build your reputation on our reliabilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... ·...

12
BUILD YOUR REPUTATION ON OUR RELIABILITY. TM

Upload: others

Post on 09-Aug-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

Build your reputation on our reliaBility.tm

Page 2: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

tHere’s only one name you sHould Build Your reputation on. Carlyle.

If It Doesn’t SayGenuine Carlyle Remanufactured Compressors— It’s Not.

Only our seal of approval ensures good-as-newquality and performance.Carlyle remanufactured compressors are remanufactured—not rebuilt or

repaired and repainted like most others.

Those others won’t be built to Carlyle’s quality standards. Because before aremanufactured compressor can even bear our seal of approval, we tear it

down to its smallest component parts and compare them tostrict engineering standards and the latest technical advancesat our state-of-the-art Stone Mountain facility.

Even if it’s not broken, we fix it. In fact, we throw out millionsof parts that others might consider useable. Why? Because weare committed to remanufacturing compressors that go

beyond their original specifications to meet current engineering standardsthat ensure their reliability and performance.

To ensure you’re getting good as new quality and performance, look for theGenuine Carlyle Remanufactured Compressors seal of approval.

performance and reliability are assured only in a genuine Carlyle remanufactured compressor.

A remanufactured compressor by any other name is just that: a remanufactured compressor. If you’re not using a Genuine Carlyle Remanufactured Compressor, you’re taking a risk with both reliability and performance.

Carlyle uses sophisticated technology, experience and rigid testing standards to give you remanufactured compressors that meet current engineering specifications for optimum reliability and performance. The result is every genuine Carlyle remanufactured compressor operates good as new so you don’t have to worry about failures or costly customer callbacks.

If you want a remanufactured compressor that reflects well on you ‑– one that your customers will appreciate for its reliability and performance –– select Carlyle. It’s the genuine remanufactured compressor.

Giving new life to the world’s most reliable compressors.

Carlyle’s state-of-the-art Stone Mountain facility, 16 miles east of Atlanta, GA, sets a standard of compressor remanufacturing few can match. Here, over 300 skilled men and women use sophisticated technology, experience and rigid testing standards to transform returned Carlyle compressors back into good-as-new performance and reliability.

There’s Only One Name You Should Build Your Reputation On. Carlyle.

Performance and reliability are assured only in a genuine Carlyle remanufactured compressor.A remanufactured compressor by any other name is just that: a remanufac-

tured compressor. If you’re not using a Genuine Carlyle Remanufactured

Compressor, you’re taking a risk with both reliability and performance.

Carlyle uses sophisticated technology, experience and rigid testing standards

to give you remanufactured compressors that meet current engineering

specifications for optimum reliability and performance. The result is every

genuine Carlyle remanufactured compressor operates good as new so you

don’t have to worry about failures or costly customer callbacks.

If you want a remanufactured compressor that reflects well on you—and

one that your customers will appreciate for its reliability and performance—

select Carlyle. It’s the genuine remanufactured compressor.

Giving new life to the world’s most reliable compressors.Carlyle’s state-of-the-art Stone Mountain facility, 16 miles east of Atlanta,

GA, sets a standard of compressor remanufacturing few can match.

Here, over 300 skilled men and women use sophisticated technology,

experience and rigid testing standards to transform returned Carlyle

compressors back into good-as-new performance and reliability.

There’s Only One Name You Should Build Your Reputation On. Carlyle.

Performance and reliability are assured only in a genuine Carlyle remanufactured compressor.A remanufactured compressor by any other name is just that: a remanufac-

tured compressor. If you’re not using a Genuine Carlyle Remanufactured

Compressor, you’re taking a risk with both reliability and performance.

Carlyle uses sophisticated technology, experience and rigid testing standards

to give you remanufactured compressors that meet current engineering

specifications for optimum reliability and performance. The result is every

genuine Carlyle remanufactured compressor operates good as new so you

don’t have to worry about failures or costly customer callbacks.

If you want a remanufactured compressor that reflects well on you—and

one that your customers will appreciate for its reliability and performance—

select Carlyle. It’s the genuine remanufactured compressor.

Giving new life to the world’s most reliable compressors.Carlyle’s state-of-the-art Stone Mountain facility, 16 miles east of Atlanta,

GA, sets a standard of compressor remanufacturing few can match.

Here, over 300 skilled men and women use sophisticated technology,

experience and rigid testing standards to transform returned Carlyle

compressors back into good-as-new performance and reliability.

There’s Only One Name You Should Build Your Reputation On. Carlyle.

Performance and reliability are assured only in a genuine Carlyle remanufactured compressor.A remanufactured compressor by any other name is just that: a remanufac-

tured compressor. If you’re not using a Genuine Carlyle Remanufactured

Compressor, you’re taking a risk with both reliability and performance.

Carlyle uses sophisticated technology, experience and rigid testing standards

to give you remanufactured compressors that meet current engineering

specifications for optimum reliability and performance. The result is every

genuine Carlyle remanufactured compressor operates good as new so you

don’t have to worry about failures or costly customer callbacks.

If you want a remanufactured compressor that reflects well on you—and

one that your customers will appreciate for its reliability and performance—

select Carlyle. It’s the genuine remanufactured compressor.

Giving new life to the world’s most reliable compressors.Carlyle’s state-of-the-art Stone Mountain facility, 16 miles east of Atlanta,

GA, sets a standard of compressor remanufacturing few can match.

Here, over 300 skilled men and women use sophisticated technology,

experience and rigid testing standards to transform returned Carlyle

compressors back into good-as-new performance and reliability.

Page 3: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

If It Doesn’t SayGenuine Carlyle Remanufactured Compressors— It’s Not.

Only our seal of approval ensures good-as-newquality and performance.Carlyle remanufactured compressors are remanufactured—not rebuilt or

repaired and repainted like most others.

Those others won’t be built to Carlyle’s quality standards. Because before aremanufactured compressor can even bear our seal of approval, we tear it

down to its smallest component parts and compare them tostrict engineering standards and the latest technical advancesat our state-of-the-art Stone Mountain facility.

Even if it’s not broken, we fix it. In fact, we throw out millionsof parts that others might consider useable. Why? Because weare committed to remanufacturing compressors that go

beyond their original specifications to meet current engineering standardsthat ensure their reliability and performance.

To ensure you’re getting good as new quality and performance, look for theGenuine Carlyle Remanufactured Compressors seal of approval.

There’s Only One Name You Should Build Your Reputation On. Carlyle.

Performance and reliability are assured only in a genuine Carlyle remanufactured compressor.A remanufactured compressor by any other name is just that: a remanufac-

tured compressor. If you’re not using a Genuine Carlyle Remanufactured

Compressor, you’re taking a risk with both reliability and performance.

Carlyle uses sophisticated technology, experience and rigid testing standards

to give you remanufactured compressors that meet current engineering

specifications for optimum reliability and performance. The result is every

genuine Carlyle remanufactured compressor operates good as new so you

don’t have to worry about failures or costly customer callbacks.

If you want a remanufactured compressor that reflects well on you—and

one that your customers will appreciate for its reliability and performance—

select Carlyle. It’s the genuine remanufactured compressor.

Giving new life to the world’s most reliable compressors.Carlyle’s state-of-the-art Stone Mountain facility, 16 miles east of Atlanta,

GA, sets a standard of compressor remanufacturing few can match.

Here, over 300 skilled men and women use sophisticated technology,

experience and rigid testing standards to transform returned Carlyle

compressors back into good-as-new performance and reliability.

only our seal of approval ensures good-as-new quality and performance.

Carlyle remanufactured compressors are remanufactured –– not rebuilt or repaired and repainted like most others.

Those others won’t be built to Carlyle’s quality standards. Because before a remanufactured compressor can even bear our seal of approval, we tear it down to its smallest component parts and compare them to strict engineering standards and the latest technical advances at our state-of-the-art Stone Mountain facility.

Even if it’s not broken, we fix it. In fact, we throw out millions of parts that others might consider useable. Why? Because we are committed to remanufacturing compressors that go beyond their original specifications to meet current engineering standards that ensure their reliability and performance.

To ensure you’re getting good as new quality and performance, look for the Genuine Carlyle Remanufactured Compressors seal of approval.

if it doesn’t say Genuine CarlYle remanufaCtured Compressors — it’s not.

Page 4: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

Carlyle’s sopHistiCated remanufaCturinG proCess.

disassembly/Warranty inspection At disassembly, all critical wearing parts are discarded as scrap. All gaskets fall into this category, as well as bearings, piston rings, suction and discharge valves, wrist pin snap rings and the nameplate.

Cleaning The crankcase and all parts are put through environmentally safe multistage cleaning processes to remove dirt, foreign material and passageway obstructions, and then are inspected for cleanliness.

Crankcase inspection Crankcases are visually inspected for integrity of gasket surfaces and threaded holes. All cylinder bores are dimensionally inspected to stringent Carlyle specifications using precision air gauging with an accuracy of .00005 inch.

Crankcase upgrade Cylinder walls that do not meet Carlyle’s rigorous specifications are marked for remachining. The crankcase is then rechecked to verify that it is compliant.

Crankshaft upgrade Crankshaft rod journals and bearing surfaces are polished using fine grit emery belts and then gauged to ensure compliance with Carlyle dimensional specifications. Oil passages are brushed and cleaned in a power flush system. In the final step, crankshafts are blown clean using dry compressed air and wrapped in moistureproof paper.

Valve plate upgrade All valve plates are reground and measured to make sure they meet Carlyle specifications.

Carlyle’s Sophisticated Remanufacturing Process.

Disassembly/Warranty InspectionAt disassembly, all critical wearing parts are discarded as scrap. All gaskets fall into this

category, as well as bearings, piston rings, suction and discharge valves, wrist pin snap

rings and the nameplate.

CleaningThe crankcase and all parts are put through environmentally safe multistage cleaning

processes to remove dirt, foreign material and passageway obstructions, and then are

inspected for cleanliness.

Crankcase InspectionCrankcases are visually inspected for integrity of gasket surfaces and threaded holes.

All cylinder bores are dimensionally inspected to stringent Carlyle specifications using

precision air gaging with an accuracy of .00005 inch.

Crankcase UpgradeCylinder walls that do not meet Carlyle’s rigorous specifications are marked for

remachining. The crankcase is then rechecked to verify that it is compliant.

Crankshaft UpgradeCrankshaft rod journals and bearing surfaces are polished using fine grit emery belts and

then gauged to ensure compliance with Carlyle dimensional specifications. Oil passages

are brushed and cleaned in a power flush system. In the final step, crankshafts are blown

clean using dry compressed air and wrapped in moistureproof paper.

Valve Plate UpgradeAll valve plates are reground and measured to make sure they meet Carlyle specifications.

Carlyle’s Sophisticated Remanufacturing Process.

Disassembly/Warranty InspectionAt disassembly, all critical wearing parts are discarded as scrap. All gaskets fall into this

category, as well as bearings, piston rings, suction and discharge valves, wrist pin snap

rings and the nameplate.

CleaningThe crankcase and all parts are put through environmentally safe multistage cleaning

processes to remove dirt, foreign material and passageway obstructions, and then are

inspected for cleanliness.

Crankcase InspectionCrankcases are visually inspected for integrity of gasket surfaces and threaded holes.

All cylinder bores are dimensionally inspected to stringent Carlyle specifications using

precision air gaging with an accuracy of .00005 inch.

Crankcase UpgradeCylinder walls that do not meet Carlyle’s rigorous specifications are marked for

remachining. The crankcase is then rechecked to verify that it is compliant.

Crankshaft UpgradeCrankshaft rod journals and bearing surfaces are polished using fine grit emery belts and

then gauged to ensure compliance with Carlyle dimensional specifications. Oil passages

are brushed and cleaned in a power flush system. In the final step, crankshafts are blown

clean using dry compressed air and wrapped in moistureproof paper.

Valve Plate UpgradeAll valve plates are reground and measured to make sure they meet Carlyle specifications.

Carlyle’s Sophisticated Remanufacturing Process.

Disassembly/Warranty InspectionAt disassembly, all critical wearing parts are discarded as scrap. All gaskets fall into this

category, as well as bearings, piston rings, suction and discharge valves, wrist pin snap

rings and the nameplate.

CleaningThe crankcase and all parts are put through environmentally safe multistage cleaning

processes to remove dirt, foreign material and passageway obstructions, and then are

inspected for cleanliness.

Crankcase InspectionCrankcases are visually inspected for integrity of gasket surfaces and threaded holes.

All cylinder bores are dimensionally inspected to stringent Carlyle specifications using

precision air gaging with an accuracy of .00005 inch.

Crankcase UpgradeCylinder walls that do not meet Carlyle’s rigorous specifications are marked for

remachining. The crankcase is then rechecked to verify that it is compliant.

Crankshaft UpgradeCrankshaft rod journals and bearing surfaces are polished using fine grit emery belts and

then gauged to ensure compliance with Carlyle dimensional specifications. Oil passages

are brushed and cleaned in a power flush system. In the final step, crankshafts are blown

clean using dry compressed air and wrapped in moistureproof paper.

Valve Plate UpgradeAll valve plates are reground and measured to make sure they meet Carlyle specifications.

Carlyle’s Sophisticated Remanufacturing Process.

Disassembly/Warranty InspectionAt disassembly, all critical wearing parts are discarded as scrap. All gaskets fall into this

category, as well as bearings, piston rings, suction and discharge valves, wrist pin snap

rings and the nameplate.

CleaningThe crankcase and all parts are put through environmentally safe multistage cleaning

processes to remove dirt, foreign material and passageway obstructions, and then are

inspected for cleanliness.

Crankcase InspectionCrankcases are visually inspected for integrity of gasket surfaces and threaded holes.

All cylinder bores are dimensionally inspected to stringent Carlyle specifications using

precision air gaging with an accuracy of .00005 inch.

Crankcase UpgradeCylinder walls that do not meet Carlyle’s rigorous specifications are marked for

remachining. The crankcase is then rechecked to verify that it is compliant.

Crankshaft UpgradeCrankshaft rod journals and bearing surfaces are polished using fine grit emery belts and

then gauged to ensure compliance with Carlyle dimensional specifications. Oil passages

are brushed and cleaned in a power flush system. In the final step, crankshafts are blown

clean using dry compressed air and wrapped in moistureproof paper.

Valve Plate UpgradeAll valve plates are reground and measured to make sure they meet Carlyle specifications.

Carlyle’s Sophisticated Remanufacturing Process.

Disassembly/Warranty InspectionAt disassembly, all critical wearing parts are discarded as scrap. All gaskets fall into this

category, as well as bearings, piston rings, suction and discharge valves, wrist pin snap

rings and the nameplate.

CleaningThe crankcase and all parts are put through environmentally safe multistage cleaning

processes to remove dirt, foreign material and passageway obstructions, and then are

inspected for cleanliness.

Crankcase InspectionCrankcases are visually inspected for integrity of gasket surfaces and threaded holes.

All cylinder bores are dimensionally inspected to stringent Carlyle specifications using

precision air gaging with an accuracy of .00005 inch.

Crankcase UpgradeCylinder walls that do not meet Carlyle’s rigorous specifications are marked for

remachining. The crankcase is then rechecked to verify that it is compliant.

Crankshaft UpgradeCrankshaft rod journals and bearing surfaces are polished using fine grit emery belts and

then gauged to ensure compliance with Carlyle dimensional specifications. Oil passages

are brushed and cleaned in a power flush system. In the final step, crankshafts are blown

clean using dry compressed air and wrapped in moistureproof paper.

Valve Plate UpgradeAll valve plates are reground and measured to make sure they meet Carlyle specifications.

Carlyle’s Sophisticated Remanufacturing Process.

Disassembly/Warranty InspectionAt disassembly, all critical wearing parts are discarded as scrap. All gaskets fall into this

category, as well as bearings, piston rings, suction and discharge valves, wrist pin snap

rings and the nameplate.

CleaningThe crankcase and all parts are put through environmentally safe multistage cleaning

processes to remove dirt, foreign material and passageway obstructions, and then are

inspected for cleanliness.

Crankcase InspectionCrankcases are visually inspected for integrity of gasket surfaces and threaded holes.

All cylinder bores are dimensionally inspected to stringent Carlyle specifications using

precision air gaging with an accuracy of .00005 inch.

Crankcase UpgradeCylinder walls that do not meet Carlyle’s rigorous specifications are marked for

remachining. The crankcase is then rechecked to verify that it is compliant.

Crankshaft UpgradeCrankshaft rod journals and bearing surfaces are polished using fine grit emery belts and

then gauged to ensure compliance with Carlyle dimensional specifications. Oil passages

are brushed and cleaned in a power flush system. In the final step, crankshafts are blown

clean using dry compressed air and wrapped in moistureproof paper.

Valve Plate UpgradeAll valve plates are reground and measured to make sure they meet Carlyle specifications.

Page 5: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

Compressor testingAll remanufactured compressors are load tested to criteria that verify performance by measuring flow, loaded amp draw and oil pressure. Each compressor undergoes submerge as well as helium leak tests to verify the integrity of its pressure enclosure.

paintingCompressors are painted using an electrostatic paint process that ensures even and complete paint coverage, avoiding unsightly irregularities on the finished compressor.

Rod and Piston UpgradeRods and pistons are visually inspected for physical damage and processed to remove

minor burrs. Wrist pin holes and crankshaft bores are checked using precision air gaging to

ensure proper sizing and compliance with Carlyle dimensional specifications.

Oil Pump UpgradeOil pump rotor, bearing and vane diameters are dimensionally inspected using precision

air gauging. Then the pumps are reassembled and functionally tested to ensure compli-

ance with Carlyle specifications for flow, oil pressure and watts.

Motor Rewind ShopStators are rewound, varnish dipped and electronically tested to specifications that meet

or exceed original UL standards to ensure the highest level of quality, performance

and reliability.

Quality AuditorEach work day, a full-time auditor inspects five randomly selected finished compressors.

Compressor AssemblyIn the final operation, the highly experienced technicians carefully assemble the remanu-

factured compressor. New bearings are installed, rod and pistons are connected to the

crankshaft, the stator is inserted in the crankcase and the rotor is precisely aligned into it.

Valve plates and cylinder heads are added and wiring is completed.

Compressor TestingAll remanufactured compressors are load tested to criteria that verify performance by

measuring flow, loaded amp draw and oil pressure. Each compressor undergoes

submerge as well as helium leak tests to verify the integrity of its pressure enclosure.

PaintingCompressors are painted using an electrostatic paint process that ensures even

and complete paint coverage, avoiding unsightly irregularities on the finished compressor.

Rod and Piston UpgradeRods and pistons are visually inspected for physical damage and processed to remove

minor burrs. Wrist pin holes and crankshaft bores are checked using precision air gaging to

ensure proper sizing and compliance with Carlyle dimensional specifications.

Oil Pump UpgradeOil pump rotor, bearing and vane diameters are dimensionally inspected using precision

air gauging. Then the pumps are reassembled and functionally tested to ensure compli-

ance with Carlyle specifications for flow, oil pressure and watts.

Motor Rewind ShopStators are rewound, varnish dipped and electronically tested to specifications that meet

or exceed original UL standards to ensure the highest level of quality, performance

and reliability.

Quality AuditorEach work day, a full-time auditor inspects five randomly selected finished compressors.

Compressor AssemblyIn the final operation, the highly experienced technicians carefully assemble the remanu-

factured compressor. New bearings are installed, rod and pistons are connected to the

crankshaft, the stator is inserted in the crankcase and the rotor is precisely aligned into it.

Valve plates and cylinder heads are added and wiring is completed.

Compressor TestingAll remanufactured compressors are load tested to criteria that verify performance by

measuring flow, loaded amp draw and oil pressure. Each compressor undergoes

submerge as well as helium leak tests to verify the integrity of its pressure enclosure.

PaintingCompressors are painted using an electrostatic paint process that ensures even

and complete paint coverage, avoiding unsightly irregularities on the finished compressor.

Rod and Piston UpgradeRods and pistons are visually inspected for physical damage and processed to remove

minor burrs. Wrist pin holes and crankshaft bores are checked using precision air gaging to

ensure proper sizing and compliance with Carlyle dimensional specifications.

Oil Pump UpgradeOil pump rotor, bearing and vane diameters are dimensionally inspected using precision

air gauging. Then the pumps are reassembled and functionally tested to ensure compli-

ance with Carlyle specifications for flow, oil pressure and watts.

Motor Rewind ShopStators are rewound, varnish dipped and electronically tested to specifications that meet

or exceed original UL standards to ensure the highest level of quality, performance

and reliability.

Quality AuditorEach work day, a full-time auditor inspects five randomly selected finished compressors.

Compressor AssemblyIn the final operation, the highly experienced technicians carefully assemble the remanu-

factured compressor. New bearings are installed, rod and pistons are connected to the

crankshaft, the stator is inserted in the crankcase and the rotor is precisely aligned into it.

Valve plates and cylinder heads are added and wiring is completed.

Compressor TestingAll remanufactured compressors are load tested to criteria that verify performance by

measuring flow, loaded amp draw and oil pressure. Each compressor undergoes

submerge as well as helium leak tests to verify the integrity of its pressure enclosure.

PaintingCompressors are painted using an electrostatic paint process that ensures even

and complete paint coverage, avoiding unsightly irregularities on the finished compressor.

Rod and Piston UpgradeRods and pistons are visually inspected for physical damage and processed to remove

minor burrs. Wrist pin holes and crankshaft bores are checked using precision air gaging to

ensure proper sizing and compliance with Carlyle dimensional specifications.

Oil Pump UpgradeOil pump rotor, bearing and vane diameters are dimensionally inspected using precision

air gauging. Then the pumps are reassembled and functionally tested to ensure compli-

ance with Carlyle specifications for flow, oil pressure and watts.

Motor Rewind ShopStators are rewound, varnish dipped and electronically tested to specifications that meet

or exceed original UL standards to ensure the highest level of quality, performance

and reliability.

Quality AuditorEach work day, a full-time auditor inspects five randomly selected finished compressors.

Compressor AssemblyIn the final operation, the highly experienced technicians carefully assemble the remanu-

factured compressor. New bearings are installed, rod and pistons are connected to the

crankshaft, the stator is inserted in the crankcase and the rotor is precisely aligned into it.

Valve plates and cylinder heads are added and wiring is completed.

Compressor TestingAll remanufactured compressors are load tested to criteria that verify performance by

measuring flow, loaded amp draw and oil pressure. Each compressor undergoes

submerge as well as helium leak tests to verify the integrity of its pressure enclosure.

PaintingCompressors are painted using an electrostatic paint process that ensures even

and complete paint coverage, avoiding unsightly irregularities on the finished compressor.

Rod and Piston UpgradeRods and pistons are visually inspected for physical damage and processed to remove

minor burrs. Wrist pin holes and crankshaft bores are checked using precision air gaging to

ensure proper sizing and compliance with Carlyle dimensional specifications.

Oil Pump UpgradeOil pump rotor, bearing and vane diameters are dimensionally inspected using precision

air gauging. Then the pumps are reassembled and functionally tested to ensure compli-

ance with Carlyle specifications for flow, oil pressure and watts.

Motor Rewind ShopStators are rewound, varnish dipped and electronically tested to specifications that meet

or exceed original UL standards to ensure the highest level of quality, performance

and reliability.

Quality AuditorEach work day, a full-time auditor inspects five randomly selected finished compressors.

Compressor AssemblyIn the final operation, the highly experienced technicians carefully assemble the remanu-

factured compressor. New bearings are installed, rod and pistons are connected to the

crankshaft, the stator is inserted in the crankcase and the rotor is precisely aligned into it.

Valve plates and cylinder heads are added and wiring is completed.

Compressor TestingAll remanufactured compressors are load tested to criteria that verify performance by

measuring flow, loaded amp draw and oil pressure. Each compressor undergoes

submerge as well as helium leak tests to verify the integrity of its pressure enclosure.

PaintingCompressors are painted using an electrostatic paint process that ensures even

and complete paint coverage, avoiding unsightly irregularities on the finished compressor.

Rod and Piston UpgradeRods and pistons are visually inspected for physical damage and processed to remove

minor burrs. Wrist pin holes and crankshaft bores are checked using precision air gaging to

ensure proper sizing and compliance with Carlyle dimensional specifications.

Oil Pump UpgradeOil pump rotor, bearing and vane diameters are dimensionally inspected using precision

air gauging. Then the pumps are reassembled and functionally tested to ensure compli-

ance with Carlyle specifications for flow, oil pressure and watts.

Motor Rewind ShopStators are rewound, varnish dipped and electronically tested to specifications that meet

or exceed original UL standards to ensure the highest level of quality, performance

and reliability.

Quality AuditorEach work day, a full-time auditor inspects five randomly selected finished compressors.

Compressor AssemblyIn the final operation, the highly experienced technicians carefully assemble the remanu-

factured compressor. New bearings are installed, rod and pistons are connected to the

crankshaft, the stator is inserted in the crankcase and the rotor is precisely aligned into it.

Valve plates and cylinder heads are added and wiring is completed.

Compressor TestingAll remanufactured compressors are load tested to criteria that verify performance by

measuring flow, loaded amp draw and oil pressure. Each compressor undergoes

submerge as well as helium leak tests to verify the integrity of its pressure enclosure.

PaintingCompressors are painted using an electrostatic paint process that ensures even

and complete paint coverage, avoiding unsightly irregularities on the finished compressor.

Rod and Piston UpgradeRods and pistons are visually inspected for physical damage and processed to remove

minor burrs. Wrist pin holes and crankshaft bores are checked using precision air gaging to

ensure proper sizing and compliance with Carlyle dimensional specifications.

Oil Pump UpgradeOil pump rotor, bearing and vane diameters are dimensionally inspected using precision

air gauging. Then the pumps are reassembled and functionally tested to ensure compli-

ance with Carlyle specifications for flow, oil pressure and watts.

Motor Rewind ShopStators are rewound, varnish dipped and electronically tested to specifications that meet

or exceed original UL standards to ensure the highest level of quality, performance

and reliability.

Quality AuditorEach work day, a full-time auditor inspects five randomly selected finished compressors.

Compressor AssemblyIn the final operation, the highly experienced technicians carefully assemble the remanu-

factured compressor. New bearings are installed, rod and pistons are connected to the

crankshaft, the stator is inserted in the crankcase and the rotor is precisely aligned into it.

Valve plates and cylinder heads are added and wiring is completed.

Compressor TestingAll remanufactured compressors are load tested to criteria that verify performance by

measuring flow, loaded amp draw and oil pressure. Each compressor undergoes

submerge as well as helium leak tests to verify the integrity of its pressure enclosure.

PaintingCompressors are painted using an electrostatic paint process that ensures even

and complete paint coverage, avoiding unsightly irregularities on the finished compressor.

rod and piston upgrade Rods and pistons are visually inspected for physical damage and processed to remove minor burrs. Wrist pin holes and crankshaft bores are checked using precision air gauging to ensure proper sizing and compliance with Carlyle dimensional specifications.

oil pump upgrade Oil pump rotor, bearing and vane diameters are dimensionally inspected using precision air gauging. Then the pumps are reassembled and functionally tested to ensure compliance with Carlyle specifications for flow, oil pressure and watts.

motor rewind shop Stators are rewound, varnish dipped and electronically tested to specifications that meet or exceed original UL standards to ensure the highest level of quality, performance and reliability.

Quality auditorEach work day, a full-time auditor inspects five randomly selected finished compressors.

Compressor assemblyIn the final operation, the highly experienced technicians carefully assemble the remanufactured compressor. New bearings are installed, rod and pistons are connected to the crankshaft, the stator is inserted in the crankcase and the rotor is precisely aligned into it. Valve plates and cylinder heads are added and wiring is completed.

Page 6: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

UL Recognition—Safety And Protection For You.

What does the UL seal of approval found on the side of your Genuine

Carlyle Remanufactured Compressor mean for you? It means that every

remanufactured compressor has been built to comply with internationally

recognized safety standards, minimizing risk of fire, electric shock or other

hazards.

UL recognition is only granted following the most thorough investigation

and testing.

■ Calibration dates are verified for all electrical and pressure test equipment.

■ Annual hydrostatic pressure testing of crankcases and cylinder heads—

5 times the normal factory test specification—is conducted to protect

against bursting under the most strenuous operating conditions.

■ Wiring diagram and electrical installation instructions are verified.

■ UL verifies that the electrical enclosures are protected against corrosion.

■ Motors are thoroughly inspected to make sure winding insulation is

acceptable for the application voltages, temperatures encountered and oil

and refrigerant compatibility.

■ Field-wiring connections provided on the compressor for power supply,

control wiring or equipment grounding are proven to meet the appropriate

electrical codes.

UL also conducts ongoing, unannounced audits at our Stone Mountain, GA,

facility four times a year. This ensures that each and every Genuine Carlyle

Remanufactured Compressor meets everyone’s standard of quality. Theirs.

Ours—and most importantly, yours.

Think Safety.Don’t take the risk of using a non-UL recognized compressor. This could

result in the violation of local or state electrical codes and invalidate the

original UL listing for the entire air conditioning or refrigeration system.

ul reCoGnition—safety and proteCtion for you.

What does the UL seal of approval found on the side of your Genuine Carlyle Remanufactured Compressor mean for you? It means that every remanufactured compressor has been built to comply with internationally recognized safety standards, minimizing risk of fire, electric shock or other hazards.

UL recognition is only granted following the most thorough investigation and testing.

• Calibration dates are verified for all electrical and pressure testequipment.

• Annual hydrostatic pressure testing of crankcases and cylinder heads –5 times the normal factory test specification - is conducted to protect against bursting under the most strenuous operating conditions.

• Wiring diagram and electrical installation instructions are verified.

• UL verifies that the electrical enclosures are protected against corrosion.

• Motors are thoroughly inspected to make sure winding insulation is acceptable for the application voltages, temperatures encountered and oil and refrigerant compatibility.

• Field-wiring connections provided on the compressor for power supply, control wiring or equipment grounding are proven to meet the appropriate electrical codes.

UL also conducts ongoing, unannounced audits at our Stone Mountain, GA, facility four times a year. This ensures that each and every Genuine Carlyle Remanufactured Compressor meets everyone’s standard of quality. Theirs. Ours – and most importantly, yours.

think safety.Don’t take the risk of using a non-UL recognized compressor. This could result in the violation of local or state electrical codes and invalidate the original UL listing for the entire air conditioning or refrigeration system.

For more information about genuine Carlyle remanufactured compressors, or tofind a distributor in your area, please visit us online at www.carlylecompressor.com.

Page 7: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

HoW Carlyle remans matCH up.

For more information about genuine Carlyle remanufactured compressors, or to find a distributor in your area, please visit us online at www.carlylecompressor.com.

UL recognized? ?

Completely remanufactured to current OEM specifications? No

Use of latest design specifications and genuine parts? No

Replace all critical-wearing components? ?

Cylinder walls rehoned, crankshaft remachined and polished? No

Cylinder and rod bores measured with highly sensitive air gauge? No

Product quality audited daily? No

All compressors are 100% run-tested under load? ?

Backed by Carlyle Compressor service No and warranty programs?* *Depending on model and A/C application. See your Carlyle distributor for complete details.

Carlyle others

up to 2 year*

Warranty

Page 8: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

574-921 Rev. 0716

Carlyle Compressor | P.O. Box 4808 | Syracuse, NY 13221 www.carlylecompressor.com | 1-800-Go-Carlyle

Build your reputation on our reliability.TM

Genuine Carlyle remanufaCtured Compressor model families

06d Semi-hermetic

3 - 15 nominal HP

8 - 41 nominal CFM

06e Semi-hermetic

15 - 40 nominal HP

50 - 99 nominal CFM

05f Open-drive

5 - 25 nominal HP

20 - 60 nominal CFM

Open-drive

25 - 150 nominal HP

05H

90 - 346 nominal CFM

Page 9: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

When is a carlyle® not a carlyle?

570-736 Rev. 0716

the UnaUthorized rebUilt compressor• May not be UL

recognized

• Repaired or partiallyrebuilt to whatspecifications?

• Components reusedor replaced?

• Critical parts replacedwith parts that meetwhat standard?

• Any run testingperformed?

• No warrantyassurance fromCarrier Corporation

the genUine carlyle Factory remanUFactUred compressor• UL recognized

• Completely remanufactured to current OEM specifications at CarlyleStone Mountain Remanufacturing facility, utilizing genuine parts.

• All critical wearing components, rings, valves, and bearings replaced

• Cylinder walls rehoned, crankshaft remachined and polished to ensurereliable performance

• Bores measured with highly sensitive air gauge

• Product quality routinely audited by Carlyle factory personnel

• All compressors are 100% run tested, under load

• Backed by Carrier Corporation service and warranty programs

For more inFormation aboUt genUine carlyle remanUFactUred compressors, or to Find a distribUtor in yoUr area,

please visit Us online at WWW.carlylecompressor.com

WheN It’s AN UNAUthoRIzed RebUILd!available at yoUr

aUthorized carlyledistribUtor

Manufacturer reserves the right to discontinue, orchange at any time, specifications or designs and prices without notice and without incurring obligations.

carlyle compressor | P.O. Box 4808 | Syracuse, NY 13221 www.carlylecompressor.com | 1-800-Go-Carlyle

Build your reputation on our reliability.TM

Page 10: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

11 9

9

3

16

10

4

9

9

17

8

5

9

12 9

4

1615

14

13 6

2

1

3

1

7

13 14 15

genUine carlyle compressors give good as neW, iF not better

than neW perFormance

speciFy a compressor With a repUtation For QUality, dependability and saFety...

genUine carlyle - protect yoUr repUtation!

remanUFactUred, not rebUilt!

critical Wearing parts hard parts

discarded and replaced with new, current oem parts

cleaned, measured, gaged, polished, and brought up to current oem specification - or scrapped.

all gaskets 9. crankcase components

1. bearings 10. & 11. rotor and stator

2. piston rings 12. crankshaft

3. & 4. suction and discharge valves 13. pistons

6. wrist pin snap rings 14. wrist pins

7. nameplate 15. connecting rods and straps

8. electrical connections 16. valve plates

17. pump-end bearing head

UL recognized? ?

Completely remanufactured to current OEM specifications? No

Use of latest design specifications and genuine parts? No

Replace all critical-wearing components? ?

Cylinder walls rehoned, crankshaft remachined and polished? ?

Cylinder and rod bores measured with highly sensitive air gauge? ?

Product quality audited daily? ?

All compressors are 100% run-tested under load? ?

Backed by Carlyle Compressor service No and warranty programs? * Depending on model and A/C application. See your Carlyle distributor for complete details.

carlyle others

Up to 2 year*

Warranty

Page 11: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

11 9

9

3

16

10

4

9

9

17

8

5

9

12 9

4

1615

14

13 6

2

1

3

1

7

13 14 15

genUine carlyle compressors give good as neW, iF not better

than neW perFormance

speciFy a compressor With a repUtation For QUality, dependability and saFety...

genUine carlyle - protect yoUr repUtation!

remanUFactUred, not rebUilt!

critical Wearing parts hard parts

discarded and replaced with new, current oem parts

cleaned, measured, gaged, polished, and brought up to current oem specification - or scrapped.

all gaskets 9. crankcase components

1. bearings 10. & 11. rotor and stator

2. piston rings 12. crankshaft

3. & 4. suction and discharge valves 13. pistons

6. wrist pin snap rings 14. wrist pins

7. nameplate 15. connecting rods and straps

8. electrical connections 16. valve plates

17. pump-end bearing head

UL recognized? ?

Completely remanufactured to current OEM specifications? No

Use of latest design specifications and genuine parts? No

Replace all critical-wearing components? ?

Cylinder walls rehoned, crankshaft remachined and polished? ?

Cylinder and rod bores measured with highly sensitive air gauge? ?

Product quality audited daily? ?

All compressors are 100% run-tested under load? ?

Backed by Carlyle Compressor service No and warranty programs? * Depending on model and A/C application. See your Carlyle distributor for complete details.

carlyle others

Up to 2 year*

Warranty

Page 12: Build your reputation on our reliaBilityahi-carrier.gr/en/wp-content/uploads/sites/2/2018/... · you sHould Build Your reputation on. Carlyle. If It Doesn’t SayGenuine Carlyle Remanufactured

When is a carlyle® not a carlyle?

570-736 Rev. 0716

the UnaUthorized rebUilt compressor• May not be UL

recognized

• Repaired or partially rebuilt to what specifications?

• Components reused or replaced?

• Critical parts replaced with parts that meet what standard?

• Any run testing performed?

• No warranty assurance from Carrier Corporation

the genUine carlyle Factory remanUFactUred compressor• UL recognized

• Completely remanufactured to current OEM specifications at Carlyle Stone Mountain Remanufacturing facility, utilizing genuine parts.

• All critical wearing components, rings, valves, and bearings replaced

• Cylinder walls rehoned, crankshaft remachined and polished to ensure reliable performance

• Bores measured with highly sensitive air gauge

• Product quality routinely audited by Carlyle factory personnel

• All compressors are 100% run tested, under load

• Backed by Carrier Corporation service and warranty programs

For more inFormation aboUt genUine carlyle remanUFactUred compressors, or to Find a distribUtor in yoUr area,

please visit Us online at WWW.carlylecompressor.com

WheN It’s AN UNAUthoRIzed RebUILd!available at yoUr

aUthorized carlyle distribUtor

Manufacturer reserves the right to discontinue, orchange at any time, specifications or designs and prices without notice and without incurring obligations.

carlyle compressor | P.O. Box 4808 | Syracuse, NY 13221 www.carlylecompressor.com | 1-800-Go-Carlyle

Build your reputation on our reliability.TM