bs identifier title committee status final review …...bs identifier title committee status final...
TRANSCRIPT
BS identifier Title Committee Status Final Review Outcome
BS 10:2009 Specification for flanges and bolting for pipes, valves and fittings
PSE/15 Current Confirmation
BS 10012:2009 Data protection. Specification for a personal information management system
IDT/1 Current Confirmation
BS 1016-6:1977 Methods for analysis and testing of coal and coke -- Ultimate analysis of coal
PTI/16 Partially replaced by Sections and subsections of BS 1016
Withdrawal
BS 1016-7:1977 Methods for analysis and testing of coal and coke -- Ultimate analysis of coke
PTI/16 Partially replaced by Subsections of BS 1016
Withdrawal
BS 1016-8:1977 Methods for analysis and testing of coal and coke -- Chlorine in coal and coke
PTI/16 Partially replaced by BS 1016-106.6.1:1997
Withdrawal
BS 1098-1:1967 Specification for jig bushes -- Inch units MTE/18 The requirements for metric units in BS 1098:1967 prior to its re-numbering as BS 1098-1:1967 have been replaced by BS 1098-2:1977
Withdrawal
BS 11:1985 Specification for railway rails RAE/2 Obsolescent (2012) Revision in progress
BS 1113:1999 Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
PVE/2 Obsolescent (2012); Replaced by Parts 1, 2, 3, 5, 6, 7, 10 and 11 of BS EN 12952 and has been declared obsolescent
Confirmation
BS 1199 and 1200:1976
Specifications for building sands from natural sources
B/502 Obsolescent (2012); Replaced by BS EN 13139:2002
Confirmation
BS 1210:1963 Specification for wood screws FME/9 Obsolescent (2012) Withdrawal
BS 122-4:1980 Milling cutters -- Screwed shank end mills and slot drills
MTE/18 Confirmed (2009) Reconfirmation
BS 1339-2:2009 (CD-ROM)
Humidity -- Humidity calculation functions, tables and user guide
CPI/29 Current Confirmation
BS 1344-18:1981
Methods of testing vitreous enamel finishes -- Determination of fluidity behaviour: fusion flow test
STI/36 Current Confirmation
BS 1344-4:1968 Methods of testing vitreous enamel finishes -- Resistance to abrasion
STI/36 Current Confirmation
BS 1370:1979 Specification for low heat Portland cement B/516/6 Confirmed (2009) Reconfirmation
BS 1438:2004 Aggregates. Single-sized aggregates for use as a medium in biological percolating filters
B/502 Confirmed (2009) Reconfirmation
BS 144:1997 Specification for coal tar creosote for wood preservation
B/515 Confirmed (2009) Reconfirmation
BS 1468:1967 Specification for tin anodes and tin salts for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 148:2009 Reclaimed mineral insulating oil for transformers and switchgear. Specification
GEL/10 Current Confirmation
BS 1553-1:1977 Specification for graphical symbols for general engineering -- Piping systems and plant
TDW/4 Current Confirmation
BS 1553-2:1950 Specification for graphical symbols for general engineering -- Graphical symbols for power generating plant
TDW/4 Current Confirmation
BS 1553-3:1950 Graphical symbols for general engineering. -- Graphical symbols for compressing plant
TDW/4 Current Confirmation
BS 1561:1966 Specification for silver anodes and silver salts for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 1571-2:1975 Specification for testing of positive displacement compressors and exhausters. -- Methods for simplified acceptance testing for air compressors and exhausters
MCE/8 Confirmed (2009) Reconfirmation
BS 1640-1:1962 Specification for steel butt-welding pipe fittings for the petroleum industry -- Wrought carbon and ferritic alloy steel fittings
ISE/110 Partially replaced by BS EN 10253-2:2007
Withdrawal
BS 1640-3:1968 Specification for steel butt-welding pipe fittings for the petroleum industry -- Wrought carbon and ferritic alloy steel fittings. Metric units
ISE/110 Partially replaced by BS EN 10253-2:2007
Reconfirmation
BS 1722-16:2009
Fences -- Specification for powder coatings used as a plastics finish to components and mesh
B/201 Current Confirmation
BS 1726-2:2002 Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing -- Extension springs
FME/9/3 Confirmed (2009) Reconfirmation
BS 1726-3:2002 Cylindrical helical springs made from round wire and bar. Guide to methods of specifying, tolerances and testing -- Torsion springs
FME/9/3 Confirmed (2009) Reconfirmation
BS 1727:1987 Specification for motors for battery operated vehicles
PEL/69 Confirmed (2009) Reconfirmation
BS 1790:1961 Specification for length bars and their accessories (imperial units)
TDW/4 Current Confirmation
BS 1872:1984 Specification for electroplated coatings of tin STI/33 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 1881-121:1983
Testing concrete -- Method for determination of static modulus of elasticity in compression
B/517/1 Current Confirmation
BS 1881-128:1997
Testing concrete -- Methods for analysis of fresh concrete
B/517/1 Obsolescent (2011) Withdrawal
BS 1881-204:1988
Testing concrete -- Recommendations on the use of electromagnetic covermeters
B/517/1 Current Confirmation
BS 1881-206:1986
Testing concrete -- Recommendations for determination of strain in concrete
B/517/1 Current Confirmation
BS 1881-207:1992
Testing concrete -- Recommendations for the assessment of concrete strength by near-to-surface tests
B/517/1 Current Confirmation
BS 1881-208:1996
Testing concrete -- Recommendations for the determination of the initial surface absorption of concrete
B/517/1 Current Confirmation
BS 1881-209:1990
Testing concrete -- Recommendations for the measurement of dynamic modulus of elasticity
B/517/1 Current Confirmation
BS 1892-1:1986 Gymnasium equipment -- Specification of general requirements
SW/136/22 Obsolescent (2012); Partially replaced by BS EN 913:1996
Withdrawal
BS 1892-2.11:1989
Gymnasium equipment. Particular requirements -- Specification for practice and games netting and supporting trackways
SW/136/22 Current Confirmation
BS 1892-4:2003 Gymnasium equipment -- Sports mats. Specification for combat mats
SW/136/22 Current Confirmation
BS 1894:1992 Specification for design and manufacture of electric boilers of welded construction
PVE/2 Partially replaced by BS EN 12953-8:2001
Withdrawal
BS 1902-10.1:1993
Methods of testing refractory materials. Investment casting shell mould systems. -- Determination of resistance to deformation at elevated temperatures
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-10.2:1994
Methods of testing refractory materials. Investment casting shell mould systems -- Section 10.2: Determination of permeability and standard air flow capacity at elevated temperatures
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-4.0:1985
Methods of testing refractory materials. Properties measured under an applied stress. -- Introduction
RPI/1 Confirmed (2009) Withdrawal
BS 1902-4.6:1985
Methods of testing refractory materials. Properties measured under an applied stress -- Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.0:1992
Methods of testing refractory materials. Refractory and thermal properties -- Introduction
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.11:1986
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal spalling resistance by the prism test (method 1902-511)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.13:1984
Methods of testing refractory materials. Refractory and thermal properties -- Determination of resistance to attack by slag (method 1902-513)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.14:1992
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal expansion (temperatures up to 1500$0DC) (methods 1902-5.14)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.3:1990
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal expansion (horizontal method to 1100$0DC) (method 1902-503)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.5:1991
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal conductivity (panel/calorimeter method) (method 1902-505)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-5.8:1992
Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal conductivity (split column method) (method 1902-508)
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-6:1986 Methods of testing refractory materials -- Ceramic fibre products
RPI/1 Confirmed (2009) Reconfirmation
BS 1902-9.1:1987
Methods of testing refractory materials. Chemical analysis by instrumental methods -- Analysis of alumino-silicate refractories by X-ray fluorescence
RPI/1 Confirmed (2009) Withdrawal
BS identifier Title Committee Status Final Review Outcome
BS 1902-9.2:1987
Methods of testing refractory materials. Chemical analysis by instrumental methods -- Analysis of silica refractories by X-ray fluorescence
RPI/1 Confirmed (2009) Reconfirmation
BS 1916-1:2009 Limits and fits for engineering -- Guide to limits and tolerances
TDW/4/10 Current Confirmation
BS 1916-2:2009 Limits and fits for engineering -- Guide to the selection of fits in BS 1916-1
TDW/4/10 Current Confirmation
BS 1916-3:2009 Limits and fits for engineering -- Guide to tolerances, limits and fits for large diameters
TDW/4/10 Current Confirmation
BS 1983-1:1969 Specification for chucks for machine tools and portable power tools. -- Tool-holding chucks
MTE/18 Confirmed (2009) Reconfirmation
BS 2050:1978 Specification for electrical resistance of conducting and antistatic products made from flexible polymeric material
PRI/22/-/5 Obsolescent (2012); Partially replaced by BS ISO 2878:2005
Withdrawal
BS 2062-1:1959 Specification for gear hobs -- Hobs for general purposes, 1 d.p. to 20 d.p. inclusive
MCE/5 Replaced by BS 5221:1975, until international agreement is reached on tolerances
Withdrawal
BS 2062-2:1960 Specification for gear hobs -- Hobs for gears for turbine reduction and similar drives
MCE/5 Replaced by BS 5221:1975, until international agreement is reached on tolerances
Withdrawal
BS 2087-1:1992 Preservative textile treatments. -- Specification for treatments
TCI/80 Obsolescent (2011) Withdrawal
BS 2087-2:1992 Preservative textile treatments. -- Methods of test
TCI/80 Obsolescent (2011) Withdrawal
BS 2468-3:1995 Glossary of terms and classification relating to agricultural machinery and implements -- Soil working equipment
AGE/32 Confirmed (2006) Reconfirmation
BS 2482:2009 Specification for timber scaffold boards B/514/42 Current Confirmation
BS 2523:1966 Specification for lead-based priming paints STI/21 Obsolescent (2012); Partially replaced by BS 5082:1974 and BS 5358:1976
Withdrawal
BS 2538:1954 Specification for air-cooled flameproof single-phase lighting transformer units supplied from high voltage systems
MRE/3 Obsolescent (2011) Withdrawal
BS 2571:1990 Specification for general-purpose flexible PVC compounds for moulding and extrusion
PRI/82 Confirmed (2009) Reconfirmation
BS 2572:1990 Specification for phenolic laminated sheet and epoxy cotton fabric laminated sheet
GEL/15/6 Partially replaced by BS EN 60893-3-4:1995
Withdrawal
BS 2573-1:1983 Rules for the design of cranes -- Specification for classification, stress calculations and design criteria for structures
MHE/3/1 Replaced by BS EN 13001-1:2004+A1:2009, BS EN 13001-2:2004+A3:2009, DD CEN/TS 13001-3.1:2004 and DD CEN/TS 13001-3-2:2004 until part 3-3 of the series is published. Together with BS 2573-2:1980, replaced by BS EN 13001-1:2004+A1:2009, BS EN 13001-2:2011,
Reconfirmation
BS 2574-1:1991 Lower limb orthoses. -- Guide to the design and manufacture of lower limb orthoses, excluding foot orthoses
CH/168 Confirmed (2009) Reconfirmation
BS 2574-2:1994 Lower limb orthoses. -- Specification for hip, knee and ankle joints for lower limb orthoses
CH/168 Confirmed (2009) Reconfirmation
BS 2606:1955 Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak
CH/62/2 Obsolescent (2012) Withdrawal
BS 2621-5:1979 Specifications for glycerol CII/26 Confirmed (2009) Withdrawal
BS 2655-1:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for electric, hydraulic and hand-powered lifts
MHE/4 Obsolescent (2012); Partially replaced by Parts 1, 2, 3 and 14 of BS 5655
Reconfirmation
BS 2655-10:1972
Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for guarding
MHE/4 Obsolescent (2012); Partially replaced by BS 5655-1:1979, BS 5655:Part 6:1985 and BS 5656:1983
Withdrawal
BS 2655-4:1969 Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for escalators and passenger conveyors
MHE/4 Obsolescent (2012); Replaced by BS 5656:1983 due to existing approvals. Please see full details given in AMD 4421
Withdrawal
BS 2655-5:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for paternosters
MHE/4 Obsolescent (2012) Withdrawal
BS 2655-6:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- Building construction requirements
MHE/4 Obsolescent (2012); Partially replaced by Parts 1, 2, 3 and 14 of BS 5655
Withdrawal
BS 2655-7:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- Testing and inspection
MHE/4 Obsolescent (2012); Partially replaced by BS 5655-1:1979 and BS 5655-10:1986
Withdrawal
BS identifier Title Committee Status Final Review Outcome
BS 2655-8:1971 Specification for lifts, escalators, passenger conveyors and paternosters -- Modernization or reconstruction of lifts, escalators and paternosters
MHE/4 Obsolescent (2012); Partially replaced by Parts 1, 11 and 12 of BS 5655
Withdrawal
BS 2655-9:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- Definitions
MHE/4 Obsolescent (2012) Withdrawal
BS 2657:1974 Specification for fluoroboric acid and metal fluoroborates for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 2742:2009 Use of the Ringelmann and miniature smoke charts
EH/2/1 Current Confirmation
BS 2782-11:Method 1108A:1989
Methods of testing plastics. Thermoplastics pipes, fittings and valves -- True impact rate (TIR) boundaries of pipes
PRI/88 Confirmed (2009) Reconfirmation
BS 2782-11:Method 1109A:1989
Methods of testing plastics. Thermoplastics pipes, fittings and valves -- Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
PRI/88 Confirmed (2009) Reconfirmation
BS 2782-4:Method 434B:1977
Methods of testing plastics. Chemical properties -- Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the chloroform extract
PRI/21 Obsolescent (2012) Withdrawal
BS 2782-5:Method 540C:1988
Methods of testing plastics. Optical and colour properties, weathering. -- Determination of ultraviolet radiation intensity using polysulphone film
PRI/21 Obsolescent (2012) Withdrawal
BS 2790:1992 Specification for design and manufacture of shell boilers of welded construction
PVE/2 BS 2790:1992 remains a current standard and will be withdrawn upon publication of all parts of BS EN 12953
Confirmation
BS 2858:1957 Specification for steel plates for use in the manufacture of galvanizing pots
ISE/105 Obsolescent (2011) Withdrawal
BS 2868:1968 Specification for cadmium anodes and cadmium oxide for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 2972:1989 Methods of test for inorganic thermal insulating materials
B/540 Partially replaced by BS EN 13467 to BS EN 13472:2001
Withdrawal
BS 2B 100:2009 Procedure for inspection, testing and acceptance of wrought copper alloys
ACE/61 Current Confirmation
BS 2B 23:2009 Specification for copper-aluminium-nickel-iron alloy rods, bars, sections, forging stock and forgings
ACE/61/-/16 Current Confirmation
BS 2B 24:2009 Specification for copper-tin-phosphorous alloy rods and sections
ACE/61/-/16 Current Confirmation
BS 2G 111:1955 Specification for rate of climb indicators for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 114:1953 Specification for direct current ratiometer indicators for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 115:1956 Specification for sensitive altimeters for aircraft ACE/1 Confirmed (2009) Reconfirmation
BS 2G 117:1975 Specification for pressure-driven airspeed indicators
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 124-1:1966
Specification for a.c. generators for aircraft -- Constant frequency
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 124-2:1966
Specification for a.c. generators for aircraft -- Variable frequency
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 134:1970 Specification for d.c. generators ACE/1 Confirmed (2009) Reconfirmation
BS 2G 135:1967 Specification for electrically-heated pitot and pitotstatic pressure heads
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 143:1965 Specification for a.c. and d.c. rotary and linear actuators for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 146:1966 Specification for d.c. motors for aircraft ACE/1 Confirmed (2009) Reconfirmation
BS 2G 147-1:1966
Specification for a.c. motors for aircraft -- Three-phase constant frequency squirrel-cage induction motors
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 147-2:1966
Specification for a.c. motors for aircraft -- Three-phase variable frequency squirrel-cage induction motors
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 182:1975 Specification for pressure-driven machmeters for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 199:1984 Schedule for tables relating to altitudes, airspeed and Mach numbers for use in aeronautical instrument design and calibration
ACE/1 Confirmed (2009) Reconfirmation
BS 2G 239:1992 Specification for primary active lithium batteries for use in aircraft
ACE/6 Confirmed (2009) Reconfirmation
BS 2HC 203:1989
Specification for nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 13.0, Al 6.0, Mo 4.5, Nb 2.3)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 2HC 204:1989
Specification for nickel-cobalt-chromium-aluminium-titanium-molybdenum alloy castings (Nickel base Co 15.0, Cr 10.0, Al 5.5, Ti 4.8, Mo 3.0)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 207:1989
Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 208:1989
Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantalum alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 209:1989
Specification for low carbon, precipitation hardening nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 11.5, Al 6.0, Mo 4.0, Nb 2.0)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 210:1989
Specification for nickel-tungsten-aluminium-chromium-molybdenum alloy castings (Nickel base W 10.5, Al 6.0, Cr 6.0, Mo 2.0)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HC 211:1989
Specification for nickel-chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Nickel base Cr 15.5, Co 10.0, Mo 8,3, Al 4.2, Ti 3.6)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS 2HR 203:2009
Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4)
ACE/61/-/48 Current Confirmation
BS 2HR 204:2009
Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
ACE/61/-/48 Current Confirmation
BS 2HR 205:2009
Specification for nickel-copper alloy sheet and strip: annealed (nickel base, Cu 31)
ACE/61/-/48 Current Confirmation
BS 2HR 206:2009
Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
ACE/61/-/48 Current Confirmation
BS 2HR 207:2009
Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
ACE/61/-/48 Current Confirmation
BS 2HR 208:2009
Specification for nickel-chromium-iron alloy plate, sheet and strip: annealed (nickel base, Cr 15.5, Fe 8)
ACE/61/-/48 Current Confirmation
BS 2L 128:1970 Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated) (Zn 4.5, rare earth metals 1.2, Zr 0.7)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS 2L 95:1971 Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
ACE/61/-/24 Replaced by BS EN 2126:1992 Withdrawal
BS 2L 99:1972 Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS 2PL 1:1966 Specification for phenolic mouldings for aeronautical purposes
ACE/65 Obsolescent (2012) Withdrawal
BS 2S 129:1976 Specification for 18/9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 130:1976 Specification for 18/9 chromium-nickel corrosion-resisting steel (niobium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 131:1977 Specification for high thermal expansion steel billets, bars, forgings and parts (620 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 135:1977 Specification for 1% carbon-chromium steel billets, bars, forgings and parts (limiting ruling section 25 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 142:1977 Specification for 1% chromium-molybdenum steel billets, bars, forgings and parts (900-1100 MPa: limiting ruling section 40 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 143:1976 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (930-1080 MPa)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 2S 146:1976 Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 147:1976 Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 149:1976 Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 203:2004 Carbon steel wire rod, wire and springs. High duty unground wire. Hardened and tempered. Specification
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 204:2004 Chromium-vanadium steel wire rod, wire and springs. High duty ground wire. Hardened and tempered. Specification
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 205:2004 Austenitic chromium-nickel steel wire rod, wire and springs. Specification
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 2S 515:1969 Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding)
ACE/61/-/15 Confirmed (2007) Revision in progress
BS 2SP 105:1955
Specification for swaged cable-end assemblies (Unified threads) for preformed steel wire rope (W.9) for aircraft
ACE/12 Obsolescent (2012) Reconfirmation
BS 2SP 106:1955
Specification for swaged cable-end assemblies (Unified threads) for preformed non-corrodible steel wire rope (W.11) for aircraft
ACE/12 Confirmed (2006) Reconfirmation
BS 2TA 38:2009 Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 39:2009 Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 40:2009 Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 41:2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 42:2009 Specification for forgings of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 45:2009 Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 46:2009 Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 47:2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section 100 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 49:2009 Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 50:2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 52:2009 Specification for sheet and strip of titanium- copper alloy (tensile strength 690-920 MPa)
ACE/61/-/49 Current Confirmation
BS 2TA 56:2009 Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
ACE/61/-/49 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 2TA 57:2009 Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 58:2009 Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
ACE/61/-/49 Current Confirmation
BS 2TA 59:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)
ACE/61/-/49 Current Confirmation
BS 2V 35:1966 Specification for plywood for aeronautical purposes
ACE/65 Obsolescent (2012) Withdrawal
BS 2V 37:1968 Specification for Sitka spruce as finished timber ACE/65 Obsolescent (2012) Withdrawal
BS 2X 32:1998 Specification for pre-treatment etch primer for aerospace purposes
ACE/65/-/3 Confirmed (2009) Reconfirmation
BS 2X 33:1998 Specification for two component epoxy primer for aerospace purposes
ACE/65/-/3 Confirmed (2009) Reconfirmation
BS 2X 34:1998 Specification for two component polyurethane finish for aerospace purposes
ACE/65/-/3 Confirmed (2009) Reconfirmation
BS 3062:1985 Specification for ophthalmic lens materials CH/172 Obsolescent (2012) Withdrawal
BS 3073:1977 Specification for nickel and nickel alloys: strip I/- Confirmed (2009) Withdrawal
BS 3074:1989 Specification for nickel and nickel alloys: seamless tube
I/- Confirmed (2009) Withdrawal
BS 3137:1972 Methods for determining the bursting strength of paper and board
PAI/11 Current Confirmation
BS 3165:2009 Rubber suction hose and hose assemblies with semi-embedded wire helix for fire-fighting purposes. Requirements and test methods
FSH/17/8 Current Confirmation
BS 3177:1959 Method for determining the permeability to water vapour of flexible sheet materials used for packaging
B/546 Confirmed (2009) Withdrawal
BS 3214:1974 Specification for locking connectors for battery operated vehicles (320 ampere rating)
PEL/69 Confirmed (2009) Reconfirmation
BS 328-1:1993 Drills and reamers -- Specification for twist drills MTE/18 Confirmed (2009) Reconfirmation
BS 328-2:1972 Drills and reamers -- Combined drills and countersinks (centre drills)
MTE/18 Confirmed (2009) Reconfirmation
BS 328-3:1983 Drills and reamers -- Specification for the dimensions of core drills
MTE/18 Confirmed (2009) Reconfirmation
BS 328-5:1983 Drills and reamers -- Specification for the dimensions of countersinks and counterbores
MTE/18 Confirmed (2009) Reconfirmation
BS 3288-2:2009 Insulator and conductor fittings for overhead power lines -- Specification for a range of insulator fittings
PEL/11 Current Confirmation
BS 3347:1961 Specification for capacitors for railway signalling track circuits
GEL/9 Obsolescent (2012) Withdrawal
BS 341-1:1991 Transportable gas container valves -- Specification for industrial valves for working pressures up to and including 300 bar
PVE/3/1 Partially replaced by BS 341-3:2002, BS EN 849:1997, BS EN 14189:2003, BS EN ISO 13340:2001,BS EN ISO 14246 and BS 341-4:2004
Confirmation
BS 341-2:1963 Transportable gas container valves -- Valves with taper stems for use with breathing apparatus
PVE/3/1 Confirmed (2009); Partially replaced by BS 341-1:1991, BS EN 849:1997 and BS EN ISO 12209 Parts 1-3
Confirmation
BS 3412:1992 Methods of specifying general purpose polyethylene materials for moulding and extrusion
PRI/82 Confirmed (2009) Reconfirmation
BS 341-4:2004 Transportable gas container valves -- Pressure relief devices
PVE/3/1 Confirmed (2009) Reconfirmation
BS 3445-1:1992 Agricultural water troughs and water fittings -- Specification for water trough bodies, service boxes and water supply system
B/549 Confirmed (2009) Reconfirmation
BS 3445-2:1992 Agricultural water troughs and water fittings -- Code of practice for installation and operation
B/549 Confirmed (2009) Reconfirmation
BS 3488:1987 Specification for technical anhydrous lanolin AW/307 Confirmed (2009) Reconfirmation
BS 3506:1969 Specification for unplasticized PVC pipe for industrial uses
PRI/88 Confirmed (2009) Reconfirmation
BS 3597:1984 Specification for electroplated coatings of 65/35 tin/nickel alloy
STI/33 Confirmed (2009) Reconfirmation
BS 3655:1981+A1:2009
Recommendations for informative labelling of textile floor coverings
PRI/3 Current Confirmation
BS 3730-2:1982 Assessment of departures from roundness. -- Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration)
TDW/4 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 3730-3:1982 Assessment of departures from roundness. -- Methods for determining departures from roundness using two- and three-point measurement
TDW/4 Current Confirmation
BS 3762-3.9:1986
Analysis of formulated detergents -- Method for determination of soap content
CII/34 Confirmed (2009) Reconfirmation
BS 3777:1964 Specification for screw thread measuring cylinders
TDW/4 Replaced by BS 5590:1978 Withdrawal
BS 3783:1964 Specification for X-ray lead-rubber protective aprons for personal use
CH/62/2 Obsolescent (2012) Withdrawal
BS 3813-1:1964 Specification for incinerators for waste from trade and residential premises -- Capacities between 50 lb/h and 1000 lb/h
B/508/1 Obsolescent (2011) Withdrawal
BS 3818:1964 Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars
RAE/1 Current Confirmation
BS 3837-1:2004 Expanded polystyrene boards -- Boards and blocks manufactured from expandable beads. Requirements and test methods
PRI/72 Confirmed (2009) Withdrawal
BS 3858:1992 Specification for binding and identification sleeves for use on electric cables and wires
GEL/15 Confirmed (2009) Reconfirmation
BS 3880-3:1971 Specification for paper tape for data processing. -- Representation of codes on paper tape
ICT/-/1 Obsolescent (2011) Withdrawal
BS 3900-B3:1983
Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films -- Determination of 'soluble' lead in the solid matter in liquid paints: method for use in conjunction with The Control of Lead at Work Regulations, 1980 (S.I. 1980 No. 1248)
STI/10 Obsolescent (2012) Withdrawal
BS 3919:1987 Specification for technical tallow and animal grease
AW/307 Confirmed (2009) Reconfirmation
BS 3928:1969 Method for sodium flame test for air filters (other than for air supply to I.C. engines and compressors)
MCE/21 Confirmed (2009) Reconfirmation
BS 3953:1990 Specification for synthetic resin bonded woven glass fabric laminated sheet
GEL/15/6 Partially replaced by BS EN 60893-2:1995, BS EN 60893-3-3:1995, BS EN 60893-3-6:1995 and BS EN 60893-3-7:1995
Withdrawal
BS 3970-1:1990 Sterilizing and disinfecting equipment for medical products -- Specification for general requirements
LBI/35 Obsolescent (2012); Partially replaced by BS EN 285:1997, BS EN 1422:1997+A1:2009 and BS EN 61010-2-043:1998
Reconfirmation
BS 3B 25:2009 Specification for copper-nickel-silicon alloy rods, bars, sections, forging stock and forgings (heat treated)
ACE/61/-/16 Current Confirmation
BS 3B 26:2009 Specification for copper-nickel-silicon alloy rods, bars and sections (solution treated, cold worked and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 27:2009 Specification for copper-zinc-aluminium-nickel-silicon alloy tube
ACE/61/-/16 Current Revision in progress
BS 3B 28:2009 Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 29:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: quarter hard and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 30:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: half hard and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 31:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: full hard and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 32:2009 Specification for copper-beryllium alloy rods, bars and sections (solution treated and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3B 33:2009 Specification for copper-beryllium alloy wire(solution treated and precipitation treated)
ACE/61/-/16 Current Confirmation
BS 3F 129:2003 Woven polyester narrow fabrics for aerospace purposes
ACE/65 Confirmed (2009) Reconfirmation
BS 3G 101:1987 Specification for general requirements for mechanical and electromechanical aircraft indicators
ACE/1 Confirmed (2009) Reconfirmation
BS 3G 148:1981 Specification for general purpose platinum temperature sensors for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS 3G 231:1997 Specification for conductors for general-purpose aircraft electrical cables and aerospace applications
ACE/6 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 3HR 201:2009
Specification for nickel-chromium- titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
ACE/61/-/48 Current Confirmation
BS 3HR 202:2009
Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
ACE/61/-/48 Current Confirmation
BS 3J 12:1991 Specification for pressure-sensitive adhesive identification tape
ACE/1 Confirmed (2009) Reconfirmation
BS 3L 122:1970 Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS 3S 102:1969 Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS 3S 132:1976 Specification. 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 3S 144:1995 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS 3S 145:1996 Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS 3SP 3:1943 Specification for aircraft material. Fork joints (low tensile type) (for sizes No. 4 B.A. to $9H inch B.S.F. inclusive)
ACE/12 Obsolescent (2012) Reconfirmation
BS 3TA 1:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 10:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 100:2009
Procedure for inspection, testing and acceptance of wrought titanium and titanium alloys
ACE/61 Current Confirmation
BS 3TA 11:2009 Specification for bar and section for machining of titanium-aluminium -vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
ACE/61/-/49 Partially replaced by BS EN 3355:2012
Withdrawal
BS 3TA 2:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 21:2009 Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 28:2009 Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm)
ACE/61/-/49 Current Confirmation
BS 3TA 6:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 MPa)
ACE/61/-/49 Current Confirmation
BS 3TA 7:2009 Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 MPa)
ACE/61/-/49 Current Confirmation
BS 3V 4:1929 Specification for aircraft material. Ash ACE/65 Obsolescent (2012) Withdrawal
BS 4001-2:1967 Care and maintenance of underwater breathing apparatus -- Standard diving equipment
PH/4/7 Obsolescent (2011) Withdrawal
BS 4008:2006 Specification for cattle grids B/201 Current Confirmation
BS 4031:1966 Specification for X-ray protective lead glasses CH/62/2 Obsolescent (2012) Withdrawal
BS 4043:1989 Recommendations for transplanting root-balled trees
B/213 Confirmed (2007) Withdrawal
BS 4064:1966 Specification for plain setting rings for use with internal diameter measuring machines. Metric units
TDW/4 Current Confirmation
BS 4065:1966 Specification for plain setting rings for use with internal diameter measuring machines. Inch units
TDW/4 Current Confirmation
BS 4098:1975 Method for the determination of thickness, compression and recovery characteristics of textile floor coverings
PRI/3 Confirmed (2009) Reconfirmation
BS 4168-1:1981 Hexagon socket screws and wrench keys: metric series -- Specification for hexagon socket head cap screws
FME/9 Replaced by BS EN ISO 4762:1998
Withdrawal
BS 4213:2004 Cisterns for domestic use. Cold water storage and combined feed and expansion (thermoplastic) cisterns up to 500 l. Specification
PRI/62 Confirmed (2009) Reconfirmation
BS 4223:1989 Methods for determination of constructional details of textile floor coverings with yarn pile
PRI/3 Confirmed (2009) Withdrawal
BS 4261:1999 Wood preservation. Vocabulary B/515 Obsolescent (2011) Withdrawal
BS identifier Title Committee Status Final Review Outcome
BS 4272-1:1968 Anaesthetic and analgesic machines -- Anaesthetic machines of the on-demand type supplied with nitrous oxide and oxygen from separate containers
CH/121/1 Current Confirmation
BS 4285-3.11:1985
Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms -- Detection and enumeration of faecal streptococci
AW/9 Confirmed (2005) Reconfirmation
BS 4285-5.2:1989
Microbiological examination for dairy purposes. Ancillary methods -- Methylene blue reduction test for cream and ice cream
AW/9 Obsolescent (2011) Withdrawal
BS 4289-5:1989 Method for the analysis of oilseeds. -- Determination of acidity of fat
AW/307 Confirmed (2009) Reconfirmation
BS 4290:1989 Method for specifying electroplated coatings of silver and silver alloys for decorative and protective purposes
STI/33 Confirmed (2009) Reconfirmation
BS 4292-2:1989 Method for specifying electroplated coatings of gold and gold alloys -- Gold and gold alloys for decorative and protective purposes
STI/33 Confirmed (2009) Reconfirmation
BS 4311-1:2007 Gauge blocks manufactured to imperial specification -- Specification and validation
TDW/4 Current Confirmation
BS 4311-2:2009 Gauge blocks manufactured to imperial specification -- Accessories
TDW/4 Current Confirmation
BS 4325-1:1978 Methods for analysis of oilseed residues -- Determination of moisture and volatile matter content
AW/307 Confirmed (2009) Reconfirmation
BS 4325-2:1978 Methods for analysis of oilseed residues -- Determination of total ash
AW/307 Confirmed (2009) Reconfirmation
BS 4325-5:1978 Methods for analysis of oilseed residues -- Determination of diethyl ether extract
AW/307 Confirmed (2009) Reconfirmation
BS 4370-2:1993 Methods of test for rigid cellular materials -- Methods 7 to 9
PRI/24 Partially replaced by BS EN ISO 4590:1995 and BS ISO 1922:2001. Was withdrawn but has been reinstated
Withdrawal
BS 4376:1982 Specification for electrically operated blood storage refrigerators
RHE/19 Partially replaced by BS 4376-1:1991
Withdrawal
BS 4395-1:1969 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering -- General grade
FME/9 Replaced by BS EN 14399-1:2005, BS EN 14399-2:2005, BS EN 14399-3:2005, BS EN 14399-4:2005, BS EN 14399-5:2005, BS EN 14399-6:2005, BS EN 14399-7:2007, BS EN 14399-8:2007 and BS EN 14399-10:2009
Withdrawal
BS 4395-2:1969 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering -- Higher grade bolts and nuts and general grade washers
FME/9 Replaced by BS EN 14399-1:2005, BS EN 14399-2:2005, BS EN 14399-3:2005, BS EN 14399-4:2005, BS EN 14399-5:2005, BS EN 14399-6:2005, BS EN 14399-7:2007, BS EN 14399-8:2007 and BS EN 14399-10:2009
Withdrawal
BS 4407:1988 Methods for quantitative analysis of fibre mixtures
TCI/80 Replaced by Parts of BS EN ISO 1833
Withdrawal
BS 4427-2:1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use -- Measurement of pH value of sodium tripolyphosphate
CII/34 Current Confirmation
BS 4449:2005+A2:2009
Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification
ISE/104 Current Confirmation
BS 4465:1989 Specification for design and construction of electric hoists for both passengers and materials
MHE/6 Obsolescent (2011) Withdrawal
BS 4480-2:1974 Specification for plain bearings: metric series. -- Solid plastics bushes
MCE/12 Confirmed (2009) Reconfirmation
BS 4481-2:1983 Bonded abrasive products -- Specification for dimensions of grinding wheels and segments
MTE/13 Current Confirmation
BS 4493:1969 Specification for copper salts for electroplating STI/33 Confirmed (2009) Reconfirmation
BS 4500:2009 Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
TDW/4/10 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 4550-3.4:1978
Methods of testing cement. Physical tests -- Strength tests
B/516/12 Replaced by BS EN 196-1:1995 as it is quoted in other standards. Partially replaced by BS 1881-131:1998
Withdrawal
BS 4550-3.8:1978
Methods of testing cement. Physical tests -- Test for heat of hydration
B/516/12 Confirmed (2009) Reconfirmation
BS 4552-1:1979 Fuel filters, strainers and sedimentors for compression-ignition engines. -- Methods of test
MCE/21 Confirmed (2009) Reconfirmation
BS 4570:1985 Specification for fusion welding of steel castings WEE/-/1 Obsolescent (2011) Withdrawal
BS 4660:2000 Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage
PRI/88/1 Confirmed (2007); Partially replaced by BS EN 13598-1:2010
Reconfirmation
BS 4662:2006+A1:2009
Boxes for flush mounting of electrical accessories. Requirements, test methods and dimensions
PEL/23 Current Reconfirmation
BS 4682-2:1988 Methods of test for dimensional stability of textile floor coverings -- Determination of dimensional changes due to changes in ambient humidity
PRI/3 Confirmed (2009) Reconfirmation
BS 4682-3:1981 Methods of test for dimensional stability of textile floor coverings -- Determination of dimensional changes after exposure to heat
PRI/3 Confirmed (2009) Withdrawal
BS 4682-4:1981 Methods of test for dimensional stability of textile floor coverings -- Determination of dimensional changes after immersion in water
PRI/3 Confirmed (2009) Withdrawal
BS 4727-2:Group 02:1983
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering -- Power electronics terminology
GEL/1 Confirmed (2009) Reconfirmation
BS 4727-3:Group 07:1971
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics -- Radiocommunication terminology
GEL/1 Confirmed (2009) Reconfirmation
BS 4737-3.0:1988
Intruder alarm systems. Specifications for components -- General requirements
GW/1 Current Confirmation
BS 4783-1:1988 Storage, transportation and maintenance of media for use in data processing and information storage. -- Recommendations for disk packs, storage modules and disk cartridges
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4783-2:1988 Storage, transportation and maintenance of media for use in data processing and information storage -- Recommendations for magnetic tape on open spools
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4783-3:1988 Storage, transportation and maintenance of media for use in data processing and information storage -- Recommendations for flexible disk cartridges
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4783-4:1988 Storage, transportation and maintenance of media for use in data processing and information storage. -- Recommendations for magnetic tape cartridges and cassettes
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4790:1987 Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)
PRI/3 Confirmed (2009) Reconfirmation
BS 4805:1989 Method for determination of the dimensions of rectangular textile floor coverings
PRI/3 Confirmed (2009) Withdrawal
BS 4808-1:1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. -- General requirements and tests
EPL/46 Obsolescent (2011) Withdrawal
BS 4808-2:1972 Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication. -- Equipment wires with solid or stranded conductors, unscreened, single
EPL/46 Obsolescent (2011) Withdrawal
BS 4822:1994 Specification for keyboard allocation of graphic characters for data processing
ICT/-/1 Obsolescent (2011) Withdrawal
BS 4825-2:1991+A2:2009
Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for bends and tees
ISE/110 Confirmed (2007) Reconfirmation
BS 4825-3:1991+A2:2009
Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for clamp type couplings
ISE/110 Current Reconfirmation
BS 4825-4:1991+A1:2009
Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for threaded (IDF type) coupling
ISE/110 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 4825-5:1991+A1:2009
Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for recessed ring joint type couplings
ISE/110 Current Confirmation
BS 4841-1:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications -- Specification for laminated insulation boards with auto-adhesively or separately bonded facings
PRI/72/4 Current Confirmation
BS 4841-3:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications -- Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes
PRI/72/4 Current Confirmation
BS 4841-4:2006 Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications -- Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes
PRI/72/4 Current Confirmation
BS 4841-6:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications -- Specification for laminated boards with auto-adhesively or separately bonded facings for use as thermal insulation for floors
PRI/72/4 Current Confirmation
BS 4873:2009 Aluminium alloy windows and doorsets. Specification
B/538/1 Current Confirmation
BS 4962:1989 Specification for plastics pipes and fittings for use as subsoil field drains
PRI/88 Confirmed (2009) Reconfirmation
BS 4991:1974 Specification for propylene copolymer pressure pipe
PRI/88 Confirmed (2009) Reconfirmation
BS 4996:1973 Specification for line traps for power line carrier systems
PEL/57 Confirmed (2009) Reconfirmation
BS 4A 100:2003 Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
ACE/12 Confirmed (2009) Reconfirmation
BS 4A 4:1966 Test pieces and test methods for metallic materials for aircraft. Metric units
ACE/61/-/6 Confirmed (2009); Partially replaced by BS 18:1987
Withdrawal
BS 4S 106:1976 Specification. 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (suitable for nitriding)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 5045-6:1987 Transportable gas containers -- Specification for seamless containers of less than 0.5 litre water capacity
PVE/3/3 Confirmed (2009); Partially replaced by BS EN 13293:2002
Confirmation
BS 5051-1:1988 Bullet-resistant glazing -- Specification for glazing for interior use
B/520/3 Obsolescent (2012); Replaced by BS EN 1063:2000
Withdrawal
BS 5070-1:1988 Engineering diagram drawing practice -- Recommendations for general principles
TDW/4 Partially replaced by BS EN 61082-1:1993 which has since been superseded
Confirmation
BS 5070-3:1988 Engineering diagram drawing practice -- Recommendations for mechanical/fluid flow diagrams
TDW/4 Current Confirmation
BS 5070-4:1990 Engineering diagram drawing practice -- Recommendations for logic diagrams
TDW/4 Current Confirmation
BS 5079:1981 Specification for information interchange on 3.81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1600 ftpi)
ICT/-/1 Obsolescent (2011) Withdrawal
BS 5099:2004 Electric cables. Voltage levels for spark testing GEL/20/17 Confirmed (2009) Reconfirmation
BS 5136:1981 Specification for toothpastes CH/106/7 Partially replaced by BS EN ISO 11609:1998
Withdrawal
BS 5154:1991 Specification for copper alloy globe, globe stop and check, check and gate valves
PSE/18/2 Partially replaced by BS EN 12288:2003
Confirmation
BS 5163-1:2004 Valves for waterworks purposes -- Predominantly key-operated cast iron gate valves. Code of practice
PSE/18/3 Confirmed (2009) Reconfirmation
BS 5163-2:2004 Valves for waterworks purposes -- Stem caps for use on isolating valves and associated water control apparatus. Specification
PSE/18/2 Confirmed (2009) Reconfirmation
BS 519:1950 Specification for tractive armature direct current neutral-polar line relays for railway signalling
GEL/9 Obsolescent (2012) Withdrawal
BS 5229:1975 Method for determination of tuft withdrawal force of carpets
PRI/3 Confirmed (2009) Withdrawal
BS 5234-1:1992 Partitions (including matching linings) -- Code of practice for design and installation
B/544 Confirmed (2007) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 5234-2:1992 Partitions (including matching linings) -- Specification for performance requirements for strength and robustness including methods of test
B/544 Confirmed (2007) Reconfirmation
BS 5241-1:1994 Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site -- Specification for sprayed foam thermal insulation applied externally
PRI/72 Confirmed (2009) Reconfirmation
BS 5255:1989 Specification for thermoplastics waste pipe and fittings
PRI/88 Confirmed (2009); Partially replaced by BS EN 1329-1:2000, BS EN 1455-1:2000, BS EN 1519-1:2000, BS EN 1565-1:2000 and BS EN 1566-1:2000
Withdrawal
BS 5258-1:1986 Safety of domestic gas appliances -- Specification for central heating boilers and circulators
GSE/29 Obsolescent (2011) Withdrawal
BS 5258-15:1990
Safety of domestic gas appliances -- Specification for combination boilers
GSE/29 Obsolescent (2011) Withdrawal
BS 5287:1988 Specification for assessment and labelling of textile floor coverings tested to BS 4790
PRI/3 Confirmed (2009) Reconfirmation
BS 5306-3:2009 Fire extinguishing installations and equipment on premises -- Commissioning and maintenance of portable fire extinguishers. Code of practice
FSH/2 Current Revision in progress
BS 5307:1976 Specification. Basic ball-lock punches MTE/12 Confirmed (2009) Reconfirmation
BS 5315:1991 Hose clamps (worm drive type) for general purpose use (metric series)
PSE/6 Confirmed (2009) Reconfirmation
BS 5325:2001 Installation of textile floor coverings. Code of practice
PRI/3 Confirmed (2009)
BS 5341-5:1976 Piston rings up to 200 mm diameter for reciprocating internal combustion engines -- Ring grooves
MCE/14 Confirmed (2009) Reconfirmation
BS 5343-2:1991 Gas detector tubes -- Specification for long term gas detector tubes
EH/2/2 Obsolescent (2011) Withdrawal
BS 5350-B9:1984
Methods of test for adhesives. Adhesives -- Determination of resistance to sagging (flow after application)
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-C5:2002
Methods of test for adhesives -- Determination of bond strength in longitudinal shear for rigid adherends
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-H1:1981
Methods of test for adhesives. -- Determination of heat stability of hot melt adhesives in the application equipment
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-H2:1982
Methods of test for adhesives. Physical tests on hot-melt adhesives -- Determination of low temperature flexibility or cold crack temperature
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-H3:1984
Methods of test for adhesives. Physical tests on hot-melt adhesives -- Determination of heat resistance of hot-melt adhesives
PRI/52 Confirmed (2009) Reconfirmation
BS 5350-H4:1984
Methods of test for adhesives. Physical tests on hot-melt adhesives -- Determination of maximum open time of hot-melt adhesives (oven method)
PRI/52 Confirmed (2009) Reconfirmation
BS 5385-1:2009 Wall and floor tiling -- Design and installation of ceramic, natural stone and mosaic wall tiling in normal internal conditions. Code of practice
B/539 Current Confirmation
BS 5385-4:2009 Wall and floor tiling -- Design and installation of ceramic and mosaic tiling in special conditions. Code of practice
B/539 Current Revision in progress
BS 5385-5:2009 Wall and floor tiling -- Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice
B/539 Current Confirmation
BS 5395-3:1985 Stairs, ladders and walkways -- Code of practice for the design of industrial type stairs, permanent ladders and walkways
B/208 Partially replaced by Parts 1 to 4 of BS EN ISO 14122 and BS 4592-0:2006+A1:2012
Withdrawal
BS 542:1973 Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries
MRE/3 Obsolescent (2011) Withdrawal
BS 5422:2009 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40$0DC to +700$0DC
B/540/7 Current Confirmation
BS 5440-2:2009 Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases) -- Specification for the installation and maintenance of ventilation provision for gas appliances
GSE/30/-/15 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 5446-3:2005 Fire detection and fire alarm devices for dwellings -- Specification for smoke alarm kits for deaf and hard of hearing people
FSH/12/2 Obsolescent (2012) Revision in progress
BS 5467:1997+A3:2008
Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
GEL/20/17 Confirmed (2009) Reconfirmation
BS 5493:1977 Code of practice for protective coating of iron and steel structures against corrosion
B/209 Partially replaced by Parts 1 to 8 of BS EN ISO 12944 and BS EN ISO 14713:1999
Withdrawal
BS 5502-0:1992 Buildings and structures for agriculture -- Introduction
B/549 Confirmed (2009) Reconfirmation
BS 5502-20:1990
Buildings and structures for agriculture -- Code of practice for general design considerations
B/549 Confirmed (2009) Reconfirmation
BS 5502-21:1990
Buildings and structures for agriculture -- Code of practice for selection and use of construction materials
B/549 Confirmed (2009) Reconfirmation
BS 5502-23:2004
Buildings and structures for agriculture -- Fire precautions. Code of practice
B/549 Confirmed (2009) Reconfirmation
BS 5502-25:1991
Buildings and structures for agriculture -- Code of practice for design and installation of services and facilities
B/549 Confirmed (2009) Reconfirmation
BS 5502-30:1992
Buildings and structures for agriculture -- Code of practice for control of infestation
B/549 Confirmed (2009) Reconfirmation
BS 5502-32:1990
Buildings and structures for agriculture -- Guide to noise attenuation
B/549 Confirmed (2009) Reconfirmation
BS 5502-33:1991
Buildings and structures for agriculture -- Guide to the control of odour pollution
B/549 Confirmed (2009) Reconfirmation
BS 5502-41:1990
Buildings and structures for agriculture -- Code of practice for design and construction of sheep buildings and pens
B/549 Confirmed (2009) Reconfirmation
BS 5502-42:1990
Buildings and structures for agriculture -- Code of practice for design and construction of pig buildings
B/549 Confirmed (2009) Reconfirmation
BS 5502-43:1990
Buildings and structures for agriculture -- Code of practice for design and construction of poultry buildings
B/549 Confirmed (2009) Reconfirmation
BS 5502-49:1990
Buildings and structures for agriculture -- Code of practice for design and construction of milking premises
B/549 Confirmed (2009) Reconfirmation
BS 5502-51:1991
Buildings and structures for agriculture -- Code of practice for design and construction of slatted, perforated and mesh floors for livestock
B/549 Confirmed (2009) Reconfirmation
BS 5502-52:1991
Buildings and structures for agriculture -- Code of practice for design of alarm systems, emergency ventilation and smoke ventilation for livestock housing
B/549 Confirmed (2009) Reconfirmation
BS 5502-60:1992
Buildings and structures for agriculture -- Code of practice for design and construction of buildings for mushrooms
B/549 Confirmed (2009) Reconfirmation
BS 5502-65:1992
Buildings and structures for agriculture -- Code of practice for design and construction of crop processing buildings
B/549 Confirmed (2009) Reconfirmation
BS 5502-66:1992
Buildings and structures for agriculture -- Code of practice for design and construction of chitting houses
B/549 Confirmed (2009) Reconfirmation
BS 5502-70:1992
Buildings and structures for agriculture -- Code of practice for design and construction of ventilated on floor stores for combinable crops
B/549 Confirmed (2009) Reconfirmation
BS 5502-71:1992
Buildings and structures for agriculture -- Code of practice for design and construction of ventilated stores for potatoes and onions
B/549 Confirmed (2009) Reconfirmation
BS 5502-72:1992
Buildings and structures for agriculture -- Code of practice for design and construction of controlled environment stores for vegetables, fruit and flowers
B/549 Confirmed (2009) Reconfirmation
BS 5502-74:1991
Buildings and structures for agriculture -- Code of practice for design and construction of bins and silos for combinable crops
B/549 Confirmed (2009) Reconfirmation
BS 5502-75:1993
Buildings and structures for agriculture -- Code of practice for the design and construction of forage stores
B/549 Confirmed (2009) Reconfirmation
BS 5502-80:1990
Buildings and structures for agriculture -- Code of practice for design and construction of workshops, maintenance and inspection facilities
B/549 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 5502-81:1989
Buildings and structures for agriculture -- Code of practice for design and construction of chemical stores
B/549 Confirmed (2009) Reconfirmation
BS 5502-82:1997
Buildings and structures for agriculture -- Code of practice for design of amenity buildings
B/549 Confirmed (2009) Reconfirmation
BS 5516-1:2004 Patent glazing and sloping glazing for buildings -- Code of practice for design and installation of sloping and vertical patent glazing
B/520/5 Current Confirmation
BS 5516-2:2004 Patent glazing and sloping glazing for buildings -- Code of practice for sloping glazing
B/520/5 Current Confirmation
BS 5540-3:1978 Specification for evaluating particulate contamination of hydraulic fluids. -- Methods of bottling fluid samples
MCE/18 Confirmed (2009) Reconfirmation
BS 5544:1978 Specification for anti-bandit glazing (glazing resistant to manual attack)
B/520/3 Obsolescent (2012); Replaced by BS EN 356:2000 for the testing and classification of glass and glass/plastics composites but remains available for the testing and classification of plastics glazing sheet materials until a corresponding British Standard is
Withdrawal
BS 5550-1.3.3:1980
Cinematography. 8 mm film. Camera usage -- Specification for claw-to-gate distance in 8 mm Type R spool-loading cinematograph equipment
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-2.12.1:1993
Cinematography. 16 mm film. Miscellaneous. -- Specification for test film for assessing the picture performance of 16 mm motion-picture projectors
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-2.7.2:1982
Cinematography. 16 mm film. Projection. -- Specification for the performance of 16 mm sound-film projectors
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-2.9.3:1980
Cinematography. 16 mm film. Projector spools. -- Specification for 16 mm film spools of 732 m capacity (43 cm size) for specialized equipment
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.1.2:1978
Cinematography. 35 mm film. Raw stock -- Specification for the dimensional features of magnetic coatings on 35 mm perforated film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.10.1:1980
Cinematography. 35 mm film. Sprockets -- Specification for broad tooth sprockets for 35 mm perforated film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.10.2:1980
Cinematography. 35 mm film. Sprockets -- Specification for universal sprockets for 35 mm perforated film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.12.1:1979
Cinematography. 35 mm film. Miscellaneous. -- Specification for metal cans for processed 35 mm motion-picture film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.4.8:1986
Cinematography. 35 mm film. Sound. -- Specification for the lateral positions and width dimensions of two-track negative photographic sound records on 35 mm motion-picture film
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-3.9.1:1980
Cinematography. 35 mm film. Projector spools -- Specification for 35 mm film spools of 610 m capacity (38 cm size) for release prints
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-7.1.1:1980
Cinematography. Production and presentation. Light sources and lighting. -- Specification for exciter lamps
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-7.2.5:1980
Cinematography. Production and presentation. Screens and screen luminance. -- Specification for cinematograph screens
CPW/36 Confirmed (2009) Reconfirmation
BS 5550-7.5.4:1981
Cinematography. Production and presentation. Film and television location lighting. -- Specification for single pole high current plugs and socket connectors
CPW/4 Obsolescent (2011) Withdrawal
BS 558 and 564:1970
Specifications for nickel anodes, anode nickel and nickel salts for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 559:2009 Specification for the design and construction of signs for publicity, decorative and general purposes
CPL/34/11 Current Confirmation
BS 5608:1993 Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment
PRI/72 Confirmed (2009) Reconfirmation
BS 561:1951 Specification for alternating-current line relays double-element 3-position (for railway signalling)
GEL/9 Obsolescent (2012) Withdrawal
BS 5655-13:1995
Lifts and service lifts -- Recommendations for vandal resistant lifts
MHE/4 Obsolescent (2012); Replaced by BS EN 81-71
Withdrawal
BS identifier Title Committee Status Final Review Outcome
BS 5655-7:1983 Lifts and service lifts -- Specification for manual control devices, indicators and additional fittings
MHE/4 Obsolescent (2012); Withdrawal
BS 5655-9:1985 Lifts and service lifts -- Specification for guide rails
MHE/4 Obsolescent (2012); Withdrawal
BS 5658:1979 Specification for gold potassium cyanide for electroplating
STI/33 Confirmed (2009) Reconfirmation
BS 5707:1997 Specification for preparations of wood preservatives in organic solvents
B/515 Confirmed (2009) Reconfirmation
BS 5713:1979 Specification for hermetically sealed flat double glazing units
B/520/2 Obsolescent (2011) Withdrawal
BS 5744:1979 Code of practice for safe use of cranes (overhead/underhung travelling and goliath cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes, container handling cranes and rail-mounted low carriage cranes)
MHE/3/11 Partially replaced by Parts 1 to 3 of BS 7121. When all parts of BS 7121 have been published BS 5744 will be revised to cover manually operated and light cranes only
Withdrawal
BS 5832:1980 Specification for compacted waste containers for lift-off vehicles
B/508/1 Obsolescent (2011) Withdrawal
BS 5834-1:2009 Surface boxes, guards and underground chambers for the purposes of utilities -- Specification for guards and plinths
B/504 Current Confirmation
BS 5838-1:1980 Specification for dry packaged cementitious mixes -- Prepacked concrete mixes
B/517 Confirmed (2009) Reconfirmation
BS 5892-1:1992+A3:2009
Railway rolling stock materials -- Specification for axles for traction and trailing stock
RAE/3 Current Confirmation
BS 5920:1980 Method for determination of dimensions of textile floor covering test specimens
PRI/3 Confirmed (2009) Reconfirmation
BS 5921:1980 Methods for determination of size, squareness and straightness of edge of textile floor covering tiles
PRI/3 Confirmed (2009) Reconfirmation
BS 5931:1980 Code of practice for machine laid in situ edge details for paved areas
B/507 Confirmed (2009) Reconfirmation
BS 5955-8:2001 Plastics pipework (thermoplastics materials) -- Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
PRI/88/2 Current Confirmation
BS 5958-2:1991 Code of practice for control of undesirable static electricity -- Recommendations for particular industrial situations
EXL/31 Replaced by PD CLC/TR 50404:2003
Withdrawal
BS 5F 59:2002 Braided linen (flax) cord for aerospace purposes ACE/65 Confirmed (2009) Reconfirmation
BS 5S 82:1976 Specification. 4% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1320-1520 MPa)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS 5S 99:1994 Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forgings and parts (1230-1420 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS 600:2000 A guide to the application of statistical methods to quality and standardization
SS/3 Current Confirmation
BS 6031:2009 Code of practice for earthworks B/526 Current Confirmation
BS 6101-1:1981 Machine tool ball screws. -- Methods of calculating dynamic and static load and life ratings
MTE/1 Current Reconfirmation
BS 6102-16:1997
Cycles -- Specification for replacement brake blocks
GME/25 Confirmed (2009) Reconfirmation
BS 6117:1981 Specification for glass bottles for light wine PKW/0 Obsolescent (2011) Withdrawal
BS 6137:1982 Specification for electroplated coatings of tin/lead alloys
STI/33 Confirmed (2009) Reconfirmation
BS 6166-3:1988 Lifting slings -- Guide to the selection and safe use of lifting slings for multi-purposes
MHE/11 Obsolescent (2012) Withdrawal
BS 6173:2009 Specification for installation and maintenance of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)
GSE/30 Current Confirmation
BS 6206:1981 Specification for impact performance requirements for flat safety glass and safety plastics for use in buildings
B/520 Partially replaced by BS EN 12600:2002
Withdrawal
BS 622:1967 Specification for potassium and sodium cyanides for electroplating
STI/33 Confirmed (2009) Withdrawal
BS 6221-25:2000
Printed wiring boards -- Guide to the rework and repair of soldered surface mounted printed board assemblies
EPL/501 Current Withdrawal
BS 6222-2:2009 Domestic kitchen equipment -- Fitted kitchen units, peninsular units, island units and breakfast bars. Performance requirements and test methods
FW/0/2 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 6229:2003 Flat roofs with continuously supported coverings. Code of practice
B/546 Current Reconfirmation
BS 6256:1989 Specification for paper for steam sterilization paper bags, pouches and reels for medical use
LBI/35 Obsolescent (2011) Reconfirmation
BS 6262:1982 Code of practice for glazing for buildings B/520/4 Partially replaced by Parts 1-4 and 6-7 of BS 6262. It will be withdrawn on publication of BS 6262-5
Withdrawal
BS 6262-1:2005 Glazing for buildings -- General methodology for the selection of glazing
B/520/4 Current Confirmation
BS 6262-2:2005 Glazing for buildings -- Code of practice for energy, light and sound
B/520/4 Current Confirmation
BS 6262-3:2005 Glazing for buildings -- Code of practice for fire, security and wind loading
B/520/4 Current Confirmation
BS 6262-4:2005 Glazing for buildings -- Code of practice for safety related to human impact
B/520/4 Current Confirmation
BS 6262-6:2005 Glazing for buildings -- Code of practice for special applications
B/520/4 Current Confirmation
BS 6262-7:2005 Glazing for buildings -- Code of practice for the provision of information
B/520/4 Current Confirmation
BS 6332-1:1988 Thermal performance of domestic gas appliances -- Specification for thermal performance of central heating boilers and circulators
GSE/29 Obsolescent (2011) Withdrawal
BS 6349-1:2000 Maritime structures -- Code of practice for general criteria
CB/502 Replaced by BS 6349-1-3:2012 and BS 6349-1-4:2013
Revision in progress
BS 6349-4:1994 Maritime structures -- Code of practice for design of fendering and mooring systems
CB/502 Current Revision in progress
BS 6354:1983 Method for measuring the screen luminance, contrast and reflectance of microform readers
IDT/1 Confirmed (2006) Withdrawal
BS 6359:1983 Specification for dimensions and position of microfiche heading coating (colour stripe)
IDT/1 Confirmed (2006) Reconfirmation
BS 6375-1:2009 Performance of windows and doors -- Classification for weathertightness and guidance on selection and specification
B/538 Current Revision in progress
BS 6391:2009 Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes
FSH/17/8 Current Confirmation
BS 6455:1984 Method for monitoring the levels of residual solvents in flexible packaging materials
CW/47 Confirmed (2009) Reconfirmation
BS 6464:1984 Specification for reinforced plastics pipes, fittings and joints for process plants
PRI/88 Confirmed (2009) Reconfirmation
BS 6465-1:2006+A1:2009
Sanitary installations -- Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances
B/209 Current Confirmation
BS 6466:1984 Code of practice for design and installation of ceramic fibre furnace linings
RPI/1 Confirmed (2009) Reconfirmation
BS 6485:1999 PVC-covered conductors for overhead power lines
GEL/20/16 Obsolescent (2012) Reconfirmation
BS 6501-1:2004 Metal hose assemblies -- Guidance on the construction and use of corrugated hose assemblies
GSE/42 Confirmed (2009) Reconfirmation
BS 6525:1984 Specification for design and construction of reservoirs used in hydraulic fluid power systems
MCE/18 Confirmed (2009) Reconfirmation
BS 6533:1984 Guide to macroscopic examination of steel by etching with strong mineral acids
ISE/102 Confirmed (2009) Reconfirmation
BS 6534:1984 Method for quantitative determination of lead in tin coatings
CW/47 Confirmed (2009) Reconfirmation
BS 6586-1:1993 Rigid polyurethane (PUR) foam produced by the press injection method -- Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies
PRI/72 Confirmed (2009) Reconfirmation
BS 6593:1985+A1:2009
Code of practice for On-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
PRI/67 Confirmed (2009) Reconfirmation
BS 6611:1985 Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
GME/21/6 Confirmed (2009) Reconfirmation
BS 6642:1985 Specification for disposable plastics refuse sacks made from polyethylene
B/508/1 Obsolescent (2011) Withdrawal
BS 6654:1985 Method for determination of the electrical resistivity of textile floor coverings
PRI/3 Confirmed (2009) Withdrawal
BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice
GEL/65 Current Confirmation
BS 6744:2001+A2:2009
Stainless steel bars for the reinforcement of and use in concrete. Requirements and test methods
ISE/104 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 6779-1:1998 Highway parapets for bridges and other structures -- Specification for vehicle containment parapets of metal construction
B/509/1 Partially replaced by BS EN 1317-1:1998
Reconfirmation
BS 6779-2:1991 Highway parapets for bridges and other structures -- Specification for vehicle containment parapets of concrete construction
B/509 Partially replaced by BS EN 1317-1:1998
Reconfirmation
BS 6779-3:1994 Highway parapets for bridges and other structures -- Specification for vehicle containment parapets of combined metal and concrete construction
B/509 Confirmed (2006); Partially replaced by BS EN 1317-1:1998
Reconfirmation
BS 6808-1:1987 Coordinate measuring machines -- Glossary of terms
TDW/4 Current Confirmation
BS 6810-1:1987 Determination of metals in textiles -- Analysis by atomic absorption and colorimetric spectroscopy
TCI/80 Current Confirmation
BS 684-1.7:1976 Methods of analysis of fats and fatty oils. Physical methods. -- Determination of surface-drying time
AW/307 Confirmed (2009) Reconfirmation
BS 684-1.8:1976 Methods of analysis of fats and fatty oils. Physical methods -- Determination of smoke point
AW/307 Confirmed (2009) Reconfirmation
BS 684-1.9:1976 Methods of analysis of fats and fatty oils. Physical methods. -- Determination of water-insoluble solvents
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.12:1984
Methods of analysis of fats and fatty oils. Other methods -- Determination of oxidized fatty acids
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.15:1986
Methods of analysis of fats and fatty oils. Other methods -- Calculation of total saponifiable matter
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.16:1976
Methods of analysis of fats and fatty oils. Other methods. -- Determination of copper. Colorimetric method
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.17:1976
Methods of analysis of fats and fatty oils. Other methods. -- Determination of iron. Colorimetric method
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.20:1977
Methods of analysis of fats and fatty oils. Other methods -- Determination of carotene in vegetable oils
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.27:1987
Methods of analysis of fats and fatty oils. Other methods. -- Determination of bleachability
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.29:1978
Methods of analysis of fats and fatty oils. Other methods. -- Cottonseed oil test (Halphen)
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.4:1976 Methods of analysis of fats and fatty oils. Other methods -- Calculation of total fatty matter
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.48:1998
Methods of analysis of fats and fatty oils. Other methods -- Determination of mineral acidity
AW/307 Confirmed (2009) Reconfirmation
BS 684-2.8:1977 Methods of analysis of fats and fatty oils. Other methods. -- Determination of total neutral oil
AW/307 Confirmed (2009) Reconfirmation
BS 6873:1988 Specification for filament lamps for cycles CPL/34/1 Confirmed (2009) Reconfirmation
BS 6910-2:1989 Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. -- Code of practice for on-site installation
GEL/20/11 Obsolescent (2011) Reconfirmation
BS 6F 37:1990 Specification for 570 g/m$u2 and 640 g/m$u2 cotton canvas fabrics for aerospace purposes
ACE/65 Confirmed (2009) Reconfirmation
BS 6V 3:1943 Specification for aircraft material. High strength plywood for aircraft
ACE/65 Obsolescent (2012) Withdrawal
BS 6W 8:1938 Tie rods (swaged) (No. 4 B.A. to $9H inch B.S.F. inclusive) for aircraft purposes
ACE/12 Obsolescent (2012) Withdrawal
BS 7044-1:1990 Artificial sports surfaces -- Classification and general introduction
PRI/57 Current Confirmation
BS 7044-4:1991 Artificial sports surfaces -- Specification for surfaces for multi-sports use
PRI/57 Partially replaced by BS EN 14877:2006, BS EN 14904:2006, BS EN 15330-1:2007 and BS 15330-2
Withdrawal
BS 7078:1989 Method for determination of the electrical resistance to earth of an installed textile floor covering
PRI/3 Confirmed (2009) Withdrawal
BS 7085:1989 Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock
GME/21/6 Confirmed (2009) Reconfirmation
BS 7121-13:2009
Code of practice for safe use of cranes -- Hydraulic gantry lifting systems
MHE/3/11 Current Confirmation
BS 7122:1989 Specification for welded steel tanks for the road transport of liquefiable gases
AUE/18 Confirmed (2009) Reconfirmation
BS 7134-0:1989 Testing of engineering ceramics -- Introduction and guide to sampling
RPI/1 Confirmed (2009) Reconfirmation
BS 7159:1989 Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems…
PRI/88 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 7164-10:1994
Chemical tests for raw and vulcanized rubber -- Method for preparation and examination of water extract
PRI/23 Obsolescent (2011) Withdrawal
BS 7164-11.1:1994
Chemical tests for raw and vulcanized rubber. Butadiene rubber -- Method for determination of microstructure
PRI/23 Obsolescent (2011) Withdrawal
BS 7164-13:1994
Chemical tests for raw and vulcanized rubber -- Method for determination of total hydrocarbon content
PRI/23 Obsolescent (2011) Withdrawal
BS 7197:1990 Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV
GEL/20/11 Confirmed (2009) Reconfirmation
BS 7225-3.1:1990
Classification of refractories. Ceramic fibre products -- Blankets, mats, felts and paper
RPI/1 Confirmed (2009) Withdrawal
BS 7254-6.2:1990
Orthopaedic implants. Forgings -- Method for specifying forgings
CH/150/1 Obsolescent (2012) Withdrawal
BS 7328:1990 Specification for model steam engines and internal combustion engines for models
CW/15 Obsolescent (2011) Withdrawal
BS 7333:1990 Specification for slewing jib cranes MHE/3/3 Current Confirmation
BS 7335-1:1991 Installation of monolithic refractories -- Code of practice for installation by casting
RPI/1 Confirmed (2009) Reconfirmation
BS 7335-2:1991 Installation of monolithic refractories -- Code of practice for installation by gunning
RPI/1 Confirmed (2009) Reconfirmation
BS 7363:1990 Method for bead-on-plate (BOP) test for welds WEE/2 Confirmed (2009) Withdrawal
BS 7371-1:2009 Coatings on metal fasteners -- Specification for general requirements and selection guidelines
FME/9 Current Confirmation
BS 7371-3:2009 Coatings on metal fasteners -- Specifications for electroplated zinc coatings
FME/9 Current Confirmation
BS 7385-2:1993 Evaluation and measurement for vibration in buildings -- Guide to damage levels from groundborne vibration
GME/21/3 Confirmed (2009) Reconfirmation
BS 7388:1991 Guide for prevention of leaks from hydraulic fluid power systems
MCE/18 Confirmed (2009) Reconfirmation
BS 7407:1991 Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children
CW/15 Obsolescent (2011) Withdrawal
BS 7409:1996 Specification for safety requirements for wheeled child conveyances
CW/1/2 Replaced by BS EN 1888:2003 as it is called up in the Wheeled Child Conveyances (Safety) Regulations 1997
Withdrawal
BS 7412:2007 Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles
B/538/1 Current Confirmation
BS 7414:1991 Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B
B/538/1 Current Confirmation
BS 7416:1991 Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
MCE/18 Confirmed (2009) Reconfirmation
BS 7417:1991 Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
MCE/18 Confirmed (2009) Reconfirmation
BS 743:1970 Specification for materials for damp-proof courses
B/546 Partially replaced by BS 6398:1983, BS 6515:1984 and BS 8215:1991
Withdrawal
BS 7457:1994 Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves
PRI/72 Confirmed (2009) Reconfirmation
BS 7494-1:1991 Performance and testing of teleprotection equipment of power systems. -- Specification for narrow-band command systems
PEL/57 Confirmed (2009) Reconfirmation
BS 7533-13:2009
Pavements constructed with clay, natural stone or concrete pavers -- Guide for the design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts and clay pavers
B/507 Current Revision in progress
BS 7533-3:2005+A1:2009
Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements
B/507 Current Confirmation
BS 7557:1992 Specification for limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs
CW/47 Confirmed (2009) Reconfirmation
BS 7563:1999 Specification for non-prescriptive graduated support hosiery
CH/205/1 Current Confirmation
BS identifier Title Committee Status Final Review Outcome
BS 7590:1992 Method for statistically estimating the volume fraction of phases and constituents by systematic manual point counting with a grid
ISE/102 Confirmed (2009) Reconfirmation
BS 779:1989 Specification for cast iron boilers for central heating and indirect hot water supply (rated output 44 kW and above)
RHE/10 Confirmed (2009); Partially replaced by BS EN 303-1:1999 and BS EN 303-4:1999
Withdrawal
BS 7793-2:1996 Vitreous enamel coatings for use on bolted steel panels -- Specification for coatings on bolted steel panels for use in industrial liquid storage tanks
STI/36 Current Confirmation
BS 7797:1998 Specification for industrial duct heaters using metal-sheathed elements
PEL/27 Confirmed (2009) Reconfirmation
BS 7798:1998 Specification for industrial immersion heaters using metal-sheathed elements
PEL/27 Confirmed (2009) Reconfirmation
BS 7799-3:2006 Information security management systems -- Guidelines for information security risk management
IST/33 Current Withdrawal
BS 7800:2006 Automotive fuel. High octane (super) unleaded petrol. Specification
PTI/2 Current Withdrawal
BS 7830:1996 Guide to the design and preparation of on-screen documentation for users of application software
IST/15 Obsolescent (2011) Withdrawal
BS 7846:2009 Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1000 V, having low emission of smoke and corrosive gases when affected by fire. Specification
GEL/20/17 Current Confirmation
BS 7861-2:2009 Strata reinforcement support systems components used in coal mines -- Specification for flexible systems for roof reinforcement
MRE/1 Current Confirmation
BS 7863:2009 Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers
FSH/2 Current Revision in progress
BS 7870-6.1:1999
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations -- PVC insulated and PVC sheathed cables
GEL/20/16 Obsolescent (2012) Withdrawal
BS 7870-6.2:1999
LV and MV polymeric insulated cables for use by distribution and generation utilities -- XLPE or HEPR insulated and PVC sheathed cables
GEL/20/16 Obsolescent (2012) Withdrawal
BS 7870-6.3:1999
LV and MV polymeric insulated cables for use by distribution and generation utilities -- Cables with thermosetting insulation and non-halogenated sheath
GEL/20/16 Obsolescent (2012) Withdrawal
BS 7883:2005 Code of practice for the design, selection, installation, use andmainten ance of anchor devices conforming to BS EN 795
PH/5 Current Confirmation
BS 7888-4.1:2006+A1:2008
Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Cables with extruded insulation
GEL/20/11 Current Confirmation
BS 7888-4.2:2006+A1:2008
Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Cables with impregnated paper insulation
GEL/20/11 Current Confirmation
BS 7900:1998 Specification for examination of the surface texture of precision steel castings
ISE/111 Confirmed (2009) Reconfirmation
BS 7922:2004 Electric cables. Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV ($iU$dm = 420 kV). Requirements and test methods
GEL/20/16 Confirmed (2009) Reconfirmation
BS 7923:2004 Electric cables. Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV ($iU$dm = 300 kV). Requirements and test methods
GEL/20/16 Confirmed (2009) Reconfirmation
BS 7926:1998 Quantitative micrographic methods to determine the percentage content of non-metallic inclusions in cast steel
ISE/111 Confirmed (2009) Reconfirmation
BS 7928-2:2009 Head and face protection for cricketers -- Face protectors for cricket wicket-keepers
PH/6/6 Current Confirmation
BS 7941-1:1999 Methods for measuring the skid resistance of pavement surfaces -- Side-way force coefficient routine investigation machine
B/510/5 Replaced by BS 7941-1:2006 Withdrawal
BS 7958:2009 Closed circuit television (CCTV). Management and operation. Code of practice
GW/3 Current Confirmation
BS 7959-1:2004 Materials for the control of liquid spills -sorbency CII/63 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 7961:2004 Specification for a device for measuring the static vertical mass (noseweight)at the coupling point of the towed vehicle.
AUE/8 Confirmed (2009) Reconfirmation
BS 7967-2:2005 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances -- Guide for using electronic portable combustion gas analysers in measurement of carbon monoxide and determination of combustion performance
GSE/30 Current Confirmation
BS 7967-3:2005 Carbon monoxide in dwellings and combustion performance of gas-fired appliances -- Guide for responding to measurements obtained from electronic portable combustion gas analysers
GSE/30 Current Confirmation
BS 7969:2004 Adhesives. Ethyl and methyl cyanoacrylate types 1,2 and 3
PRI/52 Confirmed (2009) Reconfirmation
BS 7972:2001+A1:2009
Safety requirements and test methods for children's bedguards for domestic use
CW/1/3 Current Confirmation
BS 7984:2008 Keyholding and response services. Code of practice
GW/3 Current Confirmation
BS 7F 47:1990 Specification for cotton tape for aerospace purposes
ACE/65 Confirmed (2009) Reconfirmation
BS 8000-2.1:1990
Workmanship on building sites. Code of practice for concrete work -- Mixing and transporting concrete
B/517 Confirmed (2009) Withdrawal
BS 8102:2009 Code of practice for protection of below ground structures against water from the ground
B/526 Current Revision in progress
BS 8103-3:2009 Structural design of low-rise buildings -- Code of practice for timber floors and roofs for housing
B/204 Current Confirmation
BS 811:1950 Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
GME/25 Confirmed (2009) Reconfirmation
BS 812-105.1:1989
Testing aggregates. Methods for determination of particle shape -- Flakiness index
B/502/6 Obsolescent (2012); Replaced by BS EN 933-3:1997
Withdrawal
BS 812-105.2:1990
Testing aggregates. Methods for determination of particle shape -- Elongation index of coarse aggregate
B/502/6 Obsolescent (2011) Withdrawal
BS 812-110:1990
Testing aggregates -- Methods for determination of aggregate crushing value (ACV)
B/502/6 Obsolescent (2012); Partially replaced by BS EN 1097-2:1998
Confirmation
BS 812-111:1990
Testing aggregates -- Methods for determination of ten per cent fines value (TFV)
B/502/6 Obsolescent (2012); Partially replaced by BS EN 1097-2:1998
Confirmation
BS 812-112:1990
Testing aggregates -- Method for determination of aggregate impact value (AIV)
B/502/6 Obsolescent (2012); Partially replaced by BS EN 1097-2:1998
Confirmation
BS 812-119:1985
Testing aggregates -- Method for determination of acid-soluble material in fine aggregate
B/502/6 Obsolescent (2012); Replaced by BS EN 1744-1:1998
Confirmation
BS 812-124:2009
Testing aggregates -- Method for determination of frost heave
B/502/6 Current Confirmation
BS 812-2:1995 Testing aggregates -- Methods for determination of density
B/502/6 Partially replaced by BS EN 1097-3:1998
Confirmation
BS 8203:2001+A1:2009
Code of practice for installation of resilient floor coverings
PRI/60 Current Confirmation
BS 8213-4:2007 Windows, doors and rooflights -- Code of practice for the survey and installation of windows and external doorsets
B/538 Current Confirmation
BS 8298:1994 Code of practice for design and installation of natural stone cladding and lining
B/545 Replaced by BS 8298 Parts 1 to 4
Withdrawal
BS 8405:2003+A1:2009
Personal protective equipment against falls from a height. Descender devices. Single-hand operated for self or assisted rescue
PH/5 Current Confirmation
BS 8406:2009 Event stewarding and crowd safety. Code of practice
GW/3/-/16 Current Confirmation
BS 8407:2002 Specification for mechanical and spliced joints in conveyor belting for use underground
PRI/67 Confirmed (2009) Reconfirmation
BS 8409:2009 Fully enclosed play facilities. Code of practice SW/65 Current Confirmation
BS 8425:2003 Code of practice for installation of laminate floor coverings
PRI/60 Confirmed (2009) Reconfirmation
BS 8433:2004 Microwavable personal warmers. Specification PRI/68 Confirmed (2009) Reconfirmation
BS 8434-2:2003+A2:2009
Methods of test for assessment of the fire integrity of electric cables - unprotected small cables for use in emergency circuits. BS EN 50200 with a 930$0D flame and with water spray
GEL/20/18 Current Confirmation
BS 8451:2004 Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
PRI/66 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS 8461:2005+A1:2009
Football goals. Code of practice for their procurement, installation, maintenance, storage and inspection
SW/136 Current Confirmation
BS 8466:2006 Hats. Protection against solar UVR. Method of test and performance requirements
TCI/66 Current Confirmation
BS 8468-3.1:2009
Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Specification
PH/4 Current Confirmation
BS 8468-3.2:2009
Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Air-purifying devices incorporating a hood for escape. Specification
PH/4 Current Confirmation
BS 8492:2009 Telecommunications equipment and telecommunications cabling. Code of practice for fire performance and protection
TCT/7/2 Current Confirmation
BS 8495:2007 Code of practice for digital CCTV recording systems for the purpose of image export to be used as evidence
GW/1/10 Current Confirmation
BS 8499:2009 Specification for domestic gas meter boxes and meter bracket
GSE/25 Current Confirmation
BS 8507-2:2009 Code of practice for close protection services -- Services outside the United Kingdom
GW/3 Current Confirmation
BS 8510:2009 Child use and care articles. Safety of children's sleep bags. Safety requirements and test methods
CW/1/5 Current Confirmation
BS 8513:2009 Personal fall protection equipment. Twin-legged energy-absorbing lanyards. Specification
PH/5 Current Confirmation
BS 8517-1:2009 Security dogs -- Code of practice for the use of general purpose security dogs
GW/3 Current Confirmation
BS 8520-1:2009 Equipment used in the controlled removal of asbestos-containing materials -- Controlled wetting equipment. Specification
HS/1 Current Confirmation
BS 8520-2:2009 Equipment used in the controlled removal of asbestos-containing materials -- Negative pressure units. Specification
HS/1 Current Confirmation
BS 8520-3:2009 Equipment used in the controlled removal of asbestos-containing materials -- Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice
HS/1 Current Confirmation
BS 8521:2009 Specification for dual-tone multi-frequency (DTMF) signalling protocol for social alarm systems
GW/1/12 Current Reconfirmation
BS 8522:2009 Furniture removal activities. Commercial moving services
SVS/7/2 Current Confirmation
BS 864-3:1975 Capillary and compression tube fittings of copper and copper alloy -- Compression fittings for polyethylene pipes
NFE/34 Obsolescent (2011) Withdrawal
BS 8726-1:2002 Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design -- Compression springs
FME/9/3 Confirmed (2009) Reconfirmation
BS 8726-2:2002 Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design -- Torsion springs
FME/9/3 Confirmed (2009) Reconfirmation
BS 8887-2:2009 Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- Terms and definitions
TDW/4 Current Confirmation
BS 8902:2009 Responsible sourcing sector certification schemes for construction products. Specification
SDS/1/6 Current Confirmation
BS 8F 35:2002 Braided linen (flax) lacing cord for aerospace purposes
ACE/65 Confirmed (2009) Reconfirmation
BS 9000-3:1996 General requirements for a system for electronic components of assessed quality -- Specification for the national implementation of the IECQ system
EPL/40X Confirmed (2009) Reconfirmation
BS 903-1:1995 Physical testing of rubber -- Guide to the selection and use of methods of test for rubber
PRI/22 Obsolescent (2012) Withdrawal
BS 903-A9:1988 Physical testing of rubber -- Determination of abrasion resistance
PRI/22 Obsolescent (2012); Partially replaced by BS ISO 4649:2002
Withdrawal
BS 903-C4:1983 Physical testing of rubber -- Determination of electric strength
PRI/22/-/5 Current Reconfirmation
BS 9070-3:1970 Specification for fixed capacitors of assessed quality: generic data and methods of test -- Tantalum electrolytic capacitors
EPL/40X Replaced by BS CECC 30800:1978, due to existing approvals
Withdrawal
BS identifier Title Committee Status Final Review Outcome
BS 9074 N007:1978
Detail specification for fixed polystyrene film dielectric extended foil capacitors. Rectangular non-metallic case, unidirectional terminations. Full plus additional assessment level
EPL/40X Replaced by BS 9074 N007:1981, due to existing approvals
Withdrawal
BS 91:1998 Electric cable soldering sockets. Specification GEL/20/11 Obsolescent (2011) Withdrawal
BS 9120:1988 Specification for radio interference suppression filters of assessed quality: generic data and methods of test
EPL/40X Partially replaced by BS EN 133000:1997
Withdrawal
BS 9121:1988 Blank detail specification for radio interference suppression filters of assessed quality. Basic and full assessment levels
EPL/40X Partially replaced by BS EN 133000:1997
Withdrawal
BS 9210 N001-1:1975
Detail specification for radio frequency connectors (type BNC). Sealed, soldered, captive contact, 50 ohms -- Full assessment level
EPL/46 Confirmed (2009) Reconfirmation
BS 9210:1984 Specification for radio frequency connectors of assessed quality: generic data and methods of test
EPL/46 Replaced by BS CECC 22000:1980 due to existing approvals
Withdrawal
BS 949-1:1992 Screwing taps -- Specification of general dimensions
MTE/18 Confirmed (2009) Reconfirmation
BS 949-3:1993 Screwing taps. -- Specification for pipe thread taps
MTE/18 Confirmed (2009) Reconfirmation
BS 951:2009 Electrical earthing. Clamps for earthing and bonding. Specification
GEL/600 Current Confirmation
BS 952-1:1995 Glass for glazing -- Classification B/520/4 Confirmed (2008) Reconfirmation
BS 9620:1975 Specification for quartz crystal oscillators of assessed quality: generic data and methods of test
EPL/49 Obsolescent (2011) Withdrawal
BS A 211:1961 Specification for 100$0D countersunk head steel bolts (Unified threads and cruciform recesses) for aircraft
ACE/12 Partially replaced by BS A 273:1978
Confirmation
BS A 22:1947 Units of measurement in civil aviation ACE/1 Confirmed (2009) Reconfirmation
BS AU 149a:1980
Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal)
AUE/16 Obsolescent (2011) Withdrawal
BS AU 177a:1980
Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary)
AUE/16 Obsolescent (2011) Withdrawal
BS AU 194:1984 Specification for performance of electrical connections between towing vehicles and trailers
AUE/16 Obsolescent (2012) Withdrawal
BS AU 196:1984 Specification for electrical connections between 24 V trailer antilock braking systems and towing vehicles
AUE/16 Obsolescent (2012) Withdrawal
BS AU 224b:1997
Specification for portable wheel ramps for cars and light vans
AUE/9 Obsolescent (2011) Withdrawal
BS AU 236:1990 Specification for circular electronic tachographs for road vehicles
AUE/9 Confirmed (2009) Reconfirmation
BS AU 5:1963 Specification for dimensions of a 'contact' type coupling for vacuum and pressure braking systems on trailers and semi-trailers
AUE/11 Partially replaced by BS AU 138a:1980
Withdrawal
BS G 102:1971 Specification for general requirements for rotating electrical machinery
ACE/1 Confirmed (2009) Reconfirmation
BS G 118:1949 Specification for aircraft magnetic compass, direct-reading
ACE/1 Confirmed (2009) Reconfirmation
BS G 122:1949 Specification for aircraft magnetic compass, remote-reading (gyro-stabilized)
ACE/1 Confirmed (2009) Reconfirmation
BS G 123:1949 Specification for aircraft magnetic compass, remote-reading (non-stabilized)
ACE/1 Confirmed (2009) Reconfirmation
BS G 125:1950 Specification for turn and slip indicators for aircraft purposes
ACE/1 Confirmed (2009) Reconfirmation
BS G 133:1951 Specification for electro-magnetic indicators for extra low voltage aircraft systems
ACE/1 Confirmed (2009) Reconfirmation
BS G 152:1956 Specification for a.c. electrically-operated artificial horizons for aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS G 154:1958 Screws with captive washers for aircraft ACE/6 Partially replaced by BS G 203:1967
Withdrawal
BS G 183:1963 Specification for interconnections in analogue data transmission systems in aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS G 190:1964 Specification for cabin altimeters for aircraft ACE/1 Confirmed (2009) Reconfirmation
BS G 194:1965 Specification for lever-operated manual switches for aircraft
ACE/6 Replaced by BS G 224:1978 Withdrawal
BS G 200:1967 Specification for miniature lever-operated manual switches
ACE/6 Replaced by BS G 224:1978 Withdrawal
BS G 211:1971 Specification for reflection-reducing coating of instrument windows and lighting wedges
ACE/1 Confirmed (2009) Reconfirmation
BS G 226:1979 Specification for counter and pointer, servo type, pressure altimeter systems
ACE/1 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS G 234:1984 Specification for self-aligning air flow angle transmitters for use on aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS G 240:1988 Specification for pressure transducers for use on aircraft
ACE/1 Confirmed (2009) Reconfirmation
BS G 246:1991 Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses
ACE/6 Partially replaced by parts of BS EN 4056 & BS EN 4057
Withdrawal
BS G 257-3:2004
Design of electromagnetic hazard protection of civil aircraft -- Guide to clearance and testing
ACE/66 Confirmed (2009) Reconfirmation
BS HC 202:1973 Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS HC 205:1974 Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS HC 206:1975 Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS HC 301:1973 Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5)
ACE/61/-/48 Confirmed (2009) Reconfirmation
BS L 102:1971 Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
ACE/61/-/24 Replaced by BS EN 2100:1992 Withdrawal
BS L 111:1971 Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
ACE/61/-/24 Replaced by BS EN 2326:1992 Withdrawal
BS L 112:1971 Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 160:1976 Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
ACE/61/-/24 Replaced by BS EN 2127:1992 Withdrawal
BS L 168:1978 Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 171:1990 Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 172:1989 Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 173:1991 Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 174:1991 Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS L 513:1973 Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
ACE/61/-/24 Confirmed (2009) Reconfirmation
BS M 22:1949 Specification for silica gel acid activated for aircraft purposes
ACE/1 Confirmed (2009) Reconfirmation
BS M 33:1970 Specification for dimensions of elastomeric toroidal sealing rings (inch series) to Class 1 tolerances for aircraft
ACE/12 Replaced by BS M 48:1976 Withdrawal
BS M 34:1970 Method of preparation and use of radiographic techniques
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS M 36:1970 Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 37:1970 Method for the etch inspection of metallic materials and components
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 38:1971 Guide to compilation of instructions and reports for the in-service non-destructive testing of aerospace products
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 39:1972 Method for penetrant inspection of aerospace materials and components
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 40:1972 Methods for measuring coating thickness by non-destructive testing
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 42:1972 Methods for non-destructive testing of fusion and resistance welds in thin gauge materials
ACE/61/-/5 Confirmed (2009) Reconfirmation
BS M 43:1973 Methods of zoning aircraft and referencing access doors and panels
ACE/1 Confirmed (2009) Reconfirmation
BS QC 200012:1996
Process assessment schedule for printed board design facilities
EPL/501 Confirmed (2009) Withdrawal
BS QC 210000:1996
Technology approval schedules. Requirements under the IEC Quality Assessment System for Electronic Components (IECQ)
EPL/40X Confirmed (2009) Reconfirmation
BS S 134:1965 Specification for aircraft material. 3 per cent chromium-molybdenum-vanadium steel (air hardening) (100 tonf/sq in: limiting ruling section 1$9B inches)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS S 148:1969 Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only)
ACE/61/-/15 Confirmed (2009) Revision in progress
BS S 153:1976 Specification. 2$9H% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1230-1430 MPa: limiting ruling section 40 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 154:1976 Specification. 2$9H% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 155:1976 Specification for nickel-silicon-chromium-molybdenum-vanadium steel (vacuum arc remelted) billets, bars, forgings and parts (1900-2100 MPa: limiting ruling section 75 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 156:1976 Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1320-1520 MPa)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 157:1976 Specification. 3% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1180-1380 MPa)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 158:1977 Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 159:1981 Specification for 12% chromium-nickel-molybdenum-vanadium heat-resisting steel bars for the manufacture of fasteners (1100-1300 MPa: limiting ruling section 50 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 160:1990 Specification for chromium-nickel corrosion-resisting steel - bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 18, Ni 10.5, controlled nitrogen content)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 161:1990 Specification for chromium-nickel-molybdenum corrosion-resisting steel. Bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 17.5, Ni 12.5, Mo 2.25, controlled nitrogen content)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS S 163:1990 Specification for nickel-chromium-molybdenum-vanadium steel forging stock, forgings, bars and parts (1900 MPa : limiting ruling section 100 mm)
ACE/61/-/15 Confirmed (2009) Reconfirmation
BS SP 118:1958 Tie rods (Unified threads) for aircraft ACE/12 Obsolescent (2012) Withdrawal
BS SP 53:1953 Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed steel wire rope for aircraft (suitable for use with British Standard W.9 wire rope)
ACE/12 Obsolescent (2012) Withdrawal
BS SP 54:1953 Specification for swaged cable-end assemblies (B.A. and B.S.F. threads) for preformed non-corrodible steel wire rope for aircraft (suitable for use with British Standard W.11 wire rope)
ACE/12 Confirmed (2006) Withdrawal
BS V 38:1967 Specification for Sitka spruce as rough timber ACE/65 Obsolescent (2012) Withdrawal
BS X 36:1998 Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes
ACE/65/-/3 Confirmed (2009) Reconfirmation
BS identifier Title Committee Status Final Review Outcome
BS X 37:2004 Intumescent paint for aerospace purposes. Specification
ACE/65/-/3 Confirmed (2009) Reconfirmation
CP 102:1973 Code of practice for protection of buildings against water from the ground
B/546 Partially replaced by BS 8102:1990 and BS 8215:1991
Withdrawal
CP 118:1969 The structural use of aluminium B/525/9 Replaced by BS 8118-1:1991 and BS 8118-2:1991
Withdrawal
DD 140-2:1987 Wall ties -- Recommendations for design of wall ties
B/519/3 Confirmed (2011) Withdrawal
DD 216:1993 Method for determination of chloride content of fresh concrete
B/517/1 Obsolescent (2011) Withdrawal
DD 249:1999 Testing aggregates. Method for the assessment of alkali-silica reactivity. Potential accelerated mortar-bar method
B/502/6 Confirmed (2011) Confirmation
DD 256:2002 Assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption. Specification
EH/6 Obsolescent (2011) Withdrawal
DD 265:2008 Protocol for communications between a lift alarm system and an alarm receiving station (rescue centre). Specification
MHE/4 Confirmed (2012) Withdrawal
DD 8455:2007 Materials for gaskets and weatherstripping for windows, doors, conservatories and curtain walling. Requirements and test methods
B/538/4 Confirmed (2011) Withdrawal
DD 8483:2008 Cranes. Condition monitoring. Specification for data logging equipment
MHE/3/11 Confirmed (2011) Withdrawal
PD 60065:2001 Interpretation sheets for BS EN 60065:1998. Audio, video and similar electronic apparatus. Safety requirements
EPL/108 Replaced by BS EN 60065:2002+A12:2011
Withdrawal
PD 6495:1992 IFAN-Guide 1. Method for determining the advantages of (company) standardization projects
BSSMP/- Current Withdrawal
PD 6513:1985 Magnetic particle flaw detection. A guide to the principles and practice of applying magnetic particle flaw detection in accordance with BS 6072
WEE/46 Current Confirmation
PD 6547:2004+A1:2009
Guidance on the use of BS EN 40-3-1 and BS EN 40-3-3
B/509 Current Confirmation
PD 6682-3:2003 Aggregates -- Aggregates for mortar. Guidance on the use of BS EN 13139
B/502 Confirmed (2008) Reconfirmation
PD 6682-8:2004 Aggregates -- Aggregates for railway ballast. Guidance on the use of BS EN 13450
B/502 Current Confirmation
PD 6688-1-4:2009
Background information to the National Annex to BS EN 1991-1-4 and additional guidance
B/525/1 Current Confirmation
PD 6689:2009 Surface treatments. Guidance on the use of BS EN 12271 and BS EN 12273
B/510/2 Current Confirmation
PD 6692:2006 Asphalt. Guidance on the use of BS EN 12697 "Bituminous mixtures. Test methods for hot mix asphalt"
B/510/1 Current Confirmation
PD 6695-1-10:2009
Recommendations for the design of structures to BS EN 1993-1-10
CB/203 Current Confirmation
PD 6695-1-9:2008
Recommendations for the design of structures to BS EN 1993-1-9
B/525/10 Current Confirmation
PD 6698:2009 Recommendations for the design of structures for earthquake resistance to BS EN 1998
B/525/8 Current Confirmation
PD 6702-1:2009 Structural use of aluminium -- Recommendations for the design of aluminium structures to BS EN 1999
B/525/9 Current Confirmation
PD 6703:2009 Structural bearings. Guidance on the use of structural bearings
B/522 Current Confirmation
PD 6705-3:2009 Structural use of steel and aluminium -- Recommendations for the execution of aluminium structures to BS EN 1090-3
B/525/9 Current Confirmation