c6994 parts - mattel...c f parts a. mountain half (with tunnel) b. mountain half (with trees) c....

6
Mile High Mountain Mile High Mountain C6994 www.fisher-price.com www.fisher-price.com

Upload: others

Post on 11-Mar-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: C6994 Parts - Mattel...C F Parts A. Mountain Half (with Tunnel) B. Mountain Half (with Trees) C. Platform with Fence D. Mountain Top E. Chalet F. Snowy Trees G. Plain Trees H. Lower

This product containssmall parts in itsunassembled state.Adult assemblyis required.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. PRINTED IN CHINA©2004 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. C6994a-0920

J

FCParts

A. Mountain Half (with Tunnel)B. Mountain Half (with Trees)C. Platform with FenceD. Mountain TopE. ChaletF. Snowy TreesG. Plain TreesH. Lower Spiral TrackI. Upper Spiral TrackJ. Straight TrackK. Small RampL 4 Support PillarsM. Guardrail (plain)N. Guardrail with TabsO. TunnelP. Tunnel Track SupportQ. Track with BarrierR. Lower RampS. Upper RampT. CrateU. Loader EngineV. #4 x 1/2" Screw – 8

Please keep this instruction sheetfor future reference, as it containsimportant information.Adult assembly is required.Tool required for assembly:Phillips screwdriver(not included).

A

H I

D

L

V

Q R

Mile High MountainMile High Mountain

C6994

www.fisher-price.comwww.fisher-price.com

x8Fastener Shown Actual Size

K

M N O

S T U

P

EB

WARNING

Questions? We'd like to hear from you!Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437,

8 AM - 6 PM EST Monday through Friday. Hearing-impairedconsumers using TTY/TDD equipment, please call 1-800-382-7470.Or, write to: Fisher-Price® Consumer Relations, 636 Girard Avenue,

East Aurora, New York 14052, U.S.A.

Wipe the toy with a clean damp cloth.

For other countries outside the United States:Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R

3W2. Great Britain: telephone 01628 500302. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag#870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William

Pickering Drive, Albany 1331, Auckland. Asia: Mattel East Asia Ltd, Room 1106, South Tower,World Finance Centre, Harbour City, Tsimshatsui, HK, China.

For layout ideas visit theGeoTrax™ section of

www.fisher-price.com

G

Page 2: C6994 Parts - Mattel...C F Parts A. Mountain Half (with Tunnel) B. Mountain Half (with Trees) C. Platform with Fence D. Mountain Top E. Chalet F. Snowy Trees G. Plain Trees H. Lower

This product containssmall parts in itsunassembled state.Adult assemblyis required.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. PRINTED IN CHINA©2004 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. C6994a-0920

J

FCParts

A. Mountain Half (with Tunnel)B. Mountain Half (with Trees)C. Platform with FenceD. Mountain TopE. ChaletF. Snowy TreesG. Plain TreesH. Lower Spiral TrackI. Upper Spiral TrackJ. Straight TrackK. Small RampL 4 Support PillarsM. Guardrail (plain)N. Guardrail with TabsO. TunnelP. Tunnel Track SupportQ. Track with BarrierR. Lower RampS. Upper RampT. CrateU. Loader EngineV. #4 x 1/2" Screw – 8

Please keep this instruction sheetfor future reference, as it containsimportant information.Adult assembly is required.Tool required for assembly:Phillips screwdriver(not included).

A

H I

D

L

V

Q R

Mile High MountainMile High Mountain

C6994

www.fisher-price.comwww.fisher-price.com

x8Fastener Shown Actual Size

K

M N O

S T U

P

EB

WARNING

Questions? We'd like to hear from you!Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437,

8 AM - 6 PM EST Monday through Friday. Hearing-impairedconsumers using TTY/TDD equipment, please call 1-800-382-7470.Or, write to: Fisher-Price® Consumer Relations, 636 Girard Avenue,

East Aurora, New York 14052, U.S.A.

Wipe the toy with a clean damp cloth.

For other countries outside the United States:Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R

3W2. Great Britain: telephone 01628 500302. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag#870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William

Pickering Drive, Albany 1331, Auckland. Asia: Mattel East Asia Ltd, Room 1106, South Tower,World Finance Centre, Harbour City, Tsimshatsui, HK, China.

For layout ideas visit theGeoTrax™ section of

www.fisher-price.com

G

Page 3: C6994 Parts - Mattel...C F Parts A. Mountain Half (with Tunnel) B. Mountain Half (with Trees) C. Platform with Fence D. Mountain Top E. Chalet F. Snowy Trees G. Plain Trees H. Lower

Load the crate intothe chalet.

Close the chalet door. The crate tumbles outthe door at the bottomof the mountain.

AssemblyMOUNTAIN TOP

SHORTEST LONGEST

UPPER SPIRAL TRACK

TUNNEL TRACK SUPPORT

GUARDRAIL WITH TABS

LOWER SPIRALTRACK

• Fit the two mountain halvestogether, as shown.

• Insert six screws into themountain assembly and tightenthe screws with a Phillips screw-driver. Do not over-tighten.

• Locate the other guardrailwith the tabs.

• Fit a tab on one end of theguardrail under the lowerspiral track, as shown.

• Bend the guardrail slightlyto fit the other two tabs tothe lower spiral track.

"Snap" the support pillars tothe underside of the spiraltrack assembly, as shown,working from the shortestpillar to the longest.

• “Snap” the platformwith the fence onto themountain assembly .

• “Snap” the plain treesinto the mountainassembly.

Slide the tab on theupper spiral track intothe groove in the lowerspiral track to join thetwo parts.

“Snap” the mountaintop onto the mountainassembly.

“Snap” the plainguardrail into theslots in the upperspiral track.

“Snap” the tunnel tracksupport to the tunnel.

“Snap” the snowy treesand the chalet into themountain top.

#4 x 1/2" Screw

• Fit the tabs on the upperramp into the slots in thelower ramp.

• Insert two screws intothe upper ramp. Tightentwo screws with aPhillips screwdriver.Do not over-tighten.

1 3 5

6 8 9 107

42

PLATFORMWITH FENCE

PLAIN GUARD RAIL

CHALET

SNOWY TREES

Track LayoutsTry making the suggested layout shown here.

#4 x 1/2" Screw

Assembly is now complete!

UPPER RAMP

TAB

Track pieces easily snap together.

Set up this way to connect tothe Tracktown Railway™ orCross Valley Junction™

(each sold separately).LOWER RAMP

1 2 3Load the Crate!

The more you collect, the morefun it gets!

Playsets and accessories sold separately and subject to availability.Two of each Elevation Track Packs used to make this configuration.

Add the C6449 Elevation TrackPack - Ramps (sold separately)to build this layout and climbto the top of the mountain.

For additional layout ideas,visit the GeoTrax™ sectionof www.fisher-price.com

PLAIN TREES

Page 4: C6994 Parts - Mattel...C F Parts A. Mountain Half (with Tunnel) B. Mountain Half (with Trees) C. Platform with Fence D. Mountain Top E. Chalet F. Snowy Trees G. Plain Trees H. Lower

Load the crate intothe chalet.

Close the chalet door. The crate tumbles outthe door at the bottomof the mountain.

AssemblyMOUNTAIN TOP

SHORTEST LONGEST

UPPER SPIRAL TRACK

TUNNEL TRACK SUPPORT

GUARDRAIL WITH TABS

LOWER SPIRALTRACK

• Fit the two mountain halvestogether, as shown.

• Insert six screws into themountain assembly and tightenthe screws with a Phillips screw-driver. Do not over-tighten.

• Locate the other guardrailwith the tabs.

• Fit a tab on one end of theguardrail under the lowerspiral track, as shown.

• Bend the guardrail slightlyto fit the other two tabs tothe lower spiral track.

"Snap" the support pillars tothe underside of the spiraltrack assembly, as shown,working from the shortestpillar to the longest.

• “Snap” the platformwith the fence onto themountain assembly .

• “Snap” the plain treesinto the mountainassembly.

Slide the tab on theupper spiral track intothe groove in the lowerspiral track to join thetwo parts.

“Snap” the mountaintop onto the mountainassembly.

“Snap” the plainguardrail into theslots in the upperspiral track.

“Snap” the tunnel tracksupport to the tunnel.

“Snap” the snowy treesand the chalet into themountain top.

#4 x 1/2" Screw

• Fit the tabs on the upperramp into the slots in thelower ramp.

• Insert two screws intothe upper ramp. Tightentwo screws with aPhillips screwdriver.Do not over-tighten.

1 3 5

6 8 9 107

42

PLATFORMWITH FENCE

PLAIN GUARD RAIL

CHALET

SNOWY TREES

Track LayoutsTry making the suggested layout shown here.

#4 x 1/2" Screw

Assembly is now complete!

UPPER RAMP

TAB

Track pieces easily snap together.

Set up this way to connect tothe Tracktown Railway™ orCross Valley Junction™

(each sold separately).LOWER RAMP

1 2 3Load the Crate!

The more you collect, the morefun it gets!

Playsets and accessories sold separately and subject to availability.Two of each Elevation Track Packs used to make this configuration.

Add the C6449 Elevation TrackPack - Ramps (sold separately)to build this layout and climbto the top of the mountain.

For additional layout ideas,visit the GeoTrax™ sectionof www.fisher-price.com

PLAIN TREES

Page 5: C6994 Parts - Mattel...C F Parts A. Mountain Half (with Tunnel) B. Mountain Half (with Trees) C. Platform with Fence D. Mountain Top E. Chalet F. Snowy Trees G. Plain Trees H. Lower

Load the crate intothe chalet.

Close the chalet door. The crate tumbles outthe door at the bottomof the mountain.

AssemblyMOUNTAIN TOP

SHORTEST LONGEST

UPPER SPIRAL TRACK

TUNNEL TRACK SUPPORT

GUARDRAIL WITH TABS

LOWER SPIRALTRACK

• Fit the two mountain halvestogether, as shown.

• Insert six screws into themountain assembly and tightenthe screws with a Phillips screw-driver. Do not over-tighten.

• Locate the other guardrailwith the tabs.

• Fit a tab on one end of theguardrail under the lowerspiral track, as shown.

• Bend the guardrail slightlyto fit the other two tabs tothe lower spiral track.

"Snap" the support pillars tothe underside of the spiraltrack assembly, as shown,working from the shortestpillar to the longest.

• “Snap” the platformwith the fence onto themountain assembly .

• “Snap” the plain treesinto the mountainassembly.

Slide the tab on theupper spiral track intothe groove in the lowerspiral track to join thetwo parts.

“Snap” the mountaintop onto the mountainassembly.

“Snap” the plainguardrail into theslots in the upperspiral track.

“Snap” the tunnel tracksupport to the tunnel.

“Snap” the snowy treesand the chalet into themountain top.

#4 x 1/2" Screw

• Fit the tabs on the upperramp into the slots in thelower ramp.

• Insert two screws intothe upper ramp. Tightentwo screws with aPhillips screwdriver.Do not over-tighten.

1 3 5

6 8 9 107

42

PLATFORMWITH FENCE

PLAIN GUARD RAIL

CHALET

SNOWY TREES

Track LayoutsTry making the suggested layout shown here.

#4 x 1/2" Screw

Assembly is now complete!

UPPER RAMP

TAB

Track pieces easily snap together.

Set up this way to connect tothe Tracktown Railway™ orCross Valley Junction™

(each sold separately).LOWER RAMP

1 2 3Load the Crate!

The more you collect, the morefun it gets!

Playsets and accessories sold separately and subject to availability.Two of each Elevation Track Packs used to make this configuration.

Add the C6449 Elevation TrackPack - Ramps (sold separately)to build this layout and climbto the top of the mountain.

For additional layout ideas,visit the GeoTrax™ sectionof www.fisher-price.com

PLAIN TREES

Page 6: C6994 Parts - Mattel...C F Parts A. Mountain Half (with Tunnel) B. Mountain Half (with Trees) C. Platform with Fence D. Mountain Top E. Chalet F. Snowy Trees G. Plain Trees H. Lower

This product containssmall parts in itsunassembled state.Adult assemblyis required.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. PRINTED IN CHINA©2004 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. C6994a-0920

J

FCParts

A. Mountain Half (with Tunnel)B. Mountain Half (with Trees)C. Platform with FenceD. Mountain TopE. ChaletF. Snowy TreesG. Plain TreesH. Lower Spiral TrackI. Upper Spiral TrackJ. Straight TrackK. Small RampL 4 Support PillarsM. Guardrail (plain)N. Guardrail with TabsO. TunnelP. Tunnel Track SupportQ. Track with BarrierR. Lower RampS. Upper RampT. CrateU. Loader EngineV. #4 x 1/2" Screw – 8

Please keep this instruction sheetfor future reference, as it containsimportant information.Adult assembly is required.Tool required for assembly:Phillips screwdriver(not included).

A

H I

D

L

V

Q R

Mile High MountainMile High Mountain

C6994

www.fisher-price.comwww.fisher-price.com

x8Fastener Shown Actual Size

K

M N O

S T U

P

EB

WARNING

Questions? We'd like to hear from you!Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437,

8 AM - 6 PM EST Monday through Friday. Hearing-impairedconsumers using TTY/TDD equipment, please call 1-800-382-7470.Or, write to: Fisher-Price® Consumer Relations, 636 Girard Avenue,

East Aurora, New York 14052, U.S.A.

Wipe the toy with a clean damp cloth.

For other countries outside the United States:Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R

3W2. Great Britain: telephone 01628 500302. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag#870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William

Pickering Drive, Albany 1331, Auckland. Asia: Mattel East Asia Ltd, Room 1106, South Tower,World Finance Centre, Harbour City, Tsimshatsui, HK, China.

For layout ideas visit theGeoTrax™ section of

www.fisher-price.com

G