calibration and communicator solutions for your plant! · pv 621-is intrinsically safe pneumatic...

16
Featuring Products from Calibration and Communicator Solutions for your Plant! Leading Supplier to Process, Pharmaceutical and Plant Maintenance See Inside: State of the Art Products Kits & Special Offers Application Note 800-828-1470 Transcat.com Buy now at 2011 prices!

Upload: others

Post on 03-Jun-2020

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

Featuring Products from

Calibration and Communicator Solutions for your Plant!

Leading Supplier to Process, Pharmaceutical and Plant Maintenance

See Inside: ✔ State of the Art Products✔Kits & Special Offers✔ Application Note

800-828-1470 • Transcat.com

Buy now at 2011 prices!

Page 2: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

2 Better by Your every measure.

Presents:

+ =HART

CommunicatorDocumenting

Calibrator

Now, one instrument

can help you do it all!

Inside!Limited Time Offers Pages: 6Application Note Page: 11Additional Products Pages: 14

for Configuring HART® Devices &

Page 3: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

3800-828-1470 • Transcat.com

NEW Diagnostic Solutions

Now, one instrument

can help you do it all!

The DPI620-IS is an Intrinsically Safe Communicator and Calibrator?

✔ The Intrinsically Safe versions reduce response time to break downs and emergencies by removing the need for ‘Hot Permits’ and gas detection equipment. This gives peace of mind to all those responsible for safety within hazardous areas.

✔ The DPI620-IS is UL and CSA approved test, calibration and HART configuration system designed for use in hazardous zones where explosive atmospheres are likely to occur.

“With the IS version, the DPI620 IS is now on equal footing with the other HART communicators I have considered for our company. We no longer have to worry about using a non-IS instrument in

an IS area. And we have one of the only IS documenting, multifunction calibrators as a bonus.” - Gas Transmission Company

Calibrating Instruments in Your Plant

Page 4: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

4 Better by Your every measure.

Presents:

• Intrinsically Safe Design – DPI620 IS, can be used virtually anywhere in your Plant• Full HART capability – all Registered HART DD’s are stored within the instrument ✓ Powerful device configuration, commissioning and maintenance capabilities• FREE Upgrades – download new HART Device Drivers at no additional charge ✓ No special software required• 24 Volt Loop Power Supply• Built-in 250Ω HART Resistor – no need to order separately and it can’t be lost• USB connection to PC and Peripheral Devices• Light Weight Design for ergonomic Field Use• Long Life NiMH Battery Pack• Weather-Proof to IP65

And of course the full capabilities of a documenting multi-function calibrator at no additional charge!

The DPI620 Platform introduces a HART ®

Communicator that can be used as your Universal choice for setting up transmitters and other field devices in your plant. Additionally you have all the capabilities of a documenting multi-function calibrator at your disposal as well. When your process requires fast and accurate configuration of HART devices, the DPI 620 and DPI620IS are the right choice.

It also represents the economical choice, costing less than a separate calibrator and communicator. Light weight, capable, accurate and cost effective. Make room in your budget for this instrument.

Order # Description PriceDPI620-IS Intrinsically Safe Advanced

Modular Calibrator with HART Communicator and 1Gb memory

$ 6,217

DPI620-IS-CE Intrinsically Safe Advanced Modular Calibrator with HART Communicator, Windows CE and 1Gb memory

$ 7,038

DPI620 DPI620 Multifunction Calibrator + HART® $ 4,595

DPI620CE DPI620 Multifunction Calibrator w/Windows CE + HART®

$ 5,202

IO620-USB-PC Cable for Connecting DPI620 to a PC $ 13

Transcat Accredited Calibration CallTranscat Accredited Calibration for Pressure Modules Call

DPI620IS

HART® Communicator

Page 5: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

5Call: 800-828-1470 • Transcat.comCall: 800-828-1470 • Transcat.com 55Call: 800-828-1470 • Transcat.comCall: 800-828-1470 • Transcat.com 5

• A Test Meter, Calibrator, HART® Communicator and PDA for use in Explosive Atmospheres• Re-Range in use, Adapt by Application, Upgrade and Expand over Time• Reduce Equipment Inventory, Cost of Ownership and Simplify Training• Increase Productivity and Regulatory Compliance• Measure, Source, Simulate Multiple Parameters; Accuracy from 0.0025% rdg, 0.0029% FS• Display up to 6 Active Readings (Video Quality Color Touch Screen) • Long-Life NiMH Battery Pack• Works With High Accuracy Add-On Pressure Modules, Pressure Generating Bases• Measure, Source and Simulate mA, mV, V, Ohms, Frequency, RTDs and Thermocouples

Druck DPI620IS Series from GEIntrinsically Safe Multifunction Documenting Calibrator & HART® Communicator

Intrinsically safe, high accuracy documenting calibrator is very portable for field use and makes very accurate measurements.

ISISIntrinsically Saf

e

NEW

Order # Description PriceDPI620-IS Intrinsically Safe Advanced Modular Calibrator with HART Communicator and 1Gb memory $ 6,217DPI620-IS-CE Intrinsically Safe Advanced Modular Calibrator with HART Communicator, Windows CE and

1Gb memory $ 7,038

PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795PV 622-IS Intrinsically Safe Pneumatic Pressure Station 1500 PSI $ 2,640PV 623-IS Intrinsically Safe Hydraulic Pressure Station 15000 PSI $ 3,167MC620-IS Intrinsically Safe Pressure Module Carrier (Holds (2) Modules) $ 558IO620IS-BATTERY Intrinsically Safe DPI 620-IS Rechargeable Battery $ 539IPM 620-IS-008G (+/-10 inH2O) Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-01G +/-1 Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-02G +/-3 Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-03G +/-5 Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-04G +/-10 Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-05G -14.5 to 15 Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-07G -14.5 to 30 Gauge Intrinsically Safe Pressure Module $ 1,573IPM 620-IS-08G -14.5 to 50 Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-10G -14.5 to 100 Gauge Intrinsically Safe Pressure Module $ 1,573IPM 620-IS-11G -14.5 to 150 Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-13G -14.5 to 300 Gauge Intrinsically Safe Pressure Module $ 1,573IPM 620-IS-14G 500 Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-16G 1000 Gauge Intrinsically Safe Pressure Module $ 1,848IPM 620-IS-165G 1500 Gauge Intrinsically Safe Pressure Module $ 1,848Transcat Accredited Calibration for DPI620IS CallTranscat Accredited Calibration for Pressure Modules Call

More Specs online at:

transcat.com/druck620

Transcat.com

More Ranges @

Page 6: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

6 Better by Your every measure.Better by Your every measure.6 Better by Your every measure.6* Other Pressure Ranges Available **Pressure generation station sold separately

Order # Description Value PriceDPI620-IS-KIT1 DPI620-IS with HART Communicator and 1Gb memory with Kit 1 $ 7,612 $ 6,967DPI620-IS-CE-KIT1 DPI620-IS with HART Communicator, Windows CE and 1Gb memory with Kit 1 $ 8,433 $ 7,788

SAVE$645

Kit 1 - IS Low Pressure Accessory Package:

✔ Low Pressure Hoses and Fittings✔ Adaptor for DPI104 & PV62X Base** ✔ Waterproof Case

✔ DPI 104-IS Low Pressure Test Gauge (10 PSI)* ✔Ugly’s Electrical Safety Hand Book ✔Dirt Trap

✔ Low Pressure Hoses and Fittings ✔ Adaptor for DPI104 & PV62X Base** ✔ Waterproof Case

✔ DPI 104-IS Pneumatic Pressure Test Gauge (300 PSI)* ✔Ugly’s Electrical Safety Hand Book✔Dirt Trap

Kit 2 - IS Pneumatic Accessory Package:

Order # Description Value PriceDPI620-IS-KIT2 DPI620-IS with HART Communicator and 1Gb memory with Kit 2 $ 7,612 $ 6,967DPI620-IS-CE-KIT2 DPI620-IS with HART Communicator, Windows CE and 1Gb memory with Kit 2 $ 8,433 $ 7,788

SAVE$645

✔ Hydraulic Hoses and Fittings ✔ Adaptor for DPI104 & PV62X Base**

✔ Waterproof Case ✔ DPI 104-IS High Pressure Test Gauge (3000 PSI)* ✔Ugly’s Electrical Safety Hand Book

Order # Description Value PriceDPI620-IS-KIT3 DPI620-IS w/ HART Communicator and 1Gb memory with Kit 3 $ 7,424 $ 6,842DPI620-IS-CE-KIT3 DPI620-IS w/ HART Communicator, Windows CE and 1Gb memory with Kit 3 $ 8,245 $ 7,663

Kit 3 - IS Hydraulic Accessory Package:

SAVE$582

GREAT Accessory KITS...with your purchase of a DPI620 IS Calibrator:

Page 7: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

7Call: 800-828-1470 • Transcat.comCall: 800-828-1470 • Transcat.com 7

• You Might Need an IS Approved Case for Your IS Instrument• You Need ALL the Pieces to Be IS: Pressure Modules, Bases and Even the Hoses!• The PV622 IS Pressure Station is the Best Way to Generate 1,500 PSI in the Field• The Dual Stage Pump Gets You to Your Desired Pressure Fast and Accurately

Druck DPI620IS Series Accessories from GEIntrinsically Safe Accessories for your DPI620IS system

Intrinsically Safe (IS), approved accessories complete your IS solution set. Keep in mind that you need an IS rating for everything you take into this area of your plant.

Buy and Calibrate with Confidence!Get a Transcat Accredited Calibration and know your instrument

has documented accuracy from the day it arrives.800.828.1470 | Transcat.com

NEW

Order # Description PricePV 621-IS Intrinsically Safe Pneumatic Pressure Station 20 bar/300 psi $ 1,795PV 622-IS Intrinsically Safe Pneumatic Pressure Station 100 bar/1500 psi $ 2,640PV 623-IS Intrinsically Safe Pneumatic Pressure Station 1000 bar/15000 psi $ 3,167MC620-IS Intrinsically Safe Pressure Module Carrier $ 558IO620IS-BATTERY DPI 620-IS Rechargeable Battery $ 539IO620IS-CHARGER DPI 620-IS Battery Charger $ 240IO620IS-CRADLE DPI 620-IS Battery Charging Station $ 66IO620-CASE-1-IS Intrinsically Safe DPI 620-IS Carrying Case $ 124IO620-CASE-2-IS Intrinsically Safe DPI 620-IS System Carrying Case $ 205IO620-CASE-3-IS Intrinsically Safe PV62X-IS Pressure Station Carry Case $ 143I0620-HOSE-P1-IS Intrinsically Safe 1m micro bore hose $ 453I0620-HOSE-P2-IS Intrinsically Safe 2m micro bore hose $ 491I0620-HOSE-H1-IS Intrinsically Safe 1m micro bore hose $ 614I0620-HOSE-H2-IS Intrinsically Safe 2m micro bore hose $ 699Transcat Accredited Calibration for Pressure Modules Call

For more info go to: transcat.com/druck620

See page 5 for is pressure modules

Page 8: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

8 Better by Your every measure.

Presents:The DPI620 System...

Pressure Module Carrier

Pressure Stations(3 versions) with the DPI620

DPI620✔ Multifunction Documenting Calibrator

✔ Complete HART® Communicator

High Accuracy Pressure Modules

Page 9: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

9800-828-1470 • Transcat.com

NEW Diagnostic SolutionsRevolutionizes the Industry!

Key Feature

One instrument to configure and calibrate transmitters, temperature sensors, pressure transducers, pressure gauges and much more.

HART® Communicator• A HART® communicator with full library of registered device descriptions• Upgrades are internet accessible and FREE of charge• 24 VDC power supply - now you can power up field devices on your bench or in the field without additional instruments• Built-in 250Ω resistor - a nice convenience

Documenting, Multifunction Calibrator Accuracy from 0.0029% F.S. Windows® CE version: Adds PDA or handheld PC capabilities

✔ WIFI optional (Not IS version)– first time in a calibrator of this type; wireless access for internet and email and transfer of data and files

IS (Intrinsically Safe) Versions now available USB Connectivity – transfer files to PC

• Great Process Calibrator: measure, source and simulate mA, mV, T/C, RTD, frequency and measure 300 VAC and more• Pressure Module Carrier snaps into place, no hoses or cables required• Pneumatic and Hydraulic Pressure Stations for field or lab use• Compatible with Intecal , GE’s new 4Sight calibration and maintenance software, and 3rd party software packages • Video-quality touch screen, display up to six active readings simultaneously

Pressure Generation and Measurement • Plug-and-play pressure modules, ranges from 10”H2O to 15,000 PSI• All inclusive accuracy to 0.025%• Three pressure generation stations available , 95% vacuum to 300 or 1500 PSI pneumatically and 0 to 15,000 Hydraulic

Page 10: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

10 Better by Your every measure.

Presents:

10 Better by Your every measure.

Presents:

The DPI620 replaces the following Druck products:

TRXII and MCXII

DPI605

And...The DPI620 is an enhanced alternative to the popular: DPI 610/615• All inclusive accuracy to 0.025% F.S.• Plug and play pressure modules• Touch screen• Light-weight, detachable process calibrator for use in the field without pressure accessories• Full-function HART® communicator• Windows CE version• Ergonomic Design

Did You Know?

TRXII

DPI605

“With the new pressure bases in the DPI620 family, I still have the ability to generate pressure in the field when I need it. I can take the DPI620 off the base and calibrate my temperature and process devices without lugging the pressure piece around with me. “

-field technician

MCXII

DPI610/615

Page 11: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

11800-828-1470 • Transcat.com

NEW Diagnostic Solutions

A natural gas transmission company transports and delivers natural gas. The DPI620 is the ideal field calibrator for their needs.

Applications: The customer uses the DPI620 at natural gas metering and/or regulating (“cut”) stations for calibration, installation and troubleshooting of the following devices: •I/Ptransducers(remotevalvecontrol) •Frequencygenerationforultrasonicflowmeters •Staticpressuremeasurement •300PSImodule–forlowpressurecutstations,usually250PSI •1500PSImodule–forhighpressurecutstations, usually600–1000PSIforlargeusers,i.e:powerplants •Temperature–3wireRTDsource/measure •MultivariabletransmittersimulationforΔP, P & T •HARTcommunicationwithprocesstransmitters •Electrical–sourcemA&Vsignals

Why the DPI620 system?: • Compact Size – Field techs work out of their trucks on a daily basis, “space is a premium” • Modularity – expandable ranges and multiple configurations • Pressure module design – “problems w/cords breaking due to fatigue on competitive pressure modules” • Built-in data logging – “easier to set up” • 1500 PSI pneumatic pressure generation without gas bottle - the best in the industry • Conventional HART® communicators had internal “availability issues” and “battery problems” with competitive HART® communicators

Solution: DPI620 CE, PV622 pressure generating station, MC620 module carrier, pressure module 300 PSI, pressure module 1500 PSI, external charger, spare batteries, NPT adapter kits, hose kits, cases

For more info go to:

transcat.com/druck620

Application Notes

11Call: 800-828-1470 • Transcat.com

NEW Diagnostic Solutions

Page 12: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

12 Better by Your every measure.Better by Your every measure.1212 Better by Your every measure.Better by Your every measure.12

• Full Capabilities of a Stand Alone Communicator• Free Upgrades Via the Internet: Upgrade your DD Library No Special Software Required, No Additional Cost• Powerful Device Configuration, Commissioning and Maintenance Capabilities• Complete Library of all Registered HART Device Descriptions• 24 Volt Loop Power Supply • 12 Hour Life Lithium Polymer Battery Pack• Measure, Source and Simulate Multiple Parameters• Can Display up to 6 Active Readings• USB Master and Slave for Connecting to a PC and Peripherals• Measure, Source and Simulate mA, mV, V, Ohms, Frequency, RTDs and Thermocouples

Order # Description PriceDPI620 DPI620 Multifunction Calibrator + HART® $ 4,595DPI620CE DPI620 Multifunction Calibrator w/Windows CE + HART® $ 5,202PV621 300 PSI Pneumatic Station $ 1,474PV622 1,500 PSI Pneumatic Station $ 2,168PV623 15,000 PSI Hydraulic Station $ 2,601MC620 Pressure Module Carrier $ 434PM620-07G Pressure Module for DPI620 -14.5 to 30 PSI $ 1,292PM620-10G Pressure Module for DPI620 -14.5 to 100 PSI $ 1,292PM620-18G Pressure Module for DPI620 3,000 PSI $ 1,517PM620-23A Pressure Module for DPI620 Absolute 15,000 PSI $ 2,037IO620-PRV-P-1 PV 621 and PV 622 Pneumatic Pressure Relief Valve 6 to 15 PSI $ 200IO620-PRV-P-2 PV 621 and PV 622 Pneumatic Pressure Relief Valve 45 to 100 PSI $ 200IO620-PRV-P-3 PV 621 and PV 622 Pneumatic Pressure Relief Valve 220 to 435 PSI $ 200IO620-104-ADPT DPI 104 Adapter Kit for PV62X Pressure Stations $ 152IO620-BATTERY Lithium Polymer Rechargeable Battery $ 194IO620-MAINS 100-240V AC 50/60 Hz Adapter for use with DPI 620 and Io620-Charger $ 6225171CL Intecal Software $ 971IO620-CASE-4 Modular System Transit Case $ 737IO620-CASE-2 System Carrying Case $ 91IO620-AC AC Voltage Measurement Probe $ 99Transcat Accredited Calibration for DPI620 CallTranscat Accredited Calibration for Pressure Modules Call“Tee” Fitting Permitting User to Mount (2) Gauges on the Pressure Base. (IO620-COMP)

Druck DPI620 Series from GEMultifunction Documenting Calibrator & HART® Communicator

High accuracy documenting calibrator is very portable for field use and makes very accurate measurements.

Pressure Modules

Pressure Module Carrier

The Most Complete Field Calibrator and HART® Communicator

For more info go to:

transcat.com/druck620

Transcat.com

More Modules @

Page 13: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

13Call: 800-828-1470 • Transcat.comCall: 800-828-1470 • Transcat.com 13

• Bench Top Use as Gauge Comparators• Advanced Pressure Generation • 95% Vacuum to 300 PSI Pneumatic • 95% Vacuum to 1,500 PSI Pneumatic • 0 to 15,000 PSI Hydraulic• Standalone Replacements for Hand Pumps• Can be Combined with the DPI620 to Create a Complete Documenting Calibrator• Accepts PM620 Pressure Modules to Create a Pressure Calibrator

Druck PV621, 622, 623 from GE Gauge Comparator Pressure Stations

A uniquely capable, re-rangeable and self contained pressure test system.

For more info go to:

transcat.com/druck620

PV 621300 PSI, Pneumatic

PV 62315,000 PSI, Hydraulic

PV 6221,500 PSI, Pneumatic

PM620 PressureModule

Order # Description PricePV621 300 PSI Pneumatic Station $ 1,474PV622 1,500 PSI Pneumatic Station $ 2,168PV623 15,000 PSI Hydraulic Station $ 2,601IO620-PRV-P-1 PV 621 And PV 622 Pneumatic Pressure Relief Valve 6 to 15 PSI $ 200IO620-PRV-P-2 PV 621 And PV 622 Pneumatic Pressure Relief Valve 45 to 100 PSI $ 200IO620-PRV-P-3 PV 621 And PV 622 Pneumatic Pressure Relief Valve 220 to 435 PSI $ 200IO620-PRV-P-4 PV 622 Pneumatic Pressure Relief Valve 435 to 870 PSI $ 200IO620-PRV-P-5 PV 622 Pneumatic Pressure Relief Valve 725 to 1,500 PSI $ 200IO620-PRV-P-6 PV 621 And PV 622 Pneumatic Presure Relief Valve 16 to 45 PSI $ 200IO620-PRV-P-7 PV 621 And PV 622 Pneumatic Pressure Relief Valve 90 to 170 PSI $ 200IO620-PRV-P-8 PV 621 And PV 622 Pneumatic Pressure Relief Valve 175 to 260 PSI $ 200IO620-PRV-H-1 PV 623 Hydraulic Pressure Relief Valve 145 to 725 PSI $ 200IO620-PRV-H-2 PV 623 Hydraulic Pressure Relief Valve 725 to 2,900 PSI $ 200IO620-PRV-H-3 PV 623 Hydraulic Pressure Relief Valve 2,900 to 5,800 PSI $ 200IO620-PRV-H-4 PV 623 Hydraulic Pressure Relief Valve 4,350 to 10,000 PSI $ 200IO620-PRV-H-5 PV 623 Hydraulic Pressure Relief Valve 8,700 to 15,000 PSI $ 200IO620-104-ADPT DPI 104 Adapter Kit for PV62X Pressure Stations $ 1525854P-4M 1/4" Male Fitting for 5854P Series Hose Kit $ 104860P Quick-test hose, brass hose ends, 3ft $ 425854P-3 High-Pressure Hose Kit, 6,000 PSI, 3ft $ 118QTHA-2FS0-QD 1/4" female NPT quick-disconnect male QT, without check-valve, S.S. $ 48IO620-HOSE-P2 6ft Pneumatic Hose Kit $ 373IO620-HOSE-H2 6ft Hydraulic Hose Kit $ 390IO620-NPT 1/8", 1/4", 3/8", and 1/2" Female Pressure Adapter Set $ 208IO620-COMP Comparator Adapter, "Tee" for Gauge Mounting $ 286IO620-BLANK Blanking Plug $ 52IO620-CASE-3 Pressure Station Carrying Case $ 74"Tee" Fitting Permitting User to Mount (2) Gauges on the Pressure Base. (IO620-COMP)

IO620-COMP

Page 14: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

14 Better by Your every measure.Better by Your every measure.14

The 23614P quickly and easily generates hydraulic pressures with minimal effort and provides excellent control even at high pressures.

• Pressures to 10,000 or 15,000 PSI• Compatible with Many Fluids• Quick Priming Function• Vernier Adjust for Fine Control

Transcat 23614P Hydraulic Hand Pump

• -28.5 “Hg to 600 PSI in a Single Pump• Precision Vernier and Vent Controls• Reaches 30 or 100 PSI Faster than any Other

Transcat 23622P Pressure/Vacuum Pump

Easily switch between vacuum and pressure with the press of a single button.

• Pressure to 45PSI and Vacuum to -27 “Hg• Portable Hand Operated• Precision Vernier Adjustment (0.00145 PSI)

• Pressure Relief Valve may be set from 20 “H2O to 30 PSI• Nickel Plated Brass and Anodized Aluminum

Transcat 23620PLow Pressure and Vacuum Test Pump

One Button Selection of Pressure/Vacuum.

Order # Description Price 23614P-KIT Hydraulic Hand Pump 10,000 PSI with Service Kit $ 962 Containing: Seals, O-ring, Screws, Allen Wrench 23625P-KIT Hydraulic Hand Pump 15,000 PSI with Service Kit $ 1,207 Containing: Seals, O-ring, Screws, Allen Wrench 23638P 10,000 PSI Tubing/Fittings Kit (4 Ft) for 23614P $ 241 5854P-3 6,000 PSI Tubing/Fittings Kit (3 Ft) $ 118 1400-C Hard Carrying Case $ 115

Order # Description Price 23622P-KIT Transcat 23622 Pneumatic Hand Pump (VAC/Pressure) $ 599 with Service Kit Containing Seals, O-Ring, Screws, Allen Key 23619P Replacement Hose and 1⁄4” Fitting $ 95

Order # Description Price 23620P-KIT Precision Pneumatic Hand Pump with Service Kit with Seals, $ 596 O-Rings, Screws, Allen Wrench

FREE Ser vice Kit!

SAVE $91

FREE Ser vice Kit!

SAVE $91

FREE Ser vice Kit!

SAVE $91

Page 15: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

15Call: 800-828-1470 • Transcat.comCall: 800-828-1470 • Transcat.com 15

Druck DPI 104 from GEPrecision Pressure Test Gauges

Combines precision and functionality in a compact, robust and simple to use package.

• Dial and Stem Rotate Separately – Permits More Viewing Options• 0.05% Full Scale Accuracy• Pressure Ranges to 20,000 PSI (1400 bar)• Temperature Compensated Accuracy

• IDOS Compatible with RS-232 Interface and Networking Capability• Intrinsically Safe (DPI104 IS)• ATEX, IECEx, cETL (Canada) (DPI104 IS)

ISISIntrinsically Saf

e

DPI 104 IS New Boot

Order # Description Price95480PR 10 PSI, Gauge, ¼" NPT Male, Accuracy - 0.15% FS $ 58795481PR 30 PSI, Gauge, ¼" NPT Male, Accuracy - 0.05% FS $ 58795482PR 100 PSI, Gauge, ¼" NPT Male, Accuracy - 0.05% FS $ 58795884PR Intrinsically Safe 10 PSI, Gauge, ¼” NPT Male, Accuracy - 0.15% FS $ 87495887PR Intrinsically Safe 100 PSI, Gauge, ¼” NPT Male, Accuracy - 0.05% FS $ 87495888PR Intrinsically Safe 100 PSI, Absolute, ¼” NPT Male, Accuracy - 0.05% FS $ 87495891PR Intrinsically Safe 1000 PSI, Gauge, ¼” NPT Male, Accuracy - 0.05% FS $ 87495892PR Intrinsically Safe 1000 PSI, Absolute, ¼” NPT Male, Accuracy - 0.05% FS $ 87495894PR Intrinsically Safe 5000 PSI, Sealed Gauge, ¼” NPT Male, Accuracy - 0.05% FS $ 87495895PR Intrinsically Safe 10,000 PSI, Sealed Gauge, ¼” NPT Male, Accuracy - 0.05% FS $ 874IO620-104-ADPT DPI 104 Adapter Kit for PV62X Pressure Stations $ 152Transcat Accredited Calibration Call

Transcat.com

More Ranges @

Transcat Tubing & Fittings

Tubing and fitting kits for high and low pressure.

• 5854P-3 and the 5854P-6 Include Two Tubing Sections with Fittings and Adapters for 1⁄4" and 1⁄8" NPT• 5854P-3 and the 5854P-6 Kits Fit All Hand

Pumps for High Pressure Use to 6,000 PSI• 6218P Includes Three Sections of 1⁄16" ID PVC Tubing and Selection of Quick Connect Fittings and Adapters

5854P-3

6218P

Order # Description Price5854P-3 High Pressure Tubing/Fitting Kit, 3 ft. (6000 PSI) $ 1185854P-6 High Pressure Tubing/Fitting Kit, 6 ft. (6000 PSI) $ 14123638P 10,000 PSI Tubing/Fitting Kit, 4 ft. for 23614P Pump $ 2416218P Low Pressure Tubing/Fitting Kit (200 PSI) $ 69

Page 16: Calibration and Communicator Solutions for your Plant! · PV 621-IS Intrinsically Safe Pneumatic Pressure Station 300 PSI $ 1,795 PV 622-IS Intrinsically Safe Pneumatic Pressure Station

16

WIN a Kindle Fire!

Better by Your every measure.

By viewing the demo and giving us your feedback, you will be entered into a drawing to Win one of two Kindle Fire Tablets

The drawing will be held December 15th 2011. Winners will be notified by phone or email.

Want to See More?

Transcat.com/druck620

Go online to view the 5 minute video and take our 2 minute survey to qualify for drawing to win one of two Amazon Kindle Fire tablets*