building automation / home automation with touch screen controllers
DESCRIPTION
Transcript 1. Today’s webinar will be on Building Automation Systems. I am Maria Lemone our Sales Manager and I also have Robert here from our Technical Support department. I am going to introduce building automation systems and Robert will show an online demonstration of a Building Automation application with Indusoft SCADA Software later in our webinar. If you have any questions please type them into the chat box and we will answer them at the end of the meeting. 2. You may want to tie different operations together into one central control and monitoring system within a building. A Building controlled by a Building Automation System is often referred to as a smart building. You may want the Heating, Ventilation and Air Conditioning System to turn on and off based on temperature conditions during certain time periods. To save energy, you may want lighting to be triggered by motion sensors and to keep logs of lighting usage. You may want to control and monitor the status of elevators. Sprinkler and fire protection can help prevent building damage and can help to alert fire protection services about fires. Access control systems can ensure only proper personnel can enter restricted areas. 3. Here is an example of a small building automation system. The IR-310-RM in the center on the left is a 10 channel high powered relay module that is designed for controlling the power of devices. The relay module can switch up to 10 Amp loads. There are normally open / normally closed switches and protection circuits for each channel. The relays can be controlled independently or sequentially by serial communication over Modbus RTU protocol, as well as through wireless Infrared remote control. A control program in a Programmable Automation controller or touch screen controller can be used to automate various equipment. The touch screen interface can be used to turn the equipment off and on through the IR-210 IR learning remote module which can store up to 176 IR commands. A web server in the WP-8441 and a Wi-Fi route can be used to publish the application to a web page which could allow for a smart phone to control various equipment. Industrial building automation systems may include boiler controllers, package control units, VAV Variable air volume boxes, PLC’s, lighting controllers, BACnet and LonTalk devices. A primary bus is often used for higher level controllers or programmable logic controllers and secondary buses may be used for input and output devices and user interfaces. Open standard Zigbee wireless mesh networks are often used in building automation systems. Building Automation SCADA systems can show the status of small or large systems on computer screens. 4. WP-8441 is a WinPAC Programmable Automation Controller with a Windows CE.NET 5.0 Operating System. It has 4 I/O slots for cartridge based I/O or communication modules. WP-8441 can run multiple programs at one time and can also be used foTRANSCRIPT
Building Automation Systems
Heating Ventilation Air conditioning Drainage Power
Lighting Elevators Fire protection Security Garage management
Building Lighting
tPET-P2R2 Tiny Ethernet module with PoE
Providing various digital I/O functions, the tET/tPET series is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP protocol.
Features:• Cost-effective Ethernet I/O modules (Modbus
TCP/UDP slave)• Contains a 32-bit MCU that efficiently
handles network traffic• 10/100 Base-TX Ethernet, RJ-45 x1 (Auto-
negotiating, Auto MDI/MDIX, LED Indicator)• Supports TCP, UDP, HTTP, DHCP, BOOTP
and TFTP protocols• Supports UDP responder for device
discovery• Supports web configuration and firmware
update via Ethernet
I-7044D Data Acquisition Module
• Provide signal conditioning system monitoring and safe value settings.
• The DCON utility can help users to configure and test I-7044D.
• Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems.
• Users may mount the modules on a DIN rail, panel or wall.
• 4 Channel Isolated Digital Input• 8 Channel Isolated Digital Output• Communicable over RS-485
RM-104 Power Relay Module
• RM series power relay modules can be mounted on different DIN rail, such as TS-15, TS-32 or TS-35.
• Every channel of RM-104, RM-108, and RM-116 contains 1 Form C relay.
• The reverse polarity protection is provided to prevent improper operation.
• 4-channel relays, 8-channel relays and 16-channel relays
TPD-283/U
Compact Touch Screen PLC Controller with high resolution 2.8" TFT color touch screen which fits in regular electrical wall-mount outlets, and is Powered over Ethernet.
Features:• A tiny touch screen controller HMI
designed for building and home automation.
• Equipped with a high resolution TFT color touch screen
• Fits in regular electrical wall-mount outlets
• Excellent C/P ratio (cost/performance)• High resolution color touch screen• PoE, Power over Ethernet• Free development tool, HMIWorks
TPD-430
• 4.3" Touch Screen PLC with RS-485 and USB ports
• Real Time Clock and fits in regular electrical wall mount outlets
• Free HMIWorks C Language and Ladder Logic Programming and GUI Development Environment
Features:• Excellent C/P ratio
(cost/performance)• High-resolution color touch screen• RS-485 (including Self-Tuner)• RTC (Real Time Clock)• Speaker• WYSIWYG (What You See Is What
You Get) GUI design
Building Supply & Distribution
• RS-485 communication• Modbus RTU protocol • CAN Bus Communication• Compatible with CAN
specification 2.0B.
• 3.5” Touch HMI device• RS-232/RS-485 port• USB port• Real Time Clock and DIN
Rail Mount
VPD-130
Temperature & Humidity
• Temperature and Humidity Data Logger
• RS-485 communication interface• Supports operating temperatures
from -20 ~ +60°C• LCD display• The data storage memory can
store up to 4088 temperature and humidity records.
DL-100T485
Air Conditioning & Ventilation
IR-210• Universal IR learning
remote module• 6 IR output channels
Smart Home
Safer Wiser Energy-saving
Home Automation
Smart Home
One touch turns everything off
Smart Home
Energy Efficiency
Home Automation
For more information, please visit www.icpdas-usa.com