c-07 private brand & trend division - company | vendors ... · vendor partnership manual...
TRANSCRIPT
Vendor Partnership Manual
Section 7 – Private Brand & Trend
Vendor Partnership Manual PRIVATE BRAND & TREND
Please review this entire chapter. Significant changes have occurred since January 2015
.
Vendor Partnership Manual PRIVATE BRAND & TREND
TABLE OF CONTENTS
1. Softlines Private Brand & Trend Procedures ....................................................................... 1
1.1 Overview ........................................................................................................................................................ 1
1.2 Evaluation Request/Testing & Submittal Evaluation Forms .................................................................... 1
1.3 Overview of Private Brand & Trend/Vendor Compliance Processes ...................................................... 1
1.3.1 Product Specification Development ........................................................................................................... 1
1.3.2 Vendor Selection ........................................................................................................................................ 1
1.3.3 Color Standard Distribution ........................................................................................................................ 2
1.3.4 Fit/Make Approval ...................................................................................................................................... 2
1.3.5 Lab Dip/Strike Off Approval ........................................................................................................................ 2
1.3.6 Pre-Production/Initial Fabric and Component Quality Approval ................................................................. 3
1.3.7 Production Piecegood Component - Color Evaluation ............................................................................... 3
1.3.8 Production Piecegood & Component – Mandatory Laboratory Testing ..................................................... 3
1.3.9 Production Garment – Mandatory Laboratory Testing ............................................................................... 3
1.3.10 Top of Production Garment Approval (Upon request only) ........................................................................ 4
1.3.11 Production Size Run Approval (Upon request only) ................................................................................... 4
1.3.12 Production Garment Approval (Upon request only) ................................................................................. 4
1.4 Fit/Make Approval Samples ......................................................................................................................... 4
1.5 Lab Dip/Strike off Samples .......................................................................................................................... 5
2. Hardlines/Home Textile/OTC/Consumables - Private Brand & Trend Procedures ........... 6
2.1 Overview ........................................................................................................................................................ 6
2.2 Evaluation Request Submittal Evaluation Forms ...................................................................................... 6
2.3 Overview of Private Brand & Trend/Vendor Compliance Processes for Hard/Home ........................ 6
2.3.1 Product Specification Development ........................................................................................................... 6
2.3.2 Vendor Selection ........................................................................................................................................ 6
2.3.3 Color Standard Distribution ........................................................................................................................ 6
2.3.4 Lab Dip/Strike Off Approval ........................................................................................................................ 7
2.3.5 Pre-Production Quality Sample Approval .................................................................................................. 7
2.3.6 Top of Production Reference Sample ....................................................................................................... 7
2.3.7 Private Brand Packaging Hard/Home ....................................................................................................... 7
2.3.8 Plan-O-Gram & Advertising Samples ........................................................................................................ 8
2.3.9 Production Sample Approval (Upon request only) .................................................................................... 9
2.4 Approval Samples ....................................................................................................................................... 9
Vendor Partnership Manual PRIVATE BRAND & TREND
2.5 Lab Dip/Strike off Samples ......................................................................................................................... 9
3. Private Brand & Trend Division Contact List ..................................................................... 10 4. Exhibits .................................................................................................................................. 11
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-1
1. Softlines Private Brand & Trend Procedures
1.1 Overview Shopko’s corporate mission states: “We are committed to offering quality merchandise and service to meet our customers’ lifestyle requirements for casual apparel, home, family, and health needs with style - at prices that communicate real value ...”
In keeping with our corporate mission, Shopko’s Private Brand & Trend Division/Vendor Compliance Department is completely committed to maintaining the highest standards of quality and value in all products we offer our customer. As such, vendors cannot ship product until a Product Approval Letter (PAL) is issued by Shopko’s Vendor Compliance team. Failure to do so will result in a 20% penalty chargeback (based on the value of the PO).
Vendors who wish to build a prosperous, long term partnership with Shopko must adhere to all requirements and procedures as set forth in this manual.
NOTE: Shopko’s QA/Floor Ready requirements are set forth by the Private Brand & Trend Division.
1.2 Evaluation Request/Testing & Submittal Evaluation Forms
A Submittal and Evaluation Request Form must be filled out correctly and completely for any sample submitted to Shopko’s Private Brand & Trend Division for Evaluation.
See the Evaluation Request Forms in the Exhibit section of this chapter.
A Softlines Laboratory Testing Request Form must be filled out correctly and completely for any sample submitted to a Shopko approved testing laboratory. See Softlines Laboratory Testing Request Form in the Exhibit section of this chapter.
1.3 Overview of Private Brand & Trend/Vendor Compliance Processes
1.3.1 Product Specification Development
• Shopko Buyer and/or Product Manager submit development samples to the Technical Design Department for review and development of product specifications.
o If style is Shopko Driven, meaning style originates from Shopko, the product specification will include: technical sketch, fabric and component details, construction make details and a graded size specification.
o If the style is Vendor Driven, meaning the style originates from the vendor, the product specification will only include a graded size specification and a fit/make evaluation page.
• Based upon Shopko body charts; minimum inches over body and desired fit, Technical Design includes in the product specification a graded size specification. Based upon the sample, requested changes, and Shopko’s requirements, Technical Design includes fabric/component details and detailed construction make specifications.
• The Technical Design Department returns the development sample and/or fabric and trim quality when available and/or applicable, along with completed Product Specifications, to the Sourcing Department for distribution to potential Vendors and Agents.
1.3.2 Vendor Selection
• The three top strategic initiatives of Shopko’s apparel division are as follows:
1. First quality product
2. On-time delivery
3. Fair pricing
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-2
• All three factors have equal weight in determining Shopko’s vendor matrix. Only those vendors who perform in these areas will be considered by Shopko for private label production. Vendors are rated on a seasonal basis and updated ratings are supplied to the merchants prior to a season’s pricing/sourcing stage.
1.3.3 Color Standard Distribution
• Trend Manager will forward a color copy of the Shopko color palette to current vendors at the beginning of each season.
• Additional color requests can be forwarded to [email protected]
• Vendor is required to order color swatches from SCOTDIC and Pantone.
WEB-SITE: www.scotdic.com or www.pantone.com Ph #: 1-800-SCOTDIC Fax #: 212-736-1740
• Orders should be made through US office only to ensure color consistency.
• If vendor/agent is having difficulty matching a standard, SCOTDIC is available for technical assistance.
• Stock Piecegoods Tested
• If applicable, Vendor/Agent submits in-stock piecegoods to Shopko’s designated laboratory for pre-production testing.
• Any standards that start with SKO are Shopko Standards. If you need a swatch of a Shopko Standard, please contact the Color Manager.
1.3.4 Fit/Make Approval
• Vendor/Agent submits a fit/make approval sample (in fabric as close to production piecegoods as possible in weight, construction and fiber content) to Shopko Technical Design for evaluation. The sample is evaluated by Shopko Technical Design for fit, make, and overall quality, including adherence to fit/make specifications and Shopko standards.
• If sample is Approved, Shopko Technical Design will communicate this to the Vendor/Agent through a fit/make sample evaluation and comments. Vendor/Agent may than proceed with next step of the approval process.
• If sample is Conditionally Approved, Shopko Technical Design will communicate this to the Vendor/Agent through a fit/make sample evaluation and comments. Vendor/Agent must make minor adjustments and then proceed with next step of the approval process. At this time, Technical Design may or may not request to see a Pre-Production Sample.
• If sample is Not Approved, Shopko Technical Design will communicate this to the Vendor/Agent through fit/make sample evaluation and comments. Vendor/Agent is required to correct problems and resubmit corrected fit samples for evaluation.
• If more than one factory is producing the garment, each factory must submit fit/make approval samples to Shopko Technical Design.
1.3.5 Lab Dip/Strike Off Approval
• Vendor/Agent submits lab dips to Shopko Color Manager for evaluation prior to dyeing production piecegoods.
• Lab dips must be submitted on the Lab Dip Submittal Form (found in the Exhibit section of this chapter).
• Shopko Color Manager evaluates lab dips against established standards using a spectrophotometer and/or light box visual evaluation.
• If lab dip is approved, Shopko Color Manager will communicate this to the Vendor/Agent through color/strike off evaluation comments. Vendor/Agent may then proceed with next step of the approval process for color. Vendor/Agent may proceed with initial creative printing color approvals.
• Lab dips which are marginal failures according to the spectrophotometer will be visually evaluated to determine whether or not they are acceptable.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-3
• Vendor/Agent submits all strike offs to Shopko Creative Designer for evaluation prior to printing production piecegoods.
• Vendor/Agent submits all strike offs of embellishments to Shopko Creative Designer for evaluation on a garment for approval of placement prior to production piecegoods.
• If strike off is approved, Creative Designer will communicate this to the Vendor/Agent through strike off evaluation comments via e-mail. Vendor/Agent may then proceed with next step of approval process.
• If strike off is not approved, Creative Designer will communicate this to the Vendor/Agent through strike off evaluation comments via e-mail. Vendor/Agent is required to correct problems and resubmit corrected strike off to Creative Designer for evaluation.
1.3.6 Pre-Production/Initial Fabric and Component Quality Approval
• Vendor/Agent submits fabric quality and novelty component samples to Shopko Technical Design for evaluation. Technical Design will advise comments.
1.3.7 Production Piecegood Component - Color Evaluation
• Vendor/Agent submits 5” x 5” square of all production piecegoods and all production components to the Shopko Color Manager for evaluation.
• Shopko Color Manager evaluates the production piecegoods against approved lab dips using a spectrophotometer and evaluates the production components visually using a light box.
• Comments regarding the production piecegoods and components are forwarded to the Vendor/Agent via the Submittal and Evaluation Request Form. Failures must be retreated and resubmitted.
1.3.8 Production Piecegood & Component – Mandatory Laboratory Testing
• At the same time as the Production Bulk Piecegoods & Components are sent to Shopko for color evaluation, Vendor/Agent submits production piecegoods and components (in all colors and prints) directly to Shopko approved laboratory for testing using a Softlines Laboratory Testing Request Form. See a copy of this form in the Exhibit section of this chapter.
• If more than one mill is producing piecegoods, each mill must submit each color and print for laboratory testing.
NOTE: Vendor/Agent may not proceed with any part of cut and sew production (this includes marker making) or care label until fit/make, fabric & component quality, color/design approvals and production piecegoods testing approvals are given. If Vendor/Agent does proceed before receiving approval; they do so at their own risk.
1.3.9 Production Garment – Mandatory Laboratory Testing
• Vendor/Agent submits two* production garments (in any one color way) directly to a Shopko approved laboratory for garment testing using a Softlines Laboratory Testing Request Form.
* Quantity may vary depending on testing being done. Contact Bureau Veritas to discuss the estimated number of samples needed.
NOTE: Garments that are color-blocked or garments with contrast component colors must be tested in garment form in all color ways, to verify colorfastness to cross staining in actual laundering.
• If more than one factory is producing garments, each factory must submit garments for laboratory testing.
• According to the Consumer Product Safety Improvement Act (CPSIA), kids apparel must be tested in garment form for validation of lead in substrates, lead in surface coating, and phthalate (when applicable) limitations.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-4
Additionally, all manufacturers are required to have a reasonable testing program in place as required by the CPSIA legislation.
NOTE: Garments sent for testing must be production quality, made of approved production fabric and components, and made on production machinery. Vendor/Agent must not proceed with actual production or care labels until garment testing approvals are given. If Vendor/Agent does proceed before receiving approval, they do so at their own risk.
1.3.10 Top of Production Garment Approval (Upon request only)
• Vendor/Agent may be required by Technical Design to submit one top of production garment, for verification of fit, make and overall quality. Shopko Technical Designer will communicate results to Vendor/Agent.
1.3.11 Production Size Run Approval (Upon request only)
• Vendor/Agent may be required to submit a complete size run to Shopko Technical Design for verification of fit, make, and overall quality. Shopko Technical Design will communicate results to Vendor/Agent.
1.3.12 Production Garment Approval (Upon request only)
• During the final random inspection, the inspector may be required by the Vendor Compliance department to pull one production garment for testing.
• Production garment is to be submitted directly to the lab.
• Only one color way is required to be tested. Inspector should pick the darkest color.
• Vendor pays testing charges.
• Production garment will be tested for shrinkage and after wash appearance.
• Results will be available 5-7 business days after the production garment is received.
1.4 Fit/Make Approval Samples Approval samples must be submitted in the designated sample size as detailed below:
Size Range Sample Size
Newborns 6 months or 3/6 months
Infants 18 months
Toddler 3T
Girls 4-6X 5 or xs (4-5)
Girls 7-16 10 or large (10-12)
Boys 4-7 6 or xs (4-5)
Boys 8-20 12 or large (10-12)
Ladies 10 or medium (8-10) EZ,
12 or medium (10-12) NC, WB
Bras 34B
Panties 6 or medium
Women’s Plus 18W or 16W/18W
Men’s Tops L (42-44)
Men’s Bottoms 34W x 32L or medium (32-34W)
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-5
• Samples must be correct construction/workmanship and make details.
• Samples must be made from piecegoods of correct weight, construction, and fiber content with similar ground color, print color, print coverage and hand.
For fast turnaround of samples; ensure the following steps are taken:
• Correctly and completely fill out the Evaluation Request Form.
• Check the sample to be sure that it matches the product specification and graded size specification. Note any discrepancies.
• Use Shopko's "Methods of Measurement" for detailing the size specification.
• Construct the sample as it will be in production, using the same equipment and sewing procedures as in production, including all details; example, if vents are to be bartacked in production, then sample must have bartacks.
• Make the sample in fabric that is as close to production piecegoods as possible in weight, construction and fiber content with similar ground color, print color, print coverage and hand.
1.5 Lab Dip/Strike off Samples Samples must be submitted in:
• Appropriate sample size:
• Lab dips for fabric weights 170g/m2 and heavier must be no smaller than 1”X2”.
• Lab dips for fabric weights of less than 170g/m2 must be no smaller than 3”X3”.
• Lab dips for yarn must be no less than one full skein (10 yards) of yarn.
• Strike offs and plaids must be submitted in no less than one full repeat.
• Appliqués and embellishments must be submitted as they will be used on garment.
• Lab dips for each color and fabrication being produced at one mill location and used for a style or grouping must be submitted as only one set of lab dips.
For fast turnaround of samples; ensure that the following steps are taken:
• Correctly and completely fill out the Evaluation Request Form.
• Submit all lab dips intended for a coordinate grouping at the same time.
• Submit all lab dips directly to Shopko Color Manager.
• Submit all strike offs directly to Shopko Color Manager.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-6
2. Hardlines/Home Textile/OTC/Consumables - Private Brand & Trend Procedures
2.1 Overview Shopko’s corporate mission states: “We are committed to offering quality merchandise and service to meet our customers’ lifestyle requirements for casual apparel, home, family, and health needs with style - at prices that communicate real value ...”
In keeping with our corporate mission, Shopko’s Private Brand & Trend Division/Vendor Compliance Department is completely committed to maintaining the highest standards of quality and value in all products we offer our customer. As such, vendors cannot ship product until a Product Approval Letter (PAL) is issued by Shopko’s Vendor Compliance team. Failure to do so will result in a 20% penalty chargeback (based on the value of the PO).
Vendors who wish to build a prosperous, long term partnership with Shopko must adhere to all requirements and procedures as set forth in this manual.
NOTE: Shopko’s QA/Floor Ready requirements are set forth by the Private Brand & Trend Division.
2.2 Evaluation Request Submittal Evaluation Forms The appropriate Home & Hardlines Submittal request form must be filled out correctly and completely for any sample submitted to Shopko’s Private Brand & Trend Division Hard/Home department which includes the following: color dips, design strike offs, bulk fabric & trims, approval sample, pre-production sample, meeting sample, production sample, packaging layouts & proofs.
NOTE: See the submittal request forms in the exhibit of this chapter.
2.3 Overview of Private Brand & Trend/Vendor Compliance Processes for Hard/Home
2.3.1 Product Specification Development
• Sourcing Specialist and/or Technical Designer sends to each vendor a product recap report detailing product specific information
2.3.2 Vendor Selection
• The three top strategic initiatives of Shopko’s Hard/Home division are as follows: 1. First quality product 2. On time delivery 3. Fair pricing
• All three factors have equal weight in determining Shopko’s vendor matrix. Only those vendors who perform in these areas will be considered by Shopko for private label production.
2.3.3 Color Standard Distribution
• Designated Creative Designer per season will forward a color copy of the Shopko color palette to current vendors at the beginning of each season.
• Additional color requests can be forwarded to the designated Creative Designer for that season.
• Vendor is required to order color swatches from Pantone.
• WEB-SITE: www.pantone.com Orders should be made through U.S. office only to ensure color consistency.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-7
2.3.4 Lab Dip/Strike Off Approval
• Vendor/Agent submits lab dips to Shopko Technical Designer for evaluation prior to dyeing production piecegoods.
• Lab dips must be submitted on the lab dip submittal form (found in the exhibit section of this chapter).
• Shopko Technical Designer evaluates lab dips against established standards using a light box visual evaluation.
• If lab dip is approved, Shopko Technical Designer will communicate this to the vendor/agent through color comments via email. Vendor/agent may then proceed with the next step of the approval process.
• If lab dip is not approved, Shopko Technical Designer will also communicate this to the vendor/agent through color comments via email. Vendor/agent is required to correct problems and resubmit corrected lab dip to the Technical Designer for evaluation.
• Vendor/Agent submits all strike offs to Shopko Creative Designer for evaluation prior to printing production piecegoods.
• If strike off is approved, Shopko Creative Designer will communicate this to the vendor/agent through strike off comments via email. Vendor/agent may then proceed with the next step of the approval process.
• If strike off is not approved, Shopko Creative Designer will also communicate this to the vendor/agent through strike off comments via email. Vendor/agent is required to correct problems and resubmit corrected strike off to the Creative Designer for evaluation.
2.3.5 Pre-Production Quality Sample Approval
• Vendor/Agent submits completed quality product sample to Shopko Creative and/or Technical Designer for evaluation. Creative Designer will advise comments on design aspect and Technical Designer will advise comments on quality and construction. Failures must be retreated and resubmitted.
NOTE: Vendor/Agent may not proceed with any part of cut and sew production or care label until fabric & component quality, color/design approvals and production product testing approvals are given. If Vendor/Agent does proceed before receiving approval, they do so at their own risk.
2.3.6 Top of Production Reference Sample
• Vendor/Agent is required by Creative/Technical Designer to submit one Top of Production sample in all sizes for verification of quality, construction, and packaging quality. Additionally, samples will be maintained as production reference samples in-house.
2.3.7 Private Brand Packaging Hard/Home
Shopko has packaging requirements for private brand product. Vendor may use local print source for all packaging components. Seasonally, packaging artwork is updated or possibly changed entirely. In addition to the below information each season a separate Packaging Guideline will be provided by Creative Designer or Technical Designer and will include art/color direction, packaging sizes and materials, finished fold details, packaging details. Should there be any changes to material weights or insert finishes, this too will be included.
• Initial artwork will be provided to Vendor/Agent at the beginning of each season/project. Once received, vendor will develop initial layouts and submit via digital files to Creative Designer or Technical Designer for layout approval.
• Packaging that requires photo image that is provided by Shopko’s photo studio, photo sample must be received at least 10 weeks prior to exit factory date.
• If layout is approved, Shopko Creative Designer or Technical Designer will communicate this to the Vendor/Agent via email. Vendor/Agent may then proceed to the next step; develop actual press proofs.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-8
• If layout is not approved Shopko Creative Designer or Technical Designer will also communicate via email the corrections needed. Vendor/Agent is required to correct problems and resubmit layouts for review.
• Press proofs must be submitted with Packaging Proof Submission Form (found in the Exhibit section of this Chapter).
• If proof(s) are approved, Shopko Creative Designer or Technical Designer will communicate this to the Vendor/Agent via email.
PLEASE NOTE: Approval of press proofs from Product Manager, Technical Designer, or Sourcing Specialist include: Artwork, Font(s), overall layout, PMS color accuracy, UPC and retail verification. Legal copy, care instructions, and fiber content are not reviewed as this is verified with Vendor Compliance only. If Vendor/Agent proceeds with packaging production before Vendor Compliance has verified these details, they do so at their own risk.
• If proof(s) are not approved Shopko Creative Designer or Technical Designer will also communicate via email the corrections needed. Vendor/Agent is required to correct problems and submit new proofs for review when available.
• For Hang tags, please use 300gsm bright white coated card stock unless otherwise specified.
• For stickers, please use 80g bright white sticker stock.
• To minimize printing submissions, please follow this printing procedure:
Ø Use Spot color printing for all Pantone® references
Ø Photos—please use process printing techniques
• Poly gauge for all poly bags must be 0.15mm unless otherwise specified
• Hardware and components will be determined and information provided within specific guideline.
• When PDQ’s are part of the packaging, specified corrugate weight will be included in the Packaging Specific Guideline.
• HARD/HOME FURNITURE CARTON MARKINGS: 1. Carton markings are required on all furniture. Carton markings instructions can be found in the Exhibit section
of this chapter.
• SEASONAL DÉCOR CARTON MARKINGS & PACKAGING INSTRUCTIONS: 1. Each season requires its own carton markings to be printed on both the master and inner carton. Carton
markings and packaging instructions can be found in the Exhibit section of this chapter. NOTE: If a Seasonal inner carton marking is not specified in the Exhibits section of this chapter, standard carton markings must be followed. i.e. Outdoor Living Décor.
IMPORTANT NOTE: The UPC barcode must be done in UPC-A, UPC-E, or EAN-13 Symbology.
2.3.8 Plan-O-Gram & Advertising Samples
Based upon the sample needs, Shopko’s Sourcing Specialist may request samples for Plan-O-Gram purposes, Advertising purposes or both. In order to keep costs down, sample requests will be kept to a minimum.
• Plan-O-Gram samples may be requested in the event a physical product walk off is required. Two samples in each size and each color way would be required. All samples will need to be in final packaging.
• Advertising samples are required for all products and in all colors and/or designs. The following sample sizes would be required for each category with multiple sizes:
1. Sheet Sets- Queen size & Full size when queen is not offered in the assortment 2. Top of Bed- Full/Queen. (this includes comforters, blankets) 3. Towels- bath and hand
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-9
2.3.9 Production Sample Approval (Upon request only)
• During the final random inspection, the inspector may be required by the Vendor Compliance department to pull one production sample for testing.
• Production sample is to be submitted directly to the lab.
• Only one color way is required to be tested. Inspector should pick darkest color.
• Vendor pays testing charges.
• Production sample will be tested for shrinkage and after wash appearance.
• Results will be available 5-7 business days after the production sample is received.
2.4 Approval Samples Approval samples must be submitted in all sizes.
2.5 Lab Dip/Strike off Samples
Samples must be submitted in:
• Appropriate sample size
• Color lab dips must be no smaller than 2” x 2”.
• Color lab dips for yarn must be no less than 5” in length.
• Strike offs must be submitted no less than one full repeat.
• Appliqués and embellishments must be submitted as they will be applied to product.
For fast turnaround of samples; ensure that the following steps are taken:
• Correctly and completely fill out the correct submittal form.
• Submit all lab dips intended for a coordinate grouping at the same time.
• Submit all lab dips directly to Shopko Technical Designer.
• Submit all strike offs directly to Shopko Creative Designer.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-10
3. Private Brand & Trend Division Contact List
VP Phone Number
Vice President Private Brand & Trends Home & Hardlines 920-429-7454
PRODUCT DEVELOPMENT
Private Brand Manager – Outdoor Living, Sporting Goods, Housewares, and Storage 920-429-7402
Private Brand Manager – Seasonal Décor 920-429-7165
Private Brand Manager – Consumables/HBA 920-429-7402
Private Brand Manager – Ladies Tops Intimates, Sleepwear, Active Apparel & Accessories
920-429-4116
Private Brand Manager – Men’s Children’s, NIT, & Basic Apparel 920-429-4697
Creative Designers 920-429-4741
920-429-4415
920-429-4293
920-429-4851
Technical Designer – Men’s & Ladies Sleepwear 920-429-4692
Technical Designer – Ladies Tops & Active 920-429-4791
Technical Designer – Ladies Accessories 920-429-4062
Technical Designer – Girls, Boys, New Born/Infant/Toddler 920-429-4576
Technical Designer – Home: Indoor/Outdoor Furniture & Housewares 920-429-7168
Technical Designer – Home: Seasonal Décor 920-429-7165
Technical Designer – Home 920-429-4023
SOURCING & PRODUCTION
Private Brand Production Coordinator – Home 920-429-4403
Private Brand Production Coordinator – Apparel 920-429-7763
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-11
4. Exhibits Private Brand Manual Request Form
Softlines Laboratory Testing Request Form
Hardlines Evaluation Request Form (HERF)
Health, Beauty, Household, Foods, & Bath Body etc Products Test Form
Bulk Fabric/Creative/Color Submittal Evaluation Form
Initial Lap Dip Color Submit & Evaluation Form
Initial Creative Artwork Submittal/Evaluation Form
Bulk Creative Artwork Submit & Evaluation Form
Fit/Make Submittal Form
Fabric & Trim Quality Submittal/Evaluation Form
Ladies Accessory & Hosiery Sample Submittal Form
Home & Hardlines Prepress Submission Form
Home & Hardlines Lab dip/Trim Submission Form
Home Textile Sample Submission
Hardlines Sample Submission
Home & Hardlines Sample Submission
Carton Marking Requirements for Composite Wood Products
Carton Marking Requirements for Non-Composite Wood Products
Holiday Tabletop Packaging Instructions for Master & Inner Carton
Holiday Giveaway Packaging Instructions for Master & Inner Carton
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-12
Private Brand & Trend Manual Request Form Following is a brief synopsis of Shopko and it’s’ subsidiaries Private Brand & Trend Program. Manuals have been developed which go into detail of what the Vendor/Agent requirements are. It is the Vendor/Agent’s responsibility to obtain the manuals from the Private Brand & Trend Department and comply with all requirements as well as all government/industry standards.
Manuals may be obtained by filling out the information below and faxing it to the appropriate private Brand & Trend Department.
Company: __________________________________________________________________
Address: __________________________________________________________________
__________________________________________________________________
__________________________________________________________________
Attention: __________________________________________________________________
Telephone: __________________________________________________________________
Fax: __________________________________________________________________
Type of Product Manufactured: __________________________________________________
PRIVATE BRAND VENDORS ONLY
Shopko Vendors fax to 920-429-8496
Apparel Quality Manual - Includes: Quality Requirements, Methods of Measurements, Laboratory Testing Standards, Vendor Compliance Procedures, and Private Brand Inspections.
Sleepwear & Intimate Quality Manual - Includes: Quality Requirements, Methods of Measurements, Laboratory Testing Standards, Vendor Compliance Procedures, and Private Brand Inspections.
Accessories Quality Manual – Includes: Methods of Measurements, Laboratory Testing Standards, Vendor Compliance Procedures, and Private Brand Inspections.
Softlines Floor Ready Standards Manual – Located online @ http://www.shopko-vendors.com/vendors-floor-ready-manual. This manual includes: Suppliers, Vendor Non-Compliance Fees, Sizing Standards, Packaged Garment Requirements, Hangtag/Price Ticket Requirements, Hanger and Size Clip Lead-times, Hanging Requirements, Folding Requirements
Hardlines Floor Ready Standards Manual - Includes: General Merchandise Requirements
Vendor Compliance Manual – Includes program overview and forms for Social Compliance program, Garment Inspection program, and Hardline Testing program
OTC, Household Goods Testing Manual – Includes program overview and forms
SHOPKO RETAIL VENDORS
Shopko Floor Ready Standards Manual – Located online @ http://www.shopko-vendors.com/vendors-floor-ready-manual. This manual includes: Suppliers, Vendor Non-Compliance Fees, Sizing Standards, Packaged Garment Requirements, Hangtag/Price Ticket Requirements, Hanger and Size Clip Lead-times, Hanging Requirements, Folding Requirements.
Shopko Hardlines Floor Ready Standards Manual – Includes: General Merchandise Requirements.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-13
Softlines Laboratory Testing Request Form FORM MUST BE FILLED OUT AS ACCURATELY AS POSSIBLE TO AVOID DELAY IN TEST RESULTS
Date mailed to lab by vendor:_________________________________________________________________
I. VENDOR INFORMATION Vendor Name: Agent/U.S. Importer Name: Contact Name: ______________________________________________________________ Manufacturer/Factory Name: _____________________________________________________________________________________________________ Manufacturer Telephone # Manufacturer Fax #: Manufacturer E-mail Address:_______________________________________ Vendor RN#/WPL#/CA#: ________________________________________ Manufacturer Mailing Address: ____________________________________________________________________________________ Bill to factory/vendor name: _______________________________________________________________________________________ Bill to address: ________________________________________________________________________________________________ Bill to contact name: ____________________________________________________________________________________________
II. BUYER CONTACT (for this submission) Shopko Buyer Last Name: ___________________________________ Product Category: _____________________________ Buyer Department #: ____________
III. PRODUCT INFORMATION Shopko product specification and sketches must be attached to sample (when available).
Product/Style Description: Shopko Style # & (Vendor Style #): Colors Tested: Brand Name: _________________________________________________________________________________________________________________ Contracted Weight &/or Count: ______________________________ Care Instructions_______________________________________________________ Fiber Content: ________________________________________________ Dye Class: Shopko PO #: _____________________________________________________________ Sample Size: ________________________________________ Ex Factory Date: ___________________________________________________________ Lot #: SKU #’s: _________________________________________________________________ Assortment #: _______________________________________ UPC #’s: _________________________________________________________________ Labeled Age Grade: __________________________________ Place of Manufacture (City/Provence/Country): ___________________________________ Country of Origin: ____________________________________ Date of Manufacture (MM/DD/YY): _____________________________________________
IV. TYPE OF LAB PERFORMANCE TESTS
Timing/Charge NORMAL (5-7 days) RUSH (2 days, 40% up charge) URGENT (1 day, 100% up charge) CPSIA General Conformity Certificate CPSIA Applicable rules review and GCC under BVCPS GCC services scope
Please provide name, full mailing address, e-mail, & telephone number of the person maintaining test records in support of the certification
Tests Requested IV & V (*Vendor MUST indicate previous report #’s on the line provided and Check all that apply!) Piecegoods Test ______________________________ _________ Component/Trim Test ________________________________________
Garment Test (*) ________________________________________ Retest (*) ____________________________________________________
Piecegoods / Garment Test _______________________________ Full Product Test (Home Textiles * Accessories ONLY) ________________
Samples for Color-Staining only ____________________________ Other (specify) _______________________________________________
Piecegoods – Additional Colorfastness Test (*) ___________________________________________________________________________________
Additional Comments (from vendor): ______________________________________________________________________________________ _____________________________________ ________________________________________________________________________________
V. TYPE OF SPECIAL QUALITY & PERFORMANCE CLAIMS
Pilling Resistance: _______________________________ Wicking Properties _____________________________________
Waterproof (Repellant) ___________________________ Water Resistant _______________________________________
Stain Free (Stain Guard) ________________________ Stain Resistant ________________________________________
Wrinkle Free __________________________________ Wrinkle Resistant ______________________________________
Resists Color Fading ___________________________ Anti-microbial/Anti-bacterial _______________________________
Bleach Safe _______ ___________________________ Other ________________________________________________
Additional Comments (from vendor): _________________________________________________________________________________
THIS TEST REQUEST IS SUBJECT TO THE CONDITIONS OF TESTING AS SET FORTH ON PAGE TWO. We request the above testing and/or services and agree that all testing and/or services will be carried out subject to BVCPS” scale of charges and turnaround times as set forth in the current price list at the time of testing and/or service delivery. Vendor Signature (required to process test) ________________________________________________________Date___________________
Please ensure to include page 2 when submitting the signed TRF
FOR OFFICE USE ONLY
REPORT # ____________ DATE IN: ____________ DATE OUT: ____________ COST: _____________
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-14
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-15
HARDLINES EVALUATION REQUEST FORM (HERF) FOR PRODUCT TESTING
*ALL SECTIONS OF THIS FORM MUST BE COMPLETED IN FULL AND SUBMITTED WITH EACH PRIVATE LABEL OR L.C. SKU SENT IN FOR TESTING. FORMS THAT ARE NOT LEGIBLE, NOT SIGNED IN SECTION 7 BELOW, OR ANY PERTINENT INFORMATION IS MISSING, TEST COMPLETION WILL BE DELAYED OR TEST
REJECTED. SEE ATTACHED LIST OF DEFINITIONS/PROCEDURES FOR COMPLETION OF THIS FORM.
SECTION 1. TESTING LABORATORY (see attached Category List) Bureau Veritas (MTL-Acts) Country: __________________________ Quotation required prior to testing (allow 3-5 business days)
SECTION 2. TURNAROUND TIME REQUESTED NORMAL (approx. 5-7 days) RUSH (2-3 days, 40% up charge) URGENT (1 day, 100% up charge)
SECTION 3. PRODUCT LABEL (Brand or Private Label Name) * Product Label: Shopko Private Label (Choose One of the Below) If one is not selected, Testing will go on HOLD
Bath, Body, etc. Cannon Club Grand Eerie Alley Envision Studio Green Soda NorthCrest NorthCrest Home Studio A Trimmery Gourmet Harvest Treasures dorm@edu My Style Urbanology N/A If one of the above does not apply – Please select N/A and complete Vendor Name Brand: ____________________________
SECTION 4. BUYER INFORMATION *Shopko Buyer last name: _____________________________________ *Department: ________________________ SECTION 5. PRODUCT INFORMATION *Product Description: ___________________________________________________________________________________________ Sample Size: __________________ *Place of Manufacture (City/Province/Country): ______________________________________ Date of Manufacture (MM/DD/YY): ____________________ Labeled Age Grade: ______________________________________ _________________________________________________________________________________________________________________________ Shopko Product Information *Sku: ________________________________ *PO#: _________________________ *Ex-Factory Date of PO: _______________ *UPC: _______________________________ *Assortment #: ___________________________________
*Shopko Product Style # (Required for all Shopko private label products):________________*Lot#: _______________ _________________________________________________________________________________________________________________________ Mfr. Product Style # (REQUIRED): ______________ _________________________________________________________________________________________________________________________ *Product Status: Pre-purchase Pre-Production QA Audit Item Pre-Shipment In-Store Product UL License # (if applicable): __________________ Name Brand License Authorization? N/A Yes (attach copy) *SECTION 6. TYPE OF EVALUATION REQUESTED Full Product Test (Previous season test report # if applicable: ___________________) Package / Label Evaluation Only Retest (Previous unsatisfactory report #: ___________________) Comparative Evaluation Lead In Surface Coating Total Lead in Substrate Materials Colorfastness Shrinkage Phthalates Appearance After Wash Flammability CA Prop 65 Document Review – 1 sample must be submitted and may be returned at vendor’s expense (Vendor BV Report #: ______________________ SECTION 7. VENDOR INFORMATION *Vendor Name: __________________________________ Agent Name (if applicable): __________________________________ *Vendor Address: ____________________________________________________________________________________________________ Invoice Recipient: _____________________________ Invoice Recipient Address: ___________________________________________ *Factory Name / Manufacturer Name: _____________________________________________________________________________________ *Factory Address: ___________________________________________________________________________________________________ *Vendor Contact: _______________________________________ Phone: _______________________ E-mail: _____________________ CPSIA General Conformity Certificate
CPSIA Applicable rules review and GCC under BVCPS GCC services scope Please provide name, full mailing address and telephone number of the person maintaining test records in support of the certification: ________________________________________________________________________________________________________________ All testing is VENDOR PAID according to the following: 1) All overseas vendor/agents and new domestic vendor/agents – prepayment is required. 2) Current domestic vendor/agents – charged back to Vendor #: ______________________________ NOTE: All merchandise shipped must meet applicable government/industry and Shopko standards and must reflect identical quality, composition, and/or content. Your signature below verifies your understanding that any product which fails to meet the above requirements may be returned for full credit, a 10% consolidation fee, and any in or outbound freight charges.
THIS TEST REQUEST IS SUBJECT TO THE CONDITIONS OF TESTING SET FORTH ON THE FOLLOWING PAGE. We request the above testing and/or services and agree that all testing and/or services will be carried out subject to BVCPS’ scale of charges and turnaround times as set forth in the current price list at the time of testing and/or service delivery.
AUTHORIZED VENDOR SIGNATURE: ____________________________________________________ Date: ____________________ Please ensure to include page 2 when submitting the signed TRF
FOR LAB USE ONLY This section must be completed by lab when item arrives at facility, then e-mailed to Shopko Quality Assurance. Lab must inform vendor & Shopko if test is being placed on hold or cannot be performed for any reason.
Date Received: ________________________Test Report #: __________________________Test report due date: ___________________ If test cannot be completed in turn around time indicated, please indicate reason: ______________________________________________ Laboratory performing test: __________________________Country: _____________________________Total Cost of Test: US$______________
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-16
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-17
PROCEDURES / DEFINITIONS FOR COMPLETING HERF FORM Section 1 – Testing Laboratory Refer to the attached category list to determine the testing lab location to be used. Indicate the country in the space provided.
Section 2 – Turn-Around Time Requested Although testing labs will try to accommodate “Rush” & “Urgent” test requests, no guarantee can be made to honor those requests. It is recommended that the item be submitted for testing no later than 4 weeks prior to the first ex-factory ship date to ensure the item is approved and ships on time. “Urgent” testing may not be available for some items due to various test procedures. Check with appropriate lab on turn-around times.
Section 3 –Product Label Product Label: Indicate the products label – either Shopko private label or name brand One must be selected or testing will go on hold Section 4 – Buyer Information Indicate the Shopko Buyer’s last name and the department number.
Section 5 – Production Information
• Product Description: List the product description as it appears on the purchase order • Sample Size: The size of the item, if applicable. • Country of Production: The place this object will be manufactured. • Number of Samples submitted for test: The number of samples submitted for test (check the test protocol
to determine how many samples need to be submitted to complete the testing. • Shopko Product Information: If the product will be distributed to Shopko, ensure Shopko SKU number,
purchase order numbers, and both manufacturer style numbers (Shopko’s and manufacturer as they appear on the purchase order) are listed in the appropriate spaces for Shopko.
• Product Status: Indicate the current status of the item: -Pre-purchase: Item has not yet been ordered by Shopko but testing is required to determine if item will be ordered by Shopko pending test results.
-Pre-Production: Item has been ordered by Shopko and has a purchase order.
-QA Audit Item: For Shopko use only. This will be indicated for HBA, OTC or HC store audits.
-Pre-Shipment: Shipment does not reflect the approved sample. Re-testing is required to ensure shipment is approved.
-In-Store Product: If an item is recalled by government agency or voluntarily recalled by vendor and must be tested.
• UL License #: If the item has a UL number (Underwriter’s Laboratories) indicate that number. • Name Brand Authorization: A form must be submitted stating approval of all brand merchandise. An
example; Disney products must accompany a letter stating Disney authorizes the use of their brand on the product.
Section 6 – Type of Evaluation Needed
• Full Product Test (previous season test report # if applicable): Select when submitting product for customary testing of initial production. Indicate previous year’s report number if applicable.
• Retest (Previous unsatisfactory test report #): Select when submitting product for re-testing due to previous unsatisfactory results from Shopko. Indicate the previous unsatisfactory test report number so testing lab knows exactly what failed from the previous test.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-18
• Package/Label Evaluation: Select when submitting private label packaging and labeling to be evaluated for conformance to Shopko’s private label graphics and quality standards if not previously submitted for Full Product Test. Lab will evaluate all samples/labeling to ensure Shopko standards are met.
• Comparative Evaluation: Select when submitting product for comparison of same or similar styles from various manufacturers. Lab will test all products and generate a test report comparing and rating the products. Both the private label and national brand items must be submitted for an accurate comparative evaluation.
• Lead Test Only: Select this when Shopko Vendor Compliance Team has requested you to do so either through a non-approval or through assortment testing.
• Colorfastness: Select this when Shopko Vendor Compliance Team has requested you to do so either through a non-approval or through assortment testing.
• Shrinkage: Select this when Shopko Vendor Compliance Team has requested you to do so either through a non-approval or through assortment testing.
Section 7 – Vendor Information/Agreement The actual vendor information must be listed as the vendor name. The factory name should only be listed where indicated. The vendor’s address, contact, phone, and e-mail address must be listed. HERF must be signed by the vendor to acknowledge vendor is aware that all testing fees are the responsibility of the vendor. This form is also an agreement made by the vendor that the item being tested is an actual representation of the entire shipment.
FOR LAB USE ONLY The testing lab will indicate the date the sample is received, the test report number, due date for the test report, and any reasons why test cannot be performed in the time frame requested. It is the responsibility of the testing lab to notify Shopko and Vendor/Agent if any pertinent information is missing and test cannot be performed via an “On Hold Memo”. Testing lab will also indicate their name, country location and total cost for Shopko accounting purposes.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-19
TEST REQUEST FORM HEALTH, BEAUTY, HOUSEHOLD, FOOD
& BATH BODY ETC PRODUCTS
Please type or print in BLOCK LETTERS Submitting For (client name)
Purchase Order No.
Submitter (if different from above)
Submitter Address
City
State
Zip
Phone (
)
Fax (
)
E-mail address
Report Recipient
Invoice Recipient
BV Contact
Report Copies To
SAMPLE INFORMATION: Sample Description
No. of Samples
UPC No.
Size
Item No.
Country of Origin
Assortment #
Lot No.
Expiration Date
Name of Manufacturer
Manufacturer Address Telephone No.
Place of Manufacture (City/Province/Country) Date of Manufacture (MM/DD/YY)
Country of Distribution
Labeled Age Grade
PRODUCT LABEL: (Check One)
Shopko Label ______________ Bath Body & Etc _______________________
SERVICE REQUIRED: (Check One) If we cannot accommodate your RUSH Request, you will be notified
NOTNOTnotified
Regular (Next 10 Business Days) PLEASE NOTE
Next 5 Business Days from receipt of sample (50% Surcharge; Sample Receipt by 12:00 noon)
Some products / testing may require more than 10 Business Days Next Business Days from receipt of sample (100% Surcharge; Sample Receipt by 10:30 am)
Same Business (175% Surcharge; Sample Receipt by 10:30 am) If this is a Retest for a previous non-compliance, please provide the previous Technical Report No.
TESTS TO BE CONDUCTED (Check Applicable Box(es)
National Brand Comparison According to Test Package (Specify National Brand)
Performance Only (Specify N.B. or Indicate Evaluation)
Evaluation on Own Merit (No N.B.)
Active Ingredients Only (Specify) Other Tests (Specify)
If this is a customer complaint, please attach details
Remarks
CPSIA General Conformity Certificate CPSIA Applicable rules review and GCC under BVCPS GCC services scope
Please provide name, full mailing address, e-mail address and telephone number of the person maintaining test records in support of the certification.
Date
Authorized Signature
Questions regarding testing and/or services should be directed to the Contact listed above or the HBHF Dept. Client Service Representative.
Please include a completed test request form with each carton of samples and forward to: Bureau Veritas Consumer Products Services, Inc. 100 Northpoint Parkway, Buffalo, NY 14228-1884 Tel: (716) 505-3300 Fax: (716) 505-3301 www.bureauveritas.com/cps
Lab use only:
Sample No. __________
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-20
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-21
Bulk Fabric/Creative/Color Submittal Evaluation Form DATE SENT BY VENDOR: ATTENTION: SHOPKO STYLE #:
VENDOR NAME: AGENT OFFICE: AGENT CONTACT NAME: EX-FACTORY DATE: FABRICATION/WEIGHT: FIBER CONTENT: CONSTRUCTION/YARN SIZES: SPECIAL FINISH: Mechanical/Chemical FULL FEED SPANDEX: TRIM DESCRIPTION:
COLOR NAME/ARTWORK NAME : (one color per page)
SUBMIT # : 1, 2, 3, (circle one) TYPE OF EVALUATION NEEDED (check one):
BULK FABRIC/COLOR/DESIGN: ________________________________________________
BULK TRIM: ____________________________________ SPECIAL REMARKS:
*BULK SWATCH SAMPLE MUSTBE AT LEAST 6” LONG X 6” WIDE. *ATTACH SAMPLE TO THIS AREA.
SHOPKO’S COMMENTS:
Color Manager: ________________________________________________________________________________
Date: _____________________________________________________________________________________________
Technical Design: ______________________________________________________________________________
Date: _____________________________________________________________________________________________
Creative Design: _______________________________________________________________________________
Date: _____________________________________________________________________________________________
APPROVED CONDITIONALLY APPROVED NOT APPROVED
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-22
Initial – Lab Dip Color Submit & Evaluation Form
DATE SENT BY VENDOR:
SHOPKO STYLE #: VENDOR NAME:
AGENT OFFICE:
AGENT CONTACT NAME:
E-MAIL ADDRESS:
FAX NUMBER:
DEPT #:
EX-FACTORY DATE:
FABRICATION NAME:
FIBER CONTENT:
TRIM DESCRIPTION:
COLOR NAME : (one color per page)
SUBMIT # : 1, 2, 3, 4, 5 (circle one)
TYPE OF EVALUATION NEEDED: (check one)
LAB DIP
YARN DIP/ YARN SOCKS
TRIM SAMPLE: __________________________________
OTHER (LIST BELOW): __________________________________________________
SPECIAL REMARKS:
________________________________________________________________
*LAB DIP SIZE MUST BE AT LEAST 2“X 2“.
DIP LETTER: ________
APPROVED COND-APP NOT APP
SHOPKO’S COMMENTS: ____________________________
DIP LETTER: ________
APPROVED COND-APP NOT APP
SHOPKO’S COMMENTS: ___________________________
DIP LETTER: _______
APPROVED COND-APP NOT APP
SHOPKO’S COMMENTS: ____________________________
DIP LETTER: ________
APPROVED COND-APP NOT APP
SHOPKO’S COMMENTS: ____________________________
DIP LETTER: ________
APPROVED COND-APP NOT APP
SHOPKO’S COMMENTS:________________________
DIP LETTER: ________
APPROVED COND-APP NOT APP
SHOPKO’S COMMENTS:_________________________
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-23
DATE SENT BY VENDOR:
DATE RECEIVED BY SHOPKO:
ATTENTION:
SHOPKO STYLE #:
VENDOR NAME:
AGENT OFFICE:
AGENT CONTACT NAME:
E-MAIL ADDRESS:
FAX NUMBER:
DEPT #:
EX-FACTORY DATE:
COLOR WAY & ARTWORK NAME : (one per page)
SUBMIT # : 1, 2, 3, 4, 5 (circle one)
TYPE OF SAMPLE SUBMITTED (check one):
PRINT STRIKE OFF
YARN DYE BIT LOOM
SCREEN PRINT
APPLIQUE
EMBROIDERY
PATCH
OTHER (list below):
SPECIAL REMARKS: ________________________________________________________________
ATTACH SAMPLE TO THIS AREA
SHOPKO’S COMMENTS:
APPROVED CONDITIONALLY APPROVED NOT APPROVED
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-24
DATE SENT BY VENDOR:
DATE RECEIVED BY SHOPKO:
ATTENTION:
SHOPKO STYLE #:
VENDOR NAME:
AGENT OFFICE:
AGENT CONTACT NAME:
E-MAIL ADDRESS:
FAX NUMBER:
DEPT #:
EX-FACTORY DATE:
COLOR WAY & ARTWORK NAME : (one per page)
SUBMIT # : 1, 2, 3, 4, 5 (circle one)
TYPE OF SAMPLE SUBMITTED (check one):
BULK PRINTED FABRIC
BULK YARN DYE FABRIC
BULK SCREEN PRINT
BULK APPLIQUE
BULK EMBROIDERY
BULK PATCH
BULK FOR OTHER (list below):
SPECIAL REMARKS:
________________________________________________________________
ATTACH SAMPLE TO THIS AREA
SHOPKO’S COMMENTS:
APPROVED CONDITIONALLY APPROVED NOT APPROVED
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-25
DATE SENT BY VENDOR: RECEIVED BY SHOPKO:
ATTENTION:
SHOPKO STYLE #:
VENDOR NAME: AGENT OFFICE: AGENT CONTACT NAME: E-MAIL ADDRESS: FAX NUMBER:
DEPT #: EX-FACTORY DATE:
FABRICATION NAME: FIBER CONTENT: TRIM DESCRIPTION:
SUBMIT # : 1, 2, 3, 4, 5 (circle one)
TYPE OF SAMPLE SUBMITTED (check one):
PRE-PRODUCTION (initial)
TOP OF PRODUCTION
BULK PRODUCTION MOCK UP FOR: _____________________________________________________________________
OTHER (list below):_________________________________________________________________________
____________________________________________________________________________________________ VENDOR’S SPECIAL REMARKS: ___________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________
SHOPKO’S COMMENTS: _________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________
APPROVED CONDITIONALLY APPROVED NOT APPROVED
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-26
DATE SENT BY VENDOR:
ATTENTION:
SHOPKO STYLE #:
VENDOR NAME: AGENT’S OFFICE: CONTACT NAME: E-MAIL ADDRESS:
EX-FACTORY DATE:
FABRICATION/WEIGHT: FIBER CONTENT: CONSTRUCTION/YARN SIZES: SPECIAL FINISH – Mechanical/Chemical: FULL FEED SPANDEX: TRIM DESCRIPTION:
SUBMIT # : 1, 2, 3, 4, 5 (circle one)
TYPE OF EVALUATION NEEDED (check one):
FABRIC QUALITY (list fabrication below):
___________________________________________________
TRIM QUALITY (list below):
___________________________________________________
MOCK UP SAMPLE FOR (list below):
___________________________________________________
OTHER (list below):
SPECIAL REMARKS: ___________________________________________________
___________________________________________________
SUBMIT LETTER: ____________________ *FABRIC SWATCHES MUST BE AT LEAST 6” LONG X 6” WIDE.
SHOPKO’S COMMENTS:
APPROVED CONDITIONALLY APPROVED NOT APPROVED
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-27
DATE SENT BY VENDOR:
DATE RECEIVED BY SHOPKO: ATTENTION: SHOPKO STYLE #: VENDOR NAME: AGENT OFFICE: AGENT CONTACT NAME: EMAIL ADDRESS: FAX NUMBER: DEPT #: EX-‐FACTORY DATE: FABRICATION NAME: FIBER CONTENT: TRIM DESCRIPTION: SUBMIT # : 1, 2, 3, 4, 5 (circle one)
TYPE OF SAMPLE SUBMITTED (check one): APPROVAL COMMENTS -‐ REQUESTED:
PRE-‐PRODUCTION (initial) Fit Comments
TOP OF PRODUCTION Quality/Make comments
BULK PRODUCTION Visual Aesthetics
MOCK UP FOR: Color & Design Comments _________________________________________________________________________________________________________
OTHER (list below):
VENDOR’S SPECIAL REMARKS:
SHOPKO’S COMMENTS: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
APPROVED CONDITIONALLY APPROVED NOT APPROVED
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-28
Please use this form when submitting prepress proofs for approval. Please fill out the following:
Submit # (circle one) 1 2 3 4 5
Attn: ____________________________________
Date Sent: _______________________________
Vendor Name: ____________________________
Agent Name: _____________________________
Contact: _________________________________
Email Address: ____________________________
Internal only (do not fill out)
Date Received:
Product:
Packaging Type:
Approved Not Approved Cond. Approval
Remarks:
Please Attach Proof Here
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-29
Please fill out the following:
Submit # (circle one) 1 2 3 4 5
Attn: ____________________________________
Date Sent: _______________________________
Vendor Name: ____________________________
Agent Name: _____________________________
Contact: _________________________________
Email Address: ____________________________
Internal only (do not fill out)
Date Received:
Product:
Packaging Type:
Approved Not Approved Cond. Approval
Remarks:
Please attach items here
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-30
Instructions: Fill in details, print and tape on to sample
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-31
Instructions: Fill in Details, print and tape on to sample
Shopko Private Brand & Trend Home textiles : Sample Submission
Sample For: Date: [ ] new item for review [ ] strike off approval [ ]1st [ ]2nd [ ]3rd [ ] pre production [ ]1st [ ]2nd [ ]3rd [ ] top sample [ ]1st [ ]2nd [ ]3rd
Vendor: Style Number:
Description: Size: Material: Weight: Finish: FOB: ELC: Made in: Color:
INTERNAL ONLY: Date Received: ☐APPROVED ☐CON. APPROVAL ☐NOT APPROVED Comments:
700 Pilgrim Way � PO Box 19060 � Green Bay, WI 54307-9060
Shopko Private Brand & Trend Home textiles : Sample Submission
Sample For: Date: [ ] new item for review [ ] strike off approval [ ]1st [ ]2nd [ ]3rd [ ] pre production [ ]1st [ ]2nd [ ]3rd [ ] top sample [ ]1st [ ]2nd [ ]3rd
Vendor: Style Number:
Description: Size: Material: Weight: Finish: FOB: ELC: Made in: Color:
INTERNAL ONLY: Date Received: ☐APPROVED ☐CON. APPROVAL ☐NOT APPROVED Comments:
700 Pilgrim Way � PO Box 19060 � Green Bay, WI 54307-9060
Shopko Private Brand & Trend Home textiles : Sample Submission
Sample For: Date: [ ] new item for review [ ] strike off approval [ ]1st [ ]2nd [ ]3rd [ ] pre production [ ]1st [ ]2nd [ ]3rd [ ] top sample [ ]1st [ ]2nd [ ]3rd
Vendor: Style Number
Description: Size: Material: Weight: Finish: FOB: ELC: Made in: Color:
INTERNAL ONLY: Date Received: ☐APPROVED ☐CON. APPROVAL ☐NOT APPROVED Comments:
700 Pilgrim Way � PO Box 19060 � Green Bay, WI 54307-9060
Shopko Private Brand & Trend Home textiles : Sample Submission
Sample For: Date: [ ] new item for review [ ] strike off approval [ ]1st [ ]2nd [ ]3rd [ ] pre production [ ]1st [ ]2nd [ ]3rd [ ] top sample [ ]1st [ ]2nd [ ]3rd
Vendor: Style Number
Description: Size: Material: Weight: Finish: FOB: ELC: Made in: Color:
INTERNAL ONLY: Date Received: ☐APPROVED ☐CON. APPROVAL ☐NOT APPROVED Comments:
700 Pilgrim Way � PO Box 19060 � Green Bay, WI 54307-9060
Shopko Private Brand & Trend Hardlines: Sample Submission
Sample For: Date: [ ] new item for review [ ] strike off approval [ ]1st [ ]2nd [ ]3rd [ ] pre production [ ]1st [ ]2nd [ ]3rd [ ] top sample [ ]1st [ ]2nd [ ]3rd
Vendor: Style Number:
Description: Size: Material: Weight: Finish: FOB: ELC: Made in: Color:
INTERNAL ONLY: Date Received: ☐APPROVED ☐CON. APPROVAL ☐NOT APPROVED Comments:
700 Pilgrim Way � PO Box 19060 � Green Bay, WI 54307-9060
Shopko Private Brand & Trend Hardlines: Sample Submission
Sample For: Date: [ ] new item for review [ ] strike off approval [ ]1st [ ]2nd [ ]3rd [ ] pre production [ ]1st [ ]2nd [ ]3rd [ ] top sample [ ]1st [ ]2nd [ ]3rd
Vendor: Style Number:
Description: Size: Material: Weight: Finish: FOB: ELC: Made in: Color:
INTERNAL ONLY: Date Received: ☐APPROVED ☐CON. APPROVAL ☐NOT APPROVED Comments:
700 Pilgrim Way � PO Box 19060 � Green Bay, WI 54307-9060
Shopko Private Brand & Trend Hardlines: Sample Submission
Sample For: Date: [ ] new item for review [ ] strike off approval [ ]1st [ ]2nd [ ]3rd [ ] pre production [ ]1st [ ]2nd [ ]3rd [ ] top sample [ ]1st [ ]2nd [ ]3rd
Vendor: Style Number:
Description: Size: Material: Weight: Finish: FOB: ELC: Made in: Color:
INTERNAL ONLY: Date Received: ☐APPROVED ☐CON. APPROVAL ☐NOT APPROVED Comments:
700 Pilgrim Way � PO Box 19060 � Green Bay, WI 54307-9060
Shopko Private Brand & Trend Hardlines: Sample Submission
Sample For: Date: [ ] new item for review [ ] strike off approval [ ]1st [ ]2nd [ ]3rd [ ] pre production [ ]1st [ ]2nd [ ]3rd [ ] top sample [ ]1st [ ]2nd [ ]3rd
Vendor: Style Number:
Description: Size: Material: Weight: Finish: FOB: ELC: Made in: Color:
INTERNAL ONLY: Date Received: ☐APPROVED ☐CON. APPROVAL ☐NOT APPROVED Comments:
700 Pilgrim Way � PO Box 19060 � Green Bay, WI 54307-9060
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-32
Instructions: Use on small items only (max. 3in diameter) Fill out the fields as needed, cut and tape on to bottom of sample.
SHOPKO PRIVATE BRANDS & TREND HOME/HARDLINES SAMPLE SUBMISSION
Date: Submit#: (new item) 1 2 3 4 Sample Type: Style #: Size: Material: Color: FOB: ELC: Internal Only: Comments:
Date Recvd: ☐Apprv. ☐Cond.Apprv. ☐NotApprv.
SHOPKO PRIVATE BRANDS & TREND HOME/HARDLINES SAMPLE SUBMISSION
Date: Submit#: (new item) 1 2 3 4 Sample Type: Style #: Size: Material: Color: FOB: ELC: Internal Only: Comments:
Date Recvd: ☐Apprv. ☐Cond.Apprv. ☐NotApprv.
SHOPKO PRIVATE BRANDS & TREND HOME/HARDLINES SAMPLE SUBMISSION
Date: Submit#: (new item) 1 2 3 4 Sample Type: Style #: Size: Material: Color: FOB: ELC: Internal Only: Comments:
Date Recvd: ☐Apprv. ☐Cond.Apprv. ☐NotApprv.
SHOPKO PRIVATE BRANDS & TREND HOME/HARDLINES SAMPLE SUBMISSION
Date: Submit#: (new item) 1 2 3 4 Sample Type: Style #: Size: Material: Color: FOB: ELC: Internal Only: Comments:
Date Recvd: ☐Apprv. ☐Cond.Apprv. ☐NotApprv.
SHOPKO PRIVATE BRANDS & TREND HOME/HARDLINES SAMPLE SUBMISSION
Date: Submit#: (new item) 1 2 3 4 Sample Type: Style #: Size: Material: Color: FOB: ELC: Internal Only: Comments:
Date Recvd: ☐Apprv. ☐Cond.Apprv. ☐NotApprv.
SHOPKO PRIVATE BRANDS & TREND HOME/HARDLINES SAMPLE SUBMISSION
Date: Submit#: (new item) 1 2 3 4 Sample Type: Style #: Size: Material: Color: FOB: ELC: Internal Only: Comments:
Date Recvd: ☐Apprv. ☐Cond.Apprv. ☐NotApprv.
SHOPKO PRIVATE BRANDS & TREND HOME/HARDLINES SAMPLE SUBMISSION
Date: Submit#: (new item) 1 2 3 4 Sample Type: Style #: Size: Material: Color: FOB: ELC: Internal Only: Comments:
Date Recvd: ☐Apprv. ☐Cond.Apprv. ☐NotApprv.
SHOPKO PRIVATE BRANDS & TREND HOME/HARDLINES SAMPLE SUBMISSION
Date: Submit#: (new item) 1 2 3 4 Sample Type: Style #: Size: Material: Color: FOB: ELC: Internal Only: Comments:
Date Recvd: ☐Apprv. ☐Cond.Apprv. ☐NotApprv.
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-33
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-34
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-35
Vendor Partnership Manual PRIVATE BRAND & TREND
09/30/15 7-36