cad designed max oah = 92” max oal = 252”

25

Upload: cicada

Post on 02-Feb-2016

22 views

Category:

Documents


0 download

DESCRIPTION

CAD designed MAX OAH = 92” MAX OAL = 252”. FORD F550 CHASSIS. 17,500 GVW 2 and 4 door versions 7.3 Power stroke Diesel Automatic transmission. BED & BODY. Aluminum 6061 T-6 Alloy 112” body length HD under body support grid 2”× 4” Box tubing sub- structure (.250 wall) - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: CAD designed MAX OAH = 92” MAX OAL = 252”
Page 2: CAD designed MAX OAH = 92” MAX OAL = 252”

• CAD designed• MAX OAH = 92”• MAX OAL = 252”

• 17,500 GVW

• 2 and 4 door versions

• 7.3 Power stroke Diesel

• Automatic transmission

FORD F550 CHASSIS

Page 3: CAD designed MAX OAH = 92” MAX OAL = 252”

• Aluminum 6061 T-6 Alloy

• 112” body length

• HD under body support

grid

• 2”× 4” Box tubing sub-

structure (.250 wall)

• 6”× 4” angle perimeter

with tapered fronts

• 2 widths available

(dually or super single)

BED & BODY

Page 4: CAD designed MAX OAH = 92” MAX OAL = 252”

CAGE

• .200 × 1.900 5086 tubing• 5 part break-a-part design• Jig built for ease of replacement• Allows top removal of tank

• 5/16” 5052 aluminum plate

• Custom diamond stamped design

Protective Mesh plating

Page 5: CAD designed MAX OAH = 92” MAX OAL = 252”

• Poly material• Life time warranty• 400 gallons standard• 44” wide × 64” long ×

38” height• Fill tower• #70 durometer rubber

isolation plate• 3 × 3 ¼ aluminum angle

welded onto deck

WATER TANK

Page 6: CAD designed MAX OAH = 92” MAX OAL = 252”

PUMP

• Waterous E-501-A standard

• 26.5 HP diesel

• 350 PSI @ 40 GPM

• 150 PSI @ 100 GPM

• Separate 40 amp alternator

• 2” main inlet

• 1.5” main outlet

• 2.5” inlet valve

• Other Waterous or Hale pumps available

Page 7: CAD designed MAX OAH = 92” MAX OAL = 252”

• 2” tank to pump with ¼ turn valve

• Stainless steel discharge manifold (304-L)

• Straight shot lockable linkage

• Elkhart controls

• 2.5” inlet valve

PLUMBING

Page 8: CAD designed MAX OAH = 92” MAX OAL = 252”

• (2) Hannay #SBEF32-23-24

• Each with 200’ of ¾” booster

• (4) 100’ lengths hose

• Hose coupled bar way NST

• Protection reels

• 50” of ¾” booster

• 3 locations: upper, lower, or under bed (AS SHOWN)

Standard

Optional

BOOSTER REELS

Page 9: CAD designed MAX OAH = 92” MAX OAL = 252”

HOSE TRAY

• (1) 200’ bed of 1.75 pre connect

• Left or right rear side of bed

Page 10: CAD designed MAX OAH = 92” MAX OAL = 252”

• 40” long × 18” deep × 36” high

• Aluminum construction

• ¾” OAK tool mounting wall

• Compartment lights

• (1) adjustable shelf

• Magnetic door switches (for cab door open light)

• Roll-up door (brushed aluminum)

COMPARTMENTS

Page 11: CAD designed MAX OAH = 92” MAX OAL = 252”

• Plus 20 degree departure angle

• Steel substructure

• 4-way NFPA slip resistant cover

• Lighted recessed license plate

• Step lights

• Winch power (optional)

• Seven pin connector (optional)

• Protected FMVSS lighting modules

REAR STEP BUMPER

Page 12: CAD designed MAX OAH = 92” MAX OAL = 252”

WINCH• WARN XI 8000

• Storage options

• 2 – 12 volt plugs

• 2 – 12 volt night lights• 95’ of 5/16 cable• Remote control coil cord

Page 13: CAD designed MAX OAH = 92” MAX OAL = 252”

• Weather proof aluminum construction

• 3003 smooth aluminum powder coated

• Separate service door

• Chassis key energized system

• Key becomes master switch

WIRING CENTER

Page 14: CAD designed MAX OAH = 92” MAX OAL = 252”

• Whelen “B” link multiplex system

• Light protected by Brush guard

• Grille lights

• Bumper lights

• Winch lights

• Rear warning (LED)

• FMVSS rear lower

• Scene lights (3) 12 volt

LIGHTING

Page 15: CAD designed MAX OAH = 92” MAX OAL = 252”

• .125 Aluminum powder coating

• Lettered control bezels

• Pump control and gauges

• “T” handle control handles (locking)

• Water level gauge

• Optional foam level gauge

PUMP PANEL

Page 16: CAD designed MAX OAH = 92” MAX OAL = 252”

• 110 volt Kussmaul auto eject

• 110 volt Kussmaul on board charger

SHORELINE

Page 17: CAD designed MAX OAH = 92” MAX OAL = 252”

• Below the oil pan

• Under front axle hub

• Auto trans

• Fuel tank

• All painted (X-O rust) black

UNDERBODY SKID PLATES

Page 18: CAD designed MAX OAH = 92” MAX OAL = 252”

• Foam pro 1600

• Controls on pump panel

• Class A foam .1 to 1%

• 15 gallon foam cell

FOAM SYSTEM

Optional

• CAFS• Dual agent system

Page 19: CAD designed MAX OAH = 92” MAX OAL = 252”

• Plus 20 degree approach angle

• Alluminum or steel construction

• 12” channel

• 4” × 4” × ¼” tube substructure

• Recessed class 3 hitch and pull points

FRONT BUMPER

Page 20: CAD designed MAX OAH = 92” MAX OAL = 252”

• 2.00 × 1.900 5086 tubing

• Nerf bar / running boards

• Lightbar guard

BRUSH GUARD(S)

Page 21: CAD designed MAX OAH = 92” MAX OAL = 252”

• Custom offset 19.5” wheels

• ½” solid centers

• SAE 267 certified (cornering and radial)

• Wheels painted as standard (match body)

• Optional jet coat wheels

• Michelin load range H

• 285 70R / 19.5 D2 tires

• 6100 lb rating per tire

• 105 PSI inflation pressure

• Mud and snow tread

WHEELS AND TIRES

Wheels

Tires

Page 22: CAD designed MAX OAH = 92” MAX OAL = 252”

• All aluminum construction

• Powder coated

• Diagnostic cabinet

• Custom designs available

CUSTOM CONSOLES

Page 23: CAD designed MAX OAH = 92” MAX OAL = 252”

• Standard equipped with 4” NFPA stripe

• Optional based on fire district needs

• Gold leaf

• Scotchlite

• Custom logos

GRAPHICS

Page 24: CAD designed MAX OAH = 92” MAX OAL = 252”

• Bumper turrets (remote joy stick control)

• Tank top storage (up to 8’ available)• Bumper spray nozzles• Air systems: breathing, tool, tire fill• Seven pin connectors• 120 volt lighting

OTHER OPTIONS

Page 25: CAD designed MAX OAH = 92” MAX OAL = 252”

• Water cooler with mounts

• Tool storage

• Generators

• Additional compartments

• Mud flaps

OTHER OPTIONS