1

Building Envelope Installation Checklist Product type being installed: (Air Barrier, Below Grade Waterproofing, etc.) Spec Section (if applicable): Specified Material Names: Materials approved by: Details approved by: Date Approved: Quantity takeoff done? q By: Quantities Double-checked: q By:

Component 1 Name: Qty: Detailing Components: Qty: Component 2 Name: Qty: Detailing Components: Qty: Component 3 Name: Qty: Detailing Components: Qty: Installation dates: Installed by: Supervised by: Installation Completion date: Date covered-up (if UV sensitive):

Any Issues / Re-work Areas to disclose:

Please attach progress and / or completion photos here:

Pricing Errors and/or Omissions: HD Supply Construction & Industrial strives to give you accurate content, including product information, policies, pricing, and visual displays. Policies, pricing, and item availability are subject to change without notice, and HD Supply Construction & Industrial reserves the right to limit quantities. It is acknowledged that the pricing in this publication does not reflect HD Supply Construction & Industrial’s pricing in Hawaii. Prices displayed are subject to final approval at the time of order fulfillment. Images are shown for representational purposes only. In the event HD Supply Construction & Industrial is unable to provide an actual image of a product, it reserves the right to substitute a similar image for the one described in the product information. While HD Supply Construction & Industrial tries in good faith to make sure that the information displayed is accurate, it is not responsible for typographical errors or technical inaccuracies. This disclaimer in no way affects the terms of the manufacturer’s warranty, if any. All products not in all stores.

2

C H O O S I N G T H E R I G H TWATERPROOFING

MEMBRANEMEMBRANE

oday’s designers achieve moisture control and energy e� ciency using an integrated construction approach. They specify materials and details for building envelopes that make it easy to monitor climate and health conditions by separating conditioned from non-conditioned spaces.

Waterproofi ng membranes make that separation possible. These thin layers of material keep water from contacting the material they cover. As performance requirements for building envelopes have become more demanding, waterproofi ng membranes have evolved into engineered materials that keep all moisture out of a conditioned area.

Contractors can now choose from many more options than ever before when matching a waterproofi ng membrane to jobsite conditions and building performance requirements. The membranes are made from a variety of materials in many sizes and thicknesses and can be applied in a number of ways.

Is it exposed to sunlight? Choose UV-stable or UV-resistant materials to prevent degradation.

Will it be applied to a fl exible surface? High-rises and steel buildings fl ex by design, so membranes applied to them must stretch with the building to cover cracks that might occur. Refer to the product’s elongation – an elongation of 150% indicates the membrane can stretch 1.5 times its length when pulled.

Does the building need a breathable membrane? If water does enter and spread across a surface, it needs a way out. Breathable membranes help release it in the form of water vapor.

How durable does it need to be? Membrane materials are rated for resistance to tearing and abrasion. Many that have good elongation properties tear easily during application. Choose one with abrasion resistance if work might be done on membrane before its fi nal coating.

Could it potentially be exposed to chemicals? Membrane below-grade could be exposed to sulfates from soil. Check manufacturer instruction about chemical exposure.

Will it be installed over complicated shapes? Liquid membranes are better for complex shapes and structures. Sheet membrane may be better for smooth, straight surfaces.

The general suggestions above o� er some help with selecting the correct waterproofi ng membrane, but you’ll fi nd more things to consider in this catalog that are applicable to most installations:

Fluid Applied Waterproofi ng p.3 Sheet Waterproofi ng Membrane p.3Air and Vapor Barrier p.4 Sealants for waterproofi ng applications p.5

Fluid Applied Waterproofi ng p.3 Sheet Waterproofi ng Membrane p.3Air and Vapor Barrier p.4 Sealants for waterproofi ng applications p.5

317

BELOW-GRADE WATERPROOFING

Call your local White Cap branch for project pricing

WATERPROOFINGFLUID-APPLIED

WHAT ARE THE BENEFITS?

luid-applied membranes deliver excellent waterproofing properties including hardness, tensile strength, tear strength and elongation. There are four main contractor-friendly benefits when compared with sheet waterproofing membranes:Faster Installation: Formulations have quick-curing primers. And you can typically apply spray fluid-applied membranes faster than sheet membranes because there’s no sheets to cut. Improved Built Quality: Installers can coat the entire surface with a continuous membrane that leaves no open seams at joints. As the structure settles or moves, the fluid-applied membrane moves with its host substrate.Project Versatility: By conforming to shapes, fish mouths or voids are eliminated on complex structures. Easy To Detail: Miscommunication between contractors and architects when waterproofing difficult details on complex structures is lessened.The most knowledgeable pros in construction supplies.™

WATERPROOFINGSHEET-APPLIED

SHEET-APPLIED MEMBRANES:

heet waterproofing membranes are factory produced and delivered to the jobsite ready to install. Manufacturers offer a wide range of types. These sheets consist of bentonite clay, modified bitumen, rubber, polyethylene, polypropylene, ethylenepropylenediene monomer (EPDM), reinforced polymers and other rubber and plastic sheet compositions. There are two common types of waterproofing sheet membranes:Self-Adhering: Also known as “peel and stick” membranes – one side is adhesive that’s applied to the concrete surface.Non-Adhesive: Non-adhesive sheet membranes attach to the concrete surface with straps, anchors, plastic welding or fasteners.

Are manufactured to a uniform thickness and have good elongation.Are applied after a concrete curing time of seven days and at temperatures as low as 25° F. Bridge pre-existing cracks up to .0625" wide.Withstand typical surface movements under a wide range of temperatures and environmental conditions.Resist punctures and high hydrostatic pressures.Withstand chemicals from soil acids alkalis and fungi.Allow backfilling immediately after membrane application.

TIPS FOR PROPER INSTALLATION

Keep the concrete bonding surface clean and free from significant surface defects and dirt.Position lap joints so they are tight according to the manufacturer’s instruction details. Use only the manufacturer’s recommended mastic and anchoring accessories.

17

418 718.937.5490The most knowledgeable pros in construction supplies.™18

AIR BARRIER

You’ll be installing it, so be sure you know the basics.

Engineers frequently specify a building’s air barrier early in their design process. But you’ll still have influence on their final decision because you’re responsible for the barrier’s proper installation. That’s why it’s important to understand the basics and options on this important construction detail.

What is an air barrier?An air barrier system is a collection of membranes placed on exterior exposures to create a seamless building envelope. It eliminates uncontrolled air leakage in and out of structures. This restriction improves control of temperature, moisture, air quality and humidity in the building.

What are the two air barrier types?The two kinds of air barriers both provide similar results, and are often used together to enhance effectiveness. Interior air barriers control air leakage from the building’s interior into the wall cavity. They’re effective in limiting convection losses within walls during the heating season. Exterior air barriers control infiltration of exterior air into the wall cavity. They’re effective in limiting moist outdoor air from entering during the cooling season, and prevent wind-washing of wall insulation.

Is permeable or impermeable needed?Vapor permeable air barriers allow moisture vapor to pass through the membrane, promoting diffusion. They’re either sheet membranes or fluid-applied and offer varying rates of permeability. Vapor impermeable air barriers block moisture vapor and air. They can be either self-adhering sheet membranes or can be fluid-applied membranes. Engineers determine whether to use a vapor permeable or vapor impermeable air barrier (and how to use it) based on two key factors: the climate where the wall is located, and the wall design including where the air barrier and insulation layer are in relation to each other in the wall.

Why create an airtight building?Restricting air movement through an untreated wall assembly is a cost-effective investment. The National Institute of Science and Technology estimates the right air barrier can improve a building’s performance by reducing heating and cooling costs by as much as 36 percent for a typical initial investment of less than 1-2 percent of the of the building’s cost. Air barriers also help designers keep up with changing building code requirements. And they’re often referenced in their efforts to achieve recognition in the U.S. Green Building Council’s Leadership in Energy and Environmental Design rating system. Air barriers also minimize condensation in wall systems that can cause steel reinforcement corrosion, mold and loss of insulation value.

5718.937.5490The most knowledgeable pros in construction supplies.™

Here are some basic things to consider.

Joint sealants keep water out of joints. They’re designed to expand and contract with the joint to form a durable seal. The sealant and its tight fit in the joint is designed to remain functional for a specified time period. Always make sure the sealant’s service life matches the expected life of the structure.

What are the joint categories?Joint sealants fall into two categories: field-molded and preformed.

Field-molded sealants are applied in liquid or semiliquid form. As they cure, the materials take on the required shape of the joint opening. Field-molded sealants are relatively soft and flexible materials, typically polyurethane, silicone, or acrylic. These special formulations cycle between compression and tension and change their shape without changing their volume.

Preformed sealants are preshaped solid forms. Examples of preformed sealants include rigid waterstops, flexible waterstops, gaskets, gland seals, compression seals, and flexible foam (impregnated and nonimpregnated). Installers push the materials into open joint and change their shape as their width changes.

How should your sealant perform?Most importantly, it should be an impermeable material. It should also have the capability to deform to accommodate movement and rate of movement occurring at the joint – while retaining its original properties and shape if subjected to cyclical deformations. And when being applied to concrete it should form a bond with the concrete surfaces.

Does the weather affect your sealant?Be aware of conditions when applying sealants. In cold temperatures, the cure rate may be slower, but they will ultimately cure to the same physical properties as they do when applied in warmer temperatures. In very hot weather a sealant’s tooling time will be reduced due to dry surfaces accelerating curing.

CHOOSINGASEAEAE LANTLANTL

2828

629

SEALANTS

MASTERSEAL®

NP1™ SEALANT One-componentelastomeric, gun-grade polyurethane sealant ■ Joint movementcapability ± 35%

■ Bonds to most construction materials without a primer

■ Weather resistant

MASTERSEAL® SL 1™ One-component, self-leveling,non-priming polyurethane sealant ■ Designed for expansion joints inconcrete floors and decks

■ Use where flexibility as well as abrasionand puncture resistance are required

■ Movement capability of ±25% ■ Abrasion resistant – longer wearing■ Expands and contracts withjoint movement

■ Installs quickly, has excellent adhesion

MASTERSEAL® NP 100 High-performance, low modulus, high movement, non-sag, fast-curing and ready-to-use hybrid sealant ■ Superior adhesion to a varietyof substrates for long term bond

■ Formulated for joint movementof +/- 50%

MASTERSEAL® SL 2™ Multi-component self-leveling, elastomeric polyurethane sealant ■ Forms a tough, resilient joint seal thatresists penetration and abrasion

■ Remains flexible when exposed to weather and aging

■ Wide temperature-application range

■ Long pot life for extended work time

MASTERSEAL® NP 2 POLYURETHANE SEALANT Strong, primerless adhesion to the broadest range of substrates ■ Long pot life for extendedworking time

■ Chemical cure for faster turnaround time

■ Easy-to-gun and tool to speed up application and make neater joints

Get It Done with MasterSeal® NP 1™ SealantNot all sealants are created equal. To solve project challenges, sealants must be able to adhere, move and last year after year, when exposed to extreme weather elements. MasterSeal NP 1 has a proven track record of successful installations by keeping joints weathertight for more than 40 years.

® = Registered trademark of the BASF-Group in many countries. © 2018 BASF Corporation

OTHER COLORS AVAILABLE

OTHER COLORS AVAILABLEOTHER COLORS AVAILABLE

OTHER COLORS AVAILABLE

PRODUCT NO. SIZE COLOR PRICE 279NP1G 10 OZ GRAY $6.49 279NP1B 10 OZ BLACK $6.49 279NP1SB 10 OZ BRONZE $6.49 279NP1L 10 OZ LIMESTONE $6.49 279NP1MB 10 OZ MEDIUM BRONZE $6.49 279NP1OW 10 OZ OFF WHITE $6.49 279NP1RT 10 OZ REDWOOD TAN $6.49 279NP1300S 10 OZ STONE $6.49 2791025617 10 OZ TAN $6.49 279NP1300W 10 OZ WHITE $6.49 279NP120AG 20 OZ ALUMINUM GRAY $8.79 279NP120BLK 20 OZ BLACK $8.79 2791027761 20 OZ BRONZE $8.79 279NP120LS 20 OZ LIMESTONE $8.79 2791027794 20 OZ MEDIUM BRONZE $8.79 279NP120OW 20 OZ OFF WHITE $8.79 279NP120RT 20 OZ RED $8.79 2791027762 20 OZ STONE $8.79 279NP120T 20 OZ TAN $8.79 279NP120W 20 OZ WHITE $8.79

PRODUCT NO. SIZE COLOR PRICE 279SL129G 29 OZ GRAY $17.09 2791004941 29 OZ LIMESTONE $17.09

PRODUCT NO. SIZE COLOR PRICE 279SL2JS 1.5 GAL NEUTRAL $44.39 27940872023 1.5 GAL LIMESTONE $44.39

PRODUCT NO. SIZE COLOR PRICE 27950363260 300 ML. MED. BRONZE $7.79 27950387017 300 ML. SPEC. BRONZE $7.79 27950363508 300 ML. WHITE $7.79 27950391396 20 OZ. WHITE $11.49

PRODUCT NO. SIZE COLOR PRICE 279NP2 1.5 GAL NEUTRAL $44.39 22050270577 1.5 GAL LIMESTONE $44.39

29Call your local White Cap branch for project pricing

7The most knowledgeable pros in construction supplies.™3636 718.937.5490

Sign up now for Order Status Updates and notifi cations will automatically be sent to your email. Ask your Account Manager,

Sales Associate or head online to Whitecap.com/OrderStatus and take advantage of this great new tool.

THE MOST KNOWLEDGEABLE PROSIN CONSTRUCTION SUPPLIES SM

Get more out ofWHITECAP.COM

Apply for credit online!

Manage your account

Create a project list

Get order status updates

Receive paperless invoices

Get project-specifi c pricing

863

EPOXIES & INJECTION

Call your local White Cap branch for project pricing

SIKAGARD® 62 Two-component, 100% solids, moisture-tolerant epoxy resin

■ Produceshigh-build,protective,dampproofingandwaterproofingvapor-barriersystem

■ Exceptionaltensilestrength ■ Goodchemicalresistanceforlong-termprotection

■ Convenient1:1mixingratio

■ Excellentbondingtoallcommonstructuralsubstrates

SIKADUR® 35 HI-MOD LV Two-component, 100% solids, moisture-tolerant, low viscosity, high-strength multipurpose epoxy resin adhesive

■ Convenienteasymixratio2:1byvolume ■ Deeppenetratingandtenaciousbondingofcracksinstructuralconcrete

■ Highearly-strengthdevelopingadhesive

■ ConformstocurrentASTMC881,TypesI,II,andIV,Grade1,ClassCandAASHTOM-235specifications

SIKADUR® 55-SLV Super-low viscosity, moisture-tolerant epoxy resin, crack healer/penetrating sealer

■ Opentotrafficin6hoursat73°F ■ Penetratescracksbygravitydownto2mils ■ Structurallyimprovesconcretesurface ■ Superlowviscosity/lowsurfacetensionforexcellentpenetrationintocracks

■ High-bondstrength

SIKADUR® 52 Two-component, 100% solids, moisture-tolerant, low-viscosity, high-strength, epoxy adhesive

■ Formulatedspecificallyforgroutingdryanddampcracks

■ High-strengthadhesivefor“can’tdry”cracks ■ Sealinteriorslabsandexteriorabovegradeslabsfromwater,chloridesandmildchemicalattack

ConformstocurrentASTM penetrationintocracks

SIKA® ANCHORFIX® 3001 High performance, two-component adhesive anchor system used in cracked and uncracked concrete

■ Usedtofixclosetofreeedges ■ Versatilerangeofembedmentdepths

■ Foranchoringwithoutexpansionforces

Usedtofixclosetofreeedges

SIKADUR® 32 KIT Two-component, moisture-tolerant, structural epoxy adhesive

■ Super-strengthbondingandgroutingadhesive

■ Excellentadhesiontomoststructuralmaterials

■ Extendedpotlifeandcontacttimeatelevatedtemperatures

gradeslabsfromwater,

elevatedtemperatures

PRODUCT NO. SIZE PRICE438456434 10OZ. $22.69

PRODUCT NO. DESCRIPTION SIZE PRICE

4380350780 SIKADUR35HIMODLV/LPLACOMP 2GAL. $214.79

4380350860 SIKADUR35HIMODLVBCOMP 1GAL. $109.89

PRODUCT NO. DESCRIPTION PRICE43839603 3GAL.KIT,MOISTURE-TOLERANT $457.79 4380396030 3GAL.KIT,SOLVENT-FREE $355.79

forlong-termprotection

PRODUCT NO. SIZE COLOR PRICE4380601792 2GAL GRAY $262.19

PRODUCT NO. SIZE PRICE438389050 3GAL.KIT $497.69

PRODUCT NO. SIZE PRICE43837002N 2GAL.KIT $210.7943837004 4GAL.KIT $356.59

SIKA® INJECT-215 Low viscosity, elastic polyacrylic injection resin with fast, adjustable reaction time and high flexibility for waterproofing of building structures

■ Adjustablepotlifebetween2and15minutes

■ Hydrophilicchemistryallowscuredmaterialtoswelluponcontacwithwater,providingadditionalsealproperties

■ Flexibleandsolvent-freeacrylateresin

PRODUCT NO. SIZE PRICE483556641 8GAL.KIT $588.99

SIKADUR® 32 HI-MOD LPL Multi-purpose two-component, 100% solids, moisture-tolerant, Offerslongpotlifeandcontacttimeevenat100°F

■ Tolerantofmoisturebefore,duringandaftercure

■ Excellentadhesiontomoststructuralmaterials

■ Convenient1:1mixingratiobyvolume

■ MeetscurrentASTMC881,TypesIandII,Grade2,ClassCandAASHTOM-235specifications

PRODUCT NO. DESCRIPTION PRICE

438037078N SIKADUR32HIMODLP/LPLACOMP2GAL100/PALLET $156.69

438037079N SIKADUR32HIMODBCOMP2GAL100/PALLET $158.49

Excellentadhesiontomost

SIKADUR® CRACK FIX Two-component, 100% solids, moisture-tolerant, low viscosity, high-strength, multipurpose epoxy resin adhesive

■ Fivetimesstrongerthanconcrete ■ Convenienteasy-to-usecartridgefitsstandardcaulkgun

■ Deep,penetratingandtenaciousbondingofcracksinstructuralconcrete

■ Nomess,self-feeding ■ MeetscurrentASTMC881andAASHTOM-235specifications

FivetimesstrongerthanconcreteConvenienteasy-to-usecartridge

Deep,penetratingandtenacious

PRODUCT NO. SIZE PRICE43803CF520S 10OZ. $22.39

63