Slide 1

Slide 2

CADLink CAD Interface system that connects your design information to. PLEX Online. ECN Manager Ties your ERP Solution CAD information with your Engineering change process.

Slide 3

QBuild began in 1995 with a simple AutoCAD ERP link. Today CADLink integrates ERPs to leading CAD & PDM systems, including: SolidWorks SolidWorks EPDM EPDM WindChill WindChill AutoCAD AutoCAD NX NX Inventor Inventor Pro-E Pro-E Many more.. Many more..

Slide 4

L INKING P LEX AND CAD D ATA

Slide 5

Slide 6

o Zero software cost o Error Prone o Time Consuming o Small engineering departments o Manufacturing of simple, repetitive products

Slide 7

o Cheap and Cheerful o Slightly Faster than Brute Force o Often requires massaging data in both CAD and PLEX o Small engineering departments o Manufacturing of simple, repetitive products

Slide 8

Features o Direct link to: PLEX Online o Push PLEX description onto the drawing o Push revision information to CAD and PLEX Online o Update items, bills of material, and operations directly from your CAD system o Tie critical dimensions to PLEX ERP BOM quantities

Slide 9

Reduce non value-added engineering activities Double and triple data entries are eliminated Reduce scrap Improve purchasing accuracy Eliminate wrong build situations Improve on time shipments Reduce engineering costs Improve accuracy from engineering to production

Slide 10

8 Eng x 1 hour per day = 2000 hours BOM Data Entry 1 scrapped part per year 12 late shipments per year Shop Floor ConfusionTotal savings of 65,000 a year

Slide 11

Slide 12

Bill Of Material information is pulled from Models or Drawings and displayed for the Engineer in this grid. Discrepancy between CAD and PLEX Data are highlighted

Slide 13

Multi Level Bill Of Material

Slide 14

Shows the discrepancy between CAD and PLEX Data. Allows engineering to select the correct one

Slide 15

Class Code table is taken directly from PLEX Online

Slide 16

Group Code table is taken directly from PLEX Online

Slide 17

PLEX Raw Material data is accessible directly from CADLink

Slide 18

PLEX Routing data created directly from within CADLink

Slide 19

Engineering can select the specific operation for each assembly component

Slide 20

Bill of Material Changes Summary shows only the BOM changes that will be made to PLEX

Slide 21

CAD Properties for the entire assembly conveniently summarized in a single tab

Slide 22

CADLink can be configured to suit your requirements

Slide 23

BOM Data Entry 8 Eng X 1 hour per day = 2000 hours Cost Justification Shop Floor Confusion 1 scrapped part per year 12 late shipments per year Total Savings of $65,000 per year

Slide 24

Contact for Sales and Consulting: Geovanna Pazmino Applications Engineer QBuild C O R P O R A T I O N 145 Renfrew Drive, Unit 140 | Markham, ON L3R 9R6 | CANADA Phone +1 905 479 7811 EXT 224 Fax +1 905 479 2636 Email: geovanna.pazmino@qbuildsoftware.comgeovanna.pazmino@qbuildsoftware.comwww.qbuildsoftware.com