capacitorr® d 50, d 100, d 200 - saes getters · 2019-03-15 · capacitorr® d 50, d 100, d 200...
TRANSCRIPT
CapaciTorr®
D 50, D 100,
D 200
General Features
� High pumping speed for all active
gases
� High sorption capacity and increased
lifetime
� Costant pumping speed in HV, UHV
and XHV
� Reversible pumping of hydrogen and
its isotopes
� Possibility of operation at room
temperature after activation, without
power
� Operation in the presence of high
magnetic fields
� Oil free and vibration free in ultra
high vacuum
� Low weight
Applications
� Improving ultimate vacuum in
combination with ion, diffusion,
cryogenetic or turbomolecular pumps
� Surface analysis systems
� Particle accelerators, synchrotron
radiation sources and related
equipment
� Process pumps for vacuum devices and
deposition chambers
� Portable vacuum instrumentation
� Pumping, storing and releasing
hydrogen isotopes
� Impurities removal in rare gas filled
devices
HIGHLIGHTS
Ordering Information
Product Product description Code
CapaciTorr D 50 Pump CapaciTorr D 50 5H0166
CapaciTorr D 100 Pump CapaciTorr D 100 5H0163
CapaciTorr D 200 Pump CapaciTorr D 200 5H0168
Power Supply and Cables
Product Product description Code
D 50 Power Supply CapaciTorr CF 35 D 50 Power Supply 3B0384
D 100 Power Supply CapaciTorr CF 35 D 100 Power Supply 3B0385
D 200 Power Supply CapaciTorr CF 35 D 200 Power Supply 3B0402
Output Cable Cable supply output CF35 D50/D100/D200 3MT 3B0386
Input Cable Cable Mains input CF35 3MT 3B0338
Dimensions in mm
The CapaciTorr® D 50, D 100 and D 200 are three miniature pumps that complement the
CapaciTorr family line providing large performance in an extremely compact volume.
In spite of their minimal chamber intrusion (less than 100, 200 and 300 cc respectively)
and small weight (~300 ‐ 400 g) they feature impressive pumping speed for H2
and the
other active gases present in UHV or XHV systems like H2O, O
2, CO
2, CO and N
2.
This result is achieved through the adoption of a novel special pump design and the use
of the high performance SAES® St 172 sintered porous getter disks.
All pumps come on a standard CF 35 flange and have a built‐in heater that directly
connects to the flange power feed‐through (bakeable up to 400 °C). A suitable connector
provides an easy and fast connection to the pump power supply for the activation
purposes.
Only minimal power consumption (30, 45 and 60 W for ~1 hour, respectively) is required
during the activation. No power is necessary during normal UHV‐XHV operation at room
temperature. Like other NEG (Non Evaporable Getter) pumps they are vibration free and
can operate in presence of high magnetic fields.
These pumps are therefore the perfect choice in applications where space and weight
constraints, absence of vibration and minimal electromagnetic interference must be
coupled to excellent pumping performances and UHV ‐ XHV standards.
oupgr
making innovat ion happen, together
Capacitorr Pumps Scheda D50_100_200_Layout 1 28/01/2016 11:47 Pagina 1
CapaciTorr®
D 50, D 100,
D 200
© SAES Group. Printed in Italy. All rights reserved. SAES®
and CapaciTorr®
are registered trademarks of SAES Group.
SAES Group reserves the right to change or modify product specifications at any timewithout notice.
D.VS.110.4.16
Typical Pump Characteristics
CapaciTorr
D 50
CapaciTorr
D 100
CapaciTorr
D 200
Alloy Type St 172 St 172 St 172
Alloy Composition ZrVFe ZrVFe ZrVFe
Getter Mass (g) 7.8 13.5 28
Getter Surface (cm2) 66 114 238
Pumping Speed (l/s)
H2
55 100 200
CO 30 60 140
Sorption Capacity
(Torr�l)
H2
78 135 280
CO at 25 °C 0.1 0.2 0.56
CO total 70 120 252
Note: Pumping speed data refer to the initial values of the pump.
CO capacity based on speed below 8 l/s (D 50) and10 l/s (D 100 and D 200) in nude configuration.
Note:The voltage and current vs temperature data, displayed in the graph, have been achieved in nude
configuration (NEG Cartridge completely immersed in the chamber).
0,1
1
10
100
1000
0,0001 0,001 0,01 0,1 1
CapaciTorr® D50, D100 and D200
sorption test (according to ASTM F798-97)
Sorbed Quantity (Torr · l )
Pu
mp
in
g S
pe
ed
(l/s
)
CapaciTorr D50 CapaciTorr D100 CapaciTorr D200
Sorption Temperature: 25°C
Activation:60' @ 7.5 V - 30W (D50)
9 V - 45 W (D100)
12 V - 60W (D200)
Sorption pressure: 3E-6 Torr
CO
H2
0
2
4
6
8
10
12
14
16
0
2
4
6
8
10
12
0 100 200 300 400 500 600 700
CapaciTorr D100
CapaciTorr D200
CapaciTorr D50
Heating parameters
Vo
lta
ge
(V
)
Temperature (°C)
Current (A)Voltage (V)
Cu
rre
nt (A
)
The SAES Group manufacturing
companies are ISO9001
certified and the Italian
companies are also ISO14001
certified. Full information
about our certifications for
each company of the Group
are available on our website at:
www.saesgroup.com
SAES Group
www.saesgroup.com
neg_technology@saes‐group.com
oupgr
Capacitorr Pumps Scheda D50_100_200_Layout 1 28/01/2016 11:47 Pagina 2
CapaciTorr®
D 400‐2
General Features
� High pumping speed for all active
gases
� High sorption capacity and increased
lifetime
� Costant pumping speed in HV, UHV
and XHV
� Reversible pumping of hydrogen and
its isotopes
� Possibility of operation at room
temperature after activation, without
power
� Operation in the presence of high
magnetic fields
� Oil free and vibration free in ultra
high vacuum
� Low weight
Applications
� Improving ultimate vacuum in
combination with ion, diffusion,
cryogenetic or turbomolecular pumps
� Surface analysis systems
� Particle accelerators, synchrotron
radiation sources and related
equipment
� Process pumps for vacuum devices and
deposition chambers
� Portable vacuum instrumentation
� Pumping, storing and releasing
hydrogen isotopes
� Impurities removal in rare gas filled
devices
The CapaciTorr® D 400‐2 pump uses the high performing St 172 (Zr‐V‐Fe) material in the
form of disks to achieve high pumping performances in a very compact configuration. It
is ideal when maximum pumping speed is needed in a small package. The getter cartridge
has a built‐in heater that directly connects to the flange power feedthrough. A bakeable
connector provides an easy and fast connection to the pump power supply for activation
purposes. The CapaciTorr D 400‐2 pump offers its best performances when mounted
directly in the vacuum system using the standard CF 35 flange. Alternatively the pump
can be mounted as an appendage using a custom‐made pump body. The pumping speed
curves related to different mounting positions and the activation curves are shown in the
following page.
HIGHLIGHTS
Ordering Information
Product Product description Code
Base flange with Connector CapaciTorr CF 35 4H0402
Base flange with Connector and Body CapaciTorr CF 35 J 4H0423
St 172 Cartridge with built‐in Heater C 400‐2 DSK 4H0419
Pump Body Body CapaciTorr CF 35 4H0401
Power supply and cables
Product Product description Code
Pump Power Supply CapaciTorr CF 35 D 400/B 200 Power Supply 3B0389
Input Cable Cable Mains Input CF 35 3Mt 3B0338
Output Cable Cable Supply Output CF35 D 400/B 200 3Mt 3B0390
oupgr
making innovat ion happen, together
Dimensions in mm
Capacitorr Pumps Scheda D400_2_Layout 1 28/01/2016 12:08 Pagina 1
CapaciTorr®
D 400‐2
D.VS.111.5.16
Typical Pump Characteristics CapaciTorr D 400‐2
Alloy Type St 172
Alloy Composition ZrVFe
Getter Mass (g) 45
Getter Surface (cm2) 380
Pumping Speed (l/s)
H2
400
CO 180
Sorption Capacity
(Torr�l)
H2
450
CO at 25 °C 0.9
CO total 400
Note: Pumping speed data refer to the initial values of the pump without the pump body. CO
capacity based on speed below 20 l/s in nude configuration.
Note: The voltage and current vs temperature data, displayed in the graph, have been achieved in nude
configuration (NEG Cartridge completely immersed in the chamber).
1
2
3
4
5
6
0
2
4
6
8
10
12
14
16
18
20
50 150 250 350 450 550
Heating parameters
Vo
lta
ge
(V
)
Cu
rre
nt (A
)
Temperature (°C)
Current (A)Voltage (V)
1
10
100
1000
0 ,001 0 ,01 0 ,1 1 10
CapaciTorr® D400‐2
sorption test (according to ASTM F798‐97)
Sorbed Quantity (Torr ∙ l )
Pu
mp
in
g S
pe
ed
(l/s)
Sorption Temperature: 25°C
Activation:60' @ 15.75 V (85 W)
Sorption pressure: 3E‐6 Torr
CO
H2
N2
with bodynude
© SAES Group. Printed in Italy. All rights reserved. SAES®
and CapaciTorr®
are registered trademarks of SAES Group.
SAES Group reserves the right to change or modify product specifications at any timewithout notice.
The SAES Group manufacturing
companies are ISO9001
certified and the Italian
companies are also ISO14001
certified. Full information
about our certifications for
each company of the Group
are available on our website at:
www.saesgroup.com
SAES Group
www.saesgroup.com
neg_technology@saes‐group.com
oupgr
Capacitorr Pumps Scheda D400_2_Layout 1 28/01/2016 12:08 Pagina 2
General Features
� High pumping speed for all active
gases
� High sorption capacity and increased
lifetime
� Costant pumping speed in HV, UHV
and XHV
� Reversible pumping of hydrogen and
its isotopes
� Possibility of operation at room
temperature after activation, without
power
� Operation in the presence of high
magnetic fields
� Oil free and vibration free in ultra
high vacuum
� Low weight
Applications
� Improving ultimate vacuum in
combination with ion, diffusion,
cryogenetic or turbomolecular pumps
� Surface analysis systems
� Particle accelerators, synchrotron
radiation sources and related
equipment
� Process pumps for vacuum devices and
deposition chambers
� Portable vacuum instrumentation
� Pumping, storing and releasing
hydrogen isotopes
� Impurities removal in rare gas filled
devices
The CapaciTorr® D 1000 pump uses highly porous St 172 sintered getter disks (Zr‐V‐Fe
alloy). The pump is able to reach 1000 l/s pumping speed for hydrogen in UHV conditions.
The St 172 getter cartridge is mounted on a heater structure using a single heater
element, and it is available on CF63 and CF100 flanges. The flanges (AISI 316 LN) are
conveniently supplied with a custom made bakeable electrical connector which combines
power and thermocouple pins, for best integration and minimum footprint. St 172
material offers superior gas diffusivity characteristics and allows operation at room or
intermediate temperatures (200 °C) to increase the sorption capacity in presence of high
gas loads. The pump sorption speed is at its maximum when the pump is mounted
directly in the vacuum system without a body. The pumping speed curves related to
different mounting positions and the activation curves are shown in the enclosed graphs.
HIGHLIGHTS
Ordering Information
Product Product description Code
St 172 Cartridge with built‐in Heater CapaciTorr D 1000 4H0468
CF63 base flange with Connector CapaciTorr base flange CF63 4H0467
CF100 base flange with Connector CapaciTorr base flange CF100 4H0469
Pump Body CF63 Body CF63 4H0241
Pump Body CF100 Body CF100 4H0224
CapaciTorr®
D 1000
Dimensions in mm
oupgr
making innovat ion happen, together
Capacitorr Pumps Scheda D1000_bis_Layout 1 28/01/2016 11:56 Pagina 1
CapaciTorr®
D 1000
D.VS.112.4.16
Typical Pump Characteristics CapaciTorr D 1000
Alloy Type St 172
Alloy Composition ZrVFe
Getter Mass (g) 136
Getter Surface (cm2) 1140
Pumping Speed (l/s)
H2
1000
CO 600
Sorption Capacity
(Torr�l)
H2
1360
CO at 25 °C 4
CO total 1224
Note: Pumping speed data refer to the initial values of the pump without the pump body. CO
capacity based on speed below 30 l/s in nude configuration.
Note:The voltage and current vs temperature data, displayed in the graph, have been achieved in nude
configuration (NEG Cartridge completely immersed in the chamber).
0,1
1
10
100
1000
10000
0,01 0,1 1 10 100
CapaciTorr® D1000
sorption test (according to ASTM F798‐97)
Sorbed Quantity (Torr ∙ l )
Pu
mp
in
g S
pe
ed
(l/s)
Sorption Temperature: 25°C
Activation:60' @ 50 V (210 W)
Sorption pressure: 3E‐6 Torr CO
H2
N2
0
0,5
1
1,5
2
2,5
3
3,5
4
4,5
5
0
10
20
30
40
50
60
0 100 200 300 400 500 600 700
Heating parameters
Vo
lta
ge
(V
)
Cu
rre
nt (A
)
Temperature (°C)
Current (A)Voltage (V)
© SAES Group. Printed in Italy. All rights reserved. SAES®
and CapaciTorr®
are registered trademarks of SAES Group.
SAES Group reserves the right to change or modify product specifications at any timewithout notice.
The SAES Group manufacturing
companies are ISO9001
certified and the Italian
companies are also ISO14001
certified. Full information
about our certifications for
each company of the Group
are available on our website at:
www.saesgroup.com
SAES Group
www.saesgroup.com
neg_technology@saes‐group.com
oupgr
Power supply and cables
Product Product description Code
Pump Power Supply NEG POWER C1* 3B0501
Output Cable Cable supply output with K‐TC/3Mt‐V1.1‐HT** 3B0420
* Other NEG POWER models which can simultaneously activate up to four pumps are available
** Other cables lenghts are available on request
Capacitorr Pumps Scheda D1000_bis_Layout 1 28/01/2016 11:56 Pagina 2
General Features
� High pumping speed for all active
gases
� High sorption capacity and increased
lifetime
� Costant pumping speed in HV, UHV
and XHV
� Reversible pumping of hydrogen and
its isotopes
� Possibility of operation at room
temperature after activation, without
power
� Operation in the presence of high
magnetic fields
� Oil free and vibration free in ultra
high vacuum
� Low weight
Applications
� Improving ultimate vacuum in
combination with ion, diffusion,
cryogenetic or turbomolecular pumps
� Surface analysis systems
� Particle accelerators, synchrotron
radiation sources and related
equipment
� Process pumps for vacuum devices and
deposition chambers
� Portable vacuum instrumentation
� Pumping, storing and releasing
hydrogen isotopes
� Impurities removal in rare gas filled
devices
The CapaciTorr® D 2000 MK5 pump is the highest performing pump of the CapaciTorr
series. With the use of a special highly porous sintered Zr‐V‐Fe getter material, St 172, the
pump is able to reach 2000 l/s pumping speed for hydrogen in UHV conditions. The St 172
getter cartridge is mounted on a heater structure using a single heater element, and it is
available on CF100 and CF150 flanges. The flanges (AISI 316 LN) are conveniently
supplied with a custom made bakeable electrical connector which combines power and
thermocouple pins, for best integration and minimum footprint. St 172 material offers
superior gas diffusivity characteristics and allows operation at room or intermediate
temperatures (200 °C) to increase the sorption capacity in presence of high gas loads. The
pump sorption speed is at its maximum when the pump is mounted directly in the
vacuum system without a body. The pumping speed curves related to different mounting
positions and the activation curves are shown in the enclosed graphs.
HIGHLIGHTS
Ordering Information
Product Product description Code
Base flange with Connector and Heater CapaciTorr CF100 MK5 4H0439
Base flange with Connector and Heater CapaciTorr CF150 MK5 4H0438
Base flange with Connector, Heater and Body CapaciTorr CF100 MK5 J 4H0441
Base flange with Connector, Heater and Body CapaciTorr CF150 MK5 J 4H0442
St 172 Getter Cartridge C 2000 DSK 4H0418
CapaciTorr®
D 2000
Dimensions in mm
oupgr
making innovat ion happen, together
Capacitorr Pumps Scheda D2000_bis_Layout 1 28/01/2016 12:10 Pagina 1
CapaciTorr®
D 2000
D.VS.113.4.16
Typical Pump Characteristics CapaciTorr D 2000
Alloy Type St 172
Alloy Composition ZrVFe
Getter Mass (g) 225
Getter Surface (cm2) 1900
Pumping Speed (l/s)
H2
2000
CO 1000
Sorption Capacity
(Torr�l)
H2
2250
CO at 25 °C 5
CO total 2000
Note: Pumping speed data refer to the initial values of the pump without the pump body. CO
capacity based on speed below 50 l/s in nude configuration.
Note:The voltage and current vs temperature data, displayed in the graph, have been achieved in
nude configuration (NEG Cartridge completely immersed in the chamber).
1
10
100
1000
10000
0,001 0,01 0,1 1 10
CapaciTorr® D2000
sorption test (according to ASTM F798‐97)
Sorbed Quantity (Torr ∙ l )
Pu
mp
in
g S
pe
ed
(l/s)
Sorption Temperature: 25°C
Activation:45' @ 110 V (495 W)
Sorption pressure: 3E‐6 Torr
CO
H2
N2
0
1
2
3
4
5
6
0
20
40
60
80
100
120
50 150 250 350 450
Heating parameters
Vo
lta
ge
(V
)
Cu
rre
nt (A
)
Temperature (°C)
Current (A)Voltage (V)
CF100 bodynude
© SAES Group. Printed in Italy. All rights reserved. SAES®
and CapaciTorr®
are registered trademarks of SAES Group.
SAES Group reserves the right to change or modify product specifications at any timewithout notice.
The SAES Group manufacturing
companies are ISO9001
certified and the Italian
companies are also ISO14001
certified. Full information
about our certifications for
each company of the Group
are available on our website at:
www.saesgroup.com
SAES Group
www.saesgroup.com
neg_technology@saes‐group.com
oupgr
Power supply and cables
Product Product description Code
Pump Power Supply NEG POWER C1* 3B0501
Output Cable 3Mt lenght Cable supply output V1.1‐5 3Mt** 3B0337
* Other NEG POWER models which can simultaneously activate up to four pumps are available
** Other cables lenghts are available on request
Capacitorr Pumps Scheda D2000_bis_Layout 1 28/01/2016 12:10 Pagina 2
General Features
�High pumping speed for all active gases
�High sorption capacity and increased
lifetime
�Costant pumping speed in HV, UHV and
XHV
�Reversible pumping of hydrogen and its
isotopes
�Possibility of operation at room
temperature after activation, without
power
�Operation in the presence of high
magnetic fields
�Oil free and vibration free in ultra high
vacuum
�Low weight
Applications
� Improving ultimate vacuum in
combination with ion, diffusion,
cryogenetic or turbomolecular pumps
� Surface analysis systems
� Particle accelerators, synchrotron
radiation sources and related
equipment
� Process pumps for vacuum devices and
deposition chambers
� Portable vacuum instrumentation
� Pumping, storing and releasing
hydrogen isotopes
� Impurities removal in rare gas filled
devices
The CapaciTorr® D 3500 pump is the highest performing pump of the CapaciTorr series.
With the use of a special highly porous sintered Zr‐V‐Fe getter material, St 172, the pump
is able to reach 3600 l/s pumping speed for hydrogen in UHV conditions. The St 172
getter cartridge is mounted on a heater structure using a single heater element, and it
comes on CF150 or CF200 flanges. The flanges (AISI 316 LN) are conveniently supplied
with a custom made bakeable electrical connector which combines power and
thermocouple pins, for best integration and minimum footprint. St 172 material offers
superior gas diffusivity characteristics and allows operation at room or intermediate
temperatures (200 °C) to increase the sorption capacity in presence of high gas loads. The
pump sorption speed is at its maximum when the pump is mounted directly in the
vacuum system without a body. The pumping speed curves related to different mounting
positions are shown in the attached graph.
HIGHLIGHTS
oupgr
Ordering Information
Product Product description Code
Base flange with Connector and Heater CapaciTorr Base Flange CF150 4H0480
Base flange with Connector and Heater CapaciTorr Base Flange CF200 4H0482
Pump body CF150/CF200 Special body CF150/CF200 4H0233
Pump body CF200/CF250 Special body CF200/CF250 4H0234
St 172 Getter Cartridge CapaciTorr D3500 4H0481
CapaciTorr®
D 3500
Dimensions in mm
making innovat ion happen, together
Capacitorr Pumps Scheda D3500_Layout 1 28/01/2016 12:19 Pagina 1
CapaciTorr®
D 3500
The SAES Group manufacturing
companies are ISO9001
certified and the Italian
companies are also ISO14001
certified. Full information
about our certifications for
each company of the Group
are available on our website at:
www.saesgroup.com
SAES Group
www.saesgroup.com
neg_technology@saes‐group.com© SAES Group. Printed in Italy. All rights reserved. SAES
® and CapaciTorr
®are registered trademarks of SAES Group.
SAES Group reserves the right to change or modify product specifications at any timewithout notice.
oupgr
D.VS.114.2.16
Typical Pump Characteristics CapaciTorr D 3500
Alloy Type St 172
Alloy Composition ZrVFe
Getter Mass (g) 395
Getter Surface (cm2) 2964
Pumping Speed (l/s)
H2
3600
H2O 2700
CO 1800
N2
1000
Sorption Capacity
(Torr�l)
H2
3950
CO at 25 °C 12
CO total 3100
Note: Pumping speed data refer to the initial values for the pump without in nude configuration.
CO capacity based on a minimum sorption speed of 100 l/s in nude configuration.
Power supply and cables
Product Product description Code
Pump Power Supply NEG POWER C1* 3B0501
Output Cable 3Mt lenght Cable supply output V1.1‐5 3Mt** 3B0337
1
10
100
1000
10000
0,001 0,01 0,1 1 10 100
CapaciTorr® D3500
sorption test (according to ASTM F798‐97)
Sorbed Quantity (Torr ∙ l )
Pu
mp
in
g S
pe
ed
(l/s)
Sorption Temperature: 25°C
Activation:60' @ 92,4V(365 W)
Sorption pressure: 3E‐6 TorrCO
H2
N2
with body 250mm (CF200/CF250)nude configuration
0
1
2
3
4
5
6
0
20
40
60
80
100
120
0 100 200 300 400 500 600
Heating parameters
Temperature (°C)
Vo
lta
ge
(V
)
Current (A)Voltage (V)
Cu
rre
nt (A
)
H2O
O2
* Other NEG POWER models which can simultaneously activate up to four pumps are available
** Other cables lenghts are available on request
Capacitorr Pumps Scheda D3500_Layout 1 28/01/2016 12:19 Pagina 2
Power Supplies for CapaciTorr® D 400‐2, D 200, D 100 and D 50
The CapaciTorr CF35 Power Supplies are electronic units specifically designed for
controlling the activation process of the CapaciTorr D 400‐2, CapaciTorr D 200,
CapaciTorr D 100 and CapaciTorr D 50 getter pumps. The instruments receive line voltage
(110 ‐ 240 VAC
, 50‐60 Hz), convert it to DC voltage of (8.6 ‐16.5) VDC
and supply the getter
pumps by way of a microprocessor‐based electronic control card.
The instruments are designed to control the getter pumps in three different modes:
Activation
Timed‐Activation
Conditioning.
In the activation mode, the instruments supply the power necessary to heat up the getter
pump to the activation temperature (~500°C). In this operating mode, the CapaciTorr CF
35 power supplies deliver 100% of the available power.
In the timed activation mode, the instruments supply the power necessary to heat up the
getter pump to the activation temperature (~500°C) for one hour. In this operating mode,
the CapaciTorr CF 35 power supplies deliver 100% of the available power.
In the conditioning mode, the instruments supply the power necessary to heat up the
getter pump to the conditioning temperature (~150°C – 200 °C). In this operating mode,
the CapaciTorr CF 35 power supplies deliver 30% of the available power, using a duty
cycle control.
HIGHLIGHTS
oupgr
Ordering Information
Product description Code
CapaciTorr CF 35 D 50 Power Supply 3B0384
CapaciTorr CF 35 D 100 Power Supply 3B0385
CapaciTorr CF 35 D 200 Power Supply 3B0402
CapaciTorr CF 35 D 400/B200 Power Supply 3B0389
Cable supply output CF35 D50/D100/D200 3MT* 3B0386
Cable supply output CF35 D400/B200 3MT* 3B0390
Cable mains input CF 35 3Mt 3B0338
CapaciTorr®
CF35 Power
Supplies
making innovat ion happen, together
*Other cables lenghts available on request
Line Voltage
�Supply voltage: 110‐240 VAC
�Frequency: 50‐60 Hz
�Mains cord connector: IEC Type 6A 250V
�Over‐voltage class: Cat II
Line Protection Required
�Supply protection: 6 A Fuse or Circuit
Breaker
�Differential switch: 30 mA
� Isolation type: Class I
Output
�Output voltage VDC
: (8.6‐ 16.5) V
�Output power : (4.0 ‐ 6.0) A
Instrument Protection
� Internal line fuse: (2.0‐3.5) A T
�Overload protection: Electronic control
�High Temp. Protection: Electronic control
Dimensions
�72 x 144 x 300 mm (HxWxD)
Weight
�2,1 kg
�
�
�
Capacitorr and gp power supply datasheet_Layout 1 28/01/2016 14:46 Pagina 1
Input:
£Maximum power: 3.5 kW
£Supply voltage: 100-240 VAC, ±10%
£Frequency: 50-60 Hz, ±10%
£ Input current: 20 A / 110 VAC - 14 A / 230 VAC
£Mains cord connector: IEC Type 16A 250 V
Output 1-4 at 110 V
£Power: 700 W + overload
£Voltage: 10-110 VDC
£Overload: 110% for one minute
£Current: 10 A
Output 1-4 at 25 V - LP VERSION
£Power: 150 W + overload
£Voltage: 0-30 VDC
£Overload: 110 % for one minute
£Current: 5 A
Main features of NEG POWER
£ Simultaneous activation/conditioning ofup to 4 NEG pumps
£ Local control by touch screen
£ Remote control on Ethernet/RS232/RS485interfaces with Modbus protocol
£ Free Windows and Linux remote controlsoftware
£ Temperature monitoring and regulation
£Automatic power regulation for differentpump configurations (for pumps equippedwith a thermocouple)
NEG POWER
Multicontroller
making innovat ion happen, together
Multicontroller for all SAES® NEG pumps
NEG POWER is a control unit specifically designed to control the activation and conditioning
processes of all SAES NEG pumps (see the table below).
NEG POWER can simultaneously control up to four different SAES NEG pumps.
NEG POWER provides:
Adjustable DC voltage, up to 110 V (up to 25 V – LP version)
Current up to 10 A (up to 5 A – LP version)
Power up to 700 W per channel (up to 150 W – LP version)
LAN, RS232 or RS485 remote control
NEG POWER can be operated locally by a touch screen, or can be remotely controlled with Modbus
protocol over Ethernet, RS232 or RS485 interfaces.
Default activation/conditioning parameters for all SAES NEG pumps are available in the setting
menu. Custom parameters can be set as well.
(*) Other length cables are available on request
(§) Bakeable cables up to 250 °C, and radiation resistant (1000 Mrad)
n
n
n
n
HIGHLIGHTS
oupgr
Ordering Information
Product description Code Pump Models
NEG POWER C1 3B0501CapaciTorr: D 1000, D 2000, D 3500,
HV 1600, HV 2100;
NEXTorr: D 500, D 1000, D 2000
GP: GP 100, GP 200, GP 500;
NEG modules: HV 800, UHV 1400.
NEG POWER C2 3B0502
NEG POWER C3 3B0503
NEG POWER C4 3B0504
NEG POWER LP C1 3B0521 CapaciTorr: D 50, D 100, D 200, D 400,
Z 100, Z 200, Z 400, HV 200;
NEXTorr: D 100, D 200, D 300, D 500,
Z 100, Z 200, Z 300, HV 100, HV 200,
HV 300;
GP: GP 50, GP 100;
NEG modules: HV 400, UHV 700.
NEG POWER LP C2 3B0522
NEG POWER LP C3 3B0523
NEG POWER LP C4 3B0524
NEG cable 3P5A 3MT*§ 3B0598
Capacitorr D 50, D 100,
D 200, Z 100, Z 200;
NEXTorr D 100, D 200,
Z 100, Z 200, HV 100, HV 200.
NEG cable 4P10A 3MT*§ 3B0601 Capacitorr D 400, Z 400, HV 200
NEG cable 6P5A 3MT*§ 3B0854
NEXTorr D 300, D 500, D 1000, D 2000,
Z 300, HV 300;
Capacitorr D 1000.
NEG cable 6P10A 3MT*§ 3B0602Capacitorr D 2000, D 3500;
GP 100, GP 200, GP 500.
NEG cable for GP50 3MT* 3B0370 GP 50.
NEG POWER MINI_Layout 1 27/02/2019 08:17 Pagina 2