caps and closures

4-in. diameter cut-off wheels provide superior wheel life and faster cutting times throughout their usage.

Circle 422 on the reader service card

Parts Cleaner Pressure Island Menlo Park, Calif.

A new state-of-the art, closed-loop, precision parts cleaner, which provides an environmentally safe solution t o cleaning and degreasing, is available

f

from Pressure Island. The cleaner is a uniquely operated closed-loop unit that removes oils, grease, and other con- taminants while capturing the waste in oil/water separators. The unit is self contained and portable and cleans with hot water and high pressure up to 1,300 psi.


Cleaning, Rinsing, and Drying System S&K Products International Inc. Chestnut Ridge, N.Y.

The IG-400 Co-Solvent cleaning, rinsing, and drying system is specifically designed for use with nonvolatile cleaning solutions and highly volatile rinsing/drying chemicals. IG-400 is designed to accommodate the latest de- velopments in solvent cleaning by uti- lizing a chemical targeted specifically at the soil and a second chemical that provides rinsing and drying capabili- ties.


Regenerative Thermal Oxidizers Smith Environmental Corp. Ontario, Calif.

Smith Compact Regenerative Ther- mal Oxidizer (RTO) designs are ideal for applications requiring less than 98% destruction/removal efficiency (DRE) of VOC, air toxic, and odor emissions. Typical RTOs are designed to achieve over 98% DRE through its patented purge approach. The compact RTO is skid-mounted, shippable in one piece, easier to install, has a smaller footprint, and is less expensive to build. It is ideal for applications rang- ing from 5,000 to 20,000 scfm.


Caps and Closures stockCap St. Louis

stockCap imprinted closures, round and rectangular caps, and custom dip- molded parts are available in several printing processes and single- or mul- ticolor imprinting. Company name, logo, printed warnings, or instructions can be added. Silk-screened printing

FOR Q U A L I T Y F ILTRATION OF C O R R O S I V E L IQUIDS

COMPACT ~ IN-TANK

FILTER SYSTEMS

; i

. STAINLESS STEEL FILTER SYSTEMS BAG FILTERS

LARGE VOLUME PRECIOUS METAL I

RECOVERY ~ I SYSTEMS ~ ' ~ ]

CALL OR WRITE FOR FREE P U M P A N D FILTER CATALOG.

B Circle 056 on reader information card

METIPRO " " " o, o.,,,o.Sethco D w . s . o n 70 ARKAY DRIVE,

HAU PPAUGE, NEW YORK 11788-3773 TEL: 516-435-0530 • FAX: 516-435-0654

CARBON TREATMENT/FILTRATION SYRTEMR

230 N. CRESCENT WAY, UNIT I, ANAHEIM, CA. 92801

TEL: 714-991-0270 • FAX: 714-991-8107 J

80 METAL FINISHING • MARCH 1997

resists oils, moisture, wear, and sol- vents.

i!! ~&ii ? !;~iiiiiiiii . . . . ¸i~¸¸~i¸ ̧ ~ii:iiiiill !i! ̧̧ ,


Direct-Drive Blowers Tri-Mer Corp. Owosso, Mich.

Tri-Mer's heavy-duty, direct-drive blowers for use with scrubbers and HAC equipment and in environments where air must be efficiently ex- hausted, directed, or circulated are

manufactured from UV-stabilized polypropylene for maximum resistance to corrosive gases and fumes of all types. They have an operating temper- ature range to 180°F and are suitable for installation indoors or out. The

blowers feature variable frequency

drives and a compact, maintenance- friendly design. They are vibration- and pulse-free.


Brush Plating Touch-Up Tool W.R. Associates Inc, Encinitas, Calif.

W.R. Associates introduces its brush plating touch-up tool, known as the Versa-Plater. The flexible platinum- clad niobium anode allows coverage of a wide variety of profiles and narrow areas. Typical applications include PCB repair, cadmium touchup, decora- tive, and virtually all other touchup requirements. The anode won't con- taminate the plated deposit or the solution. Platinum also provides im- proved conductivity over carbon and it is virtually permanent. The Versa- Plater is compatible with most brush plating operations.


f

FOR CHEMICALS AND INDUSTRIAL CORROSIVE LIQUIDS

PUMPING STATIONS

: : ~ ~ 9 i : ~ " :.~

SUMPPUMPS MAGNETIC DRIVE SELF-PRIMING PUMPS

CPVC HORIZONTAL PUMPS

CALL OR WRITE FOR FREE PUMP AND FILTER CATALOG.

70 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788-3773

TEL: 516-435-0530 • FAX: 516-435-0654

I I I Circle O57 On reader information card

METIPRO " " " S e t h c o D w , s , o n 230 N. CRESCENT WAY,

UNIT I, ANAHEIM, CA. 92801 TEL: 714-991-0270 • FAX: 714-991-8107

J

METAL FINISHING • MARCH 1997 81

caps and closures

Documents