b.tech 1st year engineering workshop lab manual

7/22/2019 B.tech 1st Year Engineering Workshop Lab Manual

1/29


2/29


3/29


4/29


5/29


6/29


7/29

Carpenters vice, steel rule, jack plane, try

per is firmly clamped in the carpenters vice and any two adjacent faces are planed by


8/29


9/29

Carpenters vice, steel rule, jack plane, try

2. The reaper is firmly clamped in the carpenters vice and any two adjacent faces are planed by


10/29


11/29


12/29


13/29


14/29


15/29

4. Round blocks (3Nos) are screwed onto the board, as per the diagram.


16/29


17/29

4. Round blocks (3Nos) are screwed onto the board, as p


18/29


19/29


20/29


21/29


22/29


23/29

Smiths fo

1. One end of the bar is heated to red hot condition in the smiths forge for the required length.


24/29


25/29

smiths forge, anvil, ball

1. One half of the rod is heated to red hot condition in the smiths forge.


26/29


27/29


28/29


29/29

Documents