ca workload automation se workload... · · 2015-12-17if you have comments or questions about ca...

Quick Reference Guide r11.3

CA Workload Automation SE

Second Edition

This Documentation, which includes embedded help systems and electronically distributed materials (hereinafter referred to as the “Documentation”), is for your informational purposes only and is subject to change or withdrawal by CA at any time. This Documentation is proprietary information of CA and may not be copied, transferred, reproduced, disclosed, modified or duplicated, in whole or in part, without the prior written consent of CA.

If you are a licensed user of the software product(s) addressed in the Documentation, you may print or otherwise make available a reasonable number of copies of the Documentation for internal use by you and your employees in connection with that software, provided that all CA copyright notices and legends are affixed to each reproduced copy.

The right to print or otherwise make available copies of the Documentation is limited to the period during which the applicable license for such software remains in full force and effect. Should the license terminate for any reason, it is your responsibility to certify in writing to CA that all copies and partial copies of the Documentation have been returned to CA or destroyed.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CA PROVIDES THIS DOCUMENTATION “AS IS” WITHOUT WARRANTY OF ANY KIND, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT WILL CA BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY LOSS OR DAMAGE, DIRECT OR INDIRECT, FROM THE USE OF THIS DOCUMENTATION, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST INVESTMENT, BUSINESS INTERRUPTION, GOODWILL, OR LOST DATA, EVEN IF CA IS EXPRESSLY ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH LOSS OR DAMAGE.

The use of any software product referenced in the Documentation is governed by the applicable license agreement and such license agreement is not modified in any way by the terms of this notice.

The manufacturer of this Documentation is CA.

Provided with “Restricted Rights.” Use, duplication or disclosure by the United States Government is subject to the restrictions set forth in FAR Sections 12.212, 52.227-14, and 52.227-19(c)(1) - (2) and DFARS Section 252.227-7014(b)(3), as applicable, or their successors.

Copyright © 2013 CA. All rights reserved. All trademarks, trade names, service marks, and logos referenced herein belong to their respective companies.

CA Technologies Product References

This document references the following CA Technologies products:

■ CA Workload Automation SE, formerly CA 7® Workload Automation

Contact CA Technologies

Contact CA Support

For your convenience, CA Technologies provides one site where you can access the information that you need for your Home Office, Small Business, and Enterprise CA Technologies products. At http://ca.com/support, you can access the following resources:

■ Online and telephone contact information for technical assistance and customer services

■ Information about user communities and forums

■ Product and documentation downloads

■ CA Support policies and guidelines

■ Other helpful resources appropriate for your product

Providing Feedback About Product Documentation

If you have comments or questions about CA Technologies product documentation, you can send a message to [email protected].

To provide feedback about CA Technologies product documentation, complete our short customer survey which is available on the CA Support website at http://ca.com/docs.

http://www.ca.com/support

mailto:[email protected]

http://ca.com/docs

http://ca.com/docs

Contents 5

Contents

Chapter 1: Introduction 7

Chapter 2: Commands 9

Inquiry Commands ..................................................................................................................................................... 10

System Commands ..................................................................................................................................................... 19

Work Flow Control Commands .................................................................................................................................. 26

Work Flow Display Commands ................................................................................................................................... 32

Schedule Scan Command ........................................................................................................................................... 35

Resolve Command ...................................................................................................................................................... 36

Text Editor Commands ............................................................................................................................................... 36

Alternate Edit Mode ............................................................................................................................................ 36

Full Edit Mode ..................................................................................................................................................... 38

Forecasting Commands .............................................................................................................................................. 40

Workload Balancing Commands ................................................................................................................................ 43

Workload Planning Commands .................................................................................................................................. 44

Automated Performance Analysis Commands ........................................................................................................... 45

Utility Commands ....................................................................................................................................................... 46

Chapter 3: Scheduled Override Statements 49

Chapter 4: Panels 51

Automated Recovery Facility Panels .......................................................................................................................... 51

Database Maintenance Panels ................................................................................................................................... 51

Queue Maintenance Panels ....................................................................................................................................... 54

Virtual Resource Management Panels ....................................................................................................................... 56

Utility Panels .............................................................................................................................................................. 57

Chapter 5: Reports 59

History Reports ........................................................................................................................................................... 59

Workload Planning Reports........................................................................................................................................ 61

CA Earl and CA Easytrieve Reports ............................................................................................................................. 61

Reports Available from Log History Data ............................................................................................................ 62

Reports Available From Database Backup .......................................................................................................... 65

Chapter 1: Introduction 7

Chapter 1: Introduction

This guide summarizes commands, panels, and reports for CA Workload Automation SE. The guide is intended as a quick reference guide for production and operations users who are familiar with CA Workload Automation SE. For more information about CA Workload Automation SE functions, see the following guides:

■ Command Reference Guide

■ Database Maintenance Guide

■ Primer

■ Report Reference Guide

Note: For information about reading syntax diagrams, see the Command Reference Guide.


Chapter 2: Commands

This section contains the following topics:

Inquiry Commands (see page 10) System Commands (see page 19) Work Flow Control Commands (see page 26) Work Flow Display Commands (see page 32) Schedule Scan Command (see page 35) Resolve Command (see page 36) Text Editor Commands (see page 36) Forecasting Commands (see page 40) Workload Balancing Commands (see page 43) Workload Planning Commands (see page 44) Automated Performance Analysis Commands (see page 45) Utility Commands (see page 46)

Inquiry Commands

10 Quick Reference Guide

Inquiry Commands

These commands provide information about the system, its components, and its operation, including database contents, catalog entries, queue information, job status, and schedule information.

Note: For more information, see the Command Reference Guide.

FLOWL

FLOW, LIST

HELP

No keywords

LACT

AGENT, CLS, CPUID, DRCLASS, DRMODE, JOB, LIST, NODE, SCHID, SEG, SEQ, ST, SYS

LACTR

AGENT, CLS, CPUID, JOB, LIST, MAINID, NODE, SCHID, SEQ, ST, SYS

LAGENT

AGENT, LIST

LARF

ARFSET, LIST

LARFQ

JOB

LCTLG

DSN, TZ, VOLSER

LDSN

DSN, DSNBR, LIST, USERS

LDTM

AGENT, CLS, JOB, LIST, NODE, OUTAGE, ST, SYS

LGVAR

JOB, LIST, NAME, SCHID, SYS

LIST

JOB, PROSE

LJCK

DATE, JOB, JCLLIB, LIST, MEM, SCHID, TIME

Inquiry Commands


LJCL

JOB

LJES

AGENT, CLS, CPUID, JOB, LIST, NODE, Q, ST, SYS

LJOB

ADATE, AGENT, ARFSET, ATIME, BDATE, BTIME, CLS, COND, CPU, CPUTIME, DDS, DRCLASS, DSNLEAD, DSNMSG, ELT, EXEC, HOLD, JCLID, JCLLIB, JCLOVRD, JOB, JOBLEAD, JOBNET, LATES, LIST, LMNTDATE, LMNTTIME, LMNTTYPE, LRUNDATE, LRUNTIME, LTERM, MAINID, MAINT, MEMBER, MSGCLASS, NODE, NXTCYC, OVRDLIB, OWNER, PARMLIB, PROMPTS, PROSE, PRTY, REGION, RELOAD, RESTARTS, RETAIN, RMS, RO, RQLIST, RQMTMSG, RUNS, SCHEDULE, STEPREST, STEPS, SYS, TP1, TP1C, TP1M, TP2, TP2C, TP2M, TZ, USERID, VERIFY

LJOBR

See LJOB for keywords. LJOBR has no LIST option.

LLIB

DSN, LIST, MEM

LLOCK

DSN, DSNBR, JOB, LIST, SYS

LNODE

LIST, NODE, SEQ, STATE

LNTWK

DSN, DSNBR, LIST, NW

LPDS

DSN, MEM, VOLSER

LPOST

JOB, LIST, NW, SEG, SEQ, ST, STN, SUBID

LPRE

JOB, LIST, NW, SEG, SEQ, ST, STN, SUBID

LPROS

DD, DSN, DSNBR, JOB, LIST, NW, SEG, STEP, SYS, UID

LPRRN

CLS, CPUID, JOB, LIST, SEG, SEQ, ST, SYS, TZ

LQ/LQUE

AGENT, CLS, CPUID, DRCLASS, DRMODE, JOB, LIST, NODE, SCHID, SEG, SEQ, ST, SYS, TZ

Inquiry Commands


LQP

AGENT, CLS, CPUID, JOB, LIST, NODE, SCHID, SEQ, ST, SYS

LQR


LRDY


LRDYP


LRDYR


LREQ


LREQP


LREQR


LRES

JOB, Q, SYS

LRLOG

DATE, JOB, LIST, NW, OPT, SCHID, SEQ, SPAN, ST, SUBID, SYS, TZ

LRMD

JOB, SEQ, ST, STN

LSCHD

DSNBR, JOB, LIST, NW, SCAL, ST, STN, SYS

LSYS

JOB, LIST, SYS

LWLB

LIST, MOD

LXCF

LIST

PRINT

SCAL, YEAR

Inquiry Commands


The following syntax diagram summarizes keyword values for these commands.

►►─┬───────────────────────────────┬─┬───────────────────────┬────────────────► └─ ,ADATE= ─┬─ yyddd ─────────┬─┘ └─ ,AGENT= ─┬─ * ◄ ───┬─┘ └─ (yyddd,yyddd) ─┘ ├─ agent ─┤ └─ mask ──┘ ►─┬─────────────────────────┬─┬─────────────────────────────┬────────────────► └─ ,ARFSET= ─┬─ * ◄ ────┬─┘ └─ ,ATIME= ─┬─ hhmm ────────┬─┘ ├─ arfset ─┤ └─ (hhmm,hhmm) ─┘ └─ mask ───┘ ►─┬───────────────────────────────┬─┬─────────────────────────────┬──────────► └─ ,BDATE= ─┬─ yyddd ─────────┬─┘ └─ ,BTIME= ─┬─ hhmm ────────┬─┘ └─ (yyddd,yyddd) ─┘ └─ (hhmm,hhmm) ─┘ ►─┬──────────┬─┬────────────────────────────┬─┬───────────────────────┬──────► └─ ,CLS=x ─┘ └─ ,COND= ─┬─ nnnn ────────┬─┘ └─ ,CPU= ─┬─ nn ──────┬─┘ └─ (nnnn,nnnn) ─┘ └─ (nn,nn) ─┘ ►─┬───────────────────────┬─┬─────────────────────────────────┬──────────────► └─ ,CPUID= ─┬─ * ◄ ───┬─┘ └─ ,CPUTIME= ─┬─ mmmss ─────────┬─┘ ├─ AGJ ───┤ └─ (mmmss,mmmss) ─┘ ├─ mask ──┤ ├─ smfid ─┤ └─ 7XPJ ──┘ ►─┬───────────────────────┬─┬──────────────┬─────────────────────────────────► └─ ,DATE= ─┬─ * ◄ ────┬─┘ └─ ,DD=ddname ─┘ ├─ *yyddd ─┤ └─ yyddd ──┘ ►─┬─────────────────────────┬─┬───────────────────────────┬──────────────────► └─ ,DDS= ─┬─ nnn ───────┬─┘ └─ ,DRCLASS= ─┬─ * ◄ ─────┬─┘ └─ (nnn,nnn) ─┘ ├─ @ANY ────┤ ├─ @NONE ───┤ ├─ drclass ─┤ └─ mask ────┘ ►─┬──────────────────────┬─┬──────────────────────────────────┬──────────────► └─ ,DRMODE= ─┬─ * ◄ ─┬─┘ └─ ,DSN= ─┬─ AUTO ───────────────┬─┘ ├─ YES ─┤ ├─ AUTO.DSnnnnnn ──────┤ └─ NO ──┘ ├─ AUTO.Dnnnnnnn ──────┤ ├─ dsname ─────────────┤ ├─ JDEP. ──────────────┤ ├─ JDEP.jobname ───────┤ ├─ NW. ────────────────┤ ├─ NW.network ─────────┤ ├─ NW.station.network ─┤ ├─ PP. ────────────────┤ ├─ PP.dsname ──────────┤ ├─ PP.jobname.JOB ─────┤ ├─ PP.job.step.dd ─────┤ ├─ PP.network.NW ──────┤ ├─ PP.system.SYS ──────┤ ├─ PP.userid ──────────┤ ├─ PRED. ──────────────┤ ├─ PRED.jobname ───────┤ ├─ TRGD. ──────────────┤ └─ TRGD.jobname ───────┘

Inquiry Commands


►─┬────────────────────────────┬─┬───────────────────────────┬───────────────► └─ ,DSNBR= ─┬─ DS* ────────┬─┘ └─ ,DSNLEAD= ─┬─ nn ──────┬─┘ ├─ DS0nnnnnn* ─┤ └─ (nn,nn) ─┘ ├─ DSnnnnnnnn ─┤ ├─ NW* ────────┤ ├─ NW00nnnnn* ─┤ ├─ NWnnnnnn ───┤ ├─ PP* ────────┤ ├─ PP00nnnnn* ─┤ ├─ PPnnnnnn ───┤ ├─ S* ─────────┤ ├─ SI* ────────┤ ├─ SI00nnnnn* ─┤ ├─ SInnnnnn ───┤ ├─ SJ* ────────┤ ├─ SJ00nnnnn* ─┤ ├─ SJnnnnnn ───┤ ├─ SO* ────────┤ ├─ SO00nnnnn* ─┤ └─ SOnnnnnn ───┘ ►─┬────────────────────┬─┬───────────────────────────┬───────────────────────► └─ ,DSNMSG= ─┬─ N ─┬─┘ └─ ,ELT= ─┬─ hhmm ────────┬─┘ └─ Y ─┘ └─ (hhmm,hhmm) ─┘ ►─┬──────────────────┬─┬──────────────────────────┬──────────────────────────► └─ ,EXEC= ─┬─ N ─┬─┘ └─ ,FLOW= ─┬─ * ◄ ───────┬─┘ └─ Y ─┘ ├─ flowname ──┤ └─ flowname* ─┘ ►─┬──────────────────┬─┬──────────────┬──────────────────────────────────────► └─ ,HOLD= ─┬─ N ─┬─┘ └─ ,JCLID=nnn ─┘ └─ Y ─┘ ►─┬──────────────────────────────┬─┬─────────────────────┬───────────────────► └─ ,JCLLIB= ─┬─ nnn ─────────┬─┘ └─ ,JCLOVRD= ─┬─ N ─┬─┘ └─ &xx...x ─┘ └─ Y ─┘ ►─┬─────────────────────────┬─┬───────────────────────────┬──────────────────► └─ ,JOB= ─┬─ * ◄ ───────┬─┘ └─ ,JOBLEAD= ─┬─ nn ──────┬─┘ ├─ jobname ───┤ └─ (nn,nn) ─┘ ├─ jobnumber ─┤ ├─ mask ──────┤ └─ NO ────────┘ ►─┬───────────────────────┬─┬───────────────────────────┬────────────────────► └─ ,JOBNET= ─┬─ * ◄ ──┬─┘ └─ ,LATES= ─┬─ nnn ───────┬─┘ ├─ name ─┤ └─ (nnn,nnn) ─┘ └─ mask ─┘

Inquiry Commands


►─┬───────────────────────┬─┬───────────────────────┬────────────────────────► └─ ,LIST= ─┬─ ACCUM ──┬─┘ └─ ,LIST= ─┬─ ONLY ───┬─┘ ├─ AGJOB ──┤ ├─ ONW ────┤ ├─ ALL ────┤ ├─ PERM ───┤ ├─ AVL ────┤ ├─ PRM ────┤ ├─ BYSID ──┤ ├─ PROS ───┤ ├─ CALS ───┤ ├─ Q ──────┤ ├─ CPU ────┤ ├─ RPTID ──┤ ├─ DEP ────┤ ├─ RQDSN ──┤ ├─ DEFS ───┤ ├─ RQEXCP ─┤ ├─ DEPJ ───┤ ├─ RQJOB ──┤ ├─ DSN ────┤ ├─ RQMT ───┤ ├─ ERRORS ─┤ ├─ RQNWK ──┤ ├─ EXTL ───┤ ├─ RQUSR ──┤ ├─ FLOW ───┤ ├─ RQVRM ──┤ ├─ INTL ───┤ ├─ SCHD ───┤ ├─ INW ────┤ ├─ SHORT ──┤ ├─ JCL ────┤ ├─ SIDnnn ─┤ ├─ JOB ────┤ ├─ SMF ────┤ ├─ JOBS ───┤ ├─ STATS ──┤ ├─ MERGE ──┤ ├─ STATUS ─┤ ├─ N ──────┤ ├─ STEPDD ─┤ ├─ NODD ───┤ ├─ STN ────┤ ├─ NODEFS ─┤ ├─ TRIG ───┤ ├─ NOLINK ─┤ ├─ USE ────┤ ├─ NORM ───┤ ├─ USERS ──┤ ├─ NOUSER ─┤ ├─ XJOB ───┤ ├─ NW ─────┤ └─ XPJOB ──┘ └─ NXTCYC ─┘

►─┬──────────────────────────────────┬───────────────────────────────────────► └─ ,LMNTDATE= ─┬─ yyddd ─────────┬─┘ └─ (yyddd,yyddd) ─┘ ►─┬────────────────────────────────┬─┬─────────────────────────┬─────────────► └─ ,LMNTTIME= ─┬─ hhmm ────────┬─┘ └─ ,LMNTTYPE= ─┬─ ANLZ ─┬─┘ └─ (hhmm,hhmm) ─┘ ├─ DBM ──┤ ├─ LOAD ─┤ └─ SMF ──┘ ►─┬──────────────────────────────────┬───────────────────────────────────────► └─ ,LRUNDATE= ─┬─ yyddd ─────────┬─┘ └─ (yyddd,yyddd) ─┘ ►─┬────────────────────────────────┬─┬───────────────┬───────────────────────► └─ ,LRUNTIME= ─┬─ hhmm ────────┬─┘ └─ ,LTERM=name ─┘ └─ (hhmm,hhmm) ─┘ ►─┬────────────────────────────────┬─┬───────────────────┬─┬───────────────┬─► └─ ,MAINID= ─┬─ ALL ◄ ─────────┬─┘ └─ ,MAINT= ─┬─ N ─┬─┘ └─ ,MEM=member ─┘ ├─ AGJ ───────────┤ └─ Y ─┘ ├─ agent jobtype ─┤ ├─ SYn ───────────┤ ├─ /SYn ──────────┤ ├─ -SYn ──────────┤ └─ XPJ ───────────┘ ►─┬──────────────────────────┬─┬─────────────────┬─┬───────────────┬─────────► └─ ,MEMBER= ─┬─ * ◄ ─────┬─┘ └─ ,MOD=UCC7Rxxx ─┘ └─ ,MSGCLASS=x ─┘ ├─ member ──┤ ├─ member* ─┤ └─ mask ────┘ ►─┬─────────────────────────┬─┬─────────────────────────┬────────────────────► └─ ,NAME= ─┬─ * ◄ ──────┬─┘ └─ ,NODE= ─┬─ nodename ─┬─┘ └─ variable ─┘ └─ mask ─────┘ ►─┬──────────────────────────┬─┬──────────────────────┬──────────────────────► └─ ,NW= ─┬─ * ◄ ─────────┬─┘ └─ ,NXTCYC= ─┬─ OFF ─┬─┘ ├─ networkname ─┤ └─ SKP ─┘ └─ mask ────────┘

Inquiry Commands


►─┬───────────────────┬──────────────────────────────────────────────────────► └─ ,OPT= ─┬─ 0 ◄ ─┬─┘ └─ 1 ───┘ ►─┬─────────────────────────────────────────────────────────┬────────────────► └─ ,OUTAGE= ─┬─ duration ───────────────────────────────┬─┘ ├─ (startdate,starttime,duration) ─────────┤ └─ (startdate,starttime,end date,endtime) ─┘ ►─┬─────────────────────┬─┬────────────────────────┬─────────────────────────► └─ ,OVRDLIB= ─┬─ N ─┬─┘ └─ ,OWNER= ─┬─ * ◄ ────┬─┘ └─ Y ─┘ ├─ owner ──┤ ├─ owner* ─┤ └─ mask ───┘ ►─┬───────────────────────────┬─┬─────────────────────┬──────────────────────► └─ ,PARMLIB= ─┬─ nnn ─────┬─┘ └─ ,PROMPTS= ─┬─ N ─┬─┘ └─ &xx...x ─┘ └─ Y ─┘ ►──┬──────────────────────┬─┬──────────────────────────┬──────────────────────► └─ ,PROSE= ─┬─ NO ◄ ─┬─┘ └─ ,PRTY= ─┬─ nnn ───────┬─┘ └─ YES ──┘ └─ (nnn,nnn) ─┘ ►─┬────────────────────┬─┬──────────────────────────────┬────────────────────► └─ ,Q= ─┬─ * ──────┬─┘ └─ ,REGION= ─┬─ nnnn ────────┬─┘ ├─ ALL ────┤ └─ (nnnn,nnnn) ─┘ ├─ ACT ────┤ ├─ PRN ────┤ ├─ RDY ────┤ ├─ RDYACT ─┤ ├─ REQ ────┤ ├─ REQACT ─┤ └─ REQRDY ─┘ ►─┬────────────────────┬─┬──────────────────────────────┬────────────────────► └─ ,RELOAD= ─┬─ N ─┬─┘ └─ ,RESTARTS= ─┬─ nnn ───────┬─┘ ├─ Y ─┤ └─ (nnn,nnn) ─┘ └─ X ─┘ ►─┬────────────────────┬─┬─────────────────┬─┬─────────────────┬─────────────► └─ ,RETAIN= ─┬─ N ─┬─┘ └─ ,RMS= ─┬─ N ─┬─┘ └─ ,RO= ─┬─ EQ ─┬─┘ └─ Y ─┘ └─ Y ─┘ ├─ LT ─┤ ├─ GT ─┤ ├─ GE ─┤ ├─ LE ─┤ ├─ NE ─┤ ├─ #S ─┤ ├─ IG ─┤ └─ 0 ──┘ ►─┬────────────────────┬─┬─────────────────────┬─────────────────────────────► └─ ,RQLIST= ─┬─ N ─┬─┘ └─ ,RQMTMSG= ─┬─ N ─┬─┘ └─ Y ─┘ └─ Y ─┘ ►─┬────────────────────────────┬─┬────────────┬──────────────────────────────► └─ ,RUNS= ─┬─ nnnn ────────┬─┘ └─ ,SCAL=xx ─┘ └─ (nnnn,nnnn) ─┘ ►─┬──────────────────────┬─┬───────────────────────┬─────────────────────────► └─ ,SCHEDULE= ─┬─ N ─┬─┘ └─ ,SCHID= ─┬─ 000 ◄ ─┬─┘ └─ Y ─┘ └─ nnn ───┘

Inquiry Commands


►──┬────────────────────────────────────┬─┬─────────────────────┬─────────────► └─ ,SEG= ─┬─ segment ──────────────┬─┘ └─ ,SEQ= ─┬─ AGENT ─┬─┘ └─ (segment,subsegment) ─┘ ├─ ALT1 ──┤ ├─ ALT2 ──┤ ├─ CA7 ───┤ ├─ DATE ──┤ ├─ DLTM ──┤ ├─ DOTM ──┤ ├─ JOB ───┤ ├─ NATV ──┤ ├─ NODE ──┤ ├─ NW ────┤ ├─ PRTY ──┤ ├─ REV ───┤ ├─ STATE ─┤ └─ SUBID ─┘ ►─┬──────────────────────────────────────────────────────────┬───────────────► └─ ,SPAN= ─┬─ current date ◄ ────────────────────────────┬─┘ ├─ date ──────────────────────────────────────┤ ├─ scope ─────────────────────────────────────┤ ├─ (start date,start time,scope) ─────────────┤ └─ (start date,start time,end date,end time) ─┘ ►─┬─────────────────────┬─┬─────────────────────────┬────────────────────────► └─ ,ST= ─┬─ * ◄ ────┬─┘ └─ ,STATE= ─┬─ FAIL ────┬─┘ ├─ ABND ───┤ ├─ OFF ─────┤ ├─ AGENT ──┤ ├─ OFFLINE ─┤ ├─ ARAE ───┤ ├─ ON ──────┤ ├─ ARF ────┤ ├─ ONLINE ──┤ ├─ ARFH ───┤ └─ STOP ────┘ ├─ ARFJ ───┤ ├─ CANC ───┤ ├─ CANCEL ─┤ ├─ CBAD ───┤ ├─ COMP ───┤ ├─ EXCP ───┤ ├─ EXP ────┤ ├─ FORCE ──┤ ├─ HELD ───┤ ├─ JAN ────┤ ├─ JCLO ───┤ ├─ JCLR ───┤ ├─ JUL ────┤ ├─ LATE ───┤ ├─ MANV ───┤ ├─ MJOB ───┤ ├─ MOD ────┤ ├─ NODE ───┤ ├─ NOID ───┤ ├─ NRV ────┤ ├─ REPEAT ─┤ ├─ REPLY ──┤ ├─ REPT ───┤ ├─ REQU ───┤ ├─ RPET ───┤ ├─ RSTR ───┤ ├─ RTRY ───┤ ├─ SKEL ───┤ ├─ SUBM ───┤ └─ WRSC ───┘ ►─┬──────────────────┬─┬──────────────────────┬──────────────────────────────► └─ ,STEP=stepname ─┘ └─ ,STEPREST= ─┬─ N ─┬─┘ └─ Y ─┘

Inquiry Commands


►─┬───────────────────────────┬─┬───────────────────────────┬────────────────► └─ ,STEPS= ─┬─ nnn ───────┬─┘ └─ ,STN= ─┬─ * ◄ ─────────┬─┘ └─ (nnn,nnn) ─┘ ├─ stationname ─┤ └─ mask ────────┘ ►─┬────────────────────────┬─┬──────────────────────────┬────────────────────► └─ ,SUBID= ─┬─ * ◄ ────┬─┘ └─ ,SYS= ─┬─ * ◄ ────────┬─┘ ├─ subid ──┤ ├─ systemname ─┤ ├─ subid* ─┤ └─ mask ───────┘ └─ mask ───┘ ►─┬──────────────┬─┬─────────────────────────┬───────────────────────────────► └─ ,TIME=hhmm ─┘ └─ ,TP1= ─┬─ nnn ───────┬─┘ └─ (nnn,nnn) ─┘ ►─┬──────────────────────────┬─┬──────────────────────────┬──────────────────► └─ ,TP1C= ─┬─ nnn ───────┬─┘ └─ ,TP1M= ─┬─ nnn ───────┬─┘ └─ (nnn,nnn) ─┘ └─ (nnn,nnn) ─┘ ►─┬─────────────────────────┬─┬──────────────────────────┬───────────────────► └─ ,TP2= ─┬─ nnn ───────┬─┘ └─ ,TP2C= ─┬─ nnn ───────┬─┘ └─ (nnn,nnn) ─┘ └─ (nnn,nnn) ─┘ ►─┬──────────────────────────┬─┬───────────────────┬─┬────────────────┬──────► └─ ,TP2M= ─┬─ nnn ───────┬─┘ └─ ,TZ= ─┬─ CA7 ──┬─┘ └─ ,UID=xxx...x ─┘ └─ (nnn,nnn) ─┘ └─ EXEC ─┘ ►─┬─────────────────────────────────┬─┬───────────────┬──────────────────────► └─ ,USERS= ─┬─ 0,32767 ◄ ───────┬─┘ └─ ,USERID=nnn ─┘ └─ minimum,maximum ─┘ ►─┬────────────────────┬─┬──────────────────┬─┬────────────┬─────────────────►◄ └─ ,VERIFY= ─┬─ N ─┬─┘ └─ ,VOLSER=xxxxxx ─┘ └─ ,YEAR=yy ─┘ └─ Y ─┘

System Commands


System Commands

These commands let the CA Workload Automation SE terminal operator perform various functions.


/AFM

No keywords

/AGENT

AGENT, FUNC, PERSIST, PROP

/ASSIGN

BARR, CPU, LTERM, MAINID, TERM

/AUTO

COUNT, INT, MSG

/BRO

MSG, TERM

/CHANGE

APPL, OPERID, PRTY, TERM

/CLOSE

GROUP, TERM

/COID

ID

/CONT

MSG

/COPY

LTERM

/DELAGNT

AGENTDAY, UPDATE

/DISPLAY

APPL, CPU, DB, FMTBLK, LINE, LTERM, POOLS, PRINT, Q, STATUS, TERM

/DRCLASS

ACT, CLASS

/DRMODE

DEFCLASS, MODE, RQMTS, TRIGGERS

System Commands


/EADMIN

EFROM, ENABLE, EREPLY, ETIMEOUT, TRC

/ECHO

MSG

/EMAIL

JOB, TO, TRC, TXT, VAR

/FETCH

No keywords

/GVAR

JOB, NAME, OPT, SCHID, SYS, VALUE

/IAS

FUNC, LOGDD, LOGTYPE

/JCL

ALT, DPROC, DSN, INDEX, LTERM, OPT

/LOG

DATA

/LOGOFF

TERM

/LOGON

NPW, password, PRM, UID, userid

/MSG

ID, LTERM, MSG

/NXTMSG

No keywords

/OPEN

GROUP, TERM

/OPERID

No keywords

/OPERIDS

ID

/PAGE

No keywords

System Commands


/PAnn

MSG

/PFnn

MSG

/PROF

EXRSLV, KEYS, R, ST

/PROFS

EXRSLV, ID, KEYS, R, ST

/PURGPG

LTERM

/REFRESH

MOD

/RELINK

APPL, FMTBLK, USERID

/RESET

No keywords

/SDESK

EVENT, JOB

/SHUTDOWN

DMPQ, Zn

/START

LINE, LTERM, MSG, TERM

/STATEMGR

ARM, OPSSSM

/STOP

LINE, LTERM, MSG, TERM

/SWAP

No keywords

/UID

R, LIST

/WLB

BARR, SET

System Commands


/WTO

MSG

/XCF

INST, OPT, SMF

/XTASK

MSG

System Commands



►►──┬────────────────┬─┬────────────────┬─┬───────────────────┬──────────────► └─ ,AGENTDAY=nn ─┘ └─ ,AGENT=agent ─┘ └─ ,ACT= ─┬─ ADD ─┬─┘ └─ DEL ─┘ ►─┬──────────────────────┬─┬───────────────────────────────────┬─────────────► └─ ,ALT= ─┬─ nnn ────┬─┘ └─ , ─┬─ A ────┬─ = ─┬─ ALL ──────┬─┘ ├─ xx...x ─┤ └─ APPL ─┘ ├─ xxxx ─────┤ └─ NO ─────┘ ├─ SASSx ────┤ ├─ SASSxx ───┤ ├─ SASSxxx ──┤ └─ SASSxxxx ─┘ ►─┬────────────────────┬─┬─────────────────────┬─ ,CLASS=(xx1,...,xx8) ──────► └─ ,ARM= ─┬─ NO ◄ ─┬─┘ └─ ,BARR= ─┬─ nnnn ─┬─┘ └─ YES ──┘ ├─ +nnn ─┤ └─ -nnn ─┘ ►─┬──────────────┬─┬────────────────────────┬────────────────────────────────► └─ ,COUNT=nnn ─┘ └─ ,CPU= ─┬─ ALL ──────┬─┘ ├─ UCC7IRDn ─┤ └─ UCC7SUBn ─┘ ►─┬───────────────────────────┬─┬───────────────────┬────────────────────────► └─ , ─┬─ D ────┬─ =xxx...x ─┘ └─ ,DB= ─┬─ LOG ──┬─┘ └─ DATA ─┘ └─ VSAM ─┘ ►─┬────────────────────────────┬─┬────────────────────────┬──────────────────► └─ ,DEFCLASS= ─┬─ @SYSTEM ─┬─┘ └─ ,DPROC= ─┬─ dsname ─┬─┘ └─ value ───┘ ├─ NO ─────┤ └─ *NONE* ─┘ ►─┬───────────────┬─┬──────────────────┬─┬────────────────────┬──────────────► └─ ,DSN=dsname ─┘ └─ ,EFROM=xxx...x ─┘ └─ ,ENABLE= ─┬─ Y ─┬─┘ └─ N ─┘ ►─┬───────────────────┬─┬────────────────┬─ ,EVENT=xxxxxx ───────────────────► └─ ,EREPLY=xxx...x ─┘ └─ ,ETIMEOUT=nn ─┘ ►─┬──────────────────────┬─┬─────────────────────────────────────┬───────────► └─ ,EXRSLV= ─┬─ NO ──┬─┘ └─ , ─┬─ FM ─────┬─ = ─┬─ ALL ──────┬─┘ └─ YES ─┘ └─ FMTBLK ─┘ ├─ SCALyy ───┤ ├─ SCALyyz ──┤ ├─ SCALyyzz ─┤ ├─ SFMxyy ───┤ ├─ SFMxyyy ──┤ └─ SFMxyyyy ─┘ ►─┬─────────────────────────┬─┬──────────────────┬───────────────────────────► └─ ,FUNC= ─┬─ AGLOGOFF ─┬─┘ └─ ,GROUP=xxxxxxx ─┘ ├─ AGLOGON ──┤ ├─ CLRFILES ─┤ ├─ LOGCLEAR ─┤ ├─ LOGPRINT ─┤ ├─ LOGRESET ─┤ ├─ LOGSET ───┤ ├─ LOGSTART ─┤ ├─ LOGSTOP ──┤ ├─ PING ─────┤ ├─ RECONFIG ─┤ ├─ REFRESH ──┤ ├─ SHUTDOWN ─┤ ├─ STARTCOM ─┤ └─ STOPCOM ──┘ ►─┬─────────────────────┬─┬───────────────────┬─┬───────────────────┬────────► └─ ,ID= ─┬─ ALL ────┬─┘ └─ ,INDEX=&xxx...x ─┘ └─ ,INT= ─┬─ 5 ◄ ─┬─┘ ├─ userid ─┤ └─ nnn ─┘ ├─ *ACT* ──┤ ├─ * ──────┤ └─ nnn ────┘

System Commands


►─┬──────────────┬─┬─────────────────────────┬───────────────────────────────► └─ ,INST=xxxx ─┘ └─ ,JOB= ─┬─ * ─────────┬─┘ ├─ jobname ───┤ ├─ jobnumber ─┤ └─ mask ──────┘ ►─┬────────────────────────┬─┬──────────────────────────────────┬────────────► └─ ,KEYS= ─┬─ CLEAR ───┬─┘ └─ , ─┬─ L ────┬─ = ─┬─ ALL ─────┬─┘ ├─ PROF ────┤ └─ LINE ─┘ ├─ xxxxxxx ─┤ ├─ PROFILE ─┤ └─ mask ────┘ └─ SAVE ────┘ ►─┬─────────────────┬─┬────────────────┬─────────────────────────────────────► └─ ,LOGDD=ddname ─┘ └─ ,LOGTYPE=nnn ─┘ ►─┬────────────────────────────────────┬─────────────────────────────────────► └─ , ─┬─ LT ────┬─ = ─┬─ ALL ──────┬─┘ └─ LTERM ─┘ ├─ MASTER ───┤ └─ xxxxxxxx ─┘ ►─┬───────────────────────────────────────────────────────────────────┬──────► └─ , ─┬─ M ───┬─ = ─┬─ xxx...x ───────────────────────────────────┬─┘ └─ MSG ─┘ ├─ PROMPTS ───────────────────────────────────┤ ├─ (functionname,taskname ─┬────────────┬─ ) ─┤ │ └─ ,cmdtext ─┘ │ └─ mask ──────────────────────────────────────┘ ►─┬────────────────────────────────┬─┬────────────────────────┬──────────────► └─ , ─┬─ MA ─────┬─ = ─┬─ SY* ─┬─┘ └─ ,MOD= ─┬─ MSGRCNTL ─┬─┘ └─ MAINID ─┘ └─ SYn ─┘ ├─ SERVDESK ─┤ └─ xxxxxxxx ─┘ ►─┬─────────────────────┬─ ,NAME=variable ─┬─────────────────┬───────────────► └─ ,MODE= ─┬─ DR ───┬─┘ └─ ,NPW=xxxxxxxx ─┘ └─ NORM ─┘ ►──┬──────────────────────────┬─┬───────────────────────┬─────────────────────► └─ , ─┬─ O ──────┬─ =opid ─┘ └─ ,OPSSSM= ─┬─ NO ◄ ─┬─┘ └─ OPERID ─┘ └─ YES ──┘ ►─┬───────────────────┬─┬────────────────────────┬───────────────────────────► └─ ,OPT= ─┬─ ADD ─┬─┘ └─ ,PERSIST= ─┬─ NO ◄ ─┬─┘ ├─ DEL ─┤ └─ YES ──┘ ├─ MOD ─┤ └─ UPD ─┘ ►─┬───────────────────────────────┬─┬───────────────────────────────┬────────► └─ , ─┬─ POOLS ─┬─ = ─┬─ ALL ─┬─┘ └─ , ─┬─ PR ────┬─ = ─┬─ ALL ─┬─┘ └─ PL ────┘ ├─ APG ─┤ └─ PRINT ─┘ └─ SCH ─┘ ├─ DSN ─┤ ├─ JOB ─┤ ├─ MSG ─┤ ├─ NSP ─┤ ├─ N31 ─┤ └─ RES ─┘ ►─┬────────────────┬─┬────────────────────┬─┬──────────────────────┬─────────► └─ ,PRM=xxx...x ─┘ └─ ,PROP=name=value ─┘ └─ , ─┬─ P ────┬─ =nn ─┘ └─ PRTY ─┘ ►─┬─────────────────┬─┬───────────────────────────┬──────────────────────────► └─ ,Q= ─┬─ ACT ─┬─┘ └─ ,R= ─┬─ uid name ──────┬─┘ ├─ ALL ─┤ └─ resource name ─┘ ├─ DQT ─┤ ├─ PRE ─┤ ├─ PRN ─┤ ├─ PST ─┤ ├─ RDY ─┤ ├─ REQ ─┤ ├─ SCR ─┤ └─ TRL ─┘

System Commands


►─┬─────────────────────┬─┬──────────────────────┬───────────────────────────► └─ ,RQMTS= ─┬─ DR ──┬─┘ └─ ,SET= ─┬─ CLASSx ─┬─┘ └─ ALL ─┘ ├─ INITS ──┤ ├─ MINJOB ─┤ ├─ ON ─────┤ ├─ OFF ────┤ ├─ T1TAV ──┤ ├─ T1MAX ──┤ ├─ T2TAV ──┤ └─ T2MAX ──┘ ►─┬─────────────────────┬─┬─────────────┬────────────────────────────────────► └─ ,SCHID= ─┬─ 0 ◄ ─┬─┘ └─ ,SMF=xxxx ─┘ ├─ nnn ─┤ └─ * ───┘ ►─┬─────────────────────────────────────┬─┬────────────────────────┬─────────► └─ , ─┬─ ST ─────┬─ = ─┬─ CA7 ──────┬─┘ └─ ,SYS= ─┬─ systemid ─┬─┘ └─ STATUS ─┘ ├─ DELETE ───┤ ├─ * ────────┤ ├─ DPROC ────┤ └─ mask ─────┘ ├─ DR ───────┤ ├─ EMAIL ────┤ ├─ HIJBNUM ──┤ ├─ HIJOB ────┤ ├─ JCL ──────┤ ├─ JCLVAR ───┤ ├─ KEY ──────┤ ├─ SDESK ────┤ ├─ SEC ──────┤ ├─ SECURITY ─┤ ├─ SUB ──────┤ └─ XPS ──────┘ ►─┬───────────────────────────────────┬─ ,TO=member ─────────────────────────► └─ , ─┬─ T ────┬─ = ─┬─ * ◄ ──────┬─┘ └─ TERM ─┘ ├─ **ALL** ──┤ ├─ ? ────────┤ ├─ ALL ──────┤ ├─ TCP/IP ───┤ ├─ xxxxxxxx ─┤ └─ mask ─────┘ ►─┬────────────────────────────┬─┬─────────────────┬─ ,TXT=member ───────────► └─ ,TRIGGERS= ─┬─ ALL ─────┬─┘ └─ ,TRC= ─┬─ Y ─┬─┘ ├─ DR ──────┤ └─ N ─┘ └─ NONEXEC ─┘ ►─┬───────────────────────┬─┬────────────────────────┬───────────────────────► └─ ,UPDATE= ─┬─ NO ◄ ─┬─┘ └─ , ─┬─ U ──────┬─ =xx ─┘ └─ YES ──┘ └─ USERID ─┘ ►─┬─────────────────┬─┬───────────────────────────┬──────────────────────────► └─ ,UID=resource ─┘ └─ , ─┬─ VAL ───┬─ =string ─┘ └─ VALUE ─┘ ►─┬───────────────────────────┬──────────────────────────────────────────────►◄ └─ ,VAR=(value1,...value8) ─┘

Work Flow Control Commands



Use these commands to monitor and modify jobs under CA Workload Automation SE control.

Note: For more information, see the Command Reference Guide and Database Maintenance Guide.

ADDRQ

DEPJOB, JOB, USR

ADDSCH

JOB, REF, TIME

AGFILE

JOB, LIST, NAME, NUMBER, OBJECT, OFFSET, STEPNUM, TYPE

ARFP

FORCE, JOB

CANCEL

FORCE, JOB, NW, REASON, SUBID

DEMAND/DEMANDH

ARFSET, CC, CLASS, COUNT, DATE, DEPJOB, DOTM, EXEC, INTERVAL, JCLID, JCLLIB, JOB, LATE, LEADTM, MAINID, PRTY, RMS, RO, SCHID, SET, STOP, TIME, TYPE

DIRECT

JOB, MAINID

DMDNW

DESC, JOB, LEADTM, NW, SCHID, SUBID

FLOWD

DATE, FLOW, JOBCNT, TIME

HOLD

JOB, Q

IN

FORCE, REF

IO

FORCE, REF



JCLOVRD

JOB, SET

JOBSTART

JOB, MODE

LOAD/LOADH

CLASS, DOTM, JCLID, JCLLIB, JOB, LATE, LEADTM, MAINID, SCHID, TIME

LOGIN

FORCE, INITS, JOB, NW, STATION, SUBID

LOGOUT

FORCE, INITS, JOB, NW, STATION, SUBID

NOPRMP

JOB, REF

NXTCYC

JOB, SET

OUT

No keywords

REF

No keywords

POST

DEPJOB, DSN, INTERNAL, JOB, NW, PREQ, USR

PRMP

JOB, REF

PRSCF

FORCE, JOB, RSRC

PRSQA

RSRC, INTERNAL

PRSQD

RSRC, INTERNAL

QJCL

No keywords

QM

No keywords



RELEASE

JOB, Q

REMIND

DATE, STATION, SUBID, TIME

REPLY

JOB, MSG

REQUEUE

CPU, FORCE, JOB, MAINID, NODE, Q, TYPE

RESTART

BYPGDG, CONDCD, FORCECOMP, JOB, LCC, LPSTP, LSTP, PROCEND, PROCESS, PROCSTRT, REASON, STPEND, STPSTRT, SUP11STP, USAGE

RSVP

JOB, NW, REF, STATION, SUBID

RUN/RUNH

ARFSET, CLASS, DOTM, EXEC, JCLID, JCLLIB, JOB, LATE, LEADTM, MAINID, RMS, SCHID, TIME, TYPE

RUNNW

DESC, JOB, LEADTM, NW, SCHID, SUBID

RUSH

JOB, REF

START

Q

STOP

Q

SUBMIT

EXPRESS, JOB

SUBSCH

JOB, REF, TIME

SUBTM

JOB, TIME

VERIFY

JOB, SET




►►──┬─────────────────────────────┬─┬──────────────────────┬───────────────────► └─ ,ARFSET= ─┬─ **NONE** ───┬─┘ └─ ,BYPGDG= ─┬─ CAT ─┬─┘ └─ arfsetname ─┘ ├─ NO ──┤ ├─ VER ─┤ └─ YES ─┘ ►─┬────────────┬─┬────────────┬─┬────────────────┬─┬───────────────┬─────────► └─ ,CC=nnnn ─┘ └─ ,CLASS=x ─┘ └─ ,CONDCD=nnnn ─┘ └─ ,COUNT=nnnn ─┘ ►─┬──────────────┬─┬──────────────────────┬─┬────────────────────┬───────────► └─ ,CPU=smfid ─┘ └─ ,DATE= ─┬─ +nn ───┬─┘ └─ ,DEPJOB=jobname2 ─┘ └─ yyddd ─┘ ►─┬──────────────────┬─┬───────────────────────────────┬─────────────────────► └─ ,DESC=xxxxxxxx ─┘ └─ ,DOTM= ─┬─ current time ◄ ─┬─┘ └─ hhmm ───────────┘ ►─┬────────────────────────┬─┬────────────────────┬─┬────────────────┬───────► └─ ,DSN= ─┬─ dsname ───┬─┘ └─ ,EXEC= ─┬─ NO ──┬─┘ └─ ,EXPRESS=YES ─┘ └─ nnnnnnnn ─┘ └─ YES ─┘ ►─┬──────────────────┬─┬─────────────────────┬───────────────────────────────► └─ ,FLOW=flowname ─┘ └─ ,FORCE= ─┬─ CMP ─┬─┘ └─ YES ─┘ ►─┬──────────────────────────┬─┬───────────────────┬─────────────────────────► └─ ,FORCECOMP= ─┬─ NO ◄ ─┬─┘ └─ ,INITS=xxxxxxxx ─┘ └─ YES ──┘ ►─┬────────────────────────┬─┬──────────────────┬─┬──────────────┬───────────► └─ ,INTERNAL=─┬─ NO ◄ ─┬─┘ └─ ,INTERVAL=hhmm ─┘ └─ ,JCLID=nnn ─┘ └─ YES ──┘ ►─┬────────────────────┬─┬─────────────────────────┬─┬─────────────┬─────────► └─ ,JCLLIB=&xxx...x ─┘ └─ ,JOB= ─┬─ ALL ───────┬─┘ └─ ,JOBCNT=0 ─┘ ├─ ALLP ──────┤ ├─ nnnn ──────┤ ├─ jobname ───┤ ├─ jobnumber ─┤ ├─ refnumber ─┤ └─ mask ──────┘ ►─┬────────────────────┬─┬─────────────┬─┬─────────────────────────┬─────────► └─ ,LATE= ─┬─ NO ──┬─┘ └─ ,LCC=nnnn ─┘ └─ ,LEADTM= ─┬─ 0100 ◄ ─┬─┘ └─ YES ─┘ └─ hhmm ───┘ ►─┬─────────────────────┬─┬───────────────────┬─┬──────────────────┬─────────► └─ ,LIST= ─┬─ NO ◄ ─┬─┘ └─ ,LPSTP=procname ─┘ └─ ,LSTP=stepname ─┘ ├─ ALL ──┤ ├─ HIS ──┤ └─ Q ────┘ ►─┬──────────────────────────┬───────────────────────────────────────────────► └─ , ─┬─ M ───┬─ =xxx...x ─┘ └─ MSG ─┘ ►─┬────────────────────────┬─┬──────────────────┬─┬───────────────────┬──────► └─ ,MAINID= ─┬─ ALL ◄ ─┬─┘ └─ ,MODE= ─┬─ A ─┬─┘ └─ ,NAME=file name ─┘ ├─ SYn ───┤ └─ I ─┘ ├─ /SYn ──┤ └─ -SYn ──┘ ►─┬─────────────────────────┬─┬──────────────────────────────┬───────────────► └─ ,NODE= ─┬─ * ◄ ──────┬─┘ └─ ,NUMBER= ─┬─ 1 ◄ ─────────┬─┘ ├─ nodename ─┤ └─ file number ─┘ └─ mask ─────┘ ►─┬──────────────────────────┬─┬───────────────────────┬─────────────────────► └─ ,NW= ─┬─ ALL ─────────┬─┘ └─ ,OBJECT=object-name ─┘ └─ networkname ─┘



►─┬───────────────────────────┬──────────────────────────────────────────────► └─ ,OFFSET= ─┬─ 0 ◄ ──────┬─┘ └─ nnnnnnnn ─┘ ►─┬──────────────────────────────────────┬─┬─────────────────────┬───────────► └─ ,PREQ= ─┬─ nnnn ──────────────────┬─┘ └─ ,PROCEND=procname ─┘ └─ ( ─ n1,n2,...,n11 ─ ) ─┘ ►─┬───────────────────────┬─┬──────────────────────┬─┬─────────────┬─────────► └─ ,PROCESS= ─┬─ P ◄ ─┬─┘ └─ ,PROCSTRT=procname ─┘ └─ ,PRTY=nnn ─┘ ├─ F ───┤ ├─ N ───┤ ├─ O ───┤ ├─ R ───┤ └─ S ───┘ ►─┬─────────────────┬─┬────────────────┬─┬───────────────────┬───────────────► └─ ,Q= ─┬─ ACT ─┬─┘ └─ ,REASON=text ─┘ └─ ,RMS= ─┬─ NO ──┬─┘ ├─ ALL ─┤ └─ YES ─┘ ├─ RDY ─┤ └─ REQ ─┘ ►─┬─────────────────┬─┬───────────────────────────────────┬──────────────────► └─ ,RO= ─┬─ EQ ─┬─┘ └─ ,REF= ─┬─ nnnnrrs ─────────────┬─┘ ├─ LT ─┤ │ ┌─ , ───────┐ │ ├─ GT ─┤ └─ ( ─▼─ nnnnrrs ─┴─ ) ─┘ ├─ GE ─┤ ├─ LE ─┤ ├─ NE ─┤ ├─ #S ─┤ ├─ IG ─┤ └─ 0 ──┘ ►─┬───────────────────────┬─┬───────────────────────┬────────────────────────► └─ ,RSRC=resource name ─┘ └─ ,SCHID= ─┬─ 001 ◄ ─┬─┘ └─ nnn ───┘ ►─┬───────────────────┬─┬────────────────────────┬───────────────────────────► └─ ,SET= ─┬─ NDB ─┬─┘ └─ ,STATION=stationname ─┘ ├─ NTR ─┤ ├─ OFF ─┤ ├─ ON ──┤ └─ SKP ─┘ ►─┬────────────────────────┬─┬──────────────┬────────────────────────────────► └─ ,STEPNUM=step number ─┘ └─ ,STOP=hhmm ─┘ ►─┬─────────────────────────────┬─┬──────────────────────────────┬───────────► └─ ,STPEND= ─┬─ stepname ───┬─┘ └─ ,STPSTRT= ─┬─ stepname ───┬─┘ └─ stepnumber ─┘ ├─ stepnumber ─┤ ├─ *CMT* ──────┤ ├─ *RERUN* ────┤ └─ *RESUBP* ───┘ ►─┬──────────────────────────┬─┬─────────────────────────┬───────────────────► └─ ,SUBID= ─┬─ ALL ──────┬─┘ └─ ,SUP11STP= ─┬─ NO ◄ ─┬─┘ └─ xxxxxxxx ─┘ └─ YES ──┘



►─┬──────────────────────┬─┬─────────────────────────┬───────────────────────► └─ ,TIME= ─┬─ hhmm ──┬─┘ └─ ,TYPE= ─┬─ CHLOG ────┬─┘ ├─ +hhmm ─┤ ├─ CHPROC ───┤ └─ mmmm ──┘ ├─ CHSTART ──┤ ├─ CLOCK ────┤ ├─ DELETE ───┤ ├─ DELETEB ──┤ ├─ DELETE1 ──┤ ├─ DELETE2 ──┤ ├─ DUMP ─────┤ ├─ END ──────┤ ├─ FILELIST ─┤ ├─ INFO ─────┤ ├─ JCL ──────┤ ├─ JOBLIST ──┤ ├─ LOG ──────┤ ├─ RES ──────┤ ├─ SPOOL ────┤ ├─ START ────┤ └─ TRACE ────┘ ►─┬───────────────┬─┬────────────────┬───────────────────────────────────────►◄ └─ ,USAGE=code ─┘ └─ ,USR=xxx...x ─┘

Work Flow Display Commands



These commands display jobs that have been brought into the queues for processing and let you change their status.


XPOST/XSPOST

FILL, JOB, NW, STN, SUBID

XPRE/XSPRE

FILL, JOB, NW, STN, SUBID

XQ

FILL, JOB, LIST, Q, SEQ, SYS

XQJ


XQM


XQN


XRQ

JOB, LIST

XRST

JOB

XUPD

JOB



The following syntax diagram summarizes keyword values for this command.

►►─┬───────────────────┬─┬─────────────────────────┬──────────────────────────► └─ ,FILL¹= ─┬─ C ─┬─┘ └─ ,JOB= ─┬─ * ◄ ───────┬─┘ ├─ E ─┤ ├─ jobname ───┤ ├─ F ─┤ ├─ jobnumber ─┤ ├─ H ─┤ └─ mask ──────┘ ├─ I ─┤ ├─ J ─┤ ├─ O ─┤ ├─ P ─┤ ├─ Q ─┤ ├─ R ─┤ ├─ S ─┤ ├─ U ─┤ ├─ V ─┤ └─ X ─┘ ►─┬─────────────────────┬─┬───────────────────────────┬──────────────────────► └─ ,LIST= ─┬─ ALL ──┬─┘ └─ ,NW= ─┬─ * ◄ ──────────┬─┘ ├─ ANY ──┤ ├─ networkname ──┤ ├─ BINT ─┤ └─ networkname* ─┘ ├─ EXT ──┤ ├─ HLD ──┤ ├─ INT ──┤ ├─ JCLO ─┤ ├─ JOB ──┤ ├─ NWK ──┤ ├─ REST ─┤ ├─ SKEL ─┤ ├─ SUB ──┤ ├─ USR ──┤ └─ VER ──┘ ►─┬───────────────────┬─┬───────────────────────┬────────────────────────────► └─ ,Q= ─┬─ REQ ◄ ─┬─┘ └─ ,SEQ= ─┬─ ENTRY ───┬─┘ ├─ ACT ───┤ ├─ JOBNAME ─┤ └─ RDY ───┘ └─ NUMBER ──┘ ►─┬────────────────────────────┬─┬────────────────────────┬──────────────────► └─ ,STN= ─┬─ * ◄ ──────────┬─┘ └─ ,SUBID= ─┬─ * ◄ ────┬─┘ ├─ stationname ──┤ ├─ subid ──┤ └─ stationname* ─┘ └─ subid* ─┘ ►─┬──────────────────────────┬───────────────────────────────────────────────►◄ └─ ,SYS= ─┬─ * ◄ ────────┬─┘ ├─ systemname ─┤ └─ mask ───────┘

¹ The following are descriptions of the parameters.

C

Cancel

E

Edit JCL

F

Go to restart panel or forced station login

H

Hold

I

Normal login



J

JCL override

O

Logout

P

Respond to prompt

Q

Requeue

R

Release

S

Submit time off

U

Update

V

Verification

X

Requirement post

Schedule Scan Command


Schedule Scan Command

This command displays the options that control the way CA Workload Automation SE scans the database looking for jobs and networks that are scheduled for processing. You can also use this command to change those options.


SSCAN

DATE, INCR, LEADTM, PEREND, PERSTART, QDWELL, REPRMPT, RETRY, SCAN, SPAN, TIME, XPRETRY


►►─┬───────────────┬─┬────────────┬─┬───────────────────────┬─────────────────► └─ ,DATE=yyddd ─┘ └─ ,INCR=hh ─┘ └─ ,LEADTM= ─┬─ 0 ◄ ──┬─┘ └─ mmmm ─┘ ►─┬────────────────┬─┬──────────────────┬─┬──────────────┬───────────────────► └─ ,PEREND=hhmm ─┘ └─ ,PERSTART=hhmm ─┘ └─ ,QDWELL=mm ─┘ ►─┬───────────────┬─┬─────────────┬─┬────────────────────┬───────────────────► └─ ,REPRMPT=mm ─┘ └─ ,RETRY=mm ─┘ └─ ,SCAN= ─┬─ ABR ─┬─┘ ├─ ARF ─┤ ├─ COM ─┤ ├─ HLD ─┤ ├─ LNG ─┤ ├─ REL ─┤ ├─ REP ─┤ ├─ RET ─┤ └─ SCH ─┘ ►─┬────────────┬─┬──────────────┬─┬───────────────┬──────────────────────────►◄ └─ ,SPAN=hh ─┘ └─ ,TIME=hhmm ─┘ └─ ,XPRETRY=mm ─┘

Resolve Command


Resolve Command

This command creates or changes schedules for jobs and networks that are to be processed on a date/time basis.


RESOLV

DUPDATE, JOB, NW, OLDYR, PRINT, SCAL, TEST, YEAR


►►─┬───────────────────────┬─┬────────────────────────┬───────────────────────► └─ ,DUPDATE= ─┬─ YES ─┬─┘ └─ ,JOB= ─┬─ * ────────┬─┘ └─ NO ──┘ ├─ jobname ──┤ └─ jobname* ─┘ ►─┬──────────────────────────────┬─┬────────────────────┬────────────────────► └─ ,NETWORK= ─┬─ NW. ────────┬─┘ └─ ,OLDYR= ─┬─ * ──┬─┘ └─ NW.network ─┘ └─ yy ─┘ ►─┬──────────────────────┬─┬───────────────────┬─────────────────────────────► └─ ,PRINT= ─┬─ NO ◄ ─┬─┘ └─ ,SCAL= ─┬─ * ──┬─┘ └─ YES ──┘ └─ xx ─┘ ►─┬──────────────────────┬─┬────────────┬────────────────────────────────────►◄ └─ ,TEST= ─┬─ YES ◄ ─┬─┘ └─ ,YEAR=yy ─┘ └─ NO ────┘

Text Editor Commands

Use these commands to create and change JCL for queued JCL or to add free-form documentation to the CA Workload Automation SE database.

Note: For more information, see the Database Maintenance Guide.

Alternate Edit Mode

The following commands are available in alternate edit mode.

BREAK [nn]

CLEAR

Copy i[,m,n,t]

Delete m[,n]

Edit

Edit LIST [m,n]



Edit /string/[m,n]

Edit /string1/string2/[m,n]

Edit /string1//[m,n]

Edit //string1/[m,n]

Edit x[,y]

EXIT

FEM [n]

INsert [m,i]

JCL

JCLL

JCLS

JCLSR

JCLSS

List [m,n]

Move i[,m,n,i]

RENUM m,i

SAVE

SCALE [OFF]

SR

SS

STATUS

TRACE EDIT|OFF

XSEQ [OFF]



Full Edit Mode

The following commands are available in full edit mode.

BOTtom

BREAK [nn]

COL [n,m]

Copy i[,m,n,t]

EXIT

FILL

FIND /xxx...x/[n,m]

HB [n]

HF [n]

Insert [m,i]

JCL

JCLL

JCLS

JCLSR

JCLSS

JCLxx nnn,yyddd,hhmm

MD [n]

MIXED



Move i[,m,n,t]

NOFILL

NONUM

NUM

PB[n]

PF[n]

RENUM m,i

RETURN

SAVE

SR

SS

STATUS

TOP

TRACE EDIT|OFF

UPPER

XSEQ [OFF]

Forecasting Commands



These commands forecast information. Use them to project the scheduled workload for a given period of time, graphically display the projected workload for successive short time intervals, or report on tapes and JCL overrides ahead of their actual submission time.


FALL

DRCLASS, DRMODE, FROM, JOB, JOBNET, LIST, LVL, MAINID, NW, RINT, SCHID, SEQ, SPAN, STN, SYS, TO, TRIG, TYPE

FJOB

DRCLASS, DRMODE, FROM, JOB, JOBNET, LIST, LVL, MAINID, NWOPT, RINT, SCHID, SEG, SEQ, SPAN, SYS, TO, TRIG, TYPE

FPOST

FROM, NW, RINT, SEQ, SPAN, STN, TO

FPRE


FQALL

DRCLASS, DRMODE, JOB, JOBNET, LIST, LVL, MAINID, NW, RINT, SEQ, SPAN, STN, SYS, TO, TRIG, TYPE

FQJOB

DRCLASS, DRMODE, JOB, JOBNET, LIST, LVL, MAINID, NWOPT, RINT, SEG, SEQ, SPAN, SYS, TO, TRIG, TYPE

FQPOST

NW, RINT, SEQ, SPAN, STN, TO

FQPRE


FQRES

DRCLASS, DRMODE, INT, JOB, JOBNET, LIST, LVL, NW, SPAN, STN, SYS, TO, TRIG

FQSTN


FQTAPE

DRCLASS, DRMODE, JOB, JOBNET, SPAN, SYS, TO, TRIG



FRES

DRCLASS, DRMODE, FROM, INT, JOB, JOBNET, LVL, LIST, NW, SCHID, SPAN, STN, SYS, TO, TRIG

FRJOB

DRCLASS, DRMODE, JOB, JOBNET, LIST, LVL, SCHID, SYS, TYPE

FRQJOB

DRCLASS, DRMODE, JOB, JOBNET, LIST, LVL, SCHID, SYS, TYPE

FSTN


FSTRUC

DRCLASS, DRMODE, FROM, JOB, JOBNET, LIST, LVL, SCHID, SYS, TRIG, TYPE

FTAPE

DRCLASS, DRMODE, FROM, JOB, JOBNET, SCHID, SPAN, SYS, TO, TRIG




►►─┬────────────────────────────────┬─┬──────────────────────┬────────────────► └─ ,DRCLASS=(class1,...,class8) ─┘ └─ ,DRMODE= ─┬─ YES ─┬─┘ └─ NO ──┘ ►─┬───────────────────────┬─┬─────────────┬──────────────────────────────────► └─ ,FROM=(mmddyy,hhmm) ─┘ └─ ,INT=hhmm ─┘ ►─┬─────────────────────────────────────┬─┬───────────────────────┬──────────► └─ ,JOB= ─┬─ * ◄ ───────────────────┬─┘ └─ ,JOBNET= ─┬─ * ◄ ──┬─┘ ├─ jobname ───────────────┤ ├─ name ─┤ ├─ (job1,job2,...,job10) ─┤ └─ mask ─┘ └─ mask ──────────────────┘ ►─┬──────────────────────┬─┬─────────────────────┬─┬───────────────┬─────────► └─ ,LIST= ─┬─ ALL ◄ ─┬─┘ └─ ,LVL= ─┬─ 100 ◄ ─┬─┘ └─ ,MAINID=SYn ─┘ ├─ CPU ───┤ └─ nnn ───┘ ├─ GRPH ──┤ ├─ HDRS ──┤ ├─ #JOB ──┤ ├─ JOB ───┤ ├─ LAST ──┤ ├─ STN ───┤ ├─ TAPE ──┤ ├─ W ─────┤ ├─ WP ────┤ ├─ WPS ───┤ └─ WS ────┘ ►─┬──────────────────────────┬─┬───────────────────┬─────────────────────────► └─ ,NW= ─┬─ * ◄ ─────────┬─┘ └─ ,NWOPT= ─┬─ N ─┬─┘ ├─ networkname ─┤ └─ S ─┘ └─ mask ────────┘ ►►─┬──────────────┬─┬──────────────────────────┬──────────────────────────────► └─ ,RINT=hhmm ─┘ └─ ,SCHID= ─┬─ 0 or 1 ◄ ─┬─┘ └─ nnn ──────┘ ►─┬─────────────────────────────┬─┬──────────────────────┬───────────────────► └─ ,SEG=(segment,subsegment) ─┘ └─ ,SEQ= ─┬─ DLDT ◄ ─┬─┘ ├─ DODT ───┤ ├─ JOB ────┤ └─ STN ────┘ ►─┬─────────────────────┬─┬─────────────────────────────────────┬────────────► └─ ,SPAN= ─┬─ 8 ◄ ──┬─┘ └─ ,STN= ─┬─ * ◄ ───────────────────┬─┘ └─ hhmm ─┘ ├─ stationname ───────────┤ ├─ stationname* ──────────┤ └─ (sta1,sta2,...,sta10) ─┘ ►─┬──────────────────────────┬─┬─────────────────────┬───────────────────────► └─ ,SYS= ─┬─ * ◄ ────────┬─┘ └─ ,TO=(mmddyy,hhmm) ─┘ ├─ systemname ─┤ └─ mask ───────┘ ►─┬───────────────────────┬─┬────────────────────────┬───────────────────────►◄ └─ ,TRIG= ─┬─ J ◄ ────┬─┘ └─ TYPE= ─┬─ ACTUAL ◄ ─┬─┘ ├─ D ──────┤ └─ ALL ──────┘ ├─┬─ JD ─┬─┤ │ └─ DJ ─┘ │ └─ N ──────┘

Workload Balancing Commands


Workload Balancing Commands

Workload Balancing (WLB) analyzes jobs waiting for execution and sets priorities for submittal by preset criteria, which include due-out times, CPU usage, tape drive usage, user-assigned priorities, and external events.


/WLB

BARR, SET

LWLB

MOD, LIST

RESCHNG

JOB, TP1, TP2

XWLB

No keywords


►►─┬─────────────────────────────┬─┬────────────────┬─────────────────────────► └─ ,BARR=count/+count/-count ─┘ └─ ,JOB=jobname ─┘ ►─┬──────────────────────┬─┬────────────────┬─┬──────────────────────┬───────► └─ ,LIST= ─┬─ ALL ◄ ─┬─┘ └─ ,MOD=modname ─┘ └─ ,SET= ─┬─ CLASSx ─┬─┘ ├─ AVL ───┤ ├─ INITS ──┤ └─ USE ───┘ ├─ MINJOB ─┤ ├─ OFF ────┤ ├─ ON ─────┤ ├─ T1TAV ──┤ ├─ T1MAX ──┤ ├─ T2TAV ──┤ └─ T2MAX ──┘ ►─┬────────────┬─┬────────────┬──────────────────────────────────────────────►◄ └─ ,TP1=nnn ─┘ └─ ,TP2=nnn ─┘

Workload Planning Commands


Workload Planning Commands

Workload planning (WLP) simulates and reports on what could have happened in the data center as well as what should happen, given new processing objectives for the existing workload.

Note: For more information, see the Command Reference Guide and Report Reference Guide.

FWLP

DDNAME, DEMAND, DRCLASS, DRMODE, FROM, JOB, JOBNET, MAINID, RESA, RESP, SCHID, SPAN, SYS, TO, TRIG, TYPE


►►─┬─────────────────────────┬─┬───────────────────────┬──────────────────────► └─ ,DDNAME= ─┬─ NONE ◄ ─┬─┘ └─ ,DEMAND= ─┬─ 00 ◄ ─┬─┘ └─ ddname ─┘ └─ nn ───┘ ►─┬────────────────────────────────┬─┬──────────────────────┬────────────────► └─ ,DRCLASS=(class1,...,class8) ─┘ └─ ,DRMODE= ─┬─ YES ─┬─┘ └─ NO ──┘ ►─┬─────────────────────┬─┬─────────────────────────────────────┬────────────► └─ ,FROM=mmddyy,hhmm ─┘ └─ ,JOB= ─┬─ * ◄ ───────────────────┬─┘ ├─ jobname ───────────────┤ ├─ (job1,job2,...,job10) ─┤ └─ mask ──────────────────┘ ►─┬───────────────────────┬─┬────────────────────────┬───────────────────────► └─ ,JOBNET= ─┬─ * ◄ ──┬─┘ └─ ,MAINID= ─┬─ ALL ◄ ─┬─┘ ├─ name ─┤ ├─ SYn ───┤ └─ mask ─┘ └─ /SYn ──┘ ►─┬─────────────────────────┬─┬─────────────────────────┬────────────────────► └─ ,RESA= ─┬─ * ◄ ──────┬─┘ └─ ,RESP= ─┬─ * ◄ ──────┬─┘ └─ UCC7Rxxx ─┘ └─ UCC7Rxxx ─┘ ►─┬─────────────────────┬─┬─────────────────────┬────────────────────────────► └─ ,SCHID= ─┬─ 0 ◄ ─┬─┘ └─ ,SPAN= ─┬─ 8 ◄ ──┬─┘ └─ nnn ─┘ ├─ hh ───┤ └─ hhhh ─┘ ►─┬──────────────────────────┬─┬───────────────────┬─────────────────────────► └─ ,SYS= ─┬─ * ◄ ────────┬─┘ └─ ,TO=mmddyy,hhmm ─┘ ├─ systemname ─┤ └─ mask ───────┘ ►─┬────────────────────┬─┬─────────────────────────┬─────────────────────────►◄ └─ ,TRIG= ─┬─ J ◄ ─┬─┘ └─ ,TYPE= ─┬─ ACTUAL ◄ ─┬─┘ └─ N ───┘ └─ ALL ──────┘

Automated Performance Analysis Commands


Automated Performance Analysis Commands

Automated Performance Analysis (APA) is a reporting system that provides reports online or in batch for any time period specified, from the current time back through the previous two years.

Note: For more information, see the Command Reference Guide and Report Reference Guide.

GRAPHD/GRAPHJ/GRAPHN/GRAPHS

DIV1, DIV2, FROM, GLINE, ID, LIST, SCALE, TO


►►─┬─────────────────┬─┬─────────────────┬─┬────────────────┬─────────────────► └─ ,DIV1=nnnnnnn ─┘ └─ ,DIV2=nnnnnnn ─┘ └─ ,FROM=mmddyy ─┘ ►─┬──────────────────────┬─┬───────────────────────────────┬─────────────────► └─ ,GLINE= ─┬─ CALC ─┬─┘ └─ ,ID= ─┬─ nnnn ─────────────┬─┘ ├─ PRIM ─┤ │ ┌─ , ────┐ │ └─ SCND ─┘ └─ ( ─▼─ nnnn ─┴─ ) ─┘ ►─┬─────────────────────┬─┬──────────────────┬─┬──────────────┬──────────────►◄ └─ ,LIST= ─┬─ ALL ──┬─┘ └─ ,SCALE=nnnnnnn ─┘ └─ ,TO=mmddyy ─┘ ├─ DETL ─┤ └─ HELP ─┘

Utility Commands


Utility Commands

Use these commands to perform various utility functions, like cataloging data sets, allocating volumes, and displaying DASD information.


AL/ALC

DCB, DSN, SP, VOL

ALLOC

UNIT, VOL

BLDG

ENTRIES, FULL, INDX

CAT

CVOL, DSN, DVC, SEQ, UNIT, VOL

CONN

INDX, VOL

CTLG

DSN, DVC, ENTRY, SEQ, TYPE, VOL

DCONN

INDX

DEALLOC

VOL

DLTX

CVOL, INDX

DMPCAT

CVOL, DSN

DMPDSCB

DSN, VOL

DMPDSN

DSN, MEM, REC, VOL

FIND

DSN, VOL

LISTDIR

DSN, MEM, VOL

Utility Commands


LOC

DSN, VOLSER

MAP

DSN, LIST, VOL

RENAME

DSN, NEWNAME, VOL

SCRATCH/SCRATCHP

DSN, VOL

SPACE

VOL

UNC

CVOL, DSN

UT

No keywords


►►─┬─────────────────────────┬─┬──────────────────────────────┬───────────────► └─ ,CVOL= ─┬─ SYSRES ◄ ─┬─┘ └─ ,DCB=(recfm,lrecl,blksize) ─┘ ├─ xxxxxx ───┤ └─ xxxxxxxx ─┘ ►─┬──────────────────────┬─┬─────────────────┬─┬────────────────┬────────────► └─ ,DSN= ─┬─ * ──────┬─┘ └─ ,DVC=nnnnnnnn ─┘ └─ ,ENTRIES=nnn ─┘ └─ dsname ─┘ ►─┬────────────┬─┬─────────────────────────┬─────────────────────────────────► └─ ,ENTRY=n ─┘ └─ ,FULL= ─┬─ DELETE ◄ ─┬─┘ └─ EMPTY ────┘ ►─┬─────────────────────────┬─┬──────────────────────┬───────────────────────► └─ ,INDX= ─┬─ xxxxxxxx ─┬─┘ └─ ,LIST= ─┬─ DSN ◄ ─┬─┘ └─ xxx...x ──┘ └─ ALL ───┘ ►─┬─────────────────┬─┬───────────────────────┬─┬────────────────────┬───────► └─ ,MEM=xxxxxxxx ─┘ └─ ,NEWNAME=new-dsname ─┘ └─ ,REC= ─┬─ 1 ◄ ──┬─┘ └─ nnnn ─┘ ►─┬───────────────────┬─┬───────────────────────────────┬────────────────────► └─ ,SEQ= ─┬─ n ───┬─┘ └─ ,SP=(type,prim,sec,dirblks) ─┘ └─ nnn ─┘ ►─┬─────────────────────┬─┬──────────────────┬───────────────────────────────► └─ ,TYPE= ─┬─ ADD ──┬─┘ └─ ,UNIT=xxxxxxxx ─┘ ├─ CON ──┤ ├─ COPY ─┤ ├─ DEL ──┤ └─ REPL ─┘ ►─┬─────────────────────────────────────┬─┬──────────────────┬───────────────►◄ └─ ,VOL= ─┬─ ALL ───────────────────┬─┘ └─ ,VOLSER=xxxxxx ─┘ ├─ SYSRES ────────────────┤ ├─ xxxxxx ────────────────┤ ├─ (vol1,vol2,...,vol5) ──┤ └─ (vol1,vol2,...,vol10) ─┘

Utility Commands


Chapter 3: Scheduled Override Statements 49

Chapter 3: Scheduled Override Statements

Use these statements to override JCL and other statements that are included in the JCL for a job, thereby dynamically changing run stream contents to fit the needs of a particular run.


#ARF, SET=

Overrides the ARFSET designation on the job definition screen

#HLD

Hold job in request queue

#JCL

Set a JCL override requirement

#JEND

End of #Jx override statements

#JI, BD=, BT=, ED=, ET=, ID=, JOB=, CV=, OA=, OB=

Include statements at queue entry time

#JO, BD=, BT=, ED=, ET=, ID=, JOB=, CV=, OA=, OB=

Omit statements at queue entry time

#MNT

Set run to maintenance type

#MSG,xxx...x

Send message to master station

#NOX

Make run nonexecutable

#NTR

Turn off triggering for this run

#RES, TP1=, TP2=, CPUTM=, ELAPTM=, PRT=, CLASS=,

Change resources

#SSC,COND=

Define step-level condition code tests

Utility Commands


#VER

Set verification requirement on

#XEND

End of #Xx override statements

#XI, BD=, BT=, ED=, ET=, ID=, CV=, OA=, OB=

Include statements at submission time

#XO, BD=, BT=, ED=, ET=, ID=, CV=, OA=, OB=

Omit statements at submission time

#7UNI

Flags JCL as a cross-platform submission job


►►─┬──────────────────────┬─┬─────────────────────┬─┬────────────┬────────────► └─ ,BD= ─┬─ 00000 ◄ ─┬─┘ └─ ,BT= ─┬─ 0000 ◄ ─┬─┘ └─ ,CLASS=x ─┘ └─ yyddd ───┘ └─ hhmm ───┘ ►─┬───────────────────────────────────────┬─┬────────────────┬───────────────► └─ ,COND=nnnn,ro,procstepname.stepname ─┘ └─ ,CPUTM=mmmss ─┘ ►─┬───────────────────┬─┬──────────────────────┬─┬────────────────┬──────────► └─ ,CV= ─┬─ DO ◄ ─┬─┘ └─ ,ED= ─┬─ 99999 ◄ ─┬─┘ └─ ,ELAPTM=hhmm ─┘ ├─ CU ───┤ └─ yyddd ───┘ └─ DL ───┘ ►─┬─────────────────────┬─┬──────────────────────────────────────┬───────────► └─ ,ET= ─┬─ 2400 ◄ ─┬─┘ └─ ,ID= ─┬─ 000 ◄ ───────────────────┬─┘ └─ hhmm ───┘ ├─ nnn ─────────────────────┤ ├─ nnn-nnn ─────────────────┤ │ ┌─ , ───────────┐ │ └─ ( ─▼─ nnn,...,nnn ─┴─ ) ─┘ ►─┬────────────────┬─┬─────────────────────┬─┬─────────────────────┬─────────► └─ ,JOB=jobname ─┘ └─ ,OA= ─┬─ 0000 ◄ ─┬─┘ └─ ,OB= ─┬─ 2400 ◄ ─┬─┘ └─ hhmm ───┘ └─ hhmm ───┘ ►─┬────────────┬─┬─────────────────┬─┬────────────┬─┬────────────┬───────────►◄ └─ ,PRT=nnn ─┘ └─ ,SET=nnnnnnnn ─┘ └─ ,TP1=nnn ─┘ └─ ,TP2=nnn ─┘


Chapter 4: Panels


Automated Recovery Facility Panels (see page 51) Database Maintenance Panels (see page 51) Queue Maintenance Panels (see page 54) Virtual Resource Management Panels (see page 56) Utility Panels (see page 57)

Automated Recovery Facility Panels

Use the automated recovery facility panels to add, delete, or update sets of ARF condition definitions.


AR.3

ARF Condition Definition Maintenance

Database Maintenance Panels

Use the database maintenance panels to define jobs, networks, data sets, and predecessors; schedule jobs and networks; add documentation to the CA Workload Automation SE database; maintain JCL; and access and clear the CA Workload Automation SE text editor. To display the Database Maintenance Menu, enter DB on any CA Workload Automation SE panel.


DB

Database Maintenance Menu

DB.1

CPU Job Definition

DB.10

XPJOB Definition

DB.11

Agent Job Definition



DB.A

Cross-Platform Jobs Menu

DB.2

Scheduling Menu

DB.2.1

CPU Job Scheduling

DB.2.1-E

CPU Job Scheduling Parameter Edit

DB.2.2

Input Network Scheduling

DB.2.2-E

Input Network Scheduling Parameter Edit

DB.2.3

Output Network Scheduling

DB.2.3-E

Output Network Scheduling Parameter Edit

DB.2.4

Job Triggering

DB.2.5

Input Network Triggering

DB.2.6

Data Set Triggering

DB.2.7

Modification to Resolved Schedule Dates

DB.2.8

Base Calendar Maintenance

DB.3

Job Predecessor/Successor Menu

DB.3.1

Data Set Predecessors

DB.3.2

CPU Job Predecessors



DB.3.4

Input/Output Network Tasks

DB.3.6

User Memo-Form Predecessors

DB.3.7

Report IDs Created

DB.4

Workload Documentation Menu

DB.4.1

CPU Job Documentation

DB.4.2

Input/Output Network Documentation

DB.4.3

User-Defined Item Documentation

DB.4.4

Dataset Documentation

DB.4.5

DD Statement Documentation

DB.4.6

Application System Documentation

DB.5

Input/Output Network Definition

DB.6

Data Set Definition

DB.7

JCL Library Maintenance

XN.1

XPJOB Node Definition

XN.2

XPJOB User-ID/Password Definition

XN.3

Agent User-ID/Password Definition

Queue Maintenance Panels



Use the queue maintenance panels to display status, change JCL, and control jobs and networks that have been brought into the CA Workload Automation SE queues for processing. To display the Queue Maintenance Menu, enter QM on any CA Workload Automation SE panel.


QM

Queue Maintenance Menu

QM.1

Jobs Status Prompt

QM.1-X

Jobs Status

QM.1-XC

Reason for Cancel

QM.1-M

Jobs Status (RQMTS)

QM.2

Job Predecessors Prompt

QM.2-X

Job Predecessors

QM.3

Job Attributes Prompt

QM.3-X

Job Attributes

QM.4

Job in Restart Status Prompt

QM.4-X

Job in Restart Status

QM.5

Queued JCL

QM.6

Input Networks Prompt



QM.6-X

Input Networks (1-Up Display)

QM.6-S

Input Networks (2-Up Display)

QM.7

Output Networks Prompt

QM.7-X

Output Networks (1-Up Display)

QM.7-S

Output Networks (2-Up Display)

QM.8.1

List of Agent Job Executions

QM.8.2

Agent Job Display Information for Requested Function

Virtual Resource Management Panels


Virtual Resource Management Panels

Use the Virtual Resource Management (VRM) panels to define job resource dependencies, list jobs using VRM resources, display pending resources and add, update, or delete a resource type count resource. To display the Virtual Resource Management Menu, enter RM on any CA Workload Automation SE panel.


RM

Virtual Resource Management Menu

RM.1

Job Resource Management

RM.2

Job/Resource Cross Reference List

RM.3

Active Job Resources Display

RM.4

Pending Resources Job Display

RM.5

Jobs Waiting on Resources

RM.6

Corequisite Resources List

RM.7

Resource Count Resource Management

Utility Panels


Utility Panels

Use the utilities panels to perform various utility functions. These include cataloging data sets, allocating volumes, and displaying DASD information. To display the Utilities Menu, enter UT on any CA Workload Automation SE panel.


UT

Utilities Menu

UT.1

Allocate Dataset

UT.2

Catalog Dataset

UT.3

Rename Dataset

UT.4

Scratch Dataset

UT.5

Uncatalog Dataset

UT.6

Build GDG Index

UT.7

Delete Index

UT.8

Connect a Catalog

UT.9

Disconnect a Catalog

UT.10

Find DSN on DASD

UT.11

Allocate Volume

UT.12

Deallocate Volume

Utility Panels


UT.13

Display Format 1 DSCB

UT.14

Display Directory Info

UT.15

Display Dataset Attributes Map

UT.16

Display Available DASD Space

UT.17

Display Physical Data Records

UT.18

Display Catalog Block

UT.19

Display Catalog Entries


Chapter 5: Reports


History Reports (see page 59) Workload Planning Reports (see page 61) CA Earl and CA Easytrieve Reports (see page 61)

History Reports

CA Workload Automation SE creates log data set records that are used by the history reporting facility to create reports on system activity.

Note: For more information, see the Report Reference Guide.

01

Scheduled Jobs Not Run

02

Transaction Detail

03

Log Dump

04

Scheduled vs. Actual Job

05

Scheduled vs. Actual Station

06

Job Processing Activity

07

Workstation Activity

08

Master Station Activity (Browse data set)

09

Cross Platform Activity

10

Cross Platform Job Completion Profile

History Reports


11

Internal Cross Platform Submission Activity

12

Database Update Transaction Detail

13

Abnormal Job Termination

16

VRM Evaluation and Posting Activity

20

Submit Cycle Summary

21

Submit Job Detail

22

Job Non-Submission Analysis

23

Job Submission Activity

24

Job Submission Output Activity

30

Security Exceptions

50

Last Logged Status of Jobs

Generated Batch Terminal Interface Commands

Simulated LQ Display of Jobs

Recovery Aid Batch Commands

51

Request Queue Recovery Aid Commands

Generated BTI Commands

70

Internal Activity Trace

Workload Planning Reports


Workload Planning Reports

The workload planning facility generates reports that provide resource usage and job run information, based on simulated runs.


WLP01

Card Input Edit

WLP02

Hourly INIT Usage Projection

WLP03

Hourly TP1 Usage Projection

WLP04

Hourly TP2 Usage Projection

WLP05

Hourly CPU Usage Projection

WLP06

Resource Summary Projection

WLP07

Job Summary - Projection

Job Summary - Actual

Detailed Resource Utilization - Projection

Detailed Resource Utilization - Actual

CA Earl and CA Easytrieve Reports

The interfaces with CA Earl and CA Easytrieve provide several predefined reports. The reports are produced by defining the data you want and the date/time range for the report and selecting the appropriate predefined CA Earl or CA Easytrieve definition. These definitions are selected by using a "request ID." A batch job then produces the requested reports.




Reports Available from Log History Data

The following reports are available from log history data.

Note: xx is ER for CA Earl and EZ for CA Easytrieve.

Job Completion Profile (CA7xx001)

Log type = 161

Request Queue Activity Profile (CA7xx002)

Log type = 161

Ready Queue Activity Profile (CA7xx003)

Log type = 161

Active Queue Activity Profile (CA7xx004)

Log type = 161

Preprocessing Queue Activity Profile (CA7xx005)

Log type = 161

Postprocessing Queue Activity Profile (CA7xx006)

Log type = 161

Prior-Run Queue Activity Profile (CA7xx007)

Log type = 161

Database DSD/DSM Record Activity Profile (CA7xx008)

Log type = 161

Database JBD/JBM Record Activity Profile (CA7xx009)

Log type = 161

Database NWD/NWM Record Activity Profile (CA7xx010)

Log type = 161

Database PPD/PPM Record Activity Profile (CA7xx011)

Log type = 161

Database SID/SIM Record Activity Profile (CA7xx012)

Log type = 161

Database SJD/SJM Record Activity Profile (CA7xx013)

Log type = 161

Database SOD/SOM Record Activity Profile (CA7xx014)

Log type = 161



Database Type I Record Activity Profile (CA7xx015)

Log type = 161

Composite Database Activity Profile (CA7xx016)

Log type = 161

Composite Queue Activity Profile (CA7xx017)

Log type = 161

Queue Posting Activity (CA7xx018)

Log type = 117

Job Scheduling/Completion Activity (CA7xx019)

Log type = 161

Tape Data Set Activity (CA7xx020)

Log type = 161

DASD Data Set Activity (CA7xx021)

Log type = 161

Workstation Network Scheduling Activity (CA7xx022)

Log type = 161

Input Network Performance Profile (CA7xx023)

Log type = 161

Output Network Performance Profile (CA7xx024)

Log type = 161

Communications Data Set Activity (CA7xx025)

Log type = 161

Schedule Scan Activity (CA7xx026)

Log type = 161

Queue Allocation Usage Profile (CA7xx027)

Log type = 162

Job Termination Posting Dwell Time (CA7xx028)

Log type = 005

Job Completion Dwell Time (CA7xx029)

Log type = 105

Queue Entry Dwell Time (CA7xx030)

Log type = 105



Transaction Response Time Profile (CA7xx031)

Log type = 161

/LOG Command Detail (CA7xx032)

Log type = 129

Trailer Queue Activity Profile (CA7xx033)

Log type = 161

In-Storage Trailer Queue Profile (CA7xx034)

Log type = 162

Performance Statistics Information Job Report (CA7xx035)

Log type = 161

Performance Statistics Information System Report (CA7xx036)

Log type = 161

Job Completion Table Data (CA7xx037)

Log type = 162

JCL Data Set Access Time (CA7xx038)

Log type = 164



Reports Available From Database Backup

The following reports are available from database backup.

Note: xx is ER for CA Earl and EZ for CA Easytrieve.

Data Sets with No Associated Jobs

CA7xx701

Workstation Networks with No Associated Jobs

CA7xx702

Roster for Prose Type: System

CA7xx703

Roster for Prose Type: Job

CA7xx704

Roster for Prose Type: Data Set

CA7xx705

Roster for Prose Type: Network

CA7xx706

Roster for Prose Type: User

CA7xx707

Roster for Prose Type: DD

CA7xx708

CPU Job Schedules with Current SCHDMOD

CA7xx709

Input Network Schedules with Current SCHDMOD

CA7xx710

Jobname ARFSET Cross-Reference

CA7xx711

ca workload automation se workload... · · 2015-12-17if you have comments or questions about ca...

Documents