Brother 1034d Serger Cover

1 http://swoodsonsays.com/simple-brother-1034d-serger-cover-sewing-tutorial/

Simple Brother 1034d Serger Cover Sewing Tutorial

Brother 1034d Serger Cover

2 http://swoodsonsays.com/simple-brother-1034d-serger-cover-sewing-tutorial/

We had hardwood floors installed in our new house and the dust and debris it left in our basement (where my sewing room is) was unreal. I quickly made a serger cover to keep it clean and then tweaked the pattern and tutorial to make my Mom one for her birthday! This tutorial is really simple; you could customize it with applique, embroidery, patchwork, really anything. My Mom picked out the fabrics so I decided to keep it plain and let them shine.

{This post contains affiliate links, indicated by an asterisk*. Please refer to ‘legal stuff’ in the top menu for more info.}

Brother 1034d Serger Cover

3 http://swoodsonsays.com/simple-brother-1034d-serger-cover-sewing-tutorial/

I absolutely love my Brother 1034d serger* – I use it for all my knit projects (which is pretty much everything my son and I wear) and for finishing seams on woven projects that will take a lot of abuse, like curtains, beanbags, etc. Embarrassingly, I bought it when I very first started sewing – my first project was a bunch of cotton wipes for cloth diapering and I was immediately a fan. It’s been used heavily for the past two+ years and I’ve had zero issues. People moan about threading it, but it really isn’t bad once you do it a few times! I highly recommend it.

Brother 1034d Serger Cover

4 http://swoodsonsays.com/simple-brother-1034d-serger-cover-sewing-tutorial/

Supplies • 1/2 yard of accent fabric (blue – Facet by Maude Asbury) & 1/2 yard of main fabric (red –

Folklore by Heather Rosas) • 2 yards of fusible fleece* (I used Pellon brand) • Iron • Coordinating thread & sewing machine

Steps The entire project is sewn with a 3/8″ seam allowance.

Brother 1034d Serger Cover

5 http://swoodsonsays.com/simple-brother-1034d-serger-cover-sewing-tutorial/

1. Draw out your side piece pattern. You can create an actual pattern piece or simply measure and cut; I measured and cut with my rotary cutter and quilt rulers so I drew a little mock-up of the shape with the measurements. Cut 4 of the shaped sides, mirrored so one is reversed – 2 of fusible fleece, 2 of nice fabric. Cut 2 long rectangles, 1 of fusible fleece, 1 of nice fabric, measuring 15″ by 34″. Press to fuse the fleece to the back of each nice fabric piece.

If you’re doing any embellishing, now is the time! On my version I put a handle – it was about 16″ up from the front hem of the rectangle. I don’t actually use it very often so I didn’t include it in this tutorial/my Mom’s.

Brother 1034d Serger Cover

6 http://swoodsonsays.com/simple-brother-1034d-serger-cover-sewing-tutorial/

2. Lay the two pattern pieces right sides together (RST), with the straight edges aligning. You’re going to start sewing the longest (13″) side first, pivoting around so the rectangle goes along the entire side.

3. To make a nice sharp corner, stop with your needle down, 3/8″ from the edge of the corner. Pull up your presser foot with the needle still down.

Brother 1034d Serger Cover

7 http://swoodsonsays.com/simple-brother-1034d-serger-cover-sewing-tutorial/

4. Pivot the pieces around, keeping them RST. You may need to use a seam ripper or pen to smooth out the fabric underneath – any excess can be pulled towards the left/back so you have a smooth line to continue sewing with the 3/8″ seam allowance, Continue all the way around, pivoting at each corner.

5. Lay the second side piece RST and repeat, sewing the longer 13″ side, up, and around. Trim any unevenness around the bottom where the panels meet. Press all seams open.

Brother 1034d Serger Cover

8 http://swoodsonsays.com/simple-brother-1034d-serger-cover-sewing-tutorial/

6. Trim down the seam allowance and clip each corner so they poke out better, making sure not to clip through the stitching.

7. Turn the bottom raw edge up 1/2″ all the way around, press. Stitch to hem, press. You’re done!