camel & vactor brochure 012814 layout 1 1/28/14 12:43 · pdf filecamel & vactor...

800.837.9711 • www.superproductsllc.com

VACTOR 2100 PLUS (PD) UNIT COMPARISON

CAMEL®1200

Camel & Vactor Brochure 012814_Layout 1 1/28/14 12:43 PM Page 29

CAMEL 1200 QUICK HIT ADVANTAGES / TOC

2Camel 1200 / Vactor 2100 Plus Comparison 2

OVERALL UNIT HEIGHT

• Unit features an overall height of just 11' 6".

• Lower center of gravity

• Increased stability

• Comfortably fit inside a standard 12' door

SINGLE ENGINE DESIGN

• Simple Operation. One switch located insidecab to engage drive system. Two dials at operator’sstation: One for vacuum; one for water

• Operating RPM of 1500, 15% lower operatingRPMs than competitors’ single�engine units.

WATER PUMP

• Rated design capacity of 100 GPM and 3000 PSIcontinuous duty

• Dual nitrogen�charged accumulators withon/off valve. Accumulators equipped with valveto allow operators to selectively activate blockagebusting feature. One pound accumulator withoperating pressure from 800 to 1400 PSI. Twoand a half pound accumulator with operatingpressure from 1400 to 3000 PSI

• For serviceability, the water pump does not require removal from the unit chassis for maintenance or repair. Additionally, there is amaximum of three seals required for reassemblyof the pump.

WATER TANKS

• 6" inspection ports on top of each tank

• Replenish the 1500 gallon water supply in 10 minutes or less

FRONT MOUNTED HOSE REEL

• The reel has a capacity of 1000' of 1" hose; or 800' of 1 ¼" hose

• Plumbing from water pump to reel core is 1 ¼" for improved water flow efficiency

• A containment system consisting of a guardconstructed entirely of Lexan encloses the topquarter portion of the hose reel. The transparentcontainment system permits viewing of hosereel and sewer hose, while protecting the operator from hose burst or coupling failure.

FRONT CONTROL PANEL

• Simple operator controls

POWER BOOM

• The boom has 250° hydraulic worm gear rotation, lockable in any position with a verticallift of 21 feet (44°)

• The boom is capable of 3 feet (19°) downwardpivot from its horizontal position for quick andeasy removal of boom hose

• The boom lifting capacity is 1000 pounds

• The boom has a reach of 312 inches from centerline of unit. The hydraulic boom extensionis 8' and is a true telescoping tube inside of tubedesign which will extend and retract without affecting the vertical position of the workingend. The boom structural support tubes areequipped with ultra�high density polyethyleneslides to reduce friction and do not require lubrication, no grease.

VACUUM SYSTEM

• Single 14" diameter, internal stainless steelfloat ball supplied for automatic vacuum systemshut off when unit is full

• Heavy duty, industrial size cyclone separatorbetween the positive displacement vacuumpump and the debris tank with a 16" diameterclean out door. The cyclone has 2012 cubic inchinternal operating size and separates down to50 micron

• Vacuum relief vent door instantly relieves thevacuum. Switch is located at the operator’s sta-tion to open the 6" vent door via an air cylinderto relieve the vacuum without disengaging thevacuum pump

• In addition to the cyclone, this unit has the optional pleated final filter assembly

• Filters air down to 10 microns.

4 14

16

18

6

8

10

12

SinglePages 2&9_Layout 1 2/3/14 9:34 AM Page 3

CAMEL 1200 QUICK HIT ADVANTAGES / TOC

3 Camel 1200 / Vactor 2100 Plus Comparison3

DEBRIS BODY

• Cylindrical shaped for strength and constructedof abrasion and corrosion resistant 1/4" Extensteel

• Full ten (10) year warranty!

• Hydraulic powered open and close, full heightand width flat rear door with self�compensating,double lipped neoprene seal located on door.Rear door to be opened and closed by two,power up/down hydraulic cylinders. The doorwill hydraulically open 90° to allow easy andcomplete unloading

• Large one piece rear splash shield.

• Dual make/break connection between debrisinlet pipe and boom will compensate for unevenroad and ground conditions by way of spring�loaded and gasketed mating plates, no moredrips and dribbles down the front of the tank.

• The debris inlet pipe is constructed of heavyduty 3/8" thick AR steel bolted to the debristank and does not require cutting or welding to replace.

• Exclusive Acculevel™ radar debris level sensorwith digital display at operator’s station

DEBRIS BODY UNLOADING

• Super Products offers two types of unloadingsystems, our tip to dump system which dischargesthe payload by hydraulically raising the collectorbody to a 50°dump angle and on this unit ourfull diameter ejector unloading system

• The advantages of our ejector unloading system

• No high angle elevation of the debris tank todump the load

• Reduced chance of hitting overhead obstruc-tions such as power lines

• The ejector plate acts as a baffle to reduceload sloshing during transit

• Outstanding debris/water separation fordraining of excess liquid

• Quick and complete removal of any type ofpayload

• Less time at the dump site.

• In addition to the side controls, all unloadingfunctions can be operated with the wireless remote. This gives the operator complete control from any location around the unit.

• When unloading the unit where the front of thetruck is in a nose down position the forwardsection of the debris tank can raise 24" to assistin cleanout

SUPERPAK COMPACTION & DEWATERING

• With ejector unloading our unit has outstandingdebris/water separation for draining off excess liquid

• Stay on the job longer

• Less trips to the dumpsite

• Take drier loads to the dumpsite

• The plate holds solids on one side, allowing liquids to flow behind the plate where they canbe drained out using our 6" gravity drain located in the front section of the debris body.

• To speed up this dewatering process our SuperPak systems operates the ejector plate with the rear door closed, compacting the load andforcing liquid around the plate where it can bedrained out.

• After compaction and draining of excess liquidis complete, the ejector plate is returned to thehome position

• This compaction cycle can be repeated as oftenas necessary until a full load of solid material is obtained

TUBE STORAGE

• Storage for up to four (4) tubes on rear doorwith ratchet strap retainers.

• Curb side vertical tube racks to hold an additional six (6) tubes with ratchet strap retainers

20

22

24

26

Camel & Vactor Brochure 012814_Layout 1 1/28/14 12:42 PM

OVERALL HEIGHT

4Camel 1200 / Vactor 2100 Plus Comparison

Camel 1200

4

Vactor 2100 Plus (PD)


Camel 1200• Unit features an overall height of just 11' 6".

• Lower center of gravity

• Increased stability

• Comfortably fit inside a standard 12' door

Vactor 2100 Plus (PD)• Unit has an overall height of 13' 2"

OVERALL HEIGHT





Camel 1200

Vactor 2100 Plus (PD)

6


Camel 1200• Highly‐efficient, single‐engine design offers manyend‐user benefits

• 40% reduction in fuel usage compared to dual‐engine units

• Less maintenance

• Lighter weight unit capable of carrying largerpayloads

• Simple Operation. One switch located inside cabto engage drive system. Two dials at operator’sstation: One for vacuum; one for water.

• 15% lower operating RPMs than competitors’ single‐engine units

• Operating RPM of 1500

Vactor 2100 Plus (PD)• Highly‐efficient, single‐engine design offers manyend‐user benefits

• 40% reduction in fuel usage over dual engine units

• Less maintenance

• Lighter weight unit capable of carrying largerpayloads

• Specific sequential operation procedure must be followed to engage water and vacuum systems.Systems will not operate correctly if done incorrectly

• Operating RPM of 1760




WATER PUMP


Camel 1200

Vactor 2100 Plus PD

8


Camel 1200• Super Products double‐acting, single‐piston

hydraulic‐powered water pump with 1:1 oil towater ratio

• Only five (5) moving parts, opposed to hundredson triplex pump design results in greater efficiency,less wear, decreased heat, longer pump life and reduced downtime


• Water pump driven hydraulically by a tandem hydraulic pump powered by a transmission‐mountedhot shift PTO

• Pump mounted below water tanks and forward ofdebris tank to assure flooded inlet at all times toprevent cavitation and use 100% of water supply

• Heavy‐duty industrial, cast iron, groove‐lockwater piping. Robust design, built to last

• An inline, water‐charged oil cooler installed between the water tanks and the pump

• Dual nitrogen‐charged accumulators with on/offvalve. Accumulators equipped with valve to allowoperators to selectively activate blockage bustingfeature. One pound accumulator with operatingpressure from 800 to 1400 PSI. Two and a halfpound accumulator with operating pressure from1400 to 3000 PSI

• Control panel switch operates engagement anddisengagement of the water pump

• Multi‐flow arrangement provides independentcontrol of water and vacuum systems. A variablecontrol dial controls water flow and pressurewithout effecting engine RPMs or vacuum

• For serviceability, the water pump does not requireremoval from the unit chassis for maintenance orrepair. Additionally, there is a maximum of threeseals required for reassembly of the pump.

Vactor 2100 Plus (PD)• Double‐acting, single‐piston hydraulic‐powered

water pump with 1:1 oil to water ratio

• Only five (5) moving parts, opposed to hundreds ontriplex pump design, results in greater efficiency,less wear, decreased heat, longer pump life and reduced downtime


• Water pump driven hydraulically by a tandem hydraulic pump powered by a transmission‐mountedhot shift PTO

• Pump mounted below water tanks and forward ofdebris tank to assure flooded inlet at all times toprevent cavitation and use 100% of water supply

• Heavy‐duty industrial, cast iron, groove‐lockwater piping. Robust design, built to last

• An inline, water‐charged oil cooler installed between the water tanks and the pump

• A Single 2-1/2 lb. nitrogen‐charged accumulatorwith on/off valve. Accumulator equipped withvalve to allow operator to selectively activateblockage busting feature. Accumulator operatingpressure from 1400 to 2500 PSI

• Control panel switch operates engagement anddisengagement of the water pump

• Multi‐flow arrangement provides independentcontrol of water and vacuum systems. A variablecontrol dial controls water flow and pressurewithout effecting engine RPMs or vacuum

• For serviceability, the water pump does requireremoval from the unit chassis for maintenance orrepair. Additionally there is a maximum of threeseals required for reassembly of the pump.

WATER PUMP


SinglePages 2&9_Layout 1 2/3/14 9:34 AM Page 4

WATER TANKS


Camel 1200

Vactor 2100 Plus PD

10


Camel 1200• Unit comes with 1500 gallon water capacity

• Capacity is divided into 250 gallon, separate,self‐baffling cells

• The water tanks are constructed of ¼" thick rotational molded non‐cross linked polyethylenewith ultraviolet stabilizer

• Non‐cross linked polyethylene is a repairable material in the event a tank is damaged.

• Single curb‐side fill with strainer to filter waterbefore it enters tank.

• 4" anti‐siphon air gap• Sight tubes located on both sides of water tanks

• 6" inspection ports on top of each tank

• 4" rear mounted stainless steel crossover for quick filling.

• Replenish the 1500 gallon water supply in 10 minutes or less.

• Standard ten (10) year warranty against defects in material and workmanship

Vactor 2100 Plus (PD)• Unit comes with 1300 or 1500 gallon water capacity

• Capacity is divided into multiple aluminum cells.For units with 1500 gallon capacity, tanks are located between chassis frame rails under debrisbody

• The water tanks are constructed of aluminum,which is repairable either by welding or patches in the event a tank is damaged

• Single curb‐side fill• 6" anti‐siphon air gap• Sight tubes located on both sides of water tanks

• No inspection ports on tanks

• 4" and 6" connections between tanks

• 25 minutes required to replenish 1500 gallonwater supply

• Standard ten (10) year warranty against cracking,distortion, oxidation and corrosion

WATER TANKS





Camel 1200

Vactor 2100 Plus PD

12


Camel 1200• The hose reel is front mounted at the center ofthe unit with 180° manual rotation to facilitatemanhole entry and reduce traffic flow interruption

• Rotation occurs between the headlights of thetruck chassis keeping the reel at a centered positionat all times, keeping the operator out of traffic.

• Hose reel assembly rotates on a large diameterball bearing and includes a pneumatically actuatedlock, which will positively lock the reel in any position across its operating range.

• The reel has a capacity of 1000' of 1" hose; or 800'of 1 ¼" hose.

• Plumbing from water pump to reel core is 1 ¼"for improved water flow efficiency.

• Reel driven by a double chain and sprocket.

• Reel in/out is operated by a joy stick control withspeed control.

• In addition to the joy stick, the reel rotation canbe operated by the wireless remote pendant control.Using the wireless remote, combined with thehands free automatic level wind system, makes foreasiest front reel unit to operate on the markettoday

• A containment system consisting of a guard constructed entirely of Lexan encloses the topquarter portion of the hose reel. The transparentcontainment system permits viewing of hose reeland sewer hose, while protecting the operatorfrom hose burst or coupling failure.

• The reel frame is capable of pivoting down toallow for tilting of the chassis hood by use of anelectric over hydraulic system powered by a 12volt DC power pack. In the event of engine ortransmission failure, this power pack can operateany hydraulic system on the unit without thetruck running

Vactor 2100 Plus (PD)• The hose reel is front mounted at the center ofthe unit with 180° manual rotation to facilitatemanhole entry and reduce traffic flow interruption.

• Rotation occurs between the headlights of thetruck chassis keeping the reel at a centered positionat all times, keeping the operator out of traffic.

• Hose reel assembly rotates on a large diameter ballbearing and includes a pneumatically actuated lock,which will positively lock the reel in any positionacross its operating range

• The hose reel has a capacity of 600' of 1" I.D.sewer hose (Optional 800' and 1000')

• Plumbing from water pump to reel core is 1"

• Reel driven by a double chain and sprocket

• Reel in/out is operated by a joy stick control withspeed control

• An optional containment system encloses the top¼ of the hose reel consisting of a guard constructedof metal bars

• The reel frame is capable of extending out 18inches allow for full access of opening the chassishood. System operates off of hydraulic system andrequires chassis to be running




FRONT CONTROL PANEL


Camel 1200

Vactor 2100 Plus PD

14


Camel 1200• All operational functions are controlled up frontat the operators control panel.

• We offer the latest in digital control technology.

• Simple operator controls.

• Color digital display features standard and optional items.

• Tachometer

• Sewer hose footage with 10 bank memory

• Water pressure readout

• Engine hour meter

• Vacuum pump hour meter

• Water pump hour meter

• Water level

• Debris level indicator

• Engine oil pressure

• Fuel level

• Fuel consumption

• Water flow and pressure dial

• Vacuum increase dial

• Engine kill switch (E‐Stop)• LED panel lights

• Six panel rocker controls include:

• Vacuum / Dump mode switch

• Vent door

• Winter Recirculation

• Waste water recycling

• Boom lights

• Vacuum booster

Vactor 2100 Plus (PD)• All operational functions are controlled up frontat the operators control panel.

• Vansco Multiplexed module programmable logiccontrollers

• Ladder logic activates and deactivates specific inputsand outputs of the system. Multi‐step process forsystem engagement. Safety inter‐locks to preventaccidental system activation.

• 3.0" x 2.2" color digital display features

• Color digital display features standard and optional items.

• Tachometer

• Sewer hose footage with 10 bank memory

• Oil dampened water pressure gauge

• Engine hour meter

• Vacuum pump hour meter

• Water pump hour meter

• Water Flow (GPM)

• Vacuum pump speed

• Engine oil pressure and temperature

• Fuel level

• Fuel consumption

• High pressure water pump on/off

• Engine throttle

• Engine kill switch (E‐Stop)

FRONT CONTROL PANEL



POWER BOOM


Camel 1200

Vactor 2100 Plus PD

16


Camel 1200• The boom has an 8" vacuum system with a heavyduty channel reinforced elbow for added life.

• Boom elbow is bolted for easy replacement.

• The boom has 250°hydraulic worm gear rotation,lockable in any position with a vertical lift of 21feet (44°).

• In addition the boom is capable of 3 feet (19°)downward from its horizontal position for quickand easy removal of boom hose.

• The boom lifting capacity is 1000 pounds in thefully extended position.

• The boom has a reach of 312 inches from centerlineof unit. The hydraulic boom extension is 8' and isa true telescoping tube inside of tube designwhich will extend and retract without affectingthe vertical position of the working end. Theboom structural support tubes are equipped withultrahigh density polyethylene slides to reducefriction and do not require lubrication, no grease!

• A heavy duty joy stick is permanently mounted tothe operator control station for boom functions:up, down, left and right, in/out.

• The boom has a wired and wireless remote controlled pendant. The boom pendant is capableof up to 20 functions.

• A boom rest for transport is mounted directly tothe sub frame with a high density polyethylenepad on the boom to eliminate steel on steel contact.

• Boom does not raise with debris body

Vactor 2100 Plus (PD)• 8" vacuum system with either a telescopic extension with steel elbow or extendable boomwith rubber elbow.

• Boom elbow is bolted for easy replacement. (On telescopic model)

• The boom has 180°hydraulic rotation. Rotation isaccomplished via dual hydraulic cylinders.

• The boom lifting capacity is 800 pounds in thefully extended position.

• The boom has a reach of 277 inches from center-line of unit. The hydraulic boom extension is 8'and is either a true telescoping tube inside of tubedesign which will extend and retract without affecting the vertical position of the working end,or extendable which will shorten up the end of theboom when extended. The boom structural supporttubes are equipped with ultra‐high density polyethylene slides to reduce friction and do notrequire lubrication, no grease!

• A heavy duty joy stick is permanently mounted tothe operator control station for boom functions:up, down, left and right, in/out.

• The boom has a wired and wireless remote controlled pendant.

• A boom rest for transport is mounted directly tothe sub frame.

• Boom does not raise with debris body

POWER BOOM



VACUUM SYSTEM


Camel 1200

Vactor 2100 Plus PD

18


Camel 1200• Rotary lobe positive displacement “Roots type”vacuum pump using two figure�eight impellersrotating in opposite directions to move entrappedair around the case to the outlet port. Pump israted for continuous duty.

• Wide variety of vacuum pumps for different applications.

• 18" Hg. to 27" Hg.

• 3500 CFM – 6000 CFM

• Unit equipped with a high efficiency exhaust silencer.

• Low DBA levels

• Operator friendly

• Environmentally friendly

• Vacuum pump direct shaft driven from the transfer case without the use of belts, poly chainsor intermediate hydraulic or hydrostatic systems.

• Efficiently transfers engine horse power to vacuum system

• Low maintenance

• Lower operating RPM’s

• Low DBA levels

• Controls to engage and disengage vacuum pumpare located inside the chassis cab.

• Single 14" diameter, internal stainless steel floatball supplied for automatic vacuum system shutoff when unit is full.

• Heavy duty, industrial size cyclone separator between the positive displacement vacuum pumpand the debris tank with a 16" diameter clean outdoor. The cyclone has 2012 cubic inch internaloperating size and separates down to 50 micron.

• Vacuum relief vent door instantly relieves the vacuum. Switch is located at the operator’s stationto open the 6" vent door via an air cylinder to relieve the vacuum without disengaging the vacuum pump.

• In addition to the cyclone this unit has the optional pleated final filter assembly.

• Great for hydro excavation work

• Filters air down to 10 microns

• Filter is cleanable either using air or high pressure water

Vactor 2100 Plus (PD)• Rotary lobe positive displacement “Roots type”vacuum pump using two figure�eight impellersrotating in opposite directions to move entrappedair around the case to the outlet port. Pump israted for continuous duty.

• Wide variety of vacuum pumps for different applications.

• 18" Hg. to 27" Hg.

• 3500 CFM – 6000 CFM

• Unit equipped with a high efficiency exhaust silencer.

• Low DBA levels

• Operator friendly

• Environmentally friendly

• Vacuum pump direct shaft driven from the transfercase without the use of belts, poly chains or intermediate hydraulic or hydrostatic systems.

• Efficiently transfers engine horse power to vacuum system

• Low maintenance

• Lower operating RPM’s

• Low DBA levels

• Controls to engage and disengage vacuum pumpare located inside the chassis cab.

• Dual 10" stainless steel shut�off balls located inthe debris body, encased in non�corrosive removablecages

• Dual vertical cyclone centrifugal separators installed at the rear of the unit, two per side withclean out door

• Vacuum relief vent door instantly relieves the vacuum. Switch is located at the operator’s stationto open the 3" vent door via an air cylinder to relieve the vacuum without disengaging the vacuum pump

• Three stainless steel micro�strainers hosed in onehorizontal chamber filters air prior to the blowerinlet. Screens removed for cleaning.

• Hydro excavation work

• Filters air down to 30 microns

• Filter is cleanable either using air or high pressure water

VACUUM SYSTEM



DEBRIS BODY


Camel 1200

Vactor 2100 Plus PD

20


Camel 1200• The debris body is available in 9 & 12 cubic yardcapacities

• Cylindrical shaped for strength and constructed ofabrasion and corrosion resistant 1/4" Exten steel

• Designed to withstand 360" of water vacuum

• Full ten (10) year warranty!

• Hydraulic powered open and close, full height and width flat rear door with self‐compensating,double lipped neoprene seal located on door. Reardoor to be opened and closed by two, power up/downhydraulic cylinders. The door will hydraulicallyopen 90° to allow easy and complete unloading

• Four mechanical, wedge style, hydraulically operatedtailgate latches secure the rear debris tank door.Hydraulic latching is accomplished by a singlehydraulic cylinder with mechanical linkage, separate from the door open close cylinders. Thedesign of the locking system will not allow tailgateto open if hydraulic power is lost.

• Large one piece rear splash shield.

• Dual make/break connection between debris inletpipe and boom will compensate for uneven roadand ground conditions by way of spring‐loadedand gasketed mating plates, no more drips anddribbles down the front of the tank.

• The debris inlet pipe is constructed of heavy duty3/8" thick AR steel bolted to the debris tank anddoes not require cutting or welding to replace.

• Exterior mechanical liquid level gauge. Stainlesssteel float and rod.

• Exclusive Acculevel™ radar debris level sensorwith digital display at operator’s station

Vactor 2100 Plus (PD)• The debris body is available in 6, 9, 12 & 16 cubicyard capacities

• Cylindrical shaped for strength and constructed ofabrasion and corrosion resistant 3/16" Exten steel.

• Full five (5) year warranty

• Hydraulic powered open and gravity down, threequarter height flat rear door with self-compensat-ing replaceable neoprene seal to prevent leakage.Rear door to be opened by two hydraulic cylinders.The door will hydraulically open 50°.

• Four mechanical, wedge style, hydraulically operated tailgate latches secure the rear debristank door. Hydraulic latching is accomplished by asingle hydraulic cylinder with mechanical linkage, separate from the door open close cylinders. Thedesign of the locking system will not allow tailgateto open if hydraulic power is lost

• Two piece, five sided rear splash shield

• Single make/break connection between debrisinlet pipe and boom

• The debris inlet pipe is welded in the front sectionof debris body

• Exterior mechanical liquid level gauge. Stainlesssteel float and rod

DEBRIS BODY





Camel 1200

Vactor 2100 Plus PD

22


Camel 1200• Super Products offers two types of unloading systems, our tip to dump system which dischargesthe payload by hydraulically raising the collectorbody to a 50°dump angle and on this unit our fulldiameter ejector unloading system

• The advantages of our ejector unloading system

• No high angle elevation of the debris tank todump the load

• Reduced chance of hitting overhead obstructionssuch as power lines

• The ejector plate acts as a baffle to reduce loadsloshing during transit

• Outstanding debris/water separation for drainingof excess liquid

• Quick and complete removal of any type of payload

• Less time at the dump site.

• Controls for latching/unlatching, opening/closingand extending/retracting ejection plate are locatedon the curbside behind the cab and forward of thedebris tank for operator safety.

• In addition to the side controls we offer all unloading functions on the wireless remote. Thisgives the operator complete control from any location around the unit.

• When unloading the unit where the front of thetruck is in a nose down position the forward sec-tion of the debris tank can raise 24" to assist incleanout

Vactor 2100 Plus (PD)• Tip to dump system which discharges the payloadby hydraulically raising the collector body to a 50°dump angle

• Controls for latching/unlatching, opening/closingthe rear door along with raising the tank are locatedon the curbside behind the cab and forward of thedebris tank






Camel 1200

Vactor 2100 Plus PD

24


Camel 1200• With ejector unloading our unit has outstandingdebris/water separation for draining off excess liquid

• Stay on the job longer

• Less trips to the dumpsite

• Take drier loads to the dumpsite

• The plate holds solids on one side, allowing liquidsto flow behind the plate where they can be drainedout using our 6” gravity drain located in the frontsection of the debris body.

• To speed up this dewatering process our SuperPak systems operates the ejector plate with therear door closed, compacting the load and forcingliquid around the plate where it can be drained out.

• After compaction and draining of excess liquid iscomplete, the ejector plate is returned to thehome position

• This compaction cycle can be repeated as often as necessary until a full load of solid material isobtained

Vactor 2100 Plus (PD)• Compaction and dewatering feature not availableon Vactor unit. Only gravity drains




STORAGE


Camel 1200

Vactor 2100 Plus PD

26


Camel 1200• Up to four (4) large diamond plated aluminumtoolboxes available, three on the curb side andone on the driver’s side of the unit.

• Curbside toolbox dimensions — 18" x 18" x 48" (9 cu/ft)

• Drivers side toolbox dimensions — 14" x 22" x 60"(11 cu/ft)

• Storage for up to four (4) tubes on rear door withratchet strap retainers.

• Curb side vertical tube racks to hold an additionalsix (6) tubes with ratchet strap retainers

Vactor 2100 Plus (PD)• Up to three (3) diamond plated aluminum toolboxesavailable, one on the curb side and two on the driver’s side of the unit.

• Curbside toolbox dimensions — 17" x 30" x 48" (14 cu/ft)



• Storage for up to two (2) tubes on rear door withquick release retainer handles

• Two (2) folding 3‐pipe tube racks provided curband street sides of unit, constructed of steel tubing,spring assisted and include quick release retainerhandles

STORAGE



800.837.9711 • www.superproductsllc.com

SUPER PRODUCTS LLC • 17000 W. CLEVELAND AVE • NEW BERLIN, WI 53151 USA • P: 262.784.7100 F: 262.784.9561

© 2014 Super Products LLC. 2/14


camel & vactor brochure 012814 layout 1 1/28/14 12:43 · pdf filecamel & vactor...

Documents