carbide & diamond bur catalog - defend › ... › defend-bur-catalog-2015.pdfdiamond bur grits and...
TRANSCRIPT
-
www.defend.com
Carbide &Diamond BurCatalogwith Reference Guide
-
01
Carbide Bur Shanks and Head Sizes 02
Carbide Bur Product Listing 03
Diamond Bur Grits and Shapes 04
Diamond Bur Numbering System 05
Diamond Bur Product Listing 06-07
Usage and Maintenance 08
Diamond Bur Cross-Reference Chart 09-10
Diamond BurFeatures & Benefits
Precision centeredJapan-made stainless steel #303
German electroplatingtechnology
Minimal pressurerequired on turbine
Concentric, balanced burwith long lasting
cutting ability
Maximum precision andminimum vibration
Superior cutting e�ciencyand long instrument life
Rapid, smooth andcomfortable cutting
10 Burs Per Blister Pack
Carbide BurFeatures & Benefits
Made of AustrianCarbide
Exceeds theInternational Standard
Gives a fast, smoothvibration free performance,reducing patient discomfort
as well as operative time
Less stress on the handpieceand reduces the risk of
early chuck failure
This produces a longerlasting, durable bur,
which is cost e�ective andand a better value for the money
100% inspected by infrared
10 Burs Per Blister PackBulk Packs of 100 Available
-
www.defend.com 02
• For use in high speed handpieces and friction grip low speed contra angle heads.• Has the smallest diameter shank of all the types of carbide burs; the end of the shank is smooth and is held in place in the handpiece by friction against a chuck.• Short shank for use in miniature head handpiece.
FG 1.60mmFG SHORT SHANK 1.60mm
16mm 19mm 25mm
FG LONG 1.60mm
The three main types of shanks are Friction Grip(FG), Right Angle(RA) (also known as Latch-Type),and Handpiece (HP). It is important to know which type of shank you want when choosing a burbecause each type is designed to fit into a certain type of handpiece.
FRICTION GRIP
• For use in latch-type contra angle heads in low speed handpieces.• Has a notch on the end allows a hook to latch onto it in the head of the handpiece.• Provides greater control when cutting dentin or enamel.
22mm
RA 2.35mm Shank Diameter
RIGHT ANGLE/LATCH-TYPE (RA)
Per ISO standards the diameter of a rotary instrument is defined as the widest part of thecutting surface.
HEAD DIAMETER / SIZES
0050.5
0.020
0070.7
0.028
0080.8
0.031 0.035
0090.9
0.0391.0
0141.2
0.0471.4
0.055
0161.6
0.063 0.071 0.083 0.091
0181.8
0212.1
0232.3
1/10mmmm
inches
1/10mmmm
inches
0313.1
0.122 0.130 0.138 0.148 0.157 0.165 0.177 0.185 0.197 0.217 0.236 0.256 0.276 0.295 0.315
0333.3
0353.5
0373.7
0404.0
0424.2
0454.5
0474.7
0505.0
0555.5
0606.0
0656.5
0707.0
0757.5
0808.0
0060.6
0.024 0.098
0252.5
0.106
0272.7
0.114
0292.9
010 012
Diamond Bur Diameters
Types of Carbide Bur Shanks
-
03www.defend.com
Carbide Operative Burs
PEAR
U.S. No. 329 330 331 332
0.60 0.80 1.00 1.20
FG
FG SS
FLAT FISSURE PLAIN CUT
U.S. No. 56 57 58Diameter (mm) 0.90 1.00 1.20
FG
FG SS
FLAT FISSURE CROSS CUT
U.S. No.Diameter (mm) 0.90 1.00 1.20
FGFG SS
RA
556 557 558
FLAT FISSURE CROSS CUT(LONG HEAD)
558L557LU.S. No.Diameter (mm) 1.00 1.20
FG
AMALGAM PREP
U.S. No.
Diameter (mm) 0.80
FG
245
INVERTED CONE
Diameter (mm)Diameter (mm)
0.70 0.80 1.00 1.40
FG
RA
U.S. No. 33.5 34 35 37
ROUND
U.S. No. 1/40.50 0.70 0.80 1.00 1.40 1.80 2.30
1/2 1 2 4 6 8
Diameter (mm)FG
RA
TAPER FISSURE PLAIN CUT
TAPER FISSURE PLAIN CUT (LONG HEAD)
U.S. No.
U.S. No.
169
169L
170
170L
171
171L
Diameter (mm)
Diamter (mm)
0.90
0.90
1.00
1.00
1.20
1.20
FG
FG
TAPER FISSURE CROSS CUT
U.S. No. 699 700 701 702 703
Diamter (mm) 0.90 1.00 1.20 1.60 2.10
FG
RA
TAPER FISSURE CROSS CUT(LONG HEAD)
U.S. No. 700L 701L
Diamter (mm) 1.00 1.20
FG
DOMED FISSURE PLAIN CUT
DOMED FISSURECROSS CUT
U.S. No.
U.S. No.
1156 1157
1557
1158
1558
Diamter (mm)
Diamter (mm)
0.90 1.00
1.00
1.20
1.20
FG
FG
END CUTTING BURS
U.S. No. 957
Diamter (mm) 1.00
FG
958
1.10
Carbide Trimming and Finishing Burs
TAPER POINTED
U.S. No. 12 Flutes
0.14
7612
Diameter (mm)
TF 12 Flutes
Egg: For contouring and �nishing occlusal andlingual surfaces.
EGG
U.S. No. 12 Flutes 7404
1.40 1.80 2.30
7406 7408
Diameter (mm)
TF 12 Flutes
FLAME
U.S. No. 12 Flutes
1.40
7104
Diameter (mm)
TF 12 Flutes
Needle: For Contouring and �nishing interproximalmargins, Occlusal margins, facial Surfaces andcavosurface margins.
NEEDLE
U.S. No. 12 Flutes 7901
0.90 1.00 1.20
7902 7903
Diameter (mm)
TF 12 Flutes
Round: For caries excavation, cavity preparation, and root canal access. Smaller sizes often used for single surface cavities, medium sizes oftenused for interproximal cavities in anterior teeth.
Inverted Cone: For producing undercuts in cavity preparations; slightly rounded edges on the blade corners reduce chipping for a smoother cut. Ideal for amalgam removal; may also be used to contour the occlusal anatomy of �nal restorations and for �attening pulpal and gingival walls.
Pear: For contouring the occlusal anatomy, preparing cavities, and removing amalgam. Produces an under-cut preparation with round internal line angles.
Domed Fissure Plain Cut/Domed Fissure Cross Cut: For producing a preparation with straight, parallel, or minimally divergent walls with round internal line angles. Also used to gain access to carious dentin, establish preparation form, and create retentive locks. Cross cut burs have more cutting edges.
Flat Fissure Plain Cut/Flat Fissure Cross Cut:For producing preparations with straight parallel sides and �at �oors, gaining access to carious dentin, establishing preparation form, and creating retentive locks. Cross cut burs have more cutting edges.
End Cutting: Used to produce a �at preparation�oor, re�ne preparations, and to mark the depth of bone reduction in crown lengthening. Help reduce any possibility of impacting the surface of the adjacent tooth with the cutting surface of a bur.
Taper Fissure Plain Cut/Taper Fissure Cross Cut: For producing a preparation with tapered, divergent walls and a �at �oor. Also used for inlay/onlay preparation and to section teeth and cut bone.Cross cut burs have more cutting edges.
Twelve bladed �nishing burs (7000 series) provide a smooth �nish on composite, amalgam,enamel, dentin, orthodebonding, and other dental materials. Best for controlled contouring and �nishing.
-
www.defend.com04
Diamond burs also come in a variety of grit sizes. Coarse and super-coarse diamond grits for tooth reductionare the most popular, while �ne and super-�ne for polishing and smoothing are less popular. Grinding andpolishing diamonds should be used to trim and �nish micro-�lled composites. Coarse grinding tools leavebehind striations; �ne and extra �ne diamonds are suitable for �nishing.
Diamond Bur Grits
Diamond Bur Shapes
Code
SF
F
M
C
SC
Description
Super Fine
Fine
Medium
Coarse
Super Coarse
30
50
107-120
150-180
180-250
Description DescriptionShape ISO Shape ISO
Barrel Pear811 822, 830037, 038
146, 156, 157, 158
552
019, 032
243, 257, 277
150
108, 109, 110, 111, 141
169, 170, 171, 172, 173
297, 298
511, 512, 513
465
010, 225
304
160, 170, 171, 172,173, 198, 199
247, 248, 249, 250,254, 297, 298
835KR, 836KR, 837KR,880, 881, 881KS
834
806, 813
368, 369, 379
839, 840
390, 860, 861, 862, 863
835, 836, 837
845, 846, 847, 848
877K, 878K, 879K
651, 652, 654, 655
392
805, 807
825
852, 858, 859, 859L, 889
Cylinder RoundedShoulder
Depth Cutting
Double InvertedCone
Egg Football
End Cutting
Flame
Flat End Cylinder
Flat End Taper
Gingival Cureliage
Gross Reduction
Inter Proximal
Inverted Cone
Knife Edge
Needle
Pointed Cylinder
Round
Round+Neck
Surgical LengthRound
Round End Cylinder
Round End Taper
Round Wheel
Safe End
Separation
Specials - Cool Cut
Taper RoundedShoulder
Torpedo Cylinder
Wheel
X-Mas Tree
879, 884, 885, 886
801
802
801L
838, 881
849, 850, 850L, 855,855L, 856, 856L
909
851
889
T368, T850, T855,T855L, T862, T863
845KR, 846KR, 847KR
877, 878, 879
818
852
237, 238, 239
129, 130, 131
001
002
001(316)
139, 141
196, 197, 198, 199
066, 067, 068
220
169, 540
197, 199, 249, 257
544, 545, 546
288, 289, 290
041, 042
161
-
05
Diamond Bur Grits
www.defend.com
A formal International Standards Organization (ISO) coding system has been established to simplifyidentification and ordering of all burs. An example of the ISO coding system is as follows:
Maximum diameter of cutting head
Indication of totalbur length
Head shape(e.g. round,inverted cone etc)
Indication of gritsize (e.g. coarse-green,�ne-red, etc)
Indication ofmaximum headdiameter in 1/10thsmm.
805
A. B. C. D.
016 MEDIUM
ISO Bur Head Sizes
THE ISO NUMBERING SYSTEM
B
C
ISO Bur Shanks
M = Normal/Medium BLUE
SC = Super Coarse BLACK
C = Coarse GREEN
F = Fine RED
SF = Super Fine YELLOW
009 0.9mm
010 1.0mm
012 1.2mm
014 1.4mm
016 1.6mm
018 1.8mm
021 2.1mm
023 2.3mm
025 2.5mm
027 2.7mm
029 2.9mm
031 3.1mm
033 3.3mm
3.5mm035
3.7mm037
4.2mm042
4.5mm045
4.7mm047
5.0mm050
5.5mm055
6.0mm060
6.5mm065
7.0mm070
7.5mm075
8.0mm080
10.0mm100
A
-
www.defend.com06
Diamond Burs
ROUND END TAPER
Code 850.012
1.2
10.0 10.0 10.0 10.0 8.08.08.0
C C C C C C C
SCSCSC
C
1.4 1.6
850.014 850.016 850.018 856.012 856.014 856.016
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.8 1.2 1.4 1.6
MMM
C
MM M M
F FSF
F
ROUND END TAPER CONTINUED
Code
8.0
9.0 9.0
SC SC
SC SC SC SC
C
F
C C
2.5
1.6
856.025
856L.016 856L.018
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.8
M M
8.0
852.010
1.0
9.0
SC
856.018
1.8
M
F
C
8.0
856.021
2.1
9.0
C
1.4
856L.014
M
NEEDLE
Code 858.010
1.0
8.0 8.0 8.0 10.0 10.0 10.0
C C C
FFFF F F
1.2 1.4
858.012 858.014 859.010 859.012 859.016
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.0 1.2 1.6
FLAME
Code
4.0 6.0 8.0 8.0 10.0 10.0 10.0
C C C
F FF FFF
F
SF SF SFSF
C
1.0 1.4
860.010 861.014
6.0
1.2
861.012 862.012 862.014 863.010 863.012 863.016
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.2
8.0
861.016
1.6 1.4 1.0 1.2 1.6
M MM M
8.0
C
F
862.016
1.4
M M
M M M
M
M
M M
5.0
1.2
860.012
M
F
M
GINGIVAL CURETTAGE
Code
1.0
8.0 8.0 10.0 10.0
C C C C
1.2 1.2 Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.4
M M
BEVELED CYLINDER
Code 878.012
1.2
8.0 8.0
C
M
877.010
1.0
6.0
C
M
877K.012
1.2
6.0
C
1.4
878.014
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
SC SC
10.0
863.018
1.8
M
10.0
C
886-016
1.6
M
879-012
1.2
9.5
C
SF: Super Fine F: Fine M: Medium C: Coarse SC: Super Coarse
850.010
1.0
10.0
C
M
879-014
1.4
10.0
C
M
8.0
C
1.6
878K-016
M
8.0
C
1.2
878K-012885-010 885-012 886-012 886-014
-
07
Diamond Burs
www.defend.com
ROUND ROUND & NECK INVERTED CONE
DOUBLE INVERTED CONE BARREL LONG PEAR
Code Code
Code Code Code
805.12
806.012 811.033 830L.012
1.2
1.2 3.3 1.23.7
5.5 4.05.5
1.3
3.0
M
C C C
F
SF
C C C
M
C C C C C
SCSC
C C
F F
M
M
M M
F
M M
1.2 1.6
1.4
1.2 1.4
2.0
1.4 1.8
1.4 1.6
801.012 805.016
806.014 811.037
801.014 805.018801.016 807.014801.018 801.023 802.012 807.016
Diameter (mm) Diameter (mm)
Diameter (mm) Diameter (mm) Diameter (mm)
Head Length (mm) Head Length (mm)
Head Length (mm) Head Length (mm) Head Length (mm)
Super Fine Super Fine
Super Fine Super Fine Super Fine
Fine Fine
Fine Fine Fine
Medium Medium
Medium Medium Medium
Coarse Coarse
Coarse Coarse Coarse
Super Coarse Super Coarse
Super Coarse Super Coarse Super Coarse
1.6 1.4
1.6 3.0
1.8 2.3
2.3
1.2
1.2
C
M
802.014
1.4
1.4
C
M
802.016
1.6
1.6
1.6
1.8 4.0
M
M M
M M M
EGG/FOOTBALL
Code
F
M MM M M
F F F F
SF
CCC C
SC SC SC SCSC
C
SF SF SF
1.8
4.5
2.3
5.3
368.018 368.023 379.016 379.018 379.023
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.6
3.4
1.8 2.3
3.6 4.4
ROUND END CYLINDER
Code 838.009
0.9
8.0
F F
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
M
1.0
1.0
801.010 805.10
1.0
1.3
M
C
1.6
2.0
806.016
M
C
1.4
2.0
813.014
M
C
1.6
2.0
813.016
M
806.010
1.0
3.0
C
M
C
2.0
5.3
368.020
C
2.3
5.3
369.025
M M M M M M M MM
CCC
SC
CCCC
FLAT END CYLINDER
Code 835.008
0.8
4.0 4.0 4.0 4.0 5.6 6.0 8.0 8.0 8.0 8.0
1.0 1.2
835.010 835.012 835.014 836.012 836.014 837.012 837.014 837.016 837.018
Diameter (mm)
Head Length (mm)
Super Fine SF
Fine
Medium
Coarse
Super Coarse
1.4 1.2 1.4 1.2 1.4 1.6 1.8
FLAT END TAPER
Code
8.0 8.5 8.0 8.0 10.0 10.0
C C C C
1.4
847.014 847.016 847.018 848.010 848.016 848.018
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
1.6 1.8 1.0 1.6 1.8
MMM MM
SF: Super Fine F: Fine M: Medium C: Coarse SC: Super Coarse
M
INTER PROXIMAL
Code 392-016
1.6
5.0
SF
F
Diameter (mm)
Head Length (mm)
Super Fine
Fine
Medium
Coarse
Super Coarse
-
www.defend.com08
■ Sterilize all burs before each use■ Burs should be replaced frequently. A dull or damaged bur could result in reduced efficiency and possible harm to the patient■ Never force a bur into the turbine■ Observe recommended speeds and air pressure to avoid excessive heat
Bur Diameter (1/10mm)
007-014
016-023
025-045
047-065
066-094
Maximum RPM
FG
450,000
300,000
120,000
80,00060,000
HP
250,000
120,000
80,000
60,00040,000
■ Avoid putting pressure on the bur when in use■ Do not keep the bur still to avoid burning of the bur■ Always insert the bur fully into the handpiece chuck■ Always use sufficient water coolant■ Do not use a bur in a worn chuck to avoid slippage and/or vibration that can lead to breakage
Rotary Instrument MaintenanceCleaning■ Pre-soak the burs for at least 10 minutes in a disinfection solution that contains a corrosion inhibitor■ Use a brush to clean the burs■ Rinse thoroughly■ Dry the burs and store in a clean and moisture-free environment
Cleaning with UltraSonic■ Insert burs in bur holders■ Rinse thoroughly■ Dry and store in a clean and moisture-free environment
Sterilization■ Place the burs in sterilization bags■ Sterilize burs according to your autoclave manufacturer recommendations■ Dry the burs and store in a clean and moisture-free enviroment■ When using dry heat sterilization, sterilize at 170°C (340°F) for 1 hour. When used according to the manufacturer’s instruction, this will not corrode or dull carbide burs■ Avoid cold sterilizing solutions as they contain oxidizing agents which may weaken carbide burs■ Note: It is the responsibility of the user to ensure that the method of sterilization is effective
General Rotary Instrument Usage Tips
Usage and Maintenance
-
09
Diamond Burs Cross Reference ChartDEFEND Grit Henry Schein Brasseler USA Meisenger Axis SS White Midwest Premier NeoRound801–010M M 112–5177 – – – – – – –801–012M M 112–5178 004161U0 801–012 M801–012 – 471010 – 0112M801–012C C – 004781U0 801G–012 C801–012 – 471019 115C –801–014M M 112–5179 004162U0 801–014 M801–014 91002 471011 – –801–014C C 112–5185 004782U0 801G–014 C801–014 – 471020 – –801–016M M 112–5181 004163U0 801–016 M801–016 – 471012 – 0116M801–016C C 112–5126 004783U0 801G–016 C801–016 – 471021 120C 0116C801–018F F – – – – – – – –801–018M M 112–5182 004164U0 801–018 M801–018 91003 471013 – 0118M801–018C C – 004784U0 801G–018 C801–018 91004 471022 125C 0118C801–023SF SF – – – – – – – –801–023F F – – – – – – – –801–023M M 112–5184 – – – – – – –801–023C C 112–5127 – – – – – – –Round & Neck802–012M M 112–5186 – – – – – – –802–012C C – – – – – – – –802–014M M 112–5187 – – – – – – –802–14C C 112–5190 – – – – – – –802–16M M 112–5188 – – – – – – –802–016C C – – – – – – – –Inverted Cone805–010M M 112–5191 – – – – – – –805–012F F 112–5192 – – – – – – –805–012M M 112–5192 – – – – – – –805–016M M 112–5193 – – – – – – –805–016C C – – 805G–016 C805–016 91012 – 315.1.75C 0316C805–018F F – – – – – – – –807–014M M 112–5206 – 807–014 – – – – –807–016M M 112–5207 004236U0 807–016 M807–016 – 471055 – –807–016C C 112–5208 – – – – – – –806–010M M 112–5196 – – – – – – –806–010C C – – – – – – – –806–012M M 112–5199 – – – – – – –806–014C C – – – – – – – –806–016M M 112–5201 – – – – – – –806–016C C 112–5205 – – – – – – –Double Inverted Cone806–012C C 112–5202 004797U0 806G–012 C806–012 91016 – 390.3C –806–014M M 112–5200 004225U0 806–014 M806–014 – – – –Barrel811–033C C 112–5128 017277U0 811G–033 C811–033 – 471060 230C 2133C811–033SC SC 112–5129 – – – – – – –811–037C C 112–6242 017278U0 – C811–037 – 471061 234C 2137C811–037SC SC 112–6243 012925U0 – SC811–037 – 471063 – –813–014M M 112–5214 – – – – – – –813–014C C – – – – – – – –813–016M M 112–5213 – – – – – – –813–016C C – – – – – – – –Pear830L–012M M – 004954U0 – M830L–012 – – – –830L–012C C – – – – – – – –Egg/Football368–018SF SF 112–5174 – – SF368–018 – – – –368–018F F 112–5102 – – F368–018 – – – –368–018M M 112–5173 – – M368–018 – – – –368–018C C 112–5103 – – C368–018 – – 290.4C –368–018SC SC – – – – – – – –368–020C C – – – – – – – –368–023SF SF 112–5104 005256U0 – SF368–023 – 471414 – 3923VF368–023F F 112–5105 004960U0 – F368–023 91143 471415 – 1923F368–023M M 112–5106 004085U0 – M368–023 – 471416 – 1923M368–023C C 112–5108 004768U0 – C368–023 – 471417 285.5C 1923C368–023SC SC 112–5109 015169U0 – SC368–023 – 471418 – –369–025C C 112–5110 – – – – – – –379–016F F 112–5113 004965U0 – F379–016 – 471422 – –379–016M M 112–5114 – – – – – – –379–016C C 112–5115 – – – – – – –379–018SF SF 112–5117 – – – – – – –379–018F F 112–5118 017165U0 – F379–018 – 471423 – 1908F379–018M M 112–5175 004092U0 – M379–018 – 471424 – –379–018C C 112–5119 – – C379–018 – – 290.4C 1908C379–023SF SF 112–5296 005258U0 – SF379–023 – 471399 – 3900VF379–023F F 112–5121 004967U0 – F379–023 – 471400 – 1900F379–023M M 112–5122 004093U0 – M379–023 – 471427 – 1900M379–023C C 112–5123 013889U0 – C379–023 91142 471428 287.4C 1900C379–023SC SC 112–5124 – – – – – – –Interproximal392–016SF SF – 005281U0 – SF392–016 – 471447 – –392–016F F 112–5125 004969U0 – F392–016 – 471448 203.5F 1416F392–016M M – – – – – – – –Flat End Cylinder835–008C C – – – – – – – –835–010M M 112–5219 004345U0 835–010 M835–010 – – – 0710M835–012M M 112–5220 – – – – – – –835–012C C 112–5222 004810U0 835G–012 C835–012 91032 – 514.3C 0712C835–014M M 112–5221 – – – – – – –836–012SF SF – – – – – – – –836–012M M 112–5223 – – – – – – –836–014M M – – – – – – – –836–014C C 112–5224 – – – – – – –837–012M M – 004368U0 837–012 M837–012 – 471086 – –837–012C C – 004818U0 837G–012 C837–012 91035 471089 515.7C 0712.7C837–014M M 112–5225 004369U0 837–014 M837–014 – 471087 – –837–014C C 004819U0 837G–014 C837–014 91036 471090 515.8C –837–014SC SC – – – – – – – –837–016M M 112–5226 004370U0 837–016 M837–016 – 471088 – –837–016C C 004820U0 837G–016 C837–016 91037 471091 516.7C 0716.8C837–018M M – – – – – – – –837–018C C 112–5227 – – – – – – –Round End Cylinder838–009M M 112–5218 – – – – – – –Flat End Taper847–014F F – – – – – – – –847–014M M – – – – – – – –847–014C C – 004836U0 847G–014 C847–014 91055 471128 702.8C 0914.8C847–016F F – – – – – – – –847–016M M 112–5232 004418U0 847–016 M847–016 – 471125 – 0916.8M847–016C C 112–5138 004837U0 847G–016 C847–016 91056 471129 722.8C 0916.8C847–018M M 112–5233 – – – – – – –848–010M M – – – – – – – –848–016M M 112–5234 004425U0 848–016 M848–016 – 471154 722.10M 0916.10M848–016C C – 004842U0 848G–016 C848–016 91058 471158 722.10C 0916.10C848–016SC SC – – – – – – – –848–018C C 112–5236 – – – – – – –848–018SC SC – – – – – – – –
-
Diamond Burs Cross Reference Chart
www.defend.com10
DEFEND Grit Henry Schein Brasseler USA Meisenger Axis SS White Midwest Premier NeoRound End Taper850–010C C – – – – – – – –850–012M M – – – – – – – –850–012C C 112–5139 – 850G–012 C850–012 – – 781.10C 1112.10C850–012SC SC – – – – – – – –850–014M M – – – – – – – –850–014C C 112–5140 004850U0 850G–014 C850–014 – 471174 781.10C 1114.10C850–014SC SC 850–016F F – 015979U0 850F–016 F850–016 – 471168 – 1116.10F850–016M M – – – – – – – –850–016C C 112–5141 004851U0 850G–016 C850–016 – 471175 782.10C 1116.10C850–016SC SC – – – – – – – –850–018SF F – – ? ? – – – –850–018F F – – 850F–018 F850–018 – – – –850–018M M 112–5237 004450U0 850–018 M850–018 – 471172 – –850–018C C 112–5238 004852U0 850G–018 C850–018 – 471176 770.10C –850–018SC SC – – – – – – – –852–010M M 112–5239 – – – – – – –852–010C C – – – – – – – –856–012C C 112–5144 004862U0 – C856–012 – 471207 781.8C 1112.7C856–012SC SC 112–5145 – – – – – – –856–014M M 112–5147 – – – – – – –856–014C C 112–5148 004863U0 – C856–014 – 471208 782.6C 1114.8C856–014SC SC 112–5149 856–016F F 112–5150 005041U0 – F856–016 91116 471198 – 1116.8F856–016M M 112–5151 004488U0 – M856–016 91068 471203 – 1116.8M856–016C C 112–5152 004864U0 – C856–016 91069 471209 782.8C 1116.8C856–016SC SC 112–5153 004745U0 – SC856–016 – 471215 – –856–018F F 112–5154 001734U0 – F856–018 91117 471199 – 1118.7F856–018M M 112–5244 004489U0 – M856–018 – 471204 – –856–018C C 112–5155 004865U0 – C856–018 91070 471210 770.8C 1118.7C856–018SC SC 112–5156 004746U0 – SC856–018 – 471216 – –856–021C C – – – – – – – –856–025C C – 004866U0 – C856–025 – 471212 790.8C 2424C856L–014M M – – – – – – – –856L–014C C – – – – – – – –856–016M M 112–5158 – – – – – – –856L–016C C 112–5159 005304U0 – C856L–016 – 471241 770.9C –856L–016SC SC 112–5160 – – – – – – –856L–018F F – – – – – – – –856L–018M M – – – – – – – –856L–018C C 112–5161 005305U0 – C856L–018 – 471242 770.10C 1118.9C856L–018SC SC 112–5162 – – – – – – –Needle858–010F F – – 858F–010 F858–010 – – – –858–010M M – – – – – – – –858–010C C – – – – – – – –858–012F F – – – – – – – –858–012M M 112–5246 – – M858–012 – – – –858–012C C – – – – – – – –858–014F F – – – – – – – –858–014M M – 004495U0 858–014 M858–014 91071 471251 – 1314.8M858–014C C – 004868U0 858G–014 C858–014 91072 471253 207.7C 1314.8C859–010F F 112–5165 005046U0 859F–010 F859–010 – – 797.11F 13212.11F859–012F F – – – – – – – –859–016F F – – – – – – – –Flame860–010SF SF – – – – – – – –860–010M M 112–5255 004510U0 860–010 – 91078 – – –860–012F F – – – – – – – –860–012M M – – – – – – – –861–012M M 112–5256 – – – – – – –861–012F F 861–014M M – – – – – – – –861–016M M 112–5258 – – – – – – –862–012SF SF 005374U0 862C–012 SF862–012 91128 471260 – 3512.8VF862–012F F 005053U0 862F–012 F862–012 91121 471263 – 1512.8F862–012M M 112–5259 004520U0 862–012 M862–012 – 471267 – 1512.8M862–012C C 004878U0 862G–012 C862–012 91083 471271 261.8C 1512.8C862–012SC SC – – – – – – – –862–014SF SF 112–5260 – 862C–014 SF862–014 – – – –862–014F F 015568U0 862F–014 F862–014 – 471264 – –862–014M M – – – – – – – –862–014C C – 004879U0 862G–014 C862–014 91084 471272 260.8C 1514.8C862–014SC SC – – – – – – – –862–016F F – – – – – – – –862–016M M 112–5261 – – – – – – –862–016C C – – – – – – – –863–010F F 112–5167 – – F863–010 – – – –863–010M M – – – – – – – –863–012SF SF 112–5263 – – – – – – –863–012F F – 005056U0 863F–012 F863–012 – – – 1512.10F863–012M M 112–5262 004529U0 863–012 M863–012 – – 797.11M 1512.10M863–012C C 112–5168 004883U0 863G–012 C863–012 91086 – – 1512.10C863–016F F – – – – – – – –863–016M M 112–5264 004530U0 863–016 M863–016 – – – –863–016C C 004884U0 863G–016 C863–016 91088 – 253.10C –863–018M M – – – – – – – –Gingival Curettage877K–012M M 112–5294 – – – – – – –878K–012M M 112–5288 – – – – – – –878K–012C C – – – – – – – –878K–016M M 112–5290 – – – – – – –878K–016C C 005317U0 – C878K–016 – 471326 253.8C 1716.8CBeveled Cylinder877–010M M 112–5266 – – – – – – –877–010C C – – – – – – – –878–012M M 112–5267 004560U0 878–012 M878–012 – 471304 – –878–012C C 112–5169 004890U0 878G–012 C878–012 – 471307 511.8C 1800.8C878–014M M 112–5268 – – – – – – –878–014C C 112–5269 004891U0 878G–014 C878–014 – 471308 244.10C 1804.8C879–012M M 112–5271 – – – – – – –879–012C C – – – – – – – –879–014M M 112–5272 – – – – – – –879–014C C 112–5273 – – – – – – –885–010F F – – – – – – – –885–010M M 112–5280 – – – – – – –885–010C C – – – – 91104 – 248.8C –885–012C C – 004899U0 885G–012 C885–012 91105 471352 251.8C 1812.8C886–012C C – – – – – – – –886–014C C – 012181U0 886–012 M886–012 – – – 1812.10M886–016C C 112–5284 004901U0 886G–016 C886–016 91106 – – –
-
Mydent International is a proud supporter of OSAP, the Organization for Safety, Asepsis and Prevention. OSAP advocates for the safe and infection-free delivery of oral care. OSAP targets its message to dental and other healthcare professionals, academia, consultants, researchers and organizations that include non-governmental organizations (NGOs), government agencies, and even manufacturing and distribution companies -- it's a trusted resource for everyone who is responsible for safe dental care...because safety matters! Learn more at www.osap.org.
Mydent International is an accredited business with the Better Business Bureau (BBB) and has a prestigious A+ rating. Since 1985, we have committed ourselves to providing ethical business practices, honest advertising and safeguarding customer privacy.
Mydent International is proud to be a longtime member of the Dental Trade Alliance. The DTA is an association of companies that provide dental equipment, supplies, materials and services to dentists and other oral care professionals. Our member companies are distributors, dental laboratories & manufacturers located in the United States, Canada and Mexico. By providing the best equipment, materials and services to dentists and oral care professionals, we are partners in improving the oral health of everyone.
With Autism rates estimated as high as 1 in 91 children, Mydent feels compelled to take action. That is why a portion of the pro�ts from every DEFEND product sold will go to Autism Speaks. Founded in 2005, Autism Speaks has quickly grown to become the nation’s largest and most effective autism science and advocacy organization. They are dedicated to funding global biomedical research into the causes, prevention, treatments, and cure for autism. Mydent is proud to play a small part in helping them to change the future for all who struggle with autism spectrum disorders. We urge you to learn more at www.autismspeaks.org.
Mydent is also becoming an industry leader in environmentally responsible manufacturing and distribution practices. We are committed to a reduction of our carbon footprint, using earth-friendly materials and processes wherever possible. From recyclable and reduced packaging, high order practices, reducing emissions as well as “green” practices at our own headquarters, we are committed to a philosophy of being environmentally responsible…Today and Tomorrow.
Mydent Af�liations:
1st Edition 2016
80 Suffolk Court, Hauppauge, NY 11788800.275.0020 • FAX: 631.434.7750Ph: 631.434.3190 • EMAIL: [email protected]
www.defend.com
I S A PROUD MEMBER OF
JOIN OSAP.ASAPThe Organization for Safety, Asepsis and Prevention (OSAP) is the world’s leading advocate and trusted advisor for the safe and infection-free deliveryof oral health care.
The Safest Dental Visit™ is OSAP’s latest infection control educational program.
As an authority on infection control, OSAP has developed this program to helpdental practices:
• Offer patients The Safest Dental Visit™ - elevating their con�dence in the practice• Engage staff in a “culture of safety”• Enhance the overall image of the practice
It’s Like Having an Infection Control Partner! Visit: www.osap.org
Our Brand Promise
“To provide the healthcare professional with the highest
quality infection control products, disposables,
preventatives and impression material systems at
affordable prices, supported by Superior Service and 100%
Customer Satisfaction.”