captiva wood doors the anatomy of a door€¦ · the inside out. beautiful wood doors that are made...
TRANSCRIPT
CAPTIVA WOOD DOORSAllow yourself to be captivated. Discover doors that are different from the inside out. Beautiful wood doors that are made with only the finest hand-selected materials and are constructed using a balance of old world craftsmanship combined with state-of-the-art technology. Every Captiva door is custom made to exact specifications to be perfect every time, a door that will be cherished and admired for years to come.
TABLE OF CONTENTS
Door Construction ......................................................... 2
Shapes and Sizes .......................................................... 3
Wood Species ............................................................... 4
Panel Options ................................................................ 5
Sticking Options ............................................................ 6
Glass and Muntin Bar Options ....................................... 7
Door Comparison Chart ................................................ 8
Door Warranty, Use and Care ....................................... 9
Architectural Spec ................................................. 10–11
page 1
THE ANATOMY OF A DOOR
TOP RAIL
STILE
LITE
JOINT
STICKING
PANEL
PANEL PROFILE
BOTTOM RAIL
INTERMEDIATE RAIL
STILE
MUNTIN BARS
JOINERY: The method used to join the door stiles to the top, bottom, and lock rails. Examples include mortise & tenon, dowels, beaded mortise & tenon, lag screws or bolts. See page 2 for more information.
LITES: A framed opening in a door containing a pane of glass. See page 7 for glass options.
MUNTIN BARS: The narrow horizontal and/or vertical bars in a door lite that separate the individual panes of glass. See page 7 for muntin bar options.
PANEL PROFILE: The dimensional shape exposed edge of the outside perimeter of the panel. See page 5 for panel profile options.
PANELS: The solid sections for the doors that are framed by the stiles and rails. See page 5 for panel options.
RAILS: The horizontal components located at the top, bottom, and mid-sections of the door that extend between the stiles and frame the panels and lites.
STICKING: The profile that is moulded into the stiles and rails to frame and encase the panels or lites. See page 6 of sticking options.
STILES: The vertical components located at the left and right edges of the door.
page 2
CAPTIVA TRADITIONAL DOORSWith stave core stiles and rails, 1/4" veneers, and Tradi-
tional Mortise and Tenon Joinery, our Traditional Series
doors are made for the purest who appreciates a door
that is made using classic door making methods.
CAPTIVA SELECT DOORSConstructed to the highest specifications, our Select
Series doors use state-of-the-art Beaded Mortise and
Tenon joinery combined with stave core stiles to ensure
that every door is straight and true for years.
We are proud to offer two series of Captiva wood doors. Our Select series offers you all the well-crafted beauty of the finest wood door with a two year warranty. Our Traditional series doors are constructed the way craftsmen have been making doors for centuries, using traditional mortise and tenon joinery. Traditional series doors are backed by a five year warranty.
2 Year Warranty, 5 Year Warranty Optional
See page 9 for warranty details.
Captiva Select doors meet AWI Premium standards and
specifications when book match panels are specified.
5 Year Warranty
See page 9 for warranty details.
Captiva Traditional doors meet AWI Premium standards and
specifications when book match panels are specified.
Stave Core Stiles
with 1/8" Veneers
Solid Rails
Stave Core Stiles
with 1/4" Veneers
Stave Core Rails
with 1/4" Veneers
Beaded Mortise and Tenon
Tight fitting beaded mortise and
tenon joinery is far superior to the
doweled joints that most other
door manufacturers use. By pro-
viding more surface area for glue
adhesion the assembled strength
of the joint is vastly increased.
Traditional Mortise and Tenon
Simple and strong, the mortise
and tenon joint has been used for
millennia by woodworkers around
the world to join two pieces of
wood. We've kept up the tradition
by using this time tested method
of joinery in our traditional series
doors.
STAVE CORE CONSTRUCTIONThis environmentally friendly method of construction uses laminated, stable, wood core sandwiched between
solid veneers and matching edges for a stile or rail that is superior for preventing warping or distortion.
select series stile with ovolo sticking
DOOR SHAPESTaking into consideration the architectural style of your home or the
look that you want to achieve, Captiva Wood Doors are available in
our standard shapes of Square, Arched or Round. We also make
Custom Door top shapes, as shown on the previous page, which
are often used in churches, reproduction projects, commercial ap-
plications or when a home is searching for a truly unique look. Door
shapes can combine old architectural styles with new designs for a
truly unique look.
page 3
SQUARE ARCH ROUND
DOUBLE DOOR ARCHED PAIRSTaking into consideration the architectural style of your home or the
look that you want to achieve, Captiva Wood Doors are available in
our standard shapes of Square, Arched or Round. We also make
Custom Door top shapes, as shown on the previous page, which
are often used in churches, reproduction projects, commercial ap-
plications or when a home is searching for a truly unique look. Door
shapes can combine old architectural styles with new designs for a
truly unique look.
1-3/8"
1-3/4"
2-1/4"
INTERIOR AND EXTERIOR DOORSTo help you coordinate all of the doors in your home, Captiva doors
are made for both interior and exterior use. Builders, architects,
and designers often consider the interior and exterior doors as
two different design elements. Captiva allows both the interior and
exterior doors to be supplied by one manufacturer with matching
details in panels, sticking, and specie. As pictured above, match-
ing the species of wood for all your doors, even if the individual
designs of the door are not the same, will give you a unified look
throughout the home while maintaining visual interest.
DOOR THICKNESSWe offer three standard door thicknesses: 1-3/8", 1-3/4", and
2-1/4". Our 1-3/8" doors are recommended and warranted for
interior use only.
STANDARD STILE AND RAIL DIMENSIONSTo the left please find the standard stile and rail dimensions that we use
when constructing our doors. If your project requires specific dimen-
sions, we will be happy to modify these dimensions for our traditional
series doors. (Note: Dimensions include sticking.)
Top Rail:5" (residential)
7" (commercial)
Lock Rails:8½"
Bottom Rail:9½" (residential)
10" (commercial)
Stiles:5" (residential)
6" (commercial)
page 4WOOD SPECIES
Every Captiva door begins with premium select grade lumber. We meticulously gather wood from around the globe to ensure that every door that we make is of the highest quality. We strive to purchase wood products made from lumber harvested in a sustainable manner. The boards and veneers that go into constructing each door are hand selected so that grain and color are consistent.
POPLARThis hardwood is light in color and may feature dramatic dark color variations. Poplar is mostly painted or used with dark stains. Interior use only.
SPANISh CEDARThis hardwood varies from light to dark reddish brown. The texture is rather fine and uniform to coarse and uneven. Spanish Cedar is considered
naturally decay resistant. Interior and Exterior use.
SAPELE MAhOGANYHarvested in Africa, Sapele is very similar to Hondu-ras Mahogany with a regular striped pattern and a dark red-brown color. This species sands and fin-ishes easily and smoothly. Interior and Exterior use.
RED OAKThe texture of Red Oak features a very strong grain pattern which ranges from fine, straight, and close to spread and pronounced. Red Oak stains well for an excellent finish. Interior use only.
WALNUTWalnut is characterized by its beautiful grain lines running throughout and its dark brown color. Walnut veneers may be laminated for width and contain some sap grain and pin knots. Interior use only.
WhITE OAKWhite Oak is primarily warm in color with a hint of ash. It's grain pattern varies from straight and tight to arched and dramatic. White Oak stains well for an excellent finish. Interior and Exterior use.
EASTERN WhITE PINEThis softwood is light brown in color, often witha reddish tinge and turns darker on exposure to air. Eastern White Pine features a comparatively uniform texture and is straight grained. Interior and Exterior use.
ChERRYCherry is characterized by its warm color, smooth texture and straight, fine, and tight grain. Cherry may contain some sapwood and/or pin knots and will darken over time. Interior use only.
FIRThis is a dimensionally stable wood with a straight grain, uniform in color, pattern and texture. Its light warm hue will become more red with age. Fir stains easily and smoothly. Interior and Exterior use.
MAhOGANY (hONDURAS)Mahogany is a dimensionally stable wood spe-cies with a straight or sometimes interlocked grain pattern. Mahogany offers excellent stain and finish consistency. Interior and Exterior use.
MAPLEMaple is strong and hard with a uniform color, texture, and grain. It sometimes features areas with dark streaks and birds-eye or worm track patterns. If left clear, maple may yellow with age. Interior use only.
AShAsh ranges in color from brown to nearly white and may display a dramatic grain pattern. It is popular in woodworking because it is heavy, strong, hard, and stiff. Interior use only.
SPECIAL SPECIE REqUESTSWhen your project requires a specific specie not listed above, let us call on our lumber suppliers from all over the globe to find it.
PREFINISHINGSave time and job site labor costs by having us prefinish your Captiva Doors. Our state-of-the-art pre-finishing line allows us to offer a superior primed or clear coat finish on all our doors.
2 MIL SINGLE PRIME4 MIL DOUBLE PRIMELet us save you a step. For doors that are intended to be painted, we offer two primer thickness options.
4 MIL CLEAR COATOur durable 4 mil clear coat offers UV protec-tion and saves time on the job site. (Depending on the application, ex-posure and overhang, additional coats of finish will be required).
page 5 PANEL OPTIONS
Captiva offers a large selection of panel profile options for all of our wood doors. Each door style is available in the panel options shown.
FLAT PANEL
FLAT PANEL WITh V-GROOVE(for exterior use the v-groove will stop short of the rails)
FLAT PANEL WITh BEAD(interior use only)
BEVEL PANEL
OGEE PANEL
BEVEL PANELWITh BEAD
SCOOP PANEL
BEVEL PANELWITh V-GROOVE
DOUBLE PANEL DESIGNOur double panel technology virtually eliminates cracking panels by allowing independent movement of wood sur-faces exposed to different humidity and temperature conditions on each side of the door. The implementation of our double panel design on all our raised panel doors has enhanced their ap-pearance and performance, especially doors used in exterior applications. We are able to offer many doors with differ-ent species on each door face.
page 6STICKING OPTIONS
Captiva offers a wide array of sticking profile options for all of our wood doors. Each door style is available in the sticking options shown.
OVOLO STICKING SqUARE STICKING BEVEL STICKING
APPLIED MOULDING BOLECTION MOULDING
COMMON PANEL & STICKING COMBINATIONS:
OVOLO STICKING WITh BEVEL PANEL
OVOLO STICKING WITh V-GROOVE BEVEL PANEL BOLECTION MOULDING STICKING WITh BEVEL PANEL
SqUARE STICKING WITh FLAT PANEL
page 7 GLASS AND MUNTIN BAR OPTIONS
INSULATED GLASS
AUTHENTIC DIVIDED LITE
INSULATED GLASS
SIMULATED DIVIDED LITE
Select Series Doors only
SINGLE PANE GLASS
AUTHENTIC DIVIDED LITE
MUNTIN BAR AVAILABILITY: Door Thickness 1-3/4" Doors 2-1/4" Doors 1-3/8" Doors
Muntin Bar Width 1-3/8" 1-1/8" 1" 7/8" 1-3/8" 1-1/8" 1" 7/8" 1-3/8" 1-1/8" 1" 7/8"
SELECT DOOR SERIES
Authentic Divided Lite with Insulated Glass O S O S O S O S S S O O
Simulated Divided Lite with Insulated Glass O B S
Authentic Divided Lite with Single Pane Glass O S O S O S O S S S O O
TRADITIONAL DOOR SERIES
Authentic Divided Lite with Insulated Glass O B S O B S O B S O B S O B S O B S O O
Authentic Divided Lite with Single Pane Glass O B S O B S O B S O S O B S O B S O B S S O S O S O S
O = Ovolo Sticking, B = Bevel Sticking, S = Square Sticking
1-3/8"
Above shown withInsulated Glassand AuthenticDivided Lite
1-1/8"
Above shown withInsulated Glassand AuthenticDivided Lite
1"
Above shown withInsulated Glassand AuthenticDivided Lite
7/8"
Above shown withSingle Pane Glass
and AuthenticDivided Lite
7/8"
Above shown withInsulated Glassand Simulated
Divided Lite
Ovo
lo
Stickin
g
Sq
uare
Stickin
g
Beve
l
Stickin
g
page 8 DOOR COMPARISON CHART
Captiva Select Doors
CaptivaTraditional Doors
STILES
Construction
Stave core with 1/8" veneer
Stave core with 1/4" veneer
Solid Laminated
Size
Special Widths Available
RAILS
ConstructionStave core with 1/8" veneer
Stave core with 1/4" veneer
Solid
SizeSpecial Widths Available
PANELS
Raised PanelsOne Solid Panel
Two Floating Panels
Flat PanelsOne Solid Panel
Book Match Panels (required to meet AWI premium grade with transparent finishes)
DOOR SIZES
Maximum Width3'6"
Unlimited
Maximum height8'0"
Unlimited
SANDING
Assembled door is sanded with a patented CPSII segmented pad system wide belt sander. Customer required to remove cross grain.
Assembled door is sanded with a patented CPSII segmented pad system wide belt sander. Hand sanding provided after door assembly to remove cross grain.
JOINERYBeaded Mortise & Tenon Joints
Traditional Mortise & Tenon Joints
DOOR DESIGNSSpecified Door Designs
Unlimited Door Designs
DOOR ShAPESSpecified Door Shapes
Unlimited Door Shapes
PREFINIShING2 mil Single Prime
4 mil Double Prime
4 mil Clear Coat
WARRANTY2 Year Warranty
5 Year Warranty
Standard
Optional (may void warranty in certain sizes or construction types)
Above chart does not apply to screen, storm, and combination doors.
page 9
CAPTIVA DOOR WARRANTY
2 YEAR WARRANTY - SELECT SERIES DOORS5 YEAR WARRANTY - TRADITIONAL SERIES DOORS
We are proud to warranty all of our custom manufactured interior and exterior stile and rail doors against defects in material and workmanship. Our commitment to producing quality products allows us to offer a two year (Select Door Series) or five year (Traditional Door Se-ries) warranty limited to the original contractor / consumer purchaser covering only defects in material or workmanship provided all recommendations are followed as noted in the Door Use & Care Guide (see below). The warranty period shall commence from the date of delivery.
The following items or conditions shall not be considered a defect in material or workmanship and are not covered by this limited warranty.1. Natural variations in the color, texture, character or grain of the wood.2. Doors altered in the field by more than 1" at bottom, 3/4" at top or 1/4" at sides.3. Doors manufactured over 3'6 wide or 8' high are not warranted against warp. Smaller doors that warp less than 1/4" in the plane of the door itself. Doors which are improperly installed or doors which do not swing freely.4. Variations or unsatisfactory results in gloss level, texture or appearance resulting from field finishing.5. Damage caused by failure to follow Door Use & Care Guide or failure to perform normal maintenance.
Should a Captiva Wood Door fail to conform to this warranty after written notice, within 60 days we will, at our option, either repair the door, provide a replacement door in the same condition as originally delivered by us or refund the original purchase price. In no event shall we be responsible for paying for or performing the work to install or finish a replacement door, all of which shall be the sole responsibility of the per-son making the warranty claim
DOOR USE AND CARE GUIDEA. DOOR CARE
Upon receipt of shipment of doors inspect each door for any visible defects.1. Do not drag across one another or across other surfaces. Store doors flat on a level surface in a dry, well ventilated building. Cover doors 2. to keep clean but allow air circulation. Do not store in direct sunlight.Doors should not be exposed to excessive heat, excessive dryness, humid conditions or sudden changes therein. They should be condi-3. tioned to average prevailing relative humidity of the locality before installation.
B. PREPARATION FOR FINIShINGDoors must be sealed no more than 24 hours after installation.1. Before finishing, sand all surfaces using 180 grit sandpaper. Always sand in the direction of the 2. grain. Remove all scuffs, handling marks, scratches, raised grain, burnishes and effects of expo-sure to moisture that may have occurred.Before finishing, hang the door, then remove to finish properly.3. When finishing glazed doors, apply top coat generously to bridge between wood and glass. Lap 4. paint 1/16" to protect against moisture penetration.
C. FINIShINGChoose only high quality finishes for these doors and carefully follow manufacturer’s instructions.1. In areas exposed to direct sunlight avoid use of dark stains or dark paint. Heat build up will drive 2. out moisture and cause shrinkage and checking. Most doors will accept stain more uniformly if a sanding sealer or conditioner is used prior to sanding.Carefully seal all edges including the top and bottom of the door and areas routed for hardware 3. with a minimum of three (3) finish coats of a good quality paint or varnish. Avoid lacquer or poly-urethane based sealers without U.V. inhibitors for exterior use.Top of all outswing doors must be flashed for weather.4.
D. MAINTENANCEStains and clear finishes last longer if protected from sunlight and weathering.1. Inspect finish at least once per year. A complete and continuous finish must be maintained on all 2. surfaces of the door. Moisture protection at the top and bottom of exterior doors and around cut-outs must be maintained. Moisture may seep into the bottom of exterior doors unless periodically resealed.Warranty: Failure to comply with these guidelines for handling, installation and finishing will negate 3. any warranty claims for product performance by the manufacturer. When doors are replaced un-der warranty we are responsible to replace doors only in the condition originally delivered and are not responsible for refinishing.
REQUIRED OVERHANGDimension A (length of overhang) must be equal to or greater than ½ of dimension B (distance from bottom of door to the base of the overhang). Warranty is void without proper overhang.
A
B
WARRANTY SIZE LIMITATIONS:
Thickness Max Width Max Height
1-3/8 3/0 7/01-3/4 3/6 8/02-1/4 4/0 9/0
page 10
SECTION 08210 (New 2004 Masterformat number will be 081433)
STILE AND RAIL WOOD DOORS
ARCHITECTURAL SPEC
PART 1 GENERAL 1.01 WORK INCLUDED
Furnish stile and rail wood doors as described in door A. schedule and shown on drawings. General and Supple-mentary Conditions as described in Division 1 apply to this Section.
1.02 RELATED SECTIONS
Flush Wood Doors, Section 08210 A. Metal Doors and Frames, Section 08110 B. Millwork and Trim, Section 06200 C. Finish Hardware, Section 08710 D. Glazing, Section 08800 E. Painting, Section 09900 F.
1.03 REFERENCES
AWI/AWMAC Quality Standards Illustrated (QSI), 7th Edition A. ANSI/W.D.M.A Quality Standards I.S. 1A-04 B.
1.04 SUBMITTALS
Comply with Division 1 - Section 01300 submit 6 complete A. schedules including shop drawings for approval.Indicate plans and elevations, materials, surface grain B. directions, profiles, assembly methods, joint details, fasten-ing methods, accessories, preservative treatments, and schedule of finishes. Submit 3 samples of veneer, minimum of 6" x 6" illustrat-C. ing expected range of component finish color and/or grain. The sample shall bear identification of the project, architect or designer, general contractor, woodwork manufacturer, items to which the finish applies and the system utilized to attain the finish.
1.05 QUALITY ASSURANCE
Perform work in accordance with AWI Section 1400 [Pre-A. mium] [Custom] [Economy] Grade quality. (choose one) Work in this section shall comply with the specified B. Grade(s) of Work and Section (s) of the current edition of the AWI/AWMAC Quality Standards Illustrated or the cur-rent edition of W.D.M.A. Quality Standards
1.06 QUALIFICATIONS
Manufacturers who adhere to the standards of the Archi-A. tectural Woodwork Institute (AWI), Architectural Woodwork Manufacturers Association of Canada (AWMAC) and the Window and Door Manufacturers Association (WDMA) and are familiar with these standards.
1.07 DELIVERY, STORAGE AND HANDLING
Comply with Division 1- Section 01600. A. Store doors on a flat level surface, in a clean, dry, well ven-B. tilated area. Keep doors a minimum of 3½" off floor. Doors shall not be exposed to excessive heat, moisture, C. dryness or direct sunlight. Break any protective plastic packaging on site to permit D. ventilation. Ensure that the top, bottom and any cut-outs on doors are E. sealed immediately after removal of protective packaging. Handle doors with clean, dry hands and/or gloves. F. Do not drag doors across one another. G.
1.08 WARRANTY
Comply with Division 1 – Section 01780 A. Provide [two] [five] year warranty for all doors. B. Include coverage for defective materials, including toler-C. ances for warp and delamination of materials. Include removal and re-hanging of doors found to be D. defective
PART 2 PRODUCTS 2.01 MANUFACTURERS
CAPTIVA as Manufactured by North Atlantic Corp. Somer-A. set MA, (508) 235-4397The Maiman Company B. Eggers Industries C. Approved equal (Approved 6 days prior to bid)D.
Door construction, unless specified differently shall include a stave core method that uses a laminated stable wood core sandwiched between veneers. Captiva Traditional Doors use 1/4" solid veneers on all stiles and rails with matching edges to help prevent warp or distortion. Captiva Select Doors use laminated stable wood cores sandwiched between 1/8" veneers for stiles only. Rails will be solid. A unique “beaded tenon” inserted by hand is used instead of dowels creating a similar mortise and tenon connection on all stiles and rails. All raised panels used in both methods shall be manufactured using double panel technology, which virtually eliminates cracking panels by allowing independent movement. Both types of construction are time tested methods and backed by our full warranties.
Multi-lite doors, as true divided lite (TDL), available in Captiva Traditional or Select, with 1/8" single pane or 5/8" IG glass, and wood stops ap-plied to the exterior. Muntin bar widths are 1", 1-1/8", and 1-3/8". Simulated divided light (SDL) with 7/8" SDL bar, and 11/16" duplex muntins. Wood bars applied to both faces of door with the loose stop toward the exterior. SDL is available in Captiva Select doors only.
CONTINUED ON NEXT PAGE >
page 11 ARCHITECTURAL SPEC (CONT.)
2.02 DOOR CONSTRUCTION
Interior non-rated Doors A.
Stiles and rails shall be constructed of Stave Lumber 1. Core material laminated with a minimum ¾" solid hardwood edge and a minimum [1/8"] [1/4"] “A” grade veneer. Cope and stick joinery of stiles and rails using ½" x 2. 4" dowels. Joints to have a minimum of 1 dowel. Muntin bars shall have ¼" x 2½" dowels at every 3. joint. Pressure fit joints using type 2 water resistant glue. 4. Panels shall be manufactured using a double panel 5. construction of solid wood. Flat panels shall have a minimum thickness of 5/8" 6. Raised panels shall have a minimum thickness of 1 7. 1/2". Panel raise shall be constructed of solid lumber 8. (matching face veneer) and rim banded with mitered corners Louvers shall be 3/8" x 2¼" solid lumber or solid 9. MDF for paint grade. Louver slats shall be mortised into stiles and assembled individually.
Exterior Doors B.
Stiles shall be constructed of Stave Lumber Core 3. material laminated with a minimum [1/8”] [1/4”] “A” grade veneer Rails shall be solid lumber construction 4. Cope and stick joinery of stiles and rails using ½” x 5. 4” dowels. Joints to have a minimum of 1 dowel Muntin bars shall have ¼" x 2½" dowels at every 6. joint. Pressure fit joints using type 1 waterproof glue and 7. silicone caulk to prevent moisture penetration. Flat Panels shall be constructed of an exterior grade 8. core with a minimum overall thickness of 5/8". Raised panels shall be constructed of an exterior 9. grade core with a minimum overall thickness of 1 5/8". Panel raise shall be constructed of solid lumber 10. (matching face veneer) and rim banded with mitered corners.
2.03 FABRICATION
Fabricate to AWI Section 1400 [Premium] [Custom] [Econ-A. omy] Quality Standards. (choose one) Hardware cutouts are to be pre-machined by the manu-B. facturer. Hinge screw pilot holes shall be prepped by door manufacturer at factory.When necessary to cut and fit on site, provide materials C. with ample allowance for cutting. Reseal or refinish any machining alterations required at jobsite prior to installation
2.04 FINISHING MATERIALS AND APPEARANCE
Doors for field finishing. A. Raised panel tongues are to be primed prior to assembly B. when doors are to be painted on-site.
PART 3 EXECUTION 3.01 INSTALLATION
Install work in accordance with AWI Quality Standards Sec-A. tion 1700 and NFPA 80 Fire Doors and Windows. Doors and frames must be installed plumb, square and B. level. Clearance between door edges and door frame shall be a C. minimum of 1/16" on hinge edge and 1/8" on the latch edge and top rail. Contractors and their personnel engaged in the work shall D. be able to demonstrate successful experience with work of comparable extent, complexity and quality to that shown and specified.
3.02 ADJUSTING
Adjust work under provisions of AWI Quality Standards A. Section 1700. Ensure that doors swing freely and do not bind in their B. frame. Adjust the finish hardware for proper alignment, smooth operation and proper latching without necessary force or excessive clearance.
END OF SECTION
CAPTIVA WOOD DOORSAllow yourself to be captivated. Discover doors that are different from the inside out. Beautiful wood doors that are made with only the finest hand-selected materials and are constructed using a balance of old world craftsmanship combined with state-of-the-art technology. Every Captiva door is custom made to exact specifications to be perfect every time, a door that will be cherished and admired for years to come.
TABLE OF CONTENTS
Door Construction ......................................................... 2
Shapes and Sizes .......................................................... 3
Wood Species ............................................................... 4
Panel Options ................................................................ 5
Sticking Options ............................................................ 6
Glass and Muntin Bar Options ....................................... 7
Door Comparison Chart ................................................ 8
Door Warranty, Use and Care ....................................... 9
Architectural Spec ................................................. 10–11
page 1
THE ANATOMY OF A DOOR
TOP RAIL
STILE
LITE
JOINT
STICKING
PANEL
PANEL PROFILE
BOTTOM RAIL
INTERMEDIATE RAIL
STILE
MUNTIN BARS
JOINERY: The method used to join the door stiles to the top, bottom, and lock rails. Examples include mortise & tenon, dowels, beaded mortise & tenon, lag screws or bolts. See page 2 for more information.
LITES: A framed opening in a door containing a pane of glass. See page 7 for glass options.
MUNTIN BARS: The narrow horizontal and/or vertical bars in a door lite that separate the individual panes of glass. See page 7 for muntin bar options.
PANEL PROFILE: The dimensional shape exposed edge of the outside perimeter of the panel. See page 5 for panel profile options.
PANELS: The solid sections for the doors that are framed by the stiles and rails. See page 5 for panel options.
RAILS: The horizontal components located at the top, bottom, and mid-sections of the door that extend between the stiles and frame the panels and lites.
STICKING: The profile that is moulded into the stiles and rails to frame and encase the panels or lites. See page 6 of sticking options.
STILES: The vertical components located at the left and right edges of the door.
page 2
CAPTIVA TRADITIONAL DOORSWith stave core stiles and rails, 1/4" veneers, and Tradi-
tional Mortise and Tenon Joinery, our Traditional Series
doors are made for the purest who appreciates a door
that is made using classic door making methods.
CAPTIVA SELECT DOORSConstructed to the highest specifications, our Select
Series doors use state-of-the-art Beaded Mortise and
Tenon joinery combined with stave core stiles to ensure
that every door is straight and true for years.
We are proud to offer two series of Captiva wood doors. Our Select series offers you all the well-crafted beauty of the finest wood door with a two year warranty. Our Traditional series doors are constructed the way craftsmen have been making doors for centuries, using traditional mortise and tenon joinery. Traditional series doors are backed by a five year warranty.
2 Year Warranty, 5 Year Warranty Optional
See page 9 for warranty details.
Captiva Select doors meet AWI Premium standards and
specifications when book match panels are specified.
5 Year Warranty
See page 9 for warranty details.
Captiva Traditional doors meet AWI Premium standards and
specifications when book match panels are specified.
Stave Core Stiles
with 1/8" Veneers
Solid Rails
Stave Core Stiles
with 1/4" Veneers
Stave Core Rails
with 1/4" Veneers
Beaded Mortise and Tenon
Tight fitting beaded mortise and
tenon joinery is far superior to the
doweled joints that most other
door manufacturers use. By pro-
viding more surface area for glue
adhesion the assembled strength
of the joint is vastly increased.
Traditional Mortise and Tenon
Simple and strong, the mortise
and tenon joint has been used for
millennia by woodworkers around
the world to join two pieces of
wood. We've kept up the tradition
by using this time tested method
of joinery in our traditional series
doors.
STAVE CORE CONSTRUCTIONThis environmentally friendly method of construction uses laminated, stable, wood core sandwiched between
solid veneers and matching edges for a stile or rail that is superior for preventing warping or distortion.
select series stile with ovolo sticking
DOOR SHAPESTaking into consideration the architectural style of your home or the
look that you want to achieve, Captiva Wood Doors are available in
our standard shapes of Square, Arched or Round. We also make
Custom Door top shapes, as shown on the previous page, which
are often used in churches, reproduction projects, commercial ap-
plications or when a home is searching for a truly unique look. Door
shapes can combine old architectural styles with new designs for a
truly unique look.
page 3
SQUARE ARCH ROUND
DOUBLE DOOR ARCHED PAIRSTaking into consideration the architectural style of your home or the
look that you want to achieve, Captiva Wood Doors are available in
our standard shapes of Square, Arched or Round. We also make
Custom Door top shapes, as shown on the previous page, which
are often used in churches, reproduction projects, commercial ap-
plications or when a home is searching for a truly unique look. Door
shapes can combine old architectural styles with new designs for a
truly unique look.
1-3/8"
1-3/4"
2-1/4"
INTERIOR AND EXTERIOR DOORSTo help you coordinate all of the doors in your home, Captiva doors
are made for both interior and exterior use. Builders, architects,
and designers often consider the interior and exterior doors as
two different design elements. Captiva allows both the interior and
exterior doors to be supplied by one manufacturer with matching
details in panels, sticking, and specie. As pictured above, match-
ing the species of wood for all your doors, even if the individual
designs of the door are not the same, will give you a unified look
throughout the home while maintaining visual interest.
DOOR THICKNESSWe offer three standard door thicknesses: 1-3/8", 1-3/4", and
2-1/4". Our 1-3/8" doors are recommended and warranted for
interior use only.
STANDARD STILE AND RAIL DIMENSIONSTo the left please find the standard stile and rail dimensions that we use
when constructing our doors. If your project requires specific dimen-
sions, we will be happy to modify these dimensions for our traditional
series doors. (Note: Dimensions include sticking.)
Top Rail:5" (residential)
7" (commercial)
Lock Rails:8½"
Bottom Rail:9½" (residential)
10" (commercial)
Stiles:5" (residential)
6" (commercial)
page 4WOOD SPECIES
Every Captiva door begins with premium select grade lumber. We meticulously gather wood from around the globe to ensure that every door that we make is of the highest quality. We strive to purchase wood products made from lumber harvested in a sustainable manner. The boards and veneers that go into constructing each door are hand selected so that grain and color are consistent.
POPLARThis hardwood is light in color and may feature dramatic dark color variations. Poplar is mostly painted or used with dark stains. Interior use only.
SPANISh CEDARThis hardwood varies from light to dark reddish brown. The texture is rather fine and uniform to coarse and uneven. Spanish Cedar is considered
naturally decay resistant. Interior and Exterior use.
SAPELE MAhOGANYHarvested in Africa, Sapele is very similar to Hondu-ras Mahogany with a regular striped pattern and a dark red-brown color. This species sands and fin-ishes easily and smoothly. Interior and Exterior use.
RED OAKThe texture of Red Oak features a very strong grain pattern which ranges from fine, straight, and close to spread and pronounced. Red Oak stains well for an excellent finish. Interior use only.
WALNUTWalnut is characterized by its beautiful grain lines running throughout and its dark brown color. Walnut veneers may be laminated for width and contain some sap grain and pin knots. Interior use only.
WhITE OAKWhite Oak is primarily warm in color with a hint of ash. It's grain pattern varies from straight and tight to arched and dramatic. White Oak stains well for an excellent finish. Interior and Exterior use.
EASTERN WhITE PINEThis softwood is light brown in color, often witha reddish tinge and turns darker on exposure to air. Eastern White Pine features a comparatively uniform texture and is straight grained. Interior and Exterior use.
ChERRYCherry is characterized by its warm color, smooth texture and straight, fine, and tight grain. Cherry may contain some sapwood and/or pin knots and will darken over time. Interior use only.
FIRThis is a dimensionally stable wood with a straight grain, uniform in color, pattern and texture. Its light warm hue will become more red with age. Fir stains easily and smoothly. Interior and Exterior use.
MAhOGANY (hONDURAS)Mahogany is a dimensionally stable wood spe-cies with a straight or sometimes interlocked grain pattern. Mahogany offers excellent stain and finish consistency. Interior and Exterior use.
MAPLEMaple is strong and hard with a uniform color, texture, and grain. It sometimes features areas with dark streaks and birds-eye or worm track patterns. If left clear, maple may yellow with age. Interior use only.
AShAsh ranges in color from brown to nearly white and may display a dramatic grain pattern. It is popular in woodworking because it is heavy, strong, hard, and stiff. Interior use only.
SPECIAL SPECIE REqUESTSWhen your project requires a specific specie not listed above, let us call on our lumber suppliers from all over the globe to find it.
PREFINISHINGSave time and job site labor costs by having us prefinish your Captiva Doors. Our state-of-the-art pre-finishing line allows us to offer a superior primed or clear coat finish on all our doors.
2 MIL SINGLE PRIME4 MIL DOUBLE PRIMELet us save you a step. For doors that are intended to be painted, we offer two primer thickness options.
4 MIL CLEAR COATOur durable 4 mil clear coat offers UV protec-tion and saves time on the job site. (Depending on the application, ex-posure and overhang, additional coats of finish will be required).
page 5 PANEL OPTIONS
Captiva offers a large selection of panel profile options for all of our wood doors. Each door style is available in the panel options shown.
FLAT PANEL
FLAT PANEL WITh V-GROOVE(for exterior use the v-groove will stop short of the rails)
FLAT PANEL WITh BEAD(interior use only)
BEVEL PANEL
OGEE PANEL
BEVEL PANELWITh BEAD
SCOOP PANEL
BEVEL PANELWITh V-GROOVE
DOUBLE PANEL DESIGNOur double panel technology virtually eliminates cracking panels by allowing independent movement of wood sur-faces exposed to different humidity and temperature conditions on each side of the door. The implementation of our double panel design on all our raised panel doors has enhanced their ap-pearance and performance, especially doors used in exterior applications. We are able to offer many doors with differ-ent species on each door face.
page 6STICKING OPTIONS
Captiva offers a wide array of sticking profile options for all of our wood doors. Each door style is available in the sticking options shown.
OVOLO STICKING SqUARE STICKING BEVEL STICKING
APPLIED MOULDING BOLECTION MOULDING
COMMON PANEL & STICKING COMBINATIONS:
OVOLO STICKING WITh BEVEL PANEL
OVOLO STICKING WITh V-GROOVE BEVEL PANEL BOLECTION MOULDING STICKING WITh BEVEL PANEL
SqUARE STICKING WITh FLAT PANEL
page 7 GLASS AND MUNTIN BAR OPTIONS
INSULATED GLASS
AUTHENTIC DIVIDED LITE
INSULATED GLASS
SIMULATED DIVIDED LITE
Select Series Doors only
SINGLE PANE GLASS
AUTHENTIC DIVIDED LITE
MUNTIN BAR AVAILABILITY: Door Thickness 1-3/4" Doors 2-1/4" Doors 1-3/8" Doors
Muntin Bar Width 1-3/8" 1-1/8" 1" 7/8" 1-3/8" 1-1/8" 1" 7/8" 1-3/8" 1-1/8" 1" 7/8"
SELECT DOOR SERIES
Authentic Divided Lite with Insulated Glass O S O S O S O S S S O O
Simulated Divided Lite with Insulated Glass O B S
Authentic Divided Lite with Single Pane Glass O S O S O S O S S S O O
TRADITIONAL DOOR SERIES
Authentic Divided Lite with Insulated Glass O B S O B S O B S O B S O B S O B S O O
Authentic Divided Lite with Single Pane Glass O B S O B S O B S O S O B S O B S O B S S O S O S O S
O = Ovolo Sticking, B = Bevel Sticking, S = Square Sticking
1-3/8"
Above shown withInsulated Glassand AuthenticDivided Lite
1-1/8"
Above shown withInsulated Glassand AuthenticDivided Lite
1"
Above shown withInsulated Glassand AuthenticDivided Lite
7/8"
Above shown withSingle Pane Glass
and AuthenticDivided Lite
7/8"
Above shown withInsulated Glassand Simulated
Divided Lite
Ovo
lo
Stickin
g
Sq
uare
Stickin
g
Beve
l
Stickin
g
page 8 DOOR COMPARISON CHART
Captiva Select Doors
CaptivaTraditional Doors
STILES
Construction
Stave core with 1/8" veneer
Stave core with 1/4" veneer
Solid Laminated
Size
Special Widths Available
RAILS
ConstructionStave core with 1/8" veneer
Stave core with 1/4" veneer
Solid
SizeSpecial Widths Available
PANELS
Raised PanelsOne Solid Panel
Two Floating Panels
Flat PanelsOne Solid Panel
Book Match Panels (required to meet AWI premium grade with transparent finishes)
DOOR SIZES
Maximum Width3'6"
Unlimited
Maximum height8'0"
Unlimited
SANDING
Assembled door is sanded with a patented CPSII segmented pad system wide belt sander. Customer required to remove cross grain.
Assembled door is sanded with a patented CPSII segmented pad system wide belt sander. Hand sanding provided after door assembly to remove cross grain.
JOINERYBeaded Mortise & Tenon Joints
Traditional Mortise & Tenon Joints
DOOR DESIGNSSpecified Door Designs
Unlimited Door Designs
DOOR ShAPESSpecified Door Shapes
Unlimited Door Shapes
PREFINIShING2 mil Single Prime
4 mil Double Prime
4 mil Clear Coat
WARRANTY2 Year Warranty
5 Year Warranty
Standard
Optional (may void warranty in certain sizes or construction types)
Above chart does not apply to screen, storm, and combination doors.
page 9
CAPTIVA DOOR WARRANTY
2 YEAR WARRANTY - SELECT SERIES DOORS5 YEAR WARRANTY - TRADITIONAL SERIES DOORS
We are proud to warranty all of our custom manufactured interior and exterior stile and rail doors against defects in material and workmanship. Our commitment to producing quality products allows us to offer a two year (Select Door Series) or five year (Traditional Door Se-ries) warranty limited to the original contractor / consumer purchaser covering only defects in material or workmanship provided all recommendations are followed as noted in the Door Use & Care Guide (see below). The warranty period shall commence from the date of delivery.
The following items or conditions shall not be considered a defect in material or workmanship and are not covered by this limited warranty.1. Natural variations in the color, texture, character or grain of the wood.2. Doors altered in the field by more than 1" at bottom, 3/4" at top or 1/4" at sides.3. Doors manufactured over 3'6 wide or 8' high are not warranted against warp. Smaller doors that warp less than 1/4" in the plane of the door itself. Doors which are improperly installed or doors which do not swing freely.4. Variations or unsatisfactory results in gloss level, texture or appearance resulting from field finishing.5. Damage caused by failure to follow Door Use & Care Guide or failure to perform normal maintenance.
Should a Captiva Wood Door fail to conform to this warranty after written notice, within 60 days we will, at our option, either repair the door, provide a replacement door in the same condition as originally delivered by us or refund the original purchase price. In no event shall we be responsible for paying for or performing the work to install or finish a replacement door, all of which shall be the sole responsibility of the per-son making the warranty claim
DOOR USE AND CARE GUIDEA. DOOR CARE1. Upon receipt of shipment of doors inspect each door for any visible defects.2. Do not drag across one another or across other surfaces. Store doors flat on a level surface in a dry, well ventilated building. Cover doors
to keep clean but allow air circulation. Do not store in direct sunlight.3. Doors should not be exposed to excessive heat, excessive dryness, humid conditions or sudden changes therein. They should be condi-
tioned to average prevailing relative humidity of the locality before installation.
B. PREPARATION FOR FINIShING1. Doors must be sealed no more than 24 hours after installation.2. Before finishing, sand all surfaces using 180 grit sandpaper. Always sand in the direction of the
grain. Remove all scuffs, handling marks, scratches, raised grain, burnishes and effects of expo-sure to moisture that may have occurred.
3. Before finishing, hang the door, then remove to finish properly.4. When finishing glazed doors, apply top coat generously to bridge between wood and glass. Lap
paint 1/16" to protect against moisture penetration.
C. FINIShING1. Choose only high quality finishes for these doors and carefully follow manufacturer’s instructions.2. In areas exposed to direct sunlight avoid use of dark stains or dark paint. Heat build up will drive
out moisture and cause shrinkage and checking. Most doors will accept stain more uniformly if a sanding sealer or conditioner is used prior to sanding.
3. Carefully seal all edges including the top and bottom of the door and areas routed for hardware with a minimum of three (3) finish coats of a good quality paint or varnish. Avoid lacquer or poly-urethane based sealers without U.V. inhibitors for exterior use.
4. Top of all outswing doors must be flashed for weather.
D. MAINTENANCE1. Stains and clear finishes last longer if protected from sunlight and weathering.2. Inspect finish at least once per year. A complete and continuous finish must be maintained on all
surfaces of the door. Moisture protection at the top and bottom of exterior doors and around cut-outs must be maintained. Moisture may seep into the bottom of exterior doors unless periodically resealed.
3. Warranty: Failure to comply with these guidelines for handling, installation and finishing will negate any warranty claims for product performance by the manufacturer. When doors are replaced un-der warranty we are responsible to replace doors only in the condition originally delivered and are not responsible for refinishing.
REQUIRED OVERHANGDimension A (length of overhang) must be equal to or greater than ½ of dimension B (distance from bottom of door to the base of the overhang). Warranty is void without proper overhang.
A
B
WARRANTY SIZE LIMITATIONS:
Thickness Max Width Max Height
1-3/8 3/0 7/01-3/4 3/6 8/02-1/4 4/0 9/0
page 10
SECTION 08210 (New 2004 Masterformat number will be 081433)
STILE AND RAIL WOOD DOORS
ARCHITECTURAL SPEC
PART 1 GENERAL 1.01 WORK INCLUDED
A. Furnish stile and rail wood doors as described in door schedule and shown on drawings. General and Supple-mentary Conditions as described in Division 1 apply to this Section.
1.02 RELATED SECTIONS
A. Flush Wood Doors, Section 08210 B. Metal Doors and Frames, Section 08110 C. Millwork and Trim, Section 06200 D. Finish Hardware, Section 08710 E. Glazing, Section 08800 F. Painting, Section 09900
1.03 REFERENCES
A. AWI/AWMAC Quality Standards Illustrated (QSI), 7th Edition B. ANSI/W.D.M.A Quality Standards I.S. 1A-04
1.04 SUBMITTALS
A. Comply with Division 1 - Section 01300 submit 6 complete schedules including shop drawings for approval.
B. Indicate plans and elevations, materials, surface grain directions, profiles, assembly methods, joint details, fasten-ing methods, accessories, preservative treatments, and schedule of finishes.
C. Submit 3 samples of veneer, minimum of 6" x 6" illustrat-ing expected range of component finish color and/or grain. The sample shall bear identification of the project, architect or designer, general contractor, woodwork manufacturer, items to which the finish applies and the system utilized to attain the finish.
1.05 QUALITY ASSURANCE
A. Perform work in accordance with AWI Section 1400 [Pre-mium] [Custom] [Economy] Grade quality. (choose one)
B. Work in this section shall comply with the specified Grade(s) of Work and Section (s) of the current edition of the AWI/AWMAC Quality Standards Illustrated or the cur-rent edition of W.D.M.A. Quality Standards
1.06 QUALIFICATIONS
A. Manufacturers who adhere to the standards of the Archi-tectural Woodwork Institute (AWI), Architectural Woodwork Manufacturers Association of Canada (AWMAC) and the Window and Door Manufacturers Association (WDMA) and are familiar with these standards.
1.07 DELIVERY, STORAGE AND HANDLING
A. Comply with Division 1- Section 01600. B. Store doors on a flat level surface, in a clean, dry, well ven-
tilated area. Keep doors a minimum of 3½" off floor. C. Doors shall not be exposed to excessive heat, moisture,
dryness or direct sunlight. D. Break any protective plastic packaging on site to permit
ventilation. E. Ensure that the top, bottom and any cut-outs on doors are
sealed immediately after removal of protective packaging. F. Handle doors with clean, dry hands and/or gloves. G. Do not drag doors across one another.
1.08 WARRANTY
A. Comply with Division 1 – Section 01780 B. Provide [two] [five] year warranty for all doors. C. Include coverage for defective materials, including toler-
ances for warp and delamination of materials. D. Include removal and re-hanging of doors found to be
defective PART 2 PRODUCTS 2.01 MANUFACTURERS
A. CAPTIVA as Manufactured by North Atlantic Corp. Somer-set MA, (508) 235-4397
B. The Maiman Company C. Eggers Industries D. Approved equal (Approved 6 days prior to bid)
Door construction, unless specified differently shall include a stave core method that uses a laminated stable wood core sandwiched between veneers. Captiva Traditional Doors use 1/4" solid veneers on all stiles and rails with matching edges to help prevent warp or distortion. Captiva Select Doors use laminated stable wood cores sandwiched between 1/8" veneers for stiles only. Rails will be solid. A unique “beaded tenon” inserted by hand is used instead of dowels creating a similar mortise and tenon connection on all stiles and rails. All raised panels used in both methods shall be manufactured using double panel technology, which virtually eliminates cracking panels by allowing independent movement. Both types of construction are time tested methods and backed by our full warranties.
Multi-lite doors, as true divided lite (TDL), available in Captiva Traditional or Select, with 1/8" single pane or 5/8" IG glass, and wood stops ap-plied to the exterior. Muntin bar widths are 1", 1-1/8", and 1-3/8". Simulated divided light (SDL) with 7/8" SDL bar, and 11/16" duplex muntins. Wood bars applied to both faces of door with the loose stop toward the exterior. SDL is available in Captiva Select doors only.
CONTINUED ON NEXT PAGE >
page 11 ARCHITECTURAL SPEC (CONT.)
2.02 DOOR CONSTRUCTION
A. Interior non-rated Doors
1. Stiles and rails shall be constructed of Stave Lumber Core material laminated with a minimum ¾" solid hardwood edge and a minimum [1/8"] [1/4"] “A” grade veneer.
2. Cope and stick joinery of stiles and rails using ½" x 4" dowels. Joints to have a minimum of 1 dowel.
3. Muntin bars shall have ¼" x 2½" dowels at every joint.
4. Pressure fit joints using type 2 water resistant glue. 5. Panels shall be manufactured using a double panel
construction of solid wood. 6. Flat panels shall have a minimum thickness of 5/8" 7. Raised panels shall have a minimum thickness of 1
1/2". 8. Panel raise shall be constructed of solid lumber
(matching face veneer) and rim banded with mitered corners
9. Louvers shall be 3/8" x 2¼" solid lumber or solid MDF for paint grade. Louver slats shall be mortised into stiles and assembled individually.
B. Exterior Doors
3. Stiles shall be constructed of Stave Lumber Core
material laminated with a minimum [1/8”] [1/4”] “A” grade veneer
4. Rails shall be solid lumber construction 5. Cope and stick joinery of stiles and rails using ½” x
4” dowels. Joints to have a minimum of 1 dowel 6. Muntin bars shall have ¼" x 2½" dowels at every
joint. 7. Pressure fit joints using type 1 waterproof glue and
silicone caulk to prevent moisture penetration. 8. Flat Panels shall be constructed of an exterior grade
core with a minimum overall thickness of 5/8". 9. Raised panels shall be constructed of an exterior
grade core with a minimum overall thickness of 1 5/8".
10. Panel raise shall be constructed of solid lumber (matching face veneer) and rim banded with mitered corners.
2.03 FABRICATION
A. Fabricate to AWI Section 1400 [Premium] [Custom] [Econ-omy] Quality Standards. (choose one)
B. Hardware cutouts are to be pre-machined by the manu-facturer. Hinge screw pilot holes shall be prepped by door manufacturer at factory.
C. When necessary to cut and fit on site, provide materials with ample allowance for cutting. Reseal or refinish any machining alterations required at jobsite prior to installation
2.04 FINISHING MATERIALS AND APPEARANCE
A. Doors for field finishing. B. Raised panel tongues are to be primed prior to assembly
when doors are to be painted on-site. PART 3 EXECUTION 3.01 INSTALLATION
A. Install work in accordance with AWI Quality Standards Sec-tion 1700 and NFPA 80 Fire Doors and Windows.
B. Doors and frames must be installed plumb, square and level.
C. Clearance between door edges and door frame shall be a minimum of 1/16" on hinge edge and 1/8" on the latch edge and top rail.
D. Contractors and their personnel engaged in the work shall be able to demonstrate successful experience with work of comparable extent, complexity and quality to that shown and specified.
3.02 ADJUSTING
A. Adjust work under provisions of AWI Quality Standards Section 1700.
B. Ensure that doors swing freely and do not bind in their frame. Adjust the finish hardware for proper alignment, smooth operation and proper latching without necessary force or excessive clearance.
END OF SECTION
V-GROOVE AND BEADED PANELSAdd craftsman style to your door with our V-Groove or Beaded panel option. The panels of any door that we offer can be carved with this decora-tive option. See the opposite page for a handful of door designs that are commonly given V-Grooved or Beaded panels.
Note: Flat panel doors with V-Groove or Bead are for interior use only. Raised panel doors with V-Groove or Bead are for both interior and exte-rior use.
Ordering information
When specifying, V-Grooved or Beaded Panels, use the letter “V”
after the door style number for V-Grooved panels and the letter
“B” after the door style number for Beaded Panels. V-Groove
Beaded
V-GROOVE AND BEADED DOORS
8021V/B
8001V/B 8003V/B 8007V/B 8009V/B 8020V/B
8338V/B
8021AV/B 8333V/B 8314V/B 8316V/B 8316AV/B
8392V/B 8393V/B 8394V/B
8150V/B
8388V/B 8389V/B 8389AV/B 8391V/B 8390V/B
8704V/B 8706V/B 8708V/B8707V/B
Square Top available
Arched Top available
Round Top available
Double Door Arched Pair available
Quick Ship Door (available in 3 weeks or less)
Click on any of the door styles below for more information
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8150V/B
RESIDENTIAL SPECIFICATIONS:
6116
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8001V/B
RESIDENTIAL SPECIFICATIONS:
5
912
55
VARIES
VARIES
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8003V/B
RESIDENTIAL SPECIFICATIONS:
5
VARIES
912
5VARIES5
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8007V/B
RESIDENTIAL SPECIFICATIONS:
5
VARIES
912
5VARIES5
812
36
LOCK RAIL
212
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8009V/B
RESIDENTIAL SPECIFICATIONS:
5
VARIES
912
5VARIES5
812
36
LOCK RAIL
212
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8020V/B
RESIDENTIAL SPECIFICATIONS:
5
VARIES
912
5VARIES5
5
VARIES
5
VARIES
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8021V/B
RESIDENTIAL SPECIFICATIONS:
5
VARIES
912
5VARIES5
5
VARIES
5
VARIES
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8021AV/B
RESIDENTIAL SPECIFICATIONS:
5
VARIES
912
5VARIES5
5
VARIES
5
VARIES
434
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8314V/B
RESIDENTIAL SPECIFICATIONS:
912
5VARIES5
VARIES
5
VARIES
5
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8316V/B
RESIDENTIAL SPECIFICATIONS:
912
5VARIES5
VARIES
5
VARIES
5
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8316AV/B
RESIDENTIAL SPECIFICATIONS:
912
5VARIES5
VARIES
5
VARIES
5434
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8333V/B
RESIDENTIAL SPECIFICATIONS:
912
5VARIES5
36
LOCK RAIL
812
VARIES
5
212
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8388V/B
RESIDENTIAL SPECIFICATIONS:
912
5VARIES5
VARIES
812
VARIES
5
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8389V/B
RESIDENTIAL SPECIFICATIONS:
912
5VARIES5
VARIES
812
VARIES
5
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8389AV/B
RESIDENTIAL SPECIFICATIONS:
912
5VARIES5
VARIES
812
VARIES
5434
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8390V/B
RESIDENTIAL SPECIFICATIONS:
5VARIES5
5
VARIES
812
VARIES
912
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8391V/B
RESIDENTIAL SPECIFICATIONS:
5VARIES5
5
VARIES
812
VARIES
912
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8392V/B
RESIDENTIAL SPECIFICATIONS:
5VARIES5
5
VARIES
5
VARIES
912
5
5
5
VARIES
*
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8393V/B
RESIDENTIAL SPECIFICATIONS:
5VARIES5
5
VARIES
812
VARIES
912
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
DOOR SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 6"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
ShAPE OPTIONS:
Square Top, Arch Top
Double Door Arched Pair
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8394V/B
RESIDENTIAL SPECIFICATIONS:
5VARIES5
5
VARIES
812
VARIES
912
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
SIDELITE SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 3"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8704V/B
RESIDENTIAL SPECIFICATIONS:
5
VARIES
5
VARIES
912
212
VARIES
212
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
SIDELITE SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 3"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8706V/B
RESIDENTIAL SPECIFICATIONS:
5
VARIES
212
VARIES
212
36
INTERMEDIATE
RAIL
812
912
212
SIDELITE SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 3"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8707V/B
RESIDENTIAL SPECIFICATIONS:
212
VARIES
212
5
VARIES
5
VARIES
912
*
*
*Dimension can be specified or automatically generated in proportion to the door height.
SIDELITE SPECIFICATIONS
SELECT SERIESJOINERY: Beaded Mortise and Tenon
STILES: Stave Core with 1/8" Veneers
RAILS: Solid Wood
WARRANTY: 2 Year, optional 5 Year
TRADITIONAL SERIESJOINERY: Traditional Mortise and Tenon
STILES: Stave Core with 1/4" Veneers
RAILS: Stave Core with 1/4" Veneers
WARRANTY: 5 Year
SIZES:
THICKNESS: 1-3/8", 1-3/4", 2-1/4"
MAX WIDTH: 42" MAX HEIGHT: 96"
For doors over 3/0 x 7/0, use commercial
specs. Larger doors are not warranted
against warp. See page 9 for details
SPECIES:
Sapele Mahogany, Honduras Mahogany,
Spanish Cedar, Fir, Eastern White Pine,
Poplar, White Oak, Red Oak, Maple,
Cherry, Ash, Walnut
Custom species available upon request
PANEL OPTIONS:
Bevel Panel, Ogee Panel, Scoop Panel, Flat
Panel, V-Groove, Beaded
See page 5 for details
STICKING OPTIONS:
Ovolo Sticking, Square Sticking, Bevel
Sticking, Applied Moulding, Bolection
Moulding
See page 6 for details
GLASS OPTIONS:
Insulated Authentic Divided Lite
Insulated Simulated Divided Lite
Single Pane Authentic Divided Lite
MUNTIN BAR OPTIONS:
Ovolo, Square, Bevel
1-3/8", 1-1/8", 1", 7/8"
See page 7 for details
COMMERCIAL SPECIFICATIONS:
STILES: 3"
TOP RAIL: 7"
BOTTOM RAIL: 10"
LOCK RAIL: 39"
address1255 GAR HighwaySomerset, MA 02726
phone 508.235.4397
fax 508.235.4436
web www.captivawooddoors.com
door style 8708V/B
RESIDENTIAL SPECIFICATIONS:
212
VARIES
212
5
VARIES
5
VARIES
912
*
*
*Dimension can be specified or automatically generated in proportion to the door height.