C101/C102 CAST IRON PUMP/VALVE COMBINATION

Rugged Cast Iron ConstructionInterchangeable Parts Optional Mountings / ActuatorsHigh Performance / Low Cost

Dump Pump/Valve Ordering Specification

C102 - 2.5 - LH - M - 2

C101 Drive shaft mountC102 PTO Direct Mount

2.0 - 2.0" Gear width2.5 - 2.5" Gear width

RH - CW RotationLH - CCW Rotation

TECHNICAL DATAModelseries

C101

C102

Maximum psi

2500

2500

GPM@1800 RPM

2" 2.5" 39 48

39 48

MAXIMUMSPEED

2400

2400

PHP offers a complete line of rugged cast iron pump / valve combination for the dump truck and trailer industry. Units are available for SAE-B PTO mounting (C102) or remote drive shaft mounting (C101). Units are supplied with full flow adjustable main relief valves to protect the pump and cylinder from overloading and shock loads. A three position valve assembly controls the raising, holding and lowering of a single acting cylinder, control valve can be cab operated using mechanical cable actuation or air shift control. Installation can be either 2 line or three line type using the sleeve supplied see page E4.2 .

M- Manual actuatedA - Air actuated

2 - 2 Line installation3 - 3 Line installation

48

36

24

12

0 500 1000 1500 2000

2 1/2"

2"

C101/102

1800

CC

CC

C

C

CC

1" NPT(Return)

11/4" NPT(Inlet)

Dump Pump/ Valve Ordering Code G102 - 2.0 - LH - M - 2

M - Manual actuated A - Air ActuatedG101 Drive Shaft mount RH- C.W. RotationG102 PTO Direct Mount LH- C.C.W. Rotation 1.0 - 1.0" Gear Width 2 - 2 Line installation 1.5 - 1.5" Gear Width 3 - 3 Line installation 2.0 - 2.0" Gear Width

G101 / G102 SERIESCOMBINATION PUMP/VALVE

* Rugged Cast Iron Construction* Interchangeable Parts"Parker / Commercial - Permco - Muncie"* Opitonal Mountings / Actuators* High Performance / Low Cost

Model Displ. (in3/rev) Maximum US gpm @ 1800 rpm Maximum Number 1.0 1.5 2.0 PSI 1.0 1.5 2.0 Speed G101 1.97 2.96 3.94 2500 9.5 21 29 2400 rpm

G102 1.97 2.96 3.94 2500 9.5 21 29 2400 rpm

G101/G102/G104/G105

Offers G101 / G102 rugged cast iron combination gear pump / valveassemblies for the medium size dump and trailer applications. Units are availablefor SAE-B PTO mounting (G102) or remote drive shaft mounting (G101). Units aresupplied with a full flow adjustable main relief valve to protect the pump andcylinder from over pressure and shock loads. A three position valve assemblycontrols the raising and lowering of a single acting cylinder, The pump / valvecomes standard as manually operated & can be actuated by a cable control. ThePump/Valve can also be equipped with an air shift kit for actuation by air pressure.Installation can be either 2 line or 3 line configuration using the sleeve supplied .

G101 / G102Performance curves

G101 / G102 SERIESDIMENSIONS

10.56 + GW

6.88 + GW1.94

.9988/.9984 Dia.

5.381.

25

.319 / .312 Dia. Pin eye

1/2" -13 UNC - 2B THD x 1.00 Deep2 holes as outlined

1.75

Key (.25 x .38 x 1.25)

3.12

NeutralRaise Lower

.319 / .312 Dia. Pin eye Both ends

Inlet 11/4" NPT

Cylinder 3/4" NPT

Return 3/4" NPT

6.12

G101Weight1.0" Gear Width = 31 lbs1.5" Gear Width = 35 lbs2.0" Gear Width = 38 lbs

G102Weight1.0" Gear Width = 31 lbs1.5" Gear Width = 35 lbs2.0" Gear Width = 38 lbs

LowerRaiseNeutral .319 / .312 Dia.

Pin eye Both ends

Return 3/4" NPT

Cylinder 3/4" NPT

Inlet 11/4" NPT

6.12

4.00

4.16

11.38 + GW

6.88 + GW1.94

.38SAE-B SPLINE13 TEETH - 16/32 PITCHFLAT ROOT FIT

4.69 SQ

3.536 SQ.319 / .312 Dia. Pin eye

1.25

.62

Dimensions - inch

G GSERIESINSTALLATION INSTRUCTIONS

G GSERIESPARTS BREAKDOWN