM In July 2002, Hydroarch obtained the Certification of Quality. From 2014 is certified with AB Certification [Italian delegation - via Revere 10-20123 Milan - Italy] according to the UNI EN ISO 9001_2008.


General requirements In order to realize the Quality Management System - QMS (Sistema di Gestione di Qualità - SGQ), HYDROARCH has:

Prepared a Manual of Quality (MQ) according to the QMS procedures; Identified the processes necessary to the QMS, in accordance with the

requirements cited in the regulations of reference (UNI EN ISO 9001:2008); Established the sequences and interactions among the processes, criteria and

methods to ensure their effectiveness; Realised the QMS applying the documented procedures; Determined the work instructions; Determined and documented how quality requirements will be fulfilled; Established a planning of quality consistently with the QMS specific

requirements; Prepared the quality plans for contracts as well as a quality control plan; Defined the instruments and equipment and specified the necessary resources; Registered all the necessary information for the QMS effectiveness; Ensured the availability of the required information to support the actions and

the monitoring of the processes; Measured, monitored, analysed the processes and undertook all the necessary

actions to achieve the expected results and the constant improvement of the QMS.

CONSTANT IMPROVEMENT OF THE QUALITY MANAGEMENT SYSTEM

CUSTOMER REQUIREMENTS

Management’s responsibility

Improvement’s evaluation and

analysis indicators

Resources Management

CUSTOMER’S satisfaction

INDICATORS

Questionnaire of satisfaction

Inputs Outputs

Service Product’s execution


General requirements of the QMS documentation The HYDROARCH’s QMS documentation includes the documents required to ensure the effective running and the monitoring of processes. These are:

the MQ; the Procedures; the working Instructions; the Forms;

Manual of Quality Hydroarch determines and defines the processes, which form the Quality Management System (QMS), through the “Manual of Quality” (MQ) that set out:

the Quality Policy;

the Firm’s Organization;

the Processes;

the Responsibility;

the ways of development and the specific responsibilities of the activities and the firm’s fundamental processes.

The Manual of Quality includes the QMS Procedures, which define the responsibilities and the ways of management of the firm’s processes in accordance with the regulation of reference.

The MQ is the reference document:

for the firm’s personnel who can find in it a guide on how to operate,

for the customers and the Organism of certification that find in it the necessary elements to verify if the firm satisfy the requirements of quality management and the requirements of satisfactions of the customer and the concerned subjects.

The MQ prescriptions concern all the functions and the personnel of HYDROARCH, all the services and activities carried out by the society, inside and outside. These prescriptions are approved and therefore made effective for the whole staff, by the PoBD (President of the Board of Directors) who subscribe the MQ and its subsequent revisions.

The MQ of HYDROARCH S.r.L. have been structured according to the regulation UNI EN ISO 9001:2008 : Sistemi di gestione per la Qualità (Quality Management Systems).


Field of Application of the Quality Management System

The Quality Management System described in the Manual of Quality is applied to ensure that the services supplied by the firm meet the requirements of the Customer, the market and the laws and regulations in force. The fulfilment of these requirements is guaranteed by the management of the processes described in the Manual of Quality.

Hydroarch’s Manual of Quality is based on the requirements provided for by the Basic Regulation ISO 9001 with no exclusion.

Planning of the Service’s Implementation

HYDROARCH can implement its activities in all the project cycle’s phases solving the problems typical of each phase: in the preliminary and definitive ones interacting with the territorial institutions interested in the infrastructure; in the executive one attending to the project’s implementation according to the specific requirements of the customer institution; during the building phase working with the firms that realise the work, following the activities, solving the technical problems and minimizing the non- productivity periods.

SUPPORT PROCESSES

MAIN PROCESSES

TRADING

SERVICE’S PLANNING

IMPROVEMENT COMMUNICATION ECC.

SUPPLYING RESOURCES MANAGEMENT

DOCUMENTATION MANAGEMENT

SERVICE OF PLANNING

SERVICE OF WORKS DIRECTION

TECHNICAL ADMINISTRATIVE ASSISTANCE TO THE PROCESS’ PERSON IN CHARGE

TECHNICAL ASSISTANCE

C USTOMER

C USTOMER

Inputs Service Supply


Board of Directors

Responsible for Prevention e Protection

Secretariat

Technical Director Responsible for the

Quality System

Competition Office Responsible of the

Privacy

Chairman of the Board of Directors

Administrative Director

Responsible of Competition Secretariat and Foreign Accounting

Project Team Project Financial and Contracts Manager

Project Manager

Responsible of Sector

Sale Manager

Freelances

Translation Office

HYDROARCH S.R.L. ORGANIZATION PROFILE

Hydroarch’s responsibilities, concerning the activities that influence the quality of the services, are defined and communicated within the society.

brochure hy inglese luglio 2014-ab cert - hydroarch s.r.lhydroarchsrl.com/brochure_en.pdf ·...

Documents