Operational efficiency for fast turnaround of test results

Cardinal Health™ Centrifuges

1 2

Cardinal Health™ High Speed Microcentrifuge

Cardinal Health™ Mini Centrifuge

The Cardinal Health™ High Speed Microcentrifuge has a 12 place rotor and provides nearly silent operation. It has a compact, low profile design and it starts and stops with the closing or opening of the lid.

This high-speed microcentrifuge eliminates the need to change rotors when switching between microtubes and PCR strips (12 microtubes and/or 4 (eight position) PCR strips. It operates with fixed speed that produces 2,000 xg, simply close the lid and the unit quickly ramps up to 5500 rpm.

The Cardinal Health™ Mini Centrifuge is ideal for quick spin downs of microtubes and PCR tubes. Speed quickly reaches 6,000 rpm.

The Click-n-Lok instant rotor attachment eliminates the requirement for set screws and tools during rotor exchange: simply remove and attach rotors by hand, pulling or pressing the rotor onto the motor shaft.

• Dimensions: 4.5 x 5.9 x 4.5 in.• Eight position microtube rotor• Storage compartment for PCR rotor and 0.5 mL adapters• Decelerate in just one second• Clear or red lid available

Technical dataPower supply 100~120V/200~240V; 50/60 HzPower 100WMax. speed 15,500 rpmMax. centrifugal force 16,100 xgRPM/RCF YesTime 20sec ~ 99min/continuous

or momentaryMax. load 12 × 1.5/2.0 mL tubesMax. permitted density 1.2 g/mLAcceleration time to max. speed 12 secondsBraking time from max. speed 10 secondsAmbient temperature 35.6o – 95oF (2o – 35oC)

Dimensions (W×D×H) 10.6 x 8.7 x 5.9 in. (270 × 220 × 150 mm)

Weight (with rotor) 10.5 lbs. (4.8 kg) Warranty Two-year warranty

Cat. No. Description

CHC1612 High speed microcentrifuge 12 place rotor

CHC1008-6 Adapters for 0.5 mL tubes

CHC1008-61 Adapters for 0.2 mL tubes

12 place rotor with nearly silent operation

Cat. No. Description

CHC1008-C Mini centrifuge, clear lid 100-240V

CHC1008-R Mini centrifuge, red lid 100-240V

CHC1008-A5 Replacement adapter pack, 0.5 mL

CHC1005-A2 Replacement adapter pack, 0.2 mL

CHB1000-RE Replacment heating element, 230V

Technical dataSpeed 6000 rpm/2000 xgCapacity 8 x1.5/2.0 mL

32 x 0.2 mL or 4 x PCR stripsDimensions (W×D×H) 4.5 x 5.9 x 4.5 in.

(114 x 150 x 114 mm)Electrical 20V to 240V, 50-60 HzMax. radius 1.77 in. (49 mm)Warranty One year warranty

Eight place rotor comes pre-installed

Cardinal Health™ Benchtop Centrifuge 6F is a continuous-duty, electronically controlled centrifuge with a lid safety interlock system. The push-button timer is preset to 10 minutes for precision and ease of use. The swing-out horizontal rotor design produces separated samples while requiring no additional parts. Cool–Flow airflow design prevents overheating. Samples can be viewed safely through the transparent lid. The rotor and rotor accessories are rated for a rotation frequency of 4,000 rpm. Other features include advanced engineering composite resins for safety and durability; removable carbon fiber rotor for easy cleaning; and brushless permanent split capacitor AC motor.

Technical dataNominal speed (Horizontal) 3,380 (+/- 100) rpmNominal RCF (Horizontal) 1,600 (+/- 90) xgMaximum capacity (Horizontal) 60 mL (6 x 10 mL)*Dimensions (W×D×H) 8.75 x 11.75 x 14 in.

(222 x 298 x 356 mm)Motor 1/30 HP, p.s.c. motorMaximum acceleration time 10 secondsProtection breaker Amp. resettableTimer Electronic, 1 to 30 minutes

preset to 10 minutes, +/– 1%Current requirement 1.9 ampsVoltage requirement 115 (+/- 10) voltsFrequency 60 HzWeight 11 lbs. (4.99 kg)Warranty Two-year warranty

Cat. No. Description

CA018104 Benchtop Centrifuge 6F six-place horizontal rotor

Six 100 mm tube holders

Six 75 mm tube holders

Two 13 x 75 mm inserts

Two 13 x 100 mm inserts

Two 0.5 to 1 mL tube adapters

Two 1.5 to 2 mL tube adapters

* Maximum sample density is 1.15 grams/mL, (water density = 1.0 grams/mL)

Cardinal Health™ Benchtop Centrifuge 6F

3 4

Cardinal Health™ Benchtop Centrifuge 6V

The Cardinal Health™ Benchtop Centrifuge 6V is a continuous-duty, electronically controlled, variable-speed laboratory centrifuge equipped with a lid safety interlock system. It offers the user control over many parameters, including variable runtime, speed control and deceleration.

The exclusive horizontal rotor allows for quick and easy sample loading and complete horizontal separation. Samples can be viewed safely through the transparent lid. The 6V is controlled by five electronic push buttons and a backlit display for easily controlling centrifugation parameters.

Up to nine commonly used settings can be saved and recalled at the touch of a button.

Technical data

Speed range 1,000 – 3,800 (+/- 100) rpm

RCF range 114 – 2016 (+/- 90) xg

Maximum capacity 60 mL (6 x 10 mL)*

Overall dimensions (HxWxD) 8.75 x 11.75 x 14 in. (220 x 300 x 350 mm)

Weight 12 lbs. (5.4 kg)

Motor 1/30 HP, PSC motor

Nominal acceleration time 20 seconds

Protection 4 amp, resettable circuit breaker (x2)

Timer (642 VES) Electronic, 1 to 99 minutes, preset to 10 minutes +/- 1%

Power rating 200 watts

Voltage requirements 115/230 VAC (+/- 10%)

Frequency 50/60 Hz

Temperature during operation: 60° – 90°F (16° – 32°C)

Maximum relative air humidity 90%

Warranty Two-year warranty

Cat. No. Description

CA024104 Benchtop Centrifuge 6V six-carrier horizontal rotor*

Six 100 mm carriers*

Six 75 mm carriers*

One operator’s manual

One 10 ft. line cord

* The rotor and rotor accessories are rated for rotational frequency of 5,000 rpm.

Cardinal Health™ Benchtop Centrifuge 8V

Perform routine clinical and life science applications in one platform with the DualSpin™ rotor. This lightweight 8-place rotor is able to accommodate 1.4 mL to 15 mL tubes with two spacer options.

Run common clinical IVD blood tubes, gel tubes, 10mL standard syringes and 15 mL conical tubes in one centrifuge with just one rotor. Simply turn knob to secure rotor in place.

Program up to four sets of custom run parameters to easily and quickly perform your routine protocols. The centrifuge has three deceleration profiles including standard, soft and brake-off options, designed to optimize separation.

Cat. No. Description

CA75008801 Benchtop Centrifuge 8V

DualSpin™ rotor body

Swinging buckets (set of 8)

Green/short spacers (set of 8)

Yellow/long spacers (set of 8)

Technical dataMaximum capacity 8 x 10 mL (swinging bucket)Speed 300 – 4,900 rpm, adjustable

in increments of 100 rpmMaximum RCF 3,490 xg (swing out) Time setting 1-99 minutes, in increments

of 1 minute; HOLDTemperature during operation 35.6° – 104°F (2° – 40°C)Control system MicroprocessorProgram memory 4Acceleration profile 1 (standard) Deceleration profiles 3 (standard, soft, brake-off) Acceleration/deceleration rates* 24/31 seconds (swinging bucket) Noise level at maximum speed <56 dB(A) (swinging bucket)Power consumption 100-130 W, voltage dependentDimensions (HxWxD) 9.45 x 12.79 x 17.72 in.

(240 x 325 x 450 mm)Weight 34.1 lbs. (15.5 kg) Warranty Two-year warranty

5 6

Cardinal Health™ Benchtop Centrifuge 8HC

Technical data

Temperature during operation 35.6° – 95°F (2° – 35°C)

Running time 99 h 59 min 50 sec, hold

Maximum speed 16000 rpm

Minimum speed 300 rpm

Maximum RCF 24328 xg

Noise Level at maximum speed1 < 58 dB(A) (measured with a TX-150 rotor)

Maximum kinetic energy 8.12 kJ

Dimensions (HxWxD) 26/12 x 15 x 19 in.(660/310 x 370 x 490 mm)

Weight2 77 lbs. (35 kg)

Warranty Two-year warranty

Cat. No. Description

CA75100102 Benchtop Centrifuge 8HC TX-150 swinging bucket rotor

Round buckets (set of 4)

ClickSeal™ biocontainment lids for round buckets (set of 4)

Replacement O-rings for lids (set of 4)

Optimize bench space and maximize capacity with the Cardinal Health™ Benchtop Centrifuge 8HC. Smart, simple interface provides outstanding capacity in a compact design.

One-touch operation with pre-saved protocols. A highly visible backlit display for easy reading of parameters across the lab.

Auto-Lock™ rotor exchange provides secure push-button application versatility and cleaning convenience. ClickSeal™ biocontainment lids provide one-handed sample protection.

Maximized swing-out capacity allows operator to process up to 8 x 50 mL conical tubes, 24 x 5/7 mL blood tubes, and microtubes, all in one versatile centrifuge.

Cardinal Health™ Benchtop Centrifuge DASH 6

Cardinal Health™ Benchtop Centrifuge DASH 6 can dramatically improve the turnaround time for your chemistry samples and coags. Its high g-force capability provides three-minute sample separation and five-minute coags to improve lab efficiency.

The DASH 6 has three pre-programmed settings. clearly labeled by tube type, to meet the needs of the most demanding lean laboratories. The centrifuge will not run with the lid open, and the lid cannot be opened while samples are spinning. Firm mechanical latching of the lid prevents the escape of debris in case of tube breakage.

A clear shatterproof lid offers safe observation and access for photo tachometer made from a high strength polycarbonate. Advanced engineering composite resins provide maximum safety and durability with a higher strength- to-weight ratio than aluminum which helps reduce shipping costs.

Technical data

Maximum capacity (Horizontal) 60 mL (6 x 10 mL)*

Overall dimensions (H x W x D) 8 x 11 x 13.5 in. 203 x 279 x 343 mm

Centrifuge motor 1/2 H.P. brushless motor

Minimum acceleration time 20 seconds

Timer Electronic, 1 to 30 minutes, preset to 3 minutes, +/– 1%

Current requirement 1.3 – 2.7 amps

Voltage requirement 100 – 240 (+/- 10%) volts

Frequency 50/60 Hz

Weight 12 lbs. (5.4 kg)

Warranty Two-year warranty

Factory Settings

Tube Type RPM Time G-Force

BD Vacutainer Barricor™ 5500 3 4000

Coag (PPP) 5500 5 4000

Gel (SST/PST™) 3800 7 2000

Cat. No. Description

CA076104 Benchtop Centrifuge DASH 6 six-place horizontal rotor

75 – 100 mm tube holder

* Maximum sample density is 1.15 grams/mL, (water density = 1.0 grams/mL)

ClickSeal™ biocontainment lids provide one-handed sample protection.

1 Front side measurement, 1 m in front of the instrument at 1.6 m height2Without rotor

Auto-Lock and ClickSeal are trademarks of Thermo Fisher Scientific and its subsidiaries.

We are your lab partner.Expertise. Choice. Efficiency. Savings.

To learn more about Cardinal Health™ Centrifuges or to order,contact your Cardinal Health sales representative, call 800.964.5227 or visit cardinalhealth.com.

Auto-Lock, ClickSeal and DualSpin are trademarks of Thermo Fisher Scientific Inc.

© 2017 Cardinal Health. All Rights Reserved. CARDINAL HEALTH, the Cardinal Health LOGO and ESSENTIAL TO CARE are trademarks or registered trademarks of Cardinal Health. All other marks are the property of their respective owners. Lit. No. 2LAB17-632258 (02/2017)

Cardinal Health 7000 Cardinal Place Dublin, Ohio 43017

cardinalhealth.com