TM

Canister Cleaner

Owner's Manua|

English .€, pp, 1-10

EspJ_oi ,_ pag.11=16

Frangais ,_ p. 17=22

Review this manua| befere

eperating c|eanero

www.hoover.com

Fill in and retainThe model and sedal number are located on the bottom of the cleaner.

For your personal records, please enter the COMPLETE model and sedal number inthe spaces provided and retain this information.

Your cleaner is model

and has sedal number

It is suggested that you attach your sales receipt to this owner's manual. Verification ofdate of purchase may be required for warranty service of your Hoover product.

Important Safeguards ............................ 2Assembling Cleaner .............................. 3

Carton contents .................................. 3Connect hose, wand, nozzle .............. 3

Cleaner Description ................................ 4How To Use

Canister Cleaner .............................. 4-6Powered Nozzle .................................. 4Cleaning Tools .................................... 5Cleaning Stairs .................................... 5Storage ............................................ 5,6

MaintenanceFilter bag replacement ........................ 6Cleaning filters .................................... 7Replacing power nozzle belt .......... 7-8Replacing agitator brush roll ............ 8Replacing headlight ............................ 8Lubrication .......................................... 8

Service .................................................... 9If You Have a Problem ............................ 9

Clearing Blockages ............................ 9VVarranty ................................................ 10

When using an electrical appliance, always followbasic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCEm

Im!m To reduce the risk of fire, electric shock or injury:

Do not use outdoors or on wet surfaces.Close supervision is necessary when any appliance is used by or near children.Co not allow vacuum cleaner to be used as a toy or to run unattended at anytime.Keep hair, loose clothing, fingers, feet and aH parts of body away from openings,rotating agitator and other moving parts. Co not operate cleaner in bare feet orwhen wearing open toe shoes or sandals.Do not pick up anything that is burning or smoking, such as cigarettes, matches,or hot ashes.Co not use to pick up flammable or combustible liquids such as gasoiine or finewood sandings or use in areas where they may be present.The hose contains electrical wires. Do not use if damaged, cut or punctured.Avoid picking up hard, sharp objects with the cleaner. They may damage thecleaner.Always turn off this appliance before connecting or disconnecting hose ormotorized nozzle.Crush roll may suddenly restart, unplug from electrical outlet before servicing.Do not use without filter bag in place. Change bag frequently when picking upvery fine materials such as powder.Use extra care when cleaning on stairs.Do not put any object into openings. Do not use with any opening blocked; keepfree of dust, lint, hair, or anything that may reduce air flow.Do not pull or carry by cord, use cord as a handle, close door on cord or pullcord around sharp edges or corners. Do not run appliance over cord. Keep cordaway from heated surfaces.A_ways disconnect cord from electrical outlet before servicing the cleaner.Unplug cleaner when not in use. Turn off aH controls before unplugging.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.Never handle plug or appliance with wet hands.If cleaner has a cord reel, hold on to the plug while cord is being rewound to pre-vent cord from whipping.The use of an extension cord is not recommended.Co not use with damaged cord or plug. If appliance is not working as it should,has been dropped, damaged, left outdoors, or dropped into water, take it to aHoover Factory Service Center or Authorized Hoover Warranty Service Dealer(Depot),Use vacuum cleaner only for its intended use as described in the instructions.Use only attachments recommended by The Hoover Company; others may causehazards.

tm

i®,mThis product contains chemicals known to theState of California cancer. WASH HANDS AFTER HANDMNG.

© 2004 The Hoover Companywww.hoover.com

2

This cleaner was inspected and packaged carefully before being shippedfrom the factory. If you should happen to need assistance during assemblyor operation,

Visit us online at www.hoover.com to find the service outlet nearestyou (click on the "Service" button) OR

Call 1-800-944-9200 for an automated referral of authorized service

outlet locations (U.S. only) OR

Call 1-330-499-9499 to speak with a representative in the HooverConsumer Response Center.

Carton contents

mJ

A

C

D

E

F

Unpack cleaner from carton and iden-tify the parts shown. Remove anddispose of cardboard packing.

A. Canister cleanerB. Extension wands and hoseC. Power nozzleD. Crevice toolE. Round swivel brush

F. Upholstery tool

Operate cleaner only at voltage speci-fied on data plate on bottom ofcleaner.

Connect hose, wand and nozzle

A BG

Connect hosePush the hose connector end (A) into theopening (B) on the front of the cleaner,making sure the prongs (C) on the hoseend align with the holes in the opening.When hose end is properly inserted, youwill hear a click.

To disconnect hose from the cleaner

press the button (D) on the hose con-nector and pull straight out.

Note: The flexible hose contains elec-

trical wires for connection to the

power nozzle and should not be used

if damaged. The wires should not be

seen through the outer skin.

Attach wand and powernozzlePush the end of the wand with the but-

ton (E) firmly into the hose grip (F),making sure the prongs (G) on thewand align with the holes (H) in thehose grip. When wand is properlyinserted, you will hear a click.

To remove the wand from the hose,press on the button (E) located on theend of the wand and pull straight out.

A second extension wand can beattached in the same manner.

Push the opposite end of the wand intothe power nozzle (I), aligning the prongs(J) on the power nozzle with the holes(K) in the wand. When the power nozzleis properly inserted, you will hear a click.

To remove the power nozzle, press onthe button (L) located on the power noz-zle and pull straight out.

Continued ,,,.÷ 3

Cleaner description

1516

12

10_

The assembled cleaner will look like the drawing.

Operate cleaner only at voltage specified on dataplate on bottom of cleaner.

This cleaner is intended for household use only.

1. Hand grip2, Power nozzle ON/OFF switch3, Extension wand release buttons4. Extension wands5. Round swivel brush6. Wand storage clip/tool holder7. Upholstery tool8. Power nozzle release button9. Power nozzle10. Headlight11. Rug/floor pedal12. Carrying handle13. Hose connector14. Filter bag door15. Tool lid: stores crevice tool. Pull up

on edge of lid in recessed area16. Full bag indicator17. Suction control slide switch18. ON/OFF pedal19. Cord rewind pedal: step on pedal

to rewind cord for storage. Holdplug until cord is rewound.

20. Large wheels: provide easy towingwhen cleaner is pulled over carpet,area rugs and door sills

21. Crevice tool (stores inside tool door)22. Final filter door23. Power cord24. Wand holder slot

Polarized plugTo reduce the risk of electric shock, thisappliance has a polarized plug (oneblade is wider than the other). Thisplug will fit in a polarized outlet only oneway. If the plug does not fit fully in theoutlet, reverse the plug. If it still doesnot fit, contact a qualified electrician toinstall the proper outlet. Do not changethe plug in any way.

,A m

Turning cleaner onand adjusting powerlevelAfter assembling cleaner, plug cord intoelectrical outlet. Turn cleaner ON bystepping on the ON/OFF pedal (A).

The suction control can be increased ordecreased by sliding the control (B)towards MIN or MAX.

To turn cleaner OFF, step on the pedal.

Cord rewind pedalThe cord rewind pedal (C) is oppositethe ON/OFF pedal.

Hold on to the plug while cord isbeing rewound to prevent cord fromwhipping.

P@wer n@zz|e

Handle positions

The handle has two positions when usedwith the power nozzle: upright andoperating.

To lower handle to operating position,place your foot firmly on the power noz-zle and pull handle back.

Power nozzle ON/OFFswitchThe power nozzle ON/OFF switch (A)provides power to the nozzle. Push theswitch to the "ON" position for agitatorbrush operation, and to turn the head-light on. Push the switch to the "OFF"position to stop the brushes, and to turnthe headlight off.Note: The headlight may be turned offby the power nozzle ON/OFF switch,located on the hand grip.

Floor surfaceselectionCarpet cleaningWhen using the power nozzle for carpetand rug cleaning, step on the RUG/FLOOR pedal (D) until the indicator is inthe "RUG" position. This setting providesthe suction and agitator action neces-sary to deep clean carpets.

Hard surface floorcleaningThe power nozzle can be used forcleaning hard surface floors such aswood, linoleum, vinyl, asphalt and rub-ber tile, sealed cork, concrete and ter-razzo, as well as carpet.

To set the power nozzle for hard surfacefloor cleaning, step on the RUG/FLOORpedal placing the indicator in the"FLOOR" position. This setting providessuction and no agitator action.

Cleaning toolsThe cleaning tools are convenientlystored on the cleaner.

A tool may be attached to either thehose or wand by pushing it firmly ontothe hose end or the end of the wand.

Twist tool slightly to tighten or loosen theconnection.

The cleaning tools have many uses.Select the tool best suited for the clean-

ing task from the following descriptions.

m

G

Select the proper toolE. Round swivel brush (stores onextension wand) may be used forcarved furniture, table tops, books,lamps, lighting fixtures, venetian blinds,baseboards, shutters and registers. Thehead of the brush swivels for use in

hard-to-reach spaces.

F. Upholstery tool (stores on extensionwand) may be used for upholstered fur-niture, draperies, tapestries, mattresses,

clothing, automobile interiors and car-peted stairs.

G. Crevice tool (stores inside tool lid)may be used in tight spaces, corners,and along edges in such places asdresser drawers, upholstered furniture,stairs and baseboards.

How to clean stairsClean stairs by placing cleaner on end.Clean stairs from bottom to top.

How to store cleanerThe cleaning tools are convenientlystored on the cleaner. Open the tooldoor (H), located on the cleaner body,for crevice tool (G) storage.Place the round swivel brush (E) and theupholstery tool (F) in the recessed areaon the wand storage clip/tool holder (I),located on the extension wand.

Continued ,,,.÷ 5

With the cleaner standing on end, thewand holder (J) may be inserted into theslot (K) on the bottom of the cleanerbody as shown.

Filter bagWhen to replace

Check the bag when the full bag indica-tor (A) shows red. When bag is filledwith dirt, the cleaner will not operate effi-

ciently. Discard used bag.

CAUTION: Very fine materials, suchas face powder or cornstarch mayseal the filter bag and cause it toburst even though it is only partiallyfull of dirt. When using the cleaner toremove material of this nature,change the bag often.

Where to buyFilter bags may be purchased fromAuthorized Hoover Dealers (Depots),Leading Retailers, Hoover FactoryService Centers, or through The HooverCompany online at www.hoover.com.

What to buyIn order to maintain the original cleaningeffectiveness and superior filtration qual-ities of your cleaner, use only GenuineHoover@ Allergen Filtration Type SRdisposable filter bags (package number401010SR).

To assure that your HOOVER cleaneroperates at peak performance, it isimperative that you use only genuineHOOVER filter bags distributed by TheHoover Company. HOOVER bags canbe identified by these trademarks --

How to replaceTurn cleaner off and disconnect fromelectrical outlet.Disconnect hose from the cleaner,pressing the button (B) on the hose con-nector and pulling straight out

cOpen the filter bag door by pressing onthe latch (C).

Pull up on the filter bag frame (D) andremove from bag compartment.

Press on filter bag clamp (E) to releasebag from frame.Discard used bag. Be careful not todispose of filter bag frame.

Place new filter bag behind tabs (F) onunderside of bag frame.

Return filter bag frame and filter bag tobag compartment, making sure all sidesof filter bag are within the bag compart-ment.Close the bag compartment door andreattach hose.

Do not operate cleaner without filterbag in place.

Filters - secondaryand finalHow to cleanTurn cleaner off and disconnect fromelectrical outlet.

The secondary filter (G), located at therear of the filter bag compartment, pro-tects the motor from dirt particles. If thefilter becomes dirty, lift filter out. Washfilter in warm water. Allow to air drycompletely before returning filter tocleaner.Do not operate cleaner withoutsecondary filter in place.

Turn cleaner off and disconnect fromelectrical outlet.The final filter, located on the back of

the cleaner body, aids in the filtrationprocess to return clean air to the room.To remove this filter, use thumb to openand pull down on filter door (H). Lift filterout and wash in warm water. Allow to air

dry completely before replacing filter.Return filter to the inside of the filter

door. Replace filter door by aligning tab(I) on door with slot (J) on cleaner body.Rotate door upwards, pressing to snapinto place.

Belt replacementThe belt in your power nozzle drives theagitator. It has been designed specificallyfor use in this cleaner and is important foreffective operation.

What to buy

There are other belts manufactured that

are similar in shape and size, but are notdesigned for the HOOVER DurosTM powernozzle. Such belts do not operate the agi-tator correctly and may create stresswhich could damage your power nozzle.Use only a genuine HOOVER belt pack-age no. 40201270 (part no. 59134226)when a belt replacement is necessary.

When to replaceThe belt should be checked from time to

time to be sure it is in good condition. Tocheck, remove the nozzle cover (see fol-lowing section). Replace the belt if it isstretched, cut, or broken.

How to replaceTurn cleaner off and disconnect fromelectrical outlet. Disconnect powernozzle from extension wands.

To remove hood, turn nozzle over andunscrew the 2 recessed screws.

Return nozzle to original position and liftoff hood.

Rotate headlight assembly (A) awayfrom the brush roll cover (B).

Unscrew four screws (C) located at rearof brush roll cover.

Remove two metal brackets (D).Lift off brush roll cover.

If belt (E) is not broken, but is stretchedor cut, pull it off the motor pulley (F). Liftup end of agitator brush roll (G). Removeold belt from agitator pulley and replacewith new belt. Lettering on belt must bevisible. Stretch belt back and attach to

motor pulley.

Hold opposite end of agitator brush roll inplace. Push belt end forward, pushingdown until fully seated in place. Turn agi-tator, making sure it rotates freely.

Replace brush roll cover (B) over agitatorbrush roll by aligning the two U-shapedslots in the brush roll cover (H) with thecenter screw housings (I). Press brush rollcover back into position.

Continued ,,,.÷ 7

Reposition two metal brackets (J), makingsure back of post (K) is facing toward thecenter as shown. Replace four screws.

Rotate the headlight assembly back intopositon.

Position hood on top of nozzle base.

Turn nozzle over. Replace 2 screws.

Agitator brush rollreplacementWhen to replaceTurn cleaner off and disconnect fromelectrical outlet.When agitator brush roll brushes areworn, the brush roll should be replaced.

To check condition of brushes, moveedge of a card across bottom plate whileturning brush roll. To maintain cleaningeffectiveness, replace brush roll if brush-es do not touch card.

What to buy

When purchasing a new agitator brushroll, ask for HOOVER part no. 59134225.

How to replaceTurn cleaner off and disconnect fromelectrical outlet.

1. Remove hood, headlight assembly,brush roll cover, belt and brush roll asshown in Figs. 3-10 to 3-13.2. Discard old brush roll.

3. Replace new brush roll and belt asshown in Figs. 3-14 to 3-17.

Headlight replace-mentThe headlight (A), located on top of thepower nozzle, operates when the clean-er is turned on, except when the powernozzle switch is in the OFF position. Useonly HOOVER part no. 59134219 whenreplacing the headlight.

How to replaceTurn cleaner off and disconnect fromelectrical outlet. Disconnect powernozzle from extension wands.

1. Remove the flood as shown in Fig.3-10.

A

B

2. Rotate headlight assembly (A) awayfrom the brush roll cover (B).8

3. Push old bulb into socket and twist toremove. Push new bulb into socket andtwist into place.

4. Replace the headlight assembly.

5. Position hood on top of nozzle base.

Turn nozzle over. Replace 2 screws.

LubricationThe motor is equipped with two bear-ings that contain sufficient lubrication forthe life of the motor. The addition oflubricant could cause damage.Therefore, do not add lubricant toeither motor bearing.

ServiceTo obtain approved HOOVER serviceand genuine HOOVER parts, locate thenearest Hoover Factory Service Centeror Authorized Hoover WarrantyService Dealer (Depot) by:

checking the Yellow Pages under'Vacuum Cleaners - Household" OR-

checking the list of Factory ServiceCenters provided with this cleanerOR-

checking the Service section ofThe Hoover Company online atwww.hoover.com OR -

calling 1o800o944o9200 for an auto-mated referral of authorized serviceoutlet locations (U.S. only).

Please do not send your cleaner to TheHoover Company in North Canton forservice, this wi[[ only result in delay.

If further assistance is needed, contactThe Hoover Company ConsumerResponse Center, Phone: 330-499-9499.

In Canada, contact Hoover Canada,Burlington, Ontario L7R 4A8, Phone:1-800-263-6376.

Always identify your cleaner by the com-plete model number when requestinginformation or ordering parts. (The modelnumber appears on the bottom of thecleaner.)

If a minor problem occurs, it usually canbe solved quite easily when the cause isfound by using the check list below.

Possible causePossible solution

• Not firmly plugged in.• Plug unit in firmly

• No voltage in wall plug.• Check fuse or breaker

• Blown fuse or tripped breaker.• Replace fuse/reset breaker.

Possible causePossible solution

• Filter bag full.• Replace filter bag.

• Obstruction in nozzle connector,hose or wands.

• Remove obstruction.

• Secondary filter dirty.• Clean filter with water, allow to dry and

replace in cleaner.

• Power set too low.

• Increase power setting by pushingsuction control slide switch towardMAX.

• Hose not properly connected tocleaner

• Ensure hose is properly connected.

Possible causePossible solution

• Broken or worn belt.

• Replace belt.

• RUG/FLOOR pedal set to "FLOOR".• Set rug/floor pedal to "RUG".• Power nozzle switch "OFF".

• Turn switch to "ON" position.

Possible causePossible solution

• Low cleaner suction.• See section "Cleaner suction low".

• Blockage in nozzle connector.• Remove blockage.

• Agitator brush roll not running.• See section "Agitator brush roll won't

run".

• Agitator brush roll brushes worn.• Replace brushes.

Clearing blockagesLow suction or pick up may be due to ablockage in the system. Refer to the fol-lowing steps to check for blockages,continuing with each step until theblockage is found:

1. Turn cleaner off and disconnect fromelectrical outlet; then disconnectpower nozzle plug and wands fromhand grip.

EEl

2. Plug cleaner in, turn on, and checkhose end for suction. Remove anyobstructions.

3. Remove power nozzle from wandsand attach wands to hose. Check forsuction and remove any blockages.

4. Make sure power nozzle is discon-nected from hand grip. Then check forblockage in nozzle connector (A).

Push nozzle connector down to lowest

position. Look into nozzle connector andremove any blockage.

Continued ,..÷9

Fu|i One Year

(Domestic Use)

'Four HOOVER@ appliance is warrantedin normal household use, in accordancewith the Owner's Manual against odginaldefects in matedal and workmanship fora period of one full year from date ofpurchase. This warranty provides, at nocost to you, all labor and parts to placethis appliance in correct operating con-dition during the warranted period. Thiswarranty applies when the appliance ispurchased in the United States includ-ing its territories and possessions, or inCanada or from a U. S. MilitaryExchange. Appliances purchased else-where are covered by a limited one yearwarranty which covers the cost of partsonly. This warranty does not apply if theappliance is used in a commercial orrental application.

This warranty only applies when theproduct is in use in the country orterritory in which it is purchased.

Warranty service can only be obtainedby presenting the appliance to one ofthe following authorized warranty ser-vice outlets. Proof of purchase will berequired before service is rendered.

I. Hoover Factory Service Centers.

2. Hoover Authorized WarrantyService Dealers (Depots).

For an automated referral of authoo

rized service outlets in the U.S.A.,phone 1o800o944o9200 OR

visit The Hoover Company online atwww.hoover, com

This warranty does not cover pick updelivery, or house calls; however, if youmail your appliance to a Hoover FactoryService Center for warranty service,transportation will be paid one way.

While this warranty gives you specificlegal rights, you may also have otherrights which vary from state to state.

If further assistance is needed, or ifthere are questions concerning this war-ranty or the availability of warranty ser-vice outlets, phone the HooverConsumer Response Center,1-330-499-9499.

In Canada, contact Hoover Canada,Burlington, Ontario L7R 4A8,1-800-263-6376.

10