BITS V3 Configuration – Ahmed Ezzat Zayed - 704955

1

1- SRCU/SOCU configuration

Select [Configure SRCU] to enter the dialog box for SRCU configuration.

SOCU/SRCU configuration

[Satellite receiver type]: Select “GPS”

GPS Satellite parameter configuration

BITS V3 Configuration – Ahmed Ezzat Zayed - 704955

2

.

2- TSOU Configuration

Select [Configure TSOU] to enter the dialog box for TSOU configuration.

Loading

Select [load xxx] from the menu of the unit, and the waiting prompt will appear.

BITS V3 Configuration – Ahmed Ezzat Zayed - 704955

3

3- Reference Source Configuration

Select [Data Configuration/Reference source] to enter the interface for reference source configuration. Prior to the entry, the terminal will query the data and display a waiting dialog box.

Reference source configuration

Right click on the blank of the reference source interface

[Add reference source]: The following dialog box is for adding a new reference source.

BITS V3 Configuration – Ahmed Ezzat Zayed - 704955

4

[Load all reference sources]: Load the data of all the reference sources.

4- System Data Configuration

Select [Configuration/System parameter] from the main menu

5- Monitoring and Maintenance

The monitoring and maintenance window monitors and maintains the SYNLOCK V3 system in real time. It consists of 4 parts: unit monitoring, reference source monitoring, port monitoring and clock unit status.

BITS V3 Configuration – Ahmed Ezzat Zayed - 704955

5

Double click [Monitoring & maintenance] in the navigator to enter the monitoring and maintenance interface. The [Monitoring/maintenance] menu appears in the main menu. Select the item to be monitored from it.

Unit Monitoring

Select a network element first.

Double click [Monitoring & Maintenance] in the navigator, the unit monitoring diagram appears.

BITS V3 Configuration – Ahmed Ezzat Zayed - 704955

6

i. Unit monitoring interface

The maintenance menus of some units are described below.

SOCU&SRCU

[Query satellite receiver status]: Query the satellite receiver status of the unit

[Query the satellite receiver mode/satellite number]: Query the current mode of the satellite receiver and the number of the satellites that are traced.

BITS V3 Configuration – Ahmed Ezzat Zayed - 704955

7

Clock Parameters

Select [Query clock unit status/Monitoring & maintenance] to query the status of SRCU/SOCU.