cantorque2013 lowres

Click here to load reader

Post on 29-Mar-2016

274 views

Category:

Documents

8 download

Embed Size (px)

DESCRIPTION

http://dev.cantorque.com/images/Cantorque2013_lowres.pdf

TRANSCRIPT

  • www.C

    anTorq

    ue.com

  • Heavy duty industrial construction.

    Ergonomic and Safe.

    Totally Mechanical - No Hydraulic.

    Easy to release.

    Eliminates Striker Wrenches, Shims a Vice Grip Style Backup Wrenches.

    Stock in Standard and Metric Sizes.

    Features :

    CanTorque Backup Wrenches

    Technical Details:

    BC-19M 19 BC-46M 46 BC-012 3/4 BC-200 2

    BC-22M 22 BC-50M 50 BC-014 7/8 BC-203 2.3/16

    BC-24M 24 BC-55M 55 BC-100 1 BC-206 2.3/8

    BC-27M 27 BC-60M 60 BC-102 1.1/8 BC-209 2.9/16

    BC-30M 30 BC-65M 65 BC-104 1.1/4 BC-212 2.3/4

    BC-32M 32 BC-70M 70 BC-107 1.7/16 BC-215 2.15/16

    BC-36M 36 BC-75M 75 BC-1 10 1.5/8 BC-302 3.1/8

    BC-41M 41 BC-80M 80 BC-1 13 1.13/16

    Metric Sizes Standard Sizes

    Part No.Part No.Part No. Part No. inch inchmmmm

    CTBW -1 Wrench Handle

    4 .....................CT Series

    8 ......................RT Series

    13 ....................Pumps

    15 ....................Vortex Series

    16 ....................Tensioners

    23 ....................CT Wave

    24 ....................CTBW Series

    25 ....................CTC Series

    26 ....................Multipliers

    30 ....................Power Nut Splitters

    32 ....................Equalizer

    table of contents

    8

    F

    15

    D

    AB

    CS WING

    D

    E

    Features :Sa fe : No sparks . No ames . No risk to volatile surroundings. No hammers or impact needed. No ying fragments.Fast : Cuts a 3 nut in 20 to 30 seconds vs. approx. 20 minites with a hammer & chisel or torch.Easy Set up : You can be up and away in less than 5 minites.No Damage to bolt or stud threads by calibrating the chisel so that only the nut is cut.Versatile : Power splitters cut the hardest nuts. The range of models offered and the range of each model compares very favorablyvs. the competition.

    PS-105 11 - 22 16 - 36 38 271 60 10 38 105 10.65 23.40PS-200 22 - 32 7/8 - 1.1/4 36 - 51 1.7/16 - 2 38 287 45 13 54 108 11.25 24.80PS-204 32 - 38 1.1/4 - 1.1/2 46 - 60 1.13/16 - 2.3/8 57 385 30 14 64 164 35.65 78.40PS-210 35 - 45 1.3/8 - 1.3/4 57 - 70 2.1/4 - 2.3/4 57 398 30 18 73 164 36.55 80.40PS-308 45 - 57 1.3/4 - 2.1/4 70 - 89 2.3/4 - 3.1/2 78 460 30 19 99 214 75.15 165.30PS-314 50 - 64 2 - 2.1/2 79 - 98 3.1/8 - 3.7/8 80 488 30 22 108 214 82.00 180.40PS-404 64 - 70 2.1/2 - 2.3/4 95 - 108 3.3/4 - 4.1/4 95 579 60 29 118 251 106.00 233.30PS-500 76 - 83 3 - 3.1/4 114 - 127 4.1/2 - 5 105 590 60 29 137 251 110.50 243.10P S -506 83 - 8 9 3.1/4 - 3 .1/2 124 - 1 36 4.7/8 - 5 .3/8 105 598 60 29 149 251 108.45 238.60

    7/16 - 7/8 5/8 - 1.7/16

    ModelNo.

    WeightA B C D E FStudDiameter

    mm mm mmmm mmmm mminch inch kg lbs

    Nut A /FAcrossTheFlats

    Power Splitter

    ModelNo.

    WeightA B C D E FStudDiameter

    mm mm mm mm mm mm mminch inch kg lbs

    Nut A /FAcrossTheFlats

    Power Splitter Angle Headed

    PS-100AH 11 - 16 7/16 - 5/8 13 - 24 1/2 - 1 17.5 190 30 6 65 72 4.40 9.70PS-105AH 11 - 22 7/16 - 7/8 16 - 36 5/8 - 1.7/16 38 280 60 10 70 105 12.65 27.80PS-200AH 22 - 32 7/8 - 1.1/4 36 - 51 1.7/16 - 2 38 290 45 13 95 108 13.65 30.00PS-204AH 32 - 38 1.1/4 - 1.1/2 46 - 60 1.13/16 - 2.3/8 57 410 30 15 108 164 38.10 83.80PS-210AH 35 - 45 1.3/8 - 1.3/4 57 - 70 2.1/4 - 2.3/4 57 420 30 18 130 164 39.40 86.70PS-308AH 45 - 57 1.3/4 - 2.1/4 70 - 89 2.3/4 - 3.1/2 78 500 30 20 160 214 78.65 173.00PS-314AH 50 - 64 2 - 2.1/2 79 - 98 3.1/8 - 3.7/8 80 510 30 23 175 214 92.15 202.70

    For Removing Frozen Nuts the Right Way

    Power SplitterModel - PS-105toModel - PS-506

    Power Splitter Angle HeadedModel - PS-100AHtoModel - PS-314AH

    For removingfrozen nutsthe right way.Other anglesplittersizes quoted onrequest.

    F

    A

    S WING

    B

    C

    E

    D

    Power Splitters

  • www.cantorque.com 3 www.cantorque.com www.cantorque.com

    Thank you for considering CanTorque as your bolting equipment partner. Headquartered in edmonton with representatives and partners across Canada and around the world, we are never more than a call or click away.

    Since opening in 2000 we have continually expanded our product offering, range of services and most importantly, our expertise. 2012 marked the latest chapter in our evolution as we capital-ized on lessons learned through many years of distribution to be-come Canadas fi rst dedicated provider of a complete bolting tool range CanTorque Industrial Bolting Tools. Hydraulic, pneumatic and mechanical torque tools, stud-tensioning systems, ultra-sonic stud measurement systems we can supply whatever your project requires.

    Our inventory of products is unrivaled, as is our experience and commitment to our customers. We will always put your needs based on your job-specifi c requirements fi rst. We have made it our corporate mission to identify, prevent and solve any problem related to any bolted connection.

    Dive into the pages of our catalogue and youll fi nd no smoke, mirrors or any of the gimmicks that have become commonplace in our industry.

    Simply put, you can rely on CanTorque for world-class tools, a massive inventory and industry-leading customer service. Thats what makes us Canadas premier equipment provider.

    We look forward to being of service.

    Colin Livingston-PresidentCanTorque Inc.edmonton, aB Canada

  • 4 www.cantorque.com

    CanTorque Series Specifi cations

    Always up For A Challenge Housing CNC machined from aircraft Grade aluminum

    every tool individually calibrated and certifi ed

    Positive engagement ratchet will never lock up

    extremely simple and effi cient design

    High torque to weight ratio

    Multi-position reaction armTechnicalModel No. CT-2 CT-3 CT-5 CT-7 CT-11 CT-20 CT-27 CT-60

    Square Drive 3/4 1 1 1/2 1 1/2 1 1/2 2 1/2 2 1/2 2 1/2

    Min. Torque Lbf/ft 127 330 534 740 1,100 2,220 2,720 5,800

    Max. Torque Lbf/ft 1,270 3,330 5,340 7,400 11,010 22,200 27,200 58,000

    Output Accuracy +/-3% +/-3% +/-3% +/-3% +/-3% +/-3% +/-3% +/-3%

    Repeatability 100% 100% 100% 100% 100% 100% 100% 100%

    Duty Cycle 100% 100% 100% 100% 100% 100% 100% 100%

    Tool Weight Lbs/(Kgs) 4.00/(1.85) 9.30/ (4.20) 18.60/(8.40) 19.60/(8.90) 30.00/(13.60) 62.70/(28.5) 72.20/(32.75) 134.00/(60.80)

    Dimensions CT-2 CT-3 CT-5 CT-7 CT-11 CT-20 CT-27 CT-60Model No. mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch

    Height 105.00 4.13 131.00 5.15 161.60 6.36 175.90 6.92 198.20 7.80 235.50 9.27 259.70 10.22 295.00 11.61

    Length 1 121.00 4.76 157.00 6.18 181.58 7.15 205.00 8.07 240.00 9.44 240.20 9.45 318.30 12.53 393.30 15.48

    Length 2 160.00 6.29 207.7 8.17 251.76 9.91 276.00 10.86 313.33 12.33 410.10 16.14 415.70 16.36 521.00 20.51

    Radius 25.00 0.98 33.00 1.30 41.27 1.62 43.25 1.70 49.70 1.95 59.20 2.33 61.90 2.43 73.80 2.90

    Width 1 51.20 2.01 68.50 2.70 79.40 3.13 93.50 3.68 99.90 3.93 124.20 4.88 133.80 5.26 167.50 6.60

    Width 2 71.60 2.81 94.70 3.72 111.20 4.38 130.40 5.13 139.00 5.47 182.10 7.16 198.00 7.79 227.00 8.93

    Width 3 108.00 4.25 148.70 5.85 175.10 6.89 202.00 7.95 222.50 8.75 279.00 11.0 297.00 11.70 370.00 14.56

    Note : All tool weights include Couplers, Swivels, Reaction Arm and Internal Oil.

    Technical

  • www.cantorque.com 5

    CT Series Accessories

    In line Reaction Pad Direct Allen Hex Drive Adapter Tool Height Length Width Ext.ModelCT-2 3.55 1.65 1.13 0.83CT-3 4.50 2.15 1.52 1.09CT-5 5.10 2.45 1.85 1.33CT-7 6.25 2.90 2.05 1.65CT-11 6.85 3.26 2.24 1.96CT-20 9.05 4.13 3.14 3.00CT-27 8.85 4.33 2.30 2.75CT-60 10.62 5.51 4.00 3.54

    Tool Direct Allen Model Hex Drive Adaptor Model CT-2 ACT-2-11 (Specify A/F Size) CT-3 ACT-3-11 (Specify A/F Size) CT-5 ACT-5-11 (Specify A/F Size) CT-7 ACT-7-11 (Specify A/F Size) CT-11 ACT-11-11 (Specify A/F Size) CT-20 ACT-20-11 (Specify A/F Size) CT-27 ACT-27-11 (Specify A/F Size) CT-60 ACT-60-11 (Specify A/F Size)

    Extended Reaction Tube Tool Extended Dia. Length Model Reaction Tube Model CT-2 ACT-2-03-ERT 2.00 18.57 CT-3 ACT-3-03-ERT 2.63 23.75 CT-5 ACT-5-03-ERT 3.00 22.50 CT-7 ACT-7-03-ERT 3.50 23.00 CT-11 ACT-11-03-ERT 3.75 25.13 CT-20 ACT-20-03-ERT 4.00 21.65 CT-27 ACT-27-03-ERT 5.00 16.50 CT-60 ACT-60-03-ERT 6.00 14.00

    Extension Boot Part No. Ext. Length Width ACT2-03-EXT1 1.00 1.520 1.00 ACT2-03-EXT2 2.00 ACT2-03-EXT3 3.00 ACT3-03-EXT1 1.00 2.000 1.25 ACT3-03-EXT2 2.00 ACT3-03-EXT3 3.00 ACT5-03-EXT1 1.00 2.741 2.00 ACT5-03-EXT2 2.00 ACT5-03-EXT3 3.00 ACT7-03-EXT1 1.00 2.741 1.75 ACT7-03-EXT2 2.00 ACT7-03-EXT3 3.00 ACT11-03-EXT1 1.00 3.000 2.00 ACT11-03-EXT2 2.00 ACT11-03-EXT3 3.00 ACT20-03-EXT1 1.00 4.17 2.50 ACT20-03-EXT2 2.00 ACT20-03-EXT3 3.00 ACT27-03-EXT1 1.00 4.000 2.50 ACT27-03-EXT2 2.00 ACT27-03-EXT3 3.00 ACT60-03-EXT1 1.00 5.11 3.50 ACT60-03-EXT2 2.00 ACT60-03-EXT3 3.00

    All Dimensions are in inches.

    All Dimensions are in inches.

    All Dimensions are in inches.

    Non Push Thru Square Drive Tool Non Push Thru Model Square Drive Model CT-2 ACT-2-NCT CT-3 ACT-3-NCT CT-5 ACT-5-NCT CT-7 ACT-7-NCT CT-11 ACT-11-CT CT-20 ACT-20-CT CT-27 ACT-27-CT CT-60 ACT-60-CT

    Direct Socket Drive Tool Model Direct Socket Drive Model CT-2 ACT-2-DS CT-3 ACT-3-DS CT-5 ACT-5-DS CT-7 ACT-7-DS CT-11 ACT-11-DS CT-20 ACT-20-DS CT-27 ACT-27-DS CT-60 ACT-60-DS

    End Cap Protector Tool Model End Cap Protector Model CT-2 CT-2-EC CT-3 CT-3-EC CT-5 CT-5-EC CT-7 CT-7-EC CT-11 CT-11-EC CT-20 CT-20-EC CT-27 CT-27-EC CT-60 CT-60-EC

    EXT.

    WIDTH.

    HEIgHTLENgTH

    LENgTH

    DIA.

    LENgTH

    WIDTH

    EXTENSIoN

    Reaction Armwith 1 Boot

    Reaction Armwith 2 Boot

    Reaction Armwith 3 Boot

    StandardReaction Arm

    Wide BootReaction Arm

    one PieceSolid ExtendedReaction Arm

    Types of Reaction Arms

  • 6 www.cantorque.com

    CT Series Features

    The Multi-Faceted CT Series is the preferred tool of choice on applications in every industry. From Petrochemical Plants, Steel Plants, Offshore Platforms and the Windmill Industry, the CT series is the most versatile tool that outperforms all the others!

    CT-7 Torques the Nutin Seconds! CT-3 In use during a super critical

    application in the Power Industry.

    Mono Body Housing:Highest quality aircraft grade 7075 Aluminumhousing for unrivalled strength.

    Multi Tooth Ratchet Assembly:Highest strength teeth ensures maximum stroke with greatest accuracy.

    Square Drive:Fixed Square Drive-Maximum Strength that ensures proper tool engagement and easily switches from loosen to tighten.

    Laser Engraved Torque Chart: Laser engraved shroud for quick Torque Chart reference.

    Piston Assembly:Smooth leak proof functioning of enclosedalloy steel piston provides required torque.Uses a single seal for maximum maintenancefree operation.

    Boot:Replaceable pad allowing on site change over.Protects costly replacement of reaction arm.

    Reaction Arm:Long Length Reaction Arm allows multipositioning. Allows taking reaction on mostapplications.

    360 Swivels:Dual 360 Swivel allows free 360 individualmovement of duplex hoses across all applications.

    Non-drip Quick Connect Couplers:4:1 safety ratio couplers. Assure safe operation with ease for engaging and disengaging of hoses.

    Anti Backlash Mechanism:Allows hands free working.

    Drive Plate:Single piece high strength alloy drive plate formaximum life. Allows small nose radius for the tool.

    Direct Housing Reaction:Allows use without reaction arm

    Reaction Arm Release Button:Housed within the reaction arm.

    Drive Segment:Multi Tooth Engagement provides maximum surface area to distribute torque load and ensures the tool will never lock up.

  • www.cantorque.com 7

    CT Series Torque Conversion Chart

    PSI-Lbf/ftPSI CT-2 CT-3 CT-5 CT-7 CT-11 CT-20 CT-27 CT-60 Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft

    1,000 127 330 534 740 1,090 2,220 2,720 5,943 1,200 152 395 643 888 1,308 2,677 3,264 7,132 1,400 178 460 745 1,036 1,526 3,102 3,808 8,320 1,600 203 525 855 1,185 1,745 3,559 4,352 9,509 1,800 229 590 957 1,332 1,962 3,983 4,896 10,697 2,000 255 655 1,067 1,470 2,210 4,441 5,440 11,662 2,200 279 722 1,177 1,617 2,430 4,898 5,984 12,828 2,400 305 789 1,279 1,765 2,652 5,322 6,528 13,994 2,600 330 856 1,388 1,911 2,873 5,779 7,072 15,161 2,800 356 923 1,490 2,058 3,095 6,204 7,616 16,327 3,000 380 990 1,600 2,210 3,340 6,661 8,160 17,387 3,200 406 1,058 1,710 3,560 3,560 7,118 8,704 18,546 3,400 432 1,126 1,812 2,505 3,785 7,542 9,248 19,705 3,600 457 1,194 1,922 2,652 4,005 7,999 9,792 20,864 3,800 483 1,262 2,024 2,800 4,230 8,424 10,336 22,024 4,000 510 1,330 2,118 2,960 4,400 8,881 10,880 23,2864,200 533 1,397 2,244 3,108 4,620 9,338 11,424 24,4504,400 559 1,464 2,346 3,256 4,840 9,763 11,968 25,6154,600 584 1,531 2,456 3,405 5,060 10,220 12,512 26,7794,800 609 1,598 2,558 3,552 5,280 10,644 13,056 27,9435,000 635 1,665 2,667 3,716 5,500 11,101 13,600 29,3225,200 660 1,732 2,777 3,865 5,720 11,558 14,144 30,4955,400 686 1,799 2,879 4,013 5,940 11,983 14,688 31,6685,600 711 1,856 2,989 4,162 6,160 12,440 15,232 32,8415,800 737 1,933 3,092 4,311 6,380 12,684 15,776 34,0146,000 760 2,000 3,201 4,440 6,620 13,322 16,320 34,6966,200 787 2,065 3,311 4,588 6,838 13,779 16,864 36,1356,400 813 2,130 3,413 4,736 7,060 14,203 17,408 37,3006,600 838 2,195 3,523 4,884 7,280 14,660 17,952 38,4666,800 864 2,260 3,625 5,032 7,500 15,085 18,496 39,6327,000 890 2,325 3,735 5,180 7,710 15,542 19,040 40,9147,200 914 2,398 3,845 5,328 7,927 15,999 19,584 42,0837,400 940 2,461 3,946 5,476 8,147 16,423 20,128 43,2527,600 965 2,529 4,057 5,625 8,368 16,880 20,672 44,4217,800 991 2,597 4,159 5,772 8,588 17,305 21,216 45,5908,000 1,015 2,665 4,269 5,920 8,820 17,762 21,760 46,8598,200 1,041 2,731 4,378 6,068 9,045 18,219 22,304 48,0308,400 1,067 2,797 4,480 6,216 9,265 18,644 22,848 49,2028,600 1,092 2,863 4,590 6,365 9,485 19,101 23,392 50,3738,800 1,118 2,929 4,692 6,512 9,705 19,525 23,936 51,5459,000 1,145 2,995 4,802 6,660 9,930 19,982 24,480 52,7999,200 1,168 3,062 4,912 6,808 10,148 20,439 25,024 53,9729,400 1,194 3,129 5,014 6,956 10,368 20,864 25,568 55,1469,600 1,219 3,196 5,124 7,105 10,588 21,321 26,112 56,3199,800 1,245 3,263 5,226 7,252 10,810 21,745 26,656 57,49210,000 1,270 3,330 5,340 7,400 11,010 22,220 27,200 59,401

    *All values approximate and can fluctuate with actual tool, please refer to Calibration Certificate for actual values

  • 8 www.cantorque.com

    Razor Torque Series Specifi cations

    Razor Torque - When Your Need That Extra Edge!

    TechnicalModel No. RT-1 RT-2 RT-4 RT-8 RT-16 RT-32 RT-45

    Tool Hex from 13mm / 1/2 19mm / 3/4 25mm / 1 50mm / 1 7/8 65mm / 2 5/8 80mm / 3 1/8 80mm / 3 1/8

    to 41mm / 1 5/8 60mm / 2 3/8 80mm / 3 1/8 105mm / 4 115mm / 4 5/8 155mm / 6 1/8 165mm / 6 1/2

    Min. Torque Lbf/ft 45 192 395 830 1,560 3,220 4,865

    Max. Torque Lbf/ft 560 1,928 3,950 8,630 16,600 35,650 47,380

    Output Accuracy +/-3% +/- 3% +/- 3% +/- 3% +/- 3% +/- 3% +/- 3%

    Repeatability 100% 100% 100% 100% 100% 100% 100%

    Duty Cycle 100% 100% 100% 100% 100% 100% 100%

    Corrosion Protection Standard

    Cylinder Weight Lbs/kgs 1 / 0.50 3.80 / 1.73 6.50 / 2.97 12.80 / 5.79 16.50 / 7.48 26.90 / 12.17 30.20 / 13.70

    Link Weight from Lbs/kgs 1 / 0.50 2.50 / 1.14 5.70 / 2.57 12.50 / 5.68 21.70 / 9.85 30.40 / 13.80 29.00 / 13.18

    to Lbs / kgs 1 / 0.50 3.70 / 1.66 8.00 / 3.62 15.20 / 6.91 28.60 / 13.00 40.30 / 18.30 39.50 / 17.95

    DimensionsModel No. RT-1 RT-2 RT-4 RT-8 RT-16 RT-32 RT-45 mm inch mm inch mm inch mm inch mm inch mm inch mm inch

    Length 111.00 4.37 147.00 5.78 203.20 8.00 253.00 9.96 330.00 13.00 390.00 15.35 450.00 17.71

    Height 82.60 3.25 103.00 4.05 144.00 5.66 179.50 7.06 193.80 7.63 278.00 10.94 278.00 10.94

    Width 19.90 0.78 38.00 1.49 50.70 1.99 59.50 2.34 65.00 2.56 84.00 3.30 123.80 4.87

    Radius 5.80 0.23 9.30 0.36 11.85 0.46 13.90 0.54 16.80 0.66 23.75 0.94 23.75 0.94

    Razor Torque - When Your Need That Extra Edge!

  • www.cantorque.com 9

    RT Series Accessories

    Low Point Reaction Arm

    Extended Reaction Arm

    Tool Low Point Length Width Height 1 Height 2 Model Reaction Arm Model RT-1 RT-1 RP 2.73 0.65 0.90 1.96 RT-2 RT-2 RP 4.35 1.03 1.49 3.26 RT-4 RT-4 RP 5.65 1.23 2.02 4.23 RT-8 RT-8 RP 7.15 1.78 2.53 5.35 RT-16 RT-16 RP 9.05 2.51 3.04 6.36 RT-32 RT-32 RP 11.20 3.26 3.95 8.30 RT-45 RT-45 RP 11.20 3.26 3.95 8.30

    Hex To Square Drive Adaptor Tool Hex To Square Drive Model Adaptor Model RT-1 AHS1 RT-2 AHS2 RT-4 AHS4 RT-8 AHS8 RT-16 AHS16 RT-32 AHS32 RT-45 AHS45

    SpecifyA/FsizeandSquare size when ordering.

    Hex ReducerIndicateOutsideA/F,InsideA/F when ordering.

    Tool Hex Reducer Model Model RT-1 HR-1-#-# RT-2 HR-2-#-# RT-4 HR-4-#-# RT-8 HR-8-#-# RT-16 HR-16-#-# RT-32 HR-32-#-# RT-45 HR-45-#-##-InsideandoutsideA/FofHex Reducer to be specied.

    Stack Socket Tool Extended Length Height Width Model Reaction Arm Model RT-1 RT-1-EXT 13.5 1.25 1.25 RT-2 RT-2-EXT 19.80 1.54 1.90 RT-4 RT-4-EXT 20.29 2.05 2.40 RT-8 RT-8-EXT 20.85 2.52 3.03 RT-16 RT-16-EXT 21.50 3.04 3.65 RT-32 RT-32-EXT 22.28 3.95 4.52 RT-45 RT-45-EXT 22.28 3.95 4.52

    AllDimensionsareininches.

  • 10 www.cantorque.com

    RT Series Features

    RT Low Profile - The Perfect Solution for Tight Applications!

    RT-2 Speedy torquing!

    High Strength Body:Cylinder and Link Body are manufactured from high grade, high strength alloy.

    Round Design Cylinder: Simple cylinder design for maximum efficiency and longest term operation.

    360 Swivels:Dual 360 Swivel allows free 360 individualmovement of duplex hoses across allapplications.

    Non-drip Quick Connect Couplers:4:1 safety ratio couplers. Assures safe operation with ease for engaging and disengaging of hoses.

    Link Pin:One simple pin for cassette link to cylinderengagement without using any additional orspecial tools.

    Drive Plate:Single piece high strength alloy drive plate formaximum life. Allows small nose radius for thetool.

    Multi Tooth Rachet Assembly:Highest strength teeth ensures maximum stroke with greatest accuracy.

    Never Lock Drive Segment:Never lock drive segment does not let thewrench lock and thus eliminates therequirement of a ratchet release mechanism.

    In-line Reaction Pad:This ensures torsion free reaction during use.

    Sliders:Reduce friction and prevent wear on thepiston.

    Alignment Pins:Ensure equal load distribution between the 2 side plates.

    Piston Seals:High temperature Polyurethane seals ensureyears of maintenance free operation.

  • www.cantorque.com 11

    RT Hex Cartridge Sizing Info

    RT-1 Link Hex RT-2 Link Hex RT-4 Link Hex RT-8 Link Hex RT-16 Link Hex RT-32 Link HexNumber Size Number Size Number Size Number Size Number Size Number Size

    RT-1HC008 1/2 RT-2HC012 3/4 RT-4HC100 1 RT-8HC114 1 7/8 RT-16HC210 2 5/8 RT-32HC302 3 1/8RT-1HC009 9/16 RT-2HC013 13/16 RT-4HC101 1 1/16 RT-8HC115 1 15/16 RT-16HC211 2 11/16 RT-32HC303 3 3/16RT-1HC010 5/8 RT-2HC014 7/8 RT-4HC102 1 1/8 RT-8HC200 2 RT-16HC212 2 3/4 RT-32HC304 3 1/4RT-1HC011 11/16 RT-2HC015 15/16 RT-4HC103 1 3/16 RT-8HC201 2 1/16 RT-16HC213 2 13/16 RT-32HC305 3 5/16RT-1HC012 3/4 RT-2HC100 1 RT-4HC104 1 1/4 RT-8HC202 2 1/8 RT-16HC214 2 7/8 RT-32HC306 3 3/8RT-1HC013 13/16 RT-2HC101 1 1/16 RT-4HC105 1 5/16 RT-8HC203 2 3/16 RT-16HC215 2 15/16 RT-32HC307 3 7/16RT-1HC014 7/8 RT-2HC102 1 1/8 RT-4HC106 1 3/8 RT-8HC204 2 1/4 RT-16HC300 3 RT-32HC308 3 1/2RT-1HC015 15/16 RT-2HC103 1 3/16 RT-4HC107 1 7/16 RT-8HC205 2 5/16 RT-16HC301 3 1/16 RT-32HC309 3 9/16RT-1HC100 1 RT-2HC104 1 1/4 RT-4HC108 1 1/2 RT-8HC206 2 3/8 RT-16HC302 3 1/8 RT-32HC310 3 5/8RT-1HC101 1 1/16 RT-2HC105 1 5/16 RT-4HC109 1 9/16 RT-8HC207 2 7/16 RT-16HC303 3 3/16 RT-32HC311 3 11/16RT-1HC102 1 1/8 RT-2HC106 1 3/8 RT-4HC110 1 5/8 RT-8HC208 2 1/2 RT-16HC304 3 1/4 RT-32HC312 3 3/4RT-1HC103 1 3/16 RT-2HC107 1 7/16 RT-4HC111 1 11/16 RT-8HC209 2 9/16 RT-16HC305 3 5/16 RT-32HC313 3 13/16RT-1HC104 1 1/4 RT-2HC108 1 1/2 RT-4HC112 1 3/4 RT-8HC210 2 5/8 RT-16HC306 3 3/8 RT-32HC314 3 7/8RT-1HC105 1 5/16 RT-2HC109 1 9/16 RT-4HC113 1 13/16 RT-8HC211 2 11/16 RT-16HC307 3 7/16 RT-32HC315 3 15/16RT-1HC106 1 3/8 RT-2HC110 1 5/8 RT-4HC114 1 7/8 RT-8HC212 2 3/4 RT-16HC308 3 1/2 RT-32HC400 4RT-1HC107 1 7/16 RT-2HC111 1 11/16 RT-4HC115 1 15/16 RT-8HC213 2 13/16 RT-16HC309 3 9/16 RT-32HC401 4 1/16RT-1HC108 1 1/2 RT-2HC112 1 3/4 RT-4HC200 2 RT-8HC214 2 7/8 RT-16HC310 3 5/8 RT-32HC402 4 1/8RT-1HC109 1 9/16 RT-2HC113 1 13/16 RT-4HC201 2 1/16 RT-8HC215 2 15/16 RT-16HC311 3 11/16 RT-32HC403 4 3/16RT-1HC110 1 5/8 RT-2HC114 1 7/8 RT-4HC202 2 1/8 RT-8HC300 3 RT-16HC312 3 3/4 RT-32HC404 4 1/4 RT-2HC115 1 15/16 RT-4HC203 2 3/16 RT-8HC301 3 1/16 RT-16HC313 3 13/16 RT-32HC405 4 5/16 RT-2HC200 2 RT-4HC204 2 1/4 RT-8HC302 3 1/8 RT-16HC314 3 7/8 RT-32HC406 4 3/8 RT-2HC201 2 1/16 RT-4HC205 2 5/16 RT-8HC303 3 3/16 RT-16HC315 3 15/16 RT-32HC407 4 7/16 RT-2HC202 2 1/8 RT-4HC206 2 3/8 RT-8HC304 3 1/4 RT-16HC400 4 RT-32HC408 4 1/2 RT-2HC203 2 3/16 RT-4HC207 2 7/16 RT-8HC305 3 5/16 RT-16HC401 4 1/16 RT-32HC409 4 9/16 RT-2HC204 2 1/4 RT-4HC208 2 1/2 RT-8HC306 3 3/8 RT-16HC402 4 1/8 RT-32HC410 4 5/8 RT-2HC205 2 5/16 RT-4HC209 2 9/16 RT-8HC307 3 7/16 RT-16HC403 4 3/16 RT-32HC411 4 11/16 RT-2HC206 2 3/8 RT-4HC210 2 5/8 RT-8HC308 3 1/2 RT-16HC404 4 1/4 RT-32HC412 4 3/4 RT-4HC211 2 11/16 RT-8HC309 3 9/16 RT-16HC405 4 5/16 RT-32HC413 4 13/16 RT-4HC212 2 3/4 RT-8HC310 3 5/8 RT-16HC406 4 3/8 RT-32HC414 4 7/8 RT-4HC213 2 13/16 RT-8HC311 3 11/16 RT-16HC407 4 7/16 RT-32HC415 4 15/16 RT-4HC214 2 7/8 RT-8HC312 3 3/4 RT-16HC408 4 1/2 RT-32HC500 5 RT-4HC215 2 15/16 RT-8HC313 3 13/16 RT-16HC409 4 9/16 RT-32HC501 5 1/16 RT-4HC300 3 RT-8HC314 3 7/8 RT-16HC410 4 5/8 RT-32HC502 5 1/8 RT-4HC301 3 1/16 RT-8HC315 3 15/16 RT-32HC503 5 3/16 RT-4HC302 3 1/8 RT-8HC400 4 RT-32HC504 5 1/4 RT-32HC505 5 5/16 RT-32HC506 5 3/8 RT-32HC507 5 7/16 RT-32HC508 5 1/2 RT-32RL509 5 9/16 RT-32RL510 5 5/8 RT-32RL511 5 11/16 RT-32RL512 5 3/4 RT-32RL513 5 13/16 RT-32RL514 5 7/8 RT-32RL515 5 15/16 RT-32RL600 6 RT-32RL601 6 1/16 RT-32RL602 6 1/8

    All RT series links are available in MM sizes also. Consult CanTorque for part numbers.

    Change size by removing single link pin

  • 12 www.cantorque.com

    RT Series Torque Conversion Chart

    PSI-Lbf/ft RT-1 RT-2 RT-4 RT-8 RT-16 RT-32 RT-45Hex 1/2 1 3/16 3/4 1 7/8 All Hex All Hex 2 5/8 4 2 7/16 4 11/16 2 7/16 4 11/16Sizes to to to to Sizes Sizes to to to to to to 1 1/8 1 5/8 1 13/16 2 3/8 3 15/16 4 5/8 4 5/8 6 1/2 4 5/8 6 1/2 17 to 30 to 19 to 47 to All Hex All Hex 65 to 105 to 80 to 115 to 80 to 115 to 27mm 41mm 46mm 60mm Sizes Sizes 100mm 115mm 115mm 155mm 115mm 155mm

    PSI Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft Lbf/ft

    1,000 49 66 192 210 395 830 1,560 1,660 3,190 3,700 4,685 4,8521,200 58 77 230 252 475 1,001 1,870 1,992 3,880 4,440 5,415 5,7791,400 66 87 269 294 555 1,173 2,180 2,324 4,570 5,180 6,145 6,7061,600 75 97 307 336 630 1,344 2,495 2,656 5,260 5,920 6,875 7,6331,800 84 108 346 378 710 1,516 2,805 2,988 5,950 6,660 7,605 8,5602,000 93 118 385 420 790 1,688 3,120 3,320 6,636 7,400 8,338 9,4852,200 102 130 422 462 870 1,865 3,430 3,652 7,282 8,140 9,180 10,4402,400 110 140 461 504 950 2,042 3,740 3,984 7,928 8,880 10,022 11,3952,600 118 152 500 546 1,025 2,219 4,050 4,316 8,574 9,620 10,864 12,3502,800 126 162 537 588 1,105 2,396 4,365 4,648 9,220 10,360 11,706 13,3053,000 135 173 578 640 1,185 2,574 4,675 4,980 9,866 11,100 12,548 14,2603,200 145 186 614 681 1,265 2,775 4,990 3,560 10,512 11,840 13,422 15,2023,400 153 198 653 724 1,345 2,976 5,300 5,644 11,158 12,580 14,296 16,1443,600 163 210 691 766 1,420 3,177 5,610 5,976 11,804 13,320 15,170 17,0863,800 172 221 730 809 1,500 3,378 5,925 6,308 12,450 14,060 16,044 18,0284,000 181 234 771 855 1,580 3,580 6,235 6,650 13,201 14,800 16,921 18,9704,200 191 246 806 894 1,660 3,735 6,550 6,983 13,861 15,540 17,762 19,9144,400 200 257 845 937 1,740 3,891 6,860 7,315 14,521 16,280 18,603 20,8584,600 209 270 883 980 1,815 4,046 7,170 7,648 15,181 17,020 19,444 21,8024,800 218 281 922 1,022 1,895 4,202 7,485 7,980 15,841 17,760 20,285 22,7465,000 227 292 964 1,070 1,975 4,358 7,795 8,360 16,500 18,500 21,130 23,6905,200 236 304 998 1,112 2,055 4,538 8,105 8,694 17,163 19,240 21,978 24,6375,400 244 314 1,037 1,155 2,135 4,718 8,420 9,029 17,826 19,980 22,826 25,5845,600 254 326 1,075 1,198 2,210 4,898 8,730 9,363 18,489 20,720 23,674 26,5315,800 262 336 1,114 1,241 2,290 5,078 9,045 9,698 19,152 21,460 24,522 27,4786,000 271 348 1,156 1,285 2,370 5,258 9,355 10,100 19,815 22,200 25,372 28,4256,200 280 360 1,190 1,327 2,450 5,410 9,665 10,437 20,448 22,940 26,192 29,3786,400 289 371 1,229 1,370 2,530 5,562 9,975 10,773 21,081 23,680 27,012 30,3316,600 298 384 1,267 1,412 2,605 5,715 10,290 11,110 21,714 24,420 27,832 31,2846,800 307 395 1,305 1,455 2,685 5,867 10,600 11,447 22,470 25,160 28,652 32,2377,000 316 406 1,349 1,500 2,765 6,020 10,915 11,720 22,981 25,900 29,475 33,1907,200 325 418 1,382 1,541 2,845 6,186 11,225 12,055 23,638 26,640 30,328 34,1437,400 333 429 1,421 1,583 2,925 6,352 11,535 12,390 24,295 27,380 31,181 35,0967,600 343 441 1,460 1,626 3,000 6,519 11,850 12,725 24,952 28,120 32,034 36,0497,800 352 452 1,497 1,669 3,080 6,685 12,160 13,005 25,609 28,860 32,887 37,0028,000 361 463 1,542 1,715 3,160 6,852 12,475 13,510 26,265 29,600 33,740 37,9558,200 370 475 1,574 1,755 3,240 7,023 12,785 13,848 26,922 30,340 34,562 38,8778,400 378 486 1,613 1,798 3,320 7,195 13,095 14,186 27,579 31,080 35,382 39,7998,600 387 497 1,651 1,840 3,395 7,366 13,405 14,523 28,236 31,820 36,202 40,7218,800 395 508 1,690 1,883 3,475 7,538 13,720 14,861 28,893 32,560 37,022 41,6439,000 404 520 1,735 1,929 3,555 7,710 14,030 15,020 29,550 33,300 37,840 42,5659,200 414 531 1,766 1,969 3,635 7,894 14,345 15,354 30,206 34,040 38,706 43,5289,400 422 542 1,805 2,011 3,710 8,078 14,655 15,688 30,862 34,780 39,572 44,4549,600 431 554 1,843 2,054 3,790 8,262 14,965 16,021 31,518 35,520 40,438 45,4549,800 440 564 1,882 2,097 3,870 8,446 15,280 16,355 32,174 36,260 41,304 46,41710,000 448 576 1,928 2,145 3,950 8,630 15,595 16,600 32,830 37,000 42,170 47,380

    *All values approximate and can fluctuate with actual tool, please refer to Calibration Certificate for actual values

  • www.cantorque.com 13

    Turbo Electric Series Pump

    Quadra-Port Multi-Port Manifold (Max. 4 Ports ) *Optional

    Cool running continuous duty axial piston pump.

    Single phase induction motor.

    1 15V and 230V available.

    Starts under full load.

    Runs on reduced voltage.

    Quiet operation (approx. 80 dBA @ 10,000 PSI).

    Rugged remote pendant to control motor and valve.

    Easily adjustable pressure control knob.

    Auto-dump relieves oil pressure from hoses.

    Completely enclosed motor housing and electronics.

    2 Gallon oil reservoir.

    Precise PSI/BAR pressure gauge.

    Quick-connect no-drip couplers with safety locking collar.

    Supplied with dual non-conductive high pressure hose with couplers.

    TE1000 -- Maximum Flow, Maximum Durability - Minimum Weight

    620.

    00

    470.00370.00

    Electric TE1000

    TE1000 with Quadra Port (4 port) *optionalTE1000 with Mono Port

    Retract pressure is preset at 1,300 PSI.

    Resvr .Size

    (Gal.)

    Valve

    Control Type

    Flow Rate 115 V AC

    @

    10,000 ps i kg lbs600 psi

    Weight

    2 3 W ay/2 Pos.Solenoid 1.5 HP Single Phase 9.5 lpm 0. 9 lpm 883 4

    MotorSpecications

    Turbo Electric Series Pump

    Electric TE1000

  • 14 www.cantorque.comHoses available in all lengths(15 hose standard with all pumps)

    No-Drip Quick-Connect Couplers(Standard on all Powermaster equipment)

    Quadra-Port Multi-Port Manifold (Max. 4 Ports ). *Optional

    Cool running continuous duty axial piston pump.

    Powerful 1.5HP industrial duty air motor.

    Runs on 50 cfm / 80 PSI of air.

    Quiet operation (approx. 80 dBA @ 10,000 PSI).

    Rugged remote pendant to control motor and valve.

    Easily adjustable pressure control knob.

    Auto-dump relieves oil pressure from hoses.

    Filter-lubricator for long trouble free operation.

    2 Gallon oil reservoir.

    Precise PSI/BAR pressure gauge.

    Quick-connect no-drip couplers with safety locking collar.

    Supplied with dual non-conductive high pressure hose with couplers.

    TA1000 -- High Flow - High Speed for Heavy Duty Application

    Pneumatic TA1000

    TA1000 with Quadra Port (4port) *optionalTA 1000 with Mono Port

    Retract pressure is preset at 1,300 PSI.Standard Roll Bar Dimensions : 25-7/16 L x 20-1/2 H x 166-3/4 W

    Resvr .Size

    (Gal.)

    Valve

    Control Type

    Flow Rate @50 cfm/ 90psi

    10,000 ps i k g lbs600 psi

    WeightMotorSpecications

    2 3 W ay/2 Pos.Solenoid 1.5 HP Rotary Air 7 .9 lpm 0 .9 lpm 27 5962

    0.00

    470.00370.00

    Turbo Air Series PumpTurbo Air Series Pump

    Pneumatic TA1000

    Hoses available in all lengths(15 hose standard with all pumps)

    No-Drip Quick-Connect Couplers(Standard on all CanTorque equipment)

  • www.cantorque.com 15

    Pneumatic Torque wrenches are the preferred torquing method to achieve productivity with less man-power. CanTorque Pneumatic torque wrenches offer the reliable and dependable solution for the torquing and un-torquing of heavy duty bolts and nuts at various industries where speed, power, accuracy and safety are required. Maximum operating pressure is 90 psi (6 bar).

    Features of Vortex Series Pneumatic Torque Wrenches LightandCompact:Lightandcompacttooldesign,suitableforavarietyofapplications. HeavyDutyGearBox:Heavydutygearboxwiththrustbearingforlowfrictionandlongeroperationallife. LowNoiseLevel:Lownoiselevelwithnovibration. HighAccuracy:Vortexhasanaccuracyofbetterthan+/-5%withrepeatabilitywithin2%variation. ReactionBoot:Reactionarmprovisionedwithremovablebootforsoftpaddingorextensionasrequired. CustomizedReactionArm:Awiderangeofstandardandcustomizedreactionarmsavailableaspercustomerrequirement. WheelExtension:Varietyofwheelextensionsavailablefordeepreach,wheretoolclearanceisaproblem.

    Vortex Model

    Vortex Wrenches

    Lbf/ft Drive Size Speed Weight Accuracy (RPM) (KG)

    VX-130 30-130 1/2 42 4.2 +/-4%

    VX-500 125-500 3/4 25 5.8 +/-4%

    VX-750 185-750 3/4 12 5.8 +/-4%

    VX-1000 250-1040 1 9 5.9 +/-4%

    VX-2200 560-2200 1 6 8 +/-4%

    VX-3000 750-3000 11/2 3 9.2 +/-4%

    VX-4000 1000-4000 11/2 2.5 10.4 +/-4%

    VX-4800 1200-4800 11/2 2 10.4 +/-4%

    VX-6000 1630-6000 11/2 1.5 10.4 +/-4%

  • 16 www.cantorque.com

    CanTorque Stud Tensioners

    CT Series Topside Stud Tensioners

    CanTorque Stud Tensioners

    No torsional loading of fasteners.

    Direct loading - no damage to assembly.

    Easy and fast operation.

    Very high accuracy and repeatability.

    Automation feasible and can be used for critical applications.

    The CTST Stud Tensioner is very simple to use and consists of four parts -Threaded Puller , Load Cell, Bridge and Nut Driver(Nut Rotating Socket).

    CTST Series Stud Tensioners are designed for operation in a wide variety of applications including pipeline anges,heat exchangers, pressure vessels, compressor covers, boilers feed pumps, anchors, bolts and many others.

    NUT DRIVER /NUT ROTATING SOCKETBRIDGELOAD CELLTHREADED PULLER

    Stud tensioning is now the preferred method of tightening bolts and studs on all critical applications.Stud tensioners are designed for operation in a wide variety of applications including pipeline ange,heat exchangers, pressure vessels, compressor covers, boiler feed pumps, windmills and many others.We provide a comprehensive range of stud tensioners for optimum soluctions to stud tensioning requirements.Our stud tensioners and accessories are CE marked in accordance with Pressure Equipment and Machinery Directivesas applicable. In comparison to traditional tightening methods, tightening with stud tensioners oers signicant advantages.

    Brie

    CT Series Topside Stud Tensioners

    Stud tensioning is now the preferred method of tightening bolts and studs on all critical applications. Stud tension-

    ers are designed for operation in a wide variety of applications including Pipeline Flange, Heat exchangers, Pressure

    Vessels, Compressor Covers, Boiler Feed Pumps, Windmill and many others. We provide a comprehensive range of

    stud tensioners for optimum solutions to stud tensioning requirements. Our stud tensioners and accessories are Ce

    marked in accordance with Pressure equipment and Machinery Directives as applicable. In comparison to traditional

    tighening methods, tightening with stud tensioners offers signifi cant advantages.

    No torsional loading of fasteners. Direct load - no damage to assembly. Easy and fast operation. Very high accuracy and repeatability. Automation feasible and can be used for critical applications.

    The CTST Stud Tensioner is very simple to use and consists of four parts - Threaded Puller, Load Cell, Bridge and Nut Driver (Nut Rotating Socket).

    NUT DRIVER/NUTROTATINGSOCKETBRIDGELOAD CELL

    CT Series Topside Stud Tensioners

    The CTST Stud Tensioner is very simple to use and consists of four parts - Threaded Puller, Load Cell, Bridge and Nut The CTST Stud Tensioner is very simple to use and consists of four parts - Threaded Puller, Load Cell, Bridge and Nut

    THREADED PULLER

  • www.cantorque.com 17

    CanTorque Series Topside Stud Tensioners

    Brief Operational Sequence

    The nut-driver is placed over the nut (fig. 1). The

    bridge and load cell are then placed over the bolt

    (fig. 2). The Puller is then screwed over the stud

    protruding above the nut face (fig. 3) making sure

    that at least 1 x diameter of bolt is engaged with

    the Threaded Puller.

    Desired hydraulic pressure is now applied to load

    cell, which stretches the bolt (fig. 4). The nut is

    turned down using the nut-driver and tommy bar.

    The Pressure is then released leaving the stud

    loaded to the desired value.

    Features VersatileDesign:TheCTSTSeriesstandardvariabletensionersaredesignedtopro-videawiderangeofflexibility,coveringstudsizesfrom3/4to53/4(M-16toM-150).Differentstudsizesareaccommodatedby thesame loadcellbysimplychangingtheadaptorkitconsistingofThreadedPuller,BridgeandNutDriver.

    HighStrengthAircraftQualityAlloySteel:TheCTSTSeries tensionersoperateatamaximumpressureof1500BarandaremanufacturedfromhighstrengthAISI4340alloysteelpartsforlonglastingtroublefreeperformance.

    StrokeIndicator:TheCTSTSeriestensionershaveanexceptionalstrokeof15mm.TheIntegralStrokeIndicatorallowsthepistonstroketobeviewedwhiletensioningisinprogress.ARedlineonthepistonindicatesanoverstrokeensuringsafeoperation.

    SafeDesignineventofPistonOverStroke:TheCTSTseriestensionersaredesignedsothatineventofoverstrokethehighpressurefluidwillbereleasedfromtheinnersideoftheloadcell,thussavingtheoperatorfrompotentialexposure.

    MultiTensioning:TheCTSTSeriesloadcellisprovisionedwithtwoconnectionsandthis acts as amanifold formulti tensioning applications. By using high pressure linkhoses,anynumberofbolt tensionerscanbeconnectedandusedsimultaneously.Thisensuresequaltighteningofallboltsontheflangeandreducesworktime.

    Anti Roll, CompositeMaterial Seals:All CTSTTensioners are fittedwithAnti Roll,CompositeMaterialsealsforlongerlifeandhighreliability.Thesealsusedhavealowco-efficientoffrictionsothatthepistoncanbereturnedtoaclosedpositionwithminimaleffort.CTSTSeriestensionerscanbeprovidedwithmachinedPU(polyurethane)sealsifrequestedbythecustomer.

    FloatingPiston:Theuniquepistondesignallows2tiltwithoutanylossofload,pre-ventingpistonseizureordamagetopistonbore.

    THECTSTSERIESTOPSIDEBOLTTENSIONERSAREONEOFTHEMOSTLIGHT,COMPACTANDVERSATILELINEOFTENSIONERSAVAILABLE:

    fig. 1 fig. 2

    fig. 3 fig. 4

  • 18 www.cantorque.com

    CTST Series Topside Stud Tensioners

    *Indicates weight of Load Cell + Adaptor Kit of particular size.

    Technical Specifications Model No. Bolt Size Max Load Hyd Area O.D. Min Relief Height Clearance Weight Pinch C A BLoad Cell Adaptor Kit inch mm Ton kN In2 mm2 mm mm mm mm mm kg

  • www.cantorque.com 19

    CTST Series Topside Stud Tensioners

    * Weight of load cell + Adaptor Kit of particular size.Please refer to catalogue sheet - Basic of Tensioning for stud tensioners application and pressure calculation.

    CTST Series Topside Stud Tensioners

    Model No. Bolt Size Max Load Hyd Area O.D. Min Relief Height Clearance Weight Pinch C A BLoad Cell Adaptor Kit inch mm Ton kN In2 mm2 mm mm mm mm mm kg

  • 20 www.cantorque.com

    Tensioning Pump Specifications

    Hand Pump PU-HP-1500

    Air Operated Tension Hydraulic Pump PU-AH-1500

    T he P U-AH-1500 a ir operated pumps are des igned and manufactured in collaboration with Maximator G mbH,

    G ermany and meet the highes t technica l and s afety requirements of high pres s ure equipment.

    O ther Models with higher maximum operating pres s ures , digita l pres s ure gauges and larger hydraulic res ervoir

    capacities are ava ilable as per cus tomer requirements .

    Pressure Ratio 1:350

    Displacement Volume Cm3 1,3

    Operating Pressure, Max. ( at 5.1 bar Pre Limited (PL) Air Pressure ) bar 1.800

    P ump

    C ompres s ed air s upply (air drive)

    S tainles s S teel Tank C apac ity

    System Operating Air Pressure, Max. bar 5.1

    Safety Valve Set Pressure bar 5.5

    Oil T ank capacity litre 5

    Technical Features :S tainles s S teel F rame: T he hydraulic unit is ins talled in a weather proof s tainles s s teel protection frame.

    L ogic al C ontrol P anel: Logical layout des ign engraved for eas y operation.

    C alibrated P res s ure G auge: C alibrated 150mm (6), liquid filled, S S F rame, 2500 bar rating pressure gauge with dual

    reading of bar & psi.

    C omplete A ir S ys tem: S ys tem includes F R L Unit, a ir pres s ure gauge and control knob for s afe air control and s upply.

    Higher Operating Pressure: Pump has max working pressure of 1500 bar to cover all bolt tensioning applications .

    L ight Wei ght: Unit weighs only 18 K g and meas ures 450mm x 340mm x 480mm.

    L ower Input air P res s ure: Higher pres s ure ratio of 1 : 350 ens ures les s input air pres s ure for operation.

    Quic k C onnec t Outlet: P ump comes fitted with quick connect outlet for eas y connection of hydraulic hos e.

    Hand Pump T his hand pump is s pecia ly des igned for bolt tens ioner applications .

    T he pump is compact and light in weight with longer handle needing

    very little effort to generate max working load. All pumps are s upplied

    with s uitable fittings and s ta inles s s teel 4 dia pres s ure gauge.

    PU-HP-1500 1500 bar Hand Pump c/w 200 bar gauge 2.0 HCS-150-F 750 120 200 11.0

    Model No. Des c riptionOutlet

    Coupler LengthDimensions

    HeightNet

    Weight

    (Liters) mm Kg.

    Usable OilCapacity

    mm mmWidth

    :

    CT Series Specifications

    The PU-AH-1500 air operated pumps are designed and manufactured in collaboration with Maximator GmbH, Germany and meet the highest technical and safety requirements of high pressure equipment.

    Hand Pump PU-HP-1500

    Air Operated Tension Hydraulic Pump PU-AH-1500

    T he P U-AH-1500 a ir operated pumps are des igned and manufactured in collaboration with Maximator G mbH,

    G ermany and meet the highes t technica l and s afety requirements of high pres s ure equipment.

    O ther Models with higher maximum operating pres s ures , digita l pres s ure gauges and larger hydraulic res ervoir

    capacities are ava ilable as per cus tomer requirements .

    Pressure Ratio 1:350

    Displacement Volume Cm3 1,3

    Operating Pressure, Max. ( at 5.1 bar Pre Limited (PL) Air Pressure ) bar 1.800

    P ump

    C ompres s ed air s upply (air drive)

    S tainles s S teel Tank C apac ity

    System Operating Air Pressure, Max. bar 5.1

    Safety Valve Set Pressure bar 5.5

    Oil T ank capacity litre 5

    Technical Features :S tainles s S teel F rame: T he hydraulic unit is ins talled in a weather proof s tainles s s teel protection frame.

    L ogic al C ontrol P anel: Logical layout des ign engraved for eas y operation.

    C alibrated P res s ure G auge: C alibrated 150mm (6), liquid filled, S S F rame, 2500 bar rating pressure gauge with dual

    reading of bar & psi.

    C omplete A ir S ys tem: S ys tem includes F R L Unit, a ir pres s ure gauge and control knob for s afe air control and s upply.

    Higher Operating Pressure: Pump has max working pressure of 1500 bar to cover all bolt tensioning applications .

    L ight Wei ght: Unit weighs only 18 K g and meas ures 450mm x 340mm x 480mm.

    L ower Input air P res s ure: Higher pres s ure ratio of 1 : 350 ens ures les s input air pres s ure for operation.

    Quic k C onnec t Outlet: P ump comes fitted with quick connect outlet for eas y connection of hydraulic hos e.

    Hand Pump T his hand pump is s pecia ly des igned for bolt tens ioner applications .

    T he pump is compact and light in weight with longer handle needing

    very little effort to generate max working load. All pumps are s upplied

    with s uitable fittings and s ta inles s s teel 4 dia pres s ure gauge.

    PU-HP-1500 1500 bar Hand Pump c/w 200 bar gauge 2.0 HCS-150-F 750 120 200 11.0

    Model No. Des c riptionOutlet

    Coupler LengthDimensions

    HeightNet

    Weight

    (Liters) mm Kg.

    Usable OilCapacity

    mm mmWidth

    :

    CT Series Specifications

    Other Models with higher maximum operating pressures, digital pressure gauges and larger hydraulic reservoircapacities are available as per customer requirements .

    Technical Features: StainlessSteelFrame:Thehydraulicunitisinstalledinaweatherproofstainlesssteelprotectionframe. LogicalControlPanel:Logicallayoutdesignengravedforeasyoperation. CalibratedPressureGauge:Calibrated150mm(6),liquidfilled,SSFrame,2500barratingpressuregaugewithdualreadingofbar&psi. CompleteAirSystem:SystemincludesFRLUnit,airpressuregaugeandcontrolknobforsafeaircontrolandsupply. HigherOperatingPressure:Pumphasmaxworkingpressureof1500bartocoverallbolttensioningapplications. LightWeight:Unitweighsonly18Kgandmeasures450mmx340mmx480mm. LowerInputairPressure:Higherpressureratioof1:350ensureslessinputairpressureforoperation. QuickConnectOutlet:Pumpcomesfittedwithquickconnectoutletforeasyconnectionofhydraulichose.

    Hand Pump PU-HP-1500

    Hand Pump

    Hand Pump PU-HP-1500

    Air Operated Tension Hydraulic Pump PU-AH-1500

    T he P U-AH-1500 a ir operated pumps are des igned and manufactured in collaboration with Maximator G mbH,

    G ermany and meet the highes t technica l and s afety requirements of high pres s ure equipment.

    O ther Models with higher maximum operating pres s ures , digita l pres s ure gauges and larger hydraulic res ervoir

    capacities are ava ilable as per cus tomer requirements .

    Pressure Ratio 1:350

    Displacement Volume Cm3 1,3

    Operating Pressure, Max. ( at 5.1 bar Pre Limited (PL) Air Pressure ) bar 1.800

    P ump

    C ompres s ed air s upply (air drive)

    S tainles s S teel Tank C apac ity

    System Operating Air Pressure, Max. bar 5.1

    Safety Valve Set Pressure bar 5.5

    Oil T ank capacity litre 5

    Technical Features :S tainles s S teel F rame: T he hydraulic unit is ins talled in a weather proof s tainles s s teel protection frame.

    L ogic al C ontrol P anel: Logical layout des ign engraved for eas y operation.

    C alibrated P res s ure G auge: C alibrated 150mm (6), liquid filled, S S F rame, 2500 bar rating pressure gauge with dual

    reading of bar & psi.

    C omplete A ir S ys tem: S ys tem includes F R L Unit, a ir pres s ure gauge and control knob for s afe air control and s upply.

    Higher Operating Pressure: Pump has max working pressure of 1500 bar to cover all bolt tensioning applications .

    L ight Wei ght: Unit weighs only 18 K g and meas ures 450mm x 340mm x 480mm.

    L ower Input air P res s ure: Higher pres s ure ratio of 1 : 350 ens ures les s input air pres s ure for operation.

    Quic k C onnec t Outlet: P ump comes fitted with quick connect outlet for eas y connection of hydraulic hos e.

    Hand Pump T his hand pump is s pecia ly des igned for bolt tens ioner applications .

    T he pump is compact and light in weight with longer handle needing

    very little effort to generate max working load. All pumps are s upplied

    with s uitable fittings and s ta inles s s teel 4 dia pres s ure gauge.

    PU-HP-1500 1500 bar Hand Pump c/w 200 bar gauge 2.0 HCS-150-F 750 120 200 11.0

    Model No. Des c riptionOutlet

    Coupler LengthDimensions

    HeightNet

    Weight

    (Liters) mm Kg.

    Usable OilCapacity

    mm mmWidth

    :

    CT Series Specifications

    This hand pump is specialy designed for bolt tensioner applications .The pump is compact and light in weight with longer handle needingvery little effort to generate max working load. All pumps are suppliedwith suitable fittings and stainless steel 4 dia pressure gauge.

  • www.cantorque.com 21

    High Pressure Accessories

    High Pressure Accessories

    High Pressure Tensioner HosesHigh P res s ure Tens ioner Hos es for various tens ioning applications are ava ilable in different lengths and end-fittings

    Manifolds , F ittings and C ouplings of various configurations are ava ilable for a ll tens ioning applications :

    Manifolds, Fittings and Couplings:

    P a r t N o .

    P U-HG -0150 1.5 F X F

    P U-HG -0300 3.0 F x F

    P U-HG -0300-L 3.0 F x M

    P U-HG -0500 5.0 F x F

    P U-HG -0500-L 5.0 F x M

    O A L M tr. Q R C

    4- P ly cons truction.

    Available in 1.5m, 3m and 5m s tandard lengths . Other cus tom

    built lengths als o available.

    Max. Wo rking P res s ure : 1800 B ar.

    B urs t P res s ure : 4500 B ar.

    Min. B end R adius : 150mm

    All hos es fitted with quick connect C ouplings at both ends .

    Wo rking Temperature R ange: -30 to 80 Deg C .

    Tens ioner Hos e R eel of upto 500m s ingle hos e for s ub s ea

    applications available with required end fittings .

    Features:

    Manifold /B locks for 1500 working pres s ure.

    T-F ittings for 1500 B ar working pres s ure.

    Male / F emale C ouplings for 1500 and 2500 bar

    working pres s ure.

    High P res s ure F ittings and Adaptors .

    P a r t N o .

    HC S -150-F C oupling, 1 50 M pa

    HC S -150-M Nipple, 1 50 M pa

    HC S -250-F C oupling, 2 50 M pa

    HC S -250-F Nipple, 2 50 M pa

    HF -G 4-G 4 F itting, G 1 /4 C S

    HF -G 4-M16 F itting G 1 /4 x M 16

    D e s c r iptio n

    Hose Reel

    Manifolds

    Lead Hose

    Fittings

    Connecting Hose

    Couplings

    High Pressure Accessories

    High Pressure Tensioner HosesHigh Pressure Tensioner Hoses for various tensioning applications are available in different lengths and end-fittings

    Features: 4-Plyconstruction.

    Availablein1.5m,3mand5mstandardlengths.Othercustombuiltlengthsalsoavailable.

    Max.WorkingPressure:1800Bar.

    BurstPressure:4500Bar.

    Min.BendRadius:150mm

    AllhosesfittedwithquickconnectCouplingsatbothends.

    WorkingTemperatureRange:-30to80C.

    TensionerHoseReelofupto500msinglehoseforsubseaapplicationsavailablewithrequiredendfittings.

    Manifolds, Fittings and Couplings:Manifolds, Fittings and Couplings of various configurations are available for all tensioning applications:

    Manifold/Blocksfor1500Barworkingpressure.

    T-Fittingsfor1500Barworkingpressure.

    Male/FemaleCouplingsfor1500and2500barworkingpressure.

    HighPressureFittingsandAdaptors.

    High Pressure Accessories

    High Pressure Tensioner HosesHigh P res s ure Tens ioner Hos es for various tens ioning applications are ava ilable in different lengths and end-fittings

    Manifolds , F ittings and C ouplings of various configurations are ava ilable for a ll tens ioning applications :

    Manifolds, Fittings and Couplings:

    P a r t N o .

    P U-HG -0150 1.5 F X F

    P U-HG -0300 3.0 F x F

    P U-HG -0300-L 3.0 F x M

    P U-HG -0500 5.0 F x F

    P U-HG -0500-L 5.0 F x M

    O A L M tr. Q R C

    4- P ly cons truction.

    Available in 1.5m, 3m and 5m s tandard lengths . Other cus tom

    built lengths als o available.

    Max. Wo rking P res s ure : 1800 B ar.

    B urs t P res s ure : 4500 B ar.

    Min. B end R adius : 150mm

    All hos es fitted with quick connect C ouplings at both ends .

    Wo rking Temperature R ange: -30 to 80 Deg C .

    Tens ioner Hos e R eel of upto 500m s ingle hos e for s ub s ea

    applications available with required end fittings .

    Features:

    Manifold /B locks for 1500 working pres s ure.

    T-F ittings for 1500 B ar working pres s ure.

    Male / F emale C ouplings for 1500 and 2500 bar

    working pres s ure.

    High P res s ure F ittings and Adaptors .

    P a r t N o .

    HC S -150-F C oupling, 1 50 M pa

    HC S -150-M Nipple, 1 50 M pa

    HC S -250-F C oupling, 2 50 M pa

    HC S -250-F Nipple, 2 50 M pa

    HF -G 4-G 4 F itting, G 1 /4 C S

    HF -G 4-M16 F itting G 1 /4 x M 16

    D e s c r iptio n

    Hose Reel

    Manifolds

    Lead Hose

    Fittings

    Connecting Hose

    Couplings

    High Pressure AccessoriesHigh Pressure Accessories

    High Pressure Tensioner HosesHigh P res s ure Tens ioner Hos es for various tens ioning applications are ava ilable in different lengths and end-fittings

    Manifolds , F ittings and C ouplings of various configurations are ava ilable for a ll tens ioning applications :

    Manifolds, Fittings and Couplings:

    P a r t N o .

    P U-HG -0150 1.5 F X F

    P U-HG -0300 3.0 F x F

    P U-HG -0300-L 3.0 F x M

    P U-HG -0500 5.0 F x F

    P U-HG -0500-L 5.0 F x M

    O A L M tr. Q R C

    4- P ly cons truction.

    Available in 1.5m, 3m and 5m s tandard lengths . Other cus tom

    built lengths als o available.

    Max. Wo rking P res s ure : 1800 B ar.

    B urs t P res s ure : 4500 B ar.

    Min. B end R adius : 150mm

    All hos es fitted with quick connect C ouplings at both ends .

    Wo rking Temperature R ange: -30 to 80 Deg C .

    Tens ioner Hos e R eel of upto 500m s ingle hos e for s ub s ea

    applications available with required end fittings .

    Features:

    Manifold /B locks for 1500 working pres s ure.

    T-F ittings for 1500 B ar working pres s ure.

    Male / F emale C ouplings for 1500 and 2500 bar

    working pres s ure.

    High P res s ure F ittings and Adaptors .

    P a r t N o .

    HC S -150-F C oupling, 1 50 M pa

    HC S -150-M Nipple, 1 50 M pa

    HC S -250-F C oupling, 2 50 M pa

    HC S -250-F Nipple, 2 50 M pa

    HF -G 4-G 4 F itting, G 1 /4 C S

    HF -G 4-M16 F itting G 1 /4 x M 16

    D e s c r iptio n

    Hose Reel

    Manifolds

    Lead Hose

    Fittings

    Connecting Hose

    Couplings

    High Pressure Accessories

    Part No. Description

    HCS-150-F Coupling, 150 Mpa

    HCS-150-M Nipple, 150 Mpa

    HCS-250-F Coupling, 250 Mpa

    HCS-250-F Nipple, 250 Mpa

    HF-G4-G4 Fitting, G1/4 CS

    HF-G4-M16 Fitting, G 1/4 x M16

  • 22 www.cantorque.com

    Stud Tensioner Application

    Important Formula:(A)

    (B)

    (C)

    (D)

    (E)

    Useful Conversions:Ar

    Load (Force)

    Pressure

    Pressure

    Basic Calculation and Working:a.

    b.

    c.

    d.

    e.

    f.

    Residual Stud Load = Stud Stress x Stud Tensile Stress Area= (Stud Stretch x Modulus of Elasticity x Stud Tensile stress area) Effective Length.

    Stud Tensile Stress Area = (3.14 x D x D) 4 (D is smallest Stress Dia of Stud)

    % of Yield Strength = (Stud Stress Required / Yield Strength of stud x 100)

    Hydraulic Pressure = (Residual Stud Load x Load Relaxation Factor) Hydraulic Area of Load Cell.

    L oad R elaxation Factor = 1.01 + (Stud Size (Dia.) Effective Length) or 1.1 which ever is greater.

    2 2 2 2 2ea : 1 millimeter (mm ) = 0.00155 inch 1 inch = 645.16 mm2 2 2 2 2: 1 centimeter (cm ) = 0.155 inch 1 inch = 6.4516 cm

    : 1 Metric Ton (mt) = 1.10231 Short Ton (US) 1 mt = 0.9842 Long Ton (UK): 1 Kilo Newton, kN = 224.8089 lb 1 kN = 0.0958 mt: 1 Metric Ton (mt) = 9.8066 kN 1 st = 0.0958 mt

    : 1 Megapascal (MPa) = 10 Bar 1 bar = 14.5037 psi2 2 2: 1 Kg per cm (Kg/cm ) = 0.98066 Bar 1 bar = 1.0197 Kg/cm

    : 1 Megapascal (MPa) = 10 Bar 1 bar = 14.5037 psi

    50% Tool Coverage 100% Tool Coverage

    Calculate Stud Residual Load: Residual Load can be calculated from known stress or bolt stretch requirement.

    Calculate Load Relaxation factor using Stud Dial and Effective Length. It can be calculated from below formula/Chart

    Calculate application hydraulic load.

    Calculate hydraulic pressure for required hydraulic load.

    Select Tensioning Procedure. (25%, 50%, 100%...etc.)

    Calculate pass load as applicable. (Max applied load should never exceed 95% stud yield strength).

    Fine Pitch Coarse Pitch

    L

    D

    1 2 3 4 5 6 7 8 9 10 11 12 13 14

    1.11.21.31.41.51.6

    1

    F h/F r F h = Hydraulic L oadF r = R es idual L oad

    F h/F r

    L /D

    CT Series SpecificationsStud Tensioner Application

    Website: www.powermaster

    a. Calculate Stud Residual Load: Residual Load can be calculated from known stress or bolt stretch requirement.b. Calculate Load Relaxation factor using Stud Diameter and Effective Length. It can be calculated from below formula/chart.

  • www.cantorque.com 23

    CT Wave

    PhysicalSIze:Width (2.5in./63.5mm.)Height (6.5in./165mm.)Depth (1.24in./31.5mm.)Weight: 13.5 ounces (with batteries)DISPLAy:Membrane switchpad withtwelve tactile keysOperating Temperature:14F to 140F (-10C to 60C)CASe:Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed)DATA OuTPuT:Bi-directional RS232 serial port.Windows PC interface softwareDISPLAy:1/8in.VGAgrayscaledisplay(240 pixels x 160 pixels)Viewable area 2.4in. x 1.8in.(62mm. x 45.7mm.)EL backlit (on/off/auto)

    Ultrasonic SpecificationsMeASuReMeNT MODeS:Pulse-Echo (standard)Pulse-Echow/Gate(fineadjust)PuLSeR:Squarewavepulserwithadjustablepulsewidth (spike, thin, wide)ReCeIveR:Manual or Auto Set gain controlwith 40dB rangeTIMINg:10-bit 250 MHz digitizerWarranty2 year limited

    Power SourceThree 1.5V alkaline or 1.2V NiCad AA cellsTypically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included)Auto power off if idle for 5 minBattery status icon

    MeasuringRANge:From 1in. to 48in.(2.54mm. to 122mm.) boltsTimeNanosecondsElongationChange in length(inches/millimeters)LoadForce load applied (pounds kPSI or megapascals MPa)StressForce for unit area stress applied (inches per inch or millimeters per millimeter)ReSOLuTION:+/- 0.00001in. (0.0001mm.)Velocity Range: 0.0492 to .3937 in/ms (1250 to 9,999 meters/sec)Fixed, Single, and Two-pointzero calibration optionsSelect bolt material types from a pre-set or custom listuNITS:English&Metric/Fahrenheit&Celsius

    DisplayA-ScanRectified +/- (half wave view), or RF (full waveform view) Large DigitsDisplay and toggle between nanoseconds, elongation,load, stress, and strain

    DIgIT HeIgHT: 0.400 in. (10mm.)LimitsBar(alarmlimits)SetHi&Loalarmlimits for displaying an acceptable tolerance rangeRepeatabilityBarGraphBargraphindicatesstability of measurementData Logger (Internal)Total of 8,000 readings in multiple bolt groups. Stores both waveform views, nanoseconds, elongation, load, stress and strain for eachreadingMeMORy:16 megabit non-volatile ram

    TransducerTRANSDuCeR TyPeS:Single element (1 MHz to 10 MHz&1/8in.to1in.diameters)Locking quick disconnect00 LEMO connectorsStandard 10 foot cableCustom transducers available for special ap-plicationsTemperature probe for automatic temperature compensation

    FeaturesSeTuPS:64 custom user defined setups.Factory setups can also be edited by the usergATe:Gateusedtofineadjustwherethedetectionpoint occursALARM LIMITS:Set Hi and Lo tolerances with audible beeper, viewable scan bar, and visual LEDsAuTO SeT:Locates the detection signal, optimizes the gainsetting,andadjuststheoveralldisplayto show the waveform and detection point automaticallyFIeLD CALIBRATION:Vector&linearregression

    CertificationFactory calibration traceable to national standards.

  • 24 www.cantorque.com

    CanTorque Backup Wrenches

    Heavy duty industrial construction.

    Ergonomic and Safe.

    Totally Mechanical - No Hydraulic.

    Easy to release.

    Eliminates Striker Wrenches, Shims a Vice Grip Style Backup Wrenches.

    Stock in Standard and Metric Sizes.

    Features :

    CanTorque Backup Wrenches

    Technical Details:

    BC-19M 19 BC-46M 46 BC-012 3/4 BC-200 2

    BC-22M 22 BC-50M 50 BC-014 7/8 BC-203 2.3/16

    BC-24M 24 BC-55M 55 BC-100 1 BC-206 2.3/8

    BC-27M 27 BC-60M 60 BC-102 1.1/8 BC-209 2.9/16

    BC-30M 30 BC-65M 65 BC-104 1.1/4 BC-212 2.3/4

    BC-32M 32 BC-70M 70 BC-107 1.7/16 BC-215 2.15/16

    BC-36M 36 BC-75M 75 BC-1 10 1.5/8 BC-302 3.1/8

    BC-41M 41 BC-80M 80 BC-1 13 1.13/16

    Metric Sizes Standard Sizes

    Part No.Part No.Part No. Part No. inch inchmmmm

    CTBW -1 Wrench Handle

    Technical Details:CTBW-1 Wrench Handle

    Standard Sizes Metric Sizes

    Part No. Inch Part No. Inch Part No. mm Part No. mm

    CTBW-012 3/4 CTBW-200 2 CTBW-19M 19 CTBW-46M 46

    CTBW-014 7/8 CTBW-203 2 3/16 CTBW-22M 22 CTBW-50M 50

    CTBW-100 1 CTBW-206 2 3/8 CTBW-24M 24 CTBW-55M 55

    CTBW-102 1 1/8 CTBW-209 2 9/16 CTBW-27M 27 CTBW-60M 60

    CTBW-104 1 1/4 CTBW-212 2 3/4 CTBW-30M 30 CTBW-65M 65

    CTBW-107 1 7/16 CTBW-215 2 15/16 CTBW-32M 32 CTBW-70M 70

    CTBW-110 1 5/8 CTBW-302 3 1/8 CTBW-36M 36 CTBW-75M 75

    CTBW-113 1 13/16 CTBW-41M 41 CTBW-80M 80

    Features: Heavydutyindustrialconstruction. ErgonomicandSafe. TotallyMechanical-NoHydraulic. Easytorelease. EliminatesStrikerWrenches,Shims andViceGripStyle Backup Wrenches.

    StockinStandardandMetricSizes

    Heavy Duty Handle

  • www.cantorque.com 25

    Torque Wrenches

    ForcertaintyandsafetyaskforCanTorquebynameandacceptnosubstitutes.TherearemanyreasonsforinsistingonCanTorqueWrenches.

    ACCURATE IN USEMechanismpivotsonthesquaredrive.Guaranteedaccuracywhereeverthewrenchisgrasped.

    DURABLEHard-wearing,heavy-dutymechanism.

    SAFETY IN USEProgressivetorquebuilduptotheselectedsettingeasilydirectedbysight,soundandfeel.Torquesettingcannotbeexceededunintentionally,thusavoidingmechanicaldamageandriskofinjury.

    ACCURATE IN DESIGNGuaranteedaccuracyof+/-4%throughoutthetorqueRange.Ensuressafetyandavoidanceofdamage.

    EASY TO USETORQUE SCALELarge,clearscalemarkingsinNm,kg/m,lbf/inandlbf/ft.Accuratesettingeasilyobtained.

    Torque WrenchesCanTorqueTorqueWrencheshaveprovedthemselvesbothreliableandaccurateovermanyyearsoffullservice,masteringeveryconceivablenuttighteningoperationinallareasofindustry.

    Ratcheting Torque WrenchBuilt in ratcheting mechanism provisional for ease of

    operation without affecting accuracy & life.

    CONVENIENCE IN USEPush-through,userreplaceablesquaredrive.Enableswrenchtobeturnedoverandusedinoppositedirection:withnoneedtoreturnwrenchtomanufacturerfordriverepair.

    COMPACTHeadnowiderthanatypicalsocketor,inthecaseofratchetingversions,nobiggerthanatypicalratchethandlehead.Improvedaccessinconfinedspaces.

    ROBUSTExtremelystrongconstruction.

    EASE IN USELengthcalculatedtoenableacontrolledeffortatalltorquesettingsessentialinalltorquelimitingsituations.Avoidsaccidentallyexceedingrequiredtorquesettingsopreventingdamageandsafetyrisks.

    SECURITYSecureandrapidtorquesettingadjustment.Easilyadjustedyetimpossibletoalterunintentionally,ensuringaccuratesettingsatalltimes.

    The ever-increasing need for accurate torque tightening throughout industry, in both manufacturing and servicing demands the use of reliable,accurate torque wrenches. There are many reasons for insisting on CanTorque Wrenches from CanTorque.

    For certainty and safety ask for CanTorque by name and accept no substitutes.

    CONVENIE NCE IN U SEP ush-through, userreplaceable square drive.E nables wrench to beturned over and used inopposite direction: withno need to return wrenchto manufacturer for driverepair.

    COMPACTHead no wider than atypical socket or, in thec a s e o f r a t c h e t i n gversions, no bigger than atypical r atchet handlehead.I mpr oved a c c es s i nconned spaces.

    ROBUSTE x t r e m e l y s t r o n gconstruction.Resists all but the mostsevere accidental damage.

    EASE IN USEL ength ca l cul a ted toenable a controlled eortat al l torque setti ngsessential in all torquelimiting situations.A v oi ds a c c i den ta l l yexceeding required torquesetti ng so pr eventi ngdamage and safety risks.

    SECURITYSecure and rapid torquesetting adjustment.E a s i l y a dj u s ted y etI mpossible to alter byaccident-ensures accuratesetting at all times.

    DURABLEHar d-wearing, heavy-dutymechanism.Retains original accuracy

    +of 3% for up to 10,000-o pe r a t i o n s wi t h o u tRecali bration.

    SAFETY I N USEPr ogressive torque build-up to the selected settingeasily detected by sight,sound and feel.Torque setting cannot beexceeded by accident.A v o i d s m e c h a n i c a ldamage and ris k of injury.

    ACCURATE IN DESIGNGuaranteed accuracy of +-3% throughout the torqueRange.E n s u r es s a f ety a n davoidance of damage.

    EASY TO USETORQUE SCALEL a r g e , c l e a r s c a l emarkings in Nm, kg/m,lbf/in and lbf/ft.Accurate setting easilyobtained.

    ACCURA TE IN USEMachanism pivots on thesquare drive.G ua r a nteed a ccur a cywher ever the wr enchis grasped.

    CanTorque Torque Wrenches have proved themselves both reliable and accurate over many years of full service, mastering everyconceivable nut tightening operation in all areas of industry.

    In built ratcheting mechanism provisional for ease of operationwithout effecting accuracy & life.

    Ratcheting Torque Wrench

    Torque Wrenches

    Torque Wrenches

    Model Lbf/ft Sq Drive OAL WT. Accuracy

    CTC50 10-50 3/8 19.50 1.10 +/-4%

    CTC100 20-100 1/2 21.50 1.80 +/-4%

    CTC160 40-160 1/2 23.80 2.70 +/-4%

    CTC250 50-250 1/2 33.10 3.30 +/-4%

    CTC600 150-600 3/4 49.60 8.30 +/-4%

    CTC1000 500-1000 1 63.16 18.00 +/-4%

    CTC Click Wrench

  • 26 www.cantorque.com

    Torque MultipliersHandtorque - Multipliers

    What is a Torque Multiplier?It is a simple gear box, works on the principle of Epicyclic Gearing. The given load at the input gets multiplied as per the multiplication factor and transmitted at the output, thereby with a minimum effort you achieve greater load.

    How do They Work?Handtorque multipliers incorporate an Epicyclic or Planetary gear train having one or more stages. Each stage of gearing increases the torque applied by a factor of 5, allowing to offer multipliers in ratios of 5:1, 25:1 and 125:1. In the planetary gear system, torque is applied to the input gear or Sun gear. Three or four planet gears whose teeth are engaged with the sun gear and therefore rotate. The outside casing of the multiplier, or Annulus is also engaged with the planet gear teeth, and would normally rotate in the opposite direction to the sun gear. A reaction arm prevents the annulus from rotating, and this causes the planet gears to orbit around the sun. The planet gears are held between input and output plate which also holds the output square drive. Therefore, as the planetary gears orbit around the sun gear, and the output plate, the square drive turns.

    Why use a Torque Multiplier?Safety - Use of long levers can be dangerous. Torque multipliers mean a reduction in the lever length or operator effort by a factor of 5, 25 or 125.Space Limitation - The use of a long lever may be impossible due to restricted space.Accuracy - Torque will be applied most accurately when it is applied smoothly and slowly. Torque multipliers enable this by removing much of the physical effort from the tightening task.

    Advantages of Torque Multipliers: Theratiostatedisthetruetorquemultiplicationfactor. Nocorrectionchartsareneededtodeterminetorqueoutput. Strong,safeAnti-windupratchetavailableonmostmodelsforsafeandcomfortableoperation. Awiderangeofalternativereactionarmsareavailableaspercustomersrequirement,makingtheTorqueMultiplieradaptableto many applications.

    25 Revolutions

    Input 200 N.m

    = Torque

    = Velocity

    Output 5000 N.m

    0.84 Revolutions

  • www.cantorque.com 27

    Torque Multipliers

    Anti Wind-Up Rachet (AWUR):With any high ratio gearbox (25:1 or more) a certain amount of wind-up (spring) has to be taken up before any useful tightening work is applied to the nut.

    Each time the input device is released, the wind-up will rotate it back against the direction of operation.

    The Anti Wind-Up Ratchet retains all of the wind-up forces as they are created, with the following benefits:

    1. The torque input device can not fly backwards against the direc-tion of operation if it is suddenly released.

    2. Without an Anti Wind-Up Ratchet, it will often be necessary to continue to make 360 sweeps with the torque input device other-wisethemultiplierwillunwind.However,obstructionswilloftenmake this impossible.

    3. With an Anti Wind-Up Ratchet fitted, the multiplier becomes locked onto the nut because the reaction plate is held hard against the reaction point. This means that even used upside down, the multiplierwillsupportitsownweight.

    Multiplier behaves like a very stiff Spring

    Multiplier will achieve maximum torqueonly after the Spring has been taken up.

    In this application, if it takes more than 180to take up the wind-up at the required

    torque, this tightening operation will beimpossible without an Anti Wind-Up Ratchet.

    SaFeTy NOTe : additional support is recommended as failure in the bolt, socket or multiplier will release the wind-up forces and cause the multiplier to drop.

    = Torque

    = Reaction For

  • 28 www.cantorque.com

    Torque Multipliers

    Handtorque - Standard SeriesHandtorque - Standard Series

    Features :Accuracy better than +_ 4%.

    Precision tightening and loosening of all heavy duty fasteners.

    Low energy input with high torque transfer.

    Higher capacity multipliers are furnished with strong ratchets (Anti-wind up mechanism) allowing jobs to be performed easily ,

    efciently, and safely.

    Precision Manufacturing ensures long life and premier quality.

    A groove on output Square breaks if over loaded in excess of 20% of its capacity.

    Highest possible load factor is guaranteed due to design and use of forged components.

    * Including reaction plate.

    Standard Series, to 47500 N.m

    6000 4500 25 1/2 1.1/2 168 226 115 310 22.00 48.40

    9500 7000 25 3/4 1.1/2 195 256 150 350 33.00 72.60

    9500 7000 125 1/2 1.1/2 195 301 150 350 35.50 78.10

    17000 12500 25 3/4 2.1/2 220 360 164 480 52.00 114.40

    17000 12500 125 1/2 2.1/2 220 404 164 480 57.00 125.40

    47500 35000 125 3/4 2.1/2 315 550 164 480 80.00 176.00

    BTM-5

    BTM-5/25 2700 2000 25 1/2 1 136 163 89 260 11.50 25.30

    BTM-6 3400 2500 5 3/4 1.1/2 136 149 105 260 9.20 20.24

    BTM-6/25 3400 2500 25 1/2 1.1/2 136 176 105 260 12.00 26.40

    2700 2000 5 3/4 1 136 135 89 260 8.40 18.48

    BTM-7/25Fitted with A WUR

    BTM-9/25Fitted with A WUR

    BTM-9/125Fitted with A WUR

    BTM-1 1/25Fitted with A WUR

    BTM-1 1/125Fitted with A WUR

    BTM-13/125Fitted with A WUR

    Model No.Weight*C apac ity

    InputSquare

    A

    OutputSquare

    Cmin

    CmaxRatio

    inchinch mmN.m Ibf.ft mm

    B

    mm mm kg lbs

    BTM-7 6000 4500 5 3/4 1.1/2 168 174 115 310 18.00 39.60

    C

    B

    A

    Torque Multipliers

    Features: Accuracybetterthan+_4%. Precisiontighteningandlooseningofallheavydutyfasteners. Lowenergyinputwithhightorquetransfer. Highercapacitymultipliersarefurnishedwithstrongratchets(Anti-windupmechanism)allowingjobstobeperformedeasily,effcientlyandsafely. Precisionmanufacturingensureslonglifeandpremierquality. Agrooveonoutputsquarebreaksifoverloadedinexcessof20%ofitscapacity. Highestpossibleloadfactorisguaranteedduetodesignanduseofforgedcomponents.

    Standard Series, to 47500 Nm

    Model No. Capacity Ratio Input output A B C C Weight* Square Square min max Nm Lbf/ft inch inch mm mm mm mm kg lbs

    BTM-5 2700 2000 5 3/4 1 136 135 89 260 8.40 18.48

    BTM-5/25 2700 2000 25 1/2 1 136 163 89 260 11.50 25.30

    BTM-6 3400 2500 5 3/4 1 1/2 136 149 105 260 9.20 20.24

    BTM-6/25 3400 2500 25 1/2 1 1/2 136 176 105 260 12.00 26.40

    BTM-7 6000 4500 5 3/4 1 1/2 168 174 115 310 18.00 39.60

    BTM-7/25 6000 4500 25 1/2 1 1/2 168 226 115 310 22.00 48.40Fitted with AWUR

    BTM-9/25 9500 7000 25 3/4 1 1/2 195 256 150 350 33.00 72.60Fitted with AWUR

    BTM-9/125 9500 7000 125 1/2 1 1/2 195 301 150 350 35.50 78.10Fitted with AWUR

    BTM-11/25 17000 12500 25 3/4 2 1/2 220 360 164 480 52.00 114.40Fitted with AWUR

    BTM-11/125 17000 12500 125 1/2 2 1/2 220 404 164 480 57.00 125.40Fitted with AWUR

    BTM-13/125 47500 35000 125 3/4 2 1/2 315 550 164 480 80.00 176.00Fitted with AWUR

  • www.cantorque.com 29

    Nano Series Torque Multiplier

    Slim Torque Multipliers

    Slim - Compact in Size

    Model No. Capacity Ratio Sq. Drive (inch) A B Weight (Kg)

    Kgm. Lbf/ft Nm Input output mm mm Without Box With Box

    NANO - 17 170 1250 1700 5:1 1/2 3/4 107 115 3.80 4.80

    NANO - 28 280 2033 2750 5:1 3/4 1 107 126 3.90 4.90

    Features:

    Compact,HeavyDutyTorqueMultiplierwithatorque multiplication of 5:1. Accuracybetterthan+4%withhighrepeatability. Providedwithdetachablereactionhandle. Optionaloffsetreactionarmalsoavailableondemand. Suppliedinsturdymoldedplasticcarryingcasefor better storage and handling.

    417107

    220

    B

    A

    STM-1 STM-2STM-3

    Features: CompactSize:Compactinsizehencecanbeusedinconstrainedareas. Ratio:Higherreductionratioforlowinput. Safety:Safetyshearpinattheinputprovisionedtopreventoverloading. AWUR:InbuiltAnti-WindupMechanismreducesoperatorseffort.Canbeusedwithnon-ratchettypetorquewrench. PinLock:PinLockmechanismatoutputSq.Driveforpositivelockingofsocket. ReactionArm:Differenttypeofreactionarmavailableasperuserrequirement. Accuracy:Betterthan+-4%withveryhighrepeatability.

    198A

    B

    C

    DD

    C

    B

    A

    Model STM-01 STM-02 STM-03

    A 81 88 88

    B 133-175 272 272

    C 165 141 151

    D 149 207 217

    Model No. Torque Capacity Reduction Sq. Drive o.D. Weight Recommended

    Nm Lbf/ft Kg m Ratio Input output mm kg Torque Wrench

    STM - 1 2500 1845 255 1 : 8 1/2 F 1 81 4.3 CTC-250

    STM - 2 3200 2362 326 1 : 10 1/2 F 1 88 6.3

    STM - 3 4200 3100 428 1 : 10 3/4 F 1 1/2 88 6.8 CTC-600

    Note: STM-2 and STM-3 are fitted with Anti-Wind-Up Ratchet (AWUR ) Mechanism. S TM-1 can be provided with AWUR .

  • 30 www.cantorque.com

    Power Splitters

    Features: Safe:Nosparks.Noflames.Norisktovolatilesurroundings.Nohammersorimpactneeded.Noflyingfragments. Fast:Cutsa3nutin20to30secondsvs.approx.20minuteswithahammer&chiselortorch. EasySetup:Youcanbeupandawayinlessthan5minutes. NoDamagetoboltorstudthreadsbycalibratingthechiselsothatonlythenutiscut. Versatile:Powersplitterscutthehardestnuts.

    F

    15

    D

    AB

    CS WING

    D

    E

    Features :Sa fe : No sparks . No ames . No risk to volatile surroundings. No hammers or impact needed. No ying fragments.Fast : Cuts a 3 nut in 20 to 30 seconds vs. approx. 20 minites with a hammer & chisel or torch.Easy Set up : You can be up and away in less than 5 minites.No Damage to bolt or stud threads by calibrating the chisel so that only the nut is cut.Versatile : Power splitters cut the hardest nuts. The range of models offered and the range of each model compares very favorablyvs. the competition.

    PS-105 11 - 22 16 - 36 38 271 60 10 38 105 10.65 23.40PS-200 22 - 32 7/8 - 1.1/4 36 - 51 1.7/16 - 2 38 287 45 13 54 108 11.25 24.80PS-204 32 - 38 1.1/4 - 1.1/2 46 - 60 1.13/16 - 2.3/8 57 385 30 14 64 164 35.65 78.40PS-210 35 - 45 1.3/8 - 1.3/4 57 - 70 2.1/4 - 2.3/4 57 398 30 18 73 164 36.55 80.40PS-308 45 - 57 1.3/4 - 2.1/4 70 - 89 2.3/4 - 3.1/2 78 460 30 19 99 214 75.15 165.30PS-314 50 - 64 2 - 2.1/2 79 - 98 3.1/8 - 3.7/8 80 488 30 22 108 214 82.00 180.40PS-404 64 - 70 2.1/2 - 2.3/4 95 - 108 3.3/4 - 4.1/4 95 579 60 29 118 251 106.00 233.30PS-500 76 - 83 3 - 3.1/4 114 - 127 4.1/2 - 5 105 590 60 29 137 251 110.50 243.10P S -506 83 - 8 9 3.1/4 - 3 .1/2 124 - 1 36 4.7/8 - 5 .3/8 105 598 60 29 149 251 108.45 238.60

    7/16 - 7/8 5/8 - 1.7/16

    ModelNo.

    WeightA B C D E FStudDiameter

    mm mm mmmm mmmm mminch inch kg lbs

    Nut A /FAcrossTheFlats

    Power Splitter

    ModelNo.

    WeightA B C D E FStudDiameter

    mm mm mm mm mm mm mminch inch kg lbs

    Nut A /FAcrossTheFlats

    Power Splitter Angle Headed

    PS-100AH 11 - 16 7/16 - 5/8 13 - 24 1/2 - 1 17.5 190 30 6 65 72 4.40 9.70PS-105AH 11 - 22 7/16 - 7/8 16 - 36 5/8 - 1.7/16 38 280 60 10 70 105 12.65 27.80PS-200AH 22 - 32 7/8 - 1.1/4 36 - 51 1.7/16 - 2 38 290 45 13 95 108 13.65 30.00PS-204AH 32 - 38 1.1/4 - 1.1/2 46 - 60 1.13/16 - 2.3/8 57 410 30 15 108 164 38.10 83.80PS-210AH 35 - 45 1.3/8 - 1.3/4 57 - 70 2.1/4 - 2.3/4 57 420 30 18 130 164 39.40 86.70PS-308AH 45 - 57 1.3/4 - 2.1/4 70 - 89 2.3/4 - 3.1/2 78 500 30 20 160 214 78.65 173.00PS-314AH 50 - 64 2 - 2.1/2 79 - 98 3.1/8 - 3.7/8 80 510 30 23 175 214 92.15 202.70

    For Removing Frozen Nuts the Right Way

    Power SplitterModel - PS-105toModel - PS-506

    Power Splitter Angle HeadedModel - PS-100AHtoModel - PS-314AH

    For removingfrozen nutsthe right way.Other anglesplittersizes quoted onrequest.

    F

    A

    S WING

    B

    C

    E

    D

    Power Splitters

    For Removing Frozen Nuts the Right Way

    Power Splitter Power Splitter Angle Headed

    Power Splitter

    Power Splitter Angle Headed

  • www.cantorque.com 31

    Power SplittersPower Splitters

    Note : Shades overlapping into multiple model numbers indicate common parts.

    1 Housing2 Set Screw3 Allen Wrench4 Chisel5 Chisel Holder6 Spacers Set7 Set Screw for Chisel Holder8 Allen Wrench for Chisel Holder9 Hydraulic Cylinder

    10 Quick Disconnect Female Coupler11 Allen Wrench for Cap Screws12 Socket Head Cap Screw (2 each)13 Handle for Housing (2)14 Hex Nut for Handle (2)15 Lifting Eye16 Tool Box (Not Shown)

    PS100

    Sr.No.

    DescriptionModel

    Type 2Type 1

    POWER SPLITTER with externally threaded chisel holders; used

    in nut splitters with internal threads in the piston rod.

    TYPE 1POWER SPLITTER that have a cylinder with threaded Bolt holes

    in the piston rod and chisels holders that use socket head cap screw.

    TYPE 2

    Power Splitter Part List :

    Versatile : One model cuts a wide range of nut sizes (6-8) Vs. 1-2 of the competition. Hydraulic Cylinders and other common parts amongmodels reduce inventory (refer parts list below for common parts).Flexible : Housing is designed to t virtually any application so you can work from more angles and in tighter spaces.Power Splitter ts all API and ANSI anges and all valve bonnets. It cuts virtually any shape nut (Hex, square and 12 point).Durable : Our heat treatment processes and cryogenic treatment of housings and chisels ensure life second to none. Chisels can beresharpened after dozens of cuts to prolong life.Precise : Chisel can be calibrated by using suitable holder to cut the nut wall precisely so that the bolt or stud does not get damaged.No damage to your equipment and no damage to your Power Splitter.Power : Power to weight ratio is the best in the industry and it is easier to handle.Economical : Price is among the most competitive available anywhere in the world.Warranty : For a full 6 months from defects in materials or workmanship.Variety of Pumps : Power splitter can be supplied with a variety of hand, foot operated, electric or air powered pumps.

    Please contact us for choices of available pumps.

    Power Splitter Vs. the competition :

    105413

    15

    14

    1 2

    3

    7

    89

    106512413

    15

    14

    1 2

    3

    11

    78 9

    This hand pump is specially designed for Splitter applications. The pump is compact and light in weight

    with longer handle needing very little eort to generate max working load.

    Model No.Max

    Pressure TypeOil Tank

    Cap. Size

    liters

    Flow Rate

    cmCT-HP10-1 700 2.8 Single Stage 1.8 56 x 16 x 19CT-HP10-2 700 2.8 Single Stage 2.2 71 x 16 x 20CT-HP14-2 950 2.8 Single Stage 2.2 71 x 18 x 20

    CT -HP10-3D 700 49/2.8 Double Stage 3.0 50 x 18 x 35CT -HP10-5D 700 49/2.8 Double Stage 5.0 50 x 18 x 35

    bar cc

    Hand Pumps

    PS105 PS200 PS204 PS210 PS308 PS314 PS404 PS500 PS506

    POWER SPLITTER with externally threaded chisel holders; used in nut splitters with internal threads in the piston rod.

    POWER SPLITTER that have a cylinder with threaded bolt holes in the piston rod and chisels holders that use socket head cap screw.

  • 32 www.cantorque.com

    Alignment Tools

    FunctionalThe FA1TM can be used during: commissioning construction routinemaintenance shutdowns/outages testing valvechange-outs

    Special Features useonvirtuallyallhorizontalandverticalflangesincludingANSI,API,BS,DIN&SPO operatesonmostpipeconfigurations aligningforceof1T(10kN) suitableforoffshoreandonshoreapplications robust grosskitweight1.6kg(35lbs) environmentallyfriendly

    Operating Benefits savestime savescost saferoperationthantraditionalmethods preciseoperation lightweight-idealforremotelocations

    FA1TM Mechanical Alignment ToolA SIMPLE SOLUTION TO SMALL, LOW PRESSURE FLANGE MISALIGNMENT

    FA4TM Mechanical Fixed Flange and Rotational Alignment Tool

    KIT COMPONENTS1 x FA1TM Tool

    1 x Ratchet Strap

    1 x Instruction Manual

    GrossKitWeight2.0kg(4.4lbs)

    ALIGNINGFORCE=1T(10kN)

    FunctionalThe FA4TM can be used during: commissioning construction routinemaintenance shutdowns/outages testing valvechange-outs

    Special Features rectifieslinearorrotationalmisalignment operatesonmostpipeconfigurations foruseonvirtuallyallhorizontalandverticalflangesincludingANSI,API,BS,DIN&SPO aligningforceof4T(40kN) suitableforoffshoreandonshoreapplications robust portable-only8.6kg(19lbs) environmentallyfriendly

    Operating Benefits savestime savescost laboursaving-allowsforcontinuityofwork safeoperation lightweight-idealforremotelocations dispenseswithneedforcranes,tirfors,hooks

    DESIGNED FOR MID-RANGE FLANGES

    KIT COMPONENTS1 x FA4TM Tool

    1 x 50 ft/lbs (67.8 Nm) Torque Wrench with 22mm Socket

    1 x Instruction Manual

    1 x Robust Carry Case with Protective Foam Inserts

    GrossKitWeight13.5kg(30lbs)

    ALIGNINGFORCE=4T(40kN)

  • www.cantorque.com 33

    FunctionalThe FA9TE can be used during: commissioning construction routinemaintenance shutdowns/outages testing valvechange-outs

    Special Features rectifieslinearorrotationalmisalignment designedforlargediameterhigh-pressureflanges operatesonmostpipeconfigurations useonhorizontalandverticalflangesincludingANSI,API,BS,DIN&SPO aligningforceof9T(90kN) suitableforoffshoreandonshoreapplications preciseoperation robust portable environmentallyfriendly

    Operating Benefits savestime savescost laboursaving-allowsforcontinuityofwork safeoperation idealforremotelocationsorconfinedareas dispenseswithneedforcranes,tirfors,hooks,come-alongs

    FA9TE Hydraulic Fixed Flange and Rotational Alignment Tool

    Alignment Tools

    Spreading Wedges

    Mg7TM Mini-gap Flange Spreader

    DESIgNED FoR HIgH-PRESSURE, LARgE DIAMETER FLANgES

    KIT CoMPoNENTS1 x FA9TE Tool

    1 x 10,000 psi (700 bar) 6 T Hydraulic Cylinder

    1 x 10,000 psi (700 bar) Hydraulic Hose 2m (78.75)

    1x10,000psi(700bar)HP350SSealedHandPumpwithGauge1 x Instruction Manual

    1 x Carry Case

    GrossKitWeight27.5kg(60lbs)

    ALIGNINGFORCE=9T(90kN)

    FunctionalTheMG7TMcanbeusedduring: commissioning construction routinemaintenance shutdowns/outages testing valvechange-outs

    Special Features innovativedoubleconfigurationdesigngivinggreaterrangeofapplication uniquedoubleangledwedgeproducesgreaterspreadingforcewithoutreducing spreading distance robustlightweighttool spreadingforceof6.8T(68kN) environmentallyfriendly requiresaccessgapofonly2mm

    Operating Benefits locksontoflangejoint safeoperation quickandeasyoperation savestime savescost portable

    KIT CoMPoNENTS1xMG7TMTool2 x Spreading Bar

    1 x Instruction Manual

    GrossKitWeight5kg(11.05lbs)

    SPREADINGFORCE=6.8T(68kN)

  • 34 www.cantorque.com

    Spreading Wedges

    SW9TM Mechanical Flange Spreader

    SW15TE Hydraulic Flange Spreader

    FunctionalThe SW9TM can be used during: commissioning construction routinemaintenance shutdowns/outages testing valvechange-outs

    Special Features uniqueinterlockingfirststep deep15mmsecureholdonfirststep requiresaccessgapofonly6mm robustlightweighttool spreadingforceof9T(90kN)from 150ft/lbs(203N/m)oftorque automaticmechanicalretraction measurableforce environmentallyfriendly

    Operating Benefits secureholdoneachstep quickandeasyoperation savestime savescost safeoperation portable

    Stepping Blocks2 x stepped blocks2 x M6 x 10 mm countersunk screws1 x 4 mm hex keyGrossweight1.5kg(3.5lbs)

    Less engagement, greater spreading.Sold as a seperate item in pairs

    KIT COMPONENTS1 x SW9TM Wedgehead

    1x150ft/lbs(203N/m)TorqueWrenchwith22mmSocket1 x Safety Block

    1 x Instruction Manual

    GrossKitWeight8.2kg(18.1lbs)

    SPREADINGFORCE=9T(90kN)

    FunctionalTheSW15TEcanbeusedduring: commissioning construction routinemaintenance shutdowns/outages testing valvechange-outs

    Special Features uniqueinterlockingfirststep deep15mmsecureholdonfirststep requiresaccessgapofonly6mm robustlightweighttool spreadingforceof15.5T(155kN)from 10,000 psi (700) of hydraulic pressure automaticmechanicalretraction environmentallyfriendly

    Operating Benefits secureholdoneachstep quickandeasyoperation savestime savescost safeoperation portable

    Stepping Blocks2 x stepped blocks2 x M6 x 10 mm countersunk screws1 x 4 mm hex keyGrossweight1.5kg(3.5lbs)

    Less engagement, greater spreading.Sold as a seperate item in pairs

    SPREADINGFORCE=15.5T(155kN)

  • www.cantorque.com 35

    Spreading Wedges

    SW15TE Hydraulic Flange Spreader

    SW14.5TI Integral Hydraulic Flange Spreader

    TheEqualizerTMuniqueinterlockingfirststepenhances safety giving secure holding from a small 6mm access gap.

    MiniKitComponents1xSW15TEWedgehead1 x 10,000 psi (700 bar) Hydraulic Cylinder1 x Safety Block1 x Instruction Manual

    GrossKitWeight7.5kg (16.5lbs)

    StandardKitComponents1xSW15TEWedgehead1 x 10,000 psi (700 bar) Hydraulic Hose, 2m(78.75)1 x 10,000 psi (700 bar) 10 T Hydraulic Cylinder1 x 10,000 psi (700 bar) HP350SSealedHand PumpwithGauge1 x Safety Block1 x Instruction Manual1 x Carry Case

    GrossKitWeight19kg(42lbs)

    Operating Benefits2xSW15TEWedgeheads2 x 10,000 psi (700 bar) Hydraulic Hoses, 2m(78.75)each2 x 10,000 psi (700 bar) 10 T Hydraulic Cylinders1 x 10,000 psi (700 bar) HP350DSealedHand PumpwithGauges2 x Safety Blocks1 x Instruction Manual1 x Carry Case

    GrossKitWeight30kg (66.1 lbs)

    FunctionalTheSW14.5TIcanbeusedduring: commissioning construction routinemaintenance shutdowns/outages testing valvechange-outs topsideorsubseawork

    Special Features compactbuilt-inpump uniqueinterlockingfirststep deep15mmsecureholdonfirststep requiresaccessgapofonly6mm robust,lightweighttoolwith carry strap 10,000psi(700bar)generates spreadingforceof14.5T(145kN) automaticmechanicalretraction carrystrap environmentallyfriendly

    Operating Benefits secureholdoneachstep quickandeasytouse savestime savescost safeoperation portable

    Stepping Blocks2 x stepped blocks2 x M6 x 10 mm countersunk screws1 x 4 mm hex keyGrossweight1.5kg(3.5lbs)

    Less engagement, greater spreading.Sold as a seperate item in pairs

    KIT COMPONENTS1xSW14.5TIWedgehead1x10,000psi(700bar)10TIntegralHydraulicPump/Cylinder1 x Safety Block

    1 x Carry Strap

    1 x Instruction Manual

    1 x Carry Case

    GrossKitWeight14kg(28.6lbs)

    SPREADINGFORCE=14.5T(145kN)

  • 36 www.cantorque.com

    Secure-Grip Spreading Tools

    Sg4TM | Sg6TM | Sg11TM Secure-grip Mechanical Flange Spreaders

    FunctionalTheSecure-Gripcanbeusedduring: commissioning construction routinemaintenance shutdowns/outages testing valvechange-outs subseawork

    Special Features uniqueexpandingcollettechnology littleornoaccessgaprequired securebolt-holelockingmechanism SG4TM:spreadingforceof3.7T(37kN),spreadingdistanceof80mm(3.15) SG6TM:spreadingforceof6T(60kN),spreadingdistanceof80mm(3.15) SG11TM:spreadingforceof11T(110kN),spreadingdistanceof90mm(3.55) environmentallyfriendly

    Operating Benefits uniquetechnologymakestheSecure-Griparguablythesafestflangespreader in the world today virtuallyuniversal,theSecure-GriprangewillcoverANSI,DIN,SPO,ASME,APIand BS flanges time-saving,simpleoper