business guide when mass production can meet individual...
TRANSCRIPT
When mass production canmeet individual demands.
Even Karla’s.
That’s Ingenuity for life.
www.siemens.be/industrie
Until now, production processes were either fast orflexible. Intelligent machines have changed that. For acosmetics company this means being able to producean entire range of shampoos using a single assemblyline. It means being able to bring their products ontoshelves in half the time. It also means being able toreact efficiently to even the most individual customerdemands.This matters because it is a competitiveedge for the manufacturer. And it ultimately makesreal what matters by opening up many new possibili-ties for everyone. And that’s Ingenuity for life.
Ad Sie ELMA 10-2016_Opmaak 1 27/10/16 13:55 Pagina 1
2160001868_ADV_6845.indd 1 07-11-16 15:59
Business Guide
Busi
ness
Gui
de -
Belg
ian
Mec
hani
cal S
uppl
iers
Belgian Mechanical Suppliers
www.stewal.com
Unieke badafmetingen
Met een lengte van 13 m, een breedte van 1,6 m en
een diepte van 3,5 m beschikt
VERZINKERIJ LENSSEN
over één van de diepste verzinkingsbaden
in België en Europa.
H. FORDLAAN 5 I 3600 Genk I Tel. 089/61 34 20 - 61 34 21 I Fax 089/61 34 22
Repair, overhaul and retrofit of machine tools
SKS MACHINES BVBABedrijvenpark “De Veert” 13-014 - B-2830 Willebroek - België
TEL: +32(0)38444164 - FAX:+32(0)3 844.87.91 - www.sks-machines.be - [email protected]
Manufacturer of high precision flatbed milling machines in granite
afteRbefoRe
2160001827_ADV_6845_1.indd 1 09-11-16 16:42
Business GuideBelgian Mechanical Suppliers
PUBLIREPORTAGE
Oerlikon Balzers Coating Benelux NV | Schurhovenveld 4050 | B – 3800 Sint-Truiden T +32 11 69 30 40 | F +32 11 69 29 45 | www.oerlikon.com/balzers/be
OERLIkOn BALzERs REInvEnTs cOATInG.Oerlikon Balzers is the leading global supplier of PVD coatings which improve the performance and service lives of precision components as well as metalworking and plastics processing tools. These coatings developed by Oerlikon Balzers and marketed under the BALINIT® brand are extremely thin and very hard.BALINIT® coatings show added value in following applications: – Cutting tools (new or reconditioned)– Punching and forming tools, die casting and
plastic moulds – Components in general engineering
applications Online coating-guide is available. This guide enables the users to determine the right coating for his specific application: www.coating-guide.balzers.com
BALINIT® DYLYN coatingsOur DYLYN coatings meet the wear resistance and friction characteristics needed for your component. The application is well-established in many industries. We frequently apply the amorphous coatings to parts and components for the engineering, automotive, plastics processing, and semiconductor industries.
BALINIT® CROMA PLUSDeveloped especially for processing of highly adhesive plastic and elastomer materials. The coating excels through its thin top coating which is doped with special constituents. These form a glass like structure with a very low degree of surface energy. This property results in highly wear resistant surfaces with an extremely low tendency of sticking.
BALINIT® FORMERA/PLUSTo provide increased passenger safety, and simultaneously comply with emissions legislation, future vehicles must be stronger and yet lighter. Each new vehicle model therefore contains a higher proportion of modern, high strength steel than its predecessors. To ensure high productivity when forming these demanding steels, especially resilient coating solutions are required.
PPD™ (Pulse Plasma Diffusion) processWear protection for large tools in cast iron and steel. 40 years’ experience in the industrialization of plasma processes and the close collaboration with press shops in the automotive industry gave the desire to develop improved treatment concepts for large press tools. We succeeded in making high quality outer skin tools, more wear resistant, more reliable and more productive.
PVD optimized components for practical use Automotive: Whether engines or drive trains, oil pumps or brakes, headlights or rims, bodywork or interior: in modern motor cars, trucks and motor cycles there is hardly anything, in manufacture or in operation, where BALINIT® is not involved. Aerospace: The solution of wear problems affecting aircraft components begins with the exact analysis of mating surfaces, including all the participating ambient influences.This provides insight into the frictional and wear mechanisms that have occurred and caused the failure of a component. Within the portfolio of BALINIT® hard coatings with various properties, there is always a solution for the component surface to banish the present problems.
2160002340_ADV_6845.indd 1 09-11-16 16:51
3
Belgian mechanical SUPPlieRS aT a glance
Are you looking for a supplier in casting, high-pressure casting, metal cutting, sheet metal, surface
treatment, thermal and/or chemical treatment and/or assembly? Or maybe a supplier specialised in
mechanical engineering, construction products, automotive, aerospace, etc.?
Perhaps you need a partner who can take over as many of your tasks as possible in the field of
production, assembly, supply management and logistics. Or rather a partner who can support you by
supplying sub-modules and modules. Or even a partner who can help you engineer
new products…
In this Business Guide of the Belgian Mechanical Suppliers you will discover at a glance a unique list of more
than 100 suppliers who are all Agoria members. You will surely find what you need since these companies
offer solutions to virtually every economic sector. And today it is more and more about offering total
solutions (products, modules and sub-modules and/or services) adaptable to the client’s needs.
Besides all the contact details, this guide offers you a detailed overview of the production possibilities
of the various suppliers.
We wish you much success finding suitable business partners and realising your projects!
Who should you contact for more information?
Peter PerremansHead Materials Industries
T +32 2 706 89 04
Materials industries80 Bd. A. Reyers Ln
A. Reyerslaan 80
1030 Brussels
agoria.be
PUBLIREPORTAGE
Oerlikon Balzers Coating Benelux NV | Schurhovenveld 4050 | B – 3800 Sint-Truiden T +32 11 69 30 40 | F +32 11 69 29 45 | www.oerlikon.com/balzers/be
OERLIkOn BALzERs REInvEnTs cOATInG.Oerlikon Balzers is the leading global supplier of PVD coatings which improve the performance and service lives of precision components as well as metalworking and plastics processing tools. These coatings developed by Oerlikon Balzers and marketed under the BALINIT® brand are extremely thin and very hard.BALINIT® coatings show added value in following applications: – Cutting tools (new or reconditioned)– Punching and forming tools, die casting and
plastic moulds – Components in general engineering
applications Online coating-guide is available. This guide enables the users to determine the right coating for his specific application: www.coating-guide.balzers.com
BALINIT® DYLYN coatingsOur DYLYN coatings meet the wear resistance and friction characteristics needed for your component. The application is well-established in many industries. We frequently apply the amorphous coatings to parts and components for the engineering, automotive, plastics processing, and semiconductor industries.
BALINIT® CROMA PLUSDeveloped especially for processing of highly adhesive plastic and elastomer materials. The coating excels through its thin top coating which is doped with special constituents. These form a glass like structure with a very low degree of surface energy. This property results in highly wear resistant surfaces with an extremely low tendency of sticking.
BALINIT® FORMERA/PLUSTo provide increased passenger safety, and simultaneously comply with emissions legislation, future vehicles must be stronger and yet lighter. Each new vehicle model therefore contains a higher proportion of modern, high strength steel than its predecessors. To ensure high productivity when forming these demanding steels, especially resilient coating solutions are required.
PPD™ (Pulse Plasma Diffusion) processWear protection for large tools in cast iron and steel. 40 years’ experience in the industrialization of plasma processes and the close collaboration with press shops in the automotive industry gave the desire to develop improved treatment concepts for large press tools. We succeeded in making high quality outer skin tools, more wear resistant, more reliable and more productive.
PVD optimized components for practical use Automotive: Whether engines or drive trains, oil pumps or brakes, headlights or rims, bodywork or interior: in modern motor cars, trucks and motor cycles there is hardly anything, in manufacture or in operation, where BALINIT® is not involved. Aerospace: The solution of wear problems affecting aircraft components begins with the exact analysis of mating surfaces, including all the participating ambient influences.This provides insight into the frictional and wear mechanisms that have occurred and caused the failure of a component. Within the portfolio of BALINIT® hard coatings with various properties, there is always a solution for the component surface to banish the present problems.
2160002340_ADV_6845.indd 1 09-11-16 16:51
Since 1924, METAUX EMBOUTIS is a subcontractor in sheet metal work.Presses, tools workshop, punches, laser cutting machines, spark erosion machines (sinking or wire), mechanical and hydraulic presses for all tonnages, etc. in an entity which today extends over more than 6,000 m².
6 trading sectors: • Laser Cutting • Punching • CNC Folding • Welding • Cutting - Stamping • Assembly
Key Markets:Electrical and electronic equipment, construction and mining equipment, power solutions, armament, aerospace, medical sector
References : • ABB • Areva • Caterpillar • CE+T •CE+T Technics • General Electric • Schneider • Schreder • Tenneco (Monroe) • Volvo • ...and a lot of SME’s from various sectors
Certifications: ISO 9001:2008, Caterpillar SQE-MQ11005, EN9100:2009 in progress
METAUX EMBOUTIS SARue Haute Marexhe, 176 - BE 4040 HERSTALContact: Christine ROSEMBOOMT.+32 4 248 08 [email protected] - www.metauxemboutis.be
Unieke badafmetingen
Met een lengte van 13 m, een breedte van 1,6 m en
een diepte van 3,5 m beschikt
VERZINKERIJ LENSSEN
over één van de diepste verzinkingsbaden
in België en Europa.
H. FORDLAAN 5 I 3600 Genk I Tel. 089/61 34 20 - 61 34 21 I Fax 089/61 34 22
5
3D infinitywww.3dinfinity.be
Products3D printing 3D Infinity is a consultancy, engineering and production company for metal and plastic additive manufacturing. We help companies to understand the benefit of adopting 3D printing as part of their wide range of complementary manufacturing possibilities. We help our clients to redesign their parts or applications to reach the highest quality possible through the printing process, with a focus on the function of the application and the new possibilities presented by this manufacturing technology. Once the 3D optimization process is complete, 3D Infinity coordinates and facilitates the production process from the first prototype up to manufacturing.
PlasticsWith several professional machines in our production hall, 3D Infinity can 3D print several plastics with a resolution up to 32 µm.These plastics are suitable for functional prototypes and end- use parts.
Metals3D Infinity uses the powder bed laser beam technology to produce 3D printed parts in different types of Stainless steel and Titanium. In that respect 3D Infinity is focused and specialized in printing small, very complex parts with very high accuracy (55µm beam spot and 20-90µm layers).
3D scanningIf a CAD design is not available, our company has the possibility to take a scan of the object and reverse engineer it throw special software. The scanners work with a resolution up to 50 µm so detailed scans are guaranteed.
Key MarketsFurniture
Address
Hellestraat 20
9910 Knesselare
Contact
Simon Truant
Zaakvoerder
T: +32 476 67 91 78
3D printing
6
3mwww.3m.be
Products
Adhesive assembly solutions
Surface finishing abrasives & precision grinding wheels
Ceramic, high friction resistant mechanical bearings
Diamond friction shims
Plastic Processing Additives, fluoropolymers
Personal safety solutions
Key Markets
OEM industry: machine building, pump & valve manufacturing,
gear manufacturing, automotive OEM etc
Metal fabrication
Plastic & rubber processing
References
Operations in 70 countries around the word. Belgian sales office
located in Diegem. Manufacturing sites located in Zwijndrecht
and Nivelles.
Certificate
3M has been recognized as a 2016 World’s Most Ethical
Company® by Ethisphere. 3M is one of only 5 companies in the
Industrial Manufacturing category named to the list.
Address
Hermeslaan 7
1831 Diegem
Contact
Angelica Krsteski
Market Leader Industry
T: +32 477 63 24 84
Isabelle Mormal
Market Leader Transportation
T: +32 477 23 16 28
Turnover
€ 150.000.000
Workforce
641 in Belgium
Assembly
7
acD nvwww.acdnv.be
Products
Mechanical Maintenance, Predictive Maintenance, Machine
building, Piping & Construction Projects
Since 1989 industrial maintenance is the core business of
ACD. Our services evolved from engineering to hands-on
maintenance on site. Today ACD is a loyal partner in industry in
the departments mentioned above, a company with an eye of
safety and quality.
Key Markets
Chemistry – Petrochemistry – Oil refinery – Pharmaceuticals
Waste – Food industry
References
Evonik Antwerp – BASF – Indaver – ISVAG – Total Antwerp
Unilever
Certificate
VCA Petro
EN 1090-1
Address
Postbaan 73
2910 Essen
Contact
David Early
Sales / CEO
T: +32 3 667 47 43
Turnover
€ 7.500.000
Workforce
65
8
acm Sa (atelier de construction métallique)
Products
ACM is a metalwork company. Our services include metal
treatment, welding construction and machining, as well as
mechanical engineering (incl. development, assembly
and integration).
Key Markets
Food, automobile, aviation, paper, medical, rubber, wood,
medicine, construction, plastic and renewable energy industries.
References
DÜRR ECOCLEAN, SCHOELLER WERK, TS ELINO, HOLTEC,
EUROPEENNE DE LYOPHILISATION, NMC, ANDRITZ KÜSTERS,
SONACA, DREVER, CRM, TECNA, KABELWERK EUPEN, AMOS
Certificate
EN ISO 3834-2
DIN EN 1090 EXC3
AD2000-leaflet HP 0
International Welding Specialist
DIN EN ISO 9712 Penetrant Testing Level 2
EN ISO 9606-1 + AD2000 HP3 welder’s qualifications
Address
Blausteinstrasse 1
4780 Recht
Contact
Gabriel Hüweler
Sales Manager
T: +32 80 310 110
Turnover
€ 5.973.000
Workforce
50
Forging
Machining
Sheet Metal Work
Surface Treatment
Assembly
9
aDDiPaRTS sprlwww.addiparts.com
Products
Additive Manufacturing Services for the Industry including
- Consultancy and Services in 3D printing.
- Rapid manufacturing of functional prototypes, parts,
tools and jigs.
- Additive manufacturing of end-use parts in industrial
grade thermoplastics.
Key Markets
Industrial machines - Aerospace - Defence
Medical Devices
Motor vehicles - Consumer products/electronics
Certificate
ISO 9001:2008 - ISO 13485:2012
Address
ZI de Jumet
Allée Centrale, 68
6040 Jumet
Contact
Charles Demoulin
General Manager
T: +32 472 59 03 29
Workforce
2
Machining
Assembly
3D printing
10
advanced coatingwww.advanced-coating.com
Products
Advanced Coating designs, develops and applies arc, cold,
plasma and supersonic spraying of metals, alloys, ceramics and
carbides on all kinds and sizes of machine parts.
Specialist in flat and cylindrical grinding as well as super finishing
and dynamic balancing.
Key Markets
Steel industry, aeronautics, textile, electrotechnic, oil industry.
References
ArcelorMittal, Thyssen Krupp, Tatasteel, Snecma, Schneider
Electric, Groupe Safran.
Certificate
ISO 9001 - ISO 14001 - EN 9100 - NADCAP
Address
rue de l’Avouerie 7
4000 Sclessin (Liège)
Contact
Pierre Philippe Janssen
Directeur
T: +32 4 254 50 11
Turnover
€ 3.200.000
Workforce
19
Surface Treatment
11
A company of the
allard-europewww.allard-europe.com
Products
Allard Europe is a one-stop-shop jobbing foundry producing
castings fully processed according to the technical specifications
of the customer in non-alloyed to high-alloyed material, in steel
with a piece weight ranging from a few hundred kilograms to 30
tons.
Products: pump components, impellers, machine parts, high
strength applications, complex shapes.
Key Markets
Dredging, offshore, construction, energy, shipbuilding, metal
industry, cement & mining
References
Allseas, Andritz, Atlas-Copco, Boskalis, DEME, Jan De Nul,
Van Oord, Royal IHC
Certificate
Iso 9001 certified, ABS/GL/DNV/Lloy’ds approval
Address
Veedijk 51, 2300 Turnhout
Contact
Stefan Mettler
Managing Director
T: +32 14 42 11 11
Turnover
€ 17.000.000
Workforce
110
Foundry
Machining
12
aluro cnc nvwww.aluro-cnc.com
Products
Aluro CNC is your ideal partner for the manufacturing of
mechanical parts in different materials like aluminum, steel,
stainless steel and all kinds of plastics.
Moreover, we do not just limit ourselves to turning or milling.
Each product is manufactured from the raw material to a high-
end product. For this we have our own assembly department
and carefully selected partner companies who share our high
priority for excellent quality.
Key Markets
Aerospace, machine building, electronics, telecommunications,
food industry, wind energy, …
References
Barco View, Barco Media & Entertainment, ZF Wind Power,
Soleras Advanced Coatings, Michel Van de Wiele, Xeikon, …
Address
Industriepark 12
2220 Heist-op-den-Berg
Contact
Steven Bessems
Managing Director
T: +32 15 25 72 76
Turnover
€ 5.500.000
Workforce
35
Machining
13
arcelormittal Ringmillwww.arcelormittalringmill.be
ProductsFor more than 2 decades ArcelorMittal Ringmill has supplied steel
rolled rings to the Wind industry. Its state of the art ring rolling mill
combined with extensive heat treatment equipment is perfectly
designed to manufacture alloyed steel rings for critical applications
such as slewing rings and gearboxes. Backed by Industeel‘s steel
shop, ArcelroMittal Ringmill located in Seraing (Belgium) provides
an integrated solution from steel making to steel shaping. Its highly
automated rolling process combined with a stable upstream steel
production route guarantee a constant and reproducible quality
of its products. With its knowhow in rolling and heat treating steel
rings that require stringent level of strength, ductility toughness
and fatigue resistance, ArcelorMittal Ringmil is now become a key
supplier in gearboxes and slewing rings for the wind industry.
Key MarketsRenewable Energy (Wind power, Pelletizing …) - Industry -
Building and civil engineering - Urban and interurban transport.
ReferencesLiebherr – Siemens – S.K.F. – Bühler Group
CertificateISO9001, ISO14001, OHSAS18001, Lloyd’s Register, Germanischer
Lloyd, Det Norske Veritas, American Bureau of Shipping
Address
rue Philippe de Marnix 3
4100 Seraing
Contact
Frédéric Biname
Sales Manager
T: +32 4 330 35 35
frederic.biname@
arcelormittalringmill.be
Turnover
€ 20.000.000
Workforce
86
Forging
Machining
Surface Treatment
Heat Treatment
14
asco industrieswww.asco.be
Products
Asco is a proven specialist in the co-development, design,
precision machining, processing and certified assembly of
complex high-strength aircraft components (flaps and slats
mechanisms, attachments, landing gear components, etc.).
Key Markets
Commercial, regional, business and military aircraft platforms
References
Major Customers: Airbus, Boeing, Bombardier, Embraer,
Lockheed Martin, Spirit Aerosystems, Stelia, Safran, Triumph,
Premium Aerotec, UTC Aerospace Systems.
Certificate
Individual customer certifications as well as quality certifications:
AS/EN 9100-rev C, EASA Part 145, Belgian CAA: BE.21G.0005,
NADCAP Heat Treatments / Non Destructive Testing /
Non-Conventional Machining / Surface Enhancement
Address
Weiveldlaan 2
1930 Zaventem
Contact
Christine Pardon
Executive Assistant
T: +32 2 716 06 11
Turnover
€ 320.000.000
Workforce
1450
Machining
Surface Treatment
Assembly
15
ateliers De ceuster Sa/nVwww.ateliersdeceuster.be
Products
Sheet metal work: design, development, improvement and
manufacturing of new or existing products for industry
or architecture.
Key Markets
Industry: aviation, medical technologies, machine builders.
Architecture: architecture offices or contractors, manufacturers
of furniture, store developers, stand builders.
References
Techspace Aéro, Aseptic Technologies, Delens, Louis Dewaele,
Conceptexpo, RTBF, PRG.
Certificate
Validation of manufacturing processes by customers.
Address
Avenue Edison 6
1300 Wavre
Contact
Benoit Debaere
Sales Manager
T: +32 10 23 54 73
Turnover
€ 1.800.000
Workforce
18
Sheet Metal Work
Surface Treatment
Assembly
16
Beerse metaalwerkenwww.beerse-metaalwerken.be
Products
Special steel constructions, mechanical parts and mechanical
services, tailored to the client’s prescriptions.
Key Markets
Local industrial clients
References
Several industrial clients
Certificate
VCA*
Address
Lilsedijk 17
2340 Beerse
Contact
Dirk Verguts
Directeur
T: +32 14 62 24 36
Workforce
29
Machining
Sheet Metal Work
17
Belgium coatingswww.belgium-coatings.be
Products
Sandblasting, metallization and application of all kinds of liquid
paints. Powder coating, series (0.800x6000x2000) and larger
pieces (12000 x 3000 x 3000). Work is done in our own plant, in
heated workshop (STEEL-ALU-GALVA-FONT).
New: High Finish painting
Key Markets
Urban Furniture, furniture especially employed in the railway
industry, lighting, access ,safety railings, balconies, acoustic panels,
solar panels, barriers, fences, art ironwork, silos, locksmiths,
automotive equipment and all kinds of metal constructions.
References
MICE, RER, SNCB, SNCF, STIB, CMI, ArcelorMittal, Meunier Group,
Mecanicsystems, New La Chaussée, Truflo Rona, Ferronnerie
Jadin, Icarus, Dalla Valle, T.M.I., Franche-Comté Signaux,
NCC, Metal Quartz, T.H.V. Onez, Viry, BAM, Poncin, Arendt,
Bemelmans, Galvapower, Cebeo, IBGE,...
Certificate
ACQPA, VCA, FMB, QUALITYSTEELCOAT…
Address
rue des Nouvelles Technologies 4
4460 Grâce-Hollogne
Contact
Jean-Marc Roland
Administrateur
T: +32 4 239 04 40
Turnover
€ 9.989.000
Workforce
56
Surface Treatment
18
Bestbendwww.bestbend.com
Products
BestBend is your partner in bending metal profiles and uses
techniques that best suit your requirements..
We bend just about everything, up to very small radiuses,
with exceptional profile sections, unique products or mass
production, painted or unfinished, … We are also able to bend
aluminium, stainless steel and steel profiles with a great deal of
professional passion.
Our expertise is our greatest strength.
Key Markets
Windows & Doors, Building, Transportation, Fairs & Events,
Industry, Interior Design in Western Europe.
References
Reynaers International Belgium, Kyotec Group, Scheldebouw bv,
Goyer France, Hydro Aluminium, Permasteelisa France.
Certificate
For subcontracted coating and anodisation, BestBend works
exclusively with partners who are Qualicoat and/or
Qualanod certified.
Address
Industriepark 12 A, Zone B
2220 Heist-op-den-Berg
Contact
Rudi Vandevoordt
Managing Director
T: 015/25 72 88
Turnover
€ 1.200.000
Workforce
10 employees
Machining
Surface Treatment
Heat Treatment
19
BO-Solutionswww.bo-solutions.be
Products
BO-Solutions is a major player in the manufacturing of precision
parts for various industries. The company is highly focused
on small to medium size series aswell as prototypes and
maintenance repairs with very tight leadtimes and premium
quality demands.
Applied production techniques are 5-axis milling, turning,
grinding, lapping and honing in all metal and plastic materials.
Key Markets
Hydraulic components and motors, parts and precision tooling
for all kind of industries such as petroleum extraction, mining,
food processing, pharmaceutical industry and off-highway.
References
Poclain Hydraulics, CNH, Duracell, Husqvarna, FAM, Bekaert,
GEA, Dana, ...
Certificate
ISO 9001
Address
Zwaaikomstraat 2a
8800 Roeselare
Contact
Bart Vandepitte
Gedelegeerd bestuurder
T: +32 51 24 89 32
Workforce
20
Machining
20
Buyse Decolletagewww.buysemetalworksgroup.be
Products
Buyse Decolletage has been active as a supply company in the
metal working industry for 60 years. It is now one of the main
suppliers of repetition turnings, grinding and millings and
its customers are located in Belgium as well as abroad. The
company’s success is based on know-how, innovation and high
finishing capacity.
Key Markets
mechanical engineering, lighting, hydraulics, electronics,
pneumatics
Address
Venecolaan 11-13
9880 Aalter
Contact
Coen Buyse
Bestuurder
T: +32 9 374 17 57
Turnover
€ 11.000.000
Workforce
65
Machining
Surface Treatment
Heat Treatment
Assembly
21
By-cast nVwww.by-cast.com
Products
By-Cast is uniquely qualified to supply complete modular DEKA
air preheaters with both cast iron and glass tube banks. We can
also supply all spare parts for all existing air preheaters, with cast
iron and/or borosilicate glass tubes, any type.
Products: plates for heat-exchangers.
Key Markets
Chemical & petrochemical industry, power plants.
References
AMEC Foster Wheeler, CB&I, Kirchner, Technip, …
Certificate
ISO 9001
Address
Kanaalweg 77
3980 Tessenderlo
Contact
Patrick Bijnens
Sales Manager
T: +32 13 66 26 51
Turnover
€ 9.000.000
Workforce
45
Foundry
Assembly
22
c-mec Kortrijk nVwww.c-mec.eu
Products
Professional sheet metal and mechanical component production
C-MEC perfectly handles all the successive steps of the
production process of sheet metal and mechanical components:
cutting of sheet metal plates, punching and lasercutting,
bending, welding, powder coating, wet paint, turning, milling
and assembly. Focus is on manufacturing flexibility.
Key Markets
Industrial machines, graphical & imaging devices, electric and
electronic equipment, entrance control solutions, domestic &
office applications, logistics and packaging systems and other
innovative technical equipment.
References
Atlas Copco Airpower
Barco
Daikin
Xeikon
ATOS
Certificate
ISO9001
Address
Ringlaan 17
8501 Heule (Kortrijk)
Contact
Johan Steelandt
Sales Manager
T: +32 495 24 56 53
Turnover
€ 20.000.000
Workforce
220
Machining
Sheet Metal Work
Surface Treatment
Assembly
23
capaulwww.capaul.be
Products
Capaul masters the complete metal-cutting manufacturing of
mechanical components and complex subassemblies:
modules for aircraft engine – Guiding systems for tramways –
Subassemblies for complex medical equipment – complete
industrial installations from the procurement of raw material to
the final product. Our high technology production plants turn,
mill, grind, erode and control. High-precision CNC machining
and 5-axis simultaneous machining, till Ø 1250 x 1000mm in
a 1500m² fully air-conditioned hall. A milling center up to
6000x3500x1300mm; Ø 3500.
The new nondestructive testing line is operational since 2015.
Key Markets
Aeronautic, railway, medical industry, and Industrial Applications
References
SAFRAN GROUP – SONACA – DÜRR GROUP – EMERSON GROUP –
CMI GROUP – SESM RENK– SKF –BOMBARDIER – FAIVELEY
GROUP – TECHNICAL AIRBONE COMPONENTS – NORMA –
TRUFLO – DONCASTERS – SNCB – IBA – ASCO – ZF WINDPOWER
Certificate
ISO 9001:2008 - EN9100:2009
Address
Industriestrasse 39
4700 Eupen
Contact
Ludwig Henkes
Administrateur Délégué
T: +32 87 59 55 60
Turnover
€ 10.300.000
Workforce
65
Machining
24
cerfontaine Pierre (ateliers), SPRlwww.cerfontaine.net
Products
Mechanical machining – 45 persons
Key partner in the design and the manufacture of mechanical
parts and assemblies out of the ordinary.
More than 35 CNC machines:
- impressive dimensional capacities from 50 mm to 14000 mm;
- integrated production: cutting – welding – machining –
painting – assembling.
Key Markets
Further than key markets, we look for key partners.
We have strong long term partnerships with our major customers.
Their activities are by example in the Chemicals, Power, Energy,
Food, Space and Defence industries.
References
Major exporting companies are thrusting us, but also local SMEs
(Small and medium-sized enterprises).
Address
rue Grand’Ry 42
4860 Wegnez
Contact
Hugues Bertholet
Technical Director
T: +32 87 46 01 02
Turnover
€ 7.464.000
Workforce
45
Machining
Assembly
25
cmi maintenance hainautwww.cmigroupe.com
Products
25.000 m² workshop – member of CMI GROUPE – Preventive and
corrective maintenance – Engineering – Project management –
Rental and maintenance of shunting locomotives – Repairs
(boiler-making, recoating, machining) – Butterfly valves
and fittings – Out-sourced traction – Surface treatment and
parts cleaning – Pipe-works – Machining – Modernization of
equipments – Onsite machining – Expertise – Maintenance
engineering – Global maintenance contracts – Off & on-shore
windturbines maintenance – Iron works, …
Key Markets
Industries: Steel – Chemical – Cement – Energy – Wind energy –
Rail – Infrastructure – Mining – Papermaking – Petrochemical –
Sugar – Glassmaking – Water – Food – Iron structures, ….
References
Hundred of references in steel, glass, food, cement, energy, …
industries
Certificate
VCA – Welding agreements - …(list on request)
Address
av Georges Pirson 12
7170 Manage
Contact
Giovanni Monne
Director
T: +32 64 521 611
maintenance.hainaut@
cmigroupe.com
Turnover
€ 11.000.000
Workforce
140
Machining
Surface Treatment
Heat Treatment
Assembly
26
coatinc ninove nvwww.coatinc.com
Products
Processes as hot-dip galvanizing, high-temperature galvanizing,
powder and wet coatings as well as duplex coatings are an integral
part of our finishing range. Also centrifugal galvanizing, zinc flake
coating, passivation and anodizing of aluminum belong to our
services. The great thing about this is that we bring together the
protective features you need with processes that deliver the utmost
in visual design freedom. We offer additional services as secondary
operations, packaging, logistics, export handling and large project
management. Coatinc is a one-stop-shop for surface treatment.
Key Markets
Steel construction, Steel trade, Series, Blacksmiths, Automotive,
Transport, Solar
References
BASF, BSM Beeuwsaert, Cordeel, Dugardein-Desutter, Hollandia
Structures, Infrabel, Morti, Shell Maasvlakte, Steyaert-Heene,
Tuc Rail, Vandekerckhove, Voestalpine Sadef, Willy Naessens
Certificate
ISO 9001
EN 1090
Dast-022
Address
Pamelstraat-Oost 500
9400 Ninove
Contact
Marc Miclotte
Director
T: +32 54 32 56 56
Turnover
€ 10.900.000
Workforce
100
Surface Treatment
27
coilwww.coil.be
Products
Surface treatment: continuous anodizing of aluminium.
Key Markets
Building, design, distribution
References
Dalian Conference Center
Louvre Lens
Beekman tower
...
Certificate
ISO 9001, 14001, 50001
Address
Drukpersstraat 4
1000 Brussel
Contact
Jean Schroyen
Managing Director
T: +32 11 88 01 80
Turnover
€ 22.000.000
Workforce
125
Surface Treatment
28
combori nVwww.fabory.com
Products
Combori NV is part of the Fabory Group, a group of leading business
enterprises with over 110 locations in 15 countries worldwide. In
addition of our assortment of fasteners & C-parts, a range of A brand
tools & industrial supplies is available, as well as protection gear.
We have a team of specialists to support you in every possible way,
whether you have questions related to logistics, ICT, technology,
products or applications. These services help you to increase your
efficiency & reduce your costs of ordering, handling & stocking
materials (TCO). Fabory is best equipped to service industrial
companies who apply our fasteners in their products, but also
industrial customers who use our products for maintenance & repair
activities. Our worldwide range of Fabory Centres supply MRO-
companies & smaller production companies. We offer different VMI
solutions, to meet every customers’ need.
Key Markets
Machine building / Installation / Agricultural machinery
ReferencesADB, Arcelor, Atlas Copco, AVR, Barco, Baltimore, Daikin, DEME,
Dynaco, Novy Nexans, Picanol, Stow, Xeikon.
CertificateISO 9001:2015, ISO 14001:2015, ISO 17025:2005 A2LA.
Address
Blancefloerlaan 181
2050 Antwerpen 5
Contact
Sofie Amssoms
Sales Director
T: +32 3 210 13 73
+32 479 21 68 58
Turnover
€ 47.000.000
Workforce
Belgium: 160
29
consolidated Precision Products Belgiumwww.cppcorp.com
Products
Investment casting foundry with lost wax molding process,
producing dimensionally and metallurgically complex
components in superalloys by vacuum casting, for aeronautical
and industrial gas turbines.
Products: components for aeronautical turbines and for
industrial gas turbines
Mechanical engineering and weapon parts.
Key Markets
Aeronautics & space, armament, mechanical engineering.
Certificate
EN 9100 - NADCAP FPI - NADCAP X-ray - NADCAP Welding -
American Bureau of Shipping Certification.
Address
P.I. des Hauts Sarts
1ère Avenue 86
4040 Herstal
Contact
Paul Verhaegen
Directeur Général
T: +32 4 248 50 50
Turnover
€ 27.500.000
Workforce
150
Foundry
30
culobel nvwww.culobel.be
Products
Culobel has been offering comprehensive solutions for batch
production in the fields of sheet metal, assembly and pressure
vessels since 1928. Our deep-rooted know-how in sheet metal
stamping (500T) and deep drawing (1000T) has earned us the
confidence of numerous leading companies. While our Belgian
branch focuses on the more complex stamping and deep
drawing work, most of which makes use of advanced automation
processes, the more labour-intensive sheet metal stamping work
is carried out at our branch in the Czech Republic. This branch also
features an automated powder coating line and welding robots for
the production of pressure vessels. The technical design of our dies
is performed in house, but their construction is mostly handled by
our trading & sourcing office in China.
Key Markets
HVAC, pumps, hydraulics, light, automotive, telecom
References
Long-term partnerships with important players in our key markets
Certificate
ISO9001: 2015
PED
Address
Hekkestraat 16
9308 Hofstade (Aalst)
Contact
Steven Rottiers
Int. Business Development
Manager
T: +32 53 777 888
Turnover
€ 15.500.000
Workforce
75
Sheet Metal Work
Assembly
31
Dejondwww.dejond.com
Products
Fastening systems, non-ferrous metals (such as aluminium,
copper, brass, stainless steel, etc.) and metal based systems for
architecture and building.
Tubtara® blind rivet nuts (fastening system), inclusive worldwide
export.
Key Markets
Construction – Machine building industry - Automotive –
Building - Aerospace
References
We supply the industry, we listen, we solve technical problems.
Certificate
We supply the industry, we listen, we solve technical problems.
Address
Terbekehofdreef 55-59
2610 Wilrijk (Antwerp)
Contact
Bart Deumens
Director Sales & Operations
Fastening Systems
T: +32 3 820 34 97
Turnover
€ 27.000.000
Workforce
100
Forging
Machining
Sheet Metal Work
32
S.A. D E L H E Z t ô l e r i e
Delhezwww.delhez.be
Products
Delhez is a metal sheet factory working as a subcontractor for all
kinds of sheet metal components.
Delhez specializes in sheet metal processing: steel, stainless
steel, aluminum ... All production steps are proposed:
construction of custom parts, series production, punching,
bending, folding, straightening, laser cutting, waterjet cutting,
welding, etc..
We do not make any conception - all products are made to order
following the customer’s requirements.
Key Markets
Construction - architecture - Machinery - Industrial components
References
Mice / New Lachaussee / Wow Technology
Certificate
ISO9001 / EN1090 EXC2 (welding of aluminum until EXC2)
Address
rue Grondal 8
4890 Thimister
Contact
Christophe Delhez
Administrateur Délégué
T: +32 87 35 28 85
Workforce
26
Sheet Metal Work
33
Diametalwww.diametal.be
Products
Diametal is your partner in the production of high precision
mechanical parts in metal or technical plastics and the assembly
of mechanical sub units. Diametal specializes in the production
of single pieces or small batches on it’s CNC controlled milling,
turning, grinding and EDM machines. Starting from drawings,
sketches or examples we can fabricate a completely finished
product according to the wishes and specifications of our clients.
Diametal is a service oriented organization where flexibility and
quality are the key elements towards our clients.
Key Markets
The production of machine parts, replacement parts and repairs
for existing machines, R & D parts.
We produce for the following industries: foodprocessing,
petrochemical, biotech and pharmaceuticals, off shore,
heavy industry,...
References
Electrabel, Procter&Gamble, Mars, Mondeley, CERN, Bosch
Rexroth, BASF,...
Certificate
ISO 9001
Address
Gareelmakersstraat 10
2200 Herentals
Contact
Jan Reijnaers
Gedelegeerd Bestuurder
T: +32 14 24 99 82
Workforce
25
Machining
34
Dovrewww.dovre.be
Products
Dovre is a foundry with a proper production of cast iron stoves
and customized fire places. We also produce cast iron pieces.
As a total partner we offer a full service.
Products: Mainly parts for the heating industry, but also
mechanical castings like engine covers or pump volute chambers.
Key Markets
Heating industry, transport systems manufacturing, mechanical
engineering, agricultural industry, industrial household incineration.
Address
Nijverheidsstraat 18
2381 Weelde (Ravels)
Contact
Jef Dijckmans
Sales Manager EOM
T: +32 475 29 47 85
Turnover
€ 31.000.000
Workforce
170
Foundry
35
Dumoulin aerowww.dumoulin-aero.com
Products
In a short period, Dumoulin Aero has successfully assimilated
the quality requirements, the organizational and production
aspects and adopted the strict control requirements needed for
the manufacturing of high precision parts sub-contracted by
manufacturers such as AIRBUS, BOEING, BOMBARDIER or EMBRAER.
Today, Dumoulin Aero employs more than 40 people specifically
trained to operate modern machines and equipment and has the
capacity to perform a broad range of operations from turning-
milling and milling mostly for connection parts between Tracks
and Flaps and Tracks and Slats as well as Carriages. We have also
a strong partnership with La Nitruration Moderne (Nadcap and
required qualifications against specs) which allows us to deliver
complete treated parts (NDT, Passivation, Zn Ni, Cadmium
Plating, Painting and Ink Identification,…).
Key Markets
Aeronautic
Certificate
EN 9100
Address
rue Al Trappe 110
4432 Alleur
Contact
Geoffroy-Vincent Cammermans
CEO
T: +32 4 228 89 64
Turnover
€ 7.000.000
Workforce
45
Machining
Surface Treatment
Heat Treatment
36
Duroc n.V.www.duroc.be
ProductsDuroc N.V. is specialized in surface treatment for fasteners,
automotive components and other small metal parts. Divided in
4 different specialities: - Zinc-Flake coatings - Electroplating - (In)
Organic coatings - PTFE coatings
We increase corrosion resistance, friction properties and
chemical resistance for all kind of products.
Key MarketsAutomotive - Construction - Aerospace - Oil and gas - Wind-Energy -
Petro-chemical - Semiconductor - Furniture - Laboratory - Machinery
ReferencesAudi - BMW - Mercedes - Ford - Renault - Volvo - Opel - Philips -
ASML - Rijkswaterstaat - Caterpillar - Alstom - Fabory - Würth - Stafa -
Kobout - Eurobolt - Walraven - Fastenal - Guerry - Henschel - Heras -
Hofa - Honda - Alfa Laval - Altlas Copco - Jonckheere - Knapen trailers
- Tridec - S’Rubena - Nedcar - Nedschroef - Niko - Oil - Basco - Pelter
Pressing - Penne - Hermans - Recticel - Vergokan - Trayco - Schneider
Electric - Roxell - Samsonite - SFS - Galler - Van Hool - DAF - Grainer -
Endries - Beck-Crespel - GE General Electric - Tyco - Usin Union - Saint
Gobain - MCB - Vestas - Lisi - Agrati - Allpress - Allseas - Bosal - Bosch
- Bossard - Chicago Metallic - Crosby - Profel - Curana - GDF s’vez -
d’Hollandia - Elcee - Sikla - Sobinco - Thule - Triofast - Valeo - VDL
- Mage - ZF Windpower - Henschel - Friedberg - Bombardier - Flos
- Dejond - PGB - Unbrako - Cofely Axima - FLR - Fabriressort - Boeing
- Eriks - SFS Intec - Allseas
CertificateISO 9001-2008
Address
Moerelei 149
2610 Wilrijk (Antwerpen)
Contact
Martijn Wirken
Sales Director
T: +32 3 821 01 50
Turnover
€ 4.500.000
Workforce
28
Surface Treatment
37
emg Tilcowww.emgtilco.be
Products
Stainless steel specialist.
Prototypes, Pre-series, Parts, (Sub)assemblies
Small subcontracted series
Laser cut pieces, bended & TIG welded parts, deburring, all
kinds of surface finishing (brushed finish specialization but also
blasting, pickling, electro-polishing, coating,…)
OWN PRODUCTS: Telescopic stainless steel door made to
measure & stainless steel planters & garden accessories
Key Markets
Food machine industry (sorting, cutting, brewing,..)
Food processing (diary, brewery, meat, vegetables, fruit,…)
Access & flow control
Industrial kitchens
Pharma labs & Pharma production plants
Lift /elevator tailoring & finishing
Architects (Interior & exterior)
Construction
Airco industry & Swimming pools
References
Danone, Kone, Brewery Haacht & on demand
Address
Kruineikestraat 99
3150 Tildonk (Haacht)
Contact
Koenraad De Bruyne
CEO
T: +32 475 44 48 80
Turnover
€ 2.000.000
Workforce
20
Sheet Metal Work
Assembly
38
exel compositeswww.exelcomposites.com
Products
Exel Composites is an agile, innovative global composite
company with world-class operations providing superior
customer experience.
Building on our strengths the Company targets to exceed the
market growth.
The Company aims at being the global leader in the composite
industry based on long-term partnerships, continuous
innovations and world-class operations
Key Markets
Composite profiles for the following segments:
Transportation Industry - Building, Construction & Infrastructure -
Energy Industry - Tele-communication - Machine Industry -
Paper Industry - Electrical Industry - Cleaning & Maintenance -
Sports & Leisure - Other Industries
Certificate
ISO 9001:2008
ISO 14001:2004
Address
De Bruwaan 2
9700 Oudenaarde
Contact
Eric Moussiaux
VP Business Unit Manager
T: +32 55 33 30 11
Turnover
€ 11.000.000
Composites
39
Facim nVwww.facim.be
Products
Facim is a highly professional sheet metal company with state of
the art machinery for laser cutting, punching, welding, powder
coating, and turning, boring, threading and forming metal
materials. With 30 people Facim stands for Quality, Accuracy and
On Time Delivery. Our engineering department will advise you
on how to best design your products or needs.
Key Markets
Facim is active in a wide array of industries that need high quality
products and parts to blend into their production process.
References
Our clients are market leaders in their sector and ship their
products worldwide. The products we produce for them vary
from control panels to complex housing for electronics and
welded assemblies.
Certificate
ISO 9001
Address
Peepolderlaan 19
2910 Essen
Contact
Niko Van Goubergen
CEO
T: +32 620 13 10
Workforce
30
Sheet Metal Work
Surface Treatment
Assembly
40
w o r l d c l a s s i n t u b u l a r p r o d u c t s
Fomecowww.fomeco.be
Products
Fomeco is a World Class Manufacturer of tubular products for
exhaust, coolant, charge air & hydraulic applications, but also
structural chassis pipes. This in a diameter range of 12 up to
150mm in steel, stainless & aluminum. All main operations
are in-house such as cutting, bending, end forming, welding,
wet painting, mounting as well as a sheet metal division and a
toolshop. To be able to supply major global OEM players we have
a World Class Manufacturing System in Production, Quality &
Logistics. We also have a 100% owned sister company in Brasil
for the South American Market, a hydroform division in the
Netherlands and we have a purchase & sales office in India.
Key Markets
Truck, Bus & Off-road OEM
References
Volvo Truck & Bus - Renault Truck - Scania Truck & Bus - MAN
Truck - Daf Truck & Leyland Trucks - Daimler Truck (Mercedes) -
Hyster & Yale forklift - Atlas Copco
Certificate
ISO/TS 16949 (ISO9001) ISO14001
Address
Blokellestraat 121
8550 Zwevegem
Contact
Dimitri Withoeck
Sales Manager
T: +32 56 650618
Turnover
€ 18.000.000
Workforce
150
Sheet Metal Work
Surface Treatment
Assembly
41
Fonderie Fallais Sawww.fonderiefallais.be
Products
Aluminium foundry realizing castings with sand moulding,
gravity, pressure diecasting and rheocasting processes.
Magnesium thixomoulding.
Key Markets
Mechanical engineering, automotive, textile.
Certificate
ISO 9001:2008
Address
rue de Waremme 123, 4530
Villers-le-Bouillet
Contact
Florent Huygen
T: +32 85 27 32 76
Grégory Deliège
T: +32 85 27 33 86
Turnover
€ 5.165.931
Workforce
55
Foundry
42
Fonderies J. marichal Ketin & ciewww.mkb.be
Products
Manufacturing of cast rolls for the hot rolling of flat products. The
rolls are bi-metallic and cast using the centri-spinning process.
Products : Rolling mills.
Key Markets
Hot rolling.
Certificate
ISO 9001:2008
Address
Rue Ernest Solvay 372
4000 Sclessin (Liège)
Contact
Bernard Tilmans
Administrateur délégué
T: +32 4 234 72 02
Turnover
€ 20.512.941
Workforce
134
Foundry
43
François (etabl.)
Products
Industrial subcontracting in sheet metal work, boilerwork,
mechanically welded units, conveyor and handling machines,
automation, iron work.
Key Markets
Siderurgy and chemical Industries
References
Siderurgy and chemical Industries.
Address
rue des Commères 10
6536 Thuillies (Thuin)
Contact
Bernard Adam
Gérant
T: +32 71 53 31 49
Workforce
5
Sheet Metal Work
Assembly
44
Full metal Serviceswww.mecasyst.be
Products
Mecanic Systems, member of Full Metal Services Group,
is a subcontracting company producing goods in the sheet metal
industry from simple parts to complete subassemblies.
You have access to state of the art machines in punching,
laser and water jet cutting. Our expertise includes bending,
rolling, manual and robotized welding, assembly, surface
treatment and painting through a wide network of qualified
partners. Additionally, we offer you co-design, prototyping
and redesign-to-cost services.
Key Markets
Stoves -Access control – Pharmaceutical – Aeronautical –
Address
Avenue de l’Artisanat 12b
1420 Braine-l’Alleud
Contact
Patrick Passon
Sales Manager
T: +32 2 384 17 53
Turnover
€ 5.900.000
Workforce
35
Sheet Metal Work
Assembly
45
g.a.m. nVwww.gam-nv.be
Products
G.A.M. NV is a metalworking company focused on turning,
milling, manufacturing and machining welded assemblies as
a subcontractor.
We are specialized in machining castings and welded parts.
Our goal is to provide quality parts and a good customer service.
We have different mid-size and large CNC-machines for milling
and turning. For manufacturing and welding we have a fully
equipped workshop and several welding robots. Our hoisting
capability is up to 10 Ton.
Key Markets
We supply parts to customers in the automotive, lifting
equipment and other industries requiring quality components
produced according to the provided drawings and specifications.
References
Van Hool nv, Halliburton Energy Services, Arcomet nv, JLG
Manufacturing Europe bvba
Address
Weg naar Zwartberg 185
3660 Opglabbeek
Contact
Hubert Gabriëls
General Manager
T: +32 89 81 97 30
Turnover
€ 3.600.000
Workforce
25
Machining
Assembly
46
galva Power groupwww.galvapower.com
Products
Hot dip galvanizing and duplex systems (coating on galvanized
steel) are the first choice for corrosion protection of steel with
regard to reliability, cost, lifetime (mechanical and corrosive
resistance) and sustainability.
ZINQ®, the leading system for protection of steel against
corrosion, offers complete and integrated solutions for the most
challenging applications.
Key Markets
Steel Construction (petro chemical industry, agriculture,
parkings)
Fencing - Solar Energy - Transport (trailers) - Automotive Industry -
Agriculture vehicles - Noise barriers - Railway material.
References
BASF, Bayer, BP, Borealis, C-Tank Terminal, Oil Tanking,
ADPO, Dutch Biodiesel, Bio Wanze, Alco Bio Fuel, Gas storage
Bergermeer, Maasvlakte APMT Terminal, Infrabel, Pro Rail,
Railway station Oostende, Railway station Gent
Certificate
ISO 9001 - ISO 14001 - ISO 50001 - EN 1090
Address
Centrum Zuid 2037
3530 Houthalen
(Houthalen-Helchteren)
Contact
Jean-Louis Goderniaux
Sales and Marketing Manager
T: +32 11 51 02 34
Turnover
€ 51.000.000
Workforce
366
Surface Treatment
Assembly
47
galvaco, Sawww.weertgroep.net
Products
The specialist in protecting metals against corrosion. Hot dip
galvanising, hot dip galvannealing, passivation, coatings,
electrostatic coating, powder coating on zinc, aluminium, crude
or stainless steel.
Key Markets
Galvaco is active in the following sectors: boiler making, building
finishes, construction, industry, solar panels, road signage,
architectural structures.
References
Roadside restaurant in Verlaine, Massen shopping centre in
Luxembourg, Lux-expo Hall, Land Rover centre Luxembourg,
framework structure for the CHCR Mont Légia hospital, etc.
Certificate
ISO 1461
Address
Pele-Bois 2
4590 Ouffet
Contact
Jean-Michel Bosson
Site Manager
T: +32 86 36 65 11
Surface Treatment
48
garnimetal Sawww.garnimetal.com
ProductsGarnimetal processes sheet metal and all types of metals,
depending on what the project is meant to be used for. The
company has been active since 1924. We make a single small
metal part, a series or mounted and welded assemblies,
equipment integrating automation and electrical functions, up
to tested and installed on-site products.
Key MarketsSteel in Meca: Parts and components for machinery and
equipment (e.g., plates and various support structures in steel,
stainless steel, aluminium, copper, tantalum, housings for access
control, electrical boxes, casings ...) Steel in Care: Customized
items for the health sector in accordance with the requirements
of clean areas (e.g. stainless steel support structure for laboratory
containers, trays and racks, as well as independent external
cooling systems for medical machinery, complete bioreactors
or laminar flux hoods ...) Steel in Food: Customized items
installed in production areas, which are easy to clean and meet
the hygiene standards of the Food Industry and the Catering
sector (e.g. pie plates, funnels, stainless steel trolleys to move
chocolates ...) Steel in Life: Sets of indoor and outdoor furniture,
railings and infrastructure, building design and decorative items,
signposts and advertising support structures (e.g., bus/bike/
smoking shelters, benches, trash cans, Morris tower, advertising
ashtray, mailboxes, ...)
ReferencesIBA, GSK, Baxter, Clear Channel, Godiva, Schreder, Veolia, Steel
Address
Rue de la Wastinne 24
1301 Bierges
Contact
Nathalie Celis
Administrateur délégué
T: +32 10 41 79 04
Turnover
€ 2.500.000
Workforce
17
Sheet Metal Work
Assembly
49
gieterijen en Werkhuizen alidor claeys nVwww.al-claeys.be
Products
Iron foundry for castings in lamellar and nodular iron, mainly
focused on medium series of small pieces: series from 30 pieces
onwards; weight below 75 kg.
Delivery of full finished castings, ready for assembly.
Products: components for machines and stoves, building parts.
Key Markets
Mechanical engineering, building industry, road construction.
Address
Ruddervoordsestraat 38
8210 Zedelgem
Contact
Rik Claeys
Algemene Directie
T: +32 50 20 99 94
Workforce
40
Foundry
50
gilbos nVwww.gilbos.com
Products
Gilbos nv is your partner for machining and sheet metal parts.
This extended with a full in house paint shop that can offer both
powder coating and wet paint solutions.
Technical data available upon request
For other surface treatments, we have a network of reliable
external partners.
Key Markets
Retail, warehousing, textile, ...
References
Vodafone automotive, Agfa Graphics, Verhaerrt, Ucamco …
Certificate
IPSM15
Address
Grote Baan 10
9310 Herdersem (Aalst)
Contact
Peter De Bruyne
Subcontracting Manager
T: +32 53 78 18 78
Turnover
€ 15.000.000
Workforce
110
Machining
Sheet Metal Work
Surface Treatment
51
gondrexon nVwww.gondrexon.com
Products
Production and supply of woven wire cloth, perforated metal,
screens in polyurethane, wedge wire screens, synthetic cloth for
industrial applications, fabricated separation components, other
separation media and their related components.
Key Markets
Chemical-and petrochemical-, iron- and steel-, mining,
building- and roadwork- and paper industries, drilling
companies, food and beverage, water treatment, manufacturers
of filters and filter components, architecture.
References
On request
Certificate
ISO 9001:2008 certified
Certificate n° BE 94/1026.CA 31.12.2016
Address
Azalealaan 22
1930 Zaventem
Contact
Olivier Stas de Richelle
Sales & Marketing Director
T: +32 475 98 07 22
Turnover
€ 4.000.000
Workforce
45
Assembly
52
grauxwww.graux.be
ProductsSince 1934, GRAUX has been manufacturing and assembling parts, sub-assemblies and assemblies for industry. From the simple to the most sophisticated design, from “one-offs” to small series, everything we produce perfectly meets your specifications while respecting the requisite quality, the agreed price and the allocated delivery time.With its high qualified workforce and multi-functional machinery facilities, of recent technology, reliable, and perfectly adapted to your projects, GRAUX’s areas of expertise are as follows: Technical support (from the project conception phase), Welded construction, Mechanical welding, Boiler making, Mechanical construction, Machining, Surface treatment, Assembly, Production measures and controls.
Key MarketsGRAUX has been constructing its development by positioning itself with its customers as THE reference partner. In this respect, you are assured to find THE specialist in the construction and assembly of specialised machinery, particularly in the industries in which GRAUX has built up its reputation.These activity sectors are as follows: Food processing industry, Chemicals industry, Environment industry (renewable energies), Medical / pharmaceuticals industry, Energy industry, Iron and steel and/or metallurgical industry, Technological industry, Glass industry
ReferencesGRAUX has built its success by ensuring a very high level of customer satisfaction. We are proud to include amongst our customers certain firms of international standing, and to have done so for several decades.
CertificateISO 9001:2008, ISO 3834
Address
Zone Industrielle 3
6590 Momignies
Contact
Julien Chanteux
Responsable Commercial
T: +32 60 51 25 85
Workforce
35
Machining
Sheet Metal Work
Surface Treatment
Assembly
53
hainaut-carlier (Société nouvelle)http://users.skynet.be/hainaut.carlier
Products
Producer of hard-wearing pieces for soil working.
Tempered steel: boren steel - spring steel;
Custom-made products.
Key Markets
Agricultural
Address
Par Delà l’Eau 20
6120 Jamioulx (Ham-sur-Heure)
Contact
Eric Lefévère
Administrateur Délégué
T: +32 71 22 08 04
Turnover
€ 2.000.000
Workforce
17
Forging
Machining
Sheet Metal Work
Heat Treatment
54
heinen Sawww.heinen.eu
Products
Measure-made enclosures and cabinets in aluminium, steel and
stainless-steel.
Key Markets
Gas & Oil
Railway infrastructure
References
Elster
Infrabel
Certificate
ISO9001
VCA** certified
Address
rue d’Aix-la-Chapelle 189
4701 Kettenis (Eupen)
Contact
Marc Imetsberger
Administrateur délégué
T: +32 87 59 10 10
Turnover
€ 15.000.000
Workforce
110
Sheet Metal Work
55
hermans Verenfabriekwww.hermans-veren.com
Products
Compression springs, Tension spring, Torsion springs, Wire
shapes, Flat leaf springs, Die springs, Standard springs
Key Markets
Hermans Verenfabriek is specialized in the production of
technical springs. We offer our customer a complete package,
starting from model and design until the finished end product.
Because of the continuing investments of the last years, we are
one of the leading manufacturers of springs in wire and strip
steel, plate-work and wire shapes. Next to our specialization of
custom made springs, we also offer a variety of standard springs.
References
masters in springmaking
Certificate
ISO 9001: 2008
Address
Lange Weversstraat 53 C
9280 Lebbeke
Contact
Kris Hermans
General Manager
T: +32 52 37 25 96
Turnover
€ 3.200.000
Workforce
20
Sheet Metal Work
Springs
56
isomatexwww.isomatex.com
Products
The company ISOMATEX is the European leading producer of
enhanced volcanic rock filaments which are distributed under
the trademark FILAVA™.
FILAVA™ has high strength, high stiffness (high tensile Modulus)
and has excellent chemical resistance properties. Thanks to
its temperature range and resistance level of up to 850°C in
permanent operation, it is by far superior to glass fibers, steel
fibers, polypropylene fibers and other types of fibers. In addition
to its high-performance qualities together with other outstanding
properties (IR-rays resistance, durability etc.), FILAVA™ has
revealed superior elongation at break in combination with high
tensile strength making it a flawless substitute to aramid or
carbon fiber products in many applications.
Isomatex is not limited to the manufacturing of fibers and also
delivers a whole range of semi-finished products (Woven Fabrics,
UD, knitted fabrics, chopped fibers…)
Key Markets
Isomatex is active in the marine, the sports and leisure,
infrastructure, aerospace, construction, renewable energy
sectors and so on. Wherever performance, stiffness and lightness
are required, FILAVA™ is the first choice.
Address
rue Camille Hubert, 29
5032 Gembloux (ISNES)
Contact
Bernard Vos
Business Development Manager
T: +32 81 72 86 86
Workforce
15
Composites
57
JaegeRSOn nvwww.jaegerson.be
Products
Jaegerson is a subcontractor in the metals sector and has become
a leading supplier of plate work and welding constructions. For
over 30 years the key to our success has been extensive know-how,
high quality and great flexibility. We can offer high quality products
at competitive prices satisfying the specific needs of our most
demanding both national and international customers. With our
high tech and high performance machinery we can offer products
from laser work to welding constructions. • Laser cutting up to
20 mm into steel plate, stainless steel up to 8 mm and aluminium
up to 6 mm. • Punching up to 4 mm • Bending with CNC bending
machines for both small and large objects, observing exact
tolerances. • Welding: Robotic and semi-automatic welding, TIG-,
Spot-, Stud-welding, Gauge building • Various: Sawing, Drilling,
Tapping, Milling, Identifying, Grinding, Inserting, …
Key Markets
Agricultural and earth-moving machinery, precision
components, industrial warehouse equipment, fireplaces,
weaving equipment, thermoforming equipment, …
ReferencesCNH / Carwall / Vandewiele / Picanol / Stow / Vitalo / Metalfire/ ...
Certificate
ISO 9001
Address
Industriepark 27
8730 Beernem
Contact
Henk Jaques
General Manager
T: +32 50 79 11 35
Turnover
€ 14.000.000
Workforce
100
Machining
Sheet Metal Work
Assembly
58
Address
Provenseweg 64
8970 Poperinge
Contact
Jan-Filip Schodts
Sales Engineer
T: +31 51 23 28 00
Turnover
4 million €
consolidated 28 million €
Workforce
60
in the group 200
Sheet Metal Work
Surface Treatment
Assembly
Poperinge metal constructionwww.jonckheeresub.com
Products
Sheet metal works in steel, stainless steel and aluminium.
Air conditioning hoods, sheet metal for interiors, housings etc…
From cutting (laser/punch) to welding and folding.
Painting and completion of assemblies.
Plate thicknesses from 0,5 to 5-6mm.
For thicker plates, we work together with our sister company
JONCKHEERE subcontracting.
Key Markets
Construction Equipment and Material Handling
Rolling stock material for the Railway Industry
Compressors
Process industry
References
YANMAR Construction Equipment - ATLAS COPCO
Faiveley Transport - Delta Neu - Alstom Transport
Bombardier Transportation - NMBS - Infrabel - RATP - SNCF
Certificate
ISO 9001:2008
DIN 15085-2 welding certificate Class 1
59
JOncKheeRe subcontractingwww.jonckheeresub.com
Products
Food and beverage, clothing, energy, earthwork and
construction, agriculture, logistics and transport, air-treatment,
safety and security: in each of these domains JONCKHEERE
subcontracting is the partner of world class companies.
Key Markets
From compressors to wind turbines and from excavators to aerial
work platforms, JONCKHEERE subcontracting is present in all
domains of welded constructions.
References
Caterpillar, Atlas Copco, JLG, Liebherr, Manitou, Yanmar
Certificate
ISO 9001:2008 - EN 15085-2 - DIN 18800-7 - ISO 3834-2 - ISO 15608
CATERPILLAR MQ11005
Address
Henri Jonckheerestraat 5
8800 Roeselare
Contact
Jan-Filip Schodts
Sales
T: +32 51 23 28 00
Turnover
€ 28.000.000
Workforce
200
Sheet Metal Work
Surface Treatment
Assembly
60
Kanigen Works Beneluxwww.kanigen.be
Products
Surface treatment: electroless nickel plating according to the
Kanigen process.
- Kanigen electroless nickel - Hard electroless nickel - Amagnetic
electroless nickel - Diffusion electroless nickel - Electroless nickel
with PTFE - Black electroless nickel
Key Markets
Automotive 45%; Semi-conductor 20%, Offshore 12%, Hydraulics
8%, Compressors and pneumatics 8%, Industrial Vehicels,
Textile, Special Machines, Defence, ... .
References
Automotive: Continental, TRW, Bosch, Jtekt, Thule, Hilite,
Hitachi, Borg Warner, Thomas Magnete, Valeo, ZF, Gates, ... .
Semi-conductor: ASML, Applied Materials, ... .
Other references: Atlas Copco, Compair, Dresser-Rand, Eaton,
Bosch Rexroth, Haliburton, Technip, Cameron, Saft, Parker,
Staübli, Schneider, ... .
Certificate
ISO9001:2008
Address
Wolfsbergstraat 57
3600 Genk
Contact
Mark Decker
Technical Sales Manager Kanigen
Group
T: +32 472 970 580
Turnover
€ 5.000.000
Workforce
40
Surface Treatment
61
Kautex Textron Benelux
Products
Manufacturer of plastic fuel tanks for the automotive industry.
Key Markets
The automotive industry.
References
Supplier to Volvo, Ford, Renault, Mercedes and Opel.
Certificate
BS OHSAS 18001, ISO/TS 16949, ISO 14001
Address
Havenlaan 12
3980 Tessenderlo
Contact
Jan Lodewijckx
Director Operations
T: +32 13 61 00 80
Turnover
€ 107.100.000
Workforce
250
Assembly
62
Komec helsen nVwww.komec.be
Products
Komec Helsen’s expertise, flexibility and proven ability in design,
development and manufacture of components through sub-
assemblies to complete machine construction have earned us
an enviable reputation for consistently delivering: “The Komec
quality, Our Worldwide Standard”.
Our strategy of ceaseless investment in the very latest
production technologies allows us to maintain the highest
standards whichever materials we work with: ferrous, non-
ferrous, engineering plastics. Furthermore, a motivated and
well-trained workforce underpins our rigorous and systematic
approach to satisfying our clients’ requirements. The list of our
clients includes a number of world-renowned multinational
corporations all of whom have come to value KOMEC:
Knowledge, Organization, Manufacturing, Efficiency as well as
Communication based on our mission to support our partners
on their road to creation, innovation and change driven by
reliability & honesty.
Key Markets
Pharmaceutical - Automotive - Digital Printing-Product Development.
Certificate
ISO9001/2008
Address
Kernenergiestraat 79
2610 Wilrijk (Antwerpen)
Contact
Werner Helsen
Managing Director
T: +32 3 820 70 50
Turnover
€ 12.600.000
Workforce
44
Machining
Sheet Metal Work
Assembly
63
WWW.LAMIFIL.BE
lamifil nvwww.lamifil.be
Products
Excellence is at the core of our business. We innovate, design
and manufacture overhead conductors, catenary wires and
specialty wires in both copper and aluminium, and their alloys,
to deliver the highest value to our clients.
We strongly promote products that increase energy efficiency.
Our developments contribute to a reduction of CO2 and the
creation of a sustainable energy future.
Key Markets
Power Transmission & Power Distribution
Railway & Urban transport
Automotive, Aviation and Aerospace
Steel Industry
Consumer Goods
Telecommunications
ReferencesWorldwide TSO’s and DSO’s
Worldwide railway infrastructure managing companies
Automotive: different tier two suppliers
Electrical power cable manufacturing plants
CertificateISO 9001
ISO 14001
Address
Frederic Sheidlaan
2620 Hemiksem
Contact
Turnover
€ 125.000.000
Workforce
220
64
les aciéries de la meuse Sa
Products
Bullets, crushing & dredging parts, crushers, armour-platings.
Products: pump components, stampers, grabs and cones for
crushing, armour-platings, railway parts.
Key Markets
Quarries, mines, recycling industry, recycling of concrete and
asphalt for road construction. Plants treating seeds for oil
production.
Address
rue Mathieu Steenebrugen 3
4602 Cheratte
Contact
Christophe Charlier
Service du Personnel
T: +32 4 361 76 17
Workforce
20
Foundry
65
lithcote europe Sawww.lithcote.com
ProductsLithcote Europe is specialized in the application of anti- corrosion,
anti-adhesive Teflon and anti-wear coatings based on special
polymers on all types of supports. Our know-how allow us to
advise our clients on the best coating to apply depending on their
particular service conditions. We treat parts of all sizes, ranging from
precision joints for the aerospace industry to tanks and reactors of
over 50 tons. We offer a variety of treatment processes for metals as a
subcontractor for the chemicals industry, food chain stores, precision
engineering, the construction of household electrical appliances,
maritime and road transport. Protective coatings are applied on
all kinds of metals: tanks needed for transport of high corrosive
products, other precision parts, etc. Each treatment undergoes a well-
researched cycle: parts are degreased by pyrolysis, sandblasted with
corrund and covered with different layers of reinforced powder which
are fused by baking. For anti-corrosion the products Halar, Heresite,
Rilsan, PVDF and Chemflake are used. They offer protection against
corrosion by products with pH ranging from 1 to 14 and for various
temperatures in use, up to 270°C.
Key MarketsAll kind of industry: transport, chemical, pharma, aeronautics,
manufacturing, alimentation, etc…
ReferencesBaxter, UCB, L’oreal, Caterpilar, Ferrari, Techspace Aero, Sabca,
Sonaca, Carrier, Eurotainer, Eurasia, Electrabel, Elia, Fluxys, …
CertificateVCA, ISO 9001
Address
Rue du Château 70
6183 Trazegnies
Contact
Christophe Leclercq
CEO
T: +32 71 45 00 15
Turnover
€ 2.000.000
Workforce
15
Surface Treatment
66
longrée (nouvelles Forges)www.forges-longree.be
Products
Les Nouvelles Forges Longrée are able to offer their customers
the forging, rough or machined completely tailored to each
industry and each type of construction. Currently, we are forging
steels of all grades, in all sections of up to 800 kgs weight.
Key Markets
Mechanical workshops
References
- Hertecant
- Truflo Rona
- AK Steel International
- ArcelorMittal
Certificate
ISO 9001: 2008
Address
rue Marihaye 20
4400 Flémalle-Grande (Flémalle)
Contact
Ludwig Billen
Administrateur Délégué
T: +32 4 234 32 94
Turnover
€ 593.447
Workforce
8
Forging
67
ma Precision mechanicswww.m-a.be
ProductsMA Precision Mechanics is a family company with more than 30 years of experience in the subcontracting of precision mechanical parts, tools, special cutting tools and mechatronical systems.With customers in the medical devices, pharmaceutical, nuclear, aviation-, machine building, engineering and other industries, we have accumulated over the years, a broad knowledge of machining and assembly.Digital Assisted Manufacturing, the extensive use of digital techniques like ERP-CAD/CAM-DNC-CNC, lead to competencies in terms of complexity of operations and project management.This enables high-end flexible subcontracting.The mechanical precision parts are prepared on our CAD-CAM system by highly skilled engineers and then machined on the CNC milling, turning and millturn machines.Besides our machining capacity, MA Precision Mechanics offers you the knowledge and over 30 years of experience of a team of highly skilled workers and specialists in the machining of simple to highly complex parts. Vertically to five axis simultaneous milling has no secrets for us. Single pieces to small series with repetitive nature are our market.On the other hand, our ERP system is again the perfect support for the production of assemblies, from the purchase of our raw materials and standard parts, as well as the production with our CNC machines Until the assembly and delivery, everything is managed within the ERP system.
Key MarketsMachinery, food, aerospace, medical devices, pharmaceutical, nuclear, machine construction, machine tools, chemical, petrochemical
ReferencesASCO industries, Agfa Gevaert, JBT, Siemens, GEA group
CertificateObtaining ISO 13485
Address
Dubbeekstraat 112
3200 Aarschot
Contact
André Thys
Zaakvoerder
T: +32 16 56 98 21
Turnover
€ 1.000.000
Workforce
10
Machining
Assembly
68
magolux Sawww.magotteaux.com
Products
Magolux is part of the Magotteaux group. We are a foundry
specialized in wear-resistant castings. High-tech products aimed
at cement manufacturers and the sludging industry.
Products: dredging pump components, crushing boulders.
Key Markets
Cement industry, power stations, dredging industry, mines, fluids.
Certificate
ISO 9001, ISO 14001 and OHSAS 18001
Address
rue de la Hart 2
6780 Messancy
Contact
Anne-Marie Thoma
Assistante de direction
T: +32 63 38 28 11
anne-marie.thoma@
magotteaux.com
Turnover
€ 16.525.000
Workforce
85
Foundry
69
magotteaux liège Sawww.magotteaux.com
Products
Magotteaux is a group of foundries, global leader in its area. Our
local teams are present all over the world.
We develop, manufacture and distribute crushing and wearing
parts. We supply services to the following industries: cement,
mines, quarries & recycling, thermal power stations and dredging.
We are experts in the production process of our customers, in
wear, in comminution and in recovery of ores with added value.
We help our customers to optimize their production costs.
Products: bullets, crushing & dredging parts, crushers,
armour-platings.
Key Markets
Agregates & recycling industry, mines, cement industry, thermal
power stations, dredging industry.
Certificate
Agregates & recycling industry, mines, cement industry, thermal
power stations, dredging industry.
Address
rue Prés de la Tour 55
4051 Vaux-sous-Chèvremont
(Chaudfontaine)
Contact
Thierry Ducoffe
Plant Manager
T: +32 4 361 75 25
Turnover
€ 66.225.435
Workforce
315
Foundry
70
malcourant mécaniquewww.malcourant-mecanique.be
Products
Turning
Milling
Mechanical engineering
Key Markets
Automotive, pharmaceutical industry, environment, food
References
JTEKT - Vandemoortele - GSK - Baxter
Certificate
ISO 9001-2015
Address
rue de la Marcelle 1-3
5030 Gembloux
Contact
Patrick Powis
Sales Manager
T: +32 498 126 500
Turnover
€ 1.200.000
Workforce
10
Machining
71
marcel Verfaillie-leroy BVBawww.verfaillie-leroy.be
Products
Verfaillie has a modern powder coating installation with on site
pretreatment.
As pretreatment, we can sandblast the metal and metalize it or
apply a chemical pretreatment.
We are able to powder coat aluminum, galvanized steel and
black steel.
Key Markets
Powder coating, sandblasting, chemical pretreatment
References
Industrial applications as well as automobile
Address
Werviksestraat 94
8902 Zillebeke Ieper
Contact
Niko Vanwalleghem
Production Manager
T: +32 57 22 36 16
Turnover
€ 1.200.000
Workforce
11
Surface Treatment
72
mecaSOFT Sawww.mecasoft.be
Products
MECASOFT is a subcontractor specialized in EDM technologies for
high precision and complex components.
MECASOFT has a department of micro machining
(3D pieces of 50µ - micro holes of 15µ)
Key Markets
Aeronautic and aerospace
Medical and pharmaceutical industries
Research centre - Universities
Mechanical industries
References
Airbus/Embraer/Bombardier
GSK/UCB/Solvay
CERN/ESA
Certificate
EN9100
Address
rue de la Molignée 60
5537 Anhée
Contact
Raymond Brandt
Administrateur
T: +32 82 61 16 12
Turnover
€ 2.000.000
Workforce
15
Machining
73
mecaspringwww.mecaspring.be
Products
Precision springs in wire and flat strip (compression, traction,
torsion and customer shaped springs). Precision mechanics
welding (assemblies, sub assemblies). Customer made
manufacturer. Accredited supplier for Aeronautics, Space and
Automotive engineering design. ISO 9001:2008 and EN 9100:2009.
Key Markets
We work in true partnership with customers coming from the
most varied fields as defence, automotive, electric household
appliances, lights, valves, gas, hydrogen …
References
Safran group, FN, etc …
Certificate
Our company is ISO 9001:2008 and EN 9100:2009 certified.
Address
Prolongement de l’Abbaye 86
4040 Herstal
Contact
Mr O. Wattiaux & J. Boden
Sales & Marketing Manager
T: +32 4 240 55 70
Turnover
€ 7.400.000
Workforce
71
Machining
Springs
74
mekanische Konstruktie Baudoinwww.eriks.be
ProductsMekanische Konstruktie Baudoin (MKB), a specialized workshop
in mechanical operations, is already 90 year a loyal partner of
the industry business and makes part of the ERIKS group.
MKB is specialized in:
• Manufacturing of components and spare parts
• Repairing spare parts and machinery
• Equipment- and machinery construction
• Engineering and development
Key MarketsPrimary industry (steel/ non-ferro)
Pharmaceutical
Chemicals
Nuclear
Energy
Food
ReferencesNyrstar, Aperam, Metallo Chimique, Arcelor Mittal, Aleris,
Janssen Pharmaceutica, Ajinomoto, BP, BASF, Transnubel,
ZF Wind, EON, Visko Teepak, Mars, …
CertificateVCA*, ISO 9001
Address
Ambachtsstraat 10
2400 Mol
Contact
Rudi Janssen
Operational Manager
T: +32 14 34 64 20
Turnover
€ 7.000.000
Workforce
57
Machining
Assembly
75
metagra industrywww.metagra-industry.com
Products
Manufacturer of printed, mechanically worked and anodized
custom made industrial products in metal, plastic and glass.
Frontpanels, operating panels, bezels and complete housings.
Name- and type plates, industrial logo’s, signs, labels
and identification.
Key Markets
Electronics, constructors, test and measurement devices, domotics,
lighting industry, medical sector, banking, (tele)communication,
“white products” (washing machines,…), automotive, …
Certificate
ISO 9001
Address
Industriepark Drongen 11
9031 Drongen - Gent
Contact
Danny Marquenie
Sales manager
T: +32 9 280 93 10
Turnover
€ 4.000.000
Workforce
40
Sheet Metal Work
Surface Treatment
Assembly
76
metakor nVwww.metakor.com
ProductsMetakor, settled in Kortrijk (Belgium), is one of the leading
European designers and manufacturers of decorative furniture
fittings in rustic, traditional and modern style. Since 2013, a new
product line in authentic style has been added to the range, as
well as a modern concept, called screw on trim handle.
The company’s mission is based on continuously creating and
developing new and exclusive products in cooperation with a
team of international designers. Metakor exports to more than
30 countries worldwide. This gives Metakor a large spectrum on
trends and markets, and the necessary input for a product range
with an universal look and charisma. Thanks to frequent and
intense customer contacts, Metakor pays a lot of attention to
niche products which fill in their specific needs. Through a long
lasting production experience, the quality level of these products
is outstanding while their price level stays competitive.
Key MarketsMetakor trades its products lines to almost all important
furniture and kitchen manufacturers in Europe and many other
countries such as Turkey, Russia, USA, South Africa, Australia and
New Zealand. Our international sales team also collaborates
with many wholesalers in each of these countries and through
its own commercial branch in Spain.
ReferencesDovy Keukens Belgium, Bruynzeel Keukens the Netherlands, Nobilia
Germany, Alinéa France, J&J Ormerod UK, Stylny Kuchny Russia,
Aquaton Russia, Molodechnomebel Belarus, Lineadekor Turkey, …
Address
Industrielaan 8
8501 Heule (Kortrijk)
Contact
Patrick Van Neste
Commercial Director
T: +32 56 36 39 70
Turnover
€ 5.500.000
Workforce
28
Foundry
Surface Treatment
Assembly
77
métaux emboutis Sawww.metauxemboutis.be
Products
Since 1924, METAUX EMBOUTIS is a subcontractor in sheet metal
work. Presses, tools workshop, punches, laser cutting machines,
spark erosion machines (sinking or wire), mechanical and
hydraulic presses for all tonnages, etc. in an entity which today
extends over more than 6,000 m².
6 trading sectors: • Laser Cutting • Punching • CNC Folding •
Welding • Cutting - Stamping • Assembly
Key Markets
Electrical and electronic equipment, construction and mining
equipment, power solutions, armament, aerospace, medical sector.
References
ABB - Areva - Caterpillar - CE+T - CE+T Technics - FN Herstal -
General Electric - Schneider - Schreder - Tenneco (Monroe) -
Volvo ...and a lot of SME’s from various sectors
Certificate
ISO 9001:2008
Caterpillar SQE-MQ11005
EN9100:2009 in progress.
Address
Rue Haute Marexhe 176
4040 Herstal
Contact
Christine Rosemboom
Administrateur Délégué
T: +32 4 248 08 28
Turnover
€ 3.000.000
Workforce
22
Sheet Metal Work
Assembly
78
mockel agwww.mockel-precision.be
Products
Mechanical processing for highly complex components
• High mix – wide variety
• Low volume – batch from 10-10.000parts per year
• High complexity – high level of complexity
One stop shop: Mockel take care of the whole supply-chain for
the customer (purchase material, turning, milling, finishing,
network of suppliers for heat- and surface treatment, assembly)
Key Markets
Defence, aerospace, machine construction, medical devices
References
FN Group, Thales Alenia, Safran Aero Boosters, CMI, ASCO,
SABCA, MOOG
Certificate
ISO 9001:2008/ EN 9100:2009/ ISO 13485: 2012
Address
rue du Développement 9
4837 Baelen (Lg.)
Contact
Annabelle Mockel
COO
T: +32 87 59 39 59
Turnover
€ 6.000.000
Workforce
55
Machining
Surface Treatment
Heat Treatment
Assembly
79
multi Services Découpewww.msdecoupe.com
Products
Fixing clamps and bands for building.
Accessories for packaging.
Key Markets
Building
Packaging
References
Grossistes et revendeurs
Address
rue des Fauldeurs 6
6530 Thuin
Contact
Christelle Salengros
Directrice opérationnelle
T: +32 71 59 75 75
Workforce
15
Sheet Metal Work
80
Oerlikon Balzers coating Benelux nVwww.oerlikon.com/balzers/be
ProductsOerlikon Balzers is a global supplier of PVD coatings which improve
the performance and service lives of cutting, metalworking and
plastics processing tools as well as precision components. These
proprietary coatings, developed by Oerlikon Balzers and marketed
under the BALINIT® and BALIQ brand, are extremely thin, smooth,
harder than steel and lead to a decisive reduction in friction and wear.
Online coating-guide is available. This guide enables the users
to determine the right coating for his specific application:
www.coating-guide.balzers.com
- Latest developed coatings like: BALINIT® DYLYN, BALINIT®
CROMA PLUS, BALINIT® FORMERA are now available.
- Full range of BALINIT® DIAMOND MICRO or NANO coating
dedicated for graphite/composite machining, short delivery time.
- New weekly extra coating solutions in Benelux: a high-end post
treatment of your cutting tool coatings, pre- and postpolishing
and/ or advanced service for punching and forming tools.
Key MarketsCutting – Punching & Forming tools, Automotive, Aerospace,
Precision Components
ReferencesCutting – Punching & Forming tools, Automotive, Aerospace,
Precision Components
Certificate
ISO9001, NADCAP (Luxembourg).
Address
Schurhovenveld 4050
3800 Sint-Truiden
Contact
Georges Volders
Director Sales & Operations
T: +32 11 69 30 40
Workforce
41
Surface Treatment
81
Olsen engineeringwww.olsen-engineering.be
Products
Design, manufacturing, assembly and commissioning of lifting
devices (cranes, jib cranes, monorails, trolleys, hoists, lifting
beams, standard or specific lifting accessories, etc).
Maintenance, servicing and repairs on all brands.
New specialized equipment brands DEMAG and Verlinde.
Key Markets
A.I.D.E
S.N.C.B.
Degremont
References
Techspace Aéro
FN Herstal
SCA Hygiene Paper
Fonderies
Câbleries
Arcelor
ASCO
Electrabel
VCA
Address
route Zénobe Gramme 39
4821 Andrimont
Contact
Paul Geron
Gérant Manager
T: +32 87 32 59 60
Turnover
€ 3.100.000
Workforce
19
Assembly
82
Omco internationalwww.omcomould.com
Products
With six factories strategically positioned in line with our
customer demands, supported by our own two modern
foundries and competence centre at our headquarters in
Belgium, Omco is producing glass moulds and mould parts to
serve the glass container industry worldwide.
The fruit of our investments has kept Omco in place as one of the
biggest and world’s leading commercial mould manufactures.
Key Markets
Omco is active in the Glass container industry worldwide. We are
supplying glass factories that are producing glass containers for
foods, beers, beverage, spirits, medicine, cosmetics etc.
References
OI / ARDAGH / VERALIA / SICECAM / VETROPACK / BA VIDRO /
VIDRALA
Certificate
ISO 9001
Address
Venecolaan 10
9880 Aalter
Contact
Yves Mortier
International Sales Manager
T: +32 473 97 39 40
Turnover
€ 120.000.000
Workforce
1200
Foundry
Machining
83
Address
Zwaarveld 20
9220 Hamme
Contact
Jan De Mey
Plant Manager
T: +32 52 49 93 50
Turnover
€ 13.000.000
Workforce
75
Foundry
Omco metalswww.omcometals.com
Products
Omco’s technology is designed to offer our customers maximum
flexibility with a good quality.
We also offer customers a variety of materials and applications.
We produce engine and compressor components, agricultural
equipment, mechanical engineering parts.
Key Markets
Our foundry supplies mainly the autotomotive and mechanical
engineering industries.
We export to England, the Netherlands, France and Germany.
References
Cummens, Liebherr, Atlas Copco
Certificate
ISO/TS 16949
84
OSg-DaViD grinding serviceswww.precdavid.be
Products
OSG DAVID Grinding services is currently one of the most
advanced CNC tool grinding shop.
- Development, grinding and realization of you milling, drilling
and sawing application. From standard to special / profiled tools
according to you specifications.
- Detailed measurement reports. Specified Coated tools to
optimize cutting time. Producing and regrinding
- Shear blades up to 6000 mm
- Regrinding Bending Tools
- Surface grinding: 4000 x 650 – 6000 x 350 mm.
- Specials and profile tools are measured to guarantee 100%
quality control. This by a 4-axis CNC-controlled measuring
machines.
Key Markets
Aeronautic – space – automotive – food – medical – textile –
mechanical engineering – carbide wearing parts – ….
References
on demand
Certificate
on demand
Address
Heirweg 82-84
8520 Kuurne
Contact
Carl David
Plant Manager
T: +32 56 37 26 46
Workforce
19
Machining
85
Packo inox Surface Treatmentwww.electropolish.be
Products
Packo Surface Treatment offers a wide range of Surface
Treatments for Stainless Steel such as: electropolishing;
mechanical polishing; micro-undulation; pickling and
passivation; ceramic blasting; chemical deblackening; non-
fingerprint treatment; hygienical, sterile and pharmaceutical
finish; anti-bacterial finish, amorphisation; mirror polish;
deburring and micro-deburring; hardening and non-fretting;
non-stick; derouging; repair and refurbishment; custom made
solutions; advise and consulting; …
Key Markets
Construction, architecture, furniture, design, pharmaceutical,
food, dairy, chemistry, automotive, railway, aviation, vacuum,
clean room, micro-electronics, semi-conductor, …
References
NMBS-Infrabel, Lotus Bakeries, Pepsi, Pfizer, Johnson-Janssen
Pharmaceutica, Monsanto, Dupont, Ford, Volvo, Deceuninck, ...
Certificate
ISO 9001, EHEDG, 3A
Address
Cardijnlaan 10
8600 Diksmuide
Contact
Marc Quaghebeur
Manager Surface Treatment
Division
T: +32 51 51 92 80
Workforce
120
Surface Treatment
86
Paumelles liègeoiseswww.paumelles-liegeoises.com
Products
We would like to present you our weld on hinges range which
we think might interest you. All dimensions are available in
steel, stainless steel (304), food quality stainless steel (316L)
and aluminium. Well known internationally, our hinge is used
in hardware shops, ironworks, automobile and naval sectors,
security, food sector … We are very proud to show you at the
same time a number of items out of our range « customer
design » articles. These of course specifically in the intention
to assist you to the maximum with your specific customer
projects. Our experience and know how are at your service for
your creations. Our Highlights: Very quick deliveries, Expedition
of your specific need at a certain moment, Customer designed
articles, A tailored service to your demand
Key Markets
Hinge, weld on hinge, steel, stainless steel 304, stainless steel
316XL, aluminum
Address
Hauts Sarts, 4ème Avenue 5
4040 Herstal
Contact
Nathalie Morelle
T: +3243434323
Turnover
€ 850.000
Workforce
10
Machining
Sheet Metal Work
Assembly
87
Pedeo nVwww.pedeo.be
Products
Technical parts with high added value (machined, painted,
and assembled).
Full Service Diecasting – Subcontracting. Die casting expert
specialised in finished and assembled zinc and aluminium
wdie castings.
Key Markets
Building and lighting sectors, mechanical engineering,
automotive, electronics and electricity.
Certificate
ISO 9001:2008
Address
Westerring 25
9700 Oudenaarde
Contact
Piet D’Haeyer
Managing Director
T: +32 55 33 58 80
Turnover
€ 6.785.000
Workforce
60
Foundry
88
Pegard Producticswww.pegard.com
Products
Pegard is active in the machine-tool business for more than
50 years and became well-known in the whole industrial world
for its large and precise horizontal boring and milling machines.
Pegard is specialized in the Machining of high accuracy parts
of medium or large sizes on our boring and milling machines,
vertical turning lathes and grinding machines. Pegard is also
your partner in the revamping of large horizontal boring and
milling machines, machining centers and vertical turning lathes,
committed to quality and performance.
Key Markets
Large mechanical parts, such as turbine rotors, valves, pumps,
engine blocks, compressor housings, components for earth
moving equipment.
References
ArcelorMittal, Safran, IBA, CMI, General Electric, Caterpillar,
Coexpair, Magolux
Address
avenue Reine Elisabeth 59
5300 Andenne
Contact
Gautier Bolle
Operations Director
T: +32 85 84 99 53
Turnover
€ 2.900.000
Workforce
20
Machining
Assembly
89
Polyworks conceptswww.polyworksconcepts.be
Products
Polyworks Concepts is specialized in the design and production
of any part of composite materials: polyester reinforced with
glass fibers. Production by simultaneous spraying of fibers and
resin, also with the RTM light system.
Factory involved in the automotive industry, wastewater
treatment, and all decorative cladding,...
Address
rue Martinroux 22/78 F
6220 Fleurus
Contact
Olivier Vandeneynde
Executive Director
T: +32 71 81 88 28
Composites
90
Pour Demain aSBl eTa 125 - le Val du geerwww.valdugeer.be
Products
The “Val du Geer” is an adapted work company (ETA), which
found its origins in a nonprofit organization created in 1964,
employing about 230 persons with mental and physical
disabilities. Equipped with powerful machines, we work all types
of steels such as carbon steel, galvanized steel, stainless steel,
aluminum and so on. We work the sheet of metal, but also the
tube in all these material. Cutting, punching, welding, bending
and painting, are some of our skills. We have, for example,
4 bending presses (3 meters long) and one CNC punching
machine. Customer-oriented, we work in synergy with them to
offer the most complete service. The Val du Geer is also:
the woodworking (pallet repair, manufacturing pallet, logistics),
hospital and pharmaceutic packaging, serigraphy and
finally sewing
Key Markets
Bending / Welding / Sawing / Punching
References
SAFRAN Aéro Booster / Ateliers François / Icopal
Certificate
ISO 9001: 2008
Address
rue des Français 68
4430 Ans
Contact
Xavier Dony
Technico-commercial
T: +32 491 612 807
Turnover
€ 1.521.333
Workforce
41
Sheet Metal Work
Assembly
91
Prakto - Theo laureys nvwww.prakto.be
Products
PRAKTO is Belgian manufacturer of pressure tanks, compressed
air vessels, vacuum and steam tanks. LPG tanks (propane butane)
& gas cylinders for automotive (cars, forklift trucks, boats), for
heating / gas appliances: campers & caravans, mobile catering
vehicles, weed burners and other related gas applications. Diverse
steel constructions. Standard as tailor made productions. LPG
spare parts & equipment. Pressure tanks according to 2009/105/
EC, PED. LPG tank & equipment to CE,TPED, UN-67R01 regulations.
PRAKTO is the only Belgian producer for these gas tanks.
Key Markets
Industrial and technical service companies. Compressor / air
pressure market. Forklift truck producers and distributors.
Automotive business. Camper & caravan producers, wholesalers
& dealers. Gas companies.
References
Arcelor Mittal, Armstrong International, Brakel Aero, B-Close
Colruyt, GEA, Geveke, Norgren, Jungheinrich, Kärcher, Kosan
Gas, Rotarex, Toyota Material Handling, TVH
Address
Langestraat 104
9280 Lebbeke
Contact
Hans Laureys
Manager - Administrator
T: +32 52 41 05 17
Sheet Metal Work
Surface Treatment
Assembly
92
®
PRecimeTal caSTingSwww.precimetal.com
Products
Investment casting foundry with lost wax moulding process
for the manufacturing of complex steel and stainless steel
components.
Products: all mechanical components needing dimensional
accuracy and/or specific surface condition, with or without
machining and surface treatments.
Key Markets
Aerospace, Defense, Mechanical Engineering, Medical,…
Export to: France, Netherlands, Germany, Spain, Poland, China,
India,…
References
AIRBUS – SAFRAN – FN HERSTAL
Certificate
EN 9100 – ISO 9001 – NADCAP
Address
Chaussée de Mons 89, PI
7180 Seneffe
Contact
Edward Rabendski
Sales Manager
T: +32 64 52 20 03
Turnover
€ 15.000.000
Workforce
125
Foundry
Machining
Surface Treatment
Heat Treatment
93
Precision metals eUwww.precision-metals.be
Products
With a 4.5522 m³ warehouse, we are able to stock a wide
selection of material ready for processing or dispatch. Available
in Pancake, Traverse Wound, Spool Wound, Cut Length,
for our full range or bespoke materials, please contact our
knowledgeable sales team to discuss your requirements.
Standard Stocked Range Stainless Steel: 300 series including:
304, 304L, 305, 309, 310S, 316, 316L, 320, 321, 347, 400 Series
including 401, 420, 430, 904L, Duplex & Super Duplex and more.
Low Carbon Mild Steel: DC01, DC02, DC03, DC04, DC05, DC06.
Carbon steels: C55S, C60S, C67S, C75S, C85S, C90S, C100S, C125S,
48Si7, 56 Si7 Copper and its alloys: CuSn6, CuSn5, CuZn20 Nickel
and Nickel Alloys: Alloy 200, 201, 400, 600, 625, 718, 750, 800,
825, C276, C4 Titanium Strip: Grade 1 and 2 Aluminium: 1000,
2000, 3000, 4000, 5000, 6000, 7000, 8000 series.
All materials in strip, sheet, narrow strip, wire and shaped wire.
Key Markets
Precision Strip Metal Processing and Supply
Certificate• BS EN ISO 9001 2008: AS9120 REV A: Registration No. FM 02114
• Rolls-Royce: Approval No. 01679
• Rolls-Royce Deutschland Ltd: Approval No. 118990/02
• BAE Systems Regional Aircraft: Approval No.
Address
Mechelen Noord (D)
Wayenborstraat 25
2800 Mechelen
Contact
Stef Florenty
General Manager
T: +32 15 44 89 89
Workforce
11
Steel Service center
94
Provanwww.provan.be
Products
Provan is the ideal B2B partner for supplying a total range of
metalworking services. Thanks to the right technology, the
necessary know-how, and 18 years of experience in the metal
industry, Provan has emerged as a trend-setting supplier, from
sheet, tube and profile machining, welding operations, to
partial and full assembly. Provan offers constructions in steel,
aluminium or stainless steel. We focus on total solutions and aim
to maintain a long-term relationship with all our customers.
Provan differentiates itself by a strong focus on QRM (Quick
Response Manufacturing) whereby our partners benefit from a
TCO reduction. Beginning of 2016, Provan started a 2nd affiliate
in Czech Republic with an in-house coating line.
Key MarketsOur total solutions can be found in a wide variety of industries,
including medical, automotive, agriculture, heating, machinery …
We are active in the BeNeLux, France, Germany and developing
our activities in the rest of Europe.
ReferencesGymna Uniphy, Stûv, Lely Industries, Daf, Graco
CertificateWinner of “Factory of the future 2015, Nomination “Industrie Awards
2014”, Trends Gazellen 2011, ISO 9001: 2008, EN1090, EN15085
Address
Troisdorflaan 22
3600 Genk
Contact
Guy Rooman
Business Development Manager
T: +32 89 30 77 12
Turnover
€ 10.000.000
Workforce
75
Sheet Metal Work
Assembly
95
Punch metalswww.punchmetals.com
Products
PUNCH METALS is a subcontractor for the automotive, Truck,
Beverage and main Industry.
We are specialised in the manufacturing from easy until complex
metal products, sub-assemblies as well final assemblies.
Punch Metals assist their customers with design, prototyping,
production, assembling and testing. For this we have a
multidisciplinary team available for the customer needs.
We are focussing on customer satisfaction with an excellent
price/quality-level.
Technologies that we are using for this are:
- Metal forming by Pressing:
- Hydraulic presses till 1000 Ton.
- Mechanical presses till 630 Ton.
- Cutting by pressing, punching, 2D- and 3D-lasercutting.
- Assembling by: conventional-, spot- and laser-welding.
Key Markets- Automotive- and truck Industry.
- Off road and Agro
- Beverage systems
- Main Industry
CertificateISO 9001 - ISO/TS 16949 - ISO 14001
Address
Nobelstraat 2
3930 Hamont-Achel
Contact
Peter Vandenberk
Director
T: +32 11 399 300
peter.vandenberk@
punchmetals.com
Turnover
€ 17.000.000
Workforce
117
Sheet Metal Work
Assembly
96
Raytech bvbawww.raytech.be
Products
For more than 25 years Raytech is carrying out laser activities (cutting,
welding and engraving) as a subcontractor. Raytech profiles itself as
a subcontractor for extreme fine laser cutting and laser welding.
We are specialized in cutting micro components and very fine
stainless steel plate (thickness starting from 0.025mm) with high
precision. Typical examples are shims, fine leaf springs, medical
stents, skeletal anchorages, micro metal filters. We also offer 3D
metal printing, mainly in titanium.
We have developed strategic and technological cooperation with
R&D departments of many companies. Due to our expertise, know-
how and enthusiasm we offer innovative solutions for your products.
Key Markets
We serve customers in many different industries, such as
medical, precision, watch, eyewear, automotive aero and
defence, industrial seals & springs, electronic, jewellery, etc.
References
Barco, Bekaert, Atlas Copco, Packo, CNH, Picanol, Theo Eyewear,
Summa, …
Certificate
ISO 9001: 2008
Address
Dirk Martensstraat 3a
8200 Brugge
Contact
Wim Degrande
Sales Department
T: +32 50 45 44 06
Turnover
€ 3.000.000
Workforce
20
Machining
Sheet Metal Work
Assembly
3D printing
97
Reddy Sawww.reddy.be
Products
Reddy is specialized in injection of small plastic articles
(maximum 100 grams). Our new factory built in 2009 is ideally
located in central Belgium, 46km south of Brussels. We have
50 years’ experience in plastic injection.
Key Markets
Any industry using small molded plastic parts in large quantities
Certificate
SGS-CEBEC
Address
parc industriel de Tyberchamps -
zone A
7180 Seneffe
Contact
Christian Rouanet
Administrateur-délégué
T: +32 64 22 48 22
Turnover
€ 2.000.000
Workforce
8
Processing Thermoplastics
98
Rein4forcedwww.rein4ced.com
References
Michel Van de Wiele, Atlas Copco, Vitra AG, KU Leuven,
CGK Group, Achilles Design
Certificate
Certified service provider within the SME portfolio
(www.kmo-portefeuille.be)
Address
Interleuvenlaan 62
3001 Leuven
Contact
Michaël Calles
CEO & Co-founder
T: +32 16 39 47 68
Workforce
2
Composites
99
Saeywww.saeysteel.com
Products
Steel Service Center: profiles, tubes, steel laser sheets (SAEY 235
LASERFORM), Steel with a high yield point (S355MC, S420MC,
S500MC, S700MC).
Tube Laser Center:
2D/3D tube laser cutting, diam 610 mm, 400 x 400, 500 x 300,
length 14 m
Key Markets
Complex steel constructions in infrastructure and sports
accomodations.
Machine construction
Construction of agricultural machinery
Metal subcontracting
Offshore
References
Stade de Nice, Stade de Bordeaux, …
Certificate
ISO 9001
EN 1090
Address
Industrielaan 4
8501 Heule (Kortrijk)
Contact
Andy Kindt
Sales & Marketing
T: +32 56 36 14 09
Turnover
€ 62.000.000
Workforce
80
Sheet Metal Work
100
Saint Roch couvin Sawww.saintrochcouvin.com
Products
Saint Roch Couvin has specialized since 1908 in the production of cast
iron boilers with condensation for central heating (15 to 500 KW).
The mastery of cast iron techniques allows us to offer our services
for realizing cast iron pieces with or without core.
Key Markets
Central heating boilers manufacturing.
Certificate
ASME for China and the USA
Address
rue de la Gare 36
5660 Couvin
Contact
Lahbib Ajro
Directeur de Production
T: +32 60 37 01 35
Turnover
€ 13.642.000
Workforce
103
Foundry
Forging
101
Savimétal a.g.www.savimetal.be
Products
Foundry for steels, high alloyed steels and alloyed iron.
Products: hammers, stampers, grabs for crushing, pump volute
chambers, subframe parts for coaches, machine components,
wearing parts for public works, refractory parts for industrial
ovens. We have about 25 000 pieces in 250 alloys.
Key Markets
Automotive, quarries, chemical industry, mechanical
engineering, recycling, cement, mines, steel industry, public
works, waste incineration, power stations, glass industry, water
evaporation, fishing industry, industrial ovens.
Certificate
Own internal quality system approved and appreciated by
our customers.
Address
Prümer Strasse 44
4780 Saint-Vith
Contact
Mme Klaes
Secretary
T: +32 80 28 01 60
Turnover
€ 15.500.000
Workforce
80
Foundry
102
Shapes metalworkswww.shapesmetalworks.be
Products
Shapes Metalworks performs sheet metal work and welding
constructions in different materials (steel, aluminium, stainless
steel). For that purpose we also provide recommendations and
(co)-engineering. Shapes Metalworks disposes of a state-of- the
art machinery (1 punch-machine, 5 laser cutting machines (max.
12m plates), 6 beding machines (0,5 - 8 m), 5 welding robots, wet
painting cabine, ...) and certified TIG / MIG / MAG-welders.
Key Markets
Agriculture / Entertainment / Lighting / Automotive /
Construction / Electronics / Medical / Stoves / Food / Machine
building / Railway
References
Dewulf / LVD / Bekaert / Vyncke / Matthys / NMBS / SCE
Certificate
ISO 3834-2 / EN15085
In preparation: EN1090 / ISO 9001
Address
Nijverheidslaan 53
8560 Gullegem (Wevelgem)
Contact
Dirk Haerinck
CEO
T: +32 56 42 49 70
dirk.haerinck@
shapesmetalworks.be
Turnover
€ 11.650.000
Workforce
85
Sheet Metal Work
Assembly
103
Sinvaconwww.sinvacon.be
Products
We offer solutions for improving the adhesion on surfaces by
means of plasma treatment. With a plasma treatment, we can
clean, activate, etch or even coat the surface with a protective
coating by plasma polymerization.
We co-develop a suitable treatment, we can rent and/or sell
equipment or job-treat your material.
We offer a wide variety of Low Pressure Plasma systems
(from 0.001 m³ up to 12 m³) and Atmospheric plasma systems
We also supply sputter hardware from SCI/Robeko GmbH
Key Markets
Automotive, medical, electronics, plastics, textiles, solar,…
References
3M, Siemens, Bosch, ASML, TRUMF, VDL Group, various
Universities in the Netherlands
Address
Provinciebaan 102
9890 Gavere
Contact
Pascal Verheyen
General Manager
T: +32 478 54 69 68
Surface Treatment
104
Skiallwww.skiall.be
Products
SKIALL is a sheet metal subcontracting company to any industry.
Production is based on laser cutting, punching, bending, welding
and assembly departments all tailored to customers specific needs.
Key Markets
Construction - architecture – Machinery – Medical equipment
Address
Bedrijvenpark De Veert 8a
2830 Willebroek
Contact
Chris Van Steenwinkel
CEO
T: +32 3 860 69 90
Turnover
€ 1.575.000
Workforce
10
Sheet Metal Work
105
Smart metal workswww.smartmetalworks.be
Products
SMART Metal Works is a sheet metal company in Belgium and
Romania. From flat sheet to finished product, this in serial or one
piece production. The expended machinery makes SMART Metal
Works a one-stop-shop with short throughput times at highly
competitive prices.
Smart Metal Works flexibility and responsiveness thanks to
- Automated machinery
- Advanced CAD / CAM software
- All standard raw materials in stock
- Integrated logistics systems
- Hybrid cooperation between Belgium and Romania
Products
Equipment industry, compressor and generator, fireplaces,
electrical and electronic equipment, etc.
Certificate
ISO 9001:2000
ISO 14001
“Need sheet metal? Think SMART “
Address
Jacques Paryslaan 8
9940 Evergem
Contact
Bart De Rycke
Business Development
T: +32 9 254 49 38
Turnover
€ 13.000.000
Workforce
110
Sheet Metal Work
Surface Treatment
Assembly
106
Sogex-eremwww.erem.be
ProductsErem started in 1962 with the manufacturing of components for start
and stop ACEC engines. We rapidly extended our activities to support
our customer needs by manufacturing a wide range of high quality
electromechanical products. With the time, we have in parallel
developed a high know-how in industrial resistive elements.
Today, we continue to support all those product lines and also have
integrated the manufacturing of: special cables highly insulated,
composites materials components, power resistances, electrical
coils, manipulators
Our investment in high technology manufacturing tools has
enable us to specialize in precision machining on speciality parts
using a wide range of materials such as steel, stainless steel, non
ferrous materials (copper, aluminium, brass, ...), technical plastics,
composite materials,...
Quality controls are performed using a 3D control machine.
Our goal is to provide high quality products with excellent service
levels and to be flexible to meet our customer needs.
Key MarketsPrecision machining / Electromechanical conception and
manufacturing / Railway equipment / Composite machining
ReferencesSTIB / SNCB / IBA / Thales Alenia Space / Arcelor
Certificate
Although we are not ISO9001, we have developed our internal
quality system that has allowed us to be certified supplier for
various companies, including in aerospacial industry.
Address
Rue des Forgerons 29
6001 Marcinelle
Contact
Xavier Helbois
General Manager
T: +32 71 36 62 54
Turnover
€ 1.000.000
Workforce
14
Machining
Sheet Metal Work
Assembly
107
Stewalwww.stewal.com
Products
Your engineering partner and toolshop for precision
mechanics. With more than 45 years of experience in precision
mechanical engineering and manufacturing, Stewal is a quality
subcontractor for prototypes and small to medium sized series
of complex tools and parts, plastic injection moulds, cams,
medical instruments and implants… The Stewal team combines
3D CAD-CAM, reverse engineering and other specialised software
and know how with a high end toolshop providing CNC turning,
CNC milling (3,4 and 5 axes), turning-milling, wire and sink EDM,
cylindrical- plane and profi grinding, honing and polishing, deep
hole drilling, laser welding, plastic injection….
A climatized lab with versatile measuring equipment, including
3 CMM’s, supports the company philosophy of quality, precision
and process control.
Key Markets
automotive, aero-space, nuclear energy, electronics, medicine,
mechanical engineering, textile, packaging industry, robotics...
References
Picanol, LVD, Bekaert, Thales, Electrabel, Baxter, Pfizer, GEA
group, UCB, Audi …
Address
Klein Frankrijkstraat 19
9600 Ronse
Contact
Sofie Steenhoudt
Managing Director
T: +32 55 21 52 95
Turnover
€ 3.500.000
Workforce
30
Machining
108
Stubbe bvbawww.stubbemetaalbewerking.be
Products
CNC Turning (ø 600)
CNC Milling (3000x800x800)
Assembly of products and machinery
With more than 20 years of experience in turning and milling,
Stubbe bvba offers his clients high quality products in steel,
stainless steel, aluminum and plastics. We constantly invest in
automatization and education, so we can give the best possible
service to our customers.
Next to turning and milling Stubbe bvba is also your ideal
partner for sawing, welding, drilling and tapping and several
after-treatments.
Key Markets
All industries
References
Machine Industry, Janssens Pharma, Umicore, Barco, Picanol,
Philips, food industry, all type of industries
Address
Rouwbergskens 14
2340 Beerse
Contact
Stubbe Pierre
CEO
T: +32 14 88 34 75
Turnover
€ 3.000.000
Workforce
20
Machining
Assembly
109
Temeka Pgmbhwww.temeka.be
Products
Temeka is a subcontractor in metalworking and welding. We are
specialized in cutting, punching, pressing (125 T), edging (4M) and
profiling steel and aluminum sheet.
Cutting, bending and screwing tubes and flat steel, aluminum etc.
Spot welding - semi automatic welding - TIG - MIG - plumbing.
Surface treatment with subcontractors.
We dispose of our own tool and matrix workshop.
Key Markets
All industrial sectors: construction - glas building - horticulture -
textile - railway – heating and cooling technology
Certificate
EN1090
Address
Engelsdorfer Strasse 8
4780 Recht
Contact
Thomas Keller
Sales Manager
T: +32 80 57 04 56
Turnover
€ 900.000
Workforce
10
Sheet Metal Work
Surface Treatment
Heat Treatment
Assembly
110
Tools & Dies engineeringwww.toolsanddies.be
Products
For the metal stamping and forming industrie: turnkey solutions,
from prototype to full integrated production processes, based on
core business of tool design and fabrication, both progressive as
step by step.
For the plastic industrie: Plastic injection and thermo forming
dies, including cutting devices and turn key solutions for non
standard applications of these processes.
High end semi or finished CNC machineable components.
We have our own metal parts production facility to support
customers in need of assembly components.
Key Markets
All industries that have forming and cutting included in their
proces, this can be metal, plastic but also non typical materials,
examples are cigarette paper, glue etc.
References
Rockfon, Dester, Interalu, Reynaers Alu, Atlas Copco, Llacroix,
Stumabo etc.
Address
Eikenlei 157
2960 Brecht (Sint-Job in ‘t Goor)
Contact
Guy Vleugels
New Business
T: +32 3 633 99 70
Turnover
€ 3.300.000
Workforce
25
Machining
Assembly
111
Ventecwww.ventec.be
ProductsSince the Ventec steel hardening plant was established in 1988, it
has offered a wide range of industrial heat treatments for steel and
non-ferrous products – from piece work to major production runs.
Continuously investment in modern furnaces and ensuring
staff have the expertise to guarantee renewal and continuity:
this represents a key component of the company’s policy, as is
the drive to gain customers full approval of all aspects of the
treatments and services offered.
Our customers value our high level of technical expertise, swift
delivery, personal approach and flexible service, which ranges
from offering advice on steelworking and design issues to a
weekend service, our own laboratory and transport service.
Available processes: vacuum hardening, oil hardening, nitriding
and nitrocarburising, niblox, case hardening and carbonitriding,
induction hardening, vacuum annealing, chemical blackening.
Key MarketsMould and die construction, tooling, mechanical engineering,
automotive industry, off-shore sector, electrical engineering,
mechanical transmission, aluminium extrusion.
ReferencesBekaert / Van De Wiele / Picanol / Indumess / CNH / Gearcraft
Vanhoutte / Halliburton / Sadef / LVD Company / TVH / NIKO /
Ropa / Jaegerson / Buyse Decolletage / Boucherie / Mecamar /
Dana – Spicer Off-Highway / Caterpillar
Address
Noordstraat 8
8560 Moorsele
Contact
Dries Verschaete
Sales Engineer
T: +32 56 41 05 97
Turnover
€ 3.000.000
Workforce
20
Surface Treatment
Heat Treatment
112
Vergo galvawww.vergogalva.be
Products
Vergo Galva is our hot dip galvanization plant, situated in
between Gent and Kortrijk. We form a coating of zinc and zinc
iron alloys on steel products by dipping the chemically prepared
steel in a zinc bath.
We can galvanize very little structures, but also very big 2D- and
3D-structures fit in our galvanization bath.
Vergo Galva is one of the few hot dip galvanization plants in
Europe that can boast such a high level of know-how as regards
zinc plating of cable carrying systems.
Key Markets
steel structures, stairs, railings, fences, containers, machine
building, street furniture, covers, lightning poles, façade
covering, custom fit products,...
Certificate
PED
Address
Industriezone 16
9770 Kruishoutem
Contact
Bert Van de Wiele
Sales Manager
T: +32 9 388 65 11
Workforce
30
Surface Treatment
113
Visserie guerry Sa/nVwww.visserieguerry.be
Products
Since 1924, we manufacture screws, bolts, rivets….
Due to the cold heading and threading process, we guarantee
you an economic and quality production. Our company uses a
variety of different materials including: steel, stainless steel,
aluminium,and brass copper.
Dimension form 2 to 10 mm in diameter and to 90 mm in length.
Protection: Rohs zinc plated, Geomet delta protects, passivation
and phophatation. We can produce screws followings Din,
Iso, NFE, UNC, UNF, along with other specifi and can guarantee a
high quality level by camera sorting system if needed.
We produce a lot of Sems Screws with One or Two washers
(din 6900).
Key Markets
If you need a special screw or a standard screw but with a special
dimension to make your assembly easier, a screw with 1 or
2 washers included (sems screw).
References
Schneider - Teconex - Valeo - Fabory - Bossard - F. Reyher
Certificate
ISO 9001:2008
Address
Heideveld 56
1654 Huizingen
Contact
Philippe Berton
Plant Manager - Administrateur
délégué
T: +32 2 361 28 00
Turnover
€ 2.000.000
Workforce
23
Forging
114
Voith industrial Services nVwww.voith.com
Products
*On Site Machining (Turning till 8m, Milling till 16m, Line boring,
Drilling, Tapping, Pipe Cutting, Welding and Finish Turning of
Shafts with mobile machines or in workshop)
*Leak Sealing (Design, Calculation, Manufacturing)
*Laser Alignment, Bolt –Handling, steelworks
*Spark Erosion, Freezing, Hot-Taping and Clock Spring
Key Markets
*Oil Refineries, Petrochemical Plants, Power Stations (nuclear/
conventional), Ship Industry, etc
Intervention teams in Belgium and abroad
References
BASF, Total, Exxon Mobil, JDN NV, Ineos, etc…
Certificate
ISO 9001, SCCp (Sicherheits Certifikat Contraktoren petro)
Address
Starrenhoflaan 13
2950 Kapellen
Contact
Dirk Boeykens
Managing Director
T: +32 495 29 23 04
Turnover
€ 6.000.000
Workforce
45
Machining
Sheet Metal Work
115
Vulkoprin nvwww.vulkoprin.be
Products
Over the years Vulkoprin® developed the knowledge and
experience to help solve any wheel or castor related enquiries.
Our expert solutions are now source responsibility and quality
assurance as our n°1 priority!
These features coupled with our ISO 9001 certification ensure
that we maintain our leading position as designer and
manufacturer of innovative technical wheel solutions.
Whether you require a standard catalogue stock item or
a custom-made wheel and axle assembly you can be sure
Vulkoprin® will meet your specific requirements.
Key Markets
Industrial wheels for trolleys und lifttrucks, technical drive
wheels, roller coaster wheels, technical form parts, …
References
Colruyt, BT Toyota, CNH, AGC Glass Europe, Van Hool,
Volvo Car Belgium
Certificate
ISO 9001:2008 - ISO 14001 – REACH - RoHS
Address
Herderstraat 4
8700 Tielt
Contact
Philippe Vindevogel
Sales manager
T: +32 51 403 806
info@vulkoprin
Turnover
€ 15.500.000
Workforce
85
116
Address
Talstrasse 16-18, B.P.61
4780 Saint-Vith
Contact
Michael Warny
Managing Director
T: +32 80 22 14 80
Workforce
20
Sheet Metal Work
Assembly
Warny & cie SPRlwww.warny.com
Products
WARNY has been founded in 1961 in St.Vith / BELGIUM.
Since 1967 we produce more than 4000 different body spare
parts for most of the common car types.
Furthermore, we offer our service for the following works
- all kind of metal forming - steel and high-grade steel
- development, design and manufacture of tools
- development and manufacture of welding and controlling
gauges - manufacture of punch-pressing, deep-drawing and
stamping tools - subcontractor for “metal processing” companies
- welding work by robot - ROMAT A310 (CLOOS) and spot-
welding - 3 D Laser cutting (5 axis) - Prototyping - Production of
components. Assemblies.
Since many years, we are working as sub-contractor for well-
known companies of the automotive sector.
From design to production: WARNY, a team to realize your plans.
Key Markets
Companies of the automotive, agricultural and building sector.
Certificate
ISO 9001
117
Wegrawww.wegra.com
Products
Wegra NV is a supplier of high quality fine sheet metal and
mechanical engineering.
Wegra NV acts as an active team player, a partner from project
inception (engineering and prototyping) until completely
finished end product.
As such Wegra NV is the selected partner of Infrabaker Int. for the
production and assembly of the Infrabaker oven, a unique concept
based on infrared technology (see www.infrabaker.com).
Besides their work for third parties Wegra NV has also developed
a stock system. This stackable system is completely customizable
and is the ideal solution for storing long lengths.
Key words: machine construction, fine sheet-metal working,
mechanical working, infrared applications and special equipment.
Key Markets
Main sectors in which Wegra NV operates are: food, health,
traffic being, precision mechanics, warehouse equipment.
References
Infrabaker International, Weiss Technik Belgium
Address
Lieven Gevaertlaan 8
3900 Overpelt
Contact
Michel Vossen
Productieleider
T: +32 11 80 8880
Workforce
20
Machining
Sheet Metal Work
Assembly
118
Zingametall bvbahttp://zingametall-zinga.be
Products
Zingametall develops, produces and commercializes a unique
zinc-rich metal coating (96% pure zinc in dry layer),1-pack, called
ZINGA®, to protect old, new and galvanized or metallized steel
structures from rusting. It offers a full galvanic protection with an
anti-corrosion protecting capacity comparable to HDG, as well as
a passive barrier protection.
It is applicable on site or in workshop by brush, roller or spray,
and thanks to its very short drying time (10min. at 20 °C) it is time
and cost saving. The shelf life of ZINGA® is unlimited.
References
Shell storage tanks Morocco
TOTAL petrochemical Feluy pipings BELGIUM
KILLYBEGS fishing pier Bangor Harbour Piles IRELAND
Düsseldorf Airport GERMANY
Izmit Bay suspension bridge TURKEY
Gugler Waterturbines AUSTRIA
Smulders Eneco Wind Turbines BELGIUM
Certificate
ISO 12944
ISO 9001
Address
Rozenstraat 4
9810 Eke
Contact
Bruno Saverys
CEO
T: +32 471 321 027
Turnover
€ 4.000.000
Workforce
20
Surface Treatment
119
Zweko Opticswww.zweko-optics.com
Products
Zweko Optics activities are centered on four business areas.
Each business area offers solutions.
Visors: quality for vision
Coating: protecting your plastics
Custom: No limits in plastics
Design: producing your ideas
Address
Goolderheideweg 11
3950 Bocholt
Contact
Paul Lipkens
General Manager
T: +32 89 46 93 30
Surface Treatment
Processing Thermoplastics
120120
Company
Foun
dry
Forg
ing
Mac
hini
ng
Shee
t Met
al W
ork
Surf
ace
Trea
tmen
t
Heat
Tre
atm
ent
Asse
mbl
y
Proc
essin
g The
rmop
lasti
cs
Proc
essin
g The
rmos
ets
Stee
l ser
vice
cent
er
Sprin
gs
Com
posi
tes
3D p
rintin
g
3D Infinity ✓
3M ✓
ACD nv
ACM SA (Atelier de construction métallique) ✓ ✓ ✓ ✓ ✓
ADDIPARTS sprl ✓ ✓ ✓
Advanced Coating ✓
Allard-Europe ✓ ✓
Aluro CNC nv ✓
ArcelorMittal Ringmill ✓ ✓ ✓ ✓
Asco Industries ✓ ✓ ✓
Ateliers De Ceuster SA/NV ✓ ✓ ✓
Beerse Metaalwerken ✓ ✓
Belgium Coatings ✓
Bestbend ✓ ✓ ✓
BO-Solutions ✓
Buyse Decolletage ✓ ✓ ✓ ✓
By-Cast NV ✓ ✓
Capaul ✓
Cerfontaine Pierre (Ateliers), SPRL ✓ ✓
C-Mec Kortrijk NV ✓ ✓ ✓ ✓
CMI Maintenance Hainaut ✓ ✓ ✓ ✓
Coatinc Ninove nv ✓
Coil ✓
Combori NV
Consolidated Precision Products Belgium ✓
Culobel nv ✓ ✓
Dejond ✓ ✓ ✓
Delhez ✓
Diametal ✓
121120
Company
Foun
dry
Forg
ing
Mac
hini
ng
Shee
t Met
al W
ork
Surf
ace
Trea
tmen
t
Heat
Tre
atm
ent
Asse
mbl
y
Proc
essin
g The
rmop
lasti
cs
Proc
essin
g The
rmos
ets
Stee
l ser
vice
cent
er
Sprin
gs
Com
posi
tes
3D p
rintin
g
Dovre ✓
Dumoulin Aero ✓ ✓ ✓
Duroc N.V. ✓
EMG Tilco ✓ ✓
Exel Composites ✓
Facim NV ✓ ✓ ✓
Fomeco ✓ ✓ ✓
Fonderie Fallais SA ✓
Fonderies J. Marichal Ketin & Cie ✓
François (Etabl.) ✓ ✓
Full Metal Services ✓ ✓
G.A.M. NV ✓ ✓
Galva Power Group ✓ ✓
Galvaco, SA ✓
Garnimetal SA ✓ ✓
Gieterijen en Werkhuizen Alidor Claeys NV ✓
Gilbos NV ✓ ✓ ✓
Gondrexon NV ✓
Graux ✓ ✓ ✓ ✓
Hainaut-Carlier (Société Nouvelle) ✓ ✓ ✓ ✓
Heinen SA ✓
Hermans Verenfabriek ✓ ✓
Isomatex ✓
JAEGERSON nv ✓ ✓ ✓
JONCKHEERE PMC Poperinge Metal Construction ✓ ✓ ✓
JONCKHEERE subcontracting ✓ ✓ ✓
Kanigen Works Benelux ✓
Kautex Textron Benelux ✓
Komec Helsen NV ✓ ✓ ✓
122
Company
Foun
dry
Forg
ing
Mac
hini
ng
Shee
t Met
al W
ork
Surf
ace
Trea
tmen
t
Heat
Tre
atm
ent
Asse
mbl
y
Proc
essin
g The
rmop
lasti
cs
Proc
essin
g The
rmos
ets
Stee
l ser
vice
cent
er
Sprin
gs
Com
posi
tes
3D p
rintin
g
Lamifil nv
Les Aciéries de la Meuse SA ✓
Lithcote Europe SA ✓
Longrée (Nouvelles Forges) ✓
MA Precision Mechanics ✓ ✓
Magolux SA ✓
Magotteaux Liège SA ✓
Malcourant Mécanique ✓
Marcel Verfaillie-Leroy BVBA ✓
MECASOFT SA ✓
Mecaspring ✓ ✓
Mekanische Konstruktie Baudoin ✓ ✓
Metagra Industry ✓ ✓ ✓
Metakor NV ✓ ✓ ✓
Métaux Emboutis SA ✓ ✓
Mockel AG ✓ ✓ ✓ ✓
Multi Services Découpe ✓
Oerlikon Balzers Coating Benelux NV ✓
Olsen Engineering ✓
Omco International ✓ ✓
Omco Metals ✓
OSG-DAVID grinding services ✓
Packo Inox Surface Treatment ✓
Paumelles Liègeoises ✓ ✓ ✓ ✓
Pedeo NV ✓
Pegard Productics ✓ ✓
Polyworks Concepts ✓
Pour Demain ASBL ETA 125 - Le Val du Geer ✓ ✓
Prakto - Theo Laureys nv ✓ ✓ ✓
123
Company
Foun
dry
Forg
ing
Mac
hini
ng
Shee
t Met
al W
ork
Surf
ace
Trea
tmen
t
Heat
Tre
atm
ent
Asse
mbl
y
Proc
essin
g The
rmop
lasti
cs
Proc
essin
g The
rmos
ets
Stee
l ser
vice
cent
er
Sprin
gs
Com
posi
tes
3D p
rintin
g
PRECIMETAL CASTINGS ✓ ✓ ✓ ✓
Precision Metals EU ✓
Provan ✓ ✓
Punch Metals ✓ ✓
Raytech bvba ✓ ✓ ✓ ✓
Reddy SA ✓
Rein4forced ✓
Saey ✓
Saint Roch Couvin SA ✓ ✓
Savimétal A.G. ✓
Shapes Metalworks ✓ ✓
Sinvacon ✓
Skiall ✓
Smart metal works ✓ ✓ ✓
Sogex-Erem ✓ ✓ ✓
Stewal ✓
Stubbe Pierre ✓
Temeka PGmbH ✓ ✓ ✓ ✓
Tools & Dies ✓ ✓
Ventec ✓ ✓
Vergo Galva ✓
Visserie Guerry SA/NV ✓
Voith Industrial Services NV ✓ ✓
Vulkoprin nv
Warny & Cie SPRL ✓ ✓
Wegra ✓ ✓ ✓
Zingametall bvba ✓
Zweko Optics ✓ ✓
We provide complete turnkey solutions for the manufacturing industry(s). This based on our core – strength of tool, mold and die design and fabrication. This results in solutions for plastic forming and cutting , based on injection mold and vacuum form technology, and metal ,both ferrous, non-ferrous as nonstandard materials forming and cutting. Tools and Dies Engineering can handle a complete project starting from a basic market generated idea, from proto type generation up to high volume fabrication processes. We also provide the opportunity to deliver sub contracted components, produced in our sister company : Tools & Die Production, which owns several mechanical automated presses up to 250mT. Our CAD CAM system is fully digital linked with our CNC based manufacturing plant, and assures that no human interference will occur between the desired product form and function and the obtained process.After installation and start up, a complete array of support and maintenance is offered, even as intense as technician perma-nency at customer production site. Our + 500 years of combined experience will definitively create the best option for your demanding production requirements.
Eikenlei 1572960 BrechtT: +32 (03) 633.99.70
[email protected]@toolsdieseng.bewww.toolsanddies.be
VENTEC NV Noordstraat 8
B-8560 [email protected] www.ventec.be
Tel. +32 (0)56 41 05 97Fax +32 (0)56 40 41 66
• VACUUMHARDEN
• OLIEHARDEN - VEREDELEN
• CEMENTEREN - CARBONITREREN
• NITREREN - NIBLOX
• INDUCTIEHARDEN
• GLOEIEN
• CHEMISCH ZWARTEN
• LABO
• MAGNETISCH SCHEURONDERZOEk
• STAALADVIES
• EIGEN TRANSPORTDIENST
STAALHARDERIJ NV
Elma Multimedia B.V.B.A.Generaal de Wittelaan 17A | B-2800 Mechelen
Tel. +32 (0)15 55 88 88 www.elma.be | [email protected]
www.stewal.com
Unieke badafmetingen
Met een lengte van 13 m, een breedte van 1,6 m en
een diepte van 3,5 m beschikt
VERZINKERIJ LENSSEN
over één van de diepste verzinkingsbaden
in België en Europa.
H. FORDLAAN 5 I 3600 Genk I Tel. 089/61 34 20 - 61 34 21 I Fax 089/61 34 22
ADVERTENTIESKS
When mass production canmeet individual demands.
Even Karla’s.
That’s Ingenuity for life.
www.siemens.be/industrie
Until now, production processes were either fast orflexible. Intelligent machines have changed that. For acosmetics company this means being able to producean entire range of shampoos using a single assemblyline. It means being able to bring their products ontoshelves in half the time. It also means being able toreact efficiently to even the most individual customerdemands.This matters because it is a competitiveedge for the manufacturer. And it ultimately makesreal what matters by opening up many new possibili-ties for everyone. And that’s Ingenuity for life.
Ad Sie ELMA 10-2016_Opmaak 1 27/10/16 13:55 Pagina 1
2160001868_ADV_6845.indd 1 07-11-16 15:59
Business Guide
Busi
ness
Gui
de -
Belg
ian
Mec
hani
cal S
uppl
iers
Belgian Mechanical Suppliers