capstone project engineering
DESCRIPTION
lego robot project for eng1201 lee collegeTRANSCRIPT
![Page 1: Capstone Project engineering](https://reader036.vdocuments.net/reader036/viewer/2022062811/5695d0d91a28ab9b02942220/html5/thumbnails/1.jpg)
CAPSTONE PROJECTROBOT DESIGNDAVID FLORESGARRETH MARCHUKBEDFORD I. UMEZULIKEJORGE MONTERO VALLEJO
![Page 2: Capstone Project engineering](https://reader036.vdocuments.net/reader036/viewer/2022062811/5695d0d91a28ab9b02942220/html5/thumbnails/2.jpg)
WHEEL/STABILIZERS
We put stabilizers on either side of our robot to keep it from tipping over.
We moved the ball inward to decrease our turn radius so our robot would stay on the board.
![Page 3: Capstone Project engineering](https://reader036.vdocuments.net/reader036/viewer/2022062811/5695d0d91a28ab9b02942220/html5/thumbnails/3.jpg)
BUMPERSAdded bumpers to the front of our robot to keep objects from getting stuck under our wheels.
![Page 4: Capstone Project engineering](https://reader036.vdocuments.net/reader036/viewer/2022062811/5695d0d91a28ab9b02942220/html5/thumbnails/4.jpg)
SENSORS
We moved our sonar sensor from the back of our robot and placed it in the front above the light sensor.
![Page 5: Capstone Project engineering](https://reader036.vdocuments.net/reader036/viewer/2022062811/5695d0d91a28ab9b02942220/html5/thumbnails/5.jpg)
SENSORS CONT.By putting our light sensor at a steeper angle it gave us a more precise reading.
![Page 6: Capstone Project engineering](https://reader036.vdocuments.net/reader036/viewer/2022062811/5695d0d91a28ab9b02942220/html5/thumbnails/6.jpg)
OFFENSIVE MECHANISMWe attached the spinning motor on the side of our robot and used it for our weapon.
Originally we had 4 blades that would spin but our weapon was not giving us enough range to hit the targets.
We decreased our blades down to two and added stabilizers to make our blades stronger.
![Page 7: Capstone Project engineering](https://reader036.vdocuments.net/reader036/viewer/2022062811/5695d0d91a28ab9b02942220/html5/thumbnails/7.jpg)
OFFENSIVE MECHANISM
We added extra beams to our two blades that would increase the blade length giving us a larger range.
We put independently spinning beams on the ends of our blades. + We also added a second supporting branch to attack.
![Page 8: Capstone Project engineering](https://reader036.vdocuments.net/reader036/viewer/2022062811/5695d0d91a28ab9b02942220/html5/thumbnails/8.jpg)
TARGET HOLDEROur first design held the target too tight so we had to add spacers between our original design.
![Page 9: Capstone Project engineering](https://reader036.vdocuments.net/reader036/viewer/2022062811/5695d0d91a28ab9b02942220/html5/thumbnails/9.jpg)
FINAL DESIGN!