Business Enabled Communications

Administration

Contents•Starting Web Service• User’s Guide• Station Program• Admin & Maintenance• ID & Password• Web Access Authorization• Admin Categories• Overview Menu• New Window• Related PGM Link

• Numbering Plan Type• System Numbering Plan• Flexible Station Number• CO Group Access Code• Feature Code Numbering• Station Group Number• Networking Numbering

Install iPECS-MG system Default MPB IP address : 10.10.10.1 Or, configure MPB IP using RS-232 port. Connect to the system IP on web browser.

iPECS-MG web service homepage provides ; User’s Guide Station Program Admin & Maintenance

Starting Web Service

WEB Admin

• Click ‘User’s Guide’ to refer to brief user’s guide.

Program Codes (Overview) Numbering Plan (Overview) User Name Registration Station Speed Dial System Speed Dial Dial by Name Intercom Signaling Mode Station Flexible buttons Call Forward Transfer Authorization Codes DND Call Pick-up Paging How to access CO/IP line?

• User’s guide provides;

User’s Guide

WEB Admin

Click ‘Station Program’ menu and enter desired station number and password.

Station Port Attributes Station DN Attributes Call Forward Pre-Selected Message Station Speed Dial Station Flexible buttons Station ICLID Mobile Extension Attributes Send Internal SMS ACD Group Management ACD Group Call Traffic User Guide

• Station Program provides ;

Password is mandatory for station program.

Station Program

WEB Admin

Click ‘Admin & Maintenance’ menu to start Admin.

Web Admin Categories are displayed according to the user level.

Enter User ID and Password for web admin and click ‘Login’ button.

Admin & Maintenance

WEB Admin

Admin ID & Password at System Data System Data > System Password (226) Basic Password tab : ID & Password of User, Admin. and Maint. Additional Password tab : ID & Password of User2, User3, Admin2 and Admin3.

ID & Password

WEB Admin

Click System Data > Web Access Authorization Accessibility of 3 Users & 3 Administers about every Admin fields. Maint. ID has no restriction.

User Access level control at System Data

Web Access Authorization

WEB Admin

• Pre-programmed data• Numbering Plan• Station Port Data• Station Number Data• CO Line Data• Station Group Data• System Data• Table Data• Tenant Data• Board Data

• Voice Network• T-Net Data• H.323 Data• SIP CO Data (web only)• SIP Station Data (web only)• Zone Data (web only)• SNMP Data (web only)• DECT Data • Green Mode (web only)• Initialization

Admin Categories

Admin Categories

ADMINISTRATION MENU

PRE-PROGRAMMED DATA

Location Program(100)Slot Assignment(101)Logical Slot Assignment(103)DECT/IP/SIP Max Port(104)IP-Phone Registration(106)DTIM/SLTM Registration(107)IP Address Plan(108~109)

NUMBERING PLAN

Numbering Plan Type(110)System Numbering Plan(111)Flexible Station Number(112)Feature Numbering Plan(113)Station Group Number(115)ACD Group Number(115)

STATION PORT DATA

Station Type(120)Station Port Attribute(121~124)Station Flexible Button(126)CTI IP Address

ADMINISTRATION MENU

STATION NUMBER DATA

Station DN Assignment(130)Station DN Attribute(131~135)COS Assignment(137)Auto Dial Attribute(138)Preset Call Forward(142)Call Forward(143)VMIB Attribute(145)Mobile Extension Attribute(146)CO/IP Group Access(150)Page Zone Access(151)Command Group Access(152)

CO LINE DATA

CO Line Attribute(160~163)Incoming CO ATTR(165~166)CO Ring Assignment(167)Normal/DISA CO ATTR(168)Incoming CO Alternative(169)Outgoing CO ATTR(170~171)Outgoing CO Alternative(173)CO Inter-Digit Timer(174)DTMF Send Interval(175)CO COS Assignment(177)CO-to-CO Attribute(179)CO Group Access Code(180)Alternative Ring Table(181)

Admin Categories

ADMINISTRATION MENU

STATION GROUP DATA

Station Group Assign(200)Station Group Attribute(201~202)Voice Mail Group(203)Call Pick-Up Group(204)Page Group(205)Command Conference Group(206)PTT Group(208)Interphone Group(209)Pilot Hunt Group(210~211)ACD Group Assignment(212)ACD Group Attribute(213~214)ACD Group Announcement(215)ACD Agent State & Priority

SYSTEM DATA

System Timer(220~222)System Attribute(223)System Password(226)Alarm Attribute(227)External Control Contact(228)Music Source(229)RS-232 Setting(230)Serial Port Selection(231)SMDR Attribute(232)System Date & Time(233)LED Flashing Rate(234)

ADMINISTRATION MENU

SYSTEM DATA

PPP Attribute(235)Mobile Attribute (236)Intercom Busy Digit(237)Dial-Tone Digit Table(240)Executive/Secretary Assign(241)Executive Access(242)PPTP AttributeWeb Access Authorization

TABLE DATA

Toll Exception Table(250)Digit Conv Table(251~252)System Time Table(253~254)LCR Time Table(255)Holiday Time Table(256)System Speed Dial(257)Emergency Code Table(258)Announcement Table(259)CCR Table(260)ICLID Table(262)CLI Conversion Table(263)Tone Frequency/Cadence(264)Ring Table(265)Ring Frequency/Cadence(266)Voice Mail Dial Table(269)

Admin Categories

ADMINISTRATION MENU

TENANT DATA

Attendant Group Assignment(270)Attendant Group Attributes(271~2)Night ATD Group Assign(275)Night ATD Group ATT(276~277)Tenant Attribute(280~281)Tenant Group Access(283)CO Call Restriction(284~285)Local Call Prefix Table(286)Long Call Prefix Table(287)International Call Prefix(288)Tone Table(290)

BOARD DATA

ISDN/Digital Board Attribute(300)ISDN Clock Priority(301)VOIB/VMIB Board ATTR(305)Reset Board(310)

VOICE NETWORKNetworking Attr(320)Networking Numbering(321)

T-NET DATA

T-Net Attribute(330)CM Attribute(331)FoPSTN Attribute(333)T-Net Board Attribute(334)IP-Phone T-Net Enable(335)

ADMINISTRATION MENU

H.323 DATA

H.323 Routing Attribute(360)H.323 Call Attribute(361)H.323 Incoming ATTR(362)GK Attribute(363)

SIP CO DATA

SIP CO Basic RegistrationSIP CO Additional RegistrationSIP CO CodecSIP CO User ID Table

SIP Station DATASIP STA Basic RegistrationSIP STA Additional RegistrationSIP Station Service

ZONE DATA

Zone AttributeZone RTP Relay GroupInter Zone AttributeStation Zone Attribute

SNMP DATA SNMP Data

DECT DATADECT Registration(0#)DECT Attribute(491)

GREEN MODEGreen Mode ActivationGreen Mode Time Setting

INITIALIZATION Initialization(499)

Admin Categories

• ‘ Overview’ menus in STA, Station Group or CO PGM categories.

Overview Menu

• Click [N] to open new window.

New Windows

• Some PGM has link menu for other PGM

Related PGM Link

6 Types of Numbering Plan default values set can be selected.

Type 1 Type 2 Type 3 Type 4 Type 5 Type 6

Station Numbers 100 ~ 473 100 ~ 699 1000 ~ 1647

7000 ~ 7647

2000 ~ 2647

2000 ~ 2647

Attendant Call 0 *9 0 0 9 #9

CO Group Access Code (Any Grp) 9 0 9 1 0 0

CO Group Access Code 801~ 872 *801 ~ *872 801~ 872 401~ 472 801~ 872 801~ 872

Feature Code 5xx, 6xx, etc

*5xx, *6xx, etc

5xx, 6xx, etc

5xx, 6xx, etc

5xx, 6xx, etc

*5xx, *6xx, etc

Hunt Group 620 ~ 669 *620 ~ *669 620 ~ 669 620 ~ 669 620 ~ 669 *620 ~ *669

Numbering Plan Type (ADM 110)

Numbering Plan

Maximum 8 digit numbering is possible. Every Numbering Plan codes should be matched with System Numbering Plan.

- Prefix Code : preceding digits in common - More digits : number of following digits after prefix code - Master Prefix digits : upper 4 digits among prefix code

; XXXXXXXX (Max 3 in iPECS-MG 100, 5 in iPECS-MG 300)

2XXX0*4*5XX*6XX*7*8XX#8XX#9#*XX1XXX

If deleted, all of the related numbering plan codes are deleted!

System Numbering Plan (ADM 111)

Numbering Plan

Make Station Number 1000 ~ 1499

- Required Numbering Plan : 450XXXX - Prefix Code : 450, More digits : 4- Master prefix digits : 450 => Assign Station Numbers at ADM 112.

Make Station Number 4501000 ~ 4504899

- Required Numbering Plan : 1XXX - Prefix Code : 1, More digits : 3- Master prefix digits : None=> Assign Station Numbers at ADM 112.

- Required Numbering Plan : 80X ~ 87X, 8# - Prefix Code : 80 ~ 87, More digits : 1- Prefix Code : 8# , More digits : 0- Master prefix digits : None => Assign Feature Codes at ADM 113.

Make Feature Codes 801 ~ 872 and 8#

Examples

Numbering Plan

• Check and edit Station Number one by one • Change Station Number using order range

• Change Station Number using station range

• Station Number search

To Assign new numbering, proper System Numbering Plan should exist!!

Flexible Station Number (ADM 112)

Numbering Plan

• Select [Feature Numbering] tab at Feature Numbering Plan menu• Check or edit Feature Code one by one

To Assign new numbering, proper System Numbering Plan should exist!!

Feature Code Numbering (ADM 113)

Numbering Plan

• Select [CO Group Access Code] tab at Feature Numbering menu.• Check or edit CO Group Access Code one by one

• Assign CO Group Access Code using order range

• Delete all CO Grp Access Code using order range

To Assign new numbering, proper System Numbering Plan should exist!!

CO Group Access Code (ADM 114)

Numbering Plan

• Select [Station Group Number] tab at Feature Numbering menu.• Check or edit Feature Code one by one

To Assign new numbering, proper System Numbering Plan should exist!!

• Assign Station Group Number by using order range

• Delete all Station Group Number by using range

Station Group Number (ADM 115)

Numbering Plan

• Open ADM 321 at Voice Network Data.• Enter index number to edit and load data.

To Assign new numbering, proper System Numbering Plan should exist!!

• Check ADM 111 and all the other numbering plan to assign or remove Net Numbering.

Networking Numbering (ADM 112)

Numbering Plan