cape training brochure_asia pacific rim offshore

8/2/2019 Cape Training Brochure_asia Pacific Rim Offshore

1/20

40 Cape Training and Assessment Centre Cape Training and Assessment Centre 01

www.capeplc.com

CapeTraining andAssessment CentreOshore Far EastPacic Rim

For more information on our

Cape Training and Assessment

Centre courses, please contact us:

Cape plcHead ofce

9 The Square, Stockley Park

Uxbridge, Middlesex

UB11 1FW

Tel + 44 (0)20 3178 5498

Cape AustraliaBrisbane

106-110 Harburg Drive,

Beenleigh QLD 4207

Tel +61 7 3297 4900Fax + 61 7 3807 8455

Darwin

5 Mander Road (Part)

Holtze (Darwin) NT 0829

Tel +61 8 8932 2237

Fax +61 8 8932 2289

Melbourne

2 Regent Avenue

Springvale VIC 3171

Tel +61 3 9549 9999Fax +61 3 9549 9944

Perth

89 Ofce Road

Kwinana WA 6167

Tel +61 8 9419 0421

Fax +61 8 9419 5070

Email [email protected]

Cape BruneiG14/G15/G16 Komplek Harapan,

Lot No. 3038, Jalan Setia Di-Raja,

Kuala Belait KA3131,

Negara Brunei Darussalam

Tel +673 334 7055

Fax +673 334 7029

Cape PhilippinesWarehouse #2-A

Sunblest Compound

KM 23 West Service Road

Barangay Cupang

Muntinlupa City

Philippines 1771

Tel +63 2 994 3806

Email [email protected]


2/20

02 Cape Training and Assessment Centre

Cape conductstraining in linewith robustinternationalstandards

Cape

Training andAssessment Centre

04 Skills Training and Assessment

Courses

06 Basic Scaffolding (Australian

Standard)

07 Intermediate and Advanced

Scaffolding (Australian Standard)

08 CISRS Basic Scaffolding Part 1

09 CISRS Basic Scaffolding Part 2

10 CISRS Scaffolder Skills Test

11 Scaffold Inspection

12 Blasting and Painting

13 Insulation14 Welder Testing and Training

15 Manual Handling

16 Conned Space Entry Awareness

17 Conned Space Entry Training

18 IRATA Rope Access L evel 1

19 IRATA Rope Access Level 2 and 3

20 Working at Heights Safely

21 Safety Harness Use and

Inspection

22 Rescue and Retrieval Training

23 Basic First Aid

24 Rigging and Slinging

25 Forklift Truck

26 Safety Representative Training

27 Basic Fireghting

28 Elevated Work Platform

29 Abrasive Wheels

30 Health and Safety in the Workplace

31 Safety Passport

32 Control of Substances Hazardous

to Health

33 Environmental Awareness

34 Accident/Incident Investigation

and Reporting

35 Permit to Work

36 IOSH - Managing Safely

37 IOSH - Working Safely

38 Task Analysis - Hazard ID and Risk

Assessment


3/20


Skills Training and Assessment

Training plays a undamental role in ensuringCape remains a leading service solutionsprovider to industry. In addition to rigoroustraining and continuous assessment o our

own people, we oer external programmesthat help our clients to attain the sameindustry leading standards.

Training for top performance

Cape conducts training in li ne with robust international

standards. The trainers and assessors who carry out this

work are selected for their professional training credentials

and proven industrial experience. Cape clients can tap into

this valuable pool of expertise to ensure their own employees

and other contractors adhere to the same industry leading

standards.

Competency assessment

Cape professionals are qualied to provide competencyassessment across a comprehensive range of disciplines.

These assessments can be used for recruitment, initial project

mobilisation or as part of re-certication.

As safety is a cornerstone of our business, we include safety

content as standard within all our training courses.

Cape is able toprovide the idealsolution or anytraining, learningor assessment

situation


4/20


Intermediate and Advanced Scaolding(Australian Standard)

The Intermediate and Advanced Scaolding courses are designed to giveparticipants the knowledge and skills to saely and eciently perorm moreadvanced scaolding. The course covers regulations, saety requirements,tube and coupler scaolds, cantilevered and spur red scaolds, cantileveredcrane loading bays, barrow ramps, sloping platorms and mast climbers.

Who is the course for? Trainees who hold a Basic Scaffolding certicate of competency andwant to learn the necessary skills to move up to Intermediate and

Advanced Scaffolding.

Course programme Legislation in the workplace Bends and hitches

Plan work

Scaffold components

Modular systems

Tube and coupler

Ground bearing pressure

Minimums and maximums for suspended and hung scaffolds

Estimation of material

Practical training

Dismantle scaffold and stow gear

Training method A combination of theory sessions and practical application.

Duration 5 days each course

Basic Scaolding (Australian Standard)

This Basic Scaolding course is designed to give participants the knowledgeand skills to saely and eciently perorm basic scaolding based on theOccupational Health Services o Australia standards or scaolding. Its mainaim is to provide participants the knowledge and develop the competencyand skills to saely erect scaold structures. The course covers regulation,saety requirements, tube and tting, rames, mobile scaolding, laddersand trestles.

Who is the course for? Any person who has to erect and dismantle modular and pre-fabricated scaffolding, use safety harnesses and erect static lines/

safety nets.

Course programme General safety Types of scaffolds

Working platform

Foundation (calculating

length of soleboards)

Structural stability

Access to scaffolds

Modular scaffolds

Frame scaffolds

Mobile scaffolds

Trestle and bracket scaffolds

Birdcage scaffolds

Ancillary equipment

Bends and hitches

Industrial safety net

Inspect and maintenance of

scaffolding equipment

Dismantle scaffolding equipment

Training method Mixture of theory and practical.

Duration 5 days


5/20


CISRS Basic Scaolding Part 1

The Cape Training and Assessment Centre in the Philippines is the onlycentre outside the UK accredited by the Construction Industry ScaoldersRecord Scheme (CISRS) to oer Basic Scaolding. Capes Basic ScaoldingPart 1 course aims to provide an introduction to scaolding, covering thesae erection and alteration o a range o scaolding structures. We striveto improve saety standards by ensuring that operatives engaged in theerection, alteration and dismantling o scaolds are proper ly trained andgiven sucient experience to carry out such work saely and properly.

Who is the course for? Suitable for all scaffolding operatives who are at anytime required toerect, substantially alter or dismantle scaffolding and have had at least

six months previous on-site experience.

Course programme Health and safety awarenesscourse

Safety guidance note 4 training

and instruction

Familiarisation in approved

prefabrication systems scaffold

Interpretation of simple

drawings

Putlog scaffold

Birdcage scaffold

Independent scaffold

Static tower (in tube and ttings)

Alterations to scaffolds

(dropping lift height on

independent)

Training method A highly participative course with practical sessions to compliment theclassroom theory session.

Duration 10 days

CISRS Basic Scaolding Part 2

The Basic Scaolding Part 2 is a course designed to provide candidatesboth theoretical and practical knowledge in addition to those oered inBasic Scaolding Part 1. Its aim is to train suitable candidates in the saeerection, alteration and dismantling o the ollowing types o scaold: basicindependent tied scaold with preabricated beams, protective ans,pavement gantry, loading bay, roo saddle scaold, splay scaold andtruss out scaold.

Who is the course for? Trainees who have already completed and passed the Part 1 courseand have the recommended amount of further scaffolding experience

(minimum of 6 months) prior to commencing Part 2.

Course programme Review of statutory regulationsand codes of practice

Interpretation of drawings

Erecting and dismantling

complex scaffolds

Independent scaffold with

bridging

Protective fan

Truss out

Cantilever drop

Pavement gantires

Roof saddle/stack

Sheeting of scaffold

Proper use and inspection of

safety harness

Training method A highly participative course with practical sessions to compliment theclassroom theory session.

Duration 10 days


6/20


Scaold Inspection

Scaold Inspection is designed or all Supervisors and Managers required toinspect, record, and approve scaold structures. By attending the course,candidates will gain knowledge o the requirements or inspection o scaoldtubes and ttings on work platorms. This Scaold Inspection training courseis intended or persons responsible or inspecting and checking scaoldsor sae use and in accordance with statutory regulations. The overall aim isto develop in trainees an understanding o scaold components, orms o

construction and inspection procedures o basic access scaolds and tocomply with current legislation and codes o practice.

Who is the course for? Candidates that are responsible for carrying out statutory scaffoldinspections and have basic understanding of construction work at

height prior to attending.

Course programme Statutory requirements andpractice codes

Identifying scaffold materials

and components

Equipment tolerance

Scaffolding foundations and

ties

Access and egress

Background on work platform

Lashing and xing of ladders

Scaffolding types

Inspection and registers

Practical inspection and

detection of built-in faults

Training method Practical scaffolding inspections alongside theory test to assesstrainees comprehension.

Duration 2 days

CISRS Scaolder Skills Test

The CISRS Scaolders Skills Test is designed to assess i the candidates candemonstrate the skills learned during the CISRS Basic Scaolding Part 1and 2 courses: saely erect, alter and dismantle scaolding in line withthe objectives approved by CISRS. By the end o the course successuldelegates will have demonstrated their competency in the sae erection,alteration and dismantling o basic scaold structures covered in the CISRSScaolding Part 1 and 2.

Who is the course for? Scaffolders who have completed the Scaffolding Part 1 and Part 2course and have a minimum of six months site experience (between

Part 2 and this assessment).

Course programme The trainees competence will be assessed in the following areas: Interpreting instructions and information

Producing material lists and method statements

Selecting and checking components

The practical erection and dismantling of a cantilever scaffold

Training method Majority of the assessment is based on practical exercises with asmall proportion of assessing t heory.

Duration 2 days


7/20


Blasting and Painting

Capes Blasting and Painting training presents the core knowledge andskills required in industrial painting and spraying. The course is also designedto support proessional operatives, who are already highly competentwithin the discipline, as a useul reresher course to test their abilities andcompetencies.

Who is the course for? Newcomers to the trade who want to learn the skills required inindustrial painting or experience blasters/painters who want to refresh

their knowledge.

Course programme Level 1 - Basic Blasting and

Painting Training

HSE overview, blasting and

painting safety practices

Surface preparation (grit

blasting)

Basic coating technology

(corrosion/coating technology)

Industrial painting

Coating defects and assessment

Calculations

Level 2 - Advanced Blasting

and Painting Training

Use of blasting and painting

instruments (DFT, WFT, gauge,

holiday)

Testing

Daily painting report preposition

Training method Includes theory and practical application with close supervision. To

ensure candidates achieve the required competency, they are asked

to complete a training portfolio at the end of the course.

Duration 5 days

Insulation

The Insulation training course is designed to assist trainees to gain thenecessary qualications and competencies to service all insulationrequirements. The main aim is or candidates to gain the knowledge andskills to assess appropriate thermal, acoustic, cryogenic, personal protectionand passive reproong insulation needs in dierent locations under possiblyextreme conditions.

Who is the course for? Trainees who are interested in working as an industrial insulator.

Course programme Introduction to insulation Staggered joints

Straight pipe section application

Mylar foil application

Bend application

Tee piece application

Vapour stop

Expansion joints

Contraction joints

Fibaroll

Ultraviolet lights

Working with lights

Tools, equipment and materials

needed for thermal, acoustic,

cryogenic, personal protection

and passive re-proong projects

The installation of non-metallic

cladding to pipe work, anges,

valves, and dome ends including

sealing the joints and using

identication markers

Cladding equipment maintenance

Training method Includes discussion, demonstration and practical application.

Duration 10 days


8/20


Welder Training and Testing

Welder Training and Testing is specically designed to train weldersto approved standards. Capes commitment to saety is our edge intraining and we ensure that all candidates carry out their tasks ollowinginternational standards o healthy and saety. We oer intensive trainingor various welding disciplines such as Shielded Metal Arc Welding (SMAW),Gas Tungsten Arc Welding (GTAW) and Flux Core Arc Welding (FCAW).

Who is the course for? Existing welders who need competency training and qualication.

Course programme Basic welding process

SMAW welding process

GTAW welding process

GMAW welding process

FCAW welding process

Basic joint design

Welding position and techniques

Welding procedure specication

Introduction to basic NDT

Training method Includes theory as well as practical application.

Duration 5 days

Manual Handling

The Manual Handling training course is designed or all personnel inindustries involving lifing, lowering, pushing, pulling and carrying tasks.It provides candidates the proper knowledge and training in manualhandling to ensure saety and prevent injuries when doing their tasks. Itsaim is to ensure that delegates will understand the need or accidentprevention and control, understand basic body mechanics and be ableto demonstrate sae methods o lifing.

Who is the course for? Anyone who needs basic practical experience of manual handlingand lifting techniques.

Course programme Introduction to manual handling Duties and responsibilities of employers and employees

Avoiding manual handling

Risk assessment

Appropriate systems of work

Use of mechanical aids

Guiding principles for safe lifting heights

Good handling technique (for pushing and pulling)

Training method Includes theory as well as practical sessions.

Duration 1 day


9/20


Conned Space Entry Awareness

The Conned Space Entry Awareness course is oered to individuals requiredto enter conned spaces such as manholes, shafs, chambers as well asthose who assist with conned space operations. In this course, candidatesgain an understanding o current legislation regarding conned spaceentry and are taught to implement appropriate accident and emergencyprocedures on-site. Capes Conned Space Entry Awareness course ensuresthat candidates ully understand the dangers and responsibilities inherent

in entering such spaces and how to identiy these to protect everyoneinvolved.

Who is the course for? Anyone who is required to enter a conned space or for personnelwho are responsible for safe working practices and required to

identify possible conned spaces.

Course programme Introduction to connedspaces (denitions)

Conned space hazards and

inherent dangers

Conned space control

measures

Conned space requirements

Duties and responsibilities

Risk assessments

Standy-by men and buddy-

buddy systems

Safe work practices and safety

checks

Equipment including PPE

Training method Classroom and theory exercises.

Duration 1 day

Conned Space Entry Training

Capes Conned Space Entry Training programme provides soundknowledge and understanding o OHS procedures required to participate,enter and work in a conned space. The aim o this course is to ensurethat trainees will attain a variety o levels o knowledge and skills to saelymonitor and manage entry into conned or restricted spaces. CapesConned Space Entry Training is delivered in accordance with AS/NZS 2865(2001).

Who is the course for? Anyone who is required to enter a conned space or who have aresponsibility for directing personnel to do so.

Course programme OHS, statutory compliance and CSE denitions Personnel protective equipment (PPE)

Hazard identication and evaluation

Risk assessment and control measures

Entry permits, tagging and lockout

Stand-by person, observer, spotter duties

Emergency response and rescue plans

Atmosphere monitoring and respiratory air

Training method Written and practical assessment.

Duration 1 day


10/20


IRATA Rope Access Level 1

Cape conducts Rope Access training under the Industrial Rope AccessTrade Association (IRATA), which is the only internationally recognisedcertication scheme or industrial rope access. The aim o this Level 1 courseis to introduce candidates to the basics o the rope access industry to allowthem to work under close supervision o a Level 3 supervisor.

Who is the course for? Recommended for those with no previous experience in industrialrope access.

Course programme Personal equipment Sets of equipment

Equipment inspection requirements

Ascending and descending manoeuvres

The main principles of rescue works

Ropes rigging systems and main knots

Training method Includes theoretical knowledge and practical assessment.

Duration 5 days

IRATA Rope Access Level 2 and 3

Cape also provides both Level 2 and Level 3 IRATA Rope Access training. Themain aim o the level 2 course is to ensure candidates are still competentat the achieved rst level. Afer the required amount o work experience,they may undergo advanced level 3 training. This course will build on thecandidates experiences and prepares them to take on the roles o TeamLeaders, Saety Supervisors, Rescue-men and Riggers.

Who is the course for? Candidates who already have IRATA level 1 qualication and requiredwork experience (1000 logbook hours over a minimum of 12 months)

who want to progress to the intermediate and advanced IRATA Rope

Access levels. Level 3 candidates must al so hold a current rst aid

certicate to show they are competent in undertaking emergency rst aid.

Course programme Level 2 Prociency in all Level 1

techniques

Enhanced rigging techniques

Rescue from ascenders

Rescues from manoeuvres aid

climb, deviation, re-belay, rope

transfer

Hauling and lowering casualties

Level 2 theory

Equipment selection, inspection,

care and maintenance

Level 3

Current legislation and regulations

Equipment selection, inspection,

care and maintenance

Operational planning and risk

assessment

Prociency in Level 1 and 2

techniques

Advanced rigging techniques

Advanced rescue techniques

Team management and

responsibilities

Training method Mixture of theoretical and practical applications.

Duration 5 days each course


11/20


Working at Heights Saely

Capes Working at Heights Saely programme provides participants withthe theoretical knowledge required to work at heights in a sae andsecure manner. Unlike any other working at heights training in Australia, thisnationally accredited (NTIS code: 51938) course provides trainees with thepractical skills, knowledge and critical aspects required to enable them towork at heights in a sae and secure manner. In addition to the essentialtheoretical knowledge, participants are taken through a comprehensive

practical session providing them with valuable hands-on experience.

Who is the course for? Ideal for those who have a responsibility for or are involved in workat height.

Course programme Occupational health and safety Fall protection systems

Hazard identication and controls

Prepare and plan to work at height

Use of harnesses and other equipment

Inspection and maintenance of equipment

Suspension trauma

Perform operations at heights

Training method Method of instruction includes theory and practical application.

Duration 1 day

Saety Harness Use and Inspection

The Saety Harness Use and Inspection training course is imperative oevery person working at height. In this course, candidates will be able toselect and use a harness and associated equipment correctly and carryout a pre-use saety check. The course teaches the proper procedurein wearing saety harnesses and how to detect visual damage duringinspection. Working at heights today requires an awareness o theinherent dangers in the job being done and the environment in which

the work is being carried out. Our Saety Harness course trains workersto achieve a higher standard o competence in order to work saely at

height.

Who is the course for? All those who need to be made aware of the correct selection,inspection and use of safety harnesses to prevent falls.

Course programme Webbing D-rings/back pads

Attachment of buckles

Tongue/grommets

Friction and mating buckles

Specication for harnesses

and lanyards

Rules for installation and use

Inspection procedures

Requirements for cleaning and

storage

Issue procedures and records

Training method Method of instruction includes presentations and practicaldemonstration.

Duration 1 day


12/20


Rescue and Retrieval Training

The Rescue and Retrieval training course is specically designed toprovide scaolders and other saety harness users with knowledge andskills in rescuing colleagues suspended at height with a saety harness/lanyard. Specically, it tests the candidates preparedness to respond to anemergency such as when a colleague alls and remains suspended by hisharness. This course is designed to amiliarise personnel with how they caneectively work in a supporting role during a rescue operation.

Who is the course for? Designed for any worker who is regularly working at height andrequires a full understanding of fall-from-height hazards/issues on

the job.

Course programme Safety procedure for rescueand retrieval

Risk assessment

Establishing rescue teams and

emergency procedure

Servicing and inspection of

equipment

Knowledge of rope types and

strengths

Tying basic knots

Knowledge of rope software

and hardware

Knowledge and use of

anchoring points

Constructing mechanical

advantage systems

Basket operations

Training method Includes theoretical presentations, practical demonstrations andexercises.

Duration 1 day

Basic First Aid

Capes Basic First Aid course oers candidates an understanding andtraining in providing immediate relie to casualties during emergencyscenarios. The course covers topics rom assessment o emergency situationto actual application o Cardio Pulmonary Resuscitation (CPR). Capesaim in teaching basic rst aid is to assist in preserving lie, prevent thedeterioration o the patients condition, and to help in recovery.

Who is the course for? Anyone who should be familiar with basic rst aid procedures andbe able to act quickly in the event of any emergency.

Course programme Principles of rst aid Basic life support (rescue breathing/CPR)

Principles of rescue and transfer

First aid for unconscious patients, bleeding/hemorrhage and

shock, burns, fractures, injuries and wounds, poison, bites

and stings, asthma, heart attack and nausea

Other conditions arising from emergency scenarios

Training method Includes presentations, demonstrations and practical applications.

Duration 3 days


13/20


Forklif Truck

The Forklif Truck course oers training according to the Road TransportIndustry Training Board (RTITB) standards. RTITB is recognised by the UnitedKingdom Health and Saety Commission as well as the Philippine Healthand Saety Commission under Health and Saety at Work Act o 1974(Sec. 2 and 16). In this course, trainees will receive in-depth instructionson applicable regulations and sae orklif operations. Each trainees skilllevel is assessed until a level o operational competence is observed.

Who is the course for? Delegates who have experience of operating a forklift but havenever been trained on the correct and safe use of forklift truck

operations to RTITB standards.

Course programme Health and safety guidelines Operator responsibilities

Pre-shift inspection

Identication of all main

components

Correct driving and operation

Controls and instruments

Correct stacking methods

Accident prevention

Truck stability

Vehicle loading/unloading

Final assessment

Training method Includes discussion, demonstration and practical application to

ensure we meet safety and competency standards.

Duration Depending on the courseFive-day basic operator counterbalance (Novice)

Three-day basic operator counterbalance (Existing)

One-day refreshers training

Rigging and Slinging

Capes Rigging and Slinging training course covers the duties andresponsibilities o a rigger based on statutory standards. It emphasisestraining on important areas o pre-use inspection, sae usage and propercleaning and storage o lifing equipment. This course is designed orparticipants to gain the necessary skills to plan, prepare and completebasic rigging work as prescribed by the National Occupational HealthSaety Certication Standard or Uses and Operators o Industrial

Equipment.

Who is the course for? Existing riggers who need competency training and qualication.

Course programme Introduction to rigging Rigging plans and calculating load weight

Finding the C of G and load control

Ropes and knots

Rigging equipment - cable clips

Sling and hitches

Clamps, chains, hoists and blocks

Training method Mixture of theoretical presentations, practical demonstrationsand exercises, combined with the assessment of the delegates

knowledge and skill level during the learning process.

Duration 5 days


14/20


Saety Representative Training

Saety Representative Training is designed to create awareness andunderstanding o the unctions and duties o the health and saetyrepresentative. It is an ideal course or persons nominated by theiremployer to be a health and saety representative. The objective othis course is to promote and maintain saety and health in the contexto the learners workplace and to eectively represent employees onhealth and saety issues. It will teach and enable them to communicate

saety and health inormation to peers and supervisors and to advisemanagement on a range o occupational saety and health issues in the

workplace.

Who is the course for? Anyone nominated to be health and safety representatives in theirworkplace.

Course programme Role of the safetyrepresentative in the workplace

Know the statutory

rights placed on the safety

representative in the workplace

Overview of health and safety

legislation

Structure and function of a

safety statement

Safety inspection

Investigate, report and prevent

workplace accidents

Understand hazardous

identication, risk assessment

and risk control

Training method Theoretical presentations and discussions.

Duration 1 day

Basic Fireghting

The Basic Fireghting training course is oered to all personnel romall types o businesses. Part o health and saety measures at work isthe proper use and selection o re extinguisher or certain types omachines. The course is designed to equip learners with the knowledgeand necessary skills to manage and extinguish a re in the home or oceenvironment, using a variety o skills and various reghting equipmentcovered during the course.

Who is the course for? Anyone who should have increased knowledge on re and resafety.

Course programme Legal re code, policies andregulations

Organising the re brigade

Fire safety

Stages of re

Heat transfer

Factors affecting the degree

of re hazard

Principles of re prevention and

control

Fire extinguishers (types,

inspection and maintenance)

Evacuation

Training method Includes theoretical presentations, practical demonstrations and

exercises.

Duration 1 day


15/20


Elevated Work Platorm

The Elevated Work Platorm (EWP) training provides the participant with thenecessary knowledge and skills to correctly and saely operate elevatedwork platorms specic to clients operations. Upon completion o thecourse, delegates will be able to drive mobile elevated work platorms andmanoeuvre them as required. The candidate will be able to assess his workenvironment so as to extablish any saety hazards in order to prevent oreliminate them.

Who is the course for? Anyone who uses or will be operating a mobile elevated workplatform and those who have a responsibility for directing personnel

to do so.

Course programme Health and safety at work Proper PPE (with harness and lanyard)

Terminologies

Mechanical inspections

Setting up

Stability

Operating guidelines

Traveling

Training method Combination of classroom training and on-the-job.

Duration 1 day

Abrasive Wheels

The Abrasive Wheels training allows candidates to know how to selectand mount saely the correct type o disc or wheel required or their job.Operating abrasive wheels or cutting-o discs involves saety measuresand responsibilities. Delegates will be able to state the hazards that existwhen using abrasive wheels and the precautions to take to overcomethese hazards as well as demonstrate the correct method o mountingan abrasive wheel to a portable machine.

Who is the course for? All those required to operate or change abrasive wheels andcutting-off discs.

Course programme Proper operation of themachine

Produce good quality

outputs for their client

Health and safety at work

regulations including proper

PPE

Safe use of abrasive wheels

Manual handling

Types and functions of

abrasive wheels and cutting

discs

Selecting, testing, mounting

and storage of abrasive wheels

Proper care, maintenance,

handling and transporting of

abrasive wheels and discs

Training method Includes theory and a practical training session.

Duration 1 day


16/20


Health and Saety in the Workplace

The Health and Saety in the Workplace course provides essentialknowledge and understanding o health and saety to reduce risks andprevent accidents and ill health arising rom work activities. It oers ideason how to reduce the impact o risk at work, improve the capacityo business operators and workers to manage work health and saetyeectively and eliminate hazards at the design stage.

Who is the course for? All employees in order to eliminate unt working practices andaccidents.

Course programme Health and safety at work Health and safety law

Accidents and ill health

Introduction to ill health and

occupational health

Prevention of accidents

Risk assessments

First aid at work

Personal protective workplace

design equipment

Noise and welfare

Work equipment

Electricity

Fire prevention

Hazardous substances

Manual handling

Training method AV presentation and theory test.

Duration 1 day

Saety Passport

Capes Saety Passport course is designed to provide candidates with abasic knowledge o health and saety, allowing them to work more saelyand with less risk to themselves and others. The main aim o the course is toraise the health and saety awareness o all concerned and promote a saerworking environment or contractors and employees.

Who is the course for? All personnel who work on industrial and construction sites.

Course programme Health and safety law Safe working practices

Safe access and egress

Working at heights

Site transport

COSHH/PPE and hazardous substances

Manual handling

Cranes, hoists and slings

Noise at work

Fire precautions

Training method AV presentation and tutorials.

Duration 2 days


17/20


Control o Substances Hazardous to Health

The Control o Substances Hazardous to Health (COSHH) course is to providedelegates with the inormation to look careully at their own work activitiesand contrbute to the saer use o hazardous substances in co-operation withtheir work colleagues.

Who is the course for? Anyone who uses substances hazardous to health at work

and introduces delegates to the hazards associated with thosesubstances, the risk and controls available and what to expect from

a COSHH assessment.

Course programme Denition and types of substances hazardous to health in theworkplace

Health effects of hazardous substances and their causes

COSHH assessments and control options

Responsibilities imposed by the Control of Substances

Hazardous to Health Regulations 2002

Training method Presentations and tutorials.

Duration 3 hours

Environmental Awareness

The Environmental Awareness course provides learners with the appropriatelevel o knowledge and understanding o the key concepts involved inenvironmental awareness as well as describe the major environmental issuesacing organisations. It should help the trainees understand how they cancontribute to reducing environmental impacts.

Who is the course for? All delegates who need to understand the principles andimportance of environmental issues.

Course programme Environmental issues Pollution

Business and the environment

Energy and water

Waste management

Transport

Environmental law

Environmental management


Duration 1 day


18/20


Accident/Incident Investigation and Reporting

The Accident/Incident Investigation and Reporting course was designedto provide personnel with the skills and understanding to enable themto investigate accidents/incidents and report these in line with HSErequirements and best practice.

Who is the course for? Managers, Supervisors, health and safety representatives and QA

personnel.

Course programme Maintaining the scene, preventing further harm/preserving life Preserving evidence, responsibilities, HSE involvement,

recording the scene, root cause analysis

Immediate causations, corrective and preventative actions,

interviewing witnesses/victims, getting to the truth

Reporting ndings with accuracy and clarity

Consequences

Training method Classroom lectures, workshops, case studies, role playing andsimulated exercises.

Duration 2 days

Permit to Work

The Permit to Work awareness course is tailored to client-specic industries.Its main aim is to provide candidates with a thorough understanding ohow such systems work, why they are necessary, individual and corporateresponsibilities under such systems and the consequences o getting itwrong.

Who is the course for? All personnel who work under such permits and those with theresponsibility of issuing them.

Course programme How such systems work and the necessity for them Responsible persons and authorised persons and their respective

duties

Key safes and lock out systems, labelling, related paperwork and

duties of care

Pre and post permit issue checks

Consequences

Training method Classroom lectures, with practical examples and actual practiceunder supervision.

Duration Depending on the course

Appreciation course for workers - 1 dayPermit issuers course - 3-5 days (dependent on client requirements)


19/20


IOSH - Managing Saely

This Institution o Occupational Saety and Health (IOSH) in ManagingSaely course oers Managers and Supervisors the knowledge to ulltheir responsibilities in handling resources and risk. It is designed or thoserequired to manage saely and eectively in compliance with both theirorganisations policy and best practice in health and saety.

Who is the course for? Any personnel who have to manage risk and resources.

Course programme Safety management Reactive monitoring

Risk assessment and risk control

Active monitoring

Review and audit

Health and safety legislation

Hazards - general and organisation-specic


Duration 1 day

IOSH - Working Saely

The Institution o Occupational Saety and Health (IOSH) in Working Saelycourse ocuses on why health and saety are important and how individualscan make a dierence in the wellbeing o themselves and others throughchanging their behaviour. Everyone at work should have an understandingo why they must work saely and this course delivers that.

Who is the course for? People at any level and from any sector needing a basic knowledgein the essentials of health and safety.

Course programme Module 1 - Introducing working safely Module 2 - Dening hazard and risk

Module 3 - Identifying common hazards

Module 4 - Improving safety performance

Module 5 - Protecting our environment

Training method Classroom lectures and presentations that allow full involvement ofeach trainee.

Duration 1 day


20/20


Task Analysis - Hazard ID and Risk Assessment

Cape designed this Task Analysis - Hazard ID and Risk Assessment courseto oer candidates the knowledge to allow them to evaluate work andidentiy potential or inherent hazards. It also teaches the trainees how toeliminate and control these hazards to reduce risk to an acceptable levelas well as suggest any improvements that could reduce the risk o illness orinjury.

Who is the course for? Supervisors and Managers.

Course programme Evaluating the task Documenting the ndings

Identifying inherent hazards

Evaluating the risk in these and instigating suitable control

measures to reduce all risks to an acceptable level where

these cannot be eliminated completely

Training method Forum sessions with extensive practical exercises.

Duration 1 day

Contact Capeand discoverhow trained,competent andsae people canimprove yourbusiness

cape training brochure_asia pacific rim offshore

Documents