canflex metallic gaskets - stecindustrial.cl€¦ · gasket identification markings required by...

FLUID CONTAINMENT AND CONTROL SPECIALISTS SINCE 1967

CANFLEX® METALLIC GASKETS

Manufacturer's nameor Trademark

Spiral Winding

Winding Metal and Filler

Material

Inner Ring

Manufactured toASME B16.20

Nominal Pipe Sizesand Pressure Classes(standard gaskets only)

Inner Ring MaterialStamped on Inner Ring (when other than Carbon Steel or PTFE)

Outer ring material(when other than Carbon Steel)

Outer (centering) ring

No ColorCANFLEX® Thermal Guard

CANFLEX® High Temp

No Color

No Color

Temperature Limits for Common Metals

Temperature Limits for Filler Material

Gasket Identification MarkingsRequired by ASME B16.20

Spiral Wound Specifications

CANFLEX® Spiral Wound Gaskets

Manufactured in Accordancewith ASME B16.20

Spiral wound gaskets — made with an alternating combination of formed metal wire and soft filler materials — form a very effective seal when compressed between two flanges. A V-shaped crown centered in the metal strip acts as a spring, giving the gaskets greater resiliency under varying conditions.Filler and wire material can be changed to accommodate different chemical compatibility requirements. If the load available to compress a gasket is limited, gasket construction and dimensions can be altered to provide an effective seal.

A spiral wound gasket may include a centering ring, an inner ring or both. The outer centering ring accurately positions the gasket within the flange and acts as a compression limiter, while the inner ring provides additional radial strength. The inner ring also reduces flange erosion and protects the sealing element.

Resiliency and strength make spiral wound gaskets an ideal choice under a variety of conditions and applications. Widely used throughout refineries and chemical processing plants, spiral wound gaskets are also effective for power generation, aerospace, and a variety of valve and specialty applications.

The ASME B16.20 gasket specification has been updated and changed to a new recommended standard. The new criteria incorporates a default to inner rings in all graphite-filled spiral wound gaskets unless the purchaser specifies otherwise. However, a graphite-filled spiral wound gasket without an inner ring will still be stamped with and in compliance to the ASME B16.20 standard.

Advantages■ Durable; easy installation and removal■ Seals pressures to flange ratings, in accordance

with ASME B16.5■ Suited to temperatures from cryogenic to

2000 °F (1093 °C)■ Guide ring simplifies centering of sealing

element on the flange face.■ Custom-tailored solutions accommodate a

variety of conditions by combining various metals and filler materials.

Style RW■ General purpose gasket suitable for flat face and

raised face flanges up to Class 2500■ Centering ring accurately locates the gasket on the

flange face, provides additional radial strength, and acts as a compression limiter

■ Spiral winding (sealing element) consists of pre-formed metal and soft filler material

NOTE: An inner ring is recommended for applications above Class 600, due to the high available bolt load. See Style RWI.

Style RWI■ Suitable for flat face and raised face flanges up to Class 2500■ Recommended for higher pressure applications,

for use with PTFE fillers, and when delineated by ASME B16.20

■ Inner ring acts as a compression limiter and protects sealing elements from process media attack

Style CW■ Suitable for tongue and groove, male-female, or

groove-to-flat face flanges■ Spiral winding only, containing preformed metal and

soft filler material■ Inner and outer diameters of winding are reinforced

with several plies of metal without filler to give greater stability

NOTE: Also available with inner rings Style CWI.

■ Spiral winding only, containing preformed metal and soft filler material.

CANFLEX®

MC and MCR GasketsFor Manhole Cover Assemblies

(manhole cover)

CANFLEX® RW, RWI and CW Gaskets

MC Gasket

Spiral Winding(Sealing Element)

Centering Ring

Spiral Winding(Sealing Element)

Centering Ring

Spiral Winding

Inner Ring

Winding Only

MC Configurations

Oval

ObroundRound

Diameter Height

Height

Width

Width

CompressibleSealing Element

Metal Core

900 - S6G GasketWith flexible graphite sealing element■ Accommodates a wide range of temperatures■ Seals effectively during thermal cycling■ Fire safe - withstood API and FITT fire tests■ Chemically resistant■ Long service life

Benefits■ Accommodates standard ASME flanges as well as

weaker and non-circular flanges■ Seals less-than-perfect flanges■ Handles pressures from vacuum to Class 2500■ Performance replacement for jacketed heat

exchanger gaskets

900 - ePTFE GasketWith ePTFE sealing element■ Chemically inert■ Forms a tight seal under low bolt load■ Conforms to minor sealing surface imperfections■ Withstands temperatures up to 500°F (260°C)

Standard Metals■ 304 Stainless■ 316L Stainless■ INCONEL® 600■ INCONEL® 625■ INCOLOY® 800■ INCOLOY® 825■ HASTELLOY® C276■ MONEL® 400

Sealing Elements■ Flexible graphite■ ePTFE■ Combination graphite

and ePTFE

Superior PerformanceSerrated solid metal core

■ Serrations concentrate bolt load on small area for tight seal at lower stress

■ Solid metal core resists cold flow, over-compression and blowout■ Rigid core provides exceptional stability, even in

large sizes, and facilitates handling and installation

Soft, deformable sealing material

■ Under compression, fills seating surface imperfections to form a tight connection

■ Seals under low stress – ideal for weaker flanges■ Withstands extreme fluctuations in temperature and

pressure■ Integral centering ring ensures optimum gasket

positioning■ Floating centering ring allows for expansion and

contraction during thermal cycling

Applications■ Valves■ Pumps■ Flanges

■ Heat Exchangers■ Vessels

Applications■ Valves■ Pumps■ Flanges

■ Heat Exchangers■ Vessels

CANFLEX® Corrugated Gaskets

Ring Joint Gaskets (API 6A Certified)

CANFLEX® Cammprofile Gaskets

The superior technology of the CANFLEX® corrugated family of gaskets ensures excellent sealing performance and reliability, even in the most difficult applications. Each of the styles combines a corrugated metal core with a compressible sealing element of various materials, for resistance to a wide range of harsh conditions, including extreme temperature, corrosive chemicals, and thermal cycling.

Thomson RTJ gaskets are manufactured in all configura-tions (RX, BX, R Oval and Octagonal) and materials for API wellhead assemblies and high pressure / temperature ASME piping systems. Custom profile gaskets and lens rings are also available upon request.

Construction

CANFLEX® Cammprofile Styles

942 A

942 AR

942 AR2

Gasket Factor "M" = 4.00 "Y" (psi) = 2,500

Heat Exchanger Gasket Configurations

Gasket Styles

Other Styles of CANFLEX® Heat Exchanger Gaskets Available Upon Request

CANFLEX® Heat Exchanger Gaskets

Style 900 – Corrugated Solid MetalA plain, all-metal corrugated gasket

for use in low pressure applications that re-quire a thin line contact because of space or weight limitations. Corrugated gaskets are a versatile sealing ele-ment where the available bolt loads are low. Depending on the mate-rials and construction, these gaskets can be very resilient.

Style 923 – Double - JacketedThe double-jacketed gasket has good

compressibility and resilience and is the most popular clad gasket manufactured.

Style 926 – Double - Jacketed Corrugated

Concentric corrugated sealing element totally encapsulates the soft filler material. The corrugations give improved resilience in applications where thermocycling is a problem.

Style 929 – Double - Jacketed Corrugated with Corrugated Metal Filler

The metal filler in this style has greater resilience to prob-lems resulting from temperature changes. This unique multi-ply construction provides a more resilient gasket that adapts well to temperature and pressure cycling. The temperature limits of this gasket are governed only by the metal selected.

Style 940 – Solid MetalThis plain solid metal gasket

can be supplied in any desired configuration. Where bolting force is sufficient, this style is capable of extremely tight make-ups, giving high me-chanical strength, good heat conductivity, and resistance to temperature, corrosion and pressure.

Style 941 – Solid Metal ProfileProfile gaskets combine the

desirable qualities of a solid metal gasket with the advantages of a reduced area of contact, thereby reducing the bolt load required to effect a seal. This gas-ket has the same advantages of strength, heat conductivity, and resistance to temperature, pressure and corrosion as CANFLEX® Style 940.

www.arthomson.com

CORPORATE PROFILE

The A.R. Thomson Group was established in 1967 as a regional manufacturer/ distributor of gaskets and other fluid containment products. With the rapid growth of oil and gas production, petrochemical, oil refining and pulp and paper industries, our manufacturing facilities expanded to meet increased demand for these products. We currently design and manufacture a wide variety of products using the latest technology. Some examples include:

• allvarietiesofindustrialmetallicandnon-metallicGaskets

• Pre-formedPackinGsetsforvalves,PumPsandmixers

• flexiblemetalhoseandexPansionjoints

• sealsPecialtiesfortheoilandGasindustry

A.R. Thomson Group has also increased the product scope for its Fluid Control Division. This includes a complete line of process and specialty valves along with fittings, pumps and accessories for process as well as product transfer piping systems.

Further to our industrial product offering, ARTG has developed an Energy Efficiency and Environmental program which identifies and minimizes system inefficiencies. The various elements of the program can significantly reduce operating costs and environmental impact. As part of this program ARTG has developed a technical services team which provides:

• on-sitetraininG

• equiPmentsurveysandaudits

• aPPlicationenGineerinG

• maintenanceandrePairoPtimizationProGrams

Since 1967, we have developed our expertise and know-how to become the leader in solving fluid containment and control problems. No matter what your control or containment needs, we can help.

*Red Deer#279 - 37428 Range Road 273T4E 0A1Phone: (403) 341-4511Fax: (403) 341-4243

*Denotes manufacturing location.

Parksville#8 - 1009 Allsbrook RoadV9P 2A9Phone: (250) 954-1543Fax: (250) 954-1591

Calgary#7 - 6320 11th Street SET2H 2L7Phone: (403) 253-0161Fax: (403) 258-0394

Dartmouth10 Morris Drive, Unit 32B3B 1M2Phone: (902) 468-9120Fax: (902) 468-9087

*Surrey7930 130th StreetV3W 0H7Phone: (604) 507-6050Fax: (604) 507-6098

bRITISh COLUMbIA

Fort St. John8910 100th St., Unit CV1J 3X1Phone: (250) 785-6222Fax: (250) 785-6211

ALbERTA

*Fort McMurray230F Mackay CrescentT9H 5C6Phone: (780) 790-0730 Fax: (780) 790-0278

Grande Prairie9602 113th StreetT8V 4Z7Phone: (780) 538-1792Fax: (780) 538-3488

*Edmonton10030 - 31st AvenueT6N 1G4Phone: (780) 450-8080Fax: (780) 463-2021

*Pointe-Claire, PQ294 LabrosseH9R 5L8Phone: (514) 694-2442Fax: (514) 694-2445

SASkATChEwAN

Regina707E McDonald StreetS4N 5M2Phone: (306) 584-2422Fax: (306) 584-2599

qUEbEC NOvA SCOTIA

ONTARIO

MississaugaUnit 1A 3350 Ridgeway Dr L5L 5Z9Phone: (905) 607-6587Fax: (905) 607-6994

*Sarnia281 Campbell StreetN7T 2H2Phone: (519) 336-3678Fax: (519) 336-0589

Prince GeorgeUnit 7, 1839 - 1st AvenueV2L 2Y8 Phone: (250) 563-1444Fax: (250) 563-2644

Thunder BayUnit B 1131 Central Avenue P7B 7C9Phone: (807) 623-0641 Fax: (807) 623-5480

fluiD containment anD control specialists since 1967

CANFLEX® CAMMPROFILE GASKETS

CANFLEX® Cammprofile Gaskets

canflex®cammprofileselectionGuide

manufacturedfromsolidmetal,canflex®cammprofilegasketscombineallofthe

desirablequalitiesofasolidmetalgasketwiththeaddedadvantagesofareducedareaofcontact,resultinginlowerstressvaluesrequiredtoachieveaseal.asastandard,flexiblegraphiteisbondedtoeachfaceduetoitssuperiorsealingcharacteristics.othermetallurgiesandsoftgasketsealingmaterialsareavailableinordertoaccommodatespecificchemicalandtemperatureservicerequirements.

A.R. Thomson Group operates a quality management system which complies with the requirements of ISO 9001.

Style 942 Astandardconstructioncammprofilegasketconsistingofasolidgroovedmetalliccore.style942aisoftenchosenasareplacementfordouble-jacketedgasketsinconventionalheatexchangerapplications.cammprofilematerial,thicknessandsealfacingcanbechosentosuitspecificservicerequirements.

Style 942 ARintegralcenteringringensurescorrectgasketpositioningonmatingflanges.oftenusedonstandardpipeflangesinapplicationsupto2500#.

Style 942 AR2floatingcenteringringallowsforexpansionandcontractioninapplicationswherethermocyclingisprevalent.oftenusedonstandardpipeflangesinapplicationsupto2500#.

Important Note: Product specifications shown are typical. For specific application recommendations please consult your local A.R. Thomson Group representative. Failure to select proper sealing products could result in property damage and/or serious personal injury. A.R. Thomson Group is not liable

for consequential damages resulting from misuse or implied suitability for any service. Specifications are subject to change without notice.

CANFLEX® Cammprofile Styles

Style 942 A

Style 942 AR

Style 942 AR2

Gasket Factor "M" = 4.00 "Y" (psi) = 2,500

canflex®cammprofileorderinginformation

manufacturingspecifications

heatexchangerGasketconfigurations

• standardpipeflangeapplicationsfrom½”–24”• seriesa&bconfigurationsalsoavailableuponrequest• customheatexchangerapplicationupto157”od• customthicknessesfrom.100”to.250”thick• onepiececonstruction

• stylenumber

• metalcoreandsealingelementmaterial

• standardb16.5flanges:Pipeclass,sizeandthickness

• heatexchangers:od,id,thicknessandconfiguration(seeheatexchangerchart)

Pleasespecifythefollowinginformationwhenorderingcanflex®cammprofilegaskets:

+0.004-0.002

+0.005-0.0000.040"

0.004"

90°

R 0.015"

0.012 (ref.)

Cammprofile Core Dimensions

canflex®materialoptions

core material temperature limits

304SS 1400°F 760°C

316SS 1400°F 760°C

317SS 1400°F 760°C

321SS 1400°F 760°C

347SS 1700°F 925°C

Carbon Steel 1000°F 540°C

Alloy 20 1400°F 760°C

HASTELLOY® B2 2000°F 1090°C

HASTELLOY® C276 2000°F 1090°C

INCOLOY® 800 / 825 1600°F 870°C

INCONEL® 600 / 625 2000°F 1090°C

INCONEL® X750 2000°F 1090°C

MONEL® 400 1500°F 820°C

Nickel 200 1400°F 760°C

Titanium 2000°F 1090°C

sealing material temperature limits

Flexible Graphite 950°F 510°C

PTFE 500°F 260°C

EPTFE 600°F 325°C

CANFLEX® High Temp 1850°F 1000°C

www.arthomson.com

corporate profile


• allvarietiesofindustrialmetallicandnon-metallicGaskets

• Pre-formedPackinGsetsforvalves,PumPsandmixers

• flexiblemetalhoseandexPansionjoints

• sealsPecialtiesfortheoilandGasindustry



• on-sitetraininG

• equiPmentsurveysandaudits

• aPPlicationenGineerinG

• maintenanceandrePairoPtimizationProGrams



* Denotes manufacturing location

Parksville#8 - 1009 Allsbrook RoadV9P 2A9Phone: (250) 954-1543Fax: (250) 954-1591

Calgary#7 - 6320 11th Street SET2H 2L7Phone: (403) 253-0161Fax: (403) 258-0394


*Surrey7930 130th StreetV3W 0H7Phone: (604) 507-6050Fax: (604) 507-6098

british columbia

Fort St. John8910 100th St., Unit CV1J 3X1Phone: (250) 785-6222Fax: (250) 785-6211

alberta





saskatchewan

Regina707E McDonald StreetS4N 5M2Phone: (306) 584-2422Fax: (306) 584-2599

quebec nova scotia

ontario

MississaugaUnit 1A 3350 Ridgeway Dr L5L 5Z9Phone: (905) 607-6587Fax: (905) 607-6994


Prince GeorgeUnit 7, 1839 - 1st AvenueV2L 2Y8 Phone: (250) 563-1444Fax: (250) 563-2644

Thunder BayUnit B 1131 Central Avenue P7B 7C9Phone: (807) 623-0641 Fax: (807) 623-5480

FLUID CONTAINMENT AND CONTROL SPECIALISTS SINCE 1967

CANFLEX® HIGH TEMPERATURE GASKETS (THT)

• High temperature THT protects the flexible graphite from oxidation at elevated temperatures

• THT wound with flexible graphite ensures added reliability and optimum sealabilty

• Spiral Wound RWI-THT is suitable for services up to 2500# and 1500°F

• CANFLEX® Cammprofile 942AR2-THT is suitable for services up to 600# and 1500°F

Profile

High Temperature Gasket Styles

Construction

• Inhibited flexible graphite filler material

• Heat resistant THT filler material impregnated with a high quality silicone binder

• Suitable as a filler for spiral wound gaskets and as facing on cammprofile gaskets

• Windings, inner rings and outer rings are available in a wide variety of metals and specialty alloys

• Available in standard and custom configurations

CANFLEX®

High Temperature Gaskets (THT)

CANFLEX® THT Construction

Flexible Graphite

FillerTHT Filler THT Filler

Wire

Outer RingInner Ring

GASKET STYLE

CANFLEX® Spiral Wound

CANFLEX® Cammprofile

M Factor 3 4

Y Factor 10,000 2,500

IMPORTANT NOTE: Product specifications shown are typical. For specific application recommendations please consult your local A.R. Thomson Group representative. Failure to select proper sealing products could result in property damage and/or serious personal injury. A.R. Thomson Group is not liable for consequential damages resulting from misuse or implied suitability for any service. Specifications are subject to change without notice. ARTG13412

For your closest branch, please visit WWW.ARTHOMSON.COM

O2

THT Protects Graphite from Oxygen Attack

CANFLEX® Spiral Wound CANFLEX® Cammprofile

CANFLEX® CMGC

A.R. Thomson Group FLUID CONTAINMENT & CONTROL PRODUCTS

fluiD containment anD control specialists since 1967

METAL RING JOINT GASKETS

styles

materials & Dimensions

quality

Style Rstyleristheoriginalringjointgasketdesignwhichcanbeusedinmodernflangeshavingthestandardringjointflatbottomgrooveaswellasolderflangeswiththeroundbottomgroovestyle.theoctagonalversionwasintroducedtoprovideincreasedcontactarearesultinginhigherseal-ingefficiency.

Style BX & RXPressureenergizedringjointgasketswithuniqueselfsealingaction.internalpressureduringserviceincreasesloadingonthegaskettherebyimprovingthegasketsseal-ingperformance.

Gasketmetalshouldbeselectedtosuitthespecificservicecondi-tions.inadditiontothis,thematerialhardnessshouldbelowerthanthatoftheflangemetalinordertoensurethegasketdeformsundercompressionandnotthegrooveofthesealingsurface.descriptionsofcommonmaterialsandhardnessvaluesareasfollows:

A.r.thomsonGroupiscommittedtosafety,reliability,repeatability,traceabilityandtoprovidingqualityproductsandservicestoourcus-tomersthroughapolicyof“continuousimprovement.”thisisdemon-stratedbyourcommitmenttonewproductdevelopment,theintegra-tionoftechnologiesintoourmanufacturingprocesses,thedevelopmentandimplementationoftrainingprogramsforouremployees,andourcompetitivenessintheglobalmarketplace.

material designation maxhardness

rockwellb

maxhardness

brinell

softiron d 56 90

lowcarbonsteel s 68 120

4–6chrome f-5* 72 130

304stainlesssteel s304 83 160




* ASTM specification A 182-72 chemical composition requirements only

commonlyusedintheoil,petroleumandchemicalprocessin-dustries,ringjointgasketsprovideanexceptionalsealwhere

highmechanicalandthermalperformanceisrequired.ringjointgasketsaremanufacturedinavarietyofconfigurations(rx,bx,rovalandoctagonal)andmaterialsforAPiwellheadassembliesandhighpressureAsmepipingsystems.customprofilegasketsandlensringsarealsoavailableuponrequest.

thomson

Metal Ring Joint Gaskets

Important Note: Product specifications shown are typical. For specific application recommendations please consult your local A.R. Thomson Group representative. Failure to select proper sealing products could result in property damage and/or serious personal injury. A.R. Thomson Group is not liable for consequential damages resulting from misuse or implied suitability for any service. Specifications are subject to change without notice.

size Designations for oval or octagonal rings

rX Gaskets for api 6b flanges

www.arthomson.com

bX Gaskets for api 6bX flanges

* ASME B16.47 Series A

* Class 720, 960, & 2900 flanges to API 6B are obsolete. Data are for information only.** Crossover flange connection

nominal pipe size

pressure class

150 300–600 900 1 500 2 500

1/2 r-11 r-12 r-12 r-13

3/4 r-13 r-14 r-14 r-16

1 r-15 r-16 r-16 r-16 r-18

1-1/4 r-17 r-18 r-18 r-18 r-21

1-1/2 r-19 r-20 r-20 r-20 r-23

2 r-22 r-23 r-24 r-24 r-26

2-1/2 r-25 r-26 r-27 r-27 r-28

3 r-29 r-31 r-31 r-35 r-32

3-1/2 r-33 r-34

4 r-36 r-37 r-37 r-39 r-38

5 r-40 r-41 r-41 r-44 r-42

6 r-43 r-45 r-45 r-46 r-47

8 r-48 r-49 r-49 r-50 r-51

10 r-52 r-53 r-53 r-54 r-55

12 r-56 r-57 r-57 r-58 r-60

14 r-59 r-61 r-62 r-63

16 r-64 r-65 r-66 r-67

18 r-68 r-69 r-70 r-71

20 r-72 r-73 r-74 r-75

24 r-76 r-77 r-78 r-79

26* r-93 r-100

28* r-94 r-101

30* r-95 r-102

32* r-96 r-103

34* r-97 r-104

36* r-98 r-105

api ring number

pressure class

2 000 3 000 5 000 10 000 15 000 20 000

bX150 1-11/16 1-11/16

bX151 1-13/16 1-13/16 1-13/16

bX152 2-1/16 2-1/16 2-1/16

bX153 2-9/16 2-9/16 2-9/16

bX154 3-1/16 3-1/16 3-1/16

bX155 4-1/16 4-1/16 4-1/16

bX156 7-1/16 7-1/16 7-1/16

bX157 9 9 9

bX158 11 11 11

bX159 13-5/8 13-5/8 13-5/8

bX160 13-5/8

bX161 16-3/4

bX162 16-3/4 16-3/4 16-3/4

bX163 18-3/4

bX164 18-3/4 18-3/4

bX165 21-1/4

bX166 21-1/4

bX167 26-3/4

bX168 26-3/4

bX169 5-1/8

bX170 6-5/8 6-5/8

bX171 8-9/16 8-9/16

bX172 11-5/32 11-5/32

bX303 30 30

api ring number

pressure class

720, 960 & 2 500*

2 900* 3 000 5 000

rX20 1-1/2 1-1/2 1-1/2

rX23 2

rX24 2 2

rX25 3-1/8

rX26 2-1/2

rX27 2-1/2 2-1/2

rX31 3 3

rX35 3

rX37 4 4

rX39 4

rX41 5 5

rX44 5

rX45 6 6

rX46 6

rX47 8**

rX49 8 8

rX50 8

rX53 10 10

rX54 10

rX57 12 12

rX63 14

rX65 16

rX66 16

rX69 18

rX70 18

rX73 20

rX74 20

rX82 1

rX84 1-1/2

rX85 2

rX86 2-1/2

rX87 3

rX88 4

rX89 3-1/2

rX90 5

rX91 10

rX99 8** 8**

rX201 1-3/8

rX205 1-13/16

rX210 2-9/16

rX215 4-1/16

www.arthomson.com

corporate profile


• AllvArietiesofindustriAlmetAllicAndnon-metAllicGAskets

• Pre-formedPAckinGsetsforvAlves,PumPsAndmixers

• flexiblemetAlhoseAndexPAnsionjoints

• seAlsPeciAltiesfortheoilAndGAsindustry



• on-sitetrAininG

• equiPmentsurveysAndAudits

• APPlicAtionenGineerinG

• mAintenAnceAndrePAiroPtimizAtionProGrAms



*Denotes manufacturing location

Parksville#8–1009 Allsbrook Rd.V9P 2A9Phone: (250) 954-1543Fax: (250) 954-1591

Calgary#7–6320 11th Street SET2H 2L7Phone: (403) 253-0161Fax: (403) 258-0394


*Surrey7930 - 130th StreetV3W 0H7Phone: (604) 507-6050Fax: (604) 507-6098

british columbia

alberta





saskatchewan

*Regina707E McDonald StreetS4N 5M2Phone: (306) 584-2422Fax: (306) 584-2599

quebec nova scotia

ontario

MississaugaUnit 1A, 3350 Ridgeway Dr. L5L 5Z9Phone: (905) 607-6587Fax: (905) 607-6994


Prince GeorgeUnit 7, 1839 1st AvenueV2L 2Y8 Phone: (250) 563-1444Fax: (250) 563-2644

Thunder BayUnit B, 1131 Central Ave. P7B 7C9Phone: (807) 623-0641 Fax: (807) 623-5480

A.R. Thomson Group FLUID CONTAINMENT & CONTROL PRODUCTS

For your closest branch, please visit WWW.ARTHOMSON.COM Limitation of liability: A.R. Thomson Group is not liable for consequential damages resulting from misuse or implied suitability for any service. ARTG10903

• Reliable replacement for asbestos gaskets in ASME pressure vessels, pulp digesters, steam and liquor heater applications

• Excellent sealability and resistance to corrosive attack due to the incorporation of 316SS and flexible graphite

• The corrugations provide improved resilience in applications where thermocycling is a problem

• Durable metallic construction facilitates handling; easy to install

ProfileConstruction

• 316SS corrugated double-jacketed• Graphite-XF TGBL filler material• Graphite-XF TGB surface treatment• Available as ring or with partition

rib(s)

Thomson

926-S6GLiquor Heater Gaskets

CANFLEX® Heat Exchanger Gasket Configurations

canflex metallic gaskets - stecindustrial.cl€¦ · gasket identification markings required by...

Documents