building skills, enhancing employability. · equipment testing, condition monitoring, commissioning...
TRANSCRIPT
A C S R I n i t i a t i v e
Building Skills, Enhancing Employability.
Tata Power Skill Development Institute - ShahadCentre for Excellence for Power System Skills
About TPSDITata Power Company is India’s largest integrated power company with a presence across all the segments of the power sector - Generation (thermal, hydro, solar, and wind), Transmission, Distribution, Fuel Security & Logistics, and Power Trading. Tata Power has been lighting up lives in the nation for over a hundred years. In 2015, its centenary year of operations, Tata Power, true to the Tata Group philosophy of giving back to the society a significant portion of its earnings, has launched the Tata Power Skill Development Institute as a non-profit corporate social responsibility initiative under the Tata Power Community Development Trust.
TPSDI is mandated to provide modular training and certification in power sector and allied skills leading to employability and advancement. TPSDI harnesses the rich experience of Tata Power employees to bring “Power Skills for Life!” to prepare youth and others for the huge opportunities coming up in the power sector in the country. TPSDI is setting up five integrated training centers across India of which, TPSDI - Shahad is the first one.
TPSDI - Shahad
Centre for NCTVT - Cable Jointing and Lineman Trade Courses
Centre for Power System Skills
Centre for Distribution System Skills
Centre for Cable Laying and Cable Jointing Skills
Centre for Transmission and Distribution Line Skills
Centre for Solar Power Skills
Centre for Allied Electrical Skills
Located at Varap village along the Kalyan-Murbad road, a little over two kilometers from the Shahad Railway Station on the Mumbai-Kasara-Nasik rail route is TPSDI’s Centre for Excellence for Power System Skills. TPSDI - Shahad is a training centre spread across a sprawling 10-acre campus that provides the extensive space and the infrastructure needed to conduct courses across the whole range of power system skills.
workshop including unique conduit wiring practice facility
Safety, Health and Environment – facilities to train people on working at heights, Electrical safety – LOTO, PTW
Fully-equipped classrooms with HD projectors Fully-equipped computer lab
The following facilities at the center make for a complete training campus: Canteen Dormitories and hostels for trainees Guesthouse for faculty Medical emergency services and a
visiting doctor Highly secured campus environment
Power System live Receiving Station Well-equipped 22 KV electrical
switchyard 110 KV Transmission Line Towers-
Erection & Maintenance Distribution Line and Pole-mounted
Substation Erection & Maintenance Distribution System – Feeders, panels,
metering system, metering testing facility
Electrical Lab equipped with various working models of AC, DC Motors, Drives
Cable-Laying Facility-Handling cable drums, practicing laying real cables
Cable Jointing including LV, HV, & EHV, Cable Termination
Wiring-Domestic and Industrial Lab and
TPSDI - Shahad : Training Offerings
What the Course Covers Course follows the curriculum and pattern
as per Directorate General of Employment & Training (DGET) guidelines and norms
Training at Shahad goes beyond the minimum prescribed – Students are also exposed to other skills that prepare
them for multi-skilling and multi-tasking
National Council for Training in the Vocational Trades (NCTVT) - Cable & Lineman Trade
Course Outcome: NCTVT Graduates from the Shahad Center are much sought after by the Industry due to their added capabilities and exposure to realwork situations
Training Infrastructure at TPSDI - Shahad
Power System Skills
What the Course Covers Principles and practices related to
Installation, operation and maintenance of Transmission System and Equipment
Hot Spot identification using Infra-Red detector
Lightning protection, earthing, tree trimming, and other special line maintenance practices
Cable Laying Skills
Course Outcome: Successful trainees should be able to assist in cable laying for power distribution, power transmission, and other related areas
What the Course Covers Hands-on learning in cable routing,
drum mounting, cable rolling & laying, and protection
Overview of cables, types and sizes and norms for laying underground cables
Cable-related safety practices like shoring and sloping, work area protection
Safeguards to be taken related to other underground utility service items
Identification and use of tools and tackles, including inspection, upkeep and maintenance
different types of joints and terminations Hands-on learning of cable preparation,
cable jointing, termination of LV and HV cables
Understanding EHV cable jointing and termination techniques
Testing and Troubleshooting related to Cable Jointing and Termination
Differences between Indoor and Outdoor cable termination practices
Safety practices including Lock Out and Tag Out and Permit to Work procedures for cable jointing and termination
Fire Safety Procedures applicable to cable storing, jointing & termination
Identification and use of tools and tackles, including inspection, upkeep and maintenance
Cable Jointing and Termination Skills
What the Course Covers Introduction to basics of electricity, AC,
DC circuits Introduction to cables, cable types, cable
sizes Understanding cable jointing practice and
Course Outcome: Successful trainees should be able to prepare, joint, and terminate LV, HV, and EHVcables
Laying, jointing and termination of LV cables for power supply
Hands-on learning on transformers, circuit breakers, RMU, bus bar, feeders, current transformer, potential transformer and lightening arrestor, gang operating device, earthing system
Erection and maintenance of feeder pillars and sub feeders
Preventive and breakdown maintenance
Identification and use of tools and tackles, including inspection, upkeep and maintenance
Safety practices including Lock Out and Tag Out and Permit to Work procedures for electrical substation
Fire Safety procedures applicable to an electrical substation
AC, DC system, batteries and battery Chargers
Relays, meters and control panel wiring
Using GIS for distribution and connection management
Distribution System Skills
What the Course Covers Distribution System Skills Erection and maintenance of
distribution substation Maintenance of pole-mounted
substation
and Tag Out and Permit to Work procedures for electrical substation
Fire Safety procedures applicable to an electrical substation
AC, DC system, Batteries and Battery Chargers
Relays, meters and control panel wiring
Installation and maintenance of compressor, motor and DG set
Equipment testing, condition monitoring, commissioning procedures and calibration
Remote operation of power system using SCADA
Legal regulations and statutory compliance
Operation and maintenance practices related to grid - substation, GIS and AIS
Hands-on learning on transformers, circuit breakers, bus bar, feeders, current transformer, potential transformer, wave trap and lightning arrestor, gang operating device, earthing system
Energy Meters - single and three phase. Capacitors and reactors installation
and maintenance Preventive and breakdown
Maintenance Practices Identification and use of tools and
tackles, including inspection, upkeep and maintenance
Safety practices including Lock Out
Course Outcome: Successful trainees should be able to work as a power system electrician in an electrical substation
cross arm, insulators, line hardware, and bracing
Different types of conductors, their uses, stringing, tensioning and importance of correct sagging, conductor mid-span jointing
Different types of insulators, erection and maintenance
Lightning arrestor, grounding, guard wiring, and guy wiring/pole
Problems and conditions rendering towers, poles and accessories in need of maintenance or replacement
Hands-on learning on usage of derrick for pole erection
Erection of pole-mounted substation, Tower and pole climbing and
protection practice Tree pruning and periodic
maintenance procedures Identification and use of tools and
tackles, including inspection, upkeep and maintenance
Transmission line patrolling, identification of faults, and rectification
Hot spot identification using infra-red detector
Troubleshooting and rectification Legal regulations and statutory
compliance
Transmission and Distribution Line Skills
What the Course Covers Understanding Transmission &
Distribution System planning including estimation of material required
Erection and maintenance of transmission towers, distribution poles, and transmission & distribution lines
Accessories for tower and poles like
Distribution energy meters, types and uses
Installation and maintenance of single phase and three phase energy meters
Meter reading, AMR, meter defects and fault / tampering detection
Troubleshooting and rectification
Load calculation and load balancing and management
Energy meter testing and commissioning
Equipment testing, commissioning, condition monitoring and calibration
Legal regulations and statutory compliance
Course Outcome: Successful trainees should be able to work as a Transmission and Distribution linemen
Course Outcome: Successful trainees should be able to work as a Distribution system electrician in an electrical substation
Installation, repair and maintenance of geysers, fans, iron and other modern appliances
Installation and connection of electrical protections like fuse, RCCB, MCB, earthing system etc.
Installation, repair and maintenance of distribution transformer, switch gear, feeder pillar and distribution boards, AC, DC drives, motors, pumps, contactors and starters
Installation and maintenance of battery, battery chargers, invertors and UPS
Installation and wiring of single-phase and three-phase energy meters
Testing and trouble shooting Safety practices including lock out and
tag out and permit to work procedures for cable jointing and termination
Fire safety procedures applicable to cable storing, jointing & termination
Identification and use of right tools and tackles including inspection, upkeep and maintenance
What the Course Covers Basics of electricity, AC and DC Circuits Types of conductors, sizes and usage Wiring principles and methods,
drawing and using electric circuits for various kinds of house and industrial uses like power, lighting, appliances etc.
Laying of single phase and three phase electric circuits
Hands-on learning of various types of conducts, casing and capping, concealed wiring etc.
Hands-on learning on mounting and dismounting of various electrical accessories and fixtures and connection - switches lights etc.
Laying circuits for telecommunication, cable TV, CCTV, fire alarm system etc.
What the Course Covers Solar PV cells and its uses Installation and maintenance of solar
panels for off-grid and grid connection Installation and maintenance of solar
thermal panels for domestic and industrial heating
Installation and maintenance of domestic solar lighting system
Solar Power Skills - Photovoltaic and Thermal
Allied Skills - Wireman
Course Outcome: Successful trainees should be able to work as a Solar technician for either photovoltaic or thermal
Course Outcome: Successful trainees should be able to work as a domestic wireman
Contact TPSDIMaj. Shashi TiwariTata Power Skill Development InstituteThe Tata Power Company Limited, Parel Receiving Station, Parel Tank Road, Mumbai 400 033, Maharashtra, IndiaTel: 67172176 extn: 2176 Mobile: 0982717704Email: [email protected]
Mr. Hari RohraTata Power Skill Development Institute - ShahadC/O Tata Power Ambernath Receiving Station, Varap Village, Kalyan-Murbad Road, Next to Sacred Heart School,Shahad 421301, Maharashtra, IndiaTel: 67174717 extn: 4717 Mobile: 09223582855Email: [email protected]
T P S D I - ( 2 ) 2 0 1 5
TPSDI Shahad Layout
1. Admin Office2. Classroom 1&23. Cable Workshop4. Switchyard5. Distribution Lab6. Lab Block
7. Canteen8. Solar Thermal 12. Hostel Block13. Auditorium14. Workshop15. Electrical Exibits
9 -