BULLET RESISTANT DOORS AND WINDOWS

BULLET / BLAST RESISTANT FIBERGLASS COMPOSITE PANELS

BLAST RESISTANT DOORS AND WINDOWS

800-880-8306 • FAX 210-661-8308 • WWW.ARMORTEX.COM

FOR COMPLETE INFORMATION AND DETAILS ON ALL BULLET/BLAST PROTECTION PRODUCTS WE OFFER PLEASE VISIT

WWW.ARMORTEX.COM OR WWW.FRAGSTOP.COM

R

ARMORTEX® PRODUCTS CARRY 5 MILLION DOLLARS OF PRODUCT LIABILITY INSURANCE

13 40 00.11/ARMBuyLine 4484

4484_01.indd 14484_01.indd 1 9/9/08 12:06:56 PM9/9/08 12:06:56 PM

Armortex®, the manufacturer of Armortex® composite fiberglass panels, manufactures UL Listed bullet resistant products. This composite material is made using woven roving ballistic grade fiber. We weave the cloth in-house where it is mechanically injected with a thermoset resin and placed in a hydraulic hot press, then pressed into flat rigid sheets available in 3’ or 4’ widths and lengths of 8’ or 9’. 10’ lengths are available on request. By using a ballistic grade fiber in our cloth, we can maximize our ballistic performances by consistently achieving a uniform resin-to-fiber ratio. This allows the proper de-lamination to encapture projectiles.

Excessive resin left behind in the manufacutring process results in a thicker, less safe product. By using the correct amount of pressure and heat during our curing process, excessive resin is eliminated from Armortex® Bullet Resistant Composite Fiberglass, always resulting in a product that provides the maximum amount of protection. Our Armortex® Bullet Resistant Composite Panels are approved by the U. S. Marshal Service, the General Services Administration, and complies with NIJ standards.

FS-3, one of Armortex®’s Frag-Stop Composites, is specifically designed, manufactured and certified to give a measured protection against shrapnel damage from blasts, as well as affording protection against simultaneous, multiple handgun attacks. Certified by the Southwest Research Institute using MIL-STD-622F (V-50) and MIL-P-46593A (Fragment Simulating Projectiles), this new product is the logical upgrade that exceeds UL 3 by 70%.

• Quality Control Through

Our Own Manufacturing

• UL Listed Products

• UL Levels 1-8 Available

• Same Day Shipment

• Factory Technical Support

For Protection Against Blast Shrapnel & Simultaneous, Multiple Handgun Attack The logical upgrade from UL 3

ARMORTEX® BULLET / BLAST PROTECTION FIBERGLASS COMPOSITE PANELS

NEW FROM ARMORTEX® FRAG-STOP COMPOSITE PANELS

WWW.ARMORTEX.COM • ARMORTEX® • 800-880-8306 • FAX 210-661-8308

NAME

FS-1

FS-2

FS-3

THICKNESS

0.29”

0.46”

0.77”

ARIAL DENSITY

2.90 PSF

4.80 PSF

7.80 PSF

PROJECTILE

.22 CAL FSP

.30 CAL FSP

.50 CAL FSP

BALLISTIC LIMIT

1690 FPS

1786 FPS

1723 FPS

0.46” 4.80 PSF .30 CAL FSP 1786 FPSFS-2

THICKNESSNAME BALLISTIC LIMIT

R

4484_02.indd 24484_02.indd 2 9/9/08 12:10:03 PM9/9/08 12:10:03 PM

FIBERGLASS COMPOSITE BALLISTIC CHARTS - U.L. UNDERWRITERS LABORATORY

NOTES

ABBREVIATIONS USED IN THIS CHART

FT . (KGS./SQ. MTR.)

LEVEL WEAPON AMMUNITIONVELOCITYFT./SEC.

NOMINAL THICKNESS

INCHES (mm)

O. F. 100 2.0 (10) 3/16 (5) UL1 (MPSA) 9 mm 124 GR FMJ 1175-1295 L U ®

L U ®

L U ®

L U ®

L U ®

L U ®

L U ®

L U ®

O. F. 200 3.0 (15) 5/16 (8) UL 2 (HPSA) .357 MAGNUM 158 GR SP 1250-1375

O. F. 300 4.0 (20) 7/16 (12) UL 3 (SPSA) .44 MAGNUM 240 GR LEAD 1350-1485

O. F. 400 12.0 (59) 1-3/16 (30) UL 4 (HPR) .30 cal RIFLE 180 GR SP 2540-2794

O. F. 500 14.5 (71) 1-3/8 (35) UL 5 7.62 mm RIFLE 150 GR FMJ 2750-3025

O. F. 600 3.0 (15) 5/16 (8) UL 6 9 mm UZI 124 GR FM J MUL TIPLE SHOTS

55 GR FM J MUL TIPLE SHOTS

1 50 GR FM J MUL TIPLE SHOTS

1400-1540

O. F. 700 11.5 (57) 1-1/8 (29) UL 7 5.56 mm M- 16 3080-3388

O. F. 800 14.5 (71) 1-3/8 (35) UL 8 7.62 mm M- 14 2750-3025

ARMOR TEX ®

PRODUCT NOMINAL WEIGHT

LBS/SQ.

ALL THE ABOVE PRODUCTS ARE UL LISTED

UL Listed product levels 1, 2, 3, 4, 5, 6, 7 and 8.

UL - Underwriters LaboratorySP - Soft PointGR - Grains

MPSA - Medium Power Small ArmsHPSA - High Power Small ArmsSPSA - Super Power Small Arms

HPR - High Power RifleFMJ - Full Metal JacketJSP - Jacketed Soft Point

Armortex® provides a limited warranty for its Armortex® products for a period of twelve months (1 year) from date of shipment against defects in material and workmanship. Such limited warranty is made only to those who purchase these products directly from Armortex. Please contact Armortex for the complete limited warranty.

Armortex® products are designed for installation by persons having requisite skill and knowledge and at their own discretion and risk. Armortex® has no control over the

use to which others may put any material or product. Each user of the material or product should make his or her own tests to determine the suitability of the material or product. Liability under this limited warranty is limited to either replacement of product, excluding cost of installation, or at Armortex®’s option to refund Armortex®’s invoice price.

Armortex® and FRAG-STOP® are registered trademarks of Armortex®, Inc.

ARMORTEX® LIMITED WARRANTY

ARMORTEX® • 800-880-8306 • FAX 210-661-8308 • WWW.ARMORTEX.COM

R

4484_03.indd 34484_03.indd 3 9/9/08 12:10:41 PM9/9/08 12:10:41 PM

WWW.ARMORTEX.COM • ARMORTEX® • 800-880-8306 • FAX 210-661-8308

R

ARMORTEX® BLAST MITIGATION WINDOWS

In an increasingly unfriendly world we are seeing the growing use of explosive devices as tools of terrorism. Governments as well as private industry have developed new standards to address the threats to facilities and occupants. For blasts to be effective they must be close to the chosen target. Though it is not always possible to control the setback or standoff distance, windows and doors can be designed to mitigate most blast incidences. With these designs blast mitigation can be achieved to lessen injury and loss of life. ARMORTEX® now offers two product groups of blast windows, all of which are thermally broken. Our model 625 BL blast mitigation window protects against high blast overpressure up to 42 psi. Our model 625 BL/BR is also available for both blast and bullet resistant protection up to .30 cal. armor piercing. The model 625 windows are designed for commercial, industrial, military or Department of State applications. Additionally available from ARMORTEX® are our LP blast windows with low over pressure limits of 6 psi in compliance with the UFC 4-010-01 January 2007, GSA –TS01-2003 and ASTM F 1642-04. These models are LP 225 Projected, LP 225 Fixed, LP 400 Single Hung and LP 400 Fixed. A typical application for this type of window may be military bases, GSA facilities or other occupied public structures.

625 BL LP 225 PROJECTED

4484_04.indd 44484_04.indd 4 9/9/08 12:11:21 PM9/9/08 12:11:21 PM

ARMORTEX® • 800-880-8306 • FAX 210-661-8308 • WWW.ARMORTEX.COM

R

ARMORTEX® BLAST MITIGATION THERMALLY BROKEN WINDOW MODELS

Model 625 – High Over Pressure

625 BL, 42 psi, 300 msec, frame depth 6.25”, maximum glazing cavity depth 2.875”, engagement 1.75”

625 BL/BR, 42 psi, 300 msec, .30 cal. Armor Piercing, maximum glazing thickness 2.875”, engagement 1.75” Model LP – Low Over Pressure All tested to UFC 4-010-01 January 2007, GSA-TS01-2003 and ASTM 1642-04 LP 225 Projected out, frame depth 2.25”, maximum glazing thickness 1.00”

LP 225 Fixed, frame depth 2.25”, maximum glazing thickness 1.00”

LP 400 Single hung, frame depth 4.0”, maximum glazing thickness 1.00”

LP 400 Fixed, frame depth 4.0”, maximum glazing thickness 1.00”

625 BL LP 225 FIXED

ARMORTEX® BLAST MITIGATION WINDOWS

4484_05.indd 54484_05.indd 5 9/9/08 12:13:18 PM9/9/08 12:13:18 PM

SPEAKERSCOMBINATION TRANSACTION WINDOW-UL LISTED STAINLESS STEEL FRAME

TRANSACTION WINDOW-3-SIDED HOLLOW METAL FRAME

TRANSACTION WINDOW-CLAMP TYPE

METAL PACKAGE RECIEVERS ARCHITECTURAL ALUMINUMFRAMING SYSTEMS

BULLET RESISTANT TRANSACTION DRAWERS

BULLET RESISTANT WOOD AND

STEEL DOORS

ARMORTEX® 5926 CORRIDOR PARKWAY • SCHERTZ, TX 78154

1-800-880-8306 • 210-661-8306 • FAX 210-661-8308 WWW.ARMORTEX.COM • WWW.FRAG-STOP.COM • INFO@ARMORTEX.COM

R

4484_06.indd 64484_06.indd 6 9/9/08 12:14:17 PM9/9/08 12:14:17 PM